Micron’s Singapore Process Development (PD) group in Technology Development (TD) is looking for Plasma-CVD / Diffusion PD engineer to support Plasma-CVD/DIFF process development of advanced technology nodes. You will design and optimize Plasma-CVD or Diffusion for Micron’s innovative NAND Flash products.

As a PD Engineer, you will take ideas from conception through process development then implementation in our manufacturing facilities. In addition to your technical responsibilities, you will also run the projects of highly technical nature. This role is essential to the success of Micron’s products and may require business-related travel. Primary areas of responsibility include Plasma-CVD or Thermal Diffusion process and film characterization, optimization, design, troubleshooting, process transfer and fundamental research.

Advanced Thin Films PD Engineer will interact with groups such as Process Integration, Metrology, Surface characterization labs, Electrical Failure Analysis, Yield Enhancement, Manufacturing and Equipment vendors/suppliers, to ensure robust thin film processes that meet the precise physical and electrical requirements for Micron Products.

As an Advanced Thin Films PD Engineer at Micron, you will be required to travel for brief business purposes. This position requires that you have an aptitude for a research and development (R&D) environment, good organizational skills and ability to work independently as well as in a team environment. This position may often require weekend support to R&D Pilot Line, for example, in case of pilot/manufacturing line excursions/downs and monitoring program-critical lots thought various modules as deemed necessary.

Your responsibilities will include, but are not limited to:

• Process Development

• Design and develop and deliver process package to meet product specification requirements as per program targets and timelines

• Characterize the processes using appropriate techniques (SEM, TEM, XPS, SIMS, AFM, etc.)

• Design and execute experiments, analyze data and present it in the appropriate forums.

• R&D Pilot Line in the Fab

• Improve process maturity, capability and sustain processes in the fab under your ownership

• Updating the Fab engineers on customer issues and technology needs.

• Supporting root cause defect and unique fail mode analysis.

• Process Integration

• Delivering advanced technology to meet future product nodes.

• Developing recipes to meet structural & electrical requirements.

• Managing wafers though Thin Film levels in support of special requirements.

• Other Process Areas

• Working in cross-functional teams to jointly develop Array and CMOS structures.

• Supporting cross-functional failure analysis and yield improvement.

• Advanced Thin Film peers

• Maintaining or developing expertise in multiple process, hardware, or technology areas.

• Serving as a resource for peers in recipe & process development.

Successful candidates must have:

• Education requirements

• PhD in Physics, Materials Science, Chemical Engineering, Electrical Engineering, Chemistry, or related fields

• BS/MS+5 years equivalent industry or research experience may substitute for a PhD.

• Understanding in one or more of the following topics Transport phenomena, Electromagnetics, Atomic/Molecular physics, and Surface phenomena.

• Solid troubleshooting, experimental design and data analysis skills.

• Strong computer skills, including MS Office.

• Plasma physics background and understanding of plasma sources used in plasma CVD is highly preferred.

• Understanding of CVD and Diffusion deposition processing principles.

• Rudimentary understanding of process control and Statistical Process Control (SPC).

• An understanding of solid state devices.

• An understanding of semiconductor process.

• Knowledge of advanced data analysis techniques and scripting is highly preferred

• Open to work off shift and weekends if necessary

• Open to domestic and international travel

Experience: 6-9 Years
Role: Process Analyst

Responsibilities:

·         Drive process improvement across Technology Delivery, critically evaluate current Software Development Life Cycle (SDLC) methodologies spanning Agile, traditional Waterfall, and hybrid delivery models to eliminate bottlenecks and reduce administrative overhead.

·         Conduct rigorous assessments of end-to-end technology delivery lifecycles, from architecture and requirements gathering through to CI/CD, testing, and release management.

·         Implement structural changes to streamline delivery workflows and reduce overall time-to-market.

·         Design and manage a comprehensive stakeholder feedback ecosystem.

·         Utilize advanced Microsoft Excel capabilities (e.g. complex arrays, dynamic data modelling, and pivot tables) to quantify qualitative feedback, track operational metrics, and pinpoint root-cause friction within delivery pipelines.

·         Orchestrate and moderate cross-functional alignment sessions encompassing engineering, business, and compliance stakeholders.

·         Drive meticulous agenda design, objective setting, conflict resolution, and consensus on process solutions.

·         Synthesize intricate process mechanics, risk controls, and performance metrics into polished Microsoft PowerPoint presentations.

·         Deliver executive-grade narratives to secure strategic buy-in from senior leadership and technology steering committees.

·         Champion Lean IT and Six Sigma principles to systematically identify and eliminate waste across all software engineering workflows.

·         Ensure all optimized frameworks align strictly with Technology Risk Management (TRM) guidelines and internal audit requirements.

Requirements:

Education:

·         6-8 years of proven track record in technology process improvement, IT governance, or technology transformation within the financial services sector or complex corporate environments.

·         Around 10-12 years of total work experience.

• Prior tenure at a top-tier management or technology consulting firm is considered a significant advantage.

Essential:

·         Deep, practical understanding of enterprise-scale software engineering and SDLC mechanics.

·         Proven capability in managing the complexities of diverse delivery ecosystems, particularly the integration of modern Agile practices within heavily regulated environments.

·         Demonstrated application of Lean Process Management and Six Sigma frameworks.

·         Advanced interpersonal acumen with a demonstrated ability to navigate highly matrixed organizational structures, manage resistance to operational change constructively, and influence outcomes without direct authority.

·         Exceptional capability in leading high-stakes workshops, ensuring rigorous logistical preparation, active moderation, and the delivery of definitive, actionable outcomes.

·         Expert-level proficiency in leveraging data analysis to inform operational strategy.

• Ability to construct sophisticated executive communications that drive decision-making at the highest levels of the organization.

Key Skills:
·        SDLC ProcessImprovement (Agile / Waterfall / Hybrid)

·        Lean Process Management/ Six Sigma / Value Stream Mapping

Advanced Microsoft Excel and Microsoft PowerPoint

As part of the Process Engineering group, this position involves contributing to the development of thin film solutions for thermal management product.

The role also involves establishing and optimizing related process parameters related to dicing, mask design, plating/sputtering thin films.

Also work closely with internal cross-functional teams, external vendors and technology partners on application development from concept prototype phase to production introduction.

Roles & Responsibilities

• Develop processes to deposit conductive (metal) films by Plating, PVD Sputtering and Vacuum Evaporation.
• Develop film characterization techniques for metrology and inspection.
• Provide day-to-day operations of deposition tools - tool and process monitoring, post PM process qualification, troubleshooting.
• Prepare project updates and goals.
• Work closely with integration and test teams on developing critical to quality (CTQ)metrics, root cause analysis (RCA) and corrective actions for yield improvements.
• Work closely with equipment engineers and external suppliers on tool improvements and selection of new equipment.

Requirements

• ITE/Polytechnic/Degree in Materials Engineering or related field
• Min. 2 years of experience leading manufacturing process development in at least one of the following fields: semiconductor front or back end such as wafer bumping, dicing, mask design, plating and thin film process development.
• Experience of using UHV vacuum manufacturing equipment and associated sensors and components (Pumps, valves, pressure sensors, spectrometers, MFC's, pressure controllers, pyrometers, etc.)
• Experience working on material development and process engineering.
• Experience in statistical analysis methods and tools, design of experiment.
• Understanding of materials characterization and FA techniques
• Good communication and teamwork skills.
• Willing to work in Tuas South area.

Benefits

• Company transport will be provided at mrt.
• Transport allowance will be given.
• Additional company holidays shutdown per year will be given.
• Other staff welfare benefits.

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type

• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement Prioritize within Singapore based manufacturing Wet Etch team on the key technology issues that need TD breakthroughs.

• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement Participate with Boise TD peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements

• Identify disruptive processes early on and work with manufacturing and Boise TD to identify viable path forward

• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.

• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions

• Identify process simplification opportunities and drive cross functional teams in implementation Incorporate best known manufacturing methods into early development phase of upcoming nodes.

• Design and implement advanced process monitoring and control methodologies.

• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.

• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings

• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.

• This position requires communications and collaboration with partners both locally and globally. 

• Strict adherence to Micron Intellectual Property protection policy is a must.

• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• Bachelors/Masters/PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Chemistry and related

• A deep understanding of chemistry, chemical kinetics, thermodynamics and  mass transport

• Opportunity to travel overseas for an extended period of time for collaborative R&D work assignment.

• 2-3 years of experience in Semiconductor Equipment/Process development is preferable

• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.

• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data

• Working knowledge of Design of Experiments (DoE)

• Proven ability to collaborate with local and overseas teams on projects

• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.

• Ability to be a self-motivated individual and be adaptable

• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously

• Display Micron Value of People. Innovation, Tenacity, Collaboration and Customer Focus

Job Responsibilities

• Build a solid understanding of B2B processes across SMBs, large corporations, and educational institutions.
• Document current and future state processes, capturing regional nuances with precision.
• Participate in stakeholder workshops, gathering and recording business requirements.
• Produce analytical deliverables — including process maps, gap analyses, and requirement
• documents to support program activities.
• Assist with data readiness for system rollout, including preparation and validation of migration data.
• Execute user acceptance testing (UAT), track issues, and drive resolution to ensure system readiness for local requirements.
• Support change management and training activities, including preparing training materials and reference content for future state processes.
• Keep your manager informed on progress, escalating blockers and risks.

Skills required

• Exposure to a B2B selling environment; experience in consumer electronics is a plus.
• Background in a business analyst or process-oriented role, with some exposure to CRM or enterprise systems; familiarity with Salesforce is a plus.
• Experience contributing to business requirement documents.
• Ability to work independently while proactively seeking guidance when needed.
• Collaborative and adaptable working style with a willingness to learn..
• Clear written and verbal communication skills, with an ability to tailor outputs to different audiences.
• Background or interest in AI solutions.

Education & Experience

• BS or equivalent degree in a discipline related to the role, with 4–6 years of relevant experience.

Company Overview

• Established in 1998, Perfect Team Engineering Pte Ltd provides machining services to major O&G OEMs, delivering quality and innovative solutions while upholding high safety and ethical standards. The company is ISO 9001: 2008 and WSH bizSAFE level 3 certified.

Job Summary

You will lead production planning and coordination to ensure timely manufacturing and shipment delivery, optimizing resources and collaborating across departments to meet customer requirements and key performance metrics.

Responsibilities

• Plan and coordinate all manufacturing activities to meet production schedules and customer delivery requirements
• Develop daily material and production plans based on customer orders to ensure smooth workflow
• Release work orders and monitor production order progress to achieve on-time shipment delivery
• Optimize loading capacity and track production movements to maximize operational efficiency
• Collaborate closely with manufacturing, purchasing, and warehouse/logistics teams to ensure timely receipt of parts supporting shipment plans
• Monitor material shortages and expedite procurement to maintain material availability for production plans
• Assist in maintaining, developing, and improving existing production and planning processes for continuous improvement
• Maintain and ensure achievement of key performance metrics related to production planning and delivery

Required competencies and certifications

• Diploma in the Engineering discipline
• Minimum 3 years of experience in production planning
• Knowledge of supply chain and material flow concepts
• Proficiency in Microsoft Excel, Word, and Outlook
• Experience with ERP systems such as SAP is highly desirable
• Strong interpersonal and communication skills
• Ability to work effectively under pressure with a sense of urgency
• Demonstrated teamwork and self-driven work ethic

Preferred competencies and qualifications

• Experience using ERP systems such as SAP (not mandatory but highly desirable)

ROLES & RESPONSIBILITIES

• day-to-day operating process and maintain daily operation.
• Monitor and maintain process quality according to company standards.
• Ensure that the workplace is properly maintained and clean.
• Maintain a positive and professional approach with customers.
• Resolving of conflicts in a professional way.

REQUIREMENTS

• Minimum 3 years relevant experience
• Good team management skill
• Strong analytical, problem-solving & decision-making skills
• Must hardworking and responsibility.

PROCESS ENGINEER | EAST | PERMANENT | BASIC UP TO $5,000

Salary Package
Basic Salary: $3,500 – $5,000
Allowance:Fix $335 + 168 or 336 Shift

Benefits
Permanent role
AWS & VB, minimum 1.3 months up to 3 months
Big stable company
Yearly increment
Annual leave 14 days, up to 16 days

Location
Tampines, near IKEA
Direct bus from Punggol, Sengkang, Hougang, Bedok, Tampines, Pasir Ris MRT

Working Hours
Monday to Friday
8:30am – 5:30pm

Job Responsibilities

• Lead and guide process engineers and technicians in daily production activities
• Support smooth and efficient production operations
• Work with internal teams to improve process flow and work procedures
• Check and update work instructions, process documents, and Bill of Materials (BOM)
• Use SAP system to update and track production / engineering records
• Follow up on engineering change requests and process changes
• Monitor production issues and support root cause analysis for process problems
• Assist in troubleshooting and recommend improvement actions
• Manage and update engineering change records and tracking list
• Provide training to production teams on work instructions
• Support new product introduction and mass production activities
• Join ISO and quality compliance activities

Requirements
• Higher Nitec / Diploma / Degree in relevant field
• 1–3 years of relevant experience
• Process engineering experience in manufacturing environment preferred
• Knowledge in SAP system, Bill of Materials, and root cause analysis

Applicants who possess relevant experience for the aboveresponsibilities are most welcome to apply. If you do not possess the aboveexperience, your application will still be considered on individual merits andyou may be contacted for other opportunities.

Please submit your updated resume in MS Wordsformat by using the APPLY NOW BUTTON.

Bysubmitting your personal data and/or resume, you give consent to collection,use and disclosure of your personal data and/or resume by the company (or itsagent) for the purpose of the processing and administration by the companyrelating to this job application.

https://www.mci.com.sg/wp-content/uploads/2025/09/MCI-Job-Applicant-Data-Protection-Notice.pdf

**We regret to inform that only shortlisted candidates would benotified.

KOH SHEN PENG
RegistrationNumber: R26161546
EALicence No: 06C2859 (MCI Career Services Pte Ltd)

Responsibilities

• Own and upgrade our engineering governance, operational rules, and safety protocols across all company facilities.

• Lead our Process Safety Management (PSM) initiatives (HAZOP, HAZID, LOPA, and incident investigations) ensuring everything complies with local regulations and global industry codes.

• Oversee asset integrity and maintenance strategies to maximize plant uptime, operational discipline, and overall performance.

• Act as the main technical authority for process, mechanical, electrical, and risk management disciplines.

• Provide technical guidance as we transition our operations from pilot phases toward full commercial deployment.

• Work closely with the CEO and senior management, keeping them informed on technical risks, operational readiness, and strategic engineering upgrades.

Requirements

Education: A Bachelor’s degree in Chemical, Mechanical, or Process Engineering (advanced degrees or professional certifications are a big plus).

Experience: At least 10 years of engineering leadership in high-hazard environments like petrochemicals, refining, gas processing, or LNG.

Energy Transition Knowledge: Experience with hydrogen, syngas, biomass, or renewable fuels is highly advantageous.

Technical Expertise: Deep, practical knowledge of process safety management and standard industry codes (like API, ASME, NFPA, and ISO).

If you are interested in the position , kindly send your Resumes in to jasper.soh(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving your current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R25154228

Special Process (Thermal Spray)

We are part of a leading aerospace and industrial engineering environment specialising in advanced component repair and surface engineering solutions. Our focus is on high-precision thermal spray technologies used in gas turbine and aero-derivative engine maintenance.

• S$3,500 + AWS (1 month) + Variable Bonus (up to 2.5 months)

• Transport provided for convenience

• Attractive night shift allowance of $14 per night

• Annual Flexible Benefits of $500

• Pioneer, Singapore

• Rotating shift (every 2 weeks):

  • 7:30AM – 7:30PM (Day Shift)

  • 7:30PM – 7:30AM (Night Shift)

• Work pattern: 4 days on, 2 days off

Job Responsibilities

As a Special Process (Thermal Spray) Technician, you will be responsible for performing precision coating and surface treatment processes for high-performance engine components.

Your responsibilities include:

• Performing thermal spray and/or GEL coating for gas turbine and aero-derivative engine repair

• Carrying out blasting, polishing, heat treatment, and other related surface preparation processes

• Following work instructions to ensure accurate and consistent task execution

• Maintaining product quality, equipment care, and production output targets

• Ensuring proper housekeeping and adherence to production schedules

• Complying strictly with all EHS (Environmental, Health & Safety) regulations

• Reporting any unsafe conditions or practices immediately

• Supporting other duties as assigned

Requirements

• 3 years of relevant working experience

• Able and willing to work rotating shifts (day and night)

• Ability to follow structured work instructions and production processes

Key Responsibilities:

• Lead the development, implementation, and maintenance of Process Safety Management (PSM), Energy, and GHG systems in alignment with regulatory and internal standards.
• Facilitate and monitor HAZOP and risk assessments; track implementation of recommendations to closure.
• Drive improvements in Process Hazard Analysis, Pre-Startup Safety Review, and Management of Change processes.
• Investigate process safety incidents, recommend preventive actions, and identify relevant safety performance metrics.
• Oversee planning, budgeting, and execution of activities related to PSM and energy management.
• Collaborate with process engineers to ensure adequacy of LOPA and other risk mitigation strategies.
• Organize and support internal and external audits (e.g. SS651, IMS, EnMS, insurance) and ensure compliance.
• Maintain documentation and reporting of HSSE data; act as caretaker for the Asset Management System.
• Support Energy Manager / GHG Manager regulatory roles
• Serve as a Subject Matter Expert in process safety—providing consultation, training, and coaching across departments.
• Promote a strong process safety culture and share best practices across teams and with global stakeholders.
• Track actions related to safety projects and ensure timely reporting and follow-ups.
• Take ownership as IMS Process Owner

Requirements:

• Degree in Chemical / Mechanical / Process Engineering
• Min. 8 years of experience in a chemical / petrochemical / Shipyard / Energy high-hazard industrial environments
• Strong understanding of risk management, local HSE regulations (e.g. WSHA, WICA), and standards such as SS506.
• Proficiency in process safety design and risk screening is advantageous.
• Comfortable to work in west of Singapore (Tuas / Pioneer / Gul Circle) 

If you are interested in the position

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Job Description:

• Responsible for New Product Introduction (NPI) reviewing of drawings and specifications provided by Customer
• Raise Supplier Problem Sheet (SPS) for any issue observe at the review for customer clarification and disposition for NPI parts
• Generate internal drawing for those part with incomplete details
• Generate 3D drawing for drawings with not clear and hidden dimensional information
• Create drawing for those parts need fixture for production
• Create Bill of Materials (BOM) and Routing for job travelers
• Responsible in decision making on which site location the part will be manufactured.
•  In-charge on which Vendor the part will be sub-out for some special processes as call out on drawing
• Provide Part Technical Information Sheet (PTIS) for Vendor on those parts for sub out process.
• Analyze and discuss with Finance on the part costing for new products
• Responsible for giving go signal to Planning for releasing the job order
• Update NPI parts tracking and  Process Development Sheet
• Review Engineering Change Order(ECO) and Engineering Specs Waiver (ESW) for any change on current / existing part and for implementation of changes
• Submit Supplier Problem Sheet(SPS) for issues encounter at production for existing parts related to drawing and specifications.
• Constant monitoring of SPS issue to close it with customer
• Download DMM BOM from Agile and compare with SAP material master before uploading to SAP
• Assist in all DMM BOM related issue
• Assist Technical advice related to IMT welding and fixture generation
• Provide assistance to Purchasing for any material or OEM buying parts related
• Provide technical knowledge to UMS Penang Engineering and Production related issues
• Assist Quality team on the analysis on quality issue related to First Article Inspection (FAI) submission, generation of Failure Mode Effects and Analysis (FMEA), customer 8D, Failure Analysis of Discrepant Material Report (DMR), Part Qualification Process (PQP).
• Prepare ISO 9001 and SSQA documentation for Engineering
• Closely working with Customer Service (CS) for Request for Quote (RFQ) for new project and secondary process and customer rework parts.
• Work with Customer for any design improvements

Additional Information

• Experience using CAD software such as SolidWorks, AutoCAD, or Autodesk Inventor
• ERP knowledge’s Vantage and Epicor, ex...
• Familiar with ISO norms and standards and with conventional drafting stations.
• Familiar with ASTM spec, ASME Y14.5M-1994 & ASME Y14.38-1999 and GD&T specification.
• Knowledgeable in DOS, MS Office software such as Word processing, Excel spreadsheets, PowerPoint presentation and other software related to drawings and management system.
• Familiar with all the special process ex. Anodize, EN-plating…
• Familiar with material types and purpose. 
• Familiar with welding AWS (clean room and non-clean room).
• Familiar with tubing, fittings and other OEM parts.
• Knowledge of semiconductor and equipment assembly process.
• Familiar with technical issues solving on the assemble parts.
• Familiar the semiconductors components process.
• Familiar the process improvement.
• Familiar the helium leak, hydrostatic leak test and load test.
• Familiar the OEM components specs.
• Writing skills for preparing manuals, parts lists, proposals and design documentation
• Time-management skills for meeting deadlines

- Required to be able to communicate in English

- dedicated to work and working on construction site

- supervising, planning and submission of works related matter

- is good to have driving license

- with related work experience

- able to liaise and communicate with foreign workers

- required to work OT when it is necessary

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

We are seeking a dedicated and hardworking Assistant Engineer (Mechanical) to join our team.

• Assist in the installation, maintenance, troubleshooting, and repair of mechanical systems and equipment.
• Support engineers in planning, executing, and monitoring mechanical engineering projects.
• Conduct routine inspections and preventive maintenance activities.
• Prepare technical reports, maintenance records, and project documentation.
• Coordinate with contractors, suppliers, and internal departments to ensure smooth project execution.
• Ensure compliance with safety regulations, company policies, and quality standards.
• Assist in identifying and resolving mechanical issues to minimize equipment downtime.
• Perform other duties assigned by the Engineering Manager or Supervisor.
• Assist in mechanical engineering projects, maintenance, and operations.
• Support troubleshooting, inspection, and repair of mechanical equipment.
• Prepare technical reports and documentation.
• Coordinate with supervisors, technicians, and contractors to ensure work is completed safely and efficiently.
• Follow company procedures, safety regulations, and quality standards.
• Perform other engineering-related duties as assigned.

Requirements:-

• Diploma or Degree in Mechanical Engineering or a related field.
• Basic knowledge of mechanical systems and maintenance practices.
• Good problem-solving and communication skills.
• Proficient in Microsoft Office and engineering software is an advantage.
• Responsible, disciplined, and able to work independently as well as in a team.
• Must be hardworking, committed, and willing to work overtime and on weekends when required.
• Able to work independently and as part of a team.
• Responsible, hardworking, and willing to learn.
• Physically fit and able to work in a fast-paced environment.
• Willing to work overtime, weekends, and public holidays when required.

• Assist in preparation and submission of engineering design and documents by following construction plan and drawings Oversee construction activities, progress, planning and implementation according to project timeline.
• Monitor and adhere to work schedule, work progress and project costing
• make recommendation for effective project management Monitor materials delivery and usage
• Working together with the safety team to ensure overall site safety
• To assist the project engineer, general contractors and the rest of the team for the execution of contracts progress
• To coordinate with clients, consultants, subcontractors to ensure timely delivery of work schedule
• To assist Project Engineer on all other project administrative matters.
• Proficient in Rebar casting and Steel Structures Make sure projects meet authorities requirements.
• Prepare day to day report on work progress and update the management
• Job Requirements:
• Possess at least Diploma / Degree in Civil, Electrical, Mechanical Engineering or equivalent
• Preferable with minimum 2 years of working experience in construction industry.
• Possess relevant safety certificates
• Ability to work independently and under pressure to meet tight project schedules.
• Willing to travel & based at the project site if necessary Able to work long hours, night works, overtime and Sunday work if required

• Job Description & Requirements
• Assist in preparation and submission of engineering design and documents by following construction plan and drawings Oversee construction activities, progress, planning and implementation according to project timeline.
• Monitor and adhere to work schedule, work progress and project costing
• make recommendation for effective project management Monitor materials delivery and usage
• Working together with the safety team to ensure overall site safety
• To assist the project engineer, general contractors and the rest of the team for the execution of contracts progress
• To coordinate with clients, consultants, subcontractors to ensure timely delivery of work schedule
• To assist Project Engineer on all other project administrative matters.
• Proficient in Rebar casting and Steel Structures Make sure projects meet authorities requirements.
• Prepare day to day report on work progress and update the management
• Job Requirements:
• Possess at least Diploma / Degree in Civil, Electrical, Mechanical Engineering or equivalent
• Preferable with minimum 2 years of working experience in construction industry.
• Possess relevant safety certificates
• Ability to work independently and under pressure to meet tight project schedules.
• Willing to travel & based at the project site if necessary Able to work long hours, night works, overtime and Sunday work if required

·        Coordination with own team to support whenarising issues on site.

·        To Assist with project Manager formeeting, schedule, and progress report

·         Conduct regular meetings with clients toensure clarification and meet specific requirements in a timely manner.

·        Delegate tasks to team members accordingto their individual skill sets, experience, and abilities to ensure efficientcompletion of the project.

·        Maintain budgets and adjust according toneeds as they arise.

·        Track performance and analyse thecompletion of key goals.

·        Document and report project progress tostakeholders and clients.

·        Problem solving skills with for to managethe pressurised situations.

·        To have a Driving license is additionalsupport for the job needs.

·        Coordination and good communication withour own team for project support and sharing experience.

Responsibilities

• Ensure all site activities are carried out in full compliance with client requirements, approved drawings, relevant building codes, and statutory regulations.

• Review construction drawings, specifications, and contract documents to ensure alignment with project requirements and regulatory standards.

• Provide overall supervision of contractors, ensuring strict adherence to approved method statements, safe work procedures, and quality standards.

• Verify that all works are executed in accordance with the Consultant’s instructions and approved submissions.

• Identify, report, and document any discrepancies, non-conformities, or potential risks, and recommend practical and timely solutions to mitigate delays.

• Conduct regular site inspections to monitor workmanship quality, identify defects, and ensure prompt implementation of corrective actions.

• Inspect materials delivered to site to confirm compliance with approved material submissions, specifications, and samples.

• Witness and oversee testing of materials (e.g., concrete, reinforcement steel, and finishes) to ensure compliance with project quality requirements.

• Monitor inspection, testing, and commissioning activities to ensure alignment with design intent and contract specifications.

• Maintain comprehensive and accurate site records, including daily reports, inspection checklists, and non-conformance reports.

• Ensure proper documentation and updating of as-built drawings, incorporating all approved changes.

• Prepare periodic progress reports detailing work status, delays, quality issues, and safety matters for submission to the Project QP/Consultant.

• Evaluate and verify contractors’ progress claims, including completed works and materials on-site, prior to recommending certification.

• Monitor project schedules, identify potential delays, and propose mitigation measures to ensure timely project completion.

• Act as the key liaison between contractors, consultants, and clients to facilitate effective communication and coordination.

• Promptly report all quality concerns, safety issues, and progress challenges to the Project QP or Consultant team.

Requirements

• Degree in Civil or Structural Engineering from a recognized university, with accreditation as a Registered Resident Engineer with the Institution of Engineers Singapore (IES).

• Minimum 5 years of relevant experience as a Resident Engineer, with proven exposure to private high-rise developments, industrial facilities (e.g., factories), HDB projects, and infrastructure works under CAG and LTA.

• Thorough knowledge of the Building Control Act, relevant regulations, and standard forms of contract.

• Demonstrated capability in contract administration, including maintaining proper site documentation and compliance with statutory reporting requirements.

• Strong leadership, coordination, and problem-solving skills, with the ability to manage multiple stakeholders effectively.

• Excellent interpersonal and communication skills, with a collaborative approach to working with clients, consultants, and contractors.

• Reports to the Construction Manager
• Manage and oversee construction activities near existing SPPG tunnel/GTP/PUB
• Coordination between client, consultant and sub-contractor(vendors)
• Ensure compliance with safety procedure and regulations
• Good interpersonal skills
• Carry-out regular inspections and regular checks of concerned construction activities
• Able to handle technical and engineering issue
• Ensure the activities comply with the quality, environment, health & safety requirements
• Ensure proper documentation and record-keeping of construction activities

Job Requirements

• Degree in Civil Engineering recognized by Singapore PE Board
• Registered Resident Engineer with IES/BCA with valid certification in Singapore
• Minimum of 5 years of Engineering experience with Degree in Civil Engineering recognized by the PE Board
• At least 3 years of experience in the construction and supervision for vehicular structures and road projects Progress oriented, team player
• Technical expertise and knowledge in Civil Engineering Construction especially in Piling/ RC Works Proficient in Microsoft Office and Auto CAD
• CSCPM/BCSS/Confined space/Work At Height
• Self-motivated and Good Leadership

Job Description:

• Review the project quality plans and inspection test plans according to project specifications and quality requirements.

• Monitor and report on operational procedures that affect quality performance and recommend improvements to the project quality system.

• Liaise with suppliers/vendors on quality control issues.

• Review welding procedure specification and welder qualification tests.

• Prepares quality control procedures and repairs procedures for welding.

• Review stage wise inspections like material/fit up/visual/bolt tightening/painting for fabrication and erection works.

• Review and witness the non-destructive testing like ultrasonic testing and magnetic particle testing.

• To ensure internal quality controls are in place and being maintained properly.

• Work closely with other project personnel such as production and site management team in order to deliver high quality work together.

• Responsible for the compliance with safety & occupational health practices to be implemented at the QAQC Section.

• Proper QA/QC documentation for all materials delivered to the factory, including certificates, calibration, test results, inspection requests, non-compliance reports and site instructions/observations, permanent materials delivered and other QA/QC documents.

  Job Requirements:

  • Bachelor’s degree in Mechanical Engineering or equivalent.

  • Any one of Welding Inspector (CWI, Certified by American Welding Society, AWS QC-1), or CSWIP 3.1 –TWI Certificate is required.

  • Familiar with local/international code and standard for welding procedures & specification.

  • Minimum 5 years of QA/QC inspection experience, preferably in the construction industry

  • Strong organizational, interpersonal, and leadership skills.

  • Ability to lead QAQC team and provide supervision to all QAQC staff.

· Review Contract Docuements

· Make MTO, BOQ

· Study drawings, specifications

· Interface with Client and Make a Progress Claim

· Manage site activities, site workers, subcontractors, main contractors

· (For Electrical Engineer) Knowledge in Power Distribution System, Lighting System, Earth & Lightening System, PV System, UPS/EPS, Telephone distribution.

· Experience for brand submission and technical discussion with authority, design consultant

· Deep knowledge in scheduling, planning, resource control and installation

· Capability in controlling of changes, variations and their costs.

· Monitor and review information from materials, events, or the environment, to detect or assess problems.

· Handling complaints, settling disputes, and resolving grievances and conflicts, or otherwise negotiating with others.

· Identify problems and reviewing related information to develop and evaluate options and implement solutions.

· Using logic and reasoning to identify the strengths & weaknesses of alternative solutions, conclusions or approaches to problems

Requirements

· Candidate must possess at least Diploma/Degree in Engineering (Mechanical, Electrical, Electronic) or equivalent.

· At least 2 Year(s) of working experience in the related field is required for this position.

· Required Skill(s): Accountability, Take ownership of task, Strong mindset, Communication skill

LEE TECH ENGINEERING PTE LTD
We are a well-established construction company. In line with our expansion plans, we invite suitably qualified individuals to fill the following position:

PROJECT ENGINEER

Responsibilities:

• Handle documentary work for tenders, progress reports, handover documents, and as-built drawings.
• Monitor project progress and compare it with the project schedule.
• Respond to customer complaints and feedback.
• Troubleshoot air-conditioning system issues.
• Prepare, schedule, coordinate, and monitor assigned engineering projects.
• Ensure compliance with applicable codes, practices, QA/QC policies, performance standards, and specifications.
• Communicate with clients to understand their needs and represent them in the field.
• Assign responsibilities and mentor the project team.
• Cooperate and communicate effectively with the project manager and other participants to provide assistance and technical support.
• Independently motivated, able to review engineering deliverables, and take corrective actions as needed.

Requirements:

• Minimum relevant certificate in Mechanical Engineering.
• At least 2-3 years of related working experience is preferred.
• Open to candidates of all experience levels.
• Proficient in MS Project and AutoCAD.
• Strong communication skills.
• Outgoing, willing to work extra hours, and possess a positive working attitude.
• Able to work independently and multi-task in a fast-paced environment.
• Candidates who can start immediately or with short notice are preferred.

Interested candidates, please email your resume to leetech@leetech.com.sg.

Other Information

- Location: Island Wide

- Salary Range : $3,000 - $4,500