Total 288 Others job vacancies

Duties & Responsibilities
●       Perform routine maintenance on trucks, such as checking batteries and changing the oil to ensure proper vehicle running
●       Inspect various parts of trucks, including brake systems, wheel bearings, and steering mechanisms to ensure they are in the proper operating condition
●       Utilize different tools and equipment, such as pressure gauges, pneumatic wrenches, welding equipment, screwdrivers, hoists, and jacks to repair trucks while constantly exercising safety precautions
●       Diagnose malfunctions in defective equipment by inspecting and testing using devices such as motor analyzers, handheld computers, and chassis charts to determine how to address problems
●       Test drive vehicles to ensure they are running properly, diagnose issues, and provide solutions
●       Replace parts, valves, bearings, and gears as needed, and repair vehicle cooling and heating systems
●       Measure vehicle emissions to ensure they are within the proper limits
●       Ensure that parts conform to factory specifications by inspecting and verifying clearances and dimensions
Requirements
●       High school diploma or equivalent
●       At least two (2) years of work experience in this, as a diesel mechanic, or other related jobs
●       Experience in working with diagnostic computers
●       Must be able to lift heavy equipment and parts regularly
●       Technical certification or degree
●       Able to diagnose and repair heavy equipment, prime mover, lorry & van
●       Able to commit to 5.5 days a week (Monday to Fridays from 8:15 am-5:15 pm, Saturdays from 8:15 am-12:30 pm) with a lunchbreak of one (1) hour
●       Able to work overtime as needed
●       with class 4 driving license for test drive vehicles

Job Description:

• Preparation of samples and standards for analysis
• Routine laboratory testing according to AOAC, In-House methods
• Operation and maintenance of instrumentation
• Maintenance of relevant documentation
• Any other duties as assigned when required
• Ensure all works and reporting of results are in accordance with Quality, Work and HSE procedures and requirements

Requirements:

• Minimum ITE Nitec/Higher Nitec/Diploma in Chemical Process and related fields
• Candidate with experience is an added advantage
• Fresh graduate is welcome as training will be provided
• Good analytical skills and ability to work independently
• Able to start work on short notice preferred

Work location : 121 Genting Lane, ALS Building, Singapore 349572
Please apply with detailed resume stating current/last drawn and expected salary, and notice period.

Responsibilities:

• To assist in preparation of BIM model and content for BIM coordination meetings
• Adhere to BIM execution plan and project workflow criteria under the direction of Architect in-charge
• Support project team and efficiency in workflow to achieve BIM deliverables as per requirements timely
• Leveraging BIM software and tools as a methodology to coordinate design documentation
• Assist in updating BIM standard and template for project
• Familiar with BIM submission, regulations and guidelines

Requirements:

• Specialist Diploma in BIM/VDC preferred
• Minimum 2 years relevant working experience in building contruction (Architecture), Singapore
• Knowledge of authorities' requirements and overall project process
• 5 days work week, Mondays to Fridays
• Location: Bugis, Singapore

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Install, configure, and test mobile phones, SIM-based devices, and telecommunications equipment

Diagnose and repair faults in mobile devices, including hardware and software issues

Perform routine maintenance and system upgrades on mobile communication systems

Troubleshoot network connectivity issues (e.g., signal problems, data connection failures)

Replace defective parts such as batteries, screens, circuit boards, and connectors

Maintain records of repairs, installations, and service activities

Ensure compliance with safety standards and company procedures

Provide technical support and guidance to customers or internal staff

Coordinate with service providers for network-related issues when necessary

• German MNC
• Salary: Up to $3,000 Basic + OT allowances + Variable Bonuses
• 5-day week Monday to Friday, office hours 9 am to 6pm
• Working location: Loyang

• No experience welcome

Responsibilities:

• Manufacturing of chemical products in accordance with the weekly production schedule

• Ensuring availability of all raw materials and packing materials before commencement of weekly production

• Ensuring all raw materials are correctly identified and accounted for

• Maintain housekeeping in the production and area in accordance with the ISO, EHS for Safety and other Governance requirement.

Requirement:

• At least N/O level

• Nitec in Chemical process or equivalent will have advantage

• No experience welcome

• Required to Wear Personal Protective Equipment as per company policy

• Experience with Chemical production will have advantage

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to

roy.yeo@peopleprofilers.com

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Tel:  65 6950 9757

Job Responsibilities:

Create detailed piping drawings, layouts, and isometric diagrams using CAD software.

Develop and modify piping designs based on engineering specifications and project requirements.

Ensure compliance with industry standards, codes, and client specifications.

Collaborate with engineers, designers, and project teams to ensure accurate and efficient designs.

Review and revise drawings as needed based on feedback and site conditions.

Maintain accurate documentation and drawing records for project deliverables.

Assist in material take-offs and bill of materials (BOM) preparation.

Conduct field visits to gather data and verify design feasibility.

Requirements:

Diploma or degree in Mechanical Engineering, Drafting, or a related field.

Proficiency in AutoCAD, Plant 3D, or other relevant design software.

Knowledge of piping systems, symbols, and industry standards (ASME, API, etc.).

Strong attention to detail and accuracy.

Ability to work independently and in a team environment.

Job Description & Requirements

• Operate and maintain Amada machine
• Take charge of tooling and change tools as required

The Requirements:

• No minimum academic qualification required
• Min 3 years experience in metalworking industry
• Able to interpret engineering drawings

Preventive Maintenance Technician- Troubleshoot, repair and maintain food production equipment

- Execute emergency breakdown protocols

- Assist in resolving downtime issues

- Clean equipment and maintain equipment hygiene requirements for production use, after installation and/or repairs

- Collate and coordinate maintenance work, at times need to work with contractor

- Comply with cleanliness and safety regulations while setting up and maintaining food manufacturing equipment

- Able to perform ad-hoc duty when require

- Basic electrical and refrigerator knowledge

- Prepare maintenance reports/records in relation to the work assignedRequirements

- Minimum 1 Year of experience in maintenance work and engineering field, preferable in food manufacturing

- “O” leave / NTC3 or NITEC in Mechanical Enginnering

- Able to performance Shift- Willing to learn new skills

- Positive work attitude

We’re seeking an experienced CMM Specialist to lead advanced inspection and programming in a high-precision machining environment. If you thrive on tight tolerances, complex GD&T, and solving dimensional challenges, this role is for you.

Roles & Responsibilities

·        Program and optimize CMM inspections using PC-DMIS, Calypso,or MCOSMOS

·        Lead and perform detailed dimensional and visual inspections of machined parts using tools such as Smart Scope, micrometers, calipers, CMMs, height gauges, and surface roughness testers.

·        Lead & Prepare inspection reports, first article inspections (FAI) reports for review and approvals

·        Interpret complex GD&T

·        Perform MSA,GR&R, and Cp/Cpk analysis

·        Partner with Engineering & Production to resolve dimensional issues

·        Mentor junior quality team members

·        Foster a culture of accountability, accuracy, and continuous improvement within the quality team.

Requirements

·        Diploma or Bachelor Degree in Engineering or related field.

·        Minimum 5 years of experience in a quality inspection role within precision machining or a high-tolerance manufacturing environment.

·        Proficient in using precision measuring instruments and advanced inspection tools (CMM, vision systems).

·        Strong understanding of GD&T and ability to read complex engineering drawings.

·        Experience with quality tools and methodologies such as FMEA, 8D, Root Cause Analysis, andStatistical Process Control (SPC).

·        Experience in high-mix, tight-deadline manufacturing environments

·        Familiarity with ERP systems

·        Strong Interpersonal skills & Strong time management abilities

·        Responsible,Positive Attitude, Ability to work well in a team

Responsibilities:

• To assist in preparation of BIM model and content for BIM coordination meetings
• Adhere to BIM execution plan and project workflow criteria under the direction of Architect in-charge
• Support project team and efficiency in workflow to achieve BIM deliverables as per requirements timely
• Leveraging BIM software and tools as a methodology to coordinate design documentation
• Assist in updating BIM standard and template for project
• Familiar with BIM submission, regulations and guidelines

Requirements:

• Specialist Diploma in BIM/VDC preferred
• Minimum 2 years relevant working experience in building contruction (Architecture), Singapore
• Knowledge of authorities' requirements and overall project process
• 5 days work week, Mondays to Fridays
• Location: Bugis, Singapore

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

We are looking for a ASSISTANT QUALITY CONTROL to support quality control for hardware devices integrated with our software systems.This role is ideal for someone who is hands-on, detail-oriented, and interestedin testing how hardware and software work together in real-world environments.You will work closely with engineers and senior QA members to ensure reliabledevice performance, system stability, and overall product quality.

Key Responsibilities

• Perform manual testing on hardware devices integrated with software applications
• Verify device functionality, connectivity, and data accuracy across different scenarios
• Test hardware–software interactions, including setup, configuration, and firmware updates
• Execute test cases and test procedures for system, integration, and regression testing
• Identify, document, and track defects related to hardware, firmware, or software behavior
• Re-test issues after fixes to ensure proper resolution
• Assist in preparing and maintaining test cases, test reports, and QA documentation
• Support basic hardware setup, troubleshooting, and test environment preparation
• Participate in sprint reviews and QA discussions with cross-functional teams

Requirements & Qualifications

• Diploma or Degree in Computer Science, Information Technology, Electronics, Mechatronics, or a related field (or equivalent training)
• Basic understanding of software testing concepts and SDLC
• Interest in hardware, devices, or embedded systems
• Strong attention to detail and ability to follow test procedures accurately
• Willingness to learn hardware testing processes and tools
• Good communication skills to clearly report issues and observations

What We Offer

• Hands-on exposure to real hardware–software integrated systems
• Collaborative, cross-functional working environment

Main duties and responsibilities

* Receiving, checking, moving, storing and organising incoming/ outgoing goods

* Ensure goods received into or sent out from the Company are in good condition

* Ensure accurate physical stocks against documents

* Ensure customer deliveries are despatched on right first-time basis

* Practice FIFO stock rotation system to keep the stores in clean and safe working condition

* Store goods in the right location in order to maximise sales and minimise waste

* Maintain the warehouse/site clean and tidy, to ensure safe working practises, ease of availability of stock

* To always keep the site to function efficiently and comply with safety legislation

* Any other ad-hoc duties as assigned tools and test strategies

* Liaise with internal teams

* Ad-hoc job require on off according to the site

* Any ad-hoc duties assigned

Requirement:

• Diploma/ SPM qualification
• Strong in documentation; stock counting
• Basic skill in excel and data entry
• Need to carry at least 20kg of carton (Heavy lifting)
• Candidate may be based at Tampines project site for at least 2 years
• The candidate must be a bilingual person for a Taiwanese company
• Good team communication and positive mindset is required.
• 1 year experience in relevant storekeeping may consider

LOCATION: GUL ROAD (TUAS)
WORK WEEK: MONDAY TO FRIDAY (5 DAYS)

Issuance and checking of PPE and update of logs
Monitor office inventory (stationary, pantry and cleaning supplies)
restock when needed
Handle basic manual tasks (printing, scanning and filling of documents)
Handle incoming and outgoing dispatch
Updating of records, filing, retrieving and reviewing of audit trails

Handle vehicles renewal, dormitory administrative tasks

Computer literate and familiar with Microsoft Excel
Able to work independently, good team player and interpersonal skills

ERP Management (The Jewelry Focus): Lead the customizationand maintenance of the company’s ERP system. Ensure the system accuratelycalculates "Making Charges," labour costs, and real-time gold pricefluctuations.

Inventory & Metal Control: Implement rigorous trackingsystems for "Work-in-Progress" (WIP). In gold production, need to analysesystems to minimize "metal loss" during casting, filing, andpolishing stages.

Production Workflow Optimization: Bridge the gap between thedesign team (CAD/CAM) and the factory floor. Need to analyse bottlenecks in theproduction line—from 3D printing of wax models to the final stone setting.

Data Integrity & Security: Given the high value of thephysical assets, you will manage access controls and audit trails within thesystem to prevent internal fraud or data breaches.

RFID & Barcoding Integration: Oversee the deployment ofRFID tags or QR codes for individual jewellery pieces to ensure real-timelocation tracking across retail and production hubs.

Reporting and Analytics: Develop dashboards formanagement to track production yield, artisan productivity, andsales-to-inventory ratios.

Design Creation: Design Creation: Create original andinnovative jewellery designs, including sketches, renderings, and CAD designs.

Design Development: Develop and refine designs based onfeedback from stakeholders, including customers, sales teams, and productionteams.

Product Line Management: Manage product lines, includingcreating new designs, updating existing designs, and ensuring product lines arealigned with company goals.

Collaboration: Collaborate with cross-functional teams,including production, sales, and marketing, to ensure designs meet productionand sales requirements.

Trend Research: Research and analyses jewellery trends,competitor activity, and customer preferences to inform design decisions.

Design Standards: Ensure designs meet company quality anddesign standard.

Market Research: Conduct market research to identify trends,opportunities, and threats, informing design decisions.

Competitor Analysis: Analyse competitoractivity, identifying strengths, weaknesses, and opportunities fordifferentiation.

The Radiographer is responsible for the providing prompt diagnostic imaging services to the patient, ensuring patient safety and proper care of equipment. Assist Centre In-charge/ Senior or Principal Radiographer to guide and supervise junior and student radiographers when required.

Job Responsibilities:

• Perform general radiographic examinations and/or at least one of the area of specialty including mammography and/or ultrasound and/or Bone Mineral Densitometry.
• Responsible for the safety and welfare of the patient.
• Maintain a clean and safe environment; adhere to safe work practices especially in radiation safety and infection control.• Ensure proper usage and care for all equipment at the specific diagnostic centre.
• Perform other administrative duties or ad-hoc quality departmental projects/activities as assigned by the reporting officer/ Lead Radiographer
• Apply the ALARA principle for all procedures.
• Responsible for general housekeeping of the allocated diagnostic centre.
• Render prompt and courteous service delivery to external and internal customers.
• Ensure efficient running and operations of their area of responsibility.
• Assist the Radiographer-In-Charge / Senior or Principal Radiographer to ensure quality control procedures are performed diligently.
• Ensure AHPC certification is achieved after one / two years depending on qualification(s).

Job Requirements:

Required Skills and Experience
• Recognized degree in Diagnostic Radiography.
• Professional Licence: R1 license with Centre for Radiation Protection and Nuclear Sciences, National Environment Agency.• Timely update and renewal of RI license.
• Registration with Allied Health Professions Council.
• Excellent written and verbal communication skills.
• Strong organisational skills and able to multi-task in a fast-paced environment.
• Participate in continuous medical education and quality assurance programs as directed by Radiographer In-charge / Senior or Principal Radiographer.
• Complete all assigned tasks in an organized and timely manner.
• Service orientated and customer focused. Have a compassionate, caring and friendly attitude.
• Able to work in a fast-paced environment and under pressure.
• Effective communications and coaching skills.
• Good team player.

Preferred Skills and Experience
• Mammography and ultrasound experience preferred.
• Ability to communicate in vernacular languages• Knowledge of basic programming and advanced applications of MS Word, Excel and PowerPoint will be an added advantage.
• Knowledge of NGEMR, Epic usage and RISPACS would be an additional advantage.

(Please note that the working hours is on 5.5 days' work week) 

• German MNC
• Salary: Up to $3,000 Basic + OT allowances + Variable Bonuses
• 5-day week Monday to Friday, office hours 9 am to 6pm
• Working location: Loyang

Responsibilities:

• Manufacturing of chemical products in accordance with the weekly production schedule

• Ensuring availability of all raw materials and packing materials before commencement of weekly production

• Ensuring all raw materials are correctly identified and accounted for

• Maintain housekeeping in the production and area in accordance with the ISO, EHS for Safety and other Governance requirement.

Requirement:

• At least N/O level

• Nitec in Chemical process or equivalent will have advantage

• Required to Wear Personal Protective Equipment as per company policy

• Experience with Chemical production will have advantage

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to

roy.yeo@peopleprofilers.com

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Tel:  65 6950 9757

• Remuneration package: Up to $3,000 Basic + Shift Allowance + AWS + Excellent Variable Bonus

• Working location: Orchard Office Building

• Renowned Organization

Responsibilities

• Carry out general building repairs, including electrical, plumbing, and painting works, with the ability to read and interpret technical drawings such as electrical, plumbing, and site plans.

• Perform daily safety inspections to identify electrical hazards, water ponding, and coordinate with security personnel to ensure a safe environment.

• Support both preventive and ad-hoc maintenance activities to ensure facilities remain in optimal condition.

• Monitor Mechanical & Electrical (M&E) systems, maintain accurate records of readings, and track equipment performance.

• Assist in supervising external contractors during maintenance and servicing works, reporting any issues or irregularities to the site manager.

Requirement

• At least 2 years of relevant experience in M&E Maintenance of buildings

• Ok to do staggered working hours

We regret that only shortlisted candidates will be notified

Kindly email your resume in a detailed Word format to

roy.yeo@peopleprofilers.com

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

50 Raffles Place, #19-12, Singapore Land Tower, Singapore 048623

EA License Number: 02C4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Tel: 6950 9757

No experience welcome, on job training provided

Responsibilities

• Manage the overall operation, maintenance, reliability, andcontinuous improvement of security systems in the data centre environment,including CCTV, access control, intrusion alarm, intercom, visitor management,and associated monitoring platforms etc
• Develop and implement Planned Preventive Maintenance (PPM)schedules for security systems and ensure all activities are carried out inaccordance with manufacturers’ recommendations, site security procedures,workplace safety requirements, and contractual obligations.
• Lead fault response, troubleshooting, and recovery forcritical security system failures with timely escalation during criticalincidents.
• Review system health, asset condition, lifecycle risks,firmware/software support status, and obsolescence concerns, and recommendrepair, replacement, upgrade, or migration plans to maintain system integrityand resilience.
• Coordinate with relevant stakeholders to ensure securitysystem works are executed without compromising site operations, uptime, safety,or compliance.
• Plan and manage installation, expansion, upgrading, andA&A works for security systems, including design review, technicalsubmittals, testing and commissioning, method statements, MOPs, and as-builtdocumentation.
• Work closely with vendors and contractors on specialistmaintenance, breakdown rectification, software support, spare strategy,warranty claims, and service performance, ensuring timely response andcompliance with SLA/KPI requirements.
• Prepare incident reports, technical findings, root causeanalysis, and corrective action plans for security-related faults, systemoutages, unauthorized access events, and operational deviations.
• Manage inventory of critical spares, consumables, tools,licenses, and support subscriptions required for continuous operation of thesecurity systems in a mission-critical environment.
• Participate in audits, client reviews, emergency drills, andsite inspections, ensuring security systems and related work activities complywith data centre house rules, permit-to-work requirements, cybersecuritycontrols, and the highest prevailing market standards for safety andoperational discipline.
• Supervise security system technicians and service partnersonsite, ensuring work quality, documentation, housekeeping, safe workpractices, and adherence to approved RAMS, PTW, LOTO, and site accessrequirements.
• Provide 24/7 technical support and leadership during majorincidents affecting physical security systems that may impact site operations,regulatory compliance, or customer confidence.

Requirements

• Degree/Diploma in Electrical Electronic Engineering/Mechatronics, with at least 3 years of relevant experience in security systems,preferably in data centre, critical facility, or high-security environment.
• Strong understanding of CCTV, access control, intrusionalarm, structured cabling, controller architecture, software configuration, andintegration with network or building systems.
• Able to interpret drawings, single-line schematics, devicelayout plans, cause-and-effect logic, technical manuals, and method statementswith high level of accuracy and attention to detail in execution anddocumentation.
• Familiarity with data centre operational discipline, criticalenvironment change control, incident escalation, and service continuityexpectations.
• Knowledge of workplace safety requirements, permit-to-workcontrol, work at height, lock out/tag out, and safe execution in liveoperational environments.
• Certificationin workplace safety (eg. WSQ, WSH) and security-system-related training will be an advantage.

Primary services include hardware maintenance, installation, basic software support (inhouse training provided)

Manage customer incidents as assigned; Build working relationships with customers (end user).

Responsible for ownership of all customer issues/needs that are voiced or observed and acts appropriately;

Verify that the site environment meets the requirements prior to installation or rollout; Install customer systems according to the installation plan, certify that the installation or setup of the product meets the customer's requirements

Analyze and correct all technical problems on equipment within assigned customer accounts.

Perform periodic preventive maintenance routines on products and installs modifications to equipment.

Routine jobs to overhauls and maintenance repair. May also perform required modular swaps and unit replacements or perform preventative maintenance services

Responsible to response to a customer call on time and to keep customer informed during the problem resolution process. Perform service verification and customer satisfaction surveys relating to the situation

Responsible for capturing detailed customer asset information and other data required to complete any invoicing or billing activities

• Apply knowledge of welding codes and standards to ensure compliance and safety during welding operations
• Inspect welds for quality and accuracy, maintaining high attention to detail throughout the welding process
• Collaborate effectively with team members or work independently to complete welding tasks on schedule
• Maintain a safe work environment by following safety protocols and procedures during all welding activities

A Food Production technician is responsible for preparing and processing foods, ensuring that production meets quality standards and is delivered in a timely manner. Duties include operating small kitchen equitments like Mixer Grinder, Deep Frier, Buy Electric Cookers, packing and monitoring product quality.

A food production technician is need to prepare and package foods according to the company's standards. Food production workers may also be responsible for maintaining a safe and hygienic working environment, following food safety regulations and ensuring products meet food safety requirements.

Duties and Responsibilities

• Assist with the preparation of food items

• Ensure the kitchen and production area are kept clean and tidy

• Check ingredients and food products for quality

• Package food items ready for sale

• Follow food safety regulations and health codes

• Preparing ingredients for the shift; washing vegetables, chopping, seasoning meat, etc.

• Preparing deep fryer, utensils, and grill for shift

• Roti prate flour mixing

• Ready to cook Goring items (nasi,ikanpils,mee,kwithya,noodles)

• preparation of south indian & north indian curies

• Cooking order according to food health and safety standards

• Delivering food order to wait staff in a timely manner

• Storing all food properly

• Sanitizing and cleaning work stations and utensils

• Reordering stock and food supplies

• Monitoring other cooks and team members

Requirements and Qualifications

• Ready to work any shift

• Able to work in a fast-paced environment

• Able to multitask, prioritize, and manage time efficiently

• Physical endurance to stand for an entire shift

• Self-motivated and self-directed

• Works well as part of a team and on individual tasks

• Able to quickly memorize complex or multiple orders

• Degree or Diploma or minimum three years relevant work experience

• Able to work early mornings, nights, and weekends

A Food Production technician is responsible for preparing and processing foods, ensuring that production meets quality standards and is delivered in a timely manner. Duties include operating small kitchen equitments like Mixer Grinder, Deep Frier, Buy Electric Cookers, packing and monitoring product quality.

A food production technician is need to prepare and package foods according to the company's standards. Food production workers may also be responsible for maintaining a safe and hygienic working environment, following food safety regulations and ensuring products meet food safety requirements.

Duties and Responsibilities

• Assist with the preparation of food items

• Ensure the kitchen and production area are kept clean and tidy

• Check ingredients and food products for quality

• Package food items ready for sale

• Follow food safety regulations and health codes

• Preparing ingredients for the shift; washing vegetables, chopping, seasoning meat, etc.

• Preparing deep fryer, utensils, and grill for shift

• Roti prate flour mixing

• Ready to cook Goring items (nasi,ikanpils,mee,kwithya,noodles)

• preparation of south indian & north indian curies

• Cooking order according to food health and safety standards

• Delivering food order to wait staff in a timely manner

• Storing all food properly

• Sanitizing and cleaning work stations and utensils

• Reordering stock and food supplies

• Monitoring other cooks and team members

Requirements and Qualifications

• Ready to work any shift

• Able to work in a fast-paced environment

• Able to multitask, prioritize, and manage time efficiently

• Physical endurance to stand for an entire shift

• Self-motivated and self-directed

• Works well as part of a team and on individual tasks

• Able to quickly memorize complex or multiple orders

• Degree or Diploma or minimum three years relevant work experience

• Able to work early mornings, nights, and weekends

Responsibilities:

• Create 2D & 3D drawings using AutoCAD/Inventor.
• Design visualisation is preferred
• Collaborate with engineers to translate concepts into manufacturable designs.
• Provide feedback on engineering standards and policies.
• Participate in site surveys and update the drawings

• Liaise with project in charge to consolidate drafting requirement
• Assist in engineering related documentation/administration and any other duties as assigned from time to time.
• Lead and work with project teams on drawings and documents for issuing and filing

Requirements:

• Diploma in Engineering preferred.
• Strong drafting and CAD skills.
• Familiarity with semiconductor tooling and machining processes.
• Attention to detail and documentation accuracy.
• Able to start work immediately is an advantage.

Position Summary:
Support Adhesive R&D scientists in development, testing, and scale-up of new adhesive products.

Responsibilities:
Preparation of developmental samples.      Developmental product performance testing and data reporting. Laboratory equipment operation and maintenance.       Chemical storage and inventory, lab consumables management. Collects, organizes, and reports data and conclusions in WORD, EXCEL, and PowerPoint formats, utilizing appropriates charts and tables. Issues professional, formal reports upon completion of projects. Chemical list, sample list, and evaluation data, customer test feedback management, and documentation. Works safely and wears personal protective equipment in required areas. Assigned lab hands-on work.

Skills/Qualifications: ITE, Diploma in chemistry, chemical engineering, technology or science related.
Familiar with chemicals and raw materials handling.     0~3 years’ relevant experience in coating paint or adhesive industry is an advantage Strong attention to details and problem solving abilities. Able to carry equipment and raw materials up to 20kg.