Total 918 Quality Assurance / Control job vacancies

Roles & Responsibilities

• Perform environmental control/enforcement support to the team.
• Identify any foreseeable risk of pollution arising from the workplace or work processes.
• Propose practical action to eliminate any foreseeable ill-health, prevention of pollution at workplace.
• Any other ad hoc duties required or assigned by Management that are relevant to the project.

Requirements

• Registered ECO (NEA)
• At least 2 years of relevant working experience
• knowledge of all relevant environmental policies, legislations, and guidelines, independent, with strong discipline and accountability.

Responsibilities:

• Conduct sampling and perform routine/non-routine microbial & chemical analyses such as purified water, raw materials, bulk products, finished products, and stability samples in accordance with approved procedures.
• Prepare laboratory reagents, microbiological culture media, media agar plates, sterilization of apparatus, and decontamination of microbiological waste.
• Carry out environmental monitoring activities (viable and non-viable airborne particulate contamination monitoring and microbial swab test).
• Assist in Microbial Limit Test (MLT), Antimicrobial Efficacy Testing (AET), Growth Promotion Test (GPT), Gram staining, microscopy, and microbe identification testing in accordance with established international standards.
• Assist in purified water system performance verification, production cleaning, sanitization validation, new product introduction, and continuous improvement initiatives.
• Document all results in accordance with Good Manufacturing Practices (GMP) and Good Laboratory Practices (GLP) requirements.
• Participate in out-of-specification and deviation investigations and recommend corrective actions.
• Maintains a high level of good housekeeping including ensuring all glassware, apparatus, and testing equipment are cleaned promptly once the analysis is complete.
• Participate in internal assessment and audit as required.
• Any other duties and responsibilities as assigned by the supervisor.

Requirements:

• Diploma in Microbiology, Biochemistry, or related discipline.
• Minimum 2 years of experience in cosmetics, food, nutritional personal care, medical devices, or pharmaceutical quality control laboratory.
• Knowledge of Good Manufacturing Practices or Good Laboratory Practices.
• Candidates with exposure to Halal, ISO 17025, or ISO 22716 will be an added advantage.
• Fluent in both oral and written English.
• Good communication and interpersonal skills.
• Systematic and able to work under pressure.
• Mature, proactive, attention to detail, well organized, analytical thinking, and quality minded.
• Meticulous and able to follow through with tasks promptly.
• Able to work independently as well as in a team.

Responsibilities:

• Maintain accurate and up-to-date ISO 9001, ISO 14001, and ISO 13485 documentation, including Quality Manuals, procedures, work instructions, and records, to ensure system compliance and management review readiness.
• Plan, coordinate, and conduct internal and external audits to ensure organizational readiness for third-party certification, management reviews, and customer audits.
• Collaborate with internal stakeholders to support and participate in customer and supplier audits to ensure compliance requirements are met.
• Review audit findings, develop corrective action plans, and drive continuous improvement initiatives.
• Generate and review supplier quality performance reports, work closely with suppliers to resolve non-conformances, and promote continuous improvement.
• Issue, monitor, and follow up on Supplier Corrective Action Requests (SCAR), ensuring effectiveness and timely closure.
• Support qualification and onboarding of new suppliers to maintain a robust pipeline aligned with production requirements.
• Manage calibration schedules and preventive maintenance programs for equipment to ensure operational reliability and compliance.
• Address quality issues arising from production and customer feedback by working closely with production teams to implement corrective actions and resolve customer complaints with proper documentation.
• Ensure timely closure of Corrective and Preventive Actions (CAPA), non-conformance reports, and customer complaints, and publish quality performance reports.
• Lead Material Review Board (MRB) meetings with cross-functional teams to perform root cause analysis, implement corrective actions, and verify effectiveness.
• Supervise and lead QC inspectors to ensure parts inspection compliance with engineering drawings and quality standards.

Qualifications:

• Diploma in Quality Management, Engineering, Manufacturing, or a related field.
• Min 3 years of relevant experience in quality or manufacturing environments, with exposure to audits and documentation.
• Basic understanding of supplier management and quality coordination.
• Familiarity with commonly used quality management standards (e.g. ISO systems).
• Working knowledge of quality tools and process control methods.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Responsibilities

• Responsible for establishing and enforcing the Quality Management System (QMS) which defines the rules, procedures, and documentation required to achieve consistent quality across all shipbuilding and repair operations.
• To ensure all projects meet the highest quality standards, customer specifications, and mandatory regulatory requirements from classification societies and authorities.
• To lead the Quality Control team to inspect and verify that every stage of the vessel’s construction, particularly critical areas like welding, fabrication, and coasting, strictly adheres to engineering specifications and technical drawings.
• Must ensure the vessel meets all mandatory safety and structural standards set by Classification Societies and international maritime regulations, facilitating all necessary audits and managing the resolution of quality issues.

Requirements

• Min 5 years relevant working experience in shipyard
• Bachelor's degree or Diploma in Naval architect or marine engineering
• Proficiency in AutoCAD
• Understand basic shipbuilding and project processes. Able to comprehend the technical specification and discuss projects with trades and customers.

To find out more out this opportunity, please contact Lionel Liew at lionel.liew@gmprecruit.com.

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd   |   EA Licence: 11C3793 |   EA Personnel: Lionel Liew   |   Registration No: R1330693

“By submitting your application for this position, you consent to the collection, use, and disclosure of your personal data by GMP Recruitment Services (S) Pte Ltd and its recruitment partners, including Employment and Employability Institute Pte Ltd, for the purpose of i) employment facilitation and ii) data and statistical analysis. You may find out more information on the PDPA policies at GMP Recruitment Services (S) Pte Ltd’s website and [https://www.e2i.com.sg/pdpa/].”

Role Overview

We are supporting a large enterprise in search for a quality assurance engineer to drive system quality, reliability, and performance across a large-scale technology transformation programme.

You will play a key role in ensuring quality across both legacy systems (Java, Sybase) and a modern cloud-native architecture on Microsoft Azure (.NET, Azure SQL). This role goes beyond traditional testing—you will contribute to automation, CI/CD integration, and platform stability.

Key Responsibilities:

•⁠  ⁠You will design and execute test strategies across the SDLC and support System Integration Testing (SIT) and UAT to ⁠ensure test coverage, traceability, and quality metrics

•⁠  ⁠Developing and maintaining automated and manual test cases, performing functional, regression, and exploratory testing as well as managing defects, test artefacts, and quality reporting will be key

•⁠  ⁠In addition to collaborating with stakeholders to define clear acceptance criteria, you will also need to build and enhance test automation frameworks, integrate testing into CI/CD pipelines and monitor application performance, reliability, and stability

•⁠  ⁠Other regular activities also include supporting environment setup, troubleshooting, and maintenance, contributing to continuous improvement of QA practices and maintaining test documentation and reporting

Required Skills & Experience

•⁠  ⁠Alongside your strong experience in software testing/quality engineering, you would come with a minimum of 6 years hands-on experience with test automation tools and frameworks

•⁠  ⁠Good understanding of CI/CD and Agile practices, cloud platforms (preferably Microsoft Azure) as well as performance testing, security testing and system integration testing are crucial to the success of this role

•⁠  ⁠Some basic knowledge of infrastructure or platform operations is also vital 

•⁠  ⁠You should be familiar with containerisation (Docker/Kubernetes) and IaC tools (Terraform, etc.)

•⁠  ⁠Any experiences in cloud migration / modernization projects, DevOps practices, Java or .NET environments will be highly regarded. 

What’s in it for you?

This is a high impact role where you will influence system reliability and performance, get to be part of a large-scale cloud transformation and work on modern engineering practices

• Ensure the consistent delivery of high-quality Printed Wiring Boards that meet customer specifications and industry standards by managing quality assurance processes and serving as the primary liaison for customer service accounts.
• Responsible for driving continuous improvement, resolving quality-related customer issues, and upholding compliance with regulatory and internal quality systems to enhance customer satisfaction and product reliability.

Customer Quality Liaison

• Act as the primary contact for customer quality-related inquiries and complaints
• Coordinate resolution of customer issues through root cause analysis and corrective actions

Quality Control Oversight

• Monitor inspection and testing procedures are followed
• Monitor product conformance to IPC and customer-specific standards

Documentation & Compliance

• Maintain quality records in accordance with ISO 9001 and internal QMS protocols
• Prepare and submit quality reports to customers and internal stakeholders

Process Improvement

• Identify recurring quality issues and lead initiatives to improve manufacturing pro
• Support implementation of Problem-Solving methodologies

Audit & Review

• Participate in internal and external audits
• Ensure readiness for customers and regulatory inspection

Training & Support

• Provide guidance to production teams on quality standards and procedures
• Assist in onboarding new staff with QA related training
• Support new product introduction (NPI) with quality input and validation

Requirements:

• Degree in any Engineering discipline (Quality Engineering preferred) in a manufacturing environment
• Min 2 years of experience in Quality Assurance activities/operational
• Good communication, report writing and presentation skills
• Good analytical skills with ability to work effectively
• Independent, decisive and good at problem solving
• Able to adapt in a fast-paced environment
• Preferred with knowledge of PWB manufacturing processes
• Proficiency in Microsoft Office

Electronics MFG Industry

Loyang Area

Interested candidates, please forward a detailed resume and via email to hr@tempserv.com.sg

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

Key Responsibilities

• Lead the design and implementation of an integrated management system aligned with ISO 9001, IATF 16949, and ISO 26262, including defining scope, mapping end-to-end processes, establishing controlled procedures, and setting measurable quality and safety objectives.

• Act as Management Representative for ISO certification and external audit activities.

• Develop and maintain core QMS processes including document control, change management, risk management, internal audit, and management review.

• Define supplier quality requirements, manage quality agreements, and establish OSAT performance metrics.

• Conduct internal audits and manage corrective actions, including 8D and CAR processes.

• Drive continuous improvement initiatives across the organization to enhance quality and operational performance.

• Manage customer complaint handling, field quality issues, and product traceability systems.

• Deliver training to employees on QMS requirements, procedures, and compliance standards. 

Requirements

• Bachelor’s Degree in Engineering (Electrical, Electronics, or Mechanical preferred).

• Minimum 8 years of experience in Semiconductor or IC industry. Candidates can come from Principal Engineer, Staff Engineer, or Senior Engineer background (Quality Manager experience is not mandatory).

• Strong experience in OSAT environment is required.

• Solid knowledge and hands-on experience with ISO 9001 and/or ISO 26262, as well as IATF 16949 standards.

• Good understanding of quality systems, audit processes, and semiconductor manufacturing workflows.

• Strong crisis management and problem-solving skills under pressure. 

If interested, please submit your application to cvs@jdawms.com with your expected salary and resume.

We regret that only short-listed candidates will be contacted shortly. By submitting your application or resume, you agree to the collection, use, retention, and sharing of your personal information with potential employers for their assessment.

JDA WMS Pte Ltd | EA Personnel: Pham Thi Tuyet Mai 

EA License No: 23S1595 | EA Registration No: R25127838

Roles & Responsibilities

• Arrange and conducts material and installation inspection
• Prepares the project quality plan and inspection and test plan
• Prepares material submittals for Client’s approval
• Assists the project manager on the method of statement preparation
• Oversee the overall on-site quality aspect of the project and ensure that the project team adheres to the requirement stipulated in the approved Project Quality Plan (PQP)
• Manage quality documentation such as certificates, test results and non-conformance reports are properly maintained and controlled
• Collaborate with the site team to resolve problems and prevent future defects
• Review of project specification ensuring the material proposed are complying to the specification
• Report any non-conformance (NC) and issue corrective actions (CAR)
• Prepares response for any non-conformities issued
• Arrange and conducts handing over inspection with the Main Contractor after completion of the work

Job Requirements:

• Diploma or Bachelor’s Degree in Civil Engineering / Architecture
• Minimum 5 years of local QA/QC experience in civil/architectural works
• Strong knowledge in QA/QC tools and procedures
• Knowledge in ISO 9001
• With leadership, strong documentation, communication and organisation skills
• Knowledgeable in local authority requirement
• Fluent in English with excellent interpersonal skills

• Coordinate and monitor construction activities to ensure work progresses according to the project schedule.
• Plan and track site works in line with the master programme and detailed work schedules.
• Liaise with the Professional Engineer on matters relating to temporary works and technical requirements.
• Work closely with consultants and subcontractors to resolve technical issues and ensure smooth site operations.
• Conduct site inspections, maintain construction quality standards, and address engineering issues promptly.

Requirements:

• Diploma in Civil Engineering or equivalent
• At least 5 years of relevant experience in construction projects with LTA infrastructure works.
• Experience with diaphragm wall (D-wall), bored piling, or tunnelling works.
• Able to coordinate site teams, subcontractors, and consultants effectively.
• Strong problem-solving skills and ability to manage site operations in a structured manner.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality System

1. Develop, implement and maintain QMS documentation to maintain compliance with applicable standards such as ISO 9001, ISO 13485 or GMP

2. Monitor regulatory changes and update the QMS accordingly

3. Conduct internal audits and support external audits (external auditing bodies, suppliers and customers)

4. Analyze quality data and metrics to identify trends and areas for improvement

5. Collaborate with cross functional teams to ensure that the quality standards are integrated into processes

Management Representative

1. Reports on QMS performance to top management and recommend improvement

2. Point of contact for certification bodies

3. Lead Management Review and follow up action items

Product Quality Management

1. Analyze and capture recurring product complaints, collaborate with Operation and Technology teams to address compound specified failures

2. Operational Quality Support. To facilitate continuous improvement initiatives, by providing on the floor support through use of quality tools and coaching teams to build ownership and proactive engagement with quality processes.

Customer Complaints Management

1. CCAR Manager. Manage the customer complaints handling process to ensure that all complaints are logged with right information for investigation till auditing process

2. Collaborate with cross functional team during the investigation, resolution and communication of customer complaints

3. Review interim CCAR reports to ensure that root cause is data driven and corrective action(s) address the root cause

Supplier Complaints Management

1. SCAR Manager. Approve SCAR – Supplier related complaints and defects, review and monitor the effectiveness of corrective actions

2. Collaborate with Procurement, Supplier and internal stakeholders to investigate issues and resolution

3. Collaborate with Procurement, Operation and Technology to assess risk and quality impact of raw material on finished goods

Global Quality Team Collaboration

1. Support the implementation of global quality initiatives, systems and tools

2. Ensure that local QMS aligns with global practices and corporate policies

3. Share best practices and lessons learned across global sites

Support Quality Contracts/Documentation

1. Review customer documents and quality related agreements for compliances to ensure clauses are relevant, assess the risks.

2. Response to customer request for certifications, compliance/quality related/audit documents

System

1. Conduct training for staff in Quality Procedure, Standards and Tools.

2. Lead processes identified by the Global Quality Team such as PPAP, QIR, CCAR, SCAR and Mastercontrol for the Asia Region

Requirements:

· Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

. Have knowledge of chemical production process in manufacturing environment

· Certificate in Quality Engineering is preferred. 6 Sigma certified will be at advantage

· 2-6 years of quality management experience.

· Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

· Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing.

· Good experience into customer & supplier audit and able to conduct training

· Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

· Occasionally overseas travel and weekly conference call is required for the role

· This position required to communicate closely with vendors and counter part in China.

Working hours:

Mon to Fri 8.30am - 5.30pm ( 1 day hybrid )

SUMMARY

Represent the quality function of technical support, in conjunction with other internal support groups, regarding issues affecting manufacturing.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

· Develop and maintain QA plans and process routings, which reflect intended/actual activities.

· Provide support for all quoting activities by participation in initial process design, development, and implementation phases.

· Evaluate and support inspection processes via inspection aids and instruction guidelines.

· Support all training programs by development and implementation of specialized training sessions for all applicable functions.

· Conduct periodic review and maintenance of all documentation files; develop appropriate systems for document storage and access.

· Review all supplier or customer discrepancies. Coordinate and track the corrective/preventative action effort.

· Provide trend analysis of defects occurring at the customer, supplier and internally.

· Participate in the vendor survey activities as applicable.

· Drive proactive participation with suppliers and (when possible) aid in their process improvement efforts.

· Interface with all departments as applied to the Policies and Procedures with special regard to ISO, EN4600 and GMP documentation.

· Monitor departmental activities and provide technical and logistical guidance/support for the quality engineering staff as applicable.

· Interface and provide technical support on quality issues with the customer as needed.

· Support and focus corrective action efforts and utilizing the SPC data and corrective action tracking package and create and implement any meetings, procedures, or team-building concepts as necessary as part of the corrective/preventative effort.

· Serve as liaison between Jabil Circuit and suppliers or customers on quality related issues.

· Improve technical support for the quality organization.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS

Bachelor's degree required and two years related experience; or equivalent combination of education and experience.

Experience in SMT/PCBA background.

Experience in Supplier Quality Management

Experience in Incoming Quality operation.

Job Description

1) Monitor and drive Quality performance (KPI) to meet company goal towards zero defect.

2) Ensure compliance to company and customer Quality requirements.

3) Engage and drive timely and effective failure/root-cause analysis (CAPA/8D) so as to prevent reoccurrence.

4) Develop and implement various quality, analytical, troubleshooting and risk analysis tools including FAI, 8D, CAPA, FMEA, Control Plan, Change Control, NPI.

5) Lead MRB review and disposition of non-conforming materials Communicate material.

6) Performing regular quality control process audits to ensure compliance with company and customer requirements.

7) Generate regular Quality reports, issue trackers and minutes.

8) Drive continuous improvement culture.

9) Support to customers with regarding to providing Quality support.

10) Develop or update Quality documentation to ensure they are up-to-date.

11) Any other matter required by the Quality Manager.

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality System

1. Develop, implement and maintain QMS documentation to maintain compliance with applicable standards such as ISO 9001, ISO 13485 or GMP

2. Monitor regulatory changes and update the QMS accordingly

3. Conduct internal audits and support external audits (external auditing bodies, suppliers and customers)

4. Analyze quality data and metrics to identify trends and areas for improvement

5. Collaborate with cross functional teams to ensure that the quality standards are integrated into processes

Management Representative

1. Reports on QMS performance to top management and recommend improvement

2. Point of contact for certification bodies

3. Lead Management Review and follow up action items

Product Quality Management

1. Analyze and capture recurring product complaints, collaborate with Operation and Technology teams to address compound specified failures

2. Operational Quality Support. To facilitate continuous improvement initiatives, by providing on the floor support through use of quality tools and coaching teams to build ownership and proactive engagement with quality processes.

Customer Complaints Management

1. CCAR Manager. Manage the customer complaints handling process to ensure that all complaints are logged with right information for investigation till auditing process

2. Collaborate with cross functional team during the investigation, resolution and communication of customer complaints

3. Review interim CCAR reports to ensure that root cause is data driven and corrective action(s) address the root cause

Supplier Complaints Management

1. SCAR Manager. Approve SCAR – Supplier related complaints and defects, review and monitor the effectiveness of corrective actions

2. Collaborate with Procurement, Supplier and internal stakeholders to investigate issues and resolution

3. Collaborate with Procurement, Operation and Technology to assess risk and quality impact of raw material on finished goods

Global Quality Team Collaboration

1. Support the implementation of global quality initiatives, systems and tools

2. Ensure that local QMS aligns with global practices and corporate policies

3. Share best practices and lessons learned across global sites

Support Quality Contracts/Documentation

1. Review customer documents and quality related agreements for compliances to ensure clauses are relevant, assess the risks.

2. Response to customer request for certifications, compliance/quality related/audit documents

System

1. Conduct training for staff in Quality Procedure, Standards and Tools.

2. Lead processes identified by the Global Quality Team such as PPAP, QIR, CCAR, SCAR and Mastercontrol for the Asia Region

Requirements:

· Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

· Certificate in Quality Engineering is preferred.

· 4-6 years of quality management experience. Junior with 1-2 experience in related field can also apply

· Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

· Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing.

· Good experience into customer & supplier audit and able to conduct training

· Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

· Occasionally overseas travel and weekly conference call is required for the role

· This position required to communicate closely with vendors in China.

Working hours:

Mon to Fri 8.30am - 5.30pm ( 1 day hybrid )

Responsibilities

• Monitor the implementation status of internal audit recommendations by engaging process owners and ensuring timely closure of audit findings.
• Conduct internal control assessments and reviews for assigned projects or business initiatives.
• Maintain and update Group policies, SOPs, and procedure manuals to ensure accuracy and alignment with operational needs before circulation.
• Ensure the organisation adheres to regulatory and statutory requirements, including guidelines set by relevant authorities.
• Lead the Group’s Business Continuity Management initiatives, including reviews, testing, and documentation.
• Oversee the enterprise risk framework, maintain the Group’s risk register, and prepare annual risk reports, including inputs for the Sustainability Report.
• Coordinate and review annual Internal Control Self-Assessment submissions from various business units globally.
• Partner with stakeholders across real estate, hospitality, and investment divisions to strengthen internal controls and promote a robust risk-aware culture.

Requirements:

• Possess at least an Degree in Accountancy/ACCA; CA or CIA certification
• At least 5 years of experience in internal audit, internal controls, risk management, or compliance—ideally within real estate, property development, or hospitality.
• Strong background in Big 4 audit and commercial internal audit or internal controls roles.
• Independent, meticulous, and discreet, with strong initiative, excellent communication skills, and the ability to draft policies and manage risk registers effectively.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to ken.ng@peopleprofilers.com

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: 9334RW44

• Inspect incoming and outgoing supplies for quality compliance

• Monitor in-process repair and maintenance works

• Conduct final inspections of completed services and goods

• Maintain inspection documentation and records

• Analyse data to improve processes and reduce wastage

• Collaborate with internal teams and liaise with clients on quality issues

• Handle receipt and issuance of goods

• Any other adhoc duties as assigned
  

Requirements:

• Min 1 year experience in Quality Control

• Proficient in Microsoft Office applications

• Working Location: Ubi

• Working Hours: Mon - Thurs (8am - 5.30pm), Fri (8am - 5pm)

• Salary: Up to $3500

• Able to start work immediate or on short notice
  

How to apply:

Interested applicants kindly state your expected salary, last drawn salary and starting date.

We regret to inform that only shortlisted candidates will be notified.

Log on to www.e-cruitteam.com.sg for more job opportunities!

EA Personnel: Teo Kai Xin, Joey
EA Reg ID: R23114229
EA Licence No.:19C9603

Quality Controller

Salary: SGD $2,500 – $3,000

Working Hours: 8:30am – 5:30pm (Mon to Fri)

Location: Woodlands

Job Responsibilities

• Perform quality inspections on incoming raw materials from suppliers to ensure compliance with specifications.
• Conduct in-process and final product inspections to meet company and industry standards (e.g., ISO 9001).
• Carry out quality testing and measurements using inspection tools such as calipers, micrometers, and gauges.
• Monitor production processes, identify deviations, and implement corrective and preventive actions (CAPA).
• Coordinate with suppliers, manufacturers, logistics partners, and customers on quality-related matters.
• Investigate and resolve quality issues and non-conformities in a timely manner.
• Maintain accurate inspection records, reports, and documentation in accordance with the Quality Management System (QMS).
• Support internal and external audits by preparing documentation and participating in audit activities.
• Collaborate closely with production and warehouse teams to ensure compliance with quality procedures.
• Perform ad-hoc duties as assigned by management.

Job Requirements

• Minimum Diploma or higher qualification
• At least 2 years of relevant experience in quality control or a manufacturing environment is preferred.
• Familiarity with ISO 9001 standards and QMS documentation.
• Proficient in Microsoft Office and able to communicate effectively via email.
• Detail-oriented, responsible, and able to work independently as well as in a team.
• Willing to work in both warehouse and production environments when required.

Company Name: Talent Recruitment Pte Ltd

EA License No: 24C2338

EA Personnel Name: Loke Sai Lye (Loke)

EA Personnel No: R24123366

Email: loke.dexter@talentrecruitmentsg.com

Contact Number: 8168 8648

Job Highlights:

• Location: Jurong East

• 1-Year Contract (Renewable / Convertible)

• Salary: Up to $6,000

• Bonus: 1-month completion bonus

• Working Hours: 8:30am – 5:30pm

• Working Days: Monday – Friday

About the Role

We are seeking an experienced Quality Manager to support customer-facing quality operations within a dynamic manufacturing environment. This role involves managing quality performance, handling customer feedback, and ensuring continuous improvement in product quality.

Key Responsibilities

• Provide quality support and act as the main point of contact for customers in Singapore

• Monitor and manage key performance indicators (KPIs), including complaint rates and yield performance

• Act as a liaison between internal teams and customers to resolve quality issues

• Receive, investigate, and track customer feedback and quality anomalies

• Implement corrective and preventive actions to improve product quality

• Apply quality tools and methodologies to drive continuous improvement

• Build and maintain strong relationships with customers

Job Requirements

• Minimum 3–5 years of relevant experience in quality management within manufacturing / EMS environment

• Familiar with quality tools and methodologies (e.g. root cause analysis, CAPA, etc.)

• Strong problem-solving and communication skills

• Customer-focused with good stakeholder management abilities

• Willing to travel overseas (1–2 times per year)

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON or email the updated resume to miya@mci.com.sg

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

https://www.mci.com.sg/wp-content/uploads/2025/09/MCI-Job-Applicant-Data-Protection-Notice.pdf

Kuan Mei Yang

Registration Number: R24124509

EA License No: 06C2859 (MCI Career Services Pte Ltd)

Job Description

• Industry/ Organization Type: Chemical Manufacturing
• Position Title: QA Engineer
• Working Location: Tuas (Walk distance from MRT)
• Working Hours: 5 Days, Monday – Friday (8.30am – 5.30pm)
• Salary Package: Basic Salary + Allowances + AWS + VB
• Duration: Permanent

Key Responsibilities

• Manage incoming inspections and evaluate supplier performance, identifying trends and implementing quality improvements.
• Track product quality from incoming to outgoing stages using SPC, ensuring compliance with customer specifications.
• Maintain and update QA documentation in line with ISO standards and internal quality systems.
• Work closely with cross-functional teams to resolve quality-related issues across departments.
• Ensure the accuracy and integrity of QA data and records according to established procedures.
• Investigate quality issues, perform root cause analysis, and implement corrective actions.
• Support customer queries by preparing and coordinating quality-related documentation.
• Prepare and review quality documents (e.g. COA, reports) in accordance with procedures and customer requirements.
• Handle customer complaints by conducting investigations and ensuring timely resolution with proper documentation.
• Coordinate sample evaluations and ad-hoc sampling activities, analysing data to support quality decisions.
• Plan and participate in internal and external audits to ensure compliance and audit readiness.
• Conduct risk assessments, FMEA, and training, while supporting continuous improvement initiatives.
• Promote and participate in company quality and EHS programmes.
• Carry out additional duties as assigned in line with business needs.

APPLY NOW!!!

• Diploma or Degree in Chemical, Science, or a related discipline.
• Minimum 2-3 years of relevant experience.
• Solid knowledge of quality control practices and statistical analysis techniques.
• Effective communication skills, both written and verbal, with good interpersonal and presentation abilities.
• Familiarity with ISO9001, ISO14001, and ISO45001 standards will be an added advantage.
• Proficient in Microsoft Office applications.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #83859 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Vector Control Technician (Urgent Hiring)

• S$2,100 – S$2,700 basic + variable bonus

• Reporting to Taiseng office

• Depends on the contract (timing to be advise during interview)

  • 4-5 days’ work week (depends on their client’s requirements)

  • Inclusive of Saturday and Sunday

Roles & Responsibilities

We are looking for a responsible Vector Control Technician to carry out pest management services at various client sites. The role involves inspection, treatment, and prevention of pest infestations while ensuring compliance with safety and company standards.

Key Responsibilities:

• Conduct site inspections to identify pest infestations and assess treatment requirements

• Carry out pest control treatments (e.g. spraying, baiting, trapping)

• Install and maintain pest control equipment and systems

• Prepare service reports and maintain proper documentation

• Ensure all work is performed in accordance with safety guidelines and regulations

Requirements:

• Hold a valid NEA Vector Control Technician Licence

• At least 3 years of pest control experience

• Able to work outdoors and at heights as required

Overview
We are seeking a dedicated and experienced HSE / Quality Control Manager to join our team. This role is pivotal in overseeing and integrating our Health, Safety, Environmental (HSE), and Quality Control (QC) functions. The successful candidate will be responsible for developing, implementing, and maintaining robust management systems to ensure a safe, compliant, and high-quality work environment. This is a key leadership role that will drive a culture of safety and continuous improvement across all aspects of our operations.

Key Responsibilities

• Health, Safety & Environment (HSE):

  • Develop, implement, and maintain comprehensive HSE policies and procedures in full compliance with Singapore's Workplace Safety and Health (WSH) Act and other relevant regulations.

  • Conduct regular risk assessments, hazard identifications, and job safety analyses (JSA) for all manufacturing processes, warehouse activities, and office environments.

  • Lead and manage the HSE team, including internal and external safety audits, inspections, and monitoring programs.

  • Lead incident and near-miss investigations, ensuring root cause analysis is performed and effective corrective and preventive actions (CAPA) are implemented.

  • Organize and deliver periodic HSE training for all employees, covering topics such as hazardous chemicals, PPE usage, first aid, fire safety, and emergency response.

  • Manage all environmental compliance matters, including waste management, chemical storage, and sustainability initiatives aligned with our commitment to green building standards.

  • Champion a proactive safety culture, promoting safety awareness and employee engagement through programs like safety committees and communication campaigns.

• Quality Control (QC):

  • Oversee the entire quality control process for incoming raw materials, in-process production, and finished goods to ensure they meet stringent internal specifications and external regulatory requirements.

  • Develop, implement, and maintain the Quality Management System (QMS), ensuring alignment with ISO 9001 and ISO 14001 standards.

  • Lead internal and external quality audits, managing non-conformance reports (NCRs) and ensuring timely and effective closure of corrective actions.

  • Establish and monitor key quality performance indicators (KPIs) to drive continuous improvement in product quality and process efficiency.

  • Collaborate closely with production, procurement, and R&D teams to resolve quality-related issues and implement process improvements.

• General:

  • Prepare and present regular HSE and QC performance reports to management, supporting data-driven decision-making and strategic planning.

  • Liaise with external regulatory bodies, certification agencies, and customers on all HSE and quality matters.

  • Manage work cover, return-to-work programs, and workers' compensation cases in coordination with HR.

Qualifications & Requirements

• Education: Bachelor's degree in Occupational Health & Safety, Environmental Science, Quality Management, Engineering, or a related field.

• Experience: Minimum 5-7 years of progressive experience in a combined HSE and Quality Control management role, preferably within a manufacturing, chemical, or construction materials environment.

• Certifications: Professional certifications such as CSP, CIH, Registered WSH Officer, ISO 9001/14001 Lead Auditor, or equivalent.

• Knowledge: Thorough knowledge of Singapore WSH regulations, ISO management systems (9001, 14001, 45001), and quality control methodologies (e.g., SPC, FMEA, 8D).

• Skills:

  • Proven leadership and people management skills, with the ability to influence and engage employees at all levels.

  • Strong analytical and problem-solving abilities, with experience in root cause analysis and CAPA.

  • Proficiency in Microsoft Office Suite and experience with HSE/Quality management software.

  • Strong organizational and time-management skills, with the ability to manage multiple priorities.

EA Personnel R22110043 Tan Eng Kang

EA License 21C0430 A Dreamworks Company Pte Ltd

We are looking for a motivated individual to join our Quality team. This role is suitable for candidates who are keen to build experience in quality systems, manufacturing support, and audits within a regional environment.

Key Responsibilities:

• Support the monitoring and enforcement of quality reporting systems
• Ensure proper documentation of Quality Procedures and Work Instructions
• Assist in preparation of Material Data Books and review of vendor documentation
• Support internal and vendor audits, as well as quality planning activities
• Analyze quality data and assist in root cause analysis and continuous improvement initiatives
• Provide support to manufacturing operations across regional locations when required

Requirements:

• Minimum Diploma in a technical discipline (Candidates with ITE qualification and relevant years of experience will be considered)
• At least 1-2 years of relevant working experience
• Willing to learn and develop in quality systems and manufacturing processes
• Proactive, detail-oriented, and a good team player
• Able to work at Gul Circle

Are you passionate about ensuring the highest standards of quality and regulatory compliance in a dynamic environment? Do you excel at building strong supplier relationships and driving continuous improvement? If so, we have an exciting opportunity for you to join our team as a Lead Supplier Quality Auditor, based in Singapore. 

This is your chance to contribute to impactful work in the medical device industry, where your expertise will directly support our mission of improving lives through innovation and quality.

As Lead Supplier Quality Auditor, you will be an integral part of our dynamic team. You will directly contribute to the success of our supplier auditing program by conducting audits to ensure suppliers meet strict regulatory and quality standards. Your work will play a vital role in maintaining the integrity and compliance of our supply chain.

What to Expect:

Conduct Supplier Audits: Execute audits across APAC (focusing on technical processes) to suppliers as part of the audit program, ensuring compliance with applicable standards, regulations, and Hologic specifications. Review production processes to identify improvement opportunities.

Supplier Action Plan Management: Manage and follow up on supplier action plans (SACAs) resulting from audits and assessments.

Issue Escalation: Notify and escalate any potential supplier quality or regulatory issues to the Supplier Quality Auditing Manager that could impact product quality or compliance.

Cross-Functional Collaboration: Work with other Supplier Quality Auditors/Engineers and cross-functional teams to troubleshoot and resolve supplier quality issues. Identify Subject Matter Experts (SMEs) for audit teams as needed.

Reporting: Participate in reporting supplier quality Key Performance Indicators (KPIs).

Audit Documentation: Ensure supplier audit file records are accurate, up-to-date, and properly maintained.

Audit Scheduling: Participate on the development and maintenance of the annual audit/assessment program schedule using a risk-based approach, including assessing controls and determining appropriate audit frequency.

Technical Expertise: Apply advanced knowledge of technical processes, materials control, and manufacturing processes to drive supplier quality improvements.

What We Expect:

Qualifications & Knowledge:

• Education: Bachelor’s degree in Engineering (Biochemical, Chemical, or related field). An ASQ Supplier Quality Engineer Certificate is a plus.
• Quality Auditor, with an accreditation record Certifications. Required accreditation from one of the following: ASQ (American Society for Quality) CQA (Certified Quality Auditor) or CBA (Certified Biomedical Auditor), IRCA (International Register of Certificated Auditors) Lead Auditor Registration, RABQSA Lead Auditor Certification or equivalent government body certification.
• Experience with master validation plans, protocols, and reports (IQ, OQ, PQ) and risk management (pFMEAs) process and documentation
• Industry Experience: 8+ years’ experience in medical device manufacturing or a related industry, with 5+ years in a Quality Auditing function preferred.
• Working knowledge of Medical Device Regulations/In Vitro Diagnostic Regulation, cGMP, CFR 820, ISO-13485 (Required).
• Strong Communicator: Ability to effectively communicate at all levels of the organisation, both written and verbal.
• Analytical Mindset: Skilled at analyzing data, evaluating factors, and translating insights into actionable plans.
• Self-Motivated: Able to work independently with minimal supervision, while managing multiple complex projects.

Why Hologic?

• Work on impactful projects that make a difference in the medical device industry.
• Build relationships with suppliers around the globe, develop your skills and grow your career in a supportive and collaborative environment.

Travel Requirements: 50 - 60%
Language Requirements: Proficient in English (written and oral). A second language is a plus.

This role reporting to QA & H&S Manager, support daily production through final quality checks, SIRIM documentation, and coordination with machine operators in compliance with SOPs.

Role Responsibilities

· Conduct quality checks on final products produced from the machine to ensure compliance with quality standards.

· Complete and maintain all machine records as required by SIRIM and internal quality procedures.

· Prepare and submit daily product samples for quality inspection.

· Collaborate with team members and machine operators to ensure product quality is consistently maintained.

· Report any defects, abnormalities, or quality issues to the supervisor immediately.

· Ensure compliance with safety, hygiene, and production SOPs at all times.

· Support ongoing improvements in production and quality processes when required.

Requirements

· Certificate in Manufacturing/Quality/Engineering or related field is an advantage

· Preferably with experience in quality control, production, or manufacturing environment

· Ability to understand and follow SOPs, quality standards, and documentation requirements (e.g., SIRIM).

· Good communication skills and ability to work well with operators and team members.

· Detail-oriented, responsible, and able to identify quality issues accurately.

· Basic computer skills for data entry and record-keeping.

· Willing to work in a production floor environment and perform routine checks

Working hours:

12 hrs shift 8am-8pm / 8pm - 8am

1 day rest

• Quality Engineers oversee all quality-related activities of processes within their area of responsibility. They drive the continuous improvement of processes, products and services. Their deep know-how of processes and procedures will enable them to co-define and put through efficient and effective corrective measures. They strongly support production in decision-making and problem-solving routines, applying the latest tools.

Key Responsibilities

• Maintain and improve the Quality Management System in accordance with IATF 16949 requirements.
• Conduct internal process, system, and product audits, including follow-up and verification of corrective actions.
• Perform quality planning activities: APQP, PFMEA, Control Plans, PPAP, MSA, and SPC.
• Lead root cause analysis and corrective actions using structured problem‑solving tools (8D, 5 Why, Ishikawa).
• Review engineering drawings and specifications; ensure alignment with manufacturing and inspection requirements.
• Manage non-conformities, customer complaints, and CAPA activities.
• Support supplier quality tasks such as supplier audits, incoming inspections, and material disposition.
• Prepare and maintain quality documentation, reports, KPIs, and audit records.
• Drive continuous improvement initiatives to enhance product quality, process capability, and operational efficiency.

Metrology & Measurement Responsibilities

• Perform dimensional measurement and verification using a range of metrology and precision measurement tools.
• Operate and interpret results from measurement equipment such as:
• CMM (Coordinate Measuring Machine)
• Height gauges, micrometre, calipers
• Vision inspection systems
• Profile projectors, Smart scope
• Surface roughness testers
• Hardness testers
• Develop and maintain measurement procedures, inspection standards, and calibration documentation.
• Support calibration activities and ensure measurement equipment is maintained in accordance with metrology standards.
• Analýze measurement data and contribute to MSA studies (Gage R&R, bias, linearity).

Provide metrology training and technical support to production and quality