Total 393 Manufacturing / Production job vacancies

Technical Leadership & Strategy

• Set technical direction for CPIE initiatives in UE_ROW, quality indices, Frontend–PTS integration, and high‑value bits (PG2+) yield, aligned to business priorities and technology roadmaps.
• Architect new data solutions, methodologies, and frameworks to:
• Identify and prioritize yield, quality, and reliability improvement opportunities across process, test, and design
• Model, monitor, and benchmark tool performance and process capability at scale

• Enable equipment prognostics and advanced process integration optimization

• Define test and screening optimization strategies that materially improve product grade yield without quality escape

• Drive end‑to‑end problem solving on complex, cross‑module issues that cannot be addressed within a single function or site.

Cross‑Functional & Organizational Influence

• Partner deeply with Process & Equipment Engineering, Manufacturing (MFG), Product Integration Engineering (PIE), and Data Science (DS) teams to:

• Establish feasibility and technical soundness

• Quantify business impact

• Rapidly prototype and mature solutions

• Act as a technical integrator across Global Quality (GQ), Product Engineering (PE), Central PEE (CPEE), Smart Manufacturing AI (SMAI), Technology Development (TD), and suppliers, ensuring solutions are scalable, manufacturable, and production‑ready.

• Influence technical and strategic decisions beyond direct ownership, including across sites, nodes, and organizations.

Execution, Scale, and BKM Deployment

• Lead the development, validation, and global deployment of BKMs, ensuring sustained performance and learning‑rate acceleration.

• Balance long‑term architectural thinking with near‑term execution, driving measurable improvements in yield, quality, and cycle time.

• Anticipate risks and tradeoffs (technical, schedule, cost, quality) and provide clear decision frameworks for leadership and stakeholders.

• Support global engineering teams, including engagement across time zones and non‑standard hours when required.

Collaboration & Leadership Expectations

• Function as a go‑to expert and mentor within CPIE and the broader FE engineering community.

• Lead by influence rather than authority, enabling alignment across diverse technical disciplines.

• Champion continuous improvement in systems, methods, tools, and skill sets to keep Micron best‑in‑class.

• Demonstrate a strong growth mindset—continuously learning, unlearning, and evolving technical approaches.

Communication

• Communicate complex technical concepts clearly and concisely to both technical and executive audiences.

• Produce high‑quality written artifacts (technical proposals, design reviews, decision memos).

• Represent CPIE effectively in cross‑org reviews and executive forums.

• Willing to travel as needed to support global objectives.
  

  Requirements & Technical Competency

  • PhD, Master’s, or Bachelor’s degree in Engineering or related discipline.

  • 8+ years of semiconductor industry experience, with deep exposure to product integration, process engineering, test solutions, product engineering, or circuit design.

  • Recognized depth in semiconductor manufacturing processes, equipment, and control systems.

  • Strong proficiency in data analysis and modeling tools (e.g., Y3, JMP, Python).

  • Demonstrated application of statistical methods and/or machine learning to real manufacturing problems.

  • Proven track record of technical leadership, decision‑making, multi‑tasking, and root‑cause resolution on ambiguous problems.

Technical Leadership & Strategy

• Set technical direction for CPIE initiatives in UE_ROW, quality indices, Frontend–PTS integration, and high‑value bits (PG2+) yield, aligned to business priorities and technology roadmaps.

• Architect new data solutions, methodologies, and frameworks to:

  Identify and prioritize yield, quality, and reliability improvement opportunities across process, test, and design

  Model, monitor, and benchmark tool performance and process capability at scale

  Enable equipment prognostics and advanced process integration optimization

  Define test and screening optimization strategies that materially improve product grade yield without quality escape

• Drive end‑to‑end problem solving on complex, cross‑module issues that cannot be addressed within a single function or site.

Cross‑Functional & Organizational Influence

• Partner deeply with Process & Equipment Engineering, Manufacturing (MFG), Product Integration Engineering (PIE), and Data Science (DS) teams to:

• Establish feasibility and technical soundness

• Quantify business impact

• Rapidly prototype and mature solutions

• Act as a technical integrator across Global Quality (GQ), Product Engineering (PE), Central PEE (CPEE), Smart Manufacturing AI (SMAI), Technology Development (TD), and suppliers, ensuring solutions are scalable, manufacturable, and production‑ready.

• Influence technical and strategic decisions beyond direct ownership, including across sites, nodes, and organizations.

Execution, Scale, and BKM Deployment

• Lead the development, validation, and global deployment of BKMs, ensuring sustained performance and learning‑rate acceleration.

• Balance long‑term architectural thinking with near‑term execution, driving measurable improvements in yield, quality, and cycle time.

• Anticipate risks and tradeoffs (technical, schedule, cost, quality) and provide clear decision frameworks for leadership and stakeholders.

• Support global engineering teams, including engagement across time zones and non‑standard hours when required.

Collaboration & Leadership Expectations

• Function as a go‑to expert and mentor within CPIE and the broader FE engineering community.

• Lead by influence rather than authority, enabling alignment across diverse technical disciplines.

• Champion continuous improvement in systems, methods, tools, and skill sets to keep Micron best‑in‑class.

• Demonstrate a strong growth mindset—continuously learning, unlearning, and evolving technical approaches.

Communication

• Communicate complex technical concepts clearly and concisely to both technical and executive audiences.
• Produce high‑quality written artifacts (technical proposals, design reviews, decision memos).
• Represent CPIE effectively in cross‑org reviews and executive forums.
• Willing to travel as needed to support global objectives.

Requirements & Technical Competency

• PhD, Master’s, or Bachelor’s degree in Engineering or related discipline.

• 8+ years of semiconductor industry experience, with deep exposure to product integration, process engineering, test solutions, product engineering, or circuit design.

• Recognized depth in semiconductor manufacturing processes, equipment, and control systems.

• Strong proficiency in data analysis and modeling tools (e.g., Y3, JMP, Python).

• Demonstrated application of statistical methods and/or machine learning to real manufacturing problems.

• Proven track record of technical leadership, decision‑making, multi‑tasking, and root‑cause resolution on ambiguous problems.

• Provide support for operational and technical activities
• Machine & Equipment maintenance / calibration
• Establish SOP and machine manual to provide comprehensive servicing and maintenance programmes
• Identify areas of process improvement and automation to implement work improvement programmes to achieve desired machine efficiency and reject rate
• Plan, evaluate and improve technical/engineering projects for cost and productivity
• Implementation of industrial safety practice to ensure compliance
• Any other ad-hoc tasks as assigned

JOB REQUIREMENTS:

• Min Degree in Mechanical / Electrical Engineering or related discipline
• No experience needed, training provided

Office hours, Mon to Fi
Medical Device MNC

Interested candidates, please forward your resume to kevynhuang@recruitexpress.com.sg

Consultant: Huang Jingsheng Kevyn (R1333338)
Recruit Express Pte Ltd (99C4599)

About the role

We are looking for an experienced Production Engineer with a solid background in biopharmaceutical manufacturing. The ideal candidate is skilled in process validation, cGMP compliance, and continuous improvement within a regulated production environment.

Key responsibilities

• Provide technical leadership for production systems, ensuring compliance with SOPs and regulatory standards.
• Manage and revise SOPs, Batch Records, and related compliance documentation.
• Investigate non-conformances; lead CAPA and effectiveness check processes.
• Perform periodic revalidation of batch records, utilities, and cleaning validation.
• Initiate and manage Change Requests for continuous process improvements.
• Oversee production scheduling, workforce planning, and shift operations.
• Support IQ/OQ/PQ and requalification activities for critical equipment.
• Act as SME during regulatory audits and support audit-readiness activities.
• Lead Kaizen and Lean initiatives to drive productivity, quality, and safety improvements.
• Collaborate with QA, QC, Microbiology, and Engineering teams for production and compliance goals.

Skills & qualifications

• Degree/ITE/Diploma in Biotechnology, Life Sciences, or a related discipline
• Experience in aseptic processing, CIP/SIP, and cleanroom operations
• Proficiency in DCS systems and equipment commissioning
• Familiar with global regulatory audit requirements
• Proven shift team leadership and cross-functional collaboration

We appreciate your interest in joining our team. Only candidates shortlisted for interview will be notified

THE ROLE:

As a senior staff member of the product characterization team, you will evaluate the performance of AMD AECG products, develop, lead and characterize the next generation Memory Controller IPs.

THE PERSON:

• Strongly motivated individual from post-silicon validation background.
• Excellent communication and presentation skills, demonstrated through technical publications, presentations, training, executive briefings, etc.
• Adept at collaboration and mentorship skills to train and guide fellow engineers and elevate the skills of the team around you.

KEY RESPONSIBILITIES:

• Gain expertise into the AMD SoC architecture to characterize next generation Memory Subsystem (Controller, PHY and IO) for various supported protocols such as DDR4, LPDDR4, DDR5, LPDDR5, DDR6 and LPDDR6.
• Understand Pattern development nuances and guide the team for bench data collection and debug with lab instruments when necessary.
• Work closely with cross functional teams from design and firmware side to identify key new features, firmware stability and ensure proper test coverage for the same.
• Drive continuous improvement initiatives on automated test scripts and test frameworks for efficient data collection, test-time optimization and data analysis.
• Stay updated with the latest developments in Memory specifications and trends to inform product strategy and direction
• Statistical data analysis to post process volume results for data correlation across Process corners and outlier analysis.
• Responsible for isolating the issue to a specific area such as test gaps, SW bug, silicon bug, or process deviation using bench setup and instill good debug practices in the team.
• Drive cross-functional discussions to address the issues uncovered from debugs and collaborate for ensuring screens are in-place for gaps identified.

PREFERRED EXPERIENCE:

• Extensive years of experience into post-silicon validation with strong background on SoC validation and system level testing.
• Technical leadership experience leading a small group of senior engineers.
• Strong understanding of ARM SoC architecture and Memory protocols such as DDR5 and LPDDR5.
• Experienced on bench testing and debug skills with lab instruments usage.
• Proficiency in using test equipment such as oscilloscopes, logic analyzers and protocol analyzers.
• Experienced in Linux environment, data analysis and scripting languages (e.g. Python, Perl) for automation and data processing.
• Strong communication and leadership skills, including data presentation and ability to work well in a group environment that spans across continents.
• Experience with AMD/Xilinx Vivado and FPGA design flow is a plus.

ACADEMIC CREDENTIALS:

• BS in EE, CS, ECE or related field; MS preferred.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.) is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer/ Senior Engineer to be part of our Product Engineering Department diverse team of talent.

What you will be working on:

• Ensuring 1st time yielding silicon, benchmark D0 for baseline and products.
• Identify & resolve Product, Test & Fab-Process related yield limiters in shortest time possible.
• Technical interface with Business Lines/customers
• Driver for yield improvement
• Resolve product yield, quality and reliability issues
• Perform pre-tapeout risk assessment and communicate with Business line/Fab on the necessary actions to eliminate/minimize the risk.
• Work with Customers/Mother Fab on the DfM related issue.
• Conduct product yield analyses to identify root cause of wafer sort and final test failures
• Set up fault diagnostic capabilities for yield improvement
• Work with Business line/customers on product low yield disposition
• Perform electrical and physical failure analysis to isolate fail location
• Drive the yield improvement task force

More about you:

• Master/bachelor’s degree in electrical / Electronic Engineering or Science in Physics
• 2 – 8 years product and/or test engineering, failure analysis or process-integration experience
• Experience in Fab process, yield engineering or design will be an added advantage
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical & problem-solving skills
• Good interpersonal and communication skills

SSMC is firmly committed to upholding equal employment opportunities for all individuals. We strictly adhere to the Tripartite Guidelines on Fair Employment Practices (TGFEP), the Singapore Food Safety and Security Act 2025 (FSSA 2025), and the Singapore Code of Advertising Practice. All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Our vision is to transform how the world uses information to enrich life for all.  
 
Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. 

As part of the HIG HBM Product Engineering organization, you will help drive the development of next-generation GenAI, machine learning, and advanced data analytics solutions for semiconductor engineering. In this role, you will work on intelligent systems that improve engineering productivity, strengthen technical decision-making, and unlock insights from complex manufacturing, validation, and engineering workflows. 

You will collaborate with cross-functional teams across Product Engineering, Design Engineering, System Engineering, Data Science, IT, and Manufacturing to prototype, build, and scale practical AI-driven solutions that improve quality, cost, cycle time, and engineering efficiency. 

Key Responsibilities 

• GenAI System Development: Design, build, and improve GenAI-powered and agentic systems supporting semiconductor engineering workflows such as code generation, data extraction, analytics, documentation automation, failure triage, and technical knowledge retrieval.  

• Large-Scale Data Pipelines: Develop scalable data pipelines and analytical workflows to ingest, clean, transform, and analyze large, complex, and heterogeneous datasets from multiple manufacturing and engineering systems.  

• Advanced Data Analytics: Apply Python, SQL, and data science libraries (e.g., pandas, matplotlib) to perform deep analysis, generate visualizations, and deliver actionable engineering insights.  

• LLM Workflow Engineering: Build, evaluate, and optimize LLM-based workflows, including prompting, retrieval-augmented generation (RAG), inference orchestration, benchmarking, and quality evaluation.  

• Machine Learning Production: Develop and productionize machine learning and deep learning models for classification, regression, anomaly detection, failure analysis, and engineering decision support.  

• Distributed Data Processing: Implement robust data processing techniques such as data cleansing, outlier detection, and missing-data handling using distributed or large-scale frameworks (e.g., PySpark, BigQuery).  

• Cross-Functional Collaboration: Partner with domain experts and cross-functional teams to translate complex engineering problems into scalable AI/ML and analytics solutions.  

• Production Deployment: Support deployment, monitoring, and operationalization of AI/ML solutions in cloud and enterprise environments.  

• Technical Communication: Communicate technical findings, recommendations, and model outcomes clearly to both technical and non-technical stakeholders.  

• Innovation Leadership: Identify and drive high-impact opportunities where GenAI, machine learning, and analytics can improve engineering productivity and business outcomes. 

Minimum Qualifications 

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Science, Data Science, Statistics, Artificial Intelligence, or a related field. 

• Minimum 2 years of hands-on experience developing and deploying AI applications in semiconductors, electronics, or other engineering industries. 

• Strong programming proficiency in Python and SQL.  

• Strong technical foundation in data analytics and visualization, including tools and libraries such as pandas, scikit-learn, matplotlib, plotly, or similar ecosystems.  

• Familiarity with agentic AI frameworks such as LangGraph, Google ADK, AutoGen and evaluation tools like AgentEval. 

• Familiarity with modern AI coding tools / agentic coding harnesses, such as Claude Code, Roo Code, Cursor, Cline, Windsurf, Gemini CLI, or similar tools.  

• Hands-on experience developing and deploying AI/ML systems involving LLMs, including RAG, agentic workflows, and frameworks such as PyTorch or TensorFlow. 

• Cloud experience with GCP, AWS, or Azure, including deploying ML pipelines in production. 

• Experience with LLM training, inference, and evaluation workflows, including prompt design, benchmarking, validation, or retrieval-augmented systems.  

• Experience analyzing large, complex, and heterogeneous datasets from multiple systems and applying sound techniques for data cleansing, outlier handling, and missing-data treatment.  

• Strong analytical, problem-solving, and software development skills.  

• Strong communication skills with the ability to explain technical concepts and findings effectively.  

• Strong sense of ownership, accountability, and engineering rigor. 

Preferred Qualifications 

• Experience building agentic systems or AI solutions for semiconductor manufacturing, product engineering, validation, yield improvement, reliability, or failure analysis. 

• Deep understanding of semiconductor-specific AI/ML applications 

• Demonstrated understanding of deep learning architectures and computer vision.  

• Experience using enterprise data platforms such as BigQuery, Snowflake, MSSQL, Oracle, or Redshift. 

• Experience with Kubernetes or similar production infrastructure and deployment frameworks. 

• Experience with web application technologies such as JavaScript, HTML, and CSS.  

• Experience designing scalable, enterprise-grade AI/ML systems with attention to reliability, traceability, and operational readiness. 

• Familiarity with document-processing pipelines, technical knowledge platforms, or retrieval systems for engineering content. 

• Experience working in cross-functional environments spanning engineering, manufacturing, data science, and IT. 

As a key leader within High Bandwidth Memory (HBM) Product Engineering Media Health team, you will spearhead and develop a high performing team driving both intrinsic and extrinsic reliability test development and execution for Micron’s latest HBM products, both on DRAM and Interface die and a stacked product. Your responsibility is to drive extrinsic DPM reduction (Time 0 and Field DPM) and lead the intrinsic reliability charter, along with optimized Manufacturing Test Flow to meet critical KPI’s Quality, Cost and Cycle Time. You will be leading the team to characterize the products from reliability aspect, identify the reliability gaps, working on root cause and resolution of qual and RMA failures pertaining to defectivity and intrinsic reliability margin and drive fab process improvement driven by the qual failures. Additionally, your team will also be the key person in frontend process conversion, where you will work with Fab, TD, GQ teams to establish robust business process for process conversions to facilitate yield improvements, DPM and Cost Reduction. You will collaborate across functions within and outside of HBM to meet both strategic and tactical objectives while continually maximizing the effectiveness of the HIG HBM PE organization. The future of HBM are exciting and dynamics. Micron is seeking experienced individuals that find technical challenges engaging and invigorating.

Responsibilities:

• Reliability Test Flow Development: Define and develop reliability stress, test flows and test plans to cover all Product Reliability aspects.

• Reliability Test Plan and Execution: Work closely with Global Quality team to define qualification plan, review and manage the qualification execution progress, and drive for qualification gating issue resolution.

• DPM reduction: Drive down and achieving Extrinsic Reliability (Time 0 and Field DPM) and Intrinsic Reliability through Optimized Manufacturing Test Flows and Test Strategy to meet critical KPI’s Quality, Cost and Cycle Time

• Root Cause and Resolution of Qual and RMA Device Issues pertaining to defectivity and intrinsic reliability: Debug and identify root cause and failures in reliability tests by electric failure analysis(EFA) and Physical Failure Analysis (PFA) and drive for resolution and improvements through cross functional team collaboration.

• Process Conversions and HVM: The role involves providing recommendation to fab teams for new process conversions to reduce cost, increase yields. This is critical as it directly impacts the yield, quality, reliability, and performance of HBM products, which are key components in many modern technologies.

• Risk Management: The role requires communication with Product Managers/Leads to manage risks associated with DPM process conversions. This is crucial in ensuring that the conversions move at an appropriate pace, balancing the need for innovation with the need for stability and reliability.

• Promotion of Innovation: The role involves promoting innovation and driving for changes that will provide Micron with a technical advantage over its competition. This is vital for maintaining Micron’s competitive edge in the market.

• Mentorship and Development of Others: The role involves actively developing and mentoring others. This is important for the growth and development of the team and the organization.

• Project Management: Developing project management skills within the team ensures efficient execution of projects, leading to timely delivery of technological solutions.

• Technical Decision Making: The role involves making final decisions on risk analysis and project prioritization. These decisions directly impact the direction of technological development.

• Cross-Functional Collaboration: This role necessitates collaboration with various cross-functional teams such as Fab, HBM Technology Development, HBM Design, System Development, and Quality/Reliability team. This collaboration is vital for the holistic development and shipping of end products.

Requirements

• Bachelors/Masters Electrical and Electronics Engineering Degree with 3 years of experience in the semiconductor industry. Product Engineering experience is preferred.

• Demonstrating Strong Leadership Skills and Technical Skills, especially in problem solving with root cause understanding and solution space through in depth circuit analysis.

• Good knowledge of statistics and data analysis tools and scripting.

• Dedicated and highly motivated with a flexible approach towards adapting to different roles in a dynamic working environment (from leading the team to leading technical programs).

• Proven track record of collaborative work within/across teams to address sophisticated business and engineering problems.

• Strong sense of responsibility and accountability towards assigned role with professional work ethic.

• Excellent communication and presentation skills.

• Passionate about people leadership, with a drive toward ongoing learning and development in this area.

• Work on site in Singapore with international travel to US, Taiwan and Japan.

Responsibilities:

• Ideate, prioritize, and define requirements based on market and customer insights.
• Analyze trends, assess technology, and generate product concepts.
• Define competitive positioning and USP.
• Execute NPD plan within timelines, aligning Scrum teams via Agile.
• Source manufacturers, liaise with formulators, and ensure regulatory compliance.
• Conduct efficacy, safety, and stability tests with manufacturers.
• Finalize product specs, labels, and packaging with relevant teams.
• Research pricing, create costing data, and present to management.
• Provide technical support to Marketing and conduct product training.
• Monitor industry trends, competitor actions, and product performance.
• Manage product improvements and corrective actions with manufacturers.
• Ensure compliance with standards and support company goals with additional projects.

Requirements:

• Degree in Nutrition/ Chemistry/Pharmacy or equivalents.
• Minimum 1 year of experience in product development or management within dietary supplements or health food.
• Proficient in product/project management, with strong planning and time management skills.
• Resourceful, analytical, and effective at problem-solving.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact win@hkmsvs.com for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

JOB SUMMARY

The Engineer will support the Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.

Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Monitor and continuously improve daily quality/efficiency performance for assigned areas.

· Design and procure production tooling, processing equipment and workstations.

· Coordinate layout and workstation move activities.

· Prepares time estimates for proposed projects and evaluates time factors.

· Minimize change over time by ensuring programs use common set-ups where possible.

· Verify that machine maintenance is being performed on schedule.

· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.

· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.

· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

· Comply and follow all procedures within the company security policy.

· May perform other duties and responsibilities as assigned.

JOB QUALIFICATIONS

EDUCATION AND KNOWLEDGE REQUIREMENTS

· Bachelors Degree in Mechanical or Manufacturing from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.

· Preferably 3 years of relevant working experience but fresh graduate is also encouraged to apply.

· Key Requirements:

o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)

o Understanding of Jabil’s global strategies and direction

o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction

o Strong analytical ability

o Able to implement continuous improvements and cost reduction programs

o Good communication skills

· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.

Job Summary:
Coherent is currently hiring a Senior Manufacturing Engineer to work at our manufacturing site located in Singapore. We are looking for a hands-on candidate for our industry-leading laser technology products. The Manufacturing Engineer will be responsible for developing, optimizing, and maintaining the manufacturing processes used in the production of laser systems and optical assemblies. This role ensures high-yield, cost-effective, and reliable production through continuous process improvement, equipment qualification, and close collaboration with design, quality, and supply chain teams. The engineer will be a key technical link between R&D and production, focusing on scalability, manufacturability, and operational excellence.

Primary Duties & Responsibilities

1. Process Development and Optimization

• Develop, document, and implement manufacturing processes for laser modules, optical assemblies, and related sub-systems.
• Define critical process parameters for optical alignment, bonding, soldering, and laser cavity assembly.
• Conduct DOE (Design of Experiments) and SPC (Statistical Process Control) to optimize yield and minimize process variability.
• Translate R&D prototypes into robust, repeatable production processes.

2. Production Support

• Provide hands-on technical support to production teams for troubleshooting yield issues, process deviations, and equipment downtime.
• Implement root cause analysis and corrective actions for production failures (using tools like DMAIC, FMEA, Ishikawa).
• Support daily manufacturing operations to meet production schedules and performance targets (throughput, yield, quality).

3. Equipment and Tooling Management

• Specify, qualify, and maintain production equipment such as optical benches, alignment stations, bonding systems, and test setups.
• Design and procure custom fixtures, jigs, and alignment tools to improve precision and throughput.
• Ensure calibration and preventive maintenance of manufacturing and metrology tools.

4. Quality and Continuous Improvement

• Work with Quality and Reliability teams to ensure process compliance to ISO 9001 / ISO 13485 standards.
• Develop and update process documentation: work instructions
• Drive Lean and Six Sigma initiatives for process improvement, waste reduction, and cost optimization.

5. Cross-Functional Collaboration

• Interface with Design Engineering for Design for Manufacturability (DFM) reviews and prototype builds.
• Collaborate with Supply Chain and Vendors to ensure component quality and manufacturability.
• Support NPI (New Product Introduction) transitions from R&D to production.

6. Data Analysis and Reporting

• Collect and analyze process data to identify trends and improvement opportunities.
• Implement real-time data collection and traceability systems (MES, SPC dashboards).
• Present yield, performance, and process capability metrics to management.

Education & Experience

• A bachelor’s or master’s degree in engineering or its equivalents with at least 3-5 years of relevant work experience in Photonics or a related manufacturing field
• Possess technical expertise pertaining to Manufacturing, Assembly & Test Processes for mechanical assemblies, PCBA and optical components.
• Strong problem-solving skills and excellent knowledge in Six Sigma DMAIC approach, Lean principles, DOE, SPC, FMEA, GR&R and other quality improvement tools. Certified Six Sigma Green or Black Belt will be an advantage.
• Excellent interpersonal skills with good verbal and written communication skills.
• Self-directed and able to work independently with little or no direct supervision.
   

Job Summary

The Production Engineer supports and optimizes daily electroplating operations to ensure consistent product quality, efficient production flow, and compliance with safety and environmental standards. The role requires strong knowledge of plating processes, chemical bath control, equipment maintenance, and continuous improvement.

Key Responsibilities

1. Process Parameter Control

• Perform daily checks on all process parameters (temperature, pH, current, bath levels, flow, pump condition).

• Audit operators to ensure each process step is carried out according to specification and SOP.

• Train operators on proper equipment usage: valve operation, pump priming and air-trap checks, chiller operation, and basic line troubleshooting.

• Ensure timely correction actions when deviations are found.

2. Process Optimization

• Identify opportunities to improve loading efficiency (fixture design, part orientation, racking method).

• Work with Production and Process Engineering to increase throughput and reduce bottlenecks.

• Support improvements on cycle time, workflow, and chemical usage.

3. Quality Troubleshooting

• Participate in root-cause investigations for defects (e.g., poor adhesion, uneven colour, stains, white spots, roughness).

• Work closely with QA to verify findings and implement corrective actions.

• Escalate complex technical issues to senior Process Engineers when deeper subject expertise is required.

4. Equipment & Line Readiness

• Support preventive maintenance activities for pumps, agitators, rectifiers, chillers, filtration systems, and plating/anodizing tanks.

• Assist maintenance team in diagnosing equipment abnormalities that affect production stability.

• Ensure calibration of basic instruments (pH meter, conductivity, thickness gauges) is done on time.

5. Documentation & Reporting

• Complete production forms, bath check sheets, process logs, and operator audit records accurately.

• Update SOPs and work instructions when process changes occur.

• Prepare daily reports on process status, defects, and deviations.

6. Safety & Environmental Compliance

• Ensure safe handling of parts, chemicals, jigs, and equipment.

• Follow SDS and internal EHS requirements for chemical storage and disposal.

• Support EHS team during inspections (wastewater, ventilation, PPE compliance).

• Conduct on-the-job safety briefings for operators.

Qualifications

• Degree or Diploma in Chemical Engineering, Mechanical Engineering, Materials Engineering, or related field.

• 1–5 years’ experience in plating/electroplating, surface finishing, or chemical processing preferred.

• Strong analytical, troubleshooting, and process improvement skills.

• Knowledge of Lean Manufacturing, SPC, and chemical safety standards.

Skills Required

• Understanding of electroplating techniques (e.g., nickel, chrome, zinc, gold, tin).

• Ability to read technical drawings and interpret plating thickness requirements.

• Experience with rectifiers, chemical pumps, dosing systems, and wastewater treatment.

• Good teamwork, communication, and leadership skills.

• Provide support for operational and technical activities
• Machine & Equipment maintenance / calibration
• Establish SOP and machine manual to provide comprehensive servicing and maintenance programmes
• Identify areas of process improvement and automation to implement work improvement programmes to achieve desired machine efficiency and reject rate
• Plan, evaluate and improve technical/engineering projects for cost and productivity
• Implementation of industrial safety practice to ensure compliance
• Any other ad-hoc tasks as assigned

JOB REQUIREMENTS:

• Min Degree in Mechanical / Electrical Engineering or related discipline
• No experience needed, training provided

Office hours, Mon to Fi
Medical Device MNC

Interested candidates, please forward your resume to kevynhuang@recruitexpress.com.sg

Consultant: Huang Jingsheng Kevyn (R1333338)
Recruit Express Pte Ltd (99C4599)

• MNC (Woodlands)

• Company Transport Provided

• Basic: $5500 to $7000+ AWS + VB

• Excellent Benefits + Career Progression

• Process Manufacturing Plant
  

Job Responsibilities:

• Assist in managing daily production operations to ensure smooth and efficient plant operations

• Monitor production performance, process efficiency, product quality, and operational KPIs

• Coordinate manpower planning, production scheduling, and machine utilization to meet production targets

• Work closely with maintenance, warehouse, and utilities teams to minimize downtime and operational disruptions

• Support troubleshooting, process optimization, and continuous improvement initiatives within the plant

• Ensure compliance with GMP, HACCP, FSSC22000, workplace safety, and food quality standards

• Investigate production deviations and implement corrective and preventive actions

• Lead and supervise production operators, technicians, and shift personnel
  

Requirements:

• Degree / Diploma in Chemical Engineering, Food Technology, Manufacturing, or related discipline

• Minimum 5 years of production experience in edible oil, food manufacturing, FMCG, refinery, chemical, or process plant environment
  

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities

• Current and Expected salary

• Reason for leaving

• Date of availability

• Education background
  

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Manufacturing Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
• Salary Package: Basic salary up to $4,500 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Assist in New Production Introduction criteria for the following: manufacturing process development, tool design, integrated schedules, design to cost, sourcing technical support, quality qualifications, test support, product cost out and, introduction into the supply chain.
• Provide technical leadership for manufacturing processes of cables, harnesses, electro-mechanical assemblies, inspection, testing, tool and fixture designs.
• Apply knowledge of electrical/ electronic equipment production and test methodologies.
• Help to manage effectively multiple priorities under tight deadlines and bring assigned projects/programs to successful completion and profitability.
• Gather data and develop manufacturing solutions and documentation required for supporting OMS, WI, Schematic, drawings, and specs.
• Perform assembly work and provide guidance to technicians/operators.
• Perform customers’ onsite support for repairs and rework related to assembly process and any other technical issue.
• Manage daily activities of the manufacturing function including BOM, Work Instructions, Engineering Change Order (ECO) and ERP System.
• Perform and support any assembly process during First Article & production stage to meet customer needs.

APPLY NOW!!!

• Diploma or Degree in Electrical / Mechanical Engineering or a related professional certification.
• Able to create/interpret (2D & 3D Cable/Mechanical Drawings, Bill of Material, Operating Procedures, Test Procedures, schematic and Interconnection Diagram, etc)
• General knowledge of Mechanical and Electrical Engineering.
• Good communication and leadership skills; able to train and guide junior technicians.
• Proficient in CAD software.
• Proficient in Microsoft Office with hand-on experience with data and Microsoft Excel reporting.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #81261 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description & Requirements

• Involved in design and development of embedded and fiber optics sensing systems, and data communication IC’s hardware and software implementation to prototype functional testing.
• Data compilation and analysis, reporting and documentation.
• Involved in testing of photonics devices and/or optical sensors.
• Participates in the development and implementation of new products or product changes by creating product specifications, quality specifications, quality plans, risk analyses, FMEAs in conjunction with other product development team members.
• Runs complex problem solving efforts and mentors others on best practices. e.g. FMEA, Control Plan, Test plan, quality tools and DOE. e.g. Leads/ coordinates CA of failures using a structured approach.
• Owner of product specification and performance to those specifications.

Requirements

Qualifications:

• Candidate must possess at least a Bachelor or Master in Engineering (Electrical/Electronics/Computer/Optics)

Experience:

• 8 – 10 years working experience preferably in the semiconductor/component manufacturing industry background (with or without experience are welcome to apply)
• Software knowledge of MS Office, JMP, PDF/Spot-fire is a plus
• Excellent inter-personal and communication skills, both written and oral.
• Possess the ability to work independently, self-motivated, initiative and deliver tasks on time.
• Must be team oriented, positive working attitude, able to multi-tasks in a fast pace environment and work with personnel at all level.

Job Description

• Product owner for photonics devices and optical sensors, responsible for product specification and performance.
• Design and development of embedded and fiber optics modules for sensing and data communication optics hardware and software.
• Collaboration with cross-functional team to develop and prototyping of new products or product derivatives, implementation to prototype functional testing and ramp to production.
• Develop qualification strategy and schedule, drive execution to meet project goals
• Complete project documentation including product specifications, quality specifications, quality plans, risk analysis, FMEAs and other product related documentation.
• Big data processing and analysis to provide management reporting and drive improvement activities.
• Lead complex problem solving efforts and mentor others on best practices. e.g. FMEA, Control Plan, Test plan, quality tools and DOE. e.g. Leads/ coordinates CA of failures using a structured approach.

Requirements

Minimum Qualification:

• Candidate must possess at least a Bachelor or Master in Engineering (Electrical/Electronics/Computer/Photonics)

Experience:

• 5 – 7 years working experience preferably in the semiconductor/component/photonics industry background

Specific Skills / Knowledge:

• Knowledge of photonics technology
• Software knowledge of MS Office, JMP, PDF/Spot-fire/Tibco is a plus
• Excellent inter-personal and communication skills, both written and oral
• Possess the ability to work independently, self-motivated, initiative and deliver tasks on time
• Must be team oriented, positive working attitude, able to multi-tasks in a fast pace environment and work with personnel at all level

Technical Product Management

• Collects process / production / competitor data at customer site Provide Level 2 support
• Scouts and reports new product ideas and innovation with the goal to enhance the product and service portfolio
• Provides support  for AFC model introduction (launching, demo, Semi shows)
• Conducts feasibility studies and sample bonding
• Engages in R&D projects during product definition / requirement engineering, In-house and customer testing
• Collaborate with R&D in defining new features and CIP requirements; both software and hardware
• Participation in the development of new or the extension of existing hardware and software modules according to current or future customer requirements (analysis, modelling, calculation, measurement, qualification)
• Carry out internal acceptance test of new features and CIP developed by R&D
• Builds-up technical know-how on product / problem solving via structured knowledge transfer between the Product Line, the R&D team and the different regional support centers
• Defines SW requirements (JIRA) for new modules and features (Requirement Engineering)

Pre- & After Sales Support

• Conducts evaluations, benchmarks and demos
• Support Sales and CPMs during Pre-Sales activities
• Establishes good customer relationship on technical level with all key accounts assigned
• Provides Technical Info and Updates to CPMs and Sales

Technical Support, 2nd Level support

• Coordinates and provides technical solutions / problems solving on customer issues in collaboration with Field Service Engineer in Asia (2nd level support)
• Investigates issues at customer site and supports Engineering team (Software & Hardware) for fast and short time to solution

Know How Transfer

• Troubleshoots and maintains demo equipment if necessary
• Conducts training on existing and future FC platforms to FSE’s and customers
• Supports Documentation and Manual writing activities
• Travel requirement

Product Engineer with NPI Experience

Plans, directs, and coordinates product assembly and test processes by providing technical support in the development, implementation and maintenance of manufacturing methods, test equipment and test software by performing the following duties:

·      Responsible for product engineering capabilities focused on cost, quality and delivery improvements in order to support a manufacturing organization.

·      Participating in NPI activities including DFA and DFM, technical review& support with the design team (Flex design center/ Customer).

·      Participating on technical review and analysis for new business RFP package to provide FGCM inputs (Cycle Time, Space) and NRE for manufacturing setup (Facilities, Jig, Fixture, Tester).

·      Coordinates with customers to determine product specifications, bill of materials, test methods, test software and design changes and responds to their request.

·      Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes.

·      Develops, evaluates, and improves both manufacturing and test methods for productivity, better yield and through put.

·      Establish robust, repeatable and reproducible process and test  parameters

·      Troubleshoot process & test related issues and resolves the problems by performing analysis of root causes, developing and coordinating corrective action measures and monitoring improvements.

·      Develop and maintain product related (both process and test ) documentation

·      Analyzes and plans workforce utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency.

·      Coordinates development, procurement, installation and calibration of instruments, equipment required to test and record test data.

·       Co-ordinate and work on the requirements for equipment and process validations.

·      Applies statistical methods to estimate future manufacturing requirements and potential.

·      Provide training to production personnel during new product transfer or product design changes

·      Provide equipment maintenance and repair support as required.

·      Participates in cost improvement/reduction programs as part of LEAN

·      Contribute to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs.

Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures

Job Description

• Industry/ Organization Type: Manufacturing - Electronics
• Position Title: Manufacturing Technician/ Manufacturing Engineer
• Working Location: Tai Seng
• Working Hours: Monday to Friday (9am to 6pm)
• Salary Package: Basic + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Support daily operations of the through‑hole/DIP assembly line to meet output, quality, and safety targets.
• Set up, operate, and perform basic preventive maintenance on DIP equipment and fixtures.
• Conduct in‑process inspections and functional tests on assembled products.
• Troubleshoot process issues, escalate as needed, and recommend improvements.
• Meet production schedules while maintaining first‑pass yield and quality standards.
• Other ad-hoc duties which may be assigned.

APPLY NOW!!!

• Minimum ITE Nitec/Higher Nitec in Electrical/Electronic/Mechatronics/Manufacturing Technology.
• 1–3 years in electronics manufacturing.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #80442 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

• Build and troubleshoot automated assembly machines, robotic systems, and sub-assemblies from engineering drawings.
• Debug machines, robots, and processes for newly built machines.
• Perform machine and robot alignments, calibration, and final set-ups.
• Assist Engineers in carrying out new machine, robotic system, or equipment start-up.
• Assist Engineers in continuous yield improvement programs through machine mechanization, robotic automation, and process optimization.
• Experience in machine and/or robotic equipment assembly
• Able to read and interpret engineering drawings
• Hands-on experience in machine troubleshooting and assembly is preferred

Interested candidates please send in your resume to:
Reina Patricia Johan
Outsourcing Team
Recruit Express Pte Ltd
Email: reina@recruitexpress.com.sg

EA License No: 99C4599

GIC is one of the world’s largest sovereign wealth funds. With over 2,000 employees across 11 locations around the world, we invest in more than 40 countries globally across asset classes and businesses. Working at GIC gives you exposure to an extraordinary network of the world’s industry leaders. As a leading global long-term investor, we Work at the Point of Impact for Singapore’s financial future, and the communities we invest in worldwide.

Technology Group
We experiment, design, and lead a 24×7 global business where we support core capabilities in asset management, trading, investment operations, and risk management. We deliver secure, reliable, and integrated solutions, and provide insights on new, and emerging technologies. 

Investment Technology
The Investment Technology group builds and enhances technology that supports the firm’s end-to-end investment lifecycle. It brings together capabilities across analytics, deal workflow, trading, execution, and operations to enable consistent, efficient, and data-driven investment processes. Through modern, scalable, and secure platforms, the group empowers investment teams with integrated tools that drive insight, automation, and operational excellence across all asset classes.

What impact can you make in this role?
You will be empowered to be at the top of your game by providing strategic partnership, and innovative technology solutions that supports GIC’s vision of being a tech-driven, global, long-term investment firm.

What will you do as a Production Support Engineer?

• Provide support for follow-the-sun L1 and L2 Production Support Model for Front Office applications and platforms that perform the following functions: (1) Portfolio Management, (2) Order and Execution Management, (3) Trading Lifecycle, (4) Investment workflows, and (5) Research and Analytics

• Production Monitoring: Be accountable for the production environment's health and performance using monitoring tools and dashboards.

• Incident Management: Respond to and manage production incidents and ensure minimal impact on business operations. Document incidents and follow up on resolutions.

• Change Management: Review and execute system upgrades and deployments and ensure minimal risk and disruption to production services.

• User Support: Provide support to end-users and stakeholders, address queries and issues related to production services.

• Vendor Engagement: Collaborate with support personnel of Solution Providers, to troubleshoot, mitigate, and resolve issues related to vendor products.

• Issue Investigation: Investigate production issues and engage relevant teams (e.g. infrastructure, data engineering, application teams) for mitigation and strategic solutions.

• System Resiliency Management: Drive system failover and disaster recovery processes.

• Documentation: Maintain comprehensive documentation of application run books, incident resolutions, and system configurations.

• Continuous Improvement: Identify opportunities for process improvements and automation to enhance the efficiency and reliability of application support. 

What makes you a successful candidate?

• Bachelor’s degree in computer science, Information Technology, or equivalent experience

• 6+ years of experience in an application support, system administration or related role

• Hands on technical skills in the following areas: 

  • Hands on experience with monitoring tools (e.g., Datadog, Splunk).

  • Familiarity with cloud infrastructure (e.g., AWS, Kubernetes)  

  •  Familiarity with database management systems (e.g., MSSQL, PostgreSQL, Oracle).

  • Knowledge of operating systems (e.g., Linux, Windows).

  • Stellar problem-solving and analytical skills.

  • Strong attention to detail and multitasking prowess. 

• Excellent communication and interpersonal skills.

• A team-oriented mindset with a dash of independence.

• Strong experience in at least one of the following domains is preferred. Trading workflow including OMS (e.g., BlackRock Aladdin) and EMS Data analytics and TCA report 
• Business Intelligence tools (e.g., Power BI, Tableau, DataBricks) 

Work at the Point of Impact  
We need to be forward-looking to attract the right people to help us become the Leading Global Long-term Investor. Join our ambitious, agile, and diverse teams - be empowered to push boundaries and pursue innovative ideas, share your views, and be heard. Be anchored on our PRIME Values: Prudence, Respect, Integrity, Merit and Excellence, which guides us in how we make our day-to-day decisions. We strive to inspire. To make an impact.

Flexibility at GIC  
At GIC, our offices are vibrant hubs for ideation, professional growth, and interpersonal connection. At the same time, we believe that flexibility allows us to do our best work and be our best selves. Thus, our teams come into the office four days per week to harness the benefits of in-person collaboration but have the flexibility to choose which days they work from home and adjust this arrangement as situational needs arise.

We are an equal opportunity employer  
GIC is an equal opportunity employer, and we value diversity. We do not discriminate based on race, religion, colour, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.

Learn more about our Technology Group here:  
https://gic.careers/group/technology-group/

To be considered for the role, please submit a formal application through the GIC Careers site at:

https://careers.gic.com.sg/job-invite/17205/

Job title: Manufacturing Engineer - CK Job ID:20226

Location : West (Tuas)

Basic up to $4,000 + AWS bonus + Variable Bonus

Job responsibilities:

-Assist in production line to ensure smooth production and resolve issues arising from work.

-Help to keep the production line smooth and stable so as to ensure good quality products being produced.

-Identify problems and solve them within efficient and effective time management.

-Responsive to environment changes and able to commit to OT when required for operational purposes on

weekdays / weekends.

Requirements:

-Degree or Diploma in Engineering or equivalent

-2 years of relevant experience in Manufacturing or similar industry

-Able to work in cleanroom environment.

Interested applicants please send your resume to Calista@pasona.com.sg with email subject header "Job Application for Manufacturing Engineer - CK Job ID:20226".

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Koh Siew Xing

EA Registration No: R22104418

Pasona Singapore Pte. Ltd.

EA License No:90C4069

• Provide support for operational and technical activities
• Machine & Equipment maintenance / calibration
• Establish SOP and machine manual to provide comprehensive servicing and maintenance programmes
• Identify areas of process improvement and automation to implement work improvement programmes to achieve desired machine efficiency and reject rate
• Plan, evaluate and improve technical/engineering projects for cost and productivity
• Implementation of industrial safety practice to ensure compliance
• Any other ad-hoc tasks as assigned

JOB REQUIREMENTS:

• Min Degree in Mechanical / Electrical Engineering or related discipline
• No experience needed, training provided

Office hours, Mon to Fi
Medical Device MNC

Interested candidates, please forward your resume to kevynhuang@recruitexpress.com.sg

Consultant: Huang Jingsheng Kevyn (R1333338)
Recruit Express Pte Ltd (99C4599)

• Focus and responsibility for after sales quality related tasks
• Responsible for setting up improvement activities on dedicated products.
• Driving Product Quality Circle within dedicated parties (Sustaining Teams, Platform leaders, HOD’s ..)
• Central part of improvement team in sense of input, coordinator, support on dedicated tasks.
• Supporting escalation in the after sales area (NPI or customer escalation)
• Participating in customer quality calls and task force meeting.
• Close collaboration with the product line & technical support according to the learning's out of onsite trouble shooting and raising preventive knowledge within the organisation.
• Lead all project related documentation and ensure communication (8D-Report, action plans and follow up)
• Initiating and supporting product related analysis
• Interaction with production facility
• Participate customer audits and customer improvement programs.
• Preparation of after sales data and KPI monitoring and reporting.
   

Education

• Minimum Degree in Mechanical / Electrical / Mechatronics / Machining related with 3 years working experience in similar industry.
• Knowledge in project management and Quality Tools

Work experience

• Good understanding of reliability theories & methods (DFMEA, SPC, 8Ds…) and semiconductor manufacturing processes,
• Experienced in quality methods, data analysis and continuous improvement.
• Being in a driver role and push improvements,
• Fast ability to understand company structure and interact with many interfaces
   

Expertise and methodology

• Knowledge in process management for product related business processes, specifically design, engineering, SCM and production (i. e. operational)
• Familiarity with cleanroom protocols (class 10/100) and semiconductor workflows
• Competency in MS-office for data analysis, reporting & presentation
• Familiarity with the Atlassian JIRA system

Other requirement criteria

• Capabilities in analysis, and creation of measures
• Driving and Setting standards and defining roles and responsibilities in own job, processes, and departments
• Agile in sense to drive improvements, but to accept progress on a pragmatic level.
• Flexibility and practice-oriented proceeding, reacting on rapid moving situations and taking appropriate initiatives.
• Experience in handling Die attach equipment is nice to have