Total 506 Quality Assurance / Control job vacancies

- Obtain immediate containment, root cause and corrective action(s) on defects discovered at incoming inspection / manufacturing floor.

- Work closely with Buyers and Vendors to close out defect cases

- Drive internal corrective action with immediate disposition for defects deemed responsibility.

- Drive continuous improvement throughout supply base to meet quality and corporate goals.

- Perform supplier assessments and audits as required by audit plans.

- Guide new vendors and enforcing requirements to meet world class Quality standards

- Provide presentation materials for the following meetings: Board of Directors, Quality, Supplier and Manufacturing.

- Hold Quality Performance Review with vendors

- Make MRB decisions and drive immediate actions by working with responsible engineers.

- Responsible for measuring and hiting all inspection metrics including incoming defect rate,

ship to stock rate, inspection backlog and SCAR metrics.

- Responsible for Quality performance to Goals 5S/Safety requirements.

- Responsible for departmental compliance to division’s ISO9000 Quality System and all associated procedures, including engineering drawings, assembly and test procedures, etc.

- Responsible for the assessment, development and execution of inspection schedules in accordance with company requirements

- Manage safety reporting for the department.

- Well versed in inspection techniques in order to perform first article inspections and production validation of piece part components and assemblies during source inspection

- Familiar with inspection equipment from vernier to complex CMM layout inspection to perform source inspection at vendor’s site where necessary

- Electrical / electromechanical experience preferred

- Experience in driving quality improvement for mechanical commodities such as machining, sheet metal, frames or consumables

- Experience in driving quality improvement for electrical commodities such as PCBA, box build, cable & harness

- Able to interpret complex mechanical & electrical drawings and geometric tolerancing

Interested candidates, please email your resume to annasee@recruitexpress.com.sg

Anna See Sing Yee

CEI Reg R25157535

Recruit Express Pte Ltd

EA License No: 99C4599

We regret that only shortlisted candidates will be contacted

We are looking for a skilled and detail-oriented Senior/Lead Quality Engineer to join our team in government sector!

• Collaborative and innovative team environment, being part of a mission-driven team improving public service delivery
• Work location: Central (hybrid work arrangement)
• Candidate with experience in automation tools using Playwright are welcome to apply

What You'll Do

• Design and execute comprehensive test strategies covering payment processing and item distribution workflows
• Conduct thorough testing of front-end interfaces, admin portals, distribution tracking systems, and integration testing with other applications
• Create automated test suites for web applications, RESTful APIs, and inventory management systems
• Implement performance and scalability testing for high-volume distribution scenarios and payment processing
• Lead functional testing of distribution tracking, inventory management, and physical/digital redemption flows
• Support UATs (User Acceptance Testing) with government agencies and distribution partners
• Ensure quality across the end-to-end process from inventory management to payment processing to physical/digital redemption

How to Succeed

• Min 6-7 years of experience in automation testing using Playwright or Selenium/Appium
• Experienced at least one scripting language such as JavaScript, Java, Python, or similar for test automation
• Able to drive the automation, improve existing processes, good in articulate and well verse with QE processes

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
Contact you about potential opportunities.
Delete personal data not required at this application stage.
To withdraw consent, email dpo@scientecconsulting.com.
All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Liew Chien Hui - R2090138
ScienTec Consulting Pte Ltd - 11C5781

About the Role

We are looking for a detail-oriented QA Engineer with hands-on experience in T24 to TAP integrations within Private Banking systems.

Key Responsibilities

• Develop and execute test scenarios, test cases, and test scripts
• Perform functional, regression, and integration testing
• Validate B2F (T24 to TAP) flows across multiple modules
• Analyse defects, identify root causes, and support resolution
• Prepare and maintain test documentation and reports
• Conduct walkthroughs of test artefacts for stakeholder sign-off
• Ensure end-to-end test coverage across system flows

Requirements

• Hands-on experience in T24 modules:Securities (SC)Derivatives (DX)Structured Products (SY)
• Experience in T24 → TAP integration testing
• Knowledge of asset classes:EquitiesBondsFundsOptions
• Strong analytical and troubleshooting skills
• Ability to work independently and in a team

Position: Control Systems Engineer (Job ID: 20130)

• East area
• Allowance provided
• Medical benefits and attractive AL
  

Job Description:

• Design and maintain safety-critical control systems for automated manufacturing lines.
• Our client is a manufacturing company that designs and manufactures automatic machines and conveyor lines that are used in the manufacturing process for cleanrooms.

Key Responsibilities:

• The Software Control Engineer will develop, implement, maintain, and validate safety-critical control systems and software for industrial automation.
• The role will involve design, build, installation, troubleshooting and resolving technical issues, collaborating with cross-functional engineering team, and maintaining compliance with industry standards.
• Contribute to the testing and commissioning of equipment, ensuring reliability and functionality.
• Perform any other duties assigned by management.

Job Requirements:

• Diploma or Degree in Mechatronics/Electrical/Electronics/Computer – Engineering or equivalent.
• Knowledge in Control Systems Design, Concepts and Safety Compliance Documentation.
• At least 2 years’ experience in developing PC-based equipment control applications using C#, C/C++ or similar languages.
• Knowledge in PLC programming, I/O addressing and Industry Standard Communication (e.g. ModBus, TCP/IP, EtherCAT).
• Strong interpersonal skills and able to work both individually and in a team.

Interested applicants please send your resume to sarah@pasona.com.sg with email subject header "Job Application for Control Systems Engineer (East, Factory Automation, PLC Programming, AutoCAD) (Job ID: 20130)

We regret that only shortlisted candidates will be notified.
Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.http://www.pasona.com.sg/privacy.html

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions, EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

Please find the link below on MOM regulations:

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

Thank you for your cooperation.

Lee Yuan Shan

EA Registration No: R1879348

Pasona Singapore Pte. Ltd.

1 FINLAYSON GREEN #09-02 SINGAPORE 049246

Direct: +65 6239-4226 | General: +65 6732-6933

Email: sarah at pasona.com.sg

URL: www.pasona.com.sg

EA License No:90C4069

Responsibilities:

• Write and execute test cases (manual or automated)
• Identify defects and analyse results
• Ensure all quality issues are properly documented, tracked and resolved in a timely manner
• Build and improve test automation and scripts for various application testing, in accordance to test strategy
• Build, review and improve existing QC reporting system
• Work closely with the team to continuously identify risks and close those gaps to ensure comprehensive test coverage for every product release
• Proactively identify problems, plan solutions, recommend testing & automation solutions that will meet business needs of the team
• Maintain and update testing dashboard to make testing metrics and testing activities visible
• Produce test summary reports for each test cycle
• Ensure that products are released error-free and that all features function as intended
• Stay up-to-date with new technology trends, languages and techniques
• Report directly to QC Manager and perform R&D Activities related with QC
• Support various QA/QC work across multiple projects implementation

Qualifications:

• Diploma or Bachelor’s degree in Computing, Software Engineering, IT or related field
• Demonstrated expertise in software quality assurance, with a strong command of automated and manual testing
• Excellent documentation skills in drafting clear and concise test scenarios, test cases, along with in-depth knowledge of QA methodology
• Experience in either Java, JavaScript, Typescript programming languages
• Proactive, self-directed and able to work independently

Interested applicants please send your resume in MS Words format to Joanna.Tan@ambition.com.sg and attn it to Tan Joanna (R1104661)
Short listed candidates will be notified
www.ambition.com.sg
EA Registration Number: R1104661
Data provided is for recruitment purposes only
Business Registration Number: 200611680D. Licence Number: 10C5117

Job Descriptions:

· You are required to perform checks, prepare quality reports, and lead regular meetings with Clients, Consultants and sub-contractor.

· Responsible for establishment and implementation of Project's quality control system for MEP services construction activities executed by direct hire and subcontractor personnel.

· Supervise inspection activities performed by Quality Control (QC) and Field Engineers, in accordance with the Project Construction QC Plan.

· Supervise and coordinate the inspection and testing activities performed by Material Testing and Inspection subcontractor.

· Perform Quality Audits on office and site records.

· Monitor the progress and effectiveness of the project quality management system.

· Recommend and implement improvements when required.

· Ensure construction process implementation as per approved methodology & correct testing procedure as per approved ITP.

Requirements:

· Minimum 5-year experience of Quality Control matters.

· LTA Project Experience is preferred

· Singaporean/PR preferred.

Role Summary

We are hiring a Robotics QA Engineer to establish and run end-to-end quality practices for real-world robotics systems deployed in public and shared spaces. You will validate robotic autonomy(navigation/localization), manipulation behaviors, human robot interaction, and AI perception and agent components - ensuring releases are safe, reliable, and measurable across hardware and environments.

This role requires both breadth (robotics +AI + systems) and depth (building repeatable test methods, automation, and rigorous acceptance criteria). You will work closely with robotics engineers, AI engineers, and deployment teams.

Responsibilities

Test strategy and quality ownership

• Define a comprehensive test strategy across simulation, lab, and field environments.
• Establish release gates and acceptance criteria for autonomy, manipulation, robotics behaviour, and AI model updates.
• Own defect triage workflow: reproduce issues, isolate root causes with logs/telemetry, and drive closure.

Robotics validation and test engineering

• Navigation, Manipulation，Human Robot Interaction: Design and execute test scenarios, and task success metrics; build test datasets; validate safety behaviours; establish repeatable site-acceptance checklists and regression suites.
• AI/ML models and Agents: Define evaluation protocols; validate agent/planner behavior; support model release governance.

Automation and tooling

• Build automated test harnesses, CI-integrated regression tests, and reproducible test environments.
• Develop tooling for log capture, event replay, labelling for failure analysis, and metrics dashboards.

Required qualifications

• 3+ years in QA/test engineering for autonomous systems, embedded systems, or AI-heavy products.
• Strong understanding of autonomous systems and failure modes: sensors, localization, navigation, motion control, and safety behavior.
• Hands-on experience building test automation in Python and/or C++.
• Proven ability to design rigorous test plans to debug cross-disciplinary issues.
• Experience with Linux environments, networking basics, and hardware integration troubleshooting.
• Strong communication skills: can write precise test reports and collaborate effectively with engineers.

Preferred qualifications

• Experience with ROS/ROS2, simulation tools (e.g., Gazebo, Isaac Sim, Mujoco), hardware-in-the-loop test setups.
• Experience with voice/NLP or multi-modal interaction systems (ASR/TTS latency, intent routing, noisy environment testing).
• Experience with model evaluation pipelines (dataset splits, regression testing).
• Familiarity with safety or compliance practices for robots operating around people (risk analysis, operational constraints).
• Experience building debug pipelines: telemetry, log aggregation, incident replay.

Job Description & Requirements

Responsibilities:

· Understanding process requirements from Technical Spec & P&ID.

· Interaction with customer for getting inputs for designing and Development of Control System.

· Preparing the flow chart, FDS / FCD, system configuration, P&ID for Instrumentation and verifying the electrical drawing.

· Developing the PLC programming, HMI / SCADA Designing as off-site development and onsite commissioning.

· Field wiring and commissioning the instrumentation such as transmitters, switches, valves and motors.

· Conducting Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and related document preparation.

· Commissioning & troubleshooting for new & existing systems & Interaction with customer for Commissioning execution.

· Involve in the installation of new Equipment’s during plant expansion.

· Carry out Equipment improvements projects and modifications.

· Manage Projects including Testing and commissioning, on site installation, repair, maintenance and test tasks.

· PLC Programming of Life Safety Systems configurations.

· Diagnose errors or technical problems and determine proper solutions.

· Produce timely and detailed reports.

· Installing small additions and changes to existing systems.

· Follow all company’s filed procedures and protocols.

' Lead a team of engineers

Requirements:

· At least 10 years of hands-on experience in PLC & SCADA developments and Maintenance

· Hands-on experience in Siemens S7-400 CPU, Mitsubishi, Proface, Panasonic, Allen Bradley PLC’s and redundant system configuration

· Hands on experience in Wonderware ArchestrA SCADA system, WINCC and TIA Portal

· Familiar with Automation and Control engineering

· Proficiency in Profibus communication and troubleshooting

· Bachelor’s Degree in Electrical / Electronic Engineering or above

· Knowledge of MS Office

· Basic knowledge in Mechanics, Pneumatics and Hydraulics.

· Strong personality with a hands-on attitude.

· Ability to work rotating shift and perform overtime on weekdays & weekends.

· On call support during and after office hours.

Job Description

• Industry/ Organization Type: Manufacturer (Electrical Power Distribution, Control and Automation Systems)
• Position Title: QA Engineer / Assistant QA Engineer
• Working Location: Tuas Crescent (Transportation Provided)
• Working Hours: Monday – Friday, 8.15am – 5.45pm
• Salary Package: Basic + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Inspect incoming and outgoing parts according to specifications and procedures.
• Accurately record and manage quality data.
• Identify and report quality issues to management for corrective action.
• Segregate non-conforming products to avoid mix-ups before final decisions are made.
• Approve or reject parts based on quality standards.
• Conduct routine tests and checks on switchboards manufactured in-house.
• Test and commission switchboards on-site or on vessels, ensuring customer satisfaction and handling any quality complaints or warranty issues.
• Manage official tests requiring the presence of surveyors, consultants, or customers.
• Assist the QA Manager in achieving quality goals and responsibilities.
• Maintain high standards of cleanliness and organization in the QA Department.
• Strictly follow safety protocols for all activities.
• Ensure inspection tools are calibrated and functional.
• Proactively prevent product non-conformity.
• Recommend, implement, and check the effectiveness of solutions for identified problems.
• Oversee the resolution process for non-conforming products.
• Adhere to Quality Management System procedures to maintain compliance and control.
• Carry out other tasks as directed by supervisors.

APPLY NOW!!!

• Minimum ITE/ Diploma in Electrical Engineering or a related field.
• At least 1 year of experience in quality control or assurance, preferably in electrical or switchboard manufacturing.
• Ability to interpret technical documents and adherence to safety and quality standards.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #76200 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description :

• Support engineering teams in development & qualification of new technology solutions in a Testing Lab environment
• Support engineering teams in operating & troubleshooting of engineering equipment & test hardware in R&D Testing Lab. (Audio Precision, Function generator, Multimeter, Oscilloscope, Microscope, soldering station, Probe station).
• Responsible for both ASIC Chips in engineering equipment.
• Prepare and update report if there is any finding during testing.

Requirement:

• Min. Degree in Electronics Engineering or equivalent
• At least 3 years of relevant technical hands-on experience in test equipment, preferably from semiconductor industry.
• Self-discipline with a positive, pro-active attitude & abundance curiosity to learn and expand personal knowledge and skills.

Designation :

Test Engineer TE200924AQP

Salary: 4000 SGD ~ 6500 SGD

Positions: 5

Job description

• Test program development for Digital, PMIC, RF & Mixed Signal products on ATE (primarily on Advantest 93k - SmarTest 7, SmarTest 8 / Teradyne UFLEX)
• Work closely with the design engineers on the first silicon debug, device characterization, test program bring up and production release activities
• Debug of digital vectors (JTAG/SCAN/ATPG / Functional / Mbist) and Device characterization across PVT (Process, Voltage and Temperature)
• Understanding and experience in characterization of Mixed Signal IP (ADC, DAC, PLL and etc.)
• Involve on test program hand off, production release, yield improvement and test time reduction
• High level of collaboration and interaction with different Product Engineering, Design Engineering, Quality Engineering, and Foundry Engineering teams.

Job Requirements

• Graduates from Diploma/ Degree in Electronics / Electrical Engineering
• Minimum 2-5 yrs relevant experience on the Test Engineering is preferred
• Hands on experience on Teradyne Ultra Flex or Advantest 93K ATE’s is added advantage.
• Good  Knowledge of analog and digital electronics is desired.
• Strong analytical and problem solving ability with desire to perform hands-on work within a lab environment is a must.
• Very strong verbal and written communication skills and able to work independently
• Only Singaporeans/ SPR preferred.

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Info can be shared ATM: -

• Basic UP $4K (W Exp) + AWS + VB
• 5 Days office hours
• Loyang

Your Responsibilities: -

• Maintain and update documents and records on ISO 9001, ISO 14001 and ISO 13485 system
• Conduct & liaise internal and external audits
• Generate monthly report/summary of OQA rejects, customer returns, RMA, external & internal 8D, revised specs and procedures.
• Review and update Quality Management System procedures to meet the quality system requirements.
• Manage internal and external corrective action reports (CAR)
• Plan and conduct periodic system audits and participate in customer or supplier audits for compliance.
• Maintain and conduct regular review of calibration and preventive maintenance for instruments and equipment

You will need: -

• Min. 1 years of relevant working experience
• Possess knowledge of ISO 9001, ISO 14001 & ISO 13485 quality system

Email to kennyho@recruitlync.com

Good Luck! Only shortlisted candidates would be notified.

Ho Tze Chin (Kenny) R1762905 | Recruit Lync Pte Ltd 22C1000

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 5 years of experience in QMS, AS9100, NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Key Responsibilities

Test Strategy & Quality Engineering

• Design, develop, and execute comprehensive test strategies, plans, and test cases across the Agile lifecycle
• Translate acceptance criteria into effective test scenarios to ensure features meet defined quality standards

Testing & Automation

• Perform both manual and automated testing across functional, integration, system, and UAT levels
• Contribute to building and enhancing automated test frameworks and continuous testing practices

Defect Management

• Identify, document, prioritise, and track defects through to resolution
• Work closely with developers to triage issues, validate fixes, and ensure timely closure

Agile Collaboration

• Partner with developers and product owners to test early and continuously within sprints
• Support UAT activities, including preparation of test artefacts, validation, and evidence gathering

Documentation & Reporting

• Maintain clear and audit-ready test documentation, including test plans, cases, and reports
• Ensure proper logging of test results and defect tracking

Requirements

• Bachelor’s Degree in Computer Science, Information Systems, Engineering, or a related field (or equivalent practical experience)
• Minimum 5 years of experience in software testing or quality assurance within Agile environments
• Strong experience in both manual and automated testing (unit, integration, system, UAT)
• Hands-on experience with test automation tools such as Selenium, Cypress, JUnit, TestNG, or similar
• Familiarity with Agile methodologies and continuous testing within CI/CD pipelines
• Proven ability to collaborate effectively with cross-functional teams
• Excellent attention to detail with strong documentation and reporting skills

Work Location: One North

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to kayla@talentsis.com.sg for immediate processing.

Only shortlisted candidates will be notified.

Designation :

Test Engineer TE200924AQP

Salary: 4000 SGD ~ 6500 SGD

Positions: 5

Job description

• Test program development for Digital, PMIC, RF & Mixed Signal products on ATE (primarily on Advantest 93k - SmarTest 7, SmarTest 8 / Teradyne UFLEX)
• Work closely with the design engineers on the first silicon debug, device characterization, test program bring up and production release activities
• Debug of digital vectors (JTAG/SCAN/ATPG / Functional / Mbist) and Device characterization across PVT (Process, Voltage and Temperature)
• Understanding and experience in characterization of Mixed Signal IP (ADC, DAC, PLL and etc.)
• Involve on test program hand off, production release, yield improvement and test time reduction
• High level of collaboration and interaction with different Product Engineering, Design Engineering, Quality Engineering, and Foundry Engineering teams.

Job Requirements

• Graduates from Diploma/ Degree in Electronics / Electrical Engineering
• Minimum 2-5 yrs relevant experience on the Test Engineering is preferred
• Hands on experience on Teradyne Ultra Flex or Advantest 93K ATE’s is added advantage.
• Good  Knowledge of analog and digital electronics is desired.
• Strong analytical and problem solving ability with desire to perform hands-on work within a lab environment is a must.
• Very strong verbal and written communication skills and able to work independently
• Only Singaporeans/ SPR preferred.

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Oversea travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

JOB RESPONSIBILITIES:

• Review the Associated Part Processing Method (APPM) & Job Instruction Sheet (JIS) and ensure to meet the Engineering Print requirements
• Review the Tolerance Chart and ensure to meet the final requirements of the component upon stock removal.
• Review Inspection Plans, Inspection Gauges, Equipment, Methods & Techniques.
• Prepare & review First Article Inspection (FAI) Report Forms Ballooned E/P as per AS9102.
• Design the gauge, to meet the process requirement.
• Assist in ordering new Gauges.
• Preparing Document of FMEA, Control Plan, and Process Flow Chart.
• Preparing PPAP.

REQUIREMENTS:

• Minimum Diploma holder in Engineering
• Candidate with Quality Background in Precision Engineering
• Able to use all types of standard & specialize gauges (CMM) and good judgment when applying during inspection planning
• Tool and gauge planning
• Good knowledge in GD& T and interpretation
• Able interpret engineering print & the specifications
• Knowledge in gauge designing
• PPAP & FAI documentation
• Exposure to modeling & drafting in NX

ESSENTIAL FUNCTIONS:

• Participate in the new product design evaluation process. Provide design for test feedback and or requirements to the product team during the design phase to assure testability and test coverage as part of the validation plan. Based on the design requirements, develop a test plan and test specification. Manage and communicate project timelines and action plans effectively to deliver cost-effective test solutions on schedule and within budget.
• Mental and visual ability to independently design, develop and implement software using multiple programming languages (including C++, C#, NI TestStand or PLC, etc.) for production test equipment.
• Assist in development and implementation of departmental objectives. Help implement production and test strategies to meet financial objectives. Maintain and track project financials and timelines to meet the assigned project deliverables.
• Develop and implement strategies for the procurement and installation of all test related capital equipment required for production facilities.
• Responsible for design of electrical circuitry, properly sizing components and working with vendors to develop test fixtures. Selects proper test strategies based on test coverage requirements to ensure a safe, reliable, manufacturing test solution
• Create and release documentation on all aspects of the test solution: ▪ Manufacturing Test Plan ▪ Test specification ▪ Test coverage ▪ Test Procedures
• Demonstrate use of appropriate Lean Six Sigma tools for test equipment qualification, test system problem solving, and identification and implementation of continuous improvement opportunities.

EXPERIENCE AND EDUCATION:

• Bachelor's degree Electrical Engineering (EE), Electrical Engineering Technology (EET), Electrical Engineering/Computer Science (EE/CS), equivalent education, or experience.
• 5+ years’ experience as a test engineer contributor in a team oriented project environment, including design and development of test equipment for production.
• Experience developing and implementing software using languages or platforms such as C, C++, C#, NI Test Stand, etc. a plus
• Candidate must have the ability to read and interpret new product designs consisting of electronic circuit schematics and bills of materials (BOM).
• Knowledge of electronic hardware.
• Excellent troubleshooting, analysis, and problem solving skills.
• Good written and verbal communications in English.
• Proficient using Microsoft Office programs.

By submitting your personal data and/or resume, you give consent o the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

Qualified or Interested candidates, please email your updated resume in MS format: terenceng@envirodynamics.com.sg
Only shortlisted candidates would be notified.
EnviroDynamics Solutions Pte Ltd
Terence Ng Yew Beng
Reg. No: R1324803
EA License No.: 12C6285

Our client is test laboratory specializing in fast, reliable and accurate testing of metal.

JOB DIMENSION (SCOPE)

• Interpret and translate customer instructions into clear internal work instructions, ensuring alignment with quotations, specifications and referenced standards.
• Provide technical input to the Sales Administration Department to ensure accurate scoping of quotations and work orders.
• Liaise with customers to clarify test requirements, provide technical advice, and address queries related to sample preparation, testing methods, and turnaround times.
• Coordinate job scheduling between the Workshop and Test Departments, ensuring timely prioritization and readiness of samples.
• Support process improvements by reviewing SOPs and contributing to training and development initiatives for junior staff and workshop teams.

JOB REQUIREMENTS

• Bachelor’s Degree in Materials Science or Mechanical Engineering.
• Minimum 1 year of relevant experience in a laboratory operating under ISO/IEC 17025:2017.
• Strong understanding of metallic materials, alloy specifications, and chemical compositions (e.g., steel, stainless steel, nickel, cobalt, aluminium, titanium).
• Knowledge of welding processes, welding consumables, and material properties in industrial applications.
• Strong technical foundation in materials engineering and analytical testing techniques.
• Good communication and relationship building skills with both internal teams and customers.
• Ability to explain technical topics clearly and provide effective recommendations.
• Certifications such as CWI or CSWIP 3.1, and PCN Level 2 in Visual Inspection will be advantageous.

Onion Search Pte Ltd

EA License No: 24C2108

EA Personnel: Clover Lai Kah Wai

EA Personnel No: R24120119

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Oil & Gas industry with experience in Supplier Quality
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900