Total 11 Senior Executive level Maintenance / Repair / Technician job vacancies

Purpose of the Job:

• Conduct engine disassembly from modular level to piece part level, inspect and clean engine piece parts and hardwares, re-assemble engine for testing.
• Perform assembly or disassembly work at section level to meet production schedule.
• Upkeep & maintain assigned equipment, tooling and fixtures
• Support and participate in EHS and Continuous Improvement initiative

Key Job Accountabilities:

• Ensure all maintenance activities are conducted in accordance to engine manuals, approved technical data and regulatory requirements
• Ensure strict compliance to all EHS regulations
• A team player with effective communication/ interpersonal skills
• Ability to support overtime production work on ad-hoc basis as and when necessary

Required Experience and Qualifications:

• NITEC or Diploma in Mechanical Engineering or Aeronautical & Aerospace Technology
• At least 2 years’ work experience in disassembly/assembly/inspection in aviation industry
• Prior aviation experience in engine MRO facility will be an added advantage
• Technical skills in lock-wiring, torque application and manual interpretation required
• Training provided for candidate without prior work experience

Responsibilities:

• Facility Operations: Oversee daily operations across multiple sites, including M&E systems, HVAC, fire protection, lifts, utilities, cleaning, and grounds. Coordinate service providers, track preventive and corrective maintenance schedules, and ensure timely resolution of facility requests and incidents with proper documentation.

• Compliance & Safety: Support compliance with statutory and regulatory requirements by maintaining records, coordinating inspections, and preparing audit documentation. Assist in safety drills, emergency preparedness, and incident follow-up, escalating risks or non-compliance promptly.

• Vendor & Contract Management: Coordinate key service providers such as security and cleaning, while supporting administration for outsourced vendors (M&E, pest control, waste, landscaping). Monitor SLA/KPI performance, track service reports, and escalate recurring issues. Assist with cost administration, including quotations, spend tracking, and invoice verification.

• Projects & Fit-Out: Provide support for facility improvement works, minor fit-outs, and asset replacements. Coordinate schedules, liaise with landlords and consultants, and ensure smooth handovers with proper defect management. Assist with budgeting and reporting for minor works.

• Sustainability & Continuous Improvement: Contribute to sustainability initiatives such as energy monitoring, waste segregation, and utilities tracking. Prepare routine facilities reports (response times, SLA updates, utilities, incidents) to support governance. Identify opportunities for process improvements and assist in implementing enhancements to service delivery and user experience.

Requirements

• Experience: 1–3 years in facilities operations, building services, workplace support, or vendor coordination. Exposure to outsourced services and maintenance coordination is an advantage.

• Education & Certification: Diploma (or higher) in Facilities Management, Building Services/Engineering, or related field. Fire Safety Manager (FSM) certification is mandatory.

• Skills & Competencies: Basic knowledge of M&E/HVAC/fire safety systems, contractor coordination, and documentation. Comfortable with reporting tools (Excel/trackers) and compliance requirements.

• Work Attributes: Hands-on, customer-oriented, proactive, organized, and calm under pressure. Strong follow-up skills, able to work with multiple stakeholders, and eager to learn and improve processes.

Responsibilities

• Inspect and examine aircraft components for leaks, cracks, breaks or other issues
• Read and utilize blueprints, maintenance manuals, ATA codes, illustrated parts catalogues, service bulletins and other maintenance documents to troubleshoot and complete work assignments
• Maintain, repair, and rebuild aircraft structures, functional components, and parts such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, gaskets, and seals
• Perform routine maintenance operations, such as the replacement of equipment’s and aircraft components
• Modify aircraft structures, space vehicles, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications
• Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities
• Perform hourly, daily and monthly inspections to check for cracks, oil leaks, burned areas, foreign object damage, warping, distortions, missing segments and wear
• Complete all tasks in the allotted time frame and to the quality standards of our company, our customers and the FAA
• Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns
• Order supplies, equipment, materials and parts for repairs and general maintenance
• Keep detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts.

Requirements

• Min NITEC/Higher NITEC/Diploma in Aeronautical Engineering or equivalent OR
• NITEC/Higher NITEC/Diploma in Engineering with relevant Aerospace experience
• Singaporeans only

Job Responsibilities

·       Perform the task of cleaning aircraft interior and exterior parts during periodic overhauls (home interior maintenance).

·       Maintaining the interior cleanliness in the aircraft

·       Changes lighting systems and repairing entertainment systems, seat electrical systems.

·       Comprehensive knowledge of aircraft cleaning operations and activities as well as facility maintenance

·       Perform the task of removing and cleaning curtains, discarding waste from the seats, and adjusting bulkheads

·       Ability to perform the given tasks in high noise areas and at great heights

·       Maintenance and repairing of aircraft cabins

·       Maintain luggage storage area in a neat and organized manner

·       Maintain inventory items required for handling the cleaning activities.

·       Install cabin interior components into commercial aircraft including seat tracks, overhead bins, galleys, side panels, bulkheads, etc.

·       Maintain the quality of the aircraft interiors on the operated fleet.

·       Maintain the interior and exterior cleaning standards on the operate fleet.

Job Requirements

• Minimum Diploma in engineering, preferably in Aerospace or relevant certificates.
• At least 2 years of working experience in the aviation industry
• Mechanically and electrically trained (maintenance)

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported revenue of over $12b in 2025 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Best-in-Class Asia Pacific Index

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Description

• Performs removal, installation, servicing , operational test and troubleshooting of aircraft system in mechanical trade
• Performs and documents all work performed per appropriate manuals and regulations as required

Requirement

• O level and above, with at least 2 year of relevant experience in the aerospace industry
• Ability to read mechanical engineering drawings
• Ability to effectively communicate in both written and verbal form on individual and / or aircraft status

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported revenue of over $12b in 2025 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Best-in-Class Asia Pacific Index

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Details

• Maintenance and servicing of avionics systems per customer's requirements.
• Carry out component changes.
• Assist engineers in trouble-shooting and rectification
• Assist in installing and servicing avionics communications equipment.
• Inspect and test the electrical and computer systems that allow aircraft to function.
• Oversee airplane's radar system, radio communications equipment and the flight controls.
• Removal, assemble and install electrical components, and keep detailed written records of repair work performed on aircraft. (E.g. Main Battery, Emergency Battery, Starter Generator, ACW Generator, GCU, BPCU, etc.)
• Removal and installation of engine and propeller electronic controls.
• Performs components changes, tests, and adjustments on aircraft electrical avionics systems consistent with the quality standards.

Job Requirements

• Minimum O level and above, with at least 3 year of working experience as an avionics technician in the aviation industry
• Good team member with strong interpersonal skills.
• Mechanically and electrically trained on Avionics systems

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported revenue of over $12b in 2025 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Best-in-Class Asia Pacific Index

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

• General electrical fitting work including installation of electrical equipment, electrical cabling works, cable trucking, cable conduit and termination, etc
• Maintenance of M&E equipment
• Troubleshooting of electrical system
• Troubleshooting and repair works for air conditioning system (Single Split, Multi Split & VRV)
• Installation of air conditioning system
• On-site maintenance of Air-con and MV system
• Preparation of service reports
• Attending urgent calls during & after office hours
• Any duties as assigned by supervisor

JOB REQUIREMENTS

• Minimum 2 years hand-on experience in maintenance, troubleshooting and installation in electrical systems
• Must be able to install GI trunking and conduits works.
• Minimum 2 years hand-on experience in maintenance, troubleshooting and repair works in ACMV system
• Must have knowledge of Air-con DX system and Chilled water system.
• MUST have Coretrade certificate.
• Basic maintenance knowledge of M&E systems.
• Valid class 3 driving licence is preferred.
• Working location: Island-wide Singapore
• Working hours: Monday to Saturday (8:30 am to 5:30 pm)

Company Overview:

SerayaEngi is a company in Singapore specializing in gas detection, control and automation, water quality monitoring, and wastewater sampling solutions. We are committed to providing innovative and sustainable solutions to meet the evolving needs of our clients. As we continue to grow, we seek a dedicated and skilled Senior Technician (6-12 Months Contract) to join our team.

Job Responsibilities:

• Attend site jobs to service and maintain gas detection systems, water monitoring instrumentation, and wastewater autosamplers.
• Perform in-house repairs and calibrations for returned gas detectors.
• Efficiently manage and issue service reports, ensuring accurate bookkeeping.
• Maintained workshop cleanliness and ensured materials were tidy and organized post-job completion.
• Work flexibly to meet customer needs, including early site visits or extended hours for urgent tasks.

Requirements:

• Minimum ITE in Engineering or a related field.
• Proficiency in English and strong computer skills, including Microsoft Office Suite (Outlook, Excel, Word).
• Ability to work independently with minimal supervision, demonstrating problem-solving skills and initiative.
• Commitment to maintaining a clean and organized work environment.
• Flexibility in work hours to accommodate early site visits or extended hours as needed.

Working Hours:

• Monday to Friday, 8:00 AM to 5:00 PM.
• Rest days: Saturday and Sunday.
• Note: Business needs may require flexibility in working hours.

Application Process: Interested candidates should submit their resume and a cover letter highlighting their relevant experience and why they are a good fit for this position.

SerayaEngi is an equal-opportunity employer, and we encourage applications from all qualified individuals.

As a Senior Engineer, Instrumentation & Controls for the Global Facilities Engineering department at Micron Technology, Inc., you will be responsible to provide Engineering system ownership and technical support for the planning, design, construction, operations, and maintenance programs of the critical Facilities systems. In this role, you will support the Micron Semiconductor Manufacturing sites across the network, including Facilities and Manufacturing teams, through all phases of design, construction, installation, start-up, operations and maintenance with focus and emphasis on Global Standardization and Alignment, Innovation, Reliability and Performance, and Sustainability.

The Facilities system ownership and responsibilities include for the I&C, FMCS, SCADA, Life Safety Systems, Toxic Gas Monitoring, Telecom, and Security systems, as well as the Controls interfaces with other Facilities Mechanical, Electrical, Process, and Building systems.  This role will also lead the Facilities Digitalization and SMART Facilities program initiatives.

Provide Technical Support, Leadership, and Expertise

• Provide consultation and support to Global, Regional, and Site Facilities and Manufacturing teams as the Technical Field Domain Expert.

• Collaborate with internal partners and collaborators including Technology Development Team, Procurement, Finance, Legal, etc.

• Analyze system designs to identify improvements that will result in better performance, efficiency gains, reduced maintenance, and cost savings

• Support sites with problem analysis using standard tools and methodologies as requested

• Benchmark within and external to Micron sites on Engineering Best Practices and Best Known Methods (BKM) of Facilities buildings and systems

• Maintain technical knowledge domain expertise on your respective subject area including for Industry Standards and Best Practices, Trends and Technological advances, emerging technology roadmap, Design Innovations, Sustainability, Digitalization, etc.

Provide Design and Construction Project Support, Leadership, and Expertise

• Support the Micron Global, Regional, and Site Design and Construction project teams in the Engineering and Design development for new large-scale, Facilities Infrastructure Expansion projects

• Develop, review, and maintain the Micron Global Design and Construction Standards and Construction Specifications with focus and emphasis on Engineering Design and Construction of your respective systems.

• Develop the system design concepts for your respective field systems to be deployed into the Design and Construction Projects, including for Control System Architecture, System P&IDs, Sequence of Operations, and Functional Description of System Operations

• Ensure that project scope meets customer and requestor needs

• Ensure appropriate communication and collaboration with Facilities, Design, Construction, Procurement and Manufacturing stakeholders, to deliver project objectives and results

• Perform timely review of design packages and providing documented comments and feedback as necessary.  Ensure designs are in compliance with all standards, codes, and regulations

• Monitor progress and provide Engineering and Design support during construction projects

• Provide support for project cost and schedule estimates and justification for approval

• Provide supervision and coordination of Consultant resources 

• Review capacity planning databases and system operating trends across the network and validating utilization and diversity factor assumptions

• Participate and/or lead capacity and scenario planning across the network, including evaluation of system and distribution capacity impacts based on scenario changes

• Review and advise on scope, schedule, and cost estimates for Facilities infrastructure additions or modifications

Provide Global Initiatives Program Support, Leadership, and Expertise

• Develop, review, and maintain Micron Global Best Known Methods (BKM) documents with focus and emphasis on Operations and Maintenance Reliability and/or Performance

• Lead & own the Global Facilities Programs & Initiatives, including establishing and defining the program objectives, roadmaps, and high-level implementation plan

• Lead the Global Facilities Digitalization and SMART Facilities Programs in support of Micron’s Corporate Digitalization goals and initiatives

• Lead the Global Facilities Sustainability Programs in support of Micron’s Corporate Sustainability goals and initiatives

• Collect and consolidate Lessons Learned and feedback from Micron Global, Regional, and Site teams to incorporate into the Micron Global Standards and BKMs

Job Requirements:

• Bachelor’s Degree in Mechanical, Electrical, Chemical, or Industrial Engineering required

• Minimum 7 to 10-years experience in Semiconductor and/or Facilities related industry

• Technical expertise, knowledge, and experience on Facilities and Semiconductor Instrumentation and Controls systems, including I&C, FMCS, SCADA, Life Safety Systems, Toxic Gas Monitoring, Telecom, and Security systems, as well as the Controls interfaces with other Facilities Mechanical, Electrical, Process, and Building systems

• Ability to prioritize and schedule workload and work on multiple tasks concurrently

• Good organizational skills and Service demeanor

• Excellent interpersonal skills and good team working skills, English Required

• Self-motivated worker

• Familiarity with Semiconductor Manufacturing and Facilities systems

• Ability to travel internationally 15-25% of the time on average, but up to 30% of the time during Critical Project phases or Site Activities

Requirements

• Candidate must possess EMA Electrical Worker Licence namely Electrician's Licence (EMA LEW Grade 7), Electrical Technician's Licence (EMA LEW Grade 8).
• Candidate must possess at least Nitec education.
• Preferably LEW specialized in electrical work or electrical installation.
• Preferably at least 2 year(s) of working experience.
• Able to start within a short notice and or immediate
• Preferably experienced in Facilities Management environment.

Responsibilities

• Able to lead a team of technicians for troubleshooting works
• Able to coordinate A&A works independently.
• Coordination with clients and contractors. A&A etc.

Company Overview / Employee Value Proposition

ST AEROSPACE ENGINES PTE LTD

Job Summary

Lead technical functions for engine and product repairs, driving quality improvements and process innovations within Engines MRO environment. Collaborate with authorities and stakeholders to ensure compliance and operational excellence.

Responsibilities

• Lead repair engine products/platform technical functions to ensure effective maintenance and quality outcomes
• Provide technical support by resolving manual discrepancies and proposing out-of-manual repair solutions for mature repairs
• Review and interpret publications from OEMs and customers (ESM, SB, IC, industrial specifications) to maintain repair standards
• Design, review, and manage RFQ processes for production repair fixtures, jigs, and tools to optimize repair operations
• Conduct tooling and consumable equivalency reviews to validate repair resources
• Perform First Article inspections on new repairs to verify compliance and readiness
• Execute capability setup and declaration for new repairs, equipment, or processes for regulatory submission
• Draft and amend technical worksheets to document repair procedures accurately
• Lead or assist investigations into engine/product quality failures by conducting root cause analysis and implementing corrective and preventive actions
• Manage repair special processes, providing technical support to resolve repair or process quality issues related to equipment, parameters, or manuals
• Review process-related publications from OEMs and customers (ESM, SPM, IC, industrial specifications) to ensure process compliance
• Generate and govern process parameters and identify improvements to drive cost savings and efficiency
• Maintain and control in-house process specifications to uphold quality standards
• Prepare maintenance procedures (FMM) for new equipment to ensure operational reliability
• Develop aviation Hazard Identification and Risk Assessments (HIRA) for new processes to mitigate risks
• Lead or assist investigations into process quality failures or industrial accidents by performing root cause analysis and following up on corrective and preventive measures
• Liaise with regulatory authorities (e.g., NEA) to ensure process requirements are met and maintained

Required competencies and certifications

• Degree in Mechanical, Aerospace, or Aeronautical Engineering
• Knowledge of FAA 45 / EASA 145 regulations
• Understanding of regulatory NDT requirements

Preferred competencies and qualifications

• Min. 3 to 5 years of experience in Propulsion Engines and Components MRO environment
• Strong fundamentals in engineering drawing interpretation
• Understanding of repair processes
• Strong analytical, communication, and interpersonal skills
• Demonstrated high degree of initiative