Total 58 Engineering job vacancies

Job Description:

• Plan, coordinate and execute mechanical maintenance activities for plant, production or industrial equipment.
• Carry out preventive maintenance, corrective maintenance, troubleshooting and repair works.
• Maintain mechanical equipment such as pumps, compressors, valves, piping, gearboxes, vessels, heat exchangers and related systems.
• Support equipment inspection, servicing, installation, modification and improvement works.
• Coordinate with operations, engineering, contractors and vendors on maintenance activities.
• Support plant shutdown, turnaround, breakdown recovery and equipment reliability improvement.
• Investigate equipment issues and recommend corrective or preventive actions.
• Ensure all maintenance works comply with safety, quality, environmental and company requirements.
• Prepare maintenance reports, work records, inspection checklists and technical documentation.
• Senior candidates may supervise technicians, contractors or maintenance activities.

Job Requirement:

• Diploma / Degree in Mechanical Engineering, Mechatronics or related discipline.
• Relevant experience in mechanical maintenance, plant maintenance, equipment maintenance or industrial maintenance.
• Candidates from chemical, petrochemical, oil & gas, terminal, power plant, manufacturing or process industry are welcome.
• Experience with pumps, compressors, valves, piping, gearboxes, static or rotating equipment will be an advantage.
• Able to troubleshoot mechanical faults and provide practical solutions.
• Experience in contractor coordination, shutdown, turnaround or maintenance planning will be an advantage.
• Knowledge of permit-to-work, risk assessment or plant safety procedures is preferred.
• Good communication, coordination and problem-solving skills.
• Candidates with supervisory experience may be considered for senior roles.

------------------------------------------------------------------------------------------------------------------------------------------------------

Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability. Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability.

By sending your job application/resume to us, it shall bedeemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Bernard Pang
EA Personnel Reg No.: R24119695

Responsibilities

· Troubleshoot and repair a variety of complex powder processing, blending and high-speed packaging equipment.

· Repair and install various equipment, guards and piping using lifting devices if required.

· Perform PM’s and work orders as well as project work.

· Disassembly, diagnosis, repairs and re-assembly of machinery to hygienic and sanitary standards.

· Participate in the development of a Predictive Maintenance program at Tuas.

· Complete all necessary reports and documentation via hardcopy and computer.

· Maintain a clean and sanitary environment in accordance to all safety and GMP policies.

· Be able to use independent judgment and work well within a team concept.

· Interact with internal and external customers in a professional manner.

· Follow all cGMP requirements to ensure proper manufacturing environment.

· Actively participate in the resolution and elimination of downtime issues.

· Assist in the creation of SOP’s, checklist, and work instructions.

· Provide training and guidance to new employees.

· Complete all necessary transactions, reports and documentation with accuracy and timeliness.

· Maintain a clean and sanitary environment to 5S or similar standard.

Requirements:

· Nitec/Higher Nitec/Diploma in Mechatronics equivalent qualifications.

· At least 3 years of industrial mechanical maintenance experience.

· Proficiency in SAP and Ms Office is a must.

· Familiar with predictive and preventative maintenance technologies.

· Previous experience in a food or pharma manufacturing environment is preferred.

About our group:

Sputtering is the heart of media process in recording media organization.  We are a dynamic team working in the world’s largest state-of-the art magnetic media manufacturing environment with highly automated processes, latest technology and advanced control systems.

We pride ourselves on delivering committed equipment performance and operational objectives through effective maintenance, technology, and innovation to help Seagate succeed.  Our team is made up of committed, talented, and friendly people passionate about our job, believing in people’s well-being and people’s development.

About the role - you will:

• Own and maintain sputter equipment performance
• Ensure equipment meets uptime, quality, and OEE targets
• Perform advanced troubleshooting and root cause analysis for equipment issues
• Drive maintenance excellence
• Develop, execute, and optimize preventive and corrective maintenance strategies
• Support reduction of unscheduled downtime through reliability improvements
• Technical problem solving & improvement
• Analyze process/equipment data to identify trends and improvement opportunities
• Implement engineering solutions to improve yield, uptime, and cost performance
• Support production operations
• Work closely with production, maintenance, and cross-functional teams to resolve issues
• Provide technical support during shift operations and critical tool recovery
• Process and equipment optimization
• Define and optimize process parameters and control points
• Support process qualification, engineering trials, and change implementation
• Documentation and system improvements
• Develop and update SOPs, PM procedures, and troubleshooting guides
• Participate in continuous improvement initiatives (Kaizen, cost reduction, automation)
• Compliance & safety
• Ensure adherence to safety, environmental, and audit requirements (e.g., RBA, internal audits)
• Maintain safe working practices in cleanroom environment
• Collaboration and knowledge sharing
• Provide technical guidance and mentorship to technicians and specialists
• Support structured training and effective knowledge transfer within the team
• Promote the adoption of AI-driven tools and digital solutions to enhance troubleshooting, predictive maintenance, and decision-making
• Encourage the use of AI for data analysis, pattern recognition, and continuous improvement initiatives

About you:

• Strong problem-solving capability with a structured approach to root cause analysis 
• Good data analysis, troubleshooting, and diagnostic skills, with exposure or interest in applying AI-driven insights for equipment performance improvement 
• Familiar with equipment control systems, automation, and standard engineering tools; knowledge or willingness to learn AI/analytics applications is an added advantage 
• A collaborative team player with strong communication and cross-functional engagement skills

Your experience includes:

• Degree or Diploma in Mechanical, Electrical, Mechatronics, or a related Engineering discipline 
• 2–5 years of relevant experience in equipment engineering or maintenance within semiconductor, media, or vacuum environment
• Hands-on exposure (through work, projects, or internships) in vacuum systems, sputter equipment, or thin film processing technologies will be an advantage 

Responsibilities:

• Responsible for the development of ILS deliverables of the ship maintenance programme that meets the customer's requirements effectively and on time.
• To support the department in designing and implementation of the ILS plan for delivering technical documentation, training and ILS data to customer.
• To support the department in designing and implementation of the ILS plan for determination of Spares and subsequent purchase and logistics arrangements for delivery to customers on time.

Requirements:

• Diploma/Degree in Marine or Mechanical Engineering related
• Prior knowledge of Mindef ILS (Integrated Logistics Support) methodology will be an advantage
• Knowledge and Work experience in maintenance management program for marine vessels is desirable
• Knowledge of maintenance planning software and methodology is desirable
• Comfortable with technical documentation work
• High proficiency in MS Office Suite
• Good written, verbal communication skills in English is required
• Must possess the ability to go on board vessels occassionally when required
• Occassional lifting and carrying of physical documents or parts is required
• Only Singapore Citizen wiill be considered for this role

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Job Description

To manage service business units, include but not limited to:

• Ensure service teams carry out day-to-day maintenance activities and to minimize elevator/escalator breakdowns
• Manage day-to-day service operations and functions; manage quality, environment and safety compliance
• Manage call-back rates and sick units, initiate general corrective and prevention measurement to improve performance and reliability objective
• Manage follow up actions relating to customer complains, conduct periodic inspections and visitations to ensure fulfillment and customer satisfaction objectives.
• Cultivate staff development and welfare, includes motivation, counselling, appraisal and rewards.
• Communication and build rapport with various levels of internal and external customers and service providers.
• Work together with Sales colleagues to ensure all traditional and non-traditional repair jobs are advised to customers, follow-up until successful sales and implementation
• Conduct cost analysis and monitor the utilization of parts and labor to ensure profit margins align with established targets
• Provide support on ad hoc assignments and tasks to ensure smooth workflow.

Job Requirement:

• Candidate must possess at least a Degree or Diploma in Mechanical, Electrical, Electronics, Mechatronic Engineering or its equivalent.
• 3 to 5 Year(s) of working experience in lift industry and sound knowledge in lift and escalator technology, including customer relationship management may also be considered.
• Mature personality, with well-balanced customer focus
• Proven communication and inter-personnel skills, negotiation skills with all levels of internal and external customers.
• Achiever with self-motivation attributes.
• Good at team building and staff motivation

We regret to inform that only shortlisted candidate will be notified

Utilities Engineer (Facilities Maintenance/ Steam Boiler/ Tuas)

Location: Tuas 

Industry : Pharmaceutical Nutrition

Salary : Up to $4,000 depending on experience

Our client is a global healthcare nutrition company, specializing in infant, maternal, and adult nutritional products. The company operates within the nutrition and consumer healthcare industry, with STRONG focus on quality manufacturing, compliance and supply chain operations.

Main Purpose of Job                                                              

• Responsible for the daily operation and maintenance of the utility systems and facilities to provide uninterrupted utilities supply and engineering services in supporting the manufacturing operations.                                                                                     

Responsibilities

• Perform routine operation, routine planned maintenance, and ad-hoc corrective maintenance on utility systems and facilities                                                   
• Coordinate and supervise contractors/vendors in performing their duties in accordance to procedures.                                                                
• Ensure proper documentation of all maintenance, repair and services activities in accordance to procedure.                                                            
• Maintain good housekeeping and cleanliness of work areas.                                                  
• Responsible for following safe working procedures and principles introduced at the workplace, not engaging in any unsafe act that may endanger yourself or others working around you, and using, in proper manner, any personal protective equipment, devices, equipments or other means provided to secure your safety, health and welfare while working.
• Execute all duties faithfully and responsibly in accordance to written procedures and to immediately report all observations of GMP non-conformances. 
• To take ownership in gaining knowledge and demonstrating the expected Environmental protection, Health and Safety attitude and behavior at the workplace.
• Be knowledgeable with applicable Company Quality Standards, procedures and guidelines. To ensure continuous compliance to GMP in designated areas of responsibilities and to immediately report all observations of GMP non-conformances.

Requirements

• GCE Level, Technical qualifications, Diploma in Electrical / Mechanical / Marine / Mechantronic / Air Conditioning / Refrigeration or equivalent.
• Relevant working experience in the operation and maintenance of Pharmaceutical / Food / Petrochemical / Wafer / Semiconductor industry.
• MOM 1st Class or 2nd Class Steam Boiler Attendant Certificate/Electrician Grade License Electrical Worker Certificate.
• Experience in cGMP, ISO 9001/14001 & OSHA18001 environment.
• Willingness to work on rotating shifts.

Lim Pey Chyi (Apple) - Apple.lim@manpower.com.sg

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

Responsibilities

• Perform troubleshoot, calibration, repair and maintenance of assigned testers and probers platform
• Ensure equipment are in optimum production condition, with minimum downtime and running at yield specified
• Support new product offload to production and perform new machine buyoff / evaluation
• Initiate improvement project or DOE for process or yield improvement
• Maintain spare parts inventory

Requirements

• Degree or Diploma in any Engineering field or equivalent
• Prior experience in troubleshooting equipment, maintenance, and repair
• Experience in manufacturing environment is an advantage
• Analytical, problem-solver with good verbal and written communication skills
• Entry level candidates are welcome to apply

Resident Engineer (RE - Civil & Structural/Geotechnical)

a. Experience:

Minimum of 5 years of relevant experience as a Civil & Structural Engineer, with at least 5 years in supervising works on projects of similar size and complexity, particularly major building construction and deep excavation works.

b. Qualifications:

Must possess a Civil and Structural Engineering degree recognized by the Professional Engineers Board of Singapore.

c. Accreditation:

Accredited by the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.

d. Responsibilities:

Lead the C&S site staff to monitor, supervise, and inspect works as directed by CAG, QP(S), QP(Geo), project consultants. Exhibit strong leadership qualities, organizational abilities, and interpersonal skills.

e. Knowledge:

Be conversant with statutory codes and site supervision requirements, quality control procedures, construction administration, and submission of progress reports.

f. Skills:

Demonstrate strong supervision and leadership abilities.

g. Flexibility:

Must be willing to work shifts.

Responsibilities

• Responsible for troubleshooting, calibration, repair and maintenance of assigned testers and probers platform.
• Ensure equipment are in production condition with minimum downtime and running at yield specified.
• Responsible to perform prober preventive maintenance and calibration.

Requirements

• Diploma / NITEC in Electronic / Electrical / Mechanical or any Engineering field.
• Prior experience in semiconductor or manufacturing environment is advantageous.
• Possesses strong analytical, problem-solving and communication skills.
• Able to commit to 12-hr day shift.
• Entry level candidates welcome to apply.

Responsibilities:

• Work as part of a maintenance team ensuring fleet availability for client
• Manage planned maintenance activities
• Conduct troubleshooting of systems onboard vessels
• Supervise and guide workers in mainenance tasks
• Coordinate with suppliers , contractors when required
• Coordinate with Owner Rep on issues pertaining to maintenance task
• Any tasks as directed by Site Manager

Requirements:

• Diploma or NTC in Mechanical or Marine Engineering or related
• Possess knowledge in Mechanical, Engines and Electrical principles
• Able to communicate effectively with internal and external stakeholders
• Able to work during weekends and public holidays and on odd-hours
• Willing to work in Brani area, with company transport provided

Other Information:

• Official Work Hours: 7am - 5pm
• 5 Days Week
• Company Transport provided to Brani or at Harbor Front MRT

Industry: Petrochemical
MNC Environment
Exciting career opportunity

Responsibilities:

• Plan, schedule, and follow up on daily maintenance activities with contractors and internal teams to ensure timely and effective execution. Record daily outcomes and prepare schedules for upcoming work.
• Investigate and resolve faults or failures in Equipment’s supporting both corrective and preventive actions to ensure reliable operation.
• Liaise with in-house and external contractors for day-to-day services and major shutdown maintenance activities, including work planning, site coordination, and communication with production teams.
• Assist in developing and enhancing long-term maintenance strategies to improve equipment reliability and prevent recurrence of issues, in collaboration with production and contractors.
• Monitor maintenance spare parts inventory, including receiving and issuing updates, and assist with purchase requests for tools, spare parts, and maintenance services.
• Ensure accurate and timely completion of documentation such as calibration records, maintenance files, work orders, and compliance with ISO standards and internal SOPs.
• Uphold Company’s EHS policies, support safety and environmental management systems (e.g., ISO 9001, ISO 14001, OHSAS 18001), act responsibly for workplace safety, and contribute to minimizing Major Accident Hazards (MAHs) to ALARP levels.

Requirements:

• Diploma in Mechanical Engineering or the equivalent.
• Min 5 years’ experience as Maintenance supervisor/Engineer in a chemical plant.
• Must have knowledge and hand-on troubleshooting experience on Chemical Plant equipment’s.
• Basic understanding of Maintenance technology, Mechanical equipment’s & manufacturing process.
• Good team player and communication skills with right attitude towards work progress.

Job ID: X966Y4RY

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to carlo@peopleprofilers.com

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

+65 6950 9747   

EA Licence Number: 02C4944

Registration Number: R1100011

EA Personnel: Carlo Antonio Dela Cruz

Job Description

• Perform Store receiving, verification of goods receive/Issuing out and storing of goods.
• Perform Store administrative work
• Manage storeroom inventory
• Provide technical support when necessary.
• Perform basic repair, inspection, reassembly, refitting, and adjusting products as required.
• Maintain work area clean, safe, and orderly.
• Servicing & repair landscape equipment / vehicles
• Service / Maintenance/ Repair of motor vehicles and equipment including engine checks, chassis checks, battery checks and identify mechanical defects or faults and replace defective or worn parts.
• Carry out component overhaul
• Carry out fault diagnosis
• Fundamental electrical knowledge to troubleshoot electrical systems and usuage of Engine Diagnostic Equipment to troubleshoot “Check Engine Light’ to identify electrical faults, perform repairs and replace defective parts.
• Provide roadside assistance to troubleshoot, identify and rectify faults on spot.
• Ensure compliance to health and safety polices and procedures in the course of work inside workshop area at times.
• Maintain the cleanliness and neatness of the workshop area thru good housekeeping.
• To perform any other ad hoc tasks assigned.

Requirements:

• Relevant working experience highly welcomed
• Positive attitude, willingness to learn and good team player
• Candidate must possess at least Primary/Secondary School/"O" Level in Others or equivalent.
• At least 1 Year of working experience in the related field is required for this position.
• Possess valid Class 2B/ Class 3 and above will be a bonus

Responsibilities

• Responsible for troubleshooting, calibration, repair and maintenance of assigned Testers and Handlers platform.
• Ensure equipment are in production condition with minimum downtime and running at yield specified.
• Responsible for tracking, monitoring and reporting daily equipment downtime.
• Responsible for daily house keeping and any other responsibilities as assigned.

Requirements

• Diploma / Higher NITEC / NITEC in Electronic / Electrical / Mechanical/ Mechatronics Engineering or equivalent.
• Specialized knowledge of equipment, testers, handlers, etc is preferred.
• Possess Trouble shooting skills on equipment maintenance and repair.
• Possess strong analysis and good teamwork.
• Good communication and presentation skills.
• Able to commit to either 12-hr permanent day / night shift.

Job Responsibilities:

• Ability to complete the repair scheme in accordance with the requirements & instructions of Rolls-Royce Engine Manuals (e.g. SPM - Standard Practices Manual, SB – Service Bulletin) & TV (Technical Variance)

• Operation of special tools for the replacement of shank nuts on aero engine components

• Operation of specific tooling for installation, inspection & torque check during the replacement of wirethread inserts on aero engine components

• Operation of precision jig and fixtures for the replacement of engine spares (studs, pins, pads, washers, liners, bushings etc.) on aero engine components

• Operation of pneumatic tools (die grinders & air drills etc.) for repair and precision inspection instrument for quality control in minor damage repair on aero engine components

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Chemical storage, Hand Tools storage)

Requirements:

• Minimum 3 years in aero engine components/parts hand fitter/mechanic experience

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

Job Responsibilities:

• Ability to operate High Pressure Waterjet machine to remove metal sprays coatings from aero engine components in accordance with the requirements & instructions of Rolls-Royce Engine Manuals

• Setting up, operating, and performing routine machine maintenance of High Pressure Waterjet Machine

• Familiar in setting and control of different parameters for the validation of process

• Familiar in using different precision measuring instruments for dimensional inspection

• Troubleshooting any issues that arise

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Fixture and Tooling storage)

Requirements:

• Minimum 3 years relevant working experience in operation of High Pressure Waterjet machine

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

Job Responsibilities:

• Responsible for the programming, set-up, and operation of coordinate measuring machines (CMMs) to ensure accurate measurement of aero engine components in accordance with the requirements & instructions of Rolls-Royce Engine Manuals

• Apply advanced logic and methodologies in the development and optimization of CMM programs (Modus is preferable)

• Effectively identify, analyze, and resolve programming-related issues that arise

• Perform routine maintenance and calibration checks on CMM as required

• Complete inspection documentation and report discrepancies to ensure accuracy and compliance with regulations and quality standards

• Adhere to all safety regulations and maintain a clean, tidy and organized workspace

Requirements:

• Minimum 3 years relevant working experience in aviation industry

• Minimum 2 years experience working as a CMM operator

• Expertise in CMM programming and use of relevant software applications

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Demonstrate proficiency in interpreting engineering drawings, including comprehensive understanding of Geometric Dimensioning and Tolerancing (GD&T) symbols

• Good understanding of CMM technical specifications

• Good command of written English and engineering analytical skill

• Ability to troubleshoot and provide solutions to problems

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

Job Responsibilities:

• Ability to carry out repair and modification on aero engine components, manufacture the aero engine spares in accordance with the requirements & instructions of Rolls-Royce Engine Manuals

• Preparing CNC program and conducting first article inspections to ensure quality

• Executing programs to repair the aero engine components or fabricate the aero engine spares according to the engineering drawing of Rolls-Royce Engine Manuals

• Setting up, operating, and maintaining of 5-axis CNC Milling machine

• Familiar in usingdifferent measuring equipment for dimensional inspection

• Troubleshooting any issues that arise

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Fixture & Tooling storage & Cutting tools storage)

Requirements:

• Minimum 3 years relevant working experience in programming and operation of 5-axis CNC Milling Machine

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Able to compose CNC programs on Faunc, Siemens, Heidenhain or other systems for machining operation

• Proficient in SolidWorks or Mastercam is an advantage

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

Job Responsibilities:

• Ability to carry out Superfinishing (also known as Vibropolishing or Vibrobarrelling) of aero engine blade and vane airfoils using non-metallic media to produce a fine surface finish in accordance with the requirements & instructions of Rolls-Royce Engine Manuals

• Ability to make-up and control of Superfinishing Media

• Setting up and operating the Vibro-Polishing Machine

• Monitoring the machining cycle to ensure quality

• Familiar in using different precision measuring equipment for chordal width, trailing edge thickness measurement

• Familiar in checking the surface finish using suitable surface finish measuring machine

• Performing quality inspections of finished products

• Conducting routine machine maintenance

• Troubleshooting any issues that arise

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Fixture & Tooling storage)

Requirements:

• Minimum 3 years relevant working experience in operation of Vibro-Polishing machine

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

Job Responsibilities:

• Ability to conduct Shot/Glass Bead Peening tasks in accordance with National Aerospace and Defense Contractors Accreditation Program (NADCAP) requirements & Rolls-Royce instructions

• Ability to make-up and media control for Shot, Glass Bead Peening

• Executing programs to carry out shot/glass bead peening on the aero engine components according to the Repair Scheme requirements

• Setting up, operating, and conducting routine machine maintenance of Shot/Glass Bead Peening Machine

• Performing inspections of peened surfaces for uniform coverage according to the Repair Scheme requirements

• Troubleshooting any issues that arise

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Fixture & Tooling storage)

Requirements:

• Minimum 3 years relevant working experience in Shot/Glass Bead Peening machine

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

Job Responsibilities:

• Ability to conduct automatic circumferential welding build up worn or damaged areas on the aero engine components in according with the requirements & instructions of Rolls-Royce Engine Manuals

• Proper preparation prior to welding

• Setting up, operating, and conducting routine machine maintenance of High Precision 3-5 axes Dabber Welding System

• Performing inspections of welded area according to the Repair Scheme requirements

• Troubleshooting any issues that arise

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Fixture & Tooling storage)

Requirements:

• Minimum 3 years relevant working experience in operation of Dabber Welding System

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

We are hiring Mechanical Maintenance Supervisor / Engineer for petrochemical, chemical, terminal, or process plant environments.

Responsibilities:

• Plan, coordinate and supervise mechanical maintenance activities for plant equipment and facilities.
• Carry out preventive maintenance, corrective maintenance, troubleshooting and repair works.
• Oversee maintenance works involving static and rotating equipment such as pumps, compressors, blowers, heat exchangers, vessels, piping, valves and agitators.
• Coordinate with operations, engineering, contractors and vendors to ensure maintenance works are carried out safely and efficiently.
• Support plant shutdown, turnaround, modification and improvement projects when required.
• Investigate equipment failures, recommend corrective actions and support reliability improvement.
• Ensure all maintenance activities comply with company safety, quality and environmental standards.
• Prepare maintenance reports, work records, job plans and related documentation.

Job Requirement:

• Diploma / Degree in Mechanical Engineering or related discipline.
• Relevant experience in mechanical maintenance within petrochemical, chemical, oil & gas, power plant, terminal, manufacturing or process industry.
• Good knowledge of static and rotating equipment maintenance.
• Experience in supervising contractors, maintenance teams or plant maintenance activities will be an advantage.
• Able to troubleshoot mechanical equipment issues and recommend practical solutions.
• Knowledge of safety procedures, permit-to-work system, risk assessment or ISO standards will be an advantage.
• Good communication, coordination and problem-solving skills.
• Candidates with supervisory experience may be considered for senior roles.

Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability. Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability.

By sending your job application/resume to us, it shall bedeemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Bernard Pang
EA Personnel Reg No.: R24119695

Job Responsibilities:

• Ability to carry out repair and modification on aero engine in accordance with the requirements & instructions of Rolls-Royce Engine Manuals

• Preparing CNC program and conducting first article inspections to ensure quality

• Executing programs to machine the large, heavy aero engine components according to the engineering drawing of Rolls-Royce Engine Manuals

• Setting up, operating, and maintaining of CNC VTL

• Monitoring the machining process to ensure quality

• Troubleshooting any issues that arise

• Familiar in using different precision measuring instruments for dimensional inspection

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Fixture & Tooling storage & Cutting tools storage)

Requirements:

• Minimum 3 years relevant working experience in programming and operation of CNC VTL

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Able to compose CNC programs on Faunc, Siemens, Heidenhain or other systems for machining operation

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

Job Responsibilities:

• Ability to apply protective or functional metal coatings and ceramic materials to aero engine components using thermal spray processes in accordance with the requirements & instructions of Rolls-Royce Engine Manuals

• Carry out masking and dry abrasive blasting for the preparation of metal spray on the aero engine components according to the engineering drawing of Rolls-Royce Engine Manuals

• Setting up, operating, and conducting routine machine maintenance of Metal Spray Machine

• Monitoring the spraying process to ensure quality

• Performing quality inspections to ensure the coating meets specifications for thickness, density, and other performance criteria

• Troubleshooting any issues that arise

• Familiar in using different precision measuring instruments for dimensional inspection

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Fixture & Tooling storage)

Requirements:

• Minimum 3 years relevant working experience in operation of Metal Spray Machine

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Ability to interpret engineering drawings and specifications.

• Proficiency with specialized machinery for thermal spray applications.

• Knowledge of different thermal spray processes (e.g., plasma, flame, arc).

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

Job Responsibilities:

• Ability to carry out repair and modification on aero engine in accordance with the requirements & instructions of Rolls-Royce Engine Manuals

• Preparing CNC program and conducting first article inspections to ensure quality

• Executing programs to machine the aero engine components according to the engineering drawing

• Setting up, operating, and conducting routine machine maintenance of CNC EDM Machine

• Monitoring the machining process to ensure quality

• Performing quality inspections of finished products

• Troubleshooting any issues that arise

• Familiar in using different precision measuring instruments for dimensional inspection

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Fixture & Tooling storage & Electrodes storage)

Requirements:

• Minimum 3 years relevant working experience in programming and operation of CNC EDM Machine

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Able to compose CNC programs on Faunc, Siemens, Heidenhain or other systems for machining operation

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

✈️ Take Flight in Your Career with a Leading Aerospace MNC! ✈️

With its state-of-the-art expanded facilities and continuously developing capabilities in both engine overhaul and component repair businesses, our client is embarking on the next phase of its multi-million-dollar expansion plan in Singapore.

We are inviting passionate and motivated individuals to join as Trainee Technicians — and take off together toward a rewarding career in aerospace!

Why Join Us:

• Up to $4,400 monthly

• $250 shift allowance

• 9% salary increment after 4 months

• Variable bonus (up to 4 months)

• 13th Month AWS included

• No experience required – Full training provided

• Sponsored higher education & career progression

• Door-to-door transport (Islandwide)

• Air-conditioned working environment

• Medical & dental benefits (Dental up to $1,200)

• Financially stable & steadily growing MNC
  

Work Schedule

• 5-day work week

• 8-hour shifts (Morning & Afternoon only)
  

The Role

• Perform preventive maintenance on aircraft systems, including structural, electrical, and electronic components

• Fabricate and carry out minor repairs on airframe sheet metal, electrical wiring, and subsystem assemblies

• Conduct operational and functional checks using appropriate test equipment to verify serviceability and airworthiness

• Ensure all work is performed in compliance with national aviation regulations, company procedures, and safety standards
  

Please submit your updated resume in MS Word format by clicking the QUICK APPLY button.

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Chan Yue Yi
Registration Number: R23112442
AlwaysHired Pte Ltd
EA Licence No: 24C2293