Total 501 Quality Assurance / Control job vacancies

Job Summary

We are looking for an experienced Senior Control and Software Engineer to lead the architecture, design, and implementation of advanced control systems and embedded software for next-generation Solid State Transformers (SST), high-power grid-tied inverters, and large-scale renewable energy integration platforms.

You will drive technical innovation in medium- and high-voltage power electronics for applications including data center electrification, utility-scale renewables, microgrids, EV charging infrastructure, and smart grid systems. This senior role involves end-to-end technical ownership—from control strategy definition and system modeling to real-time software implementation, validation, and field deployment—while mentoring junior engineers and influencing technology roadmap decisions.

Key Responsibilities

· Lead the development and optimization of real-time control algorithms for Solid State Transformers (multi-stage, multilevel, and resonant topologies) and grid-connected inverters operating in both grid-forming and grid-following modes.

· Architect and implement robust embedded software and firmware (C/C++) for DSP, FPGA, and multi-core microcontroller platforms, ensuring high-performance bi-directional power flow, fault management, and seamless grid interaction.

· Define and execute system-level modeling and simulation strategies using MATLAB/Simulink, PSCAD/EMTDC, or similar tools; drive automatic code generation and model-based design workflows for production systems.

· Lead renewable energy integration efforts, including PV, wind, and energy storage systems, with advanced techniques such as virtual synchronous machines (VSM), hierarchical power management, droop control, inertia emulation, and compliance with stringent grid codes (IEEE 1547, IEC 61727/62116, Grid Code requirements).

· Oversee Hardware-in-the-Loop (HIL), Power-Hardware-in-the-Loop (PHIL), and Controller Hardware-in-the-Loop (CHIL) testing campaigns; lead performance validation, stability analysis, and certification activities.

· Provide technical leadership across cross-functional teams (hardware, systems, test, and firmware) on protection schemes, communication architectures (IEC 61850, Modbus TCP, DNP3, OPC-UA), cybersecurity, and functional safety.

· Mentor and guide junior control/software engineers; conduct design reviews, establish best practices, and drive continuous improvement of the control software platform and architecture.

· Identify and solve complex technical challenges related to harmonics, resonance, grid disturbances, renewable intermittency, and high-power SiC/GaN-based converters.

· Contribute to R&D strategy, intellectual property (patents), technical publications, and product roadmap planning to maintain technology leadership in SST and renewable integration.

Required Qualifications

· Master’s or PhD in Electrical Engineering, Power Electronics, Control Systems, or a related field (PhD strongly preferred).

· 7+ years of hands-on industry experience in control and embedded software development for high-power power electronics, with direct involvement in inverters, DC-DC converters, or Solid State Transformers.

· Demonstrated expertise in:

o Advanced control techniques (Model Predictive Control, resonant controllers, adaptive control, PLL/synchronization algorithms, dq0-frame and stationary-frame control).

o Real-time embedded programming (C/C++, RTOS, bare-metal) and FPGA firmware (VHDL/Verilog).

o Model-based design and automatic code generation workflows.

· Strong background in power electronics modeling, renewable integration, microgrid systems, and grid compliance testing.

· Proven track record of leading technical deliverables from concept through to successful product deployment or field operation.

Position Summary

QA Engineer (Process Quality Control) is responsible to develop & deploy inspection procedures to ensure conformance of material to be released. Candidates with experience in semiconductor manufacturing environment are encouraged to apply for this position.

Key Responsibilities:

• Responsible for backend semiconductor packaging processes which ball drop, bumping, singulation, back grind and mounting.
• Effectively providing engineering support in order to meet production output, product quality, efficiency, productivity, yield, cycle time and safety requirements.
• Responsible to analyse the process data and identify improvement actions and work on the improvement.
• Drive permanent solutions to resolve chronic process and quality issues.
• Responsible to evaluate new product/material/process during the pilot run and ensure process readiness.
• Responsible for the relevance of the Work Instructions, Control Plan, FMEA & Process Control documents.
• Responsible to prepare the line for internal & external audits and the follow-up actions.
• Any other ad-hoc duties as assigned.

Requirements:

• Bachelor’s Degree in Engineering (Mechanical, Electrical, Materials, Chemical, or related field).
• Prior experience in semiconductor packaging processes (ball drop, bumping, singulation, back grind, mounting) would be advantageous.
• Experience in process engineering, yield improvement, and quality control.
• Proficiency in data analysis and statistical process control (SPC).
• Familiarity with Failure Mode and Effects Analysis (FMEA), Control Plan, and Process Control documentation.
• Hands-on experience with new product/material/process evaluations.
• Ability to work in a fast-paced manufacturing environment.

Information:

• Salary Range: $3000 - $4000 Basic + $70 Meal allowance
• Working Hours: Mon-Fri, 8am-5.30pm
• Company Transport: Jurong / Tampines

Responsibilities:

• Handling customer quality issues & continuous improvement activities of products & processes.
• Coordinate with quality related issues to follow-up on effective corrective/preventive actions.
• Perform activities such as process optimization, benchmarking through statistical tools/software.
• Handle external audit in accordance to Technical Specifications & ISO standards.

Requirements:

• Degree in Chemical/Chemistry/Materials Science/Mechanical Engineering
• Experience in servicing customers' quality related issues in semiconductor industry
• Knowledge of DOE & JMP and QC tools (FMEA, SPC and 8D format report writing)
• Familiar with IATF16949 requirement is a plus. Entry level are welcome to apply.
• Willing to work overtime when needed and travel overseas 2-3 time per month.

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang
EA Personnel No: R21102570
EA License No: 23C1894

• Ensure the consistent delivery of high-quality Printed Wiring Boards that meet customer specifications and industry standards by managing quality assurance processes and serving as the primary liaison for customer service accounts.
• Responsible for driving continuous improvement, resolving quality-related customer issues, and upholding compliance with regulatory and internal quality systems to enhance customer satisfaction and product reliability.

Customer Quality Liaison

• Act as the primary contact for customer quality-related inquiries and complaints
• Coordinate resolution of customer issues through root cause analysis and corrective actions

Quality Control Oversight

• Monitor inspection and testing procedures are followed
• Monitor product conformance to IPC and customer-specific standards

Documentation & Compliance

• Maintain quality records in accordance with ISO 9001 and internal QMS protocols
• Prepare and submit quality reports to customers and internal stakeholders

Process Improvement

• Identify recurring quality issues and lead initiatives to improve manufacturing pro
• Support implementation of Problem-Solving methodologies

Audit & Review

• Participate in internal and external audits
• Ensure readiness for customers and regulatory inspection

Training & Support

• Provide guidance to production teams on quality standards and procedures
• Assist in onboarding new staff with QA related training
• Support new product introduction (NPI) with quality input and validation

Requirements:

• Degree in any Engineering discipline (Quality Engineering preferred) in a manufacturing environment
• Min 2 years of experience in Quality Assurance activities/operational
• Good communication, report writing and presentation skills
• Good analytical skills with ability to work effectively
• Independent, decisive and good at problem solving
• Able to adapt in a fast-paced environment
• Preferred with knowledge of PWB manufacturing processes
• Proficiency in Microsoft Office

Electronics MFG Industry

Loyang Area

Interested candidates, please forward a detailed resume and via email to hr@tempserv.com.sg

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

Role Summary

This is a build-it role with a leading global operator of high-density compute and data centre infrastructure. You'll be a key technical voice in a Performance Assurance team responsible for keeping mission-critical sites running at peak reliability across our international portfolio. You'll travel across APAC and global locations (~50% of the time), see the equipment in real operating conditions, and turn what you measure into decisions that protect tens of millions of dollars of mission-critical assets.

If you've spent your career so far in a refinery, power plant, semiconductor fab, petrochemical facility, utility, or another high-stakes industrial environment — and you're ready to apply that mission-critical mindset to one of the most demanding compute infrastructures in the world — this is the role you've been training for, even if you didn't know it.

Responsibilities

• Own the power quality and asset reliability monitoring program for global data centre and critical power systems, supporting Tier III/IV-class availability
• Travel to sites to install, commission, and run long-term and ad-hoc monitoring using professional-grade analysers (Fluke, Dranetz, Hioki, PQube, Schneider ION, or equivalent) — capturing voltage, frequency, harmonics, three-phase imbalance, flicker, and voltage dip/swell data
• Turn raw data into operational decisions using Python, MATLAB, or advanced Excel — running 95th-percentile evaluations, exceedance analysis, event waveform reviews, and trend reports aligned with IEC 61000 and related international standards
• Hunt down disturbance sources — non-linear loads, UPS systems, energy storage PCS inverters — and propose mitigation (active/passive filters, reactive power compensation, design changes)
• Lead pre-connection power quality reviews for battery energy storage system (BESS) integration projects — on-site testing and verification of harmonics, fluctuations, and fault ride-through against IEC 61000, IEEE 519, and EN 50160
• Be the in-house technical authority on power quality and asset reliability — running internal training, briefing operations and project teams, and tracking how international standards are evolving

Requirements

• 5–10 years of hands-on engineering experience in mission-critical industrial environments
• Bachelor's degree in Electrical Engineering, Power Engineering, High Voltage, or related discipline.
• Solid grounding in HV/LV electrical systems — switchgear, transformers, UPS, generators, ATS, motors, VSDs, protection systems.
• Comfortable with — or willing to deepen — your hands-on use of professional power quality analysers (Fluke 435/1760/174 or equivalent). Even if your current role doesn't have you running them daily, you understand the measurement principles and want to grow this specialism
• Familiarity with IEC 61000-4-30, IEEE 519, EN 50160 or equivalent international PQ standards.
• Data-fluent. Python or MATLAB or advanced Excel skills
• Open to ~50% travel.
• Bonus points for any direct experience with BESS integration, harmonic mitigation projects, PCS inverter analysis, "PV + storage" optimisation, UPS/storage backup integration, or Tier III/IV data centre commissioning

How to apply

Ready to join this role?
Click Apply now to submit your resume and share your availability.
All information received will be kept strictly confidential and will be usedonly for employment-related purposes.

Trident Recruitment Pte. Ltd. | 25C2668
Samuel Tse | R1223789

Responsibilities

• Ensures all construction activities are completed prior to taking up the system for commissioning.
• Prepares and plans the deployment of workers to fulfill the commissioning schedule.
• Ensures the preparation of procedures and guidelines for systematic commissioning and start-up of equipment.
• Initiate and manage the commissioning by Coordinating between the company and OEM.
• Highlight operational issues with regards to machinery and equipment.
• Ensure that OEM meets the Contractual agreement accordingly.
• Audit work site regularly and ensure that proper housekeeping is adhered to.
• Supervise onsite commissioning activities
• Coordinate work with other Trades
• Prepare and maintain commission records of site observations, testing processes and checklist.
• Track and review progress through HAT meetings.
• Attend progress meeting to keep up status and close issues with customers.
• Ensures that all safety and precautionary requirements and procedures are followed during the commissioning process.
• Compile and update commissioning report/ records.
• Assist with Identification and set right commissioning and malfunction issues.
• Access the requirements of special tools and equipment required for commissioning and initiate procurement if required.
• Review the tools and equipment used for Safety and Efficiency.
• Develop and update RA accordingly and enforce on-site and conducted weekly safety briefing with supervisors and workers.

Requirements

• Degree or Diploma in Naval Architecture/Structural/Marine/Electrical/Electronic Engineering or other electrical/offshore/electronic related studies.
• Naval Institute Trained
• Shipboard or Preferably 3 years or more of working experiences in similar capacity.
• No experience can be considered for junior role.
• Knowledge of Class requirements & Quality Standard requirements
• Trade Dependent.
• Must be able to understand Marine/Electrical & Automation Systems Equipment related schematic & arrangement drawings
• Knowledge and skills in Marine/Electrical & Automation systems equipment's operational requirements.
• Adequate Computing Knowledge as well as use of Microsoft Office and e-mail.

Other Information

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm 

Job Title: Test Automation Engineer (1 year contract) (ID1748)
Location: Buona Vista
Working Hour: Mon to Fri, 9am-6pm
Basic Salary: $5000-$8000

Job Responsibilities:
• Develop and maintain automation frameworks using Tosca, Playwright (JavaScript/TypeScript), and API automation
• Design and execute automated tests for trading and post-trade systems
• Integrate automation into CI/CD pipelines (Jenkins, Azure DevOps, etc.)
• Perform end-to-end testing across capital markets workflows (order management, execution, settlement)
• Collaborate with cross-functional teams in Agile environments
• Ensure compliance with regulatory and operational standards

Position Overview

We are seeking an experienced Test Engineer with a strong background in software quality assurance and Agile delivery. The successful candidate will be responsible for designing, executing, and improving test strategies across the development lifecycle to ensure the delivery of high‑quality, reliable, and secure software products.

You will work closely with developers, product owners, and business stakeholders to test early, test often, and uphold quality at every stage of the Agile process.

Key Responsibilities

Quality Engineering & Test Design

• Design, develop, and execute test strategies, plans, and test cases to ensure software quality throughout the Agile development lifecycle.
• Design and execute test cases based on acceptance criteria, ensuring new features meet defined quality standards.

Testing & Automation

• Contribute to the automation of test cases and continuous testing processes using relevant tools and frameworks.
• Perform manual and automated testing across functional, integration, system, and UAT stages.

Defect Management

• Identify, document, prioritise, and track defects through resolution.
• Collaborate closely with developers to triage issues, verify fixes, and ensure timely closure.

Agile Collaboration

• Work alongside developers and product owners to test early and frequently within each sprint.
• Ensure quality is maintained consistently throughout the Agile lifecycle.
• Support UAT efforts through preparation of evidence, test artefacts, and functional validation.

Documentation & Reporting

• Ensure test results, logs, and evidence are properly documented and audit‑ready.
• Produce clear, comprehensive, and structured test plans, test cases, and bug reports.

Requirements

• Bachelor’s Degree in Computer Science, Information Systems, Engineering, or a related field.

Extensive professional experience with demonstrated expertise may be considered in lieu of formal qualifications.

• At least 5 years of experience in software quality assurance or testing roles within Agile teams.
• Proficient in manual and automated testing techniques, including unit, integration, system, and UAT testing.
• Experience with test automation frameworks and tools (e.g., Selenium, Cypress, JUnit, TestNG, or similar).
• Familiarity with Agile testing methodologies and continuous testing in CI/CD environments.
• Strong ability to collaborate with developers, business analysts, and users to ensure high‑quality deliverables.
• Highly proficient in writing detailed test plans, test cases, and bug reports with strong attention to detail.

What We Offer

• Opportunity to work on impactful public sector digital platforms.
• Team-first culture with collaborative Agile practices.
• Access to modern testing tools and cloud-based DevOps environments.
• Structured career progression and skills development support.

JOB DESCRIPTION

Department: Quality Assurance

Report to: Head of Supplier Quality Engineering Section

Functional Relationships with: Quality Assurance & Control Division

POSITION PROFILE:

Based in: Singapore

Job site: Tuas

The successful candidate will:

• Manage, monitor & assure good incoming part quality.

• Manage part quality issues, deploy effective corrective & preventive measures.

• Audit, qualify to introduce parts & vendors.

• Monitor & work with vendors to improve part quality.

KEY DUTIES & RESPONSIBILITIES:

• Ensure all parts are correctly verified & fit for use promptly. Drive, resolve supplier-related quality issues promptly and effectively to ensure continuous supply of good quality parts.

• Monitor & analyse part data & supplier’s performance to identify risks; develop plans to improve parts, suppliers to meet quality expectations.

• Train & enable technicians to function as effective detection and prevention gates of incoming materials to ensure good part quality.

• Audit, qualify, manage suppliers & parts. Map suppliers’ development plan with existing and potential suppliers.

• Audit, verify suppliers’ quality systems, controls and processes to ensure their conformance to the requirements and standard.

• Review, improve / refine the SQE workflows, jobs, process efficiency & productivity of SQE operations.

• Manage, enable safe and efficient inspection process & operating environment.

• Manage the SQE equipment to ensure their validity, fitness & correct functions.

• Manage a small team of technicians to conduct effective operations.

• Review, update & maintain SQE-related ISO documents periodically.

• Generate reports as necessary.

ABILITY/COMPETENCY REQUIRED:

• Degree in Engineering disciplines (mechanical, materials, chemical, quality or manufacturing).

• At least 3-5 years of relevant working experiences.

• Must be able to use Microsoft Office applications effectively.

• Experience in plastic injection and/or metal stamping will be excellent.

• Knowledge of using SolidWorks, JMP, Minitab will be good.

• Good communication and negotiation skills.

• Good analytical, logical and troubleshooting skills.

Job Responsibilities:

• Plan and implement the Abnormal Handling (ABS/PAR/IEAR/BPD) system, assisting the FAB reviewing process abnormalities establishing an early warning notification system, with the aim of reducing quality loss and cost for the company and customers, and supervising the effectiveness of system execution.

• Plan and implement the MRB (Material Review Board), assisting the FAB reviewing waived products resulting from process abnormalities, in order to reduce quality loss and cost for the company and customers, and supervising the effectiveness of the system.

• Plan and implement internal audits, assisting the FAB in identifying processes and systems with quality risks, and supervising the effectiveness of improvements to risk processes.

• Plan and implement the MSA (Measurement System Analysis) system, assisting the FAB in performing calibration and capability assessment of measuring instruments to ensure the reliability of measurement values and thus ensure product quality.

• Implement the automotive service package, assisting the FAB in planning executable methods and systems, and auditing and supervising the execution process for automotive products.

Job Requirements:

• Minimum Bachelor degree in engineering (ex. Electronics, Material science, Chemistry, Physics, Statistics, Data Science, Math)

• Candidates with more than 3 years of semiconductor process/quality/integration experience will be considered for a senior role

• Knowledge of problem solving (8D methodology), statistical techniques, Measurement System Analysis(MSA) and planning/project management is an advantage

• Knowledge of ISO9001/ISO/TS16949 or VDA6.3 standards, Lead Auditor qualification and audit handling/experience is preferred

• Collaborate with cross-functional teams to resolve quality issues and customer requirements to drive product quality improvements

• Good communication and negotiation skills, with the ability to collaborate with FAB module, PEI and Customers

Whether you’re looking for your first role or your next career move, UMC is where your future can take shape.

Step into your future with us. Apply Now.

About United Microelectronics Corporation

United Microelectronics Corporation (UMC) is a leading global semiconductor foundry with over 40 years of innovation powering technologies across AI, automotive, consumer electronics, connectivity, and IoT. As one of the industry’s most established players, we enable breakthrough technologies through precision-engineered semiconductor manufacturing for customers across every major sector of the electronics world.

Headquartered in Taiwan, UMC has been present in Singapore since 2004 and continues to invest in local talent, technology, and advanced manufacturing. Our recent Fab expansion reflects our long-term commitment to building Singapore as a key hub for semiconductor innovation, and to creating stable, meaningful careers through innovation, teamwork, and progress.

Join a team that invests in your future from day one. With best-in-class training, hands-on experience and access to cutting-edge tools, UMC equips you to lead tomorrow’s tech landscape, right down to the nanometre.

Company Overview

TESSOLVE ENGINEERING SERVICES PTE. LTD. is a technologycompany specializing in engineering services with expertise in semiconductortesting and product engineering solutions.

Job Summary

As a Senior Test Engineer, you will develop and debug testprograms for Digital, PMIC, RF, and Mixed Signal products on ATE platforms,collaborating with cross-functional teams to ensure successful productcharacterization, yield improvement, and production release.

Responsibilities

• Develop test programs for Digital, PMIC, RF, and Mixed Signal products on ATE platforms such as Advantest 93k (SmarTest 7, 8) and Teradyne UFLEX
• Collaborate with design engineers to debug first silicon, characterize devices, and bring up test programs from NPI to volume ramp stages
• Debug digital vectors including JTAG, SCAN, ATPG, Functional, and Mbist to support device characterization across process, voltage, and temperature variations
• Characterize Mixed Signal IP components such as ADC, DAC, and PLL to ensure product performance and reliability
• Lead test program handoff, production release, yield improvement, and test time reduction initiatives
• Engage with Product Engineering, Design Engineering, Quality Engineering, and Foundry Engineering teams to drive cross-functional alignment and problem resolution

Preferred competencies and qualifications

• Diploma or Degree in Electronics, Electrical, or Communication Engineering
• 5 to 8 years of experience with ATE platforms including Advantest 93k or Teradyne UFLEX/IFLEX, developing SOC test programs from NPI to volume ramp
• Proficiency in statistical analysis software and quality/reliability testing methodologies
• Strong programming skills in languages such as Java, C/C++, Visual Basic, Perl, and Python for test code development and debugging
• Solid understanding of analog and digital electronics principles
• Strong analytical and problem-solving skills demonstrated through hands-on lab work
• Excellent verbal and written communication skills with the ability to work independently

1) Experience that will demonstrate proficiency and ease with one or more programming languages, quality assurance, scripting languages and operating systems.

2) Solid hands-on development experience in backend technologies including JAVA, J2EE, SQL and related technology stack, preferably incorporating open source libraries.

3) Hands-on experience to Spring Framework, Spring Boot, MongoDB and JPA / Hibernate is a strong plus.

4) Exposure to frameworks like Karate and TestNG is good to have to carry out QA tasks. Some knowledge of test automation frameworks is also a strong plus.

5) Strong foundation expected in data structures, algorithms, problem solving and complexity analysis. 6) Strong designing, analytical, programming & communication skills needed, along with aptitude for building stable solutions.

7) Knowledge about writing unit test cases using frameworks like JUnit / TestNG is desired.

8) Some demonstrated experience with n-tier web application development and experience in latest JDK is desired. Java / J2EE certification is a Plus. Experience with web services standards and related technologies (XML, JSON, REST, SOAP, WS*, AXIS, JERSEY) is nice to have.

9) Demonstrable experience utilizing object-oriented patterns and design best practices is a strong plus.

10) Exposure to tools like Postman / any REST Client is desired. LINUX skills are required.

11) Exposure to frameworks like Karate and TestNG is good to have to carry out QA tasks. Some knowledge of test automation frameworks is also a strong plus.

12) Working knowledge of Continuous Integration / Delivery, and Test Driven Development is good to have.

13) Knowledge in micro services and hands-on experience on container platforms like Kubernetes, Docker and OpenShift would be a strong plus.

14) Hands on experience in distributed architecture & data streaming approaches like Kafka and RabbitMQ is a strong plus.

Company Overview

TESSOLVE ENGINEERING SERVICES PTE. LTD.

Job Summary

Drive test characterization and platform enablement for PMIC, Mixed Signal, and RF IPs. Collaborate with engineering teams to debug, analyze data, and deliver detailed reports supporting product quality and performance.

Responsibilities

• Develop and execute test codes for automated measurements using lab equipment to enable efficient test platform operation
• Characterize PMIC, Mixed Signal, and RF IPs by measuring Buck/LDO regulator parameters including line/load regulation, efficiency, accuracy, RDSON, load/line transient, and PSRR
• Operate and maintain bench equipment such as source meters, oscilloscopes, spectrum analyzers, logic analyzers, power supplies, and function generators for design debug and circuit deep dives
• Perform lab characterization of Mixed Signal or RF IP and Baseband Modem Functional Blocks including ADC, DAC, and PLL to validate design functionality
• Collaborate closely with test engineering and production support teams to drive debug activities and correlate data with Automated Test Equipment (ATE) results
• Generate test limits (guard bands), provide detailed status updates at each phase, and compile comprehensive summary reports
• Analyze test data using statistical tools and software to identify trends and support decision-making

Required competencies and certifications

• Degree in Electronics or Electrical Engineering
• 2 to 6 years of experience in characterizing mixed signal IP and RF components
• Solid understanding of RF and Mixed Signal test concepts and measurement techniques
• Hands-on experience with lab equipment such as spectrum analyzers, digitizers, and high-speed serial data analyzers
• Proficiency in Embedded C/C++, LabVIEW, and FPGA development
• Strong data analysis skills with experience in statistical analysis software such as JMP, CEDA, DataPower, or OptimalPlus
• Effective verbal and written communication skills with the ability to work independently

Preferred competencies and qualifications

• Knowledge of scripting languages such as Perl, Python, or VBA for automation in reporting

Company Overview

TESSOLVE ENGINEERING SERVICES PTE. LTD.

Job Summary

Drive test characterization and platform enablement for PMIC, MixedSignal, and RF IPs. Collaborate with engineering teams to debug, analyze data,and deliver detailed reports supporting product quality and performance.

Responsibilities

·      Develop and execute test codes for automated measurements using labequipment to enable efficient test platform operation

·      Characterize PMIC, Mixed Signal, and RF IPs by measuring Buck/LDOregulator parameters including line/load regulation, efficiency, accuracy,RDSON, load/line transient, and PSRR

·      Operate and maintain bench equipment such as source meters,oscilloscopes, spectrum analyzers, logic analyzers, power supplies, andfunction generators for design debug and circuit deep dives

·      Perform lab characterization of Mixed Signal or RF IP and Baseband ModemFunctional Blocks including ADC, DAC, and PLL to validate design functionality

·      Collaborate closely with test engineering and production support teamsto drive debug activities and correlate data with Automated Test Equipment(ATE) results

·      Generate test limits (guard bands), provide detailed status updates ateach phase, and compile comprehensive summary reports

·      Analyze test data using statistical tools and software to identifytrends and support decision-making

Required competencies and certifications

·      Degree in Electronics or Electrical Engineering

·      2 to 6 years of experience in characterizing mixed signal IP and RFcomponents

·      Solid understanding of RF and Mixed Signal test concepts and measurementtechniques

·      Hands-on experience with lab equipment such as spectrum analyzers,digitizers, and high-speed serial data analyzers

·      Proficiency in Embedded C/C++, LabVIEW, and FPGA development

·      Strong data analysis skills with experience in statistical analysissoftware such as JMP, CEDA, DataPower, or OptimalPlus

·      Effective verbal and written communication skills with the ability towork independently

Preferred competencies and qualifications

·      Knowledge of scripting languages such as Perl, Python, or VBA forautomation in reporting

Are you our next creator of change?

Are you looking for a career in an inspiring, global environment where your expertise makes a difference? At Neste, you will be working for the world’s leading producer of renewable diesel and sustainable aviation fuel. Together we can help our customers to reduce their greenhouse gas emissions.

We are looking for you,

Process Control Engineer
to join our Technical Department, Process Control Engineering Team in Neste Tuas Singapore.

As the owner of the refinery process control systems, you will focus on ensuring operational availability, productivity, flexibility & safety through continuous process control improvement initiatives, process control optimization & troubleshooting where required.

In this job, you will also work closely with Operations, Maintenance, Safety and Other Engineering functions to strive for Operational Excellence through process improvement initiatives & projects. 

Together with you as the process control subject matter expert (SME) in the Singapore renewable diesel & sustainable aviation fuel (SAF) production refinery, we can make an impact today through meaningful work that drives Neste forward.

Reasons to join
We operate in an inspiring and evolving business environment as a global leader in renewable fuels. We contribute to Neste’s success by living our values every day: we care, we have courage, we cooperate.

We always prioritize safety and in every location. We strive to create a positive and impactful work environment.

Transformation brings new possibilities and fosters our courage and curiosity. As a global company, we support personal development with versatile learning and career opportunities. Collaboration is key, and we believe in flexible, smart ways of working.

More about the job

Your role in our team

• As the owner of the process control systems in the Pre-Treatment Units, Heat Treatment Unit & Tank farm, you will develop & improve refinery processes by following up, developing & executing modifications / improvements to the Distributed Control System (DCS), Safety Instrumented System (SIS) & other automation system applications
• Troubleshoot process deviations and lead major non-conformance investigations to resolve problems related to process control applications or safety interlock systems.
• Develop and drive alarm management workflow related to your area of responsibility.
• Develop and drive management of change (MOC) as change manager for PCS & SIS modifications
• Lead or support capital investment projects involving changes to the DCS, SIS or other automation system applications.
• Ensure process safety through functional safety / periodic proof tests, standards and specifications development and risk evaluation processes (Process Hazard Analysis, HAZOP, LOPA, SIL etc…)
• Process control systems related competence development at Singapore refinery in your area of responsibility.
• Develop and maintain documentation and specifications related to process/plant control and automation logics.
• Utilizes process monitoring & optimization management tools to optimize plant performance
• Sharing and implementation of best practices and common initiatives from Rotterdam and Porvoo refineries.
• Participate as proof test leads to execute SIS proof testing during unit turnarounds

Keys to success in this role / The best combination to succeed in this role

• B Sc. or higher degree in chemical engineering or relevant field and understanding of Renewable products chemical processing unit operations and engineering.

• At least 6 years of work experience in process control engineering and operations in the oil and gas, refining or petrochemical industry
• Strong knowledge in Instrumentation and control design engineering management, engineering drawing interpretation ability
• Process Control engineering application / operating skillsets on Emerson DCS and SIS is considered an advantage
• Process Control experience on refining pre-treatment units, heat treatment units and/or tank farm operations is considered an advantage
• Good understanding on functional safety lifecycle management (design, operations & maintenance) is considered an advantage

• Responsible attitude and safety-oriented mindset
• Strong problem solving, communication and computational thinking skills
• Strong Interpersonal and planning skills
• Good ability to influence in both local and global matrix organization with cultural awareness, performance driven and active networking attitude

Let’s get you started

We look forward to receiving your CV and application (with a salary request).

Due to security and confidentiality, please submit your application through our recruitment system. Applications sent via email will not be considered.

We will do our best to contact you within 2 weeks after the application time has ended. The recruitment process will include interviews and a possible aptitude assessment. (The person selected for the position must pass a health examination including a drug test. A security clearance is obtained with your consent.)

Neste in brief
Neste (NESTE, Nasdaq Helsinki) creates solutions for mitigating climate change and accelerating a shift to a circular economy. The company is the world’s leading producer of sustainable aviation fuel (SAF) and renewable diesel, enabling its customers to reduce their greenhouse gas emissions. Neste refines waste, residues and other renewable raw materials to high-quality renewable fuels at its refineries located on three continents. The company’s annual renewable fuels production capacity will be increased to 6.8 million tons in 2027.

Neste has high standards for sustainability and the company has consistently been recognized by several leading sustainability indices. In 2024, Neste's revenue stood at EUR 20.6 billion. Read more: neste.com

Responsibilities:

• Maintain accurate and up-to-date ISO 9001, ISO 14001, and ISO 13485 documentation, including Quality Manuals, procedures, work instructions, and records, to ensure system compliance and management review readiness.
• Plan, coordinate, and conduct internal and external audits to ensure organizational readiness for third-party certification, management reviews, and customer audits.
• Collaborate with internal stakeholders to support and participate in customer and supplier audits to ensure compliance requirements are met.
• Review audit findings, develop corrective action plans, and drive continuous improvement initiatives.
• Generate and review supplier quality performance reports, work closely with suppliers to resolve non-conformances, and promote continuous improvement.
• Issue, monitor, and follow up on Supplier Corrective Action Requests (SCAR), ensuring effectiveness and timely closure.
• Support qualification and onboarding of new suppliers to maintain a robust pipeline aligned with production requirements.
• Manage calibration schedules and preventive maintenance programs for equipment to ensure operational reliability and compliance.
• Address quality issues arising from production and customer feedback by working closely with production teams to implement corrective actions and resolve customer complaints with proper documentation.
• Ensure timely closure of Corrective and Preventive Actions (CAPA), non-conformance reports, and customer complaints, and publish quality performance reports.
• Lead Material Review Board (MRB) meetings with cross-functional teams to perform root cause analysis, implement corrective actions, and verify effectiveness.
• Supervise and lead QC inspectors to ensure parts inspection compliance with engineering drawings and quality standards.

Qualifications:

• Diploma in Quality Management, Engineering, Manufacturing, or a related field.
• Min 3 years of relevant experience in quality or manufacturing environments, with exposure to audits and documentation.
• Basic understanding of supplier management and quality coordination.
• Familiarity with commonly used quality management standards (e.g. ISO systems).
• Working knowledge of quality tools and process control methods.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Job Description:

• Develop and execute automated test scripts using Playwright.
• Design and maintain scalable automation frameworks and ensure high test coverage.
• Perform SIT and UAT automation aligned with business requirements.
• Collaborate with developers, product owners, and stakeholders to understand user stories.
• Participate in Agile ceremonies and contribute to test strategy.
• Ensure stability, reliability, and continuous improvement of automation suites.

Requirements:

• 3+ years in software testing with strong automation experience.
• Hands-on expertise in Playwright (TypeScript).
• Experience with Salesforce testing (preferred).
• Good understanding of Agile/Scrum.
• Strong skills in requirement analysis and stakeholder communication.
• Experience with CI/CD integration is a plus.

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development services providing customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and products through intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutions comprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com

RESPONSIBILITIES

• Support HW NPI SQPM (Solution Qualification Project Manager) in managing ad-hoc hardware validations
• Assist in validation planning and coordination, including scope confirmation, test readiness checks, and schedule tracking
• Oversee day-to-day validation execution progress, working with internal engineering teams and external test labs/vendors
• Track validation issues, risks, and action items, and support follow-up closure
• Consolidate test data and results, and prepare validation status reports and final reports for SQPM review
• Maintain frequent communication with program SQPMs to ensure alignment on validation progress and priorities
• Support one primary program initially, with potential ramp-up to multiple NPI programs

• Diploma/Bachelor's Degree in Engineering or equivalent
• At least 2 years of experience in hardware NPI, system validation, reliability, quality, or related engineering roles
• Hands-on experience or exposure to hardware or software validation and testing activities
• Experience coordinating tests and tracking execution progress
• Familiar with test and issue tracking tools such as TestRail and Jira
• Strong communication and documentation skills
• Able to work independently with guidance from program SQPMs
• Comfortable working in a fast-paced, program-driven environment
• Experience supporting multiple programs in parallel
• Prior experience working with external test labs or validation vendors

Beyondsoft committed to being an equal opportunity employer and provides equal employment opportunities to all employees and applicants. We strive to cultivate a workplace that celebrates diversity and inclusion, where individuals of all backgrounds—regardless of nationality, ethnicity, religion, age, gender identity, sexual orientation, or any other distinguishing trait—can succeed and thrive. We prohibit discrimination and harassment of any type with regard to race, color, religion, age, national origin, disability status, genetics, sexual orientation, gender identity, or expression. This policy applies to all terms and conditions of employment, including recruiting, hiring, and the entire employee lifecycle. We are focused on creating an environment where everyone can reach their full potentetl

Employment offers from Beyondsoft are contingent upon the successful completion of any required pre-employment processes, in line with applicable laws and regulations. Beyondsoft does not ask for any recruitment fees, nor does it request any unauthorized payments from candidates as part of the hiring process.

Position: QA Engineer (Chemical Industry) (Job ID: 20173)

• Tuas West

• Basic + AWS + VB
  

Job Description:

• Oversee incoming quality inspections and analyse supplier performance, identifying trends and driving quality improvements

• Monitor product quality from incoming to outgoing stages using SPC and ensure compliance with customer requirements

• Manage and maintain QA documentation in compliance with ISO standards and internal quality systems

• Collaborate and coordinate with cross-functional teams/departments to address interdepartmental quality-related issues

• Ensure accuracy and integrity of QA data and records in accordance with established procedures

• Investigate and resolve quality issues, including root cause analysis and implementation of corrective actions

• Support customer enquiries by preparing and coordinating quality-related documentation

• Prepare and review quality documentation (e.g., COA, reports) in accordance with approved procedures and customer requirements

• Participate in customer complaint investigations, ensuring timely resolution and proper documentation

• Coordinate evaluation/ad-hoc samples sampling activities and analyse data to support quality decisions and reporting

• Plan and participate in internal and external audits, ensuring audit readiness and compliance

• Conduct risk assessments/FMEA/training and support continuous improvement initiatives

• Promote and participate in quality/EHS related programs conducted by the company

• Additional responsibilities may be assigned based on business needs
  

Job Requirements:

• Diploma/Degree in Chemical or science discipline.

• At least 2 years (for Degree) / 5 years (for Diploma) of relevant working experience

• Good working knowledge of quality control standards and statistical analysis skills

• Ability to communicate clearly in both writing and verbally and good interpersonal and presentation skills

• Strong understanding of ISO9001, ISO14001 and ISO45001 standards will be an advantage

• Proficient in Microsoft Office Tools
  

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above. Please find the link below on MOM regulations:

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

Thank you for your cooperation.

Tan Katrina Therese Yap

EA Registration No: R25128964
Pasona Singapore Pte Ltd
1 FINLAYSON GREEN ＃09-02 SINGAPORE 049246
URL: www.pasona.com.sg

EA License No:90C4069

• Well Established Company

• Aerospace Industry

• Salary: $3000 to $5000 + Variable Bonus

• Working location: Seletar

• Working hours: Mon-Fri, 8.30am - 6pm

Job Responsibilities:

• Oversee QA standards and monitoring processes for MRO activities

• Drive continuous improvement and identify maintenance/workshop issues

• Support and maintain Safety Management System (SMS) implementation

• Facilitate hazard identification and risk management

• Track and ensure completion of risk mitigation actions

• Report on company safety performance and recommend training

• Support regulatory and third-party audits

• Conduct supplier evaluation and assessment

• Manage non-conformance processes (internal & external)

• Oversee staff training, approvals, and competency needs

• Lead process improvements and business excellence initiatives

• Maintain audit records and track corrective actions

• Perform root cause and corrective action (RCCA) analysis

• Develop and review MRO procedures

• Monitor equipment calibration and reports

• Assist QA Manager in all QA/QC activities
  

Requirements:

• Degree/Diploma in Mechanical, Manufacturing, or Production Engineering.

• 3 years of experience in Aerospace Quality and Auditing, with a minimum of 3 years as a QMS Auditor or Lead Auditor.

• Familiar with AS9100 and EASA/FAA/CAAS/CAAC Part 145.

• NADCAP Special Process Auditing experience (e.g. Non-Destructive Testing, Chemical Processing, Welding) is advantageous.​

• CAAS Air Legislation Paper
  

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experience and job responsibilities

• Current and expected salary

• Reason for leaving

• Date of availability

• Education background

We regret that only shortlisted candidates will be contacted.

Barry Ang Ze Xin (Reg No : R26159529)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

Responsibilities

• Review client technical documents, specifications, and project requirements
• Define ICA engineering scope and requirements for assigned projects
• Prepare and evaluate technical documents for instrumentation and control system procurement
• Provide senior technical support to project teams during engineering, construction, and commissioning phases
• Optimize ICA system designs for cost, reliability, maintainability, and compliance
• Prepare and review specifications for instrumentation, DCS, PLC, SCADA, ESD, and Fire & Gas systems
• Develop and review control philosophies and functional analyses (Control, ESD, F&G)
• Implement and verify instrumentation detail design on P&IDs
• Prepare and review instrument data sheets, loop diagrams, and hook‑up drawings
• Oversee detailed engineering activities including layouts, cabling, routing, and supports
• Plan, conduct, and witness FAT, SAT, and testing & commissioning activities
• Design, develop, and implement PLC and SCADA systems
• Coordinate with multidisciplinary teams and support junior engineers
• Perform other duties as assigned by Management

Requirements

Qualifications

• Bachelor’s Degree in Instrumentation, Control, Automation Engineering, or related discipline

Experience

• Minimum 5 years’ relevant experience in ICA engineering within energy, utilities, or infrastructure projects
• Experience in power, water/wastewater, or renewable energy projects is preferred

Technical Skills

• Strong experience with DCS, PLC, SCADA, ESD, and Fire & Gas systems
• Proficient in P&IDs, loop diagrams, instrumentation specifications, and control system architecture
• Knowledge of local standards, service providers, and solutions related to water and wastewater treatment
• Hands‑on experience with FAT, site testing, and commissioning

Soft Skills

• Strong analytical and problem‑solving skills
• Good communication and stakeholder management abilities
• Able to work independently and lead within project teams
• Strong focus on quality, safety, and compliance

Responsibilities

• Develop and execute automated test scripts using Playwright

• Design and maintain scalable automation frameworks and ensure high test coverage

• Perform SIT and UAT automation aligned with business requirements

• Collaborate with developers, product owners, and stakeholders to understand user stories

• Participate in Agile ceremonies and contribute to test strategy

• Ensure stability, reliability, and continuous improvement of automation suites

Requirements

• Degree / Diploma holder in Computer Engineering or related discipline

• 3+ years in software testing with strong automation experience

• Hands-on expertise in Playwright (TypeScript)

• Experience with Salesforce testing (preferred)

• Good understanding of Agile/Scrum

• Strong skills in requirement analysis and stakeholder communication

• Experience with CI/CD integration is a plus

Licence no: 12C6060

Test Engineer

We are seeking an experienced Test Engineer with a strong background in software quality assurance and Agile delivery. The successful candidate will be responsible for designing, executing, and continuously improving test strategies across the development life cycle to ensure the delivery of high-quality, reliable, and secure software products.

Key Responsibilities

Quality Engineering& Test Design

• Design, develop, and execute comprehensive test strategies, plans, and test cases across the Agile development life cycle.
• Create and execute test cases based on acceptance criteria to ensure features meet defined quality standards.

Testing &Automation

• Develop and maintain automated test scripts using relevant tools and frameworks.
• Perform both manual and automated testing across functional, integration, system, and UAT phases.
• Contribute to continuous testing practices within CI/CD pipelines.

Defect Management

• Identify, document, prioritise, and track defects through to resolution.
• Collaborate closely with developers to triage issues, validate fixes, and ensure timely closure.

Agile Collaboration

• Partner with developers and product owners to integrate testing early within each sprint.
• Ensure consistent quality throughout the Agile life ycle.
• Support UAT by preparing test evidence, artefacts, and performing functional validation.

Documentation &Reporting

• Maintain clear, structured, and audit-ready test documentation, including test plans, cases, and execution logs.
• Produce detailed and concise defect reports with strong attention to detail.

Job Requirements

• Bachelor’s Degree in Computer Science, Information Systems, Engineering, or a related field.
• Minimum 5 years of experience in software testing or quality assurance within Agile environments.
• Strong proficiency in both manual and automated testing, including unit, integration, system, and UAT testing.
• Hands-on experience with automation tools/frameworks such as Selenium, Cypress, JUnit, TestNG, or similar.
• Familiarity with Agile methodologies and CI/CD pipelines.
• Excellent collaboration skills with developers, business analysts, and stakeholders.
• Strong documentation skills with high attention to detail in test artefacts and defect reporting.

(EA Reg No:20C0312)

Please email a copy of your detailed resume to abegail@talentsis.com.sg for immediate processing.

Only shortlisted candidates will be notified.

Job Summary

You will be deployed to our client who is a leading government technology agency driving digital transformation and innovation in the healthcare sector. You'll be part of the test engineering services team, providing end-to-end performance testing. You will also be expected to support multiple projects within the organisation.
Responsibilities

• Analyzing documents (e.g., design, requirements, architecture, diagrams, flowcharts) to obtain an understanding of the requirements
• Identifying the required test scenarios, test case preparation, test data preparation and document traceability matrix to ensure sufficient test coverage
• Execute test cases and test plans to support the quality assurance activities throughout the software lifecycle
• Write and prepare technical performance test plan
• Run test cases, analyze the result and with solid debugging skills
• Communicate to leads on the issues that are reported and its impact to schedule, budget or quality of the product
• Work closely with Software Quality Engineer/Manager to understand the Performance Testing requirements
• Evaluate application architectures and design performance test plans
• Establish performance test objectives, acceptance criteria, workload profiles and use case scenarios
• Measure and analyze performance data (workload, system and application)
• Solve complex problems and provide clear and concise reports with recommendations

Requirements

• Must have at least 8 years of hands-on experience in end-to-end performance testing lifecycle and methodology
• Experienced in C programming, Core Java or .Net
• In-depth knowledge and experience working with Micro focus LoadRunner enterprise and LoadRunner Cloud
• Experience in mobile performance testing in Android and iOS devices
• Good understanding in Mobile automation and how to use ADB command and Xcode project structure/simulators
• Experience in defining test metrics, conducting analysis and result reporting
• Experience in using performance monitors like Dynatrace, Cloudwatch, Prometheus and APM
• Experience in test automation tools like Katalon or Selenium is advantage
• Excellent communication (spoken and written) skills and be able to work independently

If you are interested in this role and would like to discuss the opportunity further please click apply now or email Chew Kai-Xinn at kaixinnchew@morganmckinley.com for more information.

Only shortlisted candidates will be responded to, therefore if you do not receive a reply within 14 days please accept this as notification that you have not been shortlisted.

Morgan McKinley Talent Solutions

Morgan McKinley Pte Ltd EA Licence No: 11C5502

EAP Registration No: R2196712

EAP Name: Chew Kai-Xinn

Main Responsibilities

• Assist in PLC programming, simulation, and troubleshooting.
• Work with field devices, sensors, and VSDs for control and monitoring.
• Support SCADA/HMI graphics development and testing.
• Perform panel wiring checks, loop tests, and commissioning at site.
• Prepare I/O lists, test reports, and system documentation.
• Coordinate with team members and clients for project execution.

Requirements

• Diploma / Degree in Electrical, Electronics, Instrumentation, or Mechatronics Engineering.
• 3–5 years of experience or internship in PLC/SCADA work.
• Basic knowledge of any one PLC platform: Siemens, AB, Schneider, or Mitsubishi.
• Familiar with communication protocols: Modbus, Profinet, or BACnet.
• Willing to travel and work on-site when required.

Added Advantage

• Experience with AutoCAD, WinCC / EBO / GX Works / TIA Portal.
• Understanding of control wiring and sensor connections.
• Basic understanding of networking and cybersecurity in automation.

What We Offer

• Hands-on exposure to real automation projects.
• Learning and mentorship from senior engineers.
• Growth opportunities in PLC, SCADA, and Building Automation.