Total 268 Others job vacancies

·      Perform a full range of hair services and treatments, including styling, colouring, highlighting, and professional hair/scalp treatments with head/neck and shoulder massage.

·      Assist and work with Director Stylist.

·      Provide professional consultation and recommendations tailored to each client’s needs.

·      Build and maintain strong client relationships to increase client retention, including proactive pre-booking of appointments.

·      Actively develop new clientele and contribute to business growth.

·      Adhere strictly to salon policies and standard operating procedures to ensure smooth daily operations.

·      Candidates with an existing client base will be an advantage.

·      Maintain a clean, safe, and well-organized workstation at all times.

·      Ensure all hair tools and equipment are properly cleaned and sterilized after use.

·      Skills or experience as a scalp therapist will be a strong advantage.

Working hours: 10.00am – 7.00pm on weekdays and weekends, according to the Monthly Duty Roster.

Entitled to 6 off days per calendar month. Annual, Medical and Hospitalization Leave provided.

Basic monthly salary plus tiered commission scheme.

Salary is subject to CPF contributions in accordance with regulations.

No quota for foreigners. Only for PR or Singaporean applicants.

• Commissioning and modification of electronic control systems for cranes and other equipment;
• Crane after-sales service to assist customers in solving PLC and drive problems;
• Complete the circuit connection of the components according to the electrical schematic diagram and assist the engineer to test;
• Provide technical services to customers in Southeast Asian countries.

The PFA & EFA Technician will provide comprehensive Electrical Failure Analysis (EFA) and Physical Failure Analysis (PFA) support for products across NPI, qualifications and high-volume manufacturing (HVM).  

A key part of this role is the disposition of maverick material triggered by the Statistical Bin Limit (SBL) system—using data-driven evaluation, structured troubleshooting, and effective collaboration with cross-functional partners. You will collaborate closely with key stakeholders to identify failure signatures, determine root cause and failure mechanisms, recommend lot disposition, and partake on continuous improvement to reduce and improve SBL fail rates. 

This position requires keen technical curiosity, disciplined execution, clear communication, and strict adherence to lab safety and quality systems in a fast-paced production environment. 

Key Responsibilities 

1) Maverick Lot Disposition via SBL System & Deviation Management 

• Extract, interpret, and analyze test data to support SBL-triggered investigations. 

• Execute and follow up on FA actions (EFA and/or PFA) to determine disposition paths. 

• Recommend and communicate lot dispositions clearly and timely to stakeholders for quality control. 

• Maintain strong working knowledge of test processes, equipment, systems, and product behavior to enable accurate decision-making. 

• Document deviations and observations and provide feedback through the appropriate quality management system, ensuring traceability and compliance. 

2) Electrical Failure Analysis (EFA) 

• Develop and maintain strong EFA skills across product technologies to identify root cause and understand failure mechanisms. 

• Utilize advanced FA tools such as an IV curve tracer, micro-prober, and bench tester to perform EFA. 

• Support site EFA activities including failure confirmation, characterization, and electrical failure data correlation studies. 

• Provide EFA support and PFA recommendations for assembly failure cases and other escalations. 

3) Physical Failure Analysis (PFA) 

• Conduct physical failure analysis and correlate electrical failure modes to physical defects when needed. 

• Perform package and sample preparation activities such as:  

• Package de-processing. 

• Cross-sectioning support (manual and/or tool-assisted) 

• IMC measurement (where applicable) 

• Utilize layout and failure localization information to correlate suspected defect locations. 

• Operate FA lab tools such as Ion Miller, FIB, EDX, SEM, 2D/3D X-ray, Thermal EMMI, and other laboratory equipment. 

• Capture, save, and organize images and data; write structured, detailed FA documentation and reports with clear conclusions and supporting evidence. 

• Coordinate with vendors for tool maintenance, upgrades, and service support; support general tool upkeep and lab readiness. 

4) Continuous Improvement & Productivity 

• Propose and implement engineering and technical improvement ideas to reduce SBL triggers and optimize SBL disposition efficiency for EFA/PFA workflows. 

• Assist engineers with initiatives to improve FA efficiency, effectiveness, and consistency (methods, tooling, templates, checklists, and standard work). 

• Support labor productivity projects that improve throughput, reduce rework, and enhance reporting quality. 

• Contribute to technical projects and, where applicable, support technical paper creation and knowledge sharing. 

Qualifications 

• Nitec / Higher Nitec / Diploma in Electrical & Electronics Engineering, Computer Engineering, or a related discipline. 

• Experience in test failure analysis, a lab environment, or manufacturing troubleshooting is a strong advantage. 

• Enthusiastic working with data, diagnostic tools, and structured problem-solving methods. Able to work effectively in cross-functional teams and communicate clearly in a production environment. 

• Required to work 12-hour rotating shifts. 

Preferred Skills 

• Proficiency in FA tools and techniques (FIB, SEM, CSAM, Emmi, Oscilloscope, I-V Curve Tracer, ATE). 
  

  Responsible for performing electrical, mechanical or software troubleshooting to determine problems in non-functioning test equipment. Dismantles, adjusts, repairs and assembles equipment according to layout plans, blueprints, operating or repair manuals, and/or rough sketches or drawings. Uses test and diagnostic equipment to perform checkouts. May perform equipment modifications as directed by test/manufacturing engineers.

Responsibilities:

• Perform Servicing and Maintenance to Fire Protection Systems.
• Installation and Troubleshooting of Fire Protection Systems.
• Need to travel and work at various parts of singapore (island wide).
• Able to converse with clients and issue service report upon job done.
• Attendance to Emergency Calls.
• Applicants without any experience are welcome as training will be provided.
• Work 5.5 days

Requirements:

• Candidate must possess at least a Higher secondary/Pre-U/A level/Vocational Trade,Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Engineering (Electrical/Electronic), Engineering (Industrial), Engineering (Mechanical), Engineering (Environmental/Health/Safety) or equivalent.
• Required skill(s): able to work as a team and some knowledge in Electronic and Electrical field (advantage)
• Full-Time position
• Possess of Driving License will be an added Advantage and additional benefits upon confirmation.
• Singaporean/PR to apply only

Responsibilities:

• To assist in preparation of BIM model and content for BIM coordination meetings
• Adhere to BIM execution plan and project workflow criteria under the direction of Architect in-charge
• Support project team and efficiency in workflow to achieve BIM deliverables as per requirements timely
• Leveraging BIM software and tools as a methodology to coordinate design documentation
• Assist in updating BIM standard and template for project
• Familiar with BIM submission, regulations and guidelines

Requirements:

• Specialist Diploma in BIM/VDC preferred
• Minimum 2 years relevant working experience in building contruction (Architecture), Singapore
• Knowledge of authorities' requirements and overall project process
• 5 days work week, Mondays to Fridays
• Location: Bugis, Singapore

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Duty technician for the Semicon Manufacturer Facility system

1. Diploma in Electrical or Mechanical

2. There are two shift, day shift (8:30AM to 8:30PM), night shift (8:30PM to 8:30AM)

working two days and rest two days

3. We will provide on site training

4. Good communication, interpersonal skills and responsibility

Operate CNC machine/s to perform tasks.

Understand specifications of the task at hand and the desired result.

Prepare and load raw materials and parts onto the machines.

Prepare a test run to check if the machines produce outputs according to specifications.

Set machines to complete full cycles to fabricate large number of parts.

Ensure manufacturing and safety procedures are being followed.

Supervise the machines while they execute the tasks and make any necessary adjustments to produce a better result.

Inspect and measure finished products and compare them with requirements to determine if the process has been completed properly.

Check and maintain and upkeep machinery daily to ensure functionality.

Willingness to work night shift and split shift.

Willingness to work extra hours or weekend if needed.

The Advanced Materials Technology Centre (AMTC) is looking to hire a Lab Assistant to join the team. The Lab Assistant will play a hands-on role in supporting the team’s researchers in their experiments.

Roles and responsibilities:

• Support daily lab operations, ensuring the laboratory is well-maintained and ready for use at all times.
• Assist Scientists and Researchers in conducting experiments and calibrating instruments with precision and care.
• Guide and mentor students undertaking industry project work, helping them apply classroom knowledge to real-world challenges.
• Contribute to marketing content creation, translating lab work and developed technologies into engaging content that showcases AMTC's capabilities.

Requirements:

• Diploma Holder, preferably with a background in Sciences
• Proficient with Microsoft Office tools
• Prior lab experience is a plus, but not required 

Salary will commensurate with relevant experience.

If you are shortlisted for the position, you should hear from us within 30 days of the closing date of this advertisement.

Successful candidates will be offered a contract until 30 November 2026.

Job Description:

• Perform chemical analysis pertaining to product release, project and validation related testing.
• Ensure that all tests are performed in accordance with written procedures.
• Appointed as a trainer on identified subject matter expert. Train new Lab staff.
• Assessment of training effectiveness for new Lab Junior Technicians / Technicians.
• Supervise junior technicians / technicians during testing and that will also include equipment troubleshooting, equipment failure handling and investigation.
• Support Lab consumables purchase, inventory and control expenditure.
• Assist in investigating chemical analysis failure investigation. (not pertaining to Singapore site).
• Conduct or review internal calibration and maintain calibration master list.
• Verify tagging status and certificate of analysis for product release.
• Verification test results obtained by QA Lab Junior Technician / QA Lab Technician.
• Troubleshooting when equipment breakdown or malfunction.
• Ensure and verify chemical mixing process is performed in accordance with written procedures.
• Support routine in-house test requests: Chemical Extraction test if required.
• Any other tasks assigned by superior if required.

Job Requirement:

• Minimum Diploma in Chemical Process Technology or in a related discipline.
• Ability to work independently and willing to perform overtime when required to support the manufacturing operations.
• Required to work in cleanroom environment.
• Familiar with Microsoft Word, Excel and Access.
• Good communication and writing skill.
• Entry level candidates are welcome to apply.

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• have relavant certificates/diploma
• hardworking and keen
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• have relavant certificates/diploma
• hardworking and keen
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

Responsibilities:

• To assist in preparation of BIM model and content for BIM coordination meetings
• Adhere to BIM execution plan and project workflow criteria under the direction of Architect in-charge
• Support project team and efficiency in workflow to achieve BIM deliverables as per requirements timely
• Leveraging BIM software and tools as a methodology to coordinate design documentation
• Assist in updating BIM standard and template for project
• Familiar with BIM submission, regulations and guidelines

Requirements:

• Specialist Diploma in BIM/VDC preferred
• Minimum 2 years relevant working experience in building contruction (Architecture), Singapore
• Knowledge of authorities' requirements and overall project process
• 5 days work week, Mondays to Fridays
• Location: Bugis, Singapore

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

JOB SCOPE
a) Review and update ISO documents such as LQP, LQM, STP, SOP and other related documents.
b) Ensure accurate and prompt documentation and analysis of records.
c) Perform method validation and measurement uncertainty for tests.
d) Perform calibration and maintenance for the equipment.
e) Manage and maintain laboratory supplies and inventory
f) Coordinate daily sampling and analysis schedules with operation staffs to ensure the requirement are met.
g) Ensure good housekeeping of laboratories facilities and equipment.
h) Perform any other duties as assigned by Supervisor and/or Management

REQUIREMENTS

a) Good working attitude and interpersonal skills.
b) Able to work independently as well as in a team.
c) 1 to 2 years relevant working experience.
d) Entry level candidates are welcome to apply.
e) Diploma in relevant field.

WORK SCHEDULE

Monday to Friday: 8.30 am to 5.00 pm

Saturday: 8.30 am to 1.00 pm

Roles & Responsibillities

- Responsible for providing air conditioning (air conditioning system) service,such as inspection,maintenance,installation,air-conditioning failure.
- Provide monthly maintenance and operation services to customers.
- Effect ive handing of fault/emergency repairs and customers complains.

Requirements:
- Minimum 1-2 years if experience with SPM or Diploma required.
- Basic command of English, spoken and written.
- Able to start work immediately.
- Valid Singapore class 3 driving license.

Job position: Tunnel Control Operator

Shift timing: 7 AM – 3 PM , 3 PM – 11 PM , 11 PM – 7 AM

Working Location: Pasir Panjang

Job Responsibilities:

a) Ensure that only authorised staff displaying valid security passes are permitted to enter the Company’s installation

b) Ensure that all items / materials taken out of the TCC are accounted and recorded

c) Ensure that the company’s facilities, main and pedestrian gates are closed and locked whenever they are left unattended

d) Ensure that photo taking and video filming are not permitted in the premises unless with the approval of at least the relevant Head of Section

e) Record all incidents in the Occurrence Book and immediately report all incidents/fire alarms/malfunctioning of CCTV, Fence Intrusion Detection System and Vehicle Crash Barrier System to the company and the Security Command Centre (“SCC”)

f) Attend to any incidents/matters/activation of fire alarms with Comms set and execute company’s Standard of Procedure

g) Contact the relevant Contact Person/s during an emergency

h) To enforce any instructions/directives in connection with CRISIS management such as Severe Acute Respiratory Syndrome, Flu Pandemic or any other matter health related incident as required by the relevant authorities

i) Ensure all equipment and keys are accounted for when changing shift

j) Comply with all Standard Operation Procedures (SOP) issued by the Company

k) Support any other duties as assigned includes tunnel exercise with external parties such as SCDF, EMA, etc

l) Check that the entries made by contractors/visitors in the visitor’s log book sare correct and complete

m) Not allow any unauthorized person, including the Company staff to enter the control room unless approved by the Company

n) Operate and monitor RFID system to track all personnel enter/exit tunnels

o) Monitor Tunnel SCADA system (similar to Building Monitoring System)

p) Perform emergency SOP to guide staff/workers to evacuation out of tunnels

q) Monitor and trending data of M&E systems

r) Ensure an emergency call-out service is available at all times

s) Any other systems and components, which are to monitor but not specifically

mentioned in the abovementioned sub-clauses but are within the Contract Area, shall be included in this Contract.

AUTO CAD Drafting for building & Steel Plate NESTING.

Have a good knowledge in CAD MATIC.

Preparing Engineering Drawings and steel weight checking.

QA / QC Document controller.

Have a good knowledge in M.S OFFICE.

Material taking o! for fabrication.(MTO)

Preparing Dimensional Reports

• Checking and inspecting the quality of works during construction.

• Checking actual construction according to drawings and

specifications.

• Coordinate with the clients for whatever revision on drawings and

in

actual Construction and Submit weekly site works progress report to

the client.

• Project Planning.

• Materials and Resources Forecasting and Procurement process.

• Execution of the Entire Building’s Structures and Finishes with

Project

Team for smoothing the work progress.

.O!ce Administrator works

No experience welcome, on job training provided!

• The incumbent is required to perform 2D echo independently for both out-patients and in-patients.
• He/she is to recognise a wide range of common and uncommon cardiac conditions,prepare the preliminary report for the primary team and reporting cardiologist, escalate serious abnormal findings with appropriate urgency to the reporting echocardiologist.
• Perform other technical procedures as required

Job Requirements:

• Diploma in Biomedical Science/Engineering or medical related degree.
• Candidates with echo experience is preferred.
• Fresh graduates are welcome to apply too.

Roles and Responsibilities:

• Assist in the execution of construction projects by preparing sites, materials, and tools required for each task
• Follow instructions from senior technicians to ensure compliance with project specifications and safety standards
• Conduct basic measurements and calculations to support project documentation and reporting
• Participate in site inspections and quality assurance checks to ensure work meets established standards
• Maintain tools and equipment in good working condition, reporting any issues to senior staff
• Collaborate with team members to promote a safe and efficient work environment

Requirements:

• At least 3+ years of working experience in related field
• Strong technical knowledge and hands-on experience
• Pro-active and good working attitude
• Able to work on weekend/Public Holidays should the need arise
• Able to work irregular hours should the need arise

• Checking equipment and operating systems on a regular basis.
• Ensuring machinery is at optimum performance.
• Performing troubleshooting and tests on equipment or machinery.
• Performing required repairs.
• Installing preventative measures to avoid potential malfunctions.
• Handling tools like power tools and rigging equipment.
• Carrying out hot work such as welding and cutting.
• Solving issues regarding motor, conveyor and hydraulic equipment.
• Operating equipment like forklifts.
• Maintaining the workshop, warehouse and tools area.
• Assisting project engineers as requested.
• Complying with company safety guidelines.

More than 5 years experience in same field