Total 506 Quality Assurance / Control job vacancies

SUMMARY:

The Training and Quality Assurance Officer is responsible for ensuring the company maintains and adheres to vehicle engineering maintenance policies, procedures & standards and effectively monitors adherence through regular audits to ensure compliance as well as providing an engineering training service to the Singapore engineering function and assisting in the specification of new vehicles and components, working with the manufacturers to ensure the correct product is delivered on time, to specification and is fit for purpose. The role requires close liaison with staff members at all levels across the business and with the Land Transport Authority (LTA) approved assessors and auditors.

PRINCIPAL RESPONSIBILITIES AND AUTHORITIES:

• Support the business, particularly the Engineering Director, with engineering compliance, Health and Safety and vehicle maintenance audit requirements;
• Coordinate an on-going schedule of internal engineering maintenance audits centred on monitoring compliance with LTA requirements;
• Provide the senior executive with regular updates on engineering maintenance audit reports, and if issues exist adopt a supportive and coaching approach to ensure that issues are rectified and to prevent recurrence;
• Perform follow-up audits to ensure audit recommendations have been implemented;
• Work with purchasing staff to establish quality requirements from external suppliers;
• Ensure vehicle inspection and repair processes meet international and national standards;
• Identify ways to reduce waste and increase efficiency;
• Monitor performance by gathering relevant data and producing statistical reports;
• Generate and publish reports that summarise engineering maintenance compliance audit findings, safety issues and contractor performance as well as identify any key issues that need to be brought to management’s attention;
• Generate, develop and integrate preventative maintenance and servicing schedules;
• Identify technical issues arising from operational experience and generate solutions either internally or through the vehicle manufacturer;
• Conduct complete cost analysis investigations identifying and implementing improvements including (but not limited to) monitoring the life span of high value units and analysis of early life failures;
• Devise, review and continuously update vehicle diagnostic procedures, work systems and overhaul procedures;
• Identify training requirements covering new technology at both depot shop floor and management level. This will involve supporting the implementation and delivery of training across the business;
• Responsible for producing monthly management reports summarising breaches of engineering compliance, safety issues, and identifying key issues that need to be brought to management’s attention;
• Provide technical support and guidance to front-line engineering to resolve vehicle problems;
• Establish and maintain provision of correct tooling and diagnostic equipment best suited for the depot staff and technician use. Ensure provision of training in the use of the equipment and provide front-line support as required by users of the tools and equipment;
• Support the accreditation of the ISO standards within the business;

Specification and Parts Quality

• Understand the business requirements of Singapore specification buses;
• Liaise with vehicle manufacturers and suppliers on matters related to reliability and quality; and
• Work closely with the Engineering Manager to ensure that buses and their component parts are performing to specification at acceptable cost.

Quality Management Standards

• Have a working knowledge of quality management standards;
• Undertake audits at Tower Transit Singapore;
• Follow up on non-conformance and assist in providing compliance solutions; and
• Liaise with external qualification bodies and assist as necessary in their audits.

REQUIREMENTS:

• Degree in Mechanical Engineering or equivalent with at least 2 years of engineering audit experience in an automotive industry or a Diploma with at least 5 years experience.
• Flexibility in working hours to ensure commitments to operational requirements are fulfilled;
• Remain up to date with any new engineering or health and safety legislation, or policy that may affect the working environment or vehicle maintenance regime;
• Appropriate trades qualifications;
• Experience and thorough knowledge of bus maintenance;
• Qualified Auditor;
• Experience working at a senior compliance/audit level ideally within the transport industry with a demonstrated track record of results;
• Demonstrated leadership and motivation skills;
• Build strong working relationships both internally and externally;
• Strong communication skills, both written and oral, with ability and confidence to undertake group presentations;
• Computer literate with relevant experience in diagnostics and repair software;
• Understanding or a willingness to learn bus depot operational procedures and working practices; and
• Candidate with ACTA certification would preferred.

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 5 years of experience in QMS, AS9100, NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Responsibilities:

• Maintain accurate and up-to-date ISO 9001, ISO 14001, and ISO 13485 documentation, including Quality Manuals, procedures, work instructions, and records, to ensure system compliance and management review readiness.
• Plan, coordinate, and conduct internal and external audits to ensure organizational readiness for third-party certification, management reviews, and customer audits.
• Collaborate with internal stakeholders to support and participate in customer and supplier audits to ensure compliance requirements are met.
• Review audit findings, develop corrective action plans, and drive continuous improvement initiatives.
• Generate and review supplier quality performance reports, work closely with suppliers to resolve non-conformances, and promote continuous improvement.
• Issue, monitor, and follow up on Supplier Corrective Action Requests (SCAR), ensuring effectiveness and timely closure.
• Support qualification and onboarding of new suppliers to maintain a robust pipeline aligned with production requirements.
• Manage calibration schedules and preventive maintenance programs for equipment to ensure operational reliability and compliance.
• Address quality issues arising from production and customer feedback by working closely with production teams to implement corrective actions and resolve customer complaints with proper documentation.
• Ensure timely closure of Corrective and Preventive Actions (CAPA), non-conformance reports, and customer complaints, and publish quality performance reports.
• Lead Material Review Board (MRB) meetings with cross-functional teams to perform root cause analysis, implement corrective actions, and verify effectiveness.
• Supervise and lead QC inspectors to ensure parts inspection compliance with engineering drawings and quality standards.

Qualifications:

• Diploma in Quality Management, Engineering, Manufacturing, or a related field.
• Min 3 years of relevant experience in quality or manufacturing environments, with exposure to audits and documentation.
• Basic understanding of supplier management and quality coordination.
• Familiarity with commonly used quality management standards (e.g. ISO systems).
• Working knowledge of quality tools and process control methods.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Our client is a Manufacturing MNC, one of the leading players in the Contract Manufacturing sector. Due to business needs, they are now recruiting a QA Engineer to be part of their Quality team for ongoing transformation projects. They are located in the North – easily accessible.

Duties of QA Engineer

• Ensure the compliance of quality-related issues (internal, supplier, customer)
• Maintain product quality issues
• Handle releasing of finished goods and performing quality assurance
• Work with the team on managing customer and supplier complaints.
• Oversee and liaise in the effectiveness of the Corrective and Preventive action and ensure CAPA is closed on a timely basis.
• Responsible in risk management activities
• Provide support to any other quality matters as and when required, which including provide training to internal stakeholders

Requirements

• Minimum Diploma in relevant discipline
• 2-3 years of quality assurance experience in manufacturing industry
• Experience in ISO13485

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

EA License No: 19C9682
EA Personnel No: R2198636
EA Personnel Name: Oh Puey Xin

Responsibilities

• Manage customer complaints, corrective and preventive action programs.
• Work closely with customers, production and suppliers to meet the quality requirements.
• Review and prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
• Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Responsible for product quality management, implement quality plans, drive quality improvement projects and prepare quality report to identify problem areas and work on problem resolutions
• Interface with and handle customers/vendors on quality issues.
• Handle the customer quality/customer satisfaction issues for global and major customers, which include monitoring field complaints, coordinating investigation and following up within the business to ensure appropriate closure in a timely fashion.
• Assume the focal role for investigating high failure rate customer issues, coordinating the use of different resources to investigate the customer issues.
• Lead the internal team members in achieving the ISO9001:2015 accredited certification as well as customer-specific qualifications.
• Work closely with internal team members and external suppliers to address product-related quality issues, and drive corrective and preventive actions for continuous improvement.
• Lead the quality effort to identify key process and quality improvement in nonconformances (NCR) and rejects.
• Managing and monitoring to ensure organization compliance with Trade, Environmental Health and Safety requirement.
• Perform other duties as requested by management .

Requirement

• Min Diploma in Electrical Engineering, Mechanical Engineering or relevant
• Min 3 years of experience in Manufacturing/EMS/Semiconductor industry
• Knowledge in 5S, PFMECA, SPC & ISO 9000 series Quality system.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. e regWret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Our client is a Manufacturing MNC, one of the leading players in the Contract Manufacturing sector. Due to business needs, they are now recruiting a QA Engineer to be part of their Quality team for ongoing transformation projects. They are located in the North – easily accessible.

Duties of QA Engineer

• Ensure the compliance of quality-related issues (internal, supplier, customer)
• Maintain product quality issues
• Handle releasing of finished goods and performing quality assurance
• Work with the team on managing customer and supplier complaints.
• Oversee and liaise in the effectiveness of the Corrective and Preventive action and ensure CAPA is closed on a timely basis.
• Responsible in risk management activities
• Provide support to any other quality matters as and when required, which including provide training to internal stakeholders

Requirements

• Minimum Diploma in relevant discipline
• 2-3 years of quality assurance experience in manufacturing industry
• Experience in ISO13485

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

EA License No: 19C9682
EA Personnel No: R2198636
EA Personnel Name: Oh Puey Xin

Responsibilities:

• Support Test operation and maintenance/Troubleshoot of all Testing equipment

• Responsible for test equipment maintenance, calibration, PM and improvement.

• Online production test failure and testing low yield analysis dispose and follow-up.

• Online test equipment & accessories maintain and abnormality disposition.

• Support Daily Conversion with excess minimum of Conversion Daily following the Spec of different Customer requirement

• Identify problems as well as areas for yield and quality improvements and develop methods to improve productivity and reduce manufacturing cost

Requirements:

• Degree in Mechanical/Electrical Engineering and equivalent qualification.

• Min. 1 years of related job experience

• Knowledge of wafer fab facility process control and field instrument experience.

• Equipped with skill of Linux/Unix program.

• Creative problem-solving and troubleshooting skills.

• Familiar with IT/network function and configuration.

• Excellent critical thinking skills and a high level of numeracy.

• Able to commit work rotating day and night shifts

• Strong team working skills, with an ability to motivate others and to lead or manage teams and projects.

• Able to work independently and able to handle stress effectively.

• Familiar with Tester/Prober system maintenance is a plus.

Ready to Precision-Engineer Your Future?

Whether you’re looking for your first role or your next career move, UMC is where your future can take shape.

 Step into your future with us. Apply Now.

About United Microelectronics Corporation

United Microelectronics Corporation (UMC) is a leading global semiconductor foundry with over 40 years of innovation powering technologies across AI, automotive, consumer electronics, connectivity, and IoT. As one of the industry’s most established players, we enable breakthrough technologies through precision-engineered semiconductor manufacturing for customers across every major sector of the electronics world.

Headquartered in Taiwan, UMC has been present in Singapore since 2004 and continues to invest in local talent, technology, and advanced manufacturing. Our recent Fab expansion reflects our long-term commitment to building Singapore as a key hub for semiconductor innovation, and to creating stable, meaningful careers through innovation, teamwork, and progress.

Join a team that invests in your future from day one. With best-in-class training, hands-on experience and access to cutting-edge tools, UMC equips you to lead tomorrow’s tech landscape, right down to the nanometre.

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Responsibilities:

• Handle customer complaints, returns, and improvement requests; monitor progress and ensure efficient resolution.
• Coordinate customer audits, QA visits, and surveys, including follow-up activities to address findings.
• Manage customer requests and maintain relevant customer satisfaction metrics.
• Collaborate with cross-functional teams to resolve quality issues and meet customer requirements, driving product quality improvements.
  

Requirements:

• Minimum Bachelor's degree in Electronics Engineering, Electrical Engineering, Material Science, Chemistry and Physics.
• Basic understanding of semiconductor technology.
• >3 years’ relevant experience in module process/integration and/or quality field handling customer.
• Knowledge of problem solving (8D methodology), statistical techniques, production part approval process (PPAP) and planning/project management is an advantage
• Knowledge of ISO9001/ISO/TS16949 or VDA6.3 standards and audit handling/experience is preferred
• Strong project management skills and ability to plan effectively.
• Excellent communication and negotiation skills; capable of effective collaboration with external partners and customers.
• Proficiency in presentation skills.

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 5 years of experience in QMS, AS9100, NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Position Summary

The Senior/ Associate Engineer, Test Equipment reports to the Test Manager and is responsible for ensuring the smooth and efficient operation of test equipment and hardware. Other responsibilities include supporting test hardware maintenance and setup for engineering activities and production ramp-up, performing required test correlation, FA/REL verification testing, and assist in new test equipment move-in and buy-off.

Responsibilities

• Assemble, test, and maintain mechanical, electronic, and automated test equipment.
• Follow protocols to ensure quality control and optimal test equipment performance.
• Identify the cause of machine problems and implement permanent measures.
• Conduct machine ESD, grounding check and implement measures to ESD check findings.
• Collaborate with engineers to diagnose issues and improve systems.
• Document testing procedures and results to improve equipment utilization.
• Ensure workplace safety and maintain an organized environment.
• Uphold 6S standards within the shop floor environment.
• Perform any other duties assigned by Supervisor or Manager from time to time.

Requirements

• Minimum diploma in electrical and electronic engineering or equivalent.
• At least 1-3 years of experience in a testing and debugging environment.
• Familiar with the Advantest, Teradyne, Cohu tester platform.
• Familiar with TEL, Accretech, and SEMICS prober operation.
• Familiar with Turret and Pick-n-Place handler operation.
• Demonstrate excellent written and communication skills.
• Able to multi-task and work in a fast-paced environment with lots of ambiguity.
• Able to perform 12 hours rotating shift work/duty.

Responsibilities:

• Primarily develop software from scratch to completion (SDLC) for industrial automation systems.
• The incumbent will design, implement, resolve technical issues, maintain and validate safety-critical control systems.
• Able to contribute to building, installation, testing and commissioning of equipment, ensuring reliability and functionality.
• The role will involve collaborating with cross-functional engineering team and maintaining compliance with industry standards.

Requirements

• Diploma or Degree in Mechatronics/Electrical/Electronics/Computer with 3-5 years of similar working experience.
• Proficient in PLC programming, configuration, I/O addressing and industry standard communication protocols (e.g. RS232, Modbus, TCP/IP, EtherCAT).
• Knowledge in control systems design, safety compliance documentation, electrical engineering concepts and applications.
• Experience in PC-based motion control and user interface programming is a plus.
• Knowledge in SolidWorks Electrical and/or AutoCAD LT.
• Demonstrated ability to diagnose and resolve issues through effective troubleshooting.
• Strong problem-solving and analytical skills

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Novita Widjaja |Registration No: R22105960

Responsibilities

• Manage customer complaints, corrective and preventive action programs.
• Work closely with customers, production and suppliers to meet the quality requirements.
• Review and prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
• Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Responsible for product quality management, implement quality plans, drive quality improvement projects and prepare quality report to identify problem areas and work on problem resolutions
• Interface with and handle customers/vendors on quality issues.
• Handle the customer quality/customer satisfaction issues for global and major customers, which include monitoring field complaints, coordinating investigation and following up within the business to ensure appropriate closure in a timely fashion.
• Assume the focal role for investigating high failure rate customer issues, coordinating the use of different resources to investigate the customer issues.
• Lead the internal team members in achieving the ISO9001:2015 accredited certification as well as customer-specific qualifications.
• Work closely with internal team members and external suppliers to address product-related quality issues, and drive corrective and preventive actions for continuous improvement.
• Lead the quality effort to identify key process and quality improvement in nonconformances (NCR) and rejects.
• Managing and monitoring to ensure organization compliance with Trade, Environmental Health and Safety requirement.
• Perform other duties as requested by management .

Requirement

• Min Diploma in Electrical Engineering, Mechanical Engineering or relevant
• Min 3 years of experience in Manufacturing/EMS/Semiconductor industry
• Knowledge in 5S, PFMECA, SPC & ISO 9000 series Quality system.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. e regWret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add an Engineer, Test in Singapore. The position is based in our GES site at Marsiling. 

As an Engineer, Test, you will:

• Conduct DFT, feedback to customer if accessibility coverage is low (<80%)

• Quotations for ICT/FPT, FCT, program sockets

• Review FCT test specification together with supplier and customer (Leica)

• Setup Offline programming station, ICT and FCT

• Liaise with supplier and customer on test coverage enhancement

• Generate test WI, TMPCN

• Provide training to test operators and debug technician

• Conduct GR&R, IQ, OQ & PQ for test fixtures

• Compile test yield report

• Guide debug technicians on the troubleshoot of failed boards

• Attend to tester breakdown

• Test time reduction

• Work together with QME team on root cause analysis for high fallout failures

• Ensure preventive maintenance is executed

• Provide equipments list that required calibration to the QA department

• Ensure debug WIP is monitored and kept at a manageable level

• Failure analysis of failed boards

• Test gap analysis for NDF boards – liaise with customer

• Monitor aging boards ensuring TAT is not exceeded

Requirements

• Candidate must possess at least a Diploma in Engineering (others) or equivalent

• At least 4 year(s) of working experience in the electronics manufacturing or Medical Devices

• At least 2 years working experience in a Test PCBA environment

• Knowledge of Agilent 3070 tester is an added advantage

• Knowledge of Labview software is essential 

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Kindly note that only shortlisted candidates will be contacted. If your profile is a strong match, you can expect to hear from us within two weeks. Otherwise, we thank you for your interest and will keep you in mind for future opportunities where you can make a meaningful impact.

Disclaimer:

By submitting your application to Venture Corporation Limited and its group of companies, you acknowledge and agree that any personal data you provide will be processed for the purpose of evaluating your application for employment.

If you are not selected for this position, we may retain your personal data to consider you for future employment opportunities unless you inform us otherwise. Should you wish to withdraw your consent or request access to or correction of your personal data, please contact our Personal Data Protection officer by email: dat•••••••••••@venture.com.sg For more details, please refer to our privacy policy at Personal Data Protection Policy of Venture Corporation Limited.

Venture Corporation is aware of scams involving fraudulent job offers; where individuals pose as staff representing our company and/or post fake job openings. Kindly note that the company does not make job offers until after a candidate has submitted a job application and participated in a face-to-face interview.

Please be advised that all legitimate job opportunities at Venture Corporation and our subsidiaries are listed exclusively on our official careers page and verified job portals. Any job offer that requires payment or solicits personal information in the early-stage recruitment process is likely a scam.

We urge all candidates to remain vigilant and exercise caution when approached with suspicious job offers. If you have questions about any open positions at Venture Corporation, please contact us by email: hr.•••••••••@venture.com.sg

Kindly note that only shortlisted profiles will be contacted.

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add a Test Engineer in Singapore. The position is based in our GES site at Marsiling. 

As a Test Engineer, you will:

• Evaluating and testing software programs to verify they function according to user requirement

• Define and support test setup at NPI.

• Formulate test automation solutions, developing & executing test plans.

• Perform test validation and evaluate test coverage.

• Support product & testers failure analysis.

• Support testers maintenance program.

• Prepare weekly/monthly performance reports.

• Lead debug team activities

Requirements

• Min Diploma in Electrical & Electronics Engineering or similar.

• Experience in network & communication technology an added advantage.

• Familiar with various programming languages, automated testing tools, and database SQL.

• Minimum 4 years of relevant experience in Test PCBA.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family. 

Kindly note that only shortlisted candidates will be contacted. If your profile is a strong match, you can expect to hear from us within two weeks. Otherwise, we thank you for your interest and will keep you in mind for future opportunities where you can make a meaningful impact.

Disclaimer:

By submitting your application to Venture Corporation Limited and its group of companies, you acknowledge and agree that any personal data you provide will be processed for the purpose of evaluating your application for employment.

If you are not selected for this position, we may retain your personal data to consider you for future employment opportunities unless you inform us otherwise. Should you wish to withdraw your consent or request access to or correction of your personal data, please contact our Personal Data Protection officer by email: dat•••••••••••@venture.com.sg For more details, please refer to our privacy policy at Personal Data Protection Policy of Venture Corporation Limited.

Venture Corporation is aware of scams involving fraudulent job offers; where individuals pose as staff representing our company and/or post fake job openings. Kindly note that the company does not make job offers until after a candidate has submitted a job application and participated in a face-to-face interview.

Please be advised that all legitimate job opportunities at Venture Corporation and our subsidiaries are listed exclusively on our official careers page and verified job portals. Any job offer that requires payment or solicits personal information in the early-stage recruitment process is likely a scam.

We urge all candidates to remain vigilant and exercise caution when approached with suspicious job offers. If you have questions about any open positions at Venture Corporation, please contact us by email: hr.•••••••••@venture.com.sg

Kindly note that only shortlisted profiles will be contacted.

Our client is a Manufacturing MNC, one of the leading players in the Contract Manufacturing sector. Due to business needs, they are now recruiting a QA Engineer to be part of their Quality team for ongoing transformation projects. They are located in the North – easily accessible.

Duties of QA Engineer

• Ensure the compliance of quality-related issues (internal, supplier, customer)
• Maintain product quality issues
• Handle releasing of finished goods and performing quality assurance
• Work with the team on managing customer and supplier complaints.
• Oversee and liaise in the effectiveness of the Corrective and Preventive action and ensure CAPA is closed on a timely basis.
• Responsible in risk management activities
• Provide support to any other quality matters as and when required, which including provide training to internal stakeholders

Requirements

• Minimum Diploma in relevant discipline
• 2-3 years of quality assurance experience in manufacturing industry
• Experience in ISO13485

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

EA License No: 19C9682
EA Personnel No: R2198636
EA Personnel Name: Oh Puey Xin

*For Singapore Applicants Only: PC Partner Technology Pte Limited will be prioritising applicants who have a current right to work in Singapore, and do not require PC Partner Technology Pte Limited's sponsorship of a visa.

Position Summary

We are looking for a Test Engineer - Software (AI) who will be responsible for ensuring the quality, reliability and performance of AI-driven software systems through structured test planning, execution and automation. This role works closely with cross-functional teams to validate AI system designs, identify issues early, improve testing efficiency and ensure AI-driven solutions meet project goals through effective technical execution and communication.

Key Responsibilities

Test Design & Coverage

• Design and maintain effective test plans and test cases based on product requirements and system architecture

• Identify critical test scenarios, edge cases and failure modes across functional, integration and performance layers

• Contribute to risk-based testing strategies to ensure optimal test coverage

White-box & Developer Collaboration

• Work closely with developers to understand code design and contribute to unit and white-box testing

• Support developers in improving testability, code coverage and test design

• Review code and test implementations to ensure quality and maintainability

Test Execution & Quality Assurance

• Execute end-to-end testing across APIs, application workflows and embedded systems

• Validate system performance, stability and reliability under different usage scenarios

• Investigate, reproduce and track defects; partner with engineers to drive timely resolution

AI driven Software Solution Validation

• Design test inputs, prompts and datasets to evaluate AI system behaviour.

• Validate the outputs for accuracy, consistency and robustness using defined evaluation criteria.

• Perform regression and scenario-based testing to ensure stable model performance across releases.

Test Automation & Tooling

• Develop and maintain automated test suites for regression and feature validation.

• Contribute to automation frameworks and integrate tests into CI/CD pipelines for continuous validation.

• Build tools or scripts to improve testing efficiency, repeatability and coverage.

Collaboration & Engineering Practices

• Work closely with software and AI engineers to understand system design and provide early quality feedback.

• Contribute to improving test frameworks, coding standards and engineering best practices.

• Produce clear test reports, metrics and insights to support release decisions.
  

Requirements

• Min. Degree in Computer Engineering, Computer Science or a related software engineering field.

• Min. of 2 years of relevant experience in a similar role, with proven hands-on experience in planning, designing and conducting software testing on AI related products.

• Strong understanding of unit testing, white-box testing and code-level validation.

• Proficiency in programming (e.g, Python) with experience writing testable and maintainable code.

• Hands-on experience with test automation frameworks (e.g, Pytest, Selenium or similar).

• Experience testing APIs and backend systems.

• Familiarity with CI/CD pipelines and version control (e.g, Git).

• Basic understanding of AI/ML systems or strong interest in AI testing.

• Strong debugging, analytical thinking and attention to detail.

• Excellent written and spoken English communication skills, fluency in Chinese is a plus for effective interaction with Chinese-speaking stakeholders.

• Candidates must meet legal requirements to work in Singapore without sponsorship.

Job Responsibilities:

• Plan and implement the Abnormal Handling (ABS/PAR/IEAR/BPD) system, assisting the FAB reviewing process abnormalities establishing an early warning notification system, with the aim of reducing quality loss and cost for the company and customers, and supervising the effectiveness of system execution.

• Plan and implement the MRB (Material Review Board), assisting the FAB reviewing waived products resulting from process abnormalities, in order to reduce quality loss and cost for the company and customers, and supervising the effectiveness of the system.

• Plan and implement internal audits, assisting the FAB in identifying processes and systems with quality risks, and supervising the effectiveness of improvements to risk processes.

• Plan and implement the MSA (Measurement System Analysis) system, assisting the FAB in performing calibration and capability assessment of measuring instruments to ensure the reliability of measurement values and thus ensure product quality.

• Implement the automotive service package, assisting the FAB in planning executable methods and systems, and auditing and supervising the execution process for automotive products.

Job Requirements:

• Minimum Bachelor degree in engineering (ex. Electronics, Material science, Chemistry, Physics, Statistics, Data Science, Math)

• Candidates with more than 3 years of semiconductor process/quality/integration experience will be considered for a senior role

• Knowledge of problem solving (8D methodology), statistical techniques, Measurement System Analysis(MSA) and planning/project management is an advantage

• Knowledge of ISO9001/ISO/TS16949 or VDA6.3 standards, Lead Auditor qualification and audit handling/experience is preferred

• Collaborate with cross-functional teams to resolve quality issues and customer requirements to drive product quality improvements

• Good communication and negotiation skills, with the ability to collaborate with FAB module, PEI and Customers

Whether you’re looking for your first role or your next career move, UMC is where your future can take shape.

Step into your future with us. Apply Now.

About United Microelectronics Corporation

United Microelectronics Corporation (UMC) is a leading global semiconductor foundry with over 40 years of innovation powering technologies across AI, automotive, consumer electronics, connectivity, and IoT. As one of the industry’s most established players, we enable breakthrough technologies through precision-engineered semiconductor manufacturing for customers across every major sector of the electronics world.

Headquartered in Taiwan, UMC has been present in Singapore since 2004 and continues to invest in local talent, technology, and advanced manufacturing. Our recent Fab expansion reflects our long-term commitment to building Singapore as a key hub for semiconductor innovation, and to creating stable, meaningful careers through innovation, teamwork, and progress.

Join a team that invests in your future from day one. With best-in-class training, hands-on experience and access to cutting-edge tools, UMC equips you to lead tomorrow’s tech landscape, right down to the nanometre.

Responsible for supporting the design,development, and execution of automated test scripts to ensure softwarequality, while learning industry-standard tools and frameworks under theguidance of senior test engineers. This role is hands-on coding with testingdiscipline, making it ideal for early-career professionals aiming to specializein automation.

Purpose:

To assist in building and maintainingautomated test suites that validate software functionality and reliability. Therole emphasizes learning automation frameworks, scripting, and collaboratingwith developers to improve product quality.

Responsibilities

·      Design and implement automated test cases (new and existing features)

·      Develop and maintain test frameworks in Selenium or Playwright

·      Execute test automation created in Local or Pipeline run

·      Collaborate with Dev and QA team for test automation development

·      Perform exploratory and Regression testing for bug validation and new features

·      Documents test results and defect reporting

·      Contribute to CI/CD pipeline through automation test

·      Maintain and extend test tool and test automation created

Qualifications and skills

·      Bachelor's degree in related fields such IT, or Computer Science

·      Technical skills

o  Basic programing skills especially javascript/typescript

o  Familiarities in Selenium and Playwright

o  Understanding in CI/CD tools (Jenkins,GitHub Actions, Azure DevOps).

·      Soft skills

o  Strong analytical and problem-solving skills

o  Attention to detail specially in Quality

o  Great communication skills and teamwork skills

·      Experience:

o  Internship or 0-2 years’ experience in software testing and automation development

Nice to have:

ISTQB certified Foundation level

ISTQB certified test automation engineer