Total 39 Senior Executive level Manufacturing / Production job vacancies

Responsibilities:

Responsibilities for this position involve working closely with SOC Design, SW/System, and Chipset PE/PM/PdM to validate Digital SOC chip on ATE, SLT and Bench; collaborate with Test Engineering, SLT, and Bench to develop HVM Test Solution. The role is expected from project planning to execution on Digital SOC development. Cross collaboration work is expected with SW, System, Design, Process and Customer Engineering on power and performance related tests for High Volume Manufacturing. The individuals selected for the positions will need to be able to work in a fast paced and dynamic environment and be passionate about delivering quality work.

Requirements:

Experience in Digital SOC development from planning, silicon validation to High Volume Manufacturing phase. Experience in ATE/SLT test coverage, test HW development, data analytics/ statistics, product reliability qualification (ESD/LU, HTOL and Package Qual), ATE System correlation for power and performance, project updates to upper management and cross functional teams, stakeholder management, and risk management.

Education Requirements:

Min 3 years of related job experience in product, test, product engineering.

Bachelor's/Master’s, Electrical and Electronic Engineering or Computer Engineering 

Position Summary

We are seeking a highly motivated Senior Engineer, Assembly to support research and development activities in Photonics IC Packaging. The role involves machine setup, assembly, testing, troubleshooting, and process improvement for advanced photonics packaging applications. The successful candidate will work closely with cross-functional teams to ensure efficient assembly operations, quality performance, and continuous process optimization.

Key Responsibilities

• Perform machine setup, calibration, testing, and mechanical assembly of active devices onto interposers.
• Conduct testing on assembled devices and generate detailed test reports and summaries.
• Troubleshoot assembly-related issues and document findings for failure analysis and corrective actions.
• Coordinate with internal teams to manage incoming materials and ensure readiness for assembly operations.
• Analyze packaging process performance, including yield, manufacturing cost, process specifications, and cycle time.
• Support the planning and execution of continuous improvement initiatives to enhance manufacturing efficiency and product quality.
• Maintain proper documentation of assembly procedures, testing results, and engineering activities.

Qualifications & Requirements

• Diploma, Advanced/Higher/Graduate Diploma, or Bachelor’s Degree in Engineering or a related discipline.
• Minimum 5 years of relevant working experience in the semiconductor industry.
• Hands-on experience with die-assembly tools, flip-chip bonders, and wire bonders is strongly preferred.
• Familiarity with CAD drawing tools is highly advantageous.
• Knowledge of semiconductor wafer packaging and photonics packaging processes is a plus.

ALG is currently hiring a Senior Manufacturing Engineer for our MNC client with a facility in the East, Singapore. Our client is a global leader in designing, manufacturing, and servicing advanced systems and components for the high-technology and advanced manufacturing industries. This is a permanent role offering strong career progression within a dynamic manufacturing environment.

Roles and Responsibilities:

• Manage the end to end effort for the development and deployment of new production processes and equipment.
• Develop the planning, programming, and production flow of precision metal parts.
• Validation of CNC programs for errors in an offline virtual environment
• Identify and design tooling for production processes .
• Maintain and control process documentation of production processes.
• Work with Quality Engineers to develop gauging and systems for process control.
• Troubleshooting and continuous improvement of production processes.
• Develop paperless shopfloor documentation systems.
• Assist production in the prove-out and debugging of new processes.
• Follow prescribed work rules and safety standards.
• Take ownership of project goals and objectives to ensure project success.

Job Requirements:

• Degree in an Engineering discipline (Mechanical, Manufacturing, Material)
• At least 5 years’ of relevant working experience.
• Knowledge of CNC machines and tools, including their designs and uses.
• Knowledge of ANSI Y14.5 blueprint reading, G-Codes, M-Codes, and CAD/CAM programming.
• Knowledge of tooling and fixturing concepts and standards.
• Demonstrate high level of attention to details.
• Ability to develop and manage a project from concept to implementation.
• Ability to be Flexible and adapt to changing priorities.
• Ability to analyze information and quickly solve problems.
• Experience with metrology standards and equipment.

If you are interested in this role, please APPLY NOW! Please note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R23119425

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

The position requires engineer to carry out tasks related to the support of broadcast and broadcast IT related equipment and systems, including activities such as manning of support hotline, system diagnosis, remediation and monitoring, system administration, patching and preventive maintenance. In addition, the position is required also to support the planning and implementation of broadcast IT system projects.

• Provide technical support to broadcast equipment and systems in News Studios & News Post Production and asset management system, Outside Broadcast production van, News Room Computer System and etc.
• Document, communicate, collaborate, and handle fault incidents
• Assess system vulnerabilities and provide guidance, remediate and mitigate any reliability and security risks
• Perform troubleshooting and repair of broadcast equipment and system.
• Perform preventive and corrective maintenance broadcast and IT equipment.
• Work with different business units to provide technical solutions to enhance existing operation and setup
• Evaluate and recommend new broadcast IT equipment and system.
• Support project implementation of broadcast IT system and infrastructures including the support in drafting of technical specifications and costings documentations.
• Perform shift and standby duty to support broadcast system and infrastructures.

• Degree in Information Technology, Information Systems, IT Security or equivalent. CCNA, Certification in Information Technology networking field is an advantage.
• Candidate without the required academic qualifications but with at least 3 years of relevant experience in IT, Broadcast or Media Production related field are welcome to apply.
• Microsoft certifications such as MCSA preferred
• Project management experience preferred.
• Basic understanding of cloud / enterprise system architecture
• Network troubleshooting skills of IT devices maintenance and experience with management and configuration of networking devices (switches, routers, firewalls) will be preferred.
• Perform shift and standby duty to support broadcast system and infrastructures.

As Frontend Central Product Integration Engineering and transformative (CPIE) team at Micron Technology, Inc., you will be leading new initiatives to deliver pioneering process capability, best-in-class bits per wafer (Yield) with the highest quality and fastest speed through innovation and collaboration with multi-functional teams. Your primary focuses include but not limited to:

Initiate new data solutions and methodologies to:

• identify process, test, and design improvement opportunities, specialized in UE_ROW & all quality index, Front End-PTS integration, and high-value-bits (PG2+) yield;

• modeling, monitoring and aiming for tool performance benchmarking;

• Process equipment prognostics and process integration optimization;

• Identity test optimization opportunities for high product grade yield improvement.

• Collaborate with site Process & Equipment Engineering, Manufacturing(MFG), Product Integration Engineering (PIE) and Data Science (DS) team to establish feasibility of new initiatives, demonstrate business values, and prototype solution mock-ups;

• Partner with Global Quality (GQ), Product Engineering (PE), Central PEE(CPEE), Smart Mfg Artificial Intelligent (SMAI), Technology Development (TD), and Suppliers to deliver end to end solutions, implement BKM development and deployment to production.

• Integrates AI-assisted tools and insights into daily work to improve efficiency, quality, or effectiveness,exercising sound judgment and complying with organizational standards and legal requirements.

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI-enabledenhancements within one’s scope of work.

Collaboration

• Partner closely with multi-functional teams to ensure successful communication and collaboration for project implementation.

• Detail oriented with the ability to work independently

• Dependability and able to work effectively in multi-functional teams.

• Facilitate and lead activities in designing and optimizing current system, methods, tool, skill to be Best In industry.

• Manage priorities and enhancements to improve business processes and existing systems that are global in nature.

• Willing to work during non-standard hours when needed to provide support to engineering teams at any Micron site.

• Strong growth mindset and willing to continue to learn, unlearn, relearn.

Communication

• Effective communication skills in verbal/written.

• Self-motivated. Able to work independently with minimal supervision.

• Able to travel as required to support department and company objectives.

Requirement and Technical Competency:

• Experience in PIE, Test solution team, product engineering and circuit design engineering. Understanding of Process/Product Integration will be advantageous;

• In depth knowledge of processes, equipment and control system;

• Proficiency in data analytical tools such as Y3, JMP, Python to perform numerical experiment. Proficiency in Statistical/Machine Learning will be additional advantageous; 

• Proven track record to make decisions, multi-task, and solve problems and address root causes.

• Exhibit critical thinking to find opportunities.

• PhD/Masters/Bachelors with relevant course of study and experience

• Ability to apply baseline digital fluency and role‑appropriate AI literacy to use AI‑enabled tools responsibly and effectively for research, analysis, content creation, problem‑solving, operational tasks, and achieving business outcomes.

The Job:

• Perform process planning and fixture & gauge designs
• Handle quotations and program management
• Apply Six Sigma/Lean Manufacturing methodologies for continuous process improvements
• Planning and scheduling of ERP system

Requirements:

• Machining process, fixture/gauge/tool design
• Degree in Mechanical Engineer or related field with minimum 2-3 years of work experience

Interestedapplicants can send their detailed resumes to janelui@recruitexpress.com.sgor call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg.No. 199601303W || EA Licence No. 99C4599

The Job:

• Perform process planning and fixture & gauge designs
• Handle quotations and program management
• Apply Six Sigma/Lean Manufacturing methodologies for continuous process improvements
• Planning and scheduling of ERP system

Requirements:

• Machining process, fixture/gauge/tool design
• Degree in Mechanical Engineer or related field with minimum 2-3 years of work experience

Interestedapplicants can send their detailed resumes to janelui@recruitexpress.com.sgor call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg.No. 199601303W || EA Licence No. 99C4599

Senior .NET Production Support Engineer (Cloud & SRE Focus)

Job Summary

We are seeking a highly skilled and experienced Senior .NET Production Support Engineer to manage and enhance mission-critical, cloud-native applications. This role requires expertise in Site Reliability Engineering (SRE), observability, and modern DevOps practices, ensuring high availability, scalability, and performance of distributed systems.

You will lead incident management, advanced troubleshooting, root cause analysis (RCA), and automation initiatives, while collaborating with cross-functional teams to drive resilience, reliability, and continuous improvement.

________________________________________

Key Responsibilities

• Provide L2/L3 production support for.NET (Core/6/7/8+) and ReactJS-based microservices applications

• Implement and maintain SRE practices (SLIs, SLOs, error budgets) for system reliability

• Perform advanced troubleshooting in distributed, microservices-based architectures

• Monitor system health using observability stacks (logs, metrics, traces)

• Drive root cause analysis (RCA) with a focus on preventive and automated solutions

• Collaborate with DevOps and development teams in CI/CD pipelines and release automation

• Support containerized deployments (Docker, Kubernetes) and cloud environments

• Automate repetitive operational tasks using scripting (PowerShell, Python)

• Participate in on-call rotations and incident response (Major Incident Management)

• Integrate AI-driven monitoring and anomaly detection tools for proactive issue detection

• Ensure compliance with ITIL, security, and DevSecOps standards

• Maintain detailed runbooks, knowledgebase, and operational dashboards

Required Skills & Qualifications

• Bachelor’s degree in Computer Science, Engineering, or related field

• 5+ years of experience in .NET application support, SRE, or backend development

Core Technical Skills

Strong expertise in:

• C#, ASP.NET, .NET Core / .NET 6+(preferred latest versions)

• RESTful APIs, Web API, Microservices architecture

• SQL Server, MySQL (plus performance tuning & query optimization)

• Experience in:

• Multithreading, async programming, memory management

• Debugging production issues (dump analysis, profiling, thread analysis)

• Performance optimization &scalability engineering

• High-Niche & In-Demand Skills (Added)

Cloud &Cloud-Native

• Azure (App Services, AKS, Functions, Application Insights) / AWS (EKS, Lambda, CloudWatch)

• Cloud-native design patterns &distributed systems

 Containers & Orchestration

• Docker, Kubernetes (AKS/EKS), Helm charts

• Experience managing production workloads in containerized environments

Observability &Monitoring

• Advanced tools: Prometheus, Grafana, ELK Stack, Open Telemetry

• Expertise in distributed tracing (Jaeger, Zipkin)

DevOps & CI/CD

• Azure DevOps / GitHub Actions / Jenkins pipelines

• Infrastructure as Code (Terraform, ARM templates)

DevSecOps

• Secure coding practices, vulnerability scanning

• Tools like Snyk, SonarQube, OWASP compliance

• AI & Automation (Advanced Niche Edge)

• AI-driven monitoring (AIOps tools)

• Basic knowledge of ML models for anomaly detection

• Experience integrating GenAI / ChatOps for support automation

Tools &Technologies

• Incident Management: ServiceNow, JIRA

•  Monitoring: Splunk, AppDynamics, Dynatrace

•  Version Control: Git (GitHub / GitLab /Bitbucket)

Preferred Skills

•  Certifications:

•  Azure / AWS Certified Solutions Architect or DevOps Engineer

•  ITIL Foundation / Advanced ITIL[i]

Exposure to:

•  Python automation & scripting

•  AI/ML certifications or hands-on experience

•  Financial services / high-availability environments (bonus)

• Perform process planning and fixture & gauge designs
• Handle quotations and program management
• Apply Six Sigma/Lean Manufacturing methodologies for continuous process improvements
• Planning and scheduling of ERP system

• Control of machining cycle time within target including all in-machine activities such as probing, machining, appropriate cutter checks etc.

• Control overall costs for machining taking into consideration cycle time and cost of cutters.

Requirements

- Minimum Degree in Mechanical Engineering/ Manufacturing Engineering

- Preferably with 3-5 years of relevant manufacturing engineering

- Experience in Six Sigma/Lean Manufacturing methodologies

Interested candidates please send in your resume to:
Topaz Liang Huimin (CEI No. R1104500), email to: topaz@recruitexpress.com.sg

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

About Doodle Labs 

Doodle Labs is the global leader in high-performance private wireless systems. We build cutting-edge mesh networks for robotics, drones, and the Industrial Internet of Things. Doodle Labs has experienced rapid growth over the past five years as our radio systems have been adopted by Fortune 500 companies (e.g. Airbus, General Electric) and industry-leading innovators (e.g. Boston Dynamics, FLIR) 

Your Opportunity 

Your opportunity to work with cross-functional teams of RF, Software, Mechanical design, NPI, Operations and Manufacturing/Quality assurance to build the next generation of Doodle Labs' radio portfolio.  

The successful candidate will have significant experience in RF development, Product Engineering and manufacturing of Radio products. 

Key Responsibilities: 

• Lead product engineering activities for one or more radio product lines from design through validation and manufacturing.  

• Own technical execution for product bring‑up, debugging, test, and validation.  

• Drive design for manufacturability (DFM), design for test (DFT), and cost optimization initiatives. 

• Develop and improve test setups, automation scripts, and validation processes to reduce test time and improve coverage.  

• Support regulatory and compliance certifications (FCC, CE, etc.).  

• Manage component obsolescence and support End‑of‑Life (EOL) transitions.  

• Produce and review technical documentation including datasheets, integration guides, and application notes.  

• Mentor and provide technical guidance to junior Product Engineers. 

Job Requirements 

• Bachelor’s or Master’s in Electronics Communication Engineering or a related field  6-9 years of industry experience 

• In-depth knowledge of radio/Wi-Fi product development, Product Engineering and quality control 

• Strong hands‑on experience with hardware bring‑up, debugging, and manufacturing support.  

• Solid understanding of quality control, validation, and production test methodologies.  

• Ability to work independently in a fast‑paced, cross‑functional environment. 

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.) is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer/ Senior Engineer to be part of our Product Engineering Department diverse team of talent.

What you will be working on:

• Ensuring 1st time yielding silicon, benchmark D0 for baseline and products.
• Identify & resolve Product, Test & Fab-Process related yield limiters in shortest time possible.
• Technical interface with Business Lines/customers
• Driver for yield improvement
• Resolve product yield, quality and reliability issues
• Perform pre-tapeout risk assessment and communicate with Business line/Fab on the necessary actions to eliminate/minimize the risk.
• Work with Customers/Mother Fab on the DfM related issue.
• Conduct product yield analyses to identify root cause of wafer sort and final test failures
• Set up fault diagnostic capabilities for yield improvement
• Work with Business line/customers on product low yield disposition
• Perform electrical and physical failure analysis to isolate fail location
• Drive the yield improvement task force

More about you:

• Master/bachelor’s degree in electrical / Electronic Engineering or Science in Physics
• 2 – 8 years product and/or test engineering, failure analysis or process-integration experience
• Experience in Fab process, yield engineering or design will be an added advantage
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical & problem-solving skills
• Good interpersonal and communication skills

SSMC is firmly committed to upholding equal employment opportunities for all individuals. We strictly adhere to the Tripartite Guidelines on Fair Employment Practices (TGFEP), the Singapore Food Safety and Security Act 2025 (FSSA 2025), and the Singapore Code of Advertising Practice. All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Our vision is to transform how the world uses information to enrich life for all.  
 
Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. 

As part of the HIG HBM Product Engineering organization, you will help drive the development of next-generation GenAI, machine learning, and advanced data analytics solutions for semiconductor engineering. In this role, you will work on intelligent systems that improve engineering productivity, strengthen technical decision-making, and unlock insights from complex manufacturing, validation, and engineering workflows. 

You will collaborate with cross-functional teams across Product Engineering, Design Engineering, System Engineering, Data Science, IT, and Manufacturing to prototype, build, and scale practical AI-driven solutions that improve quality, cost, cycle time, and engineering efficiency. 

Key Responsibilities 

• GenAI System Development: Design, build, and improve GenAI-powered and agentic systems supporting semiconductor engineering workflows such as code generation, data extraction, analytics, documentation automation, failure triage, and technical knowledge retrieval.  

• Large-Scale Data Pipelines: Develop scalable data pipelines and analytical workflows to ingest, clean, transform, and analyze large, complex, and heterogeneous datasets from multiple manufacturing and engineering systems.  

• Advanced Data Analytics: Apply Python, SQL, and data science libraries (e.g., pandas, matplotlib) to perform deep analysis, generate visualizations, and deliver actionable engineering insights.  

• LLM Workflow Engineering: Build, evaluate, and optimize LLM-based workflows, including prompting, retrieval-augmented generation (RAG), inference orchestration, benchmarking, and quality evaluation.  

• Machine Learning Production: Develop and productionize machine learning and deep learning models for classification, regression, anomaly detection, failure analysis, and engineering decision support.  

• Distributed Data Processing: Implement robust data processing techniques such as data cleansing, outlier detection, and missing-data handling using distributed or large-scale frameworks (e.g., PySpark, BigQuery).  

• Cross-Functional Collaboration: Partner with domain experts and cross-functional teams to translate complex engineering problems into scalable AI/ML and analytics solutions.  

• Production Deployment: Support deployment, monitoring, and operationalization of AI/ML solutions in cloud and enterprise environments.  

• Technical Communication: Communicate technical findings, recommendations, and model outcomes clearly to both technical and non-technical stakeholders.  

• Innovation Leadership: Identify and drive high-impact opportunities where GenAI, machine learning, and analytics can improve engineering productivity and business outcomes. 

Minimum Qualifications 

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Science, Data Science, Statistics, Artificial Intelligence, or a related field. 

• Minimum 2 years of hands-on experience developing and deploying AI applications in semiconductors, electronics, or other engineering industries. 

• Strong programming proficiency in Python and SQL.  

• Strong technical foundation in data analytics and visualization, including tools and libraries such as pandas, scikit-learn, matplotlib, plotly, or similar ecosystems.  

• Familiarity with agentic AI frameworks such as LangGraph, Google ADK, AutoGen and evaluation tools like AgentEval. 

• Familiarity with modern AI coding tools / agentic coding harnesses, such as Claude Code, Roo Code, Cursor, Cline, Windsurf, Gemini CLI, or similar tools.  

• Hands-on experience developing and deploying AI/ML systems involving LLMs, including RAG, agentic workflows, and frameworks such as PyTorch or TensorFlow. 

• Cloud experience with GCP, AWS, or Azure, including deploying ML pipelines in production. 

• Experience with LLM training, inference, and evaluation workflows, including prompt design, benchmarking, validation, or retrieval-augmented systems.  

• Experience analyzing large, complex, and heterogeneous datasets from multiple systems and applying sound techniques for data cleansing, outlier handling, and missing-data treatment.  

• Strong analytical, problem-solving, and software development skills.  

• Strong communication skills with the ability to explain technical concepts and findings effectively.  

• Strong sense of ownership, accountability, and engineering rigor. 

Preferred Qualifications 

• Experience building agentic systems or AI solutions for semiconductor manufacturing, product engineering, validation, yield improvement, reliability, or failure analysis. 

• Deep understanding of semiconductor-specific AI/ML applications 

• Demonstrated understanding of deep learning architectures and computer vision.  

• Experience using enterprise data platforms such as BigQuery, Snowflake, MSSQL, Oracle, or Redshift. 

• Experience with Kubernetes or similar production infrastructure and deployment frameworks. 

• Experience with web application technologies such as JavaScript, HTML, and CSS.  

• Experience designing scalable, enterprise-grade AI/ML systems with attention to reliability, traceability, and operational readiness. 

• Familiarity with document-processing pipelines, technical knowledge platforms, or retrieval systems for engineering content. 

• Experience working in cross-functional environments spanning engineering, manufacturing, data science, and IT. 

As a key leader within High Bandwidth Memory (HBM) Product Engineering Media Health team, you will spearhead and develop a high performing team driving both intrinsic and extrinsic reliability test development and execution for Micron’s latest HBM products, both on DRAM and Interface die and a stacked product. Your responsibility is to drive extrinsic DPM reduction (Time 0 and Field DPM) and lead the intrinsic reliability charter, along with optimized Manufacturing Test Flow to meet critical KPI’s Quality, Cost and Cycle Time. You will be leading the team to characterize the products from reliability aspect, identify the reliability gaps, working on root cause and resolution of qual and RMA failures pertaining to defectivity and intrinsic reliability margin and drive fab process improvement driven by the qual failures. Additionally, your team will also be the key person in frontend process conversion, where you will work with Fab, TD, GQ teams to establish robust business process for process conversions to facilitate yield improvements, DPM and Cost Reduction. You will collaborate across functions within and outside of HBM to meet both strategic and tactical objectives while continually maximizing the effectiveness of the HIG HBM PE organization. The future of HBM are exciting and dynamics. Micron is seeking experienced individuals that find technical challenges engaging and invigorating.

Responsibilities:

• Reliability Test Flow Development: Define and develop reliability stress, test flows and test plans to cover all Product Reliability aspects.

• Reliability Test Plan and Execution: Work closely with Global Quality team to define qualification plan, review and manage the qualification execution progress, and drive for qualification gating issue resolution.

• DPM reduction: Drive down and achieving Extrinsic Reliability (Time 0 and Field DPM) and Intrinsic Reliability through Optimized Manufacturing Test Flows and Test Strategy to meet critical KPI’s Quality, Cost and Cycle Time

• Root Cause and Resolution of Qual and RMA Device Issues pertaining to defectivity and intrinsic reliability: Debug and identify root cause and failures in reliability tests by electric failure analysis(EFA) and Physical Failure Analysis (PFA) and drive for resolution and improvements through cross functional team collaboration.

• Process Conversions and HVM: The role involves providing recommendation to fab teams for new process conversions to reduce cost, increase yields. This is critical as it directly impacts the yield, quality, reliability, and performance of HBM products, which are key components in many modern technologies.

• Risk Management: The role requires communication with Product Managers/Leads to manage risks associated with DPM process conversions. This is crucial in ensuring that the conversions move at an appropriate pace, balancing the need for innovation with the need for stability and reliability.

• Promotion of Innovation: The role involves promoting innovation and driving for changes that will provide Micron with a technical advantage over its competition. This is vital for maintaining Micron’s competitive edge in the market.

• Mentorship and Development of Others: The role involves actively developing and mentoring others. This is important for the growth and development of the team and the organization.

• Project Management: Developing project management skills within the team ensures efficient execution of projects, leading to timely delivery of technological solutions.

• Technical Decision Making: The role involves making final decisions on risk analysis and project prioritization. These decisions directly impact the direction of technological development.

• Cross-Functional Collaboration: This role necessitates collaboration with various cross-functional teams such as Fab, HBM Technology Development, HBM Design, System Development, and Quality/Reliability team. This collaboration is vital for the holistic development and shipping of end products.

Requirements

• Bachelors/Masters Electrical and Electronics Engineering Degree with 3 years of experience in the semiconductor industry. Product Engineering experience is preferred.

• Demonstrating Strong Leadership Skills and Technical Skills, especially in problem solving with root cause understanding and solution space through in depth circuit analysis.

• Good knowledge of statistics and data analysis tools and scripting.

• Dedicated and highly motivated with a flexible approach towards adapting to different roles in a dynamic working environment (from leading the team to leading technical programs).

• Proven track record of collaborative work within/across teams to address sophisticated business and engineering problems.

• Strong sense of responsibility and accountability towards assigned role with professional work ethic.

• Excellent communication and presentation skills.

• Passionate about people leadership, with a drive toward ongoing learning and development in this area.

• Work on site in Singapore with international travel to US, Taiwan and Japan.

THE ROLE: 

As a Senior Engineer, you will collaborate with various Product Development Groups. This individual serves as a critical technical point of contact to the business, design, platform validation and product engineering teams. We have competitive benefit packages and an award-winning culture. Join us!  

THE PERSON: 

A successful candidate is one who can drive technical decisions independently, has accountability for accuracy, reliability and completeness of assignment results critical to the project’s success. This role allows the opportunity to influence technical decisions that have a significant impact on multiple products or the product line.  

KEY RESPONSIBILITIES: 

• Ensures high uptime, ensures preventive maintenance (PM) execution, and seamless vendor coordination for resolving tools hardware and software issues. Primary advanced toolset coverage: Focused Ion Beam, Reactive Ion etchers, Nano‑probers, Scanning electron microscopes and Transmission electron microscopes 
• The role partners closely with equipment owners, lab operations, EHS, and external OEMs to sustain capability, drive MTBF/MTTR improvements, and enable rapid turns on high‑priority cases.
• Design new lab space with strict environmental control involving vibration, EMI and acoustics.
• Lead structured troubleshooting and root‑cause eradication (5‑Why, Ishikawa, FMEA); convert escapes into standard work and documented fixes
• Serve as single point of contact for OEMs and third‑party service providers; coordinate field service, escalations, and remote diagnostics
• Manage service contracts, PM bundles, and time‑and‑materials events; negotiate scope vs. cost; track vendor KPI adherence and corrective actions
• Enforce LOTO, ESD, chemical/gas handling, UHV safety, and radiation/beam compliance as applicable
• Partner with FA engineers on readiness gates for new methods/fixtures; support tool installation, lab moves, and capability upgrades
• Provide on‑call/shift coverage as needed for bring‑up, critical debug, and factory‑stop events

PREFERRED EXPERIENCE: 

• Hands on maintenance experience with complex capital equipment involving vacuum systems, motion/servo control, pneumatics, high voltage, and embedded SW/FW
• Demonstrated ability in systematic troubleshooting, reading electrical/pneumatic schematics, and using diagnostic tools (oscilloscope, DMM, leak detector, RGA)
• Effective communication with vendors and cross site teams; ability to coordinate multi party interventions under time pressure
• Experience in failure analysis tools, including alignments, stage/probe calibration, column health, and detector
• Knowledge of UHV, turbo/cryogenic pumps, gas handling, plasma sources, beam columns, and vibration/thermal isolation
• Lab‑based role with occasional off‑shift or weekend coverage during critical events and planned PMs
• Some travel for OEM training, factory repair, or acceptance tests may be required

ACADEMIC CREDENTIALS: 

• Bachelor’s degree in Mechatronics Engineering (or Mechanical/Electrical with mechatronics focus)

Job Summary:
Coherent is currently hiring a Senior Manufacturing Engineer to work at our manufacturing site located in Singapore. We are looking for a hands-on candidate for our industry-leading laser technology products. The Manufacturing Engineer will be responsible for developing, optimizing, and maintaining the manufacturing processes used in the production of laser systems and optical assemblies. This role ensures high-yield, cost-effective, and reliable production through continuous process improvement, equipment qualification, and close collaboration with design, quality, and supply chain teams. The engineer will be a key technical link between R&D and production, focusing on scalability, manufacturability, and operational excellence.

Primary Duties & Responsibilities

1. Process Development and Optimization

• Develop, document, and implement manufacturing processes for laser modules, optical assemblies, and related sub-systems.
• Define critical process parameters for optical alignment, bonding, soldering, and laser cavity assembly.
• Conduct DOE (Design of Experiments) and SPC (Statistical Process Control) to optimize yield and minimize process variability.
• Translate R&D prototypes into robust, repeatable production processes.

2. Production Support

• Provide hands-on technical support to production teams for troubleshooting yield issues, process deviations, and equipment downtime.
• Implement root cause analysis and corrective actions for production failures (using tools like DMAIC, FMEA, Ishikawa).
• Support daily manufacturing operations to meet production schedules and performance targets (throughput, yield, quality).

3. Equipment and Tooling Management

• Specify, qualify, and maintain production equipment such as optical benches, alignment stations, bonding systems, and test setups.
• Design and procure custom fixtures, jigs, and alignment tools to improve precision and throughput.
• Ensure calibration and preventive maintenance of manufacturing and metrology tools.

4. Quality and Continuous Improvement

• Work with Quality and Reliability teams to ensure process compliance to ISO 9001 / ISO 13485 standards.
• Develop and update process documentation: work instructions
• Drive Lean and Six Sigma initiatives for process improvement, waste reduction, and cost optimization.

5. Cross-Functional Collaboration

• Interface with Design Engineering for Design for Manufacturability (DFM) reviews and prototype builds.
• Collaborate with Supply Chain and Vendors to ensure component quality and manufacturability.
• Support NPI (New Product Introduction) transitions from R&D to production.

6. Data Analysis and Reporting

• Collect and analyze process data to identify trends and improvement opportunities.
• Implement real-time data collection and traceability systems (MES, SPC dashboards).
• Present yield, performance, and process capability metrics to management.

Education & Experience

• A bachelor’s or master’s degree in engineering or its equivalents with at least 3-5 years of relevant work experience in Photonics or a related manufacturing field
• Possess technical expertise pertaining to Manufacturing, Assembly & Test Processes for mechanical assemblies, PCBA and optical components.
• Strong problem-solving skills and excellent knowledge in Six Sigma DMAIC approach, Lean principles, DOE, SPC, FMEA, GR&R and other quality improvement tools. Certified Six Sigma Green or Black Belt will be an advantage.
• Excellent interpersonal skills with good verbal and written communication skills.
• Self-directed and able to work independently with little or no direct supervision.
   

THE ROLE:

We are the high-end test engineering team providing test solutions for Data Center New Product Introduction (NPI) under the Product Engineering Organization. We do exciting product development for leading-edge technology that will power the next generation processors used for high performance computing, data centers, and enterprise servers.

If you are looking for a fulfilling and challenging career as an engineer leading SLT (System Level Test) Thermal and Board SME (Subject Matter Expert), you are at the right place! As a MTS System Level Technical Lead, you will be responsible for defining, driving and enabling SLT test solution to meet NPI business milestones and KPI (test time, yield, cost, quality .The expectation is to perform leadership to have interaction with Silicon/Board/Power design teams, Product & Test Engineering teams, Customer Quality teams, software & platform teams to ramp GPU coverage with aggressive schedule while debug GPU fallout to ensure high yield. You will experience working with and learning from AMD’s talented engineering teams around the world.

THE PERSON:

We are looking for someone with strong technical, analytical, leadership and problem-solving skills, as well as demonstrating the characteristic of an independent and resourceful individual.

You will be proficient in your understanding about PCB Board and High Power Delivery (above 1kW) design methodology, Thermal dissipation as well as a broad understanding of various industry standards in OCP (Open Compute Project), such as JEDEC HBM3/4, PCIe, I2C/I3C, UEC (Ultra Ethernet Consortium) and UCIe (Unified Chiplet Interconnect Express) etc.

KEY RESPONSIBILITIES:

• Accountable to provide leadership to meet business milestone, cost and quality in GPU system level test area.
• Collaborate with internal teams to drive SLT board and power swim lane from pre-silicon, ASIC initial bring up to HVM (High Volume Manufacturing)
• Conduct engineering evaluations and analysis to drive closure of GPU production issues, qualify cutting-edge high power SLT thermal system for HVM
• Profile or characterize PI (Power Integrity), voltage droop, or power delivery issue observed on SLT platforms in collaboration with board/silicon designers
• Involves collaboration on or assuming the consultative or leadership responsibilities for a specific project or for product development initiatives
• May provide technical supervision or mentoring junior engineers
• Upscale overall team capabilities on low level system debug for AMD data center product families

PREFERRED EXPERIENCE:

• Experience and with good understanding of PCB board and Power Delivery design for high power GPU product (above 1kW), and board lifecycle from Eval to HVM (High Volume Manufacturing)
• Strong expertise with using analyzers and oscilloscopes, and other debug tools
• Knowledge and working experience on GPU and HBM architecture, SoC design and SoC power management features are a strong plus
• Strong and effective presentation, written and verbal communication skills, and the ability to work with geographically distributed product engineering teams
• Proficiency in Windows, and Linux operating systems
• Basic scripting proficiency for automation (Shell script, Perl, Ruby, Python)

ACADEMIC CREDENTIALS:

• BS/MS Electrical Engineering, Computer Engineering, or comparable disciplines

Job Description

• Product owner for photonics devices and optical sensors, responsible for product specification and performance.
• Design and development of embedded and fiber optics modules for sensing and data communication optics hardware and software.
• Collaboration with cross-functional team to develop and prototyping of new products or product derivatives, implementation to prototype functional testing and ramp to production.
• Develop qualification strategy and schedule, drive execution to meet project goals
• Complete project documentation including product specifications, quality specifications, quality plans, risk analysis, FMEAs and other product related documentation.
• Big data processing and analysis to provide management reporting and drive improvement activities.
• Lead complex problem solving efforts and mentor others on best practices. e.g. FMEA, Control Plan, Test plan, quality tools and DOE. e.g. Leads/ coordinates CA of failures using a structured approach.

Requirements

Minimum Qualification:

• Candidate must possess at least a Bachelor or Master in Engineering (Electrical/Electronics/Computer/Photonics)

Experience:

• 5 – 7 years working experience preferably in the semiconductor/component/photonics industry background

Specific Skills / Knowledge:

• Knowledge of photonics technology
• Software knowledge of MS Office, JMP, PDF/Spot-fire/Tibco is a plus
• Excellent inter-personal and communication skills, both written and oral
• Possess the ability to work independently, self-motivated, initiative and deliver tasks on time
• Must be team oriented, positive working attitude, able to multi-tasks in a fast pace environment and work with personnel at all level

• Focus and responsibility for after sales quality related tasks
• Responsible for setting up improvement activities on dedicated products.
• Driving Product Quality Circle within dedicated parties (Sustaining Teams, Platform leaders, HOD’s ..)
• Central part of improvement team in sense of input, coordinator, support on dedicated tasks.
• Supporting escalation in the after sales area (NPI or customer escalation)
• Participating in customer quality calls and task force meeting.
• Close collaboration with the product line & technical support according to the learning's out of onsite trouble shooting and raising preventive knowledge within the organisation.
• Lead all project related documentation and ensure communication (8D-Report, action plans and follow up)
• Initiating and supporting product related analysis
• Interaction with production facility
• Participate customer audits and customer improvement programs.
• Preparation of after sales data and KPI monitoring and reporting.
   

Education

• Minimum Degree in Mechanical / Electrical / Mechatronics / Machining related with 3 years working experience in similar industry.
• Knowledge in project management and Quality Tools

Work experience

• Good understanding of reliability theories & methods (DFMEA, SPC, 8Ds…) and semiconductor manufacturing processes,
• Experienced in quality methods, data analysis and continuous improvement.
• Being in a driver role and push improvements,
• Fast ability to understand company structure and interact with many interfaces
   

Expertise and methodology

• Knowledge in process management for product related business processes, specifically design, engineering, SCM and production (i. e. operational)
• Familiarity with cleanroom protocols (class 10/100) and semiconductor workflows
• Competency in MS-office for data analysis, reporting & presentation
• Familiarity with the Atlassian JIRA system

Other requirement criteria

• Capabilities in analysis, and creation of measures
• Driving and Setting standards and defining roles and responsibilities in own job, processes, and departments
• Agile in sense to drive improvements, but to accept progress on a pragmatic level.
• Flexibility and practice-oriented proceeding, reacting on rapid moving situations and taking appropriate initiatives.
• Experience in handling Die attach equipment is nice to have

Position Summary

As a Senior Manufacturing Equipment Engineer, you will provide technical leadership in smart manufacturing systems within a high-volume consumables environment. Responsibilities include troubleshooting and maintaining optical, mechanical, electrical, and fluidics systems, while driving improvements in equipment uptime and reliability. You will lead and support new product introduction (NPI) and equipment performance enhancement initiatives, applying engineering principles to resolve complex manufacturing and equipment challenges. Additionally, you will be responsible for training and mentoring Technicians and Engineers to ensure performance standards are met, while also providing effective leadership and supervision to your assigned team.

Position Responsibilities:

• Complete required training (e.g. cGMP, safety and work instructions, etc.) within a stipulated time frame.

• Execute tasks strictly following cGMP, Quality, Safety and Work instruction requirements.

• Ensure employees follow safety, quality requirement, and all applicable company policies at all times.

• Ensure proper housekeeping and maintain cleanliness (6S) of the working area.

• Timely report/ escalate any concerns (work-related or personal).

• Meet daily production schedule and performance expectation.

• Able to take on additional tasks or responsibilities when required.

• Competent to guide technician in performing maintenance activities.

• Develop solutions to restore and sustain optimal functionality of manufacturing equipment and systems.

• Demonstrates the ability to identify and qualify alternative replacements for equipment parts, executing required changes through established change control processes

• Improvement work:

  Participate and lead improvement initiatives across areas under broad direction.

  Facilitate an organization's systems and processes relating to continuous improvement (e.g. 6S) and coach team members toward continuous improvement.

  Analyse work practices beyond own scope of work for innovation and improvement opportunities with broad supervision.

  Develop work instructions for each type of equipment.

• Incident investigation and reporting:

  Lead a cross-functional investigation team and able to submit a formal report under broad supervision.

  Mentor team members on good investigation & reporting skills.

  Adapt different techniques and concepts in technical writing for effective engagement with individuals and/or teams.

• Lead and mentor a group of team members to meet production KPI and corporate goals & targets:

  Assist and provide technical support to the shift to meet daily production target and shift KPIs with some guidance.

  Co-ordinate & prioritize activities based on production, equipment and supply to meet the objectives.

• Learning and Development:

  Responsible for the skill development of the team.

  Able to provide guidance to Technician and Engineer on PLC and automation equipment troubleshooting

  Develop On the job (OJT) training programmes for Engineer.

• Exhibits strong proficiency in maintaining and repairing complex smart manufacturing equipment, and in formulating sustainable solutions for recurring equipment problems.

• Implement improvements to the existing equipment maintenance processes with broad supervision.

• Participate in the design of automation equipment to improve product quality, cycle time, and cost.

• Data Collection and Analysis:

  Leverages advanced data analysis techniques to convert raw and complex operational data into strategic insights that optimize equipment reliability, efficiency, and overall operational effectiveness.

• Demonstrates the ability to develop innovative solutions for complex problems.

• Lead technical root cause analysis, incident investigations, and solving problems on issues.

• Be a role model for Technicians and Junior Engineers.

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements:

• Advanced understanding on Electrical / Electronics / Mechanical / Pneumatic

• Ensure compliance with cGMP, Quality, work safety instructions & practices at all times.

• Good project management skills.

• Experience in working on automatic control systems.

• Experience in troubleshooting PLC (e.g. Beckhoff or Allen Bradley PLC) and HMI process control automation system.

• Experience working on Server/Client and Infrastructure will be an added advantage.

• Ability to draft engineering drawings.

• Complete tasks in a safe and efficient manner.

• High level of discipline and integrity.

• Able to undertake multiple tasks.

• Able to undergo job rotation/ cross training.

• Able to work in noisy environment with appropriate personal protection equipment (PPE).

• Able to work in chemical environment with appropriate personal protection equipment (PPE).

• Must be able to identify different colors for work purposes. In Illumina, we handle components/chemicals with different colors, and it is necessary to be able to differentiate and identify the correct components/chemicals (using visual) during operation.

• Possess a positive attitude and sense of urgency.

• Meticulous, keen attention to details and organized.

• Be agreeable to work 12 hours (from 0800 to 2015 for the day shift and from 2000 to 0815 for the night shift) rotating shifts (Monthly rotations from day to night and vice versa) with staggered break times in accordance with the roster when required.

• Able to safely lift and handle weights up to 15 kg, with occasional requirements to manage heavier loads.

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Preferred Experience/Education/Skills:

• Diploma or equivalent in Electrical, Electronics, Mechanical or Mechatronics.

• Bachelor’s Degree in Electrical, Electronics, Mechanical or Mechatronics will have added advantage.

• 10+ years for Diploma or 4+ years for Bachelor’s degree of working experience in manufacturing/production environment.

• Experience in GMP controlled manufacturing / production environment.

• Exposure to data analytics, including the ability to analyze equipment performance, identify trends, and support data-driven decision making, is an added advantage.

• Experience or familiarity with predictive maintenance methodologies (e.g., condition monitoring, failure prediction, reliability analysis) to improve equipment uptime and operational efficiency is preferred.

• Knowledge or exposure to agentic AI development, intelligent automation, or AI-driven optimization in manufacturing environments will be considered an added advantage.

• Familiarity with digital and analytics tools such as Statistical Process Control (SPC), Python, Power BI, Tableau, and Power Automate for data analysis, visualization, and workflow automation is an added advantage.

• Exposure to application, coding language and dashboard development tools such as python, Streamlit, Angular, and NestJS for building data-driven applications or internal tools is an added advantage.

THE ROLE:

As a senior staff member of the product characterization team, you will evaluate the performance of AMD AECG products, develop, lead and characterize the next generation Memory Controller IPs.

THE PERSON:

• Strongly motivated individual from post-silicon validation background.
• Excellent communication and presentation skills, demonstrated through technical publications, presentations, training, executive briefings, etc.
• Adept at collaboration and mentorship skills to train and guide fellow engineers and elevate the skills of the team around you.

KEY RESPONSIBILITIES:

• Gain expertise into the AMD SoC architecture to characterize next generation Memory Subsystem (Controller, PHY and IO) for various supported protocols such as DDR4, LPDDR4, DDR5, LPDDR5, DDR6 and LPDDR6.
• Understand Pattern development nuances and guide the team for bench data collection and debug with lab instruments when necessary.
• Work closely with cross functional teams from design and firmware side to identify key new features, firmware stability and ensure proper test coverage for the same.
• Drive continuous improvement initiatives on automated test scripts and test frameworks for efficient data collection, test-time optimization and data analysis.
• Stay updated with the latest developments in Memory specifications and trends to inform product strategy and direction
• Statistical data analysis to post process volume results for data correlation across Process corners and outlier analysis.
• Responsible for isolating the issue to a specific area such as test gaps, SW bug, silicon bug, or process deviation using bench setup and instill good debug practices in the team.
• Drive cross-functional discussions to address the issues uncovered from debugs and collaborate for ensuring screens are in-place for gaps identified.

PREFERRED EXPERIENCE:

• Extensive years of experience into post-silicon validation with strong background on SoC validation and system level testing.
• Technical leadership experience leading a small group of senior engineers.
• Strong understanding of ARM SoC architecture and Memory protocols such as DDR5 and LPDDR5.
• Experienced on bench testing and debug skills with lab instruments usage.
• Proficiency in using test equipment such as oscilloscopes, logic analyzers and protocol analyzers.
• Experienced in Linux environment, data analysis and scripting languages (e.g. Python, Perl) for automation and data processing.
• Strong communication and leadership skills, including data presentation and ability to work well in a group environment that spans across continents.
• Experience with AMD/Xilinx Vivado and FPGA design flow is a plus.

ACADEMIC CREDENTIALS:

• BS in EE, CS, ECE or related field; MS preferred.

Company Overview

TESSOLVE ENGINEERING SERVICES PTE. LTD. is a technology company specializing in engineering services, supporting product development and production for semiconductor and electronics industries.

Job Summary

As a Senior Product Engineer, you will provide comprehensive engineering support across product lifecycles, drive debug and yield improvement activities, and collaborate with cross-functional teams to ensure successful product testing and production release.

Responsibilities

• Provide engineering support for RF, Mixed Signal, Digital, and Power Management products through all development and production phases
• Collaborate with test engineering and production support teams to lead debug activities, reliability qualification, and yield enhancement efforts
• Communicate technical product status and progress to management and relevant stakeholders
• Establish and clarify product testing and production release requirements with customers
• Coordinate with foundries, test subcontractors, and SAT houses to resolve production issues promptly
• Generate detailed status reports, test limits (guard bands), correlation analyses, and yield summary reports at each project phase
• Support initiatives to improve yield, reduce test time, and lower retest rates during production ramp-up

Preferred competencies and qualifications

• Diploma or Degree in Electronics or Electrical Engineering
• 5 to 8 years of relevant experience in Product or Test Engineering, preferably with foundry process background
• Experience leading technical teams is an advantage
• Solid understanding of test concepts for digital, PMIC, Mixed Signal, and RF products
• Hands-on experience with Advantest 93K Automated Test Equipment (ATE)
• Proficient in statistical data analysis and data mining techniques
• Exposure to statistical analysis software such as JMP, CEDA, Data Power, or Optimal Plus is a plus
• Knowledge of scripting languages (Perl, Java, VBA) and automation in reporting is beneficial
• Strong verbal and written communication skills with the ability to work independently

We are seeking a highly motivated and results-driven Senior Product Development Engineer to join our innovative team. In this role, you will be responsible for the development and execution of product strategies to ensure our products meet customer needs and business objectives. You will collaborate cross-functionally with BD, engineering, marketing, Pre-Sales, and customer support to drive the lifecycle of products from concept through launch and beyond.

Key Responsibilities:

Product Strategy & Roadmap: Assist in the development and maintenance of the product roadmap, ensuring alignment with the company’s vision and strategic goals.

Customer-Centric Development: Define product requirements based on customer feedback, market trends, and competitor analysis.

Cross-Functional Collaboration: Work closely with BD, engineering, design, Pre-sales, and marketing teams to bring product features to market.

Product Launch: Lead the go-to-market strategy for new product launches and feature releases, ensuring that all stakeholders are aligned.

Lifecycle Management: Manage the full product lifecycle, including prioritizing feature enhancements, bug fixes, and performance optimizations.

Qualifications:

• Bachelor/Diploma in Engineering or related field
• 5 years or above of experience in product management or related fields (e.g., product marketing)
• Strong understanding of product development processes, agile methodologies
• Excellent verbal and written communication skills, with the ability to influence and align teams and stakeholders
• Ability to analyze complex problems, think strategically, and make data-informed decisions
• Strong customer-centric mindset with experience conducting customer interviews, surveys, and usability testing

Interested candidates can forward their CVs in MS Word format to connie@triton-ai.com

• Reg No. R1875181
• Triton AI Pte Ltd
• License no. 21C0661

NCS is a leading AI Tech Services company. With a 15,000-strongteam across the Asia Pacific, NCS scales its platforms and capabilities to provide clients with greater agility and AI expertise across a range of Industries. Embracing a strong ecosystem of global partners, NCS transforms technology services delivery combining AI with digital resilience to drive real business impact. NCS is a subsidiary of the Singtel Group.

The Functional Testing Engineer is responsible for ensuring the quality, reliability, and functional accuracy of the organization’s software platforms, particularly systems related to video analytics and video management. The role focuses on validating that software features and system integrations meet defined requirements through structured functional testing, test planning, and defect analysis across the software development lifecycle.
Working closely with development and product teams, the engineer reviews system designs, develops and executes test cases, and analyzes test results to identify issues and improve product quality. The role requires a solid understanding of software QA methodologies, experience with both white-box and black-box testing, and the ability to use programming or scripting languages (such as Java or Python) and SQL to support test execution, data validation, and troubleshooting of system behavior.

Responsibilities | CORE

• Mentor the Junior QA engineers and efficiently manage the resources to support the projects and ensure the quality delivery
• Define test strategy and test plan based on software development plan for the projects
• Oversees and actively participates in test execution and the development of testing artefacts, including: performance test requirements, defect tracking and reporting, performance test plans, cases, scripts, reports, etc. for assigned projects
• Consult with product development to evaluate system interfaces, operational requirements, and performance requirements of overall system
• Define test methods and create test plans for new or updated software projects to determine if the software will perform accurately and reliably according to documented requirements as well as established standards under both normal and abnormal conditions
• Recommend design improvements or corrections to engineers throughout the development process
• Maintain effective communication with the project software engineers on project limitation, capability, performance requirement and hardware interface changes
• Monitor program performance after implementation to prevent reoccurrence of program operating problems and ensure efficiency of operation
• Formulate and design software systems, using scientific analysis and mathematical models to predict and measure outcome and consequences of design
• Create test tools that facilitate data gathering and test method execution
  Python & Bash Scripting: Write and maintain Python, Bash script or PowerShell script for automation, deployments, and troubleshooting.
• Troubleshooting & Monitoring: Proactively monitor systems, perform root cause analysis, and ensure the reliability of the platform.
• Collaboration: Work closely with other teams to collaborate on any tasks when required.

Qualifications

• Familiar with at least one programming language, like Java, Python
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with both white box and black box testing
• Hands on experience with automated testing tools
• Excellent problem-solving and analytical skills
• Strong leadership and communication skills
• Experience in microservices architecture and distributed systems.
• Hands-on experience with containerization technologies such as Docker and orchestration using Kubernetes.
• Utilize basic knowledge of Linux Based OS to manage servers, deployment environments, and perform necessary scripting.
• Familiarity with cloud platforms such as AWS, GCP, or Azure.
• Strong skills in troubleshooting and root cause analysis within distributed systems.

Nice-to-Have:

• Basic knowledge of AI concepts and video analytics technologies like OpenCV or FFmpeg.
• Experience working in an Agile/Scrum development process
• Experience with performance and/or security testing is plus
• Experience working in a multinational corporation or worldwide enterprise
• Experience to use selenium testing framework
• Self-motivated
• Fluent in English writing and speaking

Soft Skills:

• Excellent communication and collaboration skills (written and verbal)
• Ability to work effectively in a fast-paced, cross-functional team environment.
• Detail-oriented with a commitment to deliver high-quality work.
• Strong interpersonal skills with ability to work both independently and as part of a team
• Strong time management, willingness to learn new technologies

Additional Information

We are driven by our AEIOU beliefs—Adventure, Excellence, Integrity, Ownership, and Unity—and we seek individuals who embody these values in both their professional and personal lives. We are committed to our Impact: Valuing our clients, Growing our people, and Creating our future.

Together, we make the extraordinary happen.

Learn more about us at ncs.co and visit our LinkedIn career site.

Responsibilities :

• Meet Departmental goals on Cost, Responsiveness & Quality objectives
• Develop and establish work instructions, routing, and workmanship standards
• Track & manage CAPEX spending within the allocated budget
• Establish preventive maintenance and calibration of production equipment
• Supervise and train subordinates and implements company policy
• Drive LEAN opportunities on manufacturing lines
• Provide an area of technology expertise
• Install and commission new equipment
• Provide technical resource & training to staff
• Lead new product development / process start-ups / transfers and change management
• Lead the planning and executing yield / quality / process / UPH / machine / OEE improvement initiatives
• Lead in developing and promoting new technologies and processes
• Plan and lead engineering team to improve manufacturing system / processes

Requirements :

• Degree in Engineering
• 10 years of relevant experience
• Strong experience in Manufacturing Process
• Good written and communication skills
• Possess strong time management, analytical problem-solving and decision making skills
• Able to start work in short notice

Job Description

• Provide engineering support for wide range of products (RF / Mixed Signal /

• Digital)/Power Management) through all phases from development to production release

• Work closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement

• Close interaction with Product Test Engineering/Design team and Communicate technical product status to management

• Establish with customers on product testing requirements and production release requirements

• Follow up with Foundries and test subcontractors/SAT houses to resolve all production issues.

• Provide detailed status reports at each phase, test limit (guard band) generation, correlation and yield summary reports

• Support Yield improvement, Test Time Reduction and retest rate improvement for production ramp

Job Requirements

• Graduates from Diploma/ Degree in Electronics / Electrical Engineering

• 5-8 years relevant experience on the Product/Test Engineering with foundry process background preferred.

• Experience in leading the technical team is added advantage.

• Solid understanding of test concepts on digital , PMIC, Mixed Signal and RF products

• Hands on experience using Advantest 93K ATE

• Good experience with statistics and data mining.

• Strong Data analysis skill & exposure on any Statistical Analysis Software’s JMP,

• CEDA or Data power and Optimal plus tool knowledge is a plus.

• Knowledge in scripting (perl/java/vba) and automation in reporting is a plus.

• Very strong verbal and written communication skills and able to work independently