Total 1,108 Others job vacancies

The Senior Engineer supports photolithography process development for advanced memory technologies through hands‑on experimentation, data analysis, and yield improvement activities. This role focuses on execution excellence, disciplined learning, and collaboration, operating under guidance from senior technical leaders. Success in this role requires strong fundamentals in photolithography, analytical rigor, and the ability to translate experimental data into actionable insights. 

Main Responsibilities 

• Execute photolithography process development, optimization, and troubleshooting tasks in support of yield, quality, and performance targets. 

• Perform DOE, SPC, and statistical analysis to characterize process behavior and identify improvement opportunities. 

• Support material evaluations, defect learning, overlay analysis, and process window characterization. 

• Assist with integration learning during development and early manufacturing ramps. 

• Collaborate with cross‑functional teams including integration, etch, metrology, and yield engineering. 

Other Responsibilities 

• Document experimental procedures, results, and learnings in technical reports and presentations. 

• Support technology transfer activities under direction of senior engineers. 

• Integrates AI‑assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements. 

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI‑enabled enhancements within one’s scope of work. 

Candidate Profile 

Minimum Qualifications / Experience 

• PhD, or Master’s ≥3 yrs, or Bachelor’s ≥5 yrs of relevant experience in 
  Electrical Engineering, Materials Science, Chemical Engineering, Physics, or related field, with foundational experience in semiconductor photolithography process development. 

Must‑Have Technical Skills 

• Demonstrated ability to contribute effectively to photolithography process development initiatives and improvement plans. 

• Deep knowledge in optics, immersion lithography, polarized illumination, and low k1 imaging  

• Proficiency in lithography simulation tools, material characterization, DOE, SPC, and basic statistical data analysis 

Must‑Have Soft Skills 

• Analytical thinking and structured problem‑solving 

• Collaboration and openness to learning 

• Clear technical communication 

• Project Management; especially in technical & technology programs  

• Demonstrates ability in applying AI tools to improve workflows, drive efficiency, and support data-informed decisions across teams and projects.

Highly Desirable / Preferred 

• Exposure to advanced lithography (193nm, 248nm, 365nm) and EUV processes 

• Hands-on experience with innovative photolithography equipment and metrology tools 

Embody Micron’s core values: 

• People – Respect, develop and empower others  

• Innovation – Drive continuous improvement and breakthrough thinking  

• Tenacity – Show grit and determination  

• Collaboration – Build trust and foster teamwork  

• Customer Focus – Deliver excellence and value 

You are responsible for new equipment introduction, risk assessment, equipment set-up, release, PM, Calibration, lab audits and as well as continuous improvement activities such as equipment reliability improvement, cost reduction, and equipment usage optimization. Through this role, you will enhance your technical skills in equipment management and improvement, project management, and strengthen your engagement and network with vendors and global GEL organizations across Micron sites.

Responsibilities

-Support GEL Equipment and lab operations including Internal and External audits, ESD and PM, Calibration, equipment troubleshooting, Safety and Chemical controls.

- Oversees the installation, modification, upgrade and maintenance of Engineering equipment.

- Maintains current records on equipment manufacturers’ technical notices, upgrades and safety issues. Studies equipment performance and reliability. - -- Establishes programs and solutions for increasing uptime and for equipment problems that affect the engineering process.

-Provides technical support to the engineering equipment repair and process engineering organizations. Defines and writes preventative maintenance schedules.

- Collaborate with cross functional teams on equipment requirements, space planning, facilitation, purchase and installation of equipment.
- Equipment inventory controls and critical spare parts planning.

- Coordinate external vendors on training, repair, and preventive maintenance of equipment.
- Manage external vendors expectation, set and assess goals and achievements.
- Analyze and support stakeholders’ requirements and expectations.
- Foster closer collaboration amongst cross functional teams.
- Focus on customer needs and provide timely solutions.

Requirement

• Bachelor's degree in engineering with experience with ESD checks

• At least 1 year of experience in Semiconductor Equipment or Tools PM, calibration, and troubleshooting.

• Knowledge with Automated Optical Inspection and ANSYS Simulation

Job Description

• Must be able to understand Technical Drawing
• Preparation of technical specifications and tender documentation.
• Monitoring and ensuring that the work progress is within the schedules.
• Able to do submission of BIM
• Shop-drawings submission for Consultants’ approval
• Attend Project Technical meetings
• Appy and preparation of submission for authority testing & commissioning of project equipment

Requirement

• Administrate contractual requirement of all projects including payment terms and variation orders.

· Provide technical assistance and problem solving in projects.

· Plan, organise and assign project engineers and fabrication team to each specific project.

· Good working attitude, responsible, self-motivated and goal-oriented, a strong desire to deliver results.

Any adhoc projects assigned by General Manager

This role is integral to a pioneering research project focused on advancing geotechnical

investigation and monitoring techniques in the geotechnical engineering sector. The position

requires a combination of lab-based and field-based research.

Job Summary

We are seeking a highly motivated Research Engineer to join our team in developing and

validating a digitalise system for advanced geotechnical engineering solution. The role is

research-based and requires regular time spent both in the office/lab for data analysis and in

the site for field trials and system calibration.

Key Responsibilities

• Research &Development: Conduct detailed literature reviews and identify technical gaps.
• Field Execution& Data Acquisition: Plan and execute field trials on selected sites.
• Data Analysis& Correlation: Develop and validate robust correlation models.
• Digital Platform Collaboration: Collaborate with the software team on the development and testing of a server-based online monitoring platform.
• Documentation: Prepare technical reports, progress updates, and develop detailed Standard Operating Procedures (SOPs) and user guide manuals.

Requirements

• A degree in Civil Engineering is required; fresh graduates are welcome to apply.
• Experience: A strong interest in geotechnical engineering, site investigation, and digital monitoring technologies.
• Skills: Proficiency in data processing, statistical analysis, and technical report writing.
• Work Environment: Must be willing and able to work in both site (fieldwork for trials, calibration, and data collection) and office settings (analysis, reporting, and platform development collaboration).

You may send your resume / CV to email address directly: hr@geonamics.com.sg

Position Summary

The Electrical Simulation Engineer is responsible for product package electrical simulation. 

Candidates with semiconductor packaging experience are encouraged to apply for this position. 

Responsibilities 

• Conduct simulation on SiPi and High speed digital area in component & system level 

• Conduct simulation on RF, EMI, EMC, in component & system level 

• Provide comments and recommendation to product design and process optimization 

• Provide electrical input to mechanical simulation for thermal and stress analysis. 

• Prepare the simulation reports with data analysis and recommendation. 

• Other ad-hoc activities assigned by the reporting manager. 
  

Requirements

• Minimum Master's Degree in electrical engineering or similar discipline.
• Prior experience in electrical simulation within semiconductor industry is preferable.
• Experience in handling internal and customer projects.

• Hands-on skills on EDA tools:

1. ANSYS: Siwave, Q3D, HFSS, Circuit, etc.
2. Cadense: PowerSi, PowerDC, ExtractIM, Clarity, etc.
3. Keysight: ADS, etc.

Reporting to the Project Manager

Overseeing the construction activities, planning, implementation, and monitoring work schedules in accordance to the master and detailed work program.

Liaise with consultants for technical issues and coordinate with subcontractors on the site activities.

Managing interfaces with other contractors working on the project.

Prepare project progressive report to the Project Manager/Project Director.

Prepare report and method statement.

Monitor ongoing construction activities.

We are looking for a motivated and experienced Pile Test Engineer to join our growing team in the construction industry.

Job Responsibilities:

• Conduct and supervise pile load tests (static / dynamic).
• Prepare method statements, test reports, and documentation.
• Coordinate with consultants, clients, and site teams.
• Ensure testing works comply with project specifications and safety standards.
• Analyze test results and provide technical recommendations.

Requirements:

• Degree / Diploma in Civil Engineering or related field.

• Relevant experience in pile testing works preferred.

• Familiar with MOM / site safety requirements.

• Good communication and reporting skills.

• Able to work independently and on-site.

What We Offer:

• Competitive salary (based on experience)
• Career growth opportunities
• Supportive working environment

You may send your resume / CV to email address directly: hr@geonamics.com.sg

Responsibilities: 

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type 

• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement Prioritize within Singapore based manufacturing Wet Etch team on the key technology issues that need TD breakthroughs. 

• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement Participate with Boise TD Wet Etch peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements 

• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron. 

• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions 

• Identify process simplification opportunities and drive cross functional teams in implementation Incorporate best known manufacturing methods into early development phase of upcoming nodes. 

• Design and implement advanced process monitoring and control methodologies. 

• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment. 

• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings 

• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers. 

• This position requires communication and collaboration with partners both locally and globally. 

• Strict adherence to Micron Intellectual Property protection policy is a must. 

• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions. 

• Using, applying, and leveraging AI, identify opportunities to streamline workflows, optimize processes, and support innovation by incorporating AI-driven solutions and enabling data-driven decision-making across projects and teams

Requirements: 

• Masters/PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Chemistry are welcome to apply. 

• 2-3 years of semiconductor industry experience is preferable 

• A deep understanding of chemistry, chemical kinetics, thermodynamics and mass transport 

• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM, FTIR. Understanding of various integration and structural impacts and constraints related to wet etch processes. 

• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular. 

• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data 

• Working knowledge of Design of Experiments (DoE) Proven ability to collaborate with local and overseas teams on projects 

• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications. 

• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously 

• Ability to travel for extended periods of time and stay at Boise TD for 2-4 months at a stretch to work on technology development. 

Micron’s Singapore Process Development (PD) group in Technology Development (TD) is looking for Plasma-CVD / Diffusion PD engineer to support Plasma-CVD/DIFF process development of advanced technology nodes. You will design and optimize Plasma-CVD or Diffusion for Micron’s innovative NAND Flash products.

As a PD Engineer, you will take ideas from conception through process development then implementation in our manufacturing facilities. In addition to your technical responsibilities, you will also run the projects of highly technical nature. This role is essential to the success of Micron’s products and may require business-related travel. Primary areas of responsibility include Plasma-CVD or Thermal Diffusion process and film characterization, optimization, design, troubleshooting, process transfer and fundamental research.

Advanced Thin Films PD Engineer will interact with groups such as Process Integration, Metrology, Surface characterization labs, Electrical Failure Analysis, Yield Enhancement, Manufacturing and Equipment vendors/suppliers, to ensure robust thin film processes that meet the precise physical and electrical requirements for Micron Products.

As an Advanced Thin Films PD Engineer at Micron, you will be required to travel for brief business purposes. This position requires that you have an aptitude for a research and development (R&D) environment, good organizational skills and ability to work independently as well as in a team environment. This position may often require weekend support to R&D Pilot Line, for example, in case of pilot/manufacturing line excursions/downs and monitoring program-critical lots thought various modules as deemed necessary.

Your responsibilities will include, but are not limited to:

• Process Development

• Design and develop and deliver process package to meet product specification requirements as per program targets and timelines

• Characterize the processes using appropriate techniques (SEM, TEM, XPS, SIMS, AFM, etc.)

• Design and execute experiments, analyze data and present it in the appropriate forums.

• R&D Pilot Line in the Fab

• Improve process maturity, capability and sustain processes in the fab under your ownership

• Updating the Fab engineers on customer issues and technology needs.

• Supporting root cause defect and unique fail mode analysis.

• Process Integration

• Delivering advanced technology to meet future product nodes.

• Developing recipes to meet structural & electrical requirements.

• Managing wafers though Thin Film levels in support of special requirements.

• Other Process Areas

• Working in cross-functional teams to jointly develop Array and CMOS structures.

• Supporting cross-functional failure analysis and yield improvement.

• Advanced Thin Film peers

• Maintaining or developing expertise in multiple process, hardware, or technology areas.

• Serving as a resource for peers in recipe & process development.

Successful candidates must have:

• Education requirements

• PhD in Physics, Materials Science, Chemical Engineering, Electrical Engineering, Chemistry, or related fields

• BS/MS+5 years equivalent industry or research experience may substitute for a PhD.

• Understanding in one or more of the following topics Transport phenomena, Electromagnetics, Atomic/Molecular physics, and Surface phenomena.

• Solid troubleshooting, experimental design and data analysis skills.

• Strong computer skills, including MS Office.

• Plasma physics background and understanding of plasma sources used in plasma CVD is highly preferred.

• Understanding of CVD and Diffusion deposition processing principles.

• Rudimentary understanding of process control and Statistical Process Control (SPC).

• An understanding of solid state devices.

• An understanding of semiconductor process.

• Knowledge of advanced data analysis techniques and scripting is highly preferred

• Open to work off shift and weekends if necessary

• Open to domestic and international travel

Key Responsibilities

Quality System, ISO & Audit

• Act as Management Representative (MR) forISO 9001 certification.
• Plan, conduct, and coordinate internal quality audits and follow upcorrective and preventive actions.
• Ensure compliance with ISO standards, customer requirements, and regulatoryobligations.
• Maintain, review, and control all quality system documentation, procedures,and records.

Quality Reporting & Data Analysis (Core Focus)

• Prepare and submit weekly and monthlyquality reports to management.
• Track and analyze NCR status, customer return closure cycle time, DPPM,FA/NPI First Pass Yield, and audit findings.
• Monitor operational and quality performance data to identify trends, risks,and improvement opportunities.
• Support management reviews with accurate data and analysis.

FA / NPI & Quality Planning

• Coordinate with Sales, Engineering,and Production on FA and NPI quality requirements.
• Create and maintain Quality Control Plans, Inspection Plans, and CMMinspection programs for new products.
• Monitor FA/NPI cycle time and drive continual improvement activities.

• Participate in quality improvementprojects.

Customer & Supplier Quality Management

• Act as the primary liaison with customersand suppliers on quality-related matters.
• Manage customer feedback, Engineering Change Notices (ECN), andNon-Conformance Reports (NCR).
• Ensure timely corrective actions, closure, and regular status updates.
• Escalate scrap and major quality issues to the Quality Manager immediately.

Calibration & Measurement Control

• Manage calibration of measuringinstruments, equipment, and tools to ensure accuracy and traceability.
• Maintain calibration schedules and records and ensure timely calibration.
• Coordinate with external calibration service providers when required.

Continuous Improvement & Operational Support

• Identify quality risks and process gapsand implement corrective and preventive actions.
• Support continual improvement initiatives and business continuity planning.
• Research and review technical and quality-related data for internal andcustomer needs.
• Track work schedules to meet reporting, audit, and submission deadlines.

Qualifications & Requirements

• Higher Nitec or higher in Precision Engineering, Quality Management, or related field.
• ISO 9001 Internal Auditor certification is preferred.
• Experience acting as Management Representative (MR) is a strong advantage.
• Proven experience in quality reporting, documentation control, and auditmanagement.
• Familiar with FA, NPI, CMM inspection, and manufacturing quality systems.
• Strong analytical, reporting, and communication skills.
• Experience in precision engineering or manufacturing environment preferred.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

A Construction Company in Woodlands have vacancy for Building Construction Engineer

Job Scope

· Quality control and inspection

· Prepare and submit weekly and monthly site progress report to management

· Prepare method statement

· Safety regulations

· Meeting with clients

· Supervising your Construction Team

· Controlling Materials Order and Usage

· Improving Company's Work Quality

· All other necessary works

· Attend Site Survey and prepare site drawings

· Coordinate with officers, main cons, clients etc

· Attend kick off meeting

Criteria

· Able to work independently and work as a project team

· Able to carry out prescribed work in a safe, competent or compliant matter.

· Possession of outstanding written and verbal communication skills, as well as having strong interpersonal skills

· Self-motivated individual, with phenomenal confidence working with diverse partner groups

· Able to perform using AutoCad and other drawing applications

· Good team player and handle stress and deadlines.

· Candidates with more experience may be considered for more senior positions.

· We offer attractive remuneration package to the right candidate.

· Interested candidates are invited to submit detailed resume stating:-

· Current salary;

· Expected salary;

· Reasons of leaving and

· Date of availability.

Benefits

· High Potential of growth

· Medical and dental coverage

· Year end remuneration benefits

We regret that only shortlisted candidates will be notified.

Job Descriptions:

• Lead NPI capacity planning and ramp-up readiness.
• Design and optimize FATP line layouts and production flow.
• Govern time studies and validate standard times across FATP lines.
• Drive line balancing optimization and manpower efficiency improvement.
• Perform OEE analysis and eliminate bottlenecks.
• Lead Lean initiatives, including VSM, SMED, Kaizen events.
• Collaborate with the automation team to optimize production line headcount and drive cost reduction initiatives.
• Quantify cost-saving opportunities and track financial impact.
• Mentor junior IE engineers.
• Present productivity analysis and improvement proposals to management

Job Requirements:

• Diploma or Bachelor Degree in Industrial Engineering or a related field; Lean / Six Sigma certification is an advantage.
• Minimum 5 years of experience in FATP or high-volume manufacturing environments.
• Strong expertise in time study, MTM, line balancing, capacity modeling, manpower optimization, OEE analysis, and throughput improvement.
• Advanced knowledge of FATP processes, with a solid understanding of automation impact on labor modeling.
• Proficient in advanced Excel, Power BI, and other data analysis tools, with the ability to prepare financial and productivity reports.
• Strong analytical, structured problem-solving, and project management skills.
• Results-driven mindset with leadership, mentoring, and cross-functional influencing capabilities.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

Roles & Responsibilities

• Conduct site visits, site feasibility, solar system design, and complete execution.
• Conduct engineering site audits to collect structural, electrical, and related site information for use in the design of commercial and utility-scale solar power systems.
• Design the arrangements of the solar panels for Rooftop, Ground-mounted, Floating, and other various supported electrical equipment and selection of cables for plant including layouts and schematic diagrams and calculation of technical sizing, BOQ/BOM.
• Perform computer simulation of solar photovoltaic (PV) generation system performance or energy production to optimize efficiency.
• Create checklists for review or inspection of completed solar installation projects.
• Analyse costs and benefits of proposed designs or projects and performing cost reduction analyses for solar systems.
• End to end execution of solar projects.
• Procurement & Vendor Coordination

Requirements

• Willing to travel and will be working in Singapore.
• Minimum a Bachelor’s Degree in Engineering, renewable energy or relevant field
• Minimum two (2) years of relevant work experience
• Experience and knowledge of reviewing Financial Modelling is preferred
• Preferably with Energy Industry or Renewable Products background
• Preferably to have a good track record of solar PV projects
• Assertive to achieve the KPIs and adaptable both as individual and team player
• Technical advisors, EPC contractors, BD related roles are welcome to apply
• Proficiency in MS Office, autocad and PVsyst

A Construction Company in Woodlands have vacancy for Building Construction Engineer

Job Scope

· Quality control and inspection

· Prepare and submit weekly and monthly site progress report to management

· Prepare method statement

· Safety regulations

· Meeting with clients

· Supervising your Construction Team

· Controlling Materials Order and Usage

· Improving Company's Work Quality

· All other necessary works

· Attend Site Survey and prepare site drawings

· Coordinate with officers, main cons, clients etc

· Attend kick off meeting

Criteria

· Able to work independently and work as a project team

· Able to carry out prescribed work in a safe, competent or compliant matter.

· Possession of outstanding written and verbal communication skills, as well as having strong interpersonal skills

· Self-motivated individual, with phenomenal confidence working with diverse partner groups

· Able to perform using AutoCad and other drawing applications

· Good team player and handle stress and deadlines.

· Candidates with more experience may be considered for more senior positions.

· We offer attractive remuneration package to the right candidate.

· Interested candidates are invited to submit detailed resume stating:-

· Current salary;

· Expected salary;

· Reasons of leaving and

· Date of availability.

Benefits

· High Potential of growth

· Medical and dental coverage

· Year end remuneration benefits

We regret that only shortlisted candidates will be notified.

A Construction Company in Woodlands have vacancy for Building Construction Engineer

Job Scope

· Quality control and inspection

· Prepare and submit weekly and monthly site progress report to management

· Prepare method statement

· Safety regulations

· Meeting with clients

· Supervising your Construction Team

· Controlling Materials Order and Usage

· Improving Company's Work Quality

· All other necessary works

· Attend Site Survey and prepare site drawings

· Coordinate with officers, main cons, clients etc

· Attend kick off meeting

Criteria

· Able to work independently and work as a project team

· Able to carry out prescribed work in a safe, competent or compliant matter.

· Possession of outstanding written and verbal communication skills, as well as having strong interpersonal skills

· Self-motivated individual, with phenomenal confidence working with diverse partner groups

· Able to perform using AutoCad and other drawing applications

· Good team player and handle stress and deadlines.

· Candidates with more experience may be considered for more senior positions.

· We offer attractive remuneration package to the right candidate.

· Interested candidates are invited to submit detailed resume stating:-

· Current salary;

· Expected salary;

· Reasons of leaving and

· Date of availability.

Benefits

· High Potential of growth

· Medical and dental coverage

· Year end remuneration benefits

We regret that only shortlisted candidates will be notified.

• Data Analysis skill to perform in-depth analysis on the testing data collected from the field to summarize the findings of the collected data
• To work closely with the engineering team to understand how the operations of various electrical equipment and systems
• Willingness to learn how to use various condition monitoring software, sensors and testing instruments.
• Participate in In-house training sessions or workshops to enhance the skills in Data Analysis
• Able to understand High Voltage Electrical Network
• Microsoft Office in expert mode to prepare test report and presentation material.
• Able to complete tasks assigned by team with minimum supervision
• Other ad-hoc duties

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

Key Responsibilities:

• Partner with project managers, clients, and the development team to understand user needs, business goals, and technical requirements.

• Create user flows, wireframes, interactive prototypes, and high-fidelity designs for websites, mobile applications, and marketing materials.

• Present and articulate design concepts and solutions to internal teams, stakeholders, and management.

• Identify gaps in user insights, motivations, and pain points to strengthen design strategies.

• Propose and conduct user research initiatives, including usability testing, interviews, and surveys, and translate findings into actionable design recommendations.

• Collaborate with cross-functional teams, including product owners, to ensure solutions are feasible, scalable, and aligned with both user and business needs.

• Ensure all design outputs are visually compelling, intuitive, and consistent with established brand guidelines and design systems.

• Work closely with front-end developers to ensure accurate and high-quality implementation of designs.

• Contribute to front-end development efforts (training will be provided).

Requirements:

• A strong portfolio demonstrating visual design expertise, user-centered design thinking, research capabilities, and analytical skills.

• Proficiency in design tools such as Figma or equivalent platforms.

• Experience gathering requirements through workshops, stakeholder interviews, and research activities.

• Solid understanding of user research methodologies and hands-on experience conducting usability testing.

• Ability to communicate ideas effectively through storytelling, storyboards, mood boards, flowcharts, and presentation decks.

• Strong verbal, written, and visual communication skills with the ability to collaborate across teams.

• Exceptional attention to detail with a commitment to pixel-perfect execution and design system consistency.

• Ability to thrive in a fast-paced environment and manage multiple projects concurrently.

• Strong business acumen with the ability to align design decisions with broader organizational goals.

• Familiarity with Agile and Scrum methodologies is an advantage.

• Experience in project management is a plus.

• Experience in front-end development is a plus.
  

  Work Location: North / Central

  
  

  (EA Reg No: 20C0312)

  Please email a copy of your detailed resume to kayla@talentsis.com.sg for immediate processing.

  Only shortlisted candidates will be notified.

LEE TECH ENGINEERING PTE LTD
We are a well-established construction company. In line with our expansion plans, we invite suitably qualified individuals to fill the following position:

PROJECT ENGINEER

Responsibilities:

• Handle documentary work for tenders, progress reports, handover documents, and as-built drawings.
• Monitor project progress and compare it with the project schedule.
• Respond to customer complaints and feedback.
• Troubleshoot air-conditioning system issues.
• Prepare, schedule, coordinate, and monitor assigned engineering projects.
• Ensure compliance with applicable codes, practices, QA/QC policies, performance standards, and specifications.
• Communicate with clients to understand their needs and represent them in the field.
• Assign responsibilities and mentor the project team.
• Cooperate and communicate effectively with the project manager and other participants to provide assistance and technical support.
• Independently motivated, able to review engineering deliverables, and take corrective actions as needed.

Requirements:

• Minimum relevant certificate in Mechanical Engineering.
• At least 2-3 years of related working experience is preferred.
• Open to candidates of all experience levels.
• Proficient in MS Project and AutoCAD.
• Strong communication skills.
• Outgoing, willing to work extra hours, and possess a positive working attitude.
• Able to work independently and multi-task in a fast-paced environment.
• Candidates who can start immediately or with short notice are preferred.

Interested candidates, please email your resume to leetech@leetech.com.sg.

Other Information

- Location: Island Wide

- Salary Range : $3,000 - $4,500

At Holiday Inn® Hotels & Resorts, our job is to bring the joy of travel to everyone. That’s where you come in. When you’re part of the Holiday Inn Hotels & Resorts brand, you’re more than just a job title.

Join us as a Assistant Chief Engineer/Engineering Manager in Holiday Inn Singapore Orchard City Centre. You’ll have ambition, talent and obviously, some key skills. Because for this vital role, we’re looking for someone who can:

• Assist the Chief Engineer to oversees the engineering/maintenance operations of the hotel.

• Be responsible to ensure that all the engineering and maintenance activities of the hotel are conducted to the highest professional standards at all times, with guest comfort and safety being the highest priority.

• Assist the Chief Engineer in the preparation of the annual departmental operating budget and financial plans.

• Assist the Chief Engineer to develop preventive maintenance programs to ensure the facility is maintained and in service for our guests (example: lighting, refrigeration, heating, air-conditioning, water treatment systems, and pools)

• Assist the Chief Engineer to coordinate projects with general contractor and sub-contractor, and ensure quality work is performed cost-effectively

• Assist Chief Engineer to develop, implement and manage energy conservation programs for the property to minimise expenses

• Educate and train all engineering colleagues in compliance with governmental and safety regulations

• Ensure the team is properly trained and has the tools and equipment to carry out job duties

• Promote teamwork and quality service through daily communication and coordination with other departments

• Communicate with all hotel department heads to stay informed of maintenance needs and ensure timely responses to requests.

What We Need From You

• Certified in Electrical or Mechanical Engineering

• Five years operating experience in a hotel engineering department

• Minimum of 5 years experience in a supervisory position in a hotel engineering department or a related field with a proven record of accomplishment or success.

• Experience in hotel renovation is an advantage

• Advanced knowledge of building management/engineering

• Highly committed to delivering a high level of guests experience

• Excellent written and spoken communication skills in English, particularly to deal effectively with people from diverse backgrounds.

What We Offer

In return for your hard work, you can look forward to a highly competitive salary and benefits package – including:-

• Duty meals
• Birthday Leave on your birthday month
• Monthly LOVE Hour
• Medical, dental & optical benefits
• Insurance Coverage
• 25-50% F&B Discount at restaurants within IHG Singapore Hotels
• Special Employee Rate at all IHG Hotels worldwide
• Room to Grow opportunities

What’s more, because your career will be as unique as you are, we’ll give you all the tailored support you need to make a great start, be involved and grow.

And because the Holiday Inn Hotels & Resorts brand belongs to the IHG® family of brands, you’ll also benefit from all of the opportunities that come from being part of a successful, global hospitality company with over 6,000 hotels in over 100 countries around the world.

So whoever you are, whatever you love doing, bring your passion to Holiday Inn and IHG and we’ll make sure you’ll have Room to be yourself. Find out more about joining us today by going to careers.ihg.com.

about the job.

• Design, implement, and manage hybrid and cloud-based virtualization platforms and server architectures.
• Oversee continuous system performance tracking, capacity planning, and proactive infrastructure health monitoring.
• Deliver technical resolution and troubleshooting support across network and server ecosystems.
• Execute scheduled system upgrades, routine firmware patching, and data backup recovery protocols.
• Coordinate batch scheduling and automated file transfer processes while upholding strict regulatory compliance standards.

skills and experience required.

• University degree in Computer Science, Information Technology, or related
• Minimum 5 years of experience with hands-on experience managing infrastructure within cloud and server environments.
• AWS or cloud related experience
• Solid capability in supervising multi-platform server OS environments, scripting automation, and performance analytics tools.

To apply online please use the apply function, alternatively you may contact Chloe Chen at chloe.chen(@)randstad.com.sg. (EA: 94C3609 /R1768253)

Role Overview

The Project Co-Ordinator cum BIM is responsible for developing, coordinating, and managing Building Information Modelling (BIM) deliverables for engineering projects. The role involves producing detailed 3D models, construction drawings, clash detection reports, and coordinating with consultants, contractors, and project teams to ensure successful project execution.

The successful candidate shall possess strong technical knowledge of BIM processes, engineering systems, and construction methodologies while supporting project delivery from design through commissioning

Responsibilities

BIM Modelling & Drafting:
-  Develop and maintain BIM models using Autodesk Revit, AutoCAD, Navisworks, and other BIM software.

-  Prepare detailed engineering drawings, layouts, sections, elevations, and shop drawings, construction drawings, as-built drawings, and BIM deliverables.

-  Create and update 3D models based on engineering design requirements.

-  Ensure all BIM models comply with project BIM standards and client requirements.

-  Maintain model accuracy throughout project development and construction stages.

Coordination& Collaboration:

-  Coordinate with Engineers, Project Managers, Consultants, Architects, and Contractors.

- Participate in BIM coordination meetings and design reviews.

-  Assist in multidisciplinary model integration and coordination.

-  Resolve design conflicts through BIM coordination processes.

-  Support construction teams with model-related technical clarifications.

-  Lead BIM coordination for assigned projects.

-  Review and approve BIM models prepared by junior modellers

-  Establish BIM standards and workflows for project teams.

Engineering Support:

-  Support engineering teams in preparing layouts and technical submissions.

-  Assist in design development and engineering documentation.

-  Verify engineering systems routing, equipment placement, and installation requirements.

-  Ensure designs comply with local regulations, standards, and project specifications.

Documentation& Deliverables:
-  Prepare BIM reports, coordination reports, and progress updates.

-  Manage BIM documentation and drawing revisions.

-  Maintain project BIM libraries, templates, and standards.

-  Support preparation of authority submissions where required.

Site Coordination:
-  Support site teams during installation and construction activities.

-  Conduct site verification and model updates based on field conditions.

-  Assist in preparing as-built BIM models and documentation.

Requirements

-  Bachelor in Engineering, BIM, or a related field (or equivalent work experience).

-  Minimum4-6 years of experience in 3D Modelling for building services or a related field.

-  Proven experience using BIM software (e.g., Autodesk Revit, AutoCAD, Navisworks Manage, BIM 360 / Autodesk Construction Cloud, Microsoft Office Suite, Unigraphics NX)or other relevant Modelling tools.

-  Demonstrated knowledge of Data Centre Infrastructure, Mechanical & Electrical (M&E)Services, Building Management Systems (BMS), Energy Management Systems (EMS),Power Monitoring Systems (PMS), ELV Systems, HVAC Systems, and the coordinationand integration of these systems within BIM and construction environments will be highly advantageous.

-  Strong understanding of construction drawings and specifications.

-  Excellent communication, collaboration, and interpersonal skills.

-  Ability to work independently and as part of a team.

-  Strong attention to detail and accuracy.

As a heating, ventilation and air conditioning (HVAC) engineer, you will ensure temperature and ventilation systems are working efficiently and safely. 

The job role of a HVAC engineer involves the following duties:  

• Surveying sites ahead of fitting heating, ventilation or air conditioning systems 
• Planning the placement of pipework, ducts and control panels 
• Installing HVAC components 
• Performing quality checks to ensure systems are working efficiently and safely 
• Carrying out maintenance on HVAC systems 
• Finding and fixing faults 
• Helping customers to reduce their energy use

Skills

• Understanding of building and construction 
• Capable of using tools and machines 
• Excellent attention to detail 
• Good customer service skills 
• Logical thinking skills 
• Ability to use your initiative.