Total 4,705 Engineering job vacancies

Key Duties

·       Lead on-site installation and deployment of Battery Energy Storage Systems (BESS)
·       Commission BESS, perform testing, and ensure successful system integration
·       Install and configure electrical distribution boards and connect systems to diesel generators
·       Perform electrical testing using multimeters, insulation testers, clamp meters
·       Interpret electrical schematics and single-line diagrams
·       Troubleshoot system faults and conduct root cause analysis
·       Monitor system performance and perform data-driven diagnostics
·       Ensure compliance with electrical codes, IEC / UL standards, and safety regulations
·       Coordinate with contractors, clients, and internal engineering teams
·       Prepare technical documentation, commissioning reports, and system records
·       Provide basic system training to clients and partners
·       Support hybrid systems (BESS + diesel generator) integration projects
·       Collaborate with product development teams to improve system performance

Requirements

·       Diploma or Degree in Electrical Engineering or equivalent
·       3 - 5 years of experience in Power Generator Field

Hands-on experience in:
- Electrical Installation and Commissioning
- Energy Storage Systems (BESS), Solar, or Generator Systems
- High-Voltage Systems and Power Electronics

Strong knowledge of:
- Diesel generators
- Electrical distribution systems
- Inverters and power electronics
- Energy storage safety practices

·       Ability to read and interpret electrical drawings and single-line diagrams
·       Experience with electrical testing equipment
·       Strong troubleshooting and analytical skills
·       Independent, hands-on, and field-oriented
·       Willing to travel regionally

Good to Have

·       Experience in hybrid power systems (BESS + diesel genset)
·       Familiarity with SCADA or remote monitoring systems
·       Knowledge of grid interconnection requirements
·       Valid electrician license or relevant certifications

Apply Now: jeffrey@oaktree.com.sg
Contact Person: Jeffrey Chua Kay Hwee
EA License No: 06C4642
EA Reg No: R1110624

• Career exposure to Hybrid Power Systems and Battery Energy Storage Systems (BESS)
• Leadership and career progression opportunities
• Structured technical environment with cross-functional collaboration

Key Duties

• Conduct testing, troubleshooting, validation, and commissioning of generators, BESS, and distribution boards
• Support servicing, maintenance, and site works for power generation and electrical systems
• Ensure compliance with safety regulations and technical standards
• Provide technical input for product trials, system improvements, and component evaluations
• Propose enhancements based on field performance and operational feedback
• Guide and mentor junior engineers and technicians
• Work closely with sales, operations, and service teams to deliver project solutions
• Support technical discussions with customers and liaise with vendors on technical matters

Requirements

• Diploma or Degree in Electrical Engineering, Mechanical Engineering, or Power Engineering
• 3 - 5 years of experience in Power Generation, Electrical Distribution, BESS, or related industries (Power Generator Field)
• Strong technical knowledge of generators, energy storage systems, and power distribution equipment
• Experience in field servicing, commissioning, and project delivery preferred
• Ability to lead small project teams and supervise junior staff
• Strong troubleshooting, analytical, and problem-solving skills
• Hands-on approach with good communication skills

Apply Now: jeffrey@oaktree.com.sg
Contact Person: Jeffrey Chua Kay Hwee
EA License No: 06C4642
EA Reg No: R1110624

Responsibilities

• Design, develop, and maintain low-code/no-code solutions using Microsoft Power Platform, including Power Apps and Power Automate.
• Build, configure, and manage SharePoint sites, lists, libraries, forms, and collaboration solutions.
• Develop workflow automation and business process solutions to improve operational efficiency and support digital transformation initiatives.
• Create user-friendly applications and automated workflows based on business requirements.
• Integrate Power Platform and SharePoint solutions with internal and external systems through APIs, connectors, and data gateways.
• Work with Dataverse, SQL databases, and Microsoft 365 services to support enterprise business processes.
• Design solutions that align with security, governance, and compliance requirements.
• Support the full application lifecycle, including development, deployment, enhancements, troubleshooting, and production support.
• Monitor and optimize application performance, usability, maintainability, and scalability.
• Apply best practices for solution architecture, reusable components, security, governance, and application lifecycle management (ALM).
• Maintain technical documentation and support knowledge transfer activities for end users and support teams.
• Collaborate with business users, project teams, and stakeholders to gather requirements and translate them into technical solutions.
• Provide recommendations on Power Platform, SharePoint, and Microsoft 365 capabilities and best practices.
• Support user acceptance testing (UAT), solution rollout, and post-implementation activities.

Requirements

• Bachelor's Degree in Computer Science, Information Technology, Software Engineering, or a related discipline.
• Minimum 5 years of hands-on experience delivering solutions using Microsoft Power Platform and/or SharePoint.
• Proven experience implementing enterprise workflow automation, process improvement, and collaboration solutions.
• Experience integrating Power Platform and SharePoint solutions with external systems.
• Strong SQL knowledge, including database structures, querying, reporting, and integration.
• Knowledge of Microsoft 365 security, governance, permissions, and compliance controls.
• Experience designing and implementing end-to-end workflow automation and business process solutions.
• Familiarity with environment management, solution packaging, deployment pipelines, and application lifecycle management (ALM).
• Experience troubleshooting, debugging, optimizing, and supporting Power Platform applications in production environments.
• Strong analytical and problem-solving skills.
• Ability to translate business requirements into practical and scalable technical solutions.
• Excellent communication and stakeholder management skills, with the ability to engage both technical and non-technical audiences.
• Strong documentation, knowledge-sharing, and collaboration skills.
• Microsoft Power Platform certifications (e.g., Power Platform Functional Consultant, Power Platform Developer Associate) will be an advantage.
• Experience with Azure services, cloud integrations, DevOps practices, and Power Platform ALM will be an advantage.
• Experience supporting digital transformation, automation, or modernization initiatives will be an advantage.

Strong hands-on experience with:

• Power Apps
• Power Automate
• SharePoint Online and/or SharePoint Server

Strong understanding of:

• SharePoint sites, lists, libraries, permissions, and content management
• Microsoft Dataverse
• Microsoft 365 ecosystem
• Connectors, APIs, and integrations

Responsibilities:

• Improve and sustain processes to meet operational goals
• Monitor and control process performance indices
• Ensure quality targets at all critical nodes
• Use quality tools to enhance processes
• Resolve out-of-control issues and determine lot disposition for out-of-spec cases
• Troubleshoot process issues, establish CAS and specs and collaborate on recipe creation
• Oversee SPSR, MRB, TECN status and follow-ups
• Partner with equipment and manufacturing engineers to achieve module goals
• Work with internal/external customers to boost yield and quality
• Drive productivity via process changes, capability documentation, and equipment optimization
• Characterize and develop new equipment processes
• Organize training to upskill AEs/Technicians

Requirements:

• Master or Degree in Electrical, Electronics, Mechanical, Chemical Engineering or Honors in Physics/Chemistry
• 4–8 years of working experience related to Section Head role, preferably in a manufacturing environment
• Technical understanding of manufacturing processes, equipment, and automation systems
• Strong interpersonal, teamwork and analytical skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to engg1@talenttradersg.com

EA License No: 13C6305

Reg. No.: R24121656 (CHEN JING WEI)

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Study and evaluate new method and materials to improve current process and manufacturing capability.
• Conduct DOE to determine the key process parameters and product characteristic.
• Assist production in setting up machine operation procedure and safety guidelines.
• Implement new process.
• Explore possibility of reducing material standard usage or cheaper source.
• Determine the root cause for sample rejection for process related issue.
• Adhoc duties as assigned.

Requirements:

• Degree in Mechanical/Electrical/Electronics/Materials Engineering or equivalent.
• Diploma with 2 to 3 years working experience.
• Good trouble shooting and analytical skills.
• Independent, creative, resourceful and able to take pressure.
• Good communication, report writing and presentation skills.
• Williing to commit 12 hours shift work is a plus.

12 hours shift work (Day or Night shift)

Loyang Area

Manufacturing Industry

Interested Applicants, kindly email your detailed resume via email to hr@tempserv.com.sg

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Job Description & Requirements

• Moves raw material and process solvents received by Production Warehouse personnel

• Loads production equipment and conducts activities aimed to put instruments, services and plant in the right conditions

• Documents all the activities executed

• Housekeeping duities of the lab and operations of the department areas

• Any other general administrative duties/ad-hoc projects as assigned by immediate supervisor

Requirements:

• Degree in Chemical Engineering or Chemical Technology

• API unit operations knowledge (e.g. raw material charging, phase separation, distillation, centrifugation, drying, pack-off)

• Comfortable to do a shift work

• Able to start immediate or within short notice

Interested applicants, please email your updated CV to cindywong@recruitexpress.com.sg

We regret to inform that only shortlisted candidates will be contacted.

EA Personnel No: R2095121
EA Personnel Name: Cindy Wong XInyi

Company Registration Number: Recruit Express Pte Ltd (99C4599)

Windows on Arm Validation technician

We are seeking a highly skilled and motivated Technician to join our team. The successful candidate will be responsible for performing computer hardware and software maintenance, troubleshooting, testing and reporting. The ideal candidate will have excellent analytical and problem-solving skills, with a strong background in computer hardware and software.

This position has a 24 months contract term, and will be annually reviewed.

Years of experience needed –

4-5 years

Roles and Responsibilities:

• Support WOA Validation Engineering team for testing and validation
• Perform basic computer setup and maintenance, including computer disassembly and assembly, WOA installation and driver installation/upgrade, BIOS flash/upgrade
• Run testing and perform issue troubleshooting and reporting
• Conduct reported issue reproduction and validation, collect and analyse test logs, generic triage & debug
• Complete all test requests on time and communicate revised schedules as necessary
• Utilize software tools such as bug tracking tools, databases, and others as required
• Submit bugs into tracking tools and accurately classify severity levels
• Perform ad-hoc testing on new software and firmware components and assist in developing test plans
• Understand/modify/develop and execute simple scripts using Python or other programming languages
• Provide periodic updates and feedback testing status or improvements proposal to test plans
• Work on multiple projects or tasks and complete them on schedule

Education and Experience

• Bachelor's degree in Computer science/engineering degree or equivalent
• Knowledge and Skills
• Attitude to take initiative, learn, and grow
• Ability to work independently with minimal instructions
• Excellent analytical and problem-solving skills
• Excellent written and verbal communication skills
• Strong collaboration and communication skills
• Knowledge of PC hardware and software
• Knowledge of Windows OS and driver installation, bios upgrade, testing and troubleshooting
• Knowledge of WOA
• Fluent in Mandarin

Duties to be Performed:

Senior Mechanical Engineer – Fire Protection Systems will be responsible for designing and delivering mechanical systems for industrial properties in the semiconductor, electronics, biopharma, and related industries.

The Duties/ Responsibilities of the Prospective Candidate are,

• Responsible for Concept, Basic, and Detailed Design of Mechanical Fire Protection Systems, including Fire Sprinkler, Fire Hydrant, Fire Hose Reel in accordance with local and international codes.

• Engineering design of Fire Protection and Detection Systems for new and existing industrial and commercial buildings, ensuring life safety and property protection.

• Conduct feasibility studies and conceptual designs of Fire Protection Systems, evaluating system types (wet, dry, pre-action, deluge) and suppression strategies based on fire risk assessments.

• Review of Fire Protection systems in preparation for testing, commissioning, and validation, ensuring systems function per design intent and performance criteria.

• Provide engineering services for tendering, including preparing technical specifications, BOQ, SOW, conducting site show rounds, and briefing bidders on fire protection packages.

• Develop detailed project plans for Fire Protection scope, including tracking of design milestones, procurement schedules, installation, testing, and commissioning activities.

• Create and maintain comprehensive project documentation, including Fire Protection Calculations, Hydraulic Calculations, Material Submittals, and As-Built Drawings.

• Liaise with clients to understand project-specific fire safety goals and regulatory requirements, and clarify detailed briefs for each fire protection system design.

• Clearly define and align inter-discipline technical interfaces (Mechanical, Electrical, Civil, Architectural) and scope demarcation for fire protection systems.

• Work with CAD Drafters and BIM Modelers to guide system modeling, verify routing of pipes and equipment locations, and conduct field verification to ensure installation compliance.

• Perform Friction Loss Calculations for piping networks, determine pump head requirements, and estimate Power Requirements for fire pumps and associated equipment.

• Conduct Fire Risk Assessments and Smoke Control Calculations, and perform system design analyses for compliance with local codes and international standards

• Promote safe working practices, ensuring all fire protection systems are designed and installed to protect the health and safety of employees, contractors, and clients.

• Liaise closely with QA/QC Engineers to ensure inspections, testing and system commissioning are aligned with approved fire protection specifications and quality standards.

Job / Skills Requirement:

You should have a bachelor's degree in mechanical.

You should have sound experience in mechanical systems in designing and installation works related to semiconductors, biopharma, laboratories, data centres, or process buildings.

You should be familiar with Singapore’s latest codes, standards, guidelines, regulations, and authorities’ requirements. Your familiarity with available equipment, modern technology, construction methods, and CAD/ BIM is an added advantage.

You should be able to advise clients and engineers on project execution, supervising progress, and quality of work.

Willing to travel/ relocate.

A1 MAIN CONTRACTOR, well established construction company, seeking an experienced Civil & Structural professional to support planning, coordination, and technical delivery of building projects.

Candidates at Senior Engineer, Assistant Manager, or Manager level are welcome, depending on experience and capability.

Overview

This role will be responsible for planning, technical coordination, and structural engineering support for Civil & Structural works. The successful candidate will work closely with project, design, and site teams to ensure constructability, resolve technical issues, and support timely project delivery.

• Support planning and coordination of Civil & Structural works for building projects

• Prepare and review concrete body plans, construction sequencing, and methodologies

• Carry out basic structural design calculations and checks for RC and steel structures

• Review C&S drawings and identify design, coordination, and constructability issues

• Raise and manage RFIs, technical queries, and alternative proposals to resolve site issues

• Coordinate with structural consultants, subcontractors, and internal teams on technical matters

• Provide technical support for structural steel works, including sequencing and interfaces

• Assist in monitoring progress and resolving technical constraints affecting schedule

• Participate in coordination meetings and contribute technical input to the project team

• For Assistant Manager / Manager level:

  • Provide guidance to junior engineers

  • Support the Project Manager in technical planning and decision-making

Requirements

• Degree in Civil / Structural Engineering or related discipline

• 5 years of relevant experience in Civil & Structural works for building projects
  (More experienced candidates may be considered at Manager level)

• Able to prepare concrete body plans and perform basic structural design checks

• Familiar with reinforced concrete construction and site coordination
  

  How to Apply Click Apply now or send your resume directly to Talent@BuildBridgePartners.com
  

  
  
  

  
  
  

  EA Name: BuildBridge Partners Pte Ltd

  EA License No: 25C2918

  EA Reg No: R1551092 Khoo Yan Jie

Company Overview

Greensafe International Pte Ltd is a consulting, training, auditing, and outsourcing firm providing Workplace Safety & Health, Environmental, and Quality services to diverse industries and workplaces.

Job Summary

The Resident Engineer (Civil & Structural) will lead site supervision, quality assurance, and coordination of civil and structural works on Jurong Island, ensuring compliance, resolving technical issues, and reporting progress to support successful project delivery.

Responsibilities

• Assist QP(S) by coordinating and supervising daily civil and structural site works, including building works and site investigations
• Lead and monitor Registered Technical Officers (RTOs) on site to ensure adherence to project standards
• Conduct consistent quality assurance inspections and testing to verify compliance with specifications
• Attend site meetings and resolve technical issues collaboratively with contractors to maintain project progress
• Maintain accurate quality records and monitor work progress for timely reporting
• Review and provide detailed comments on contractor submissions to ensure technical accuracy
• Verify and approve contractor reports, variations, progress claims, and as-built quantities for variations
• Prepare and submit comprehensive daily, weekly, and monthly site progress reports to stakeholders
• Perform additional duties related to project requirements as assigned by the Engineer
• Execute other Resident Engineer (Civil & Structural) scope-related tasks as industry standards dictate

Required competencies and certifications

• Bachelor’s Degree, Post Graduate Diploma, or Professional Degree in Civil or Structural Engineering or equivalent
• Registration as Resident Engineer (C&S) with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• Minimum 6 years of experience as a Resident Engineer in civil and structural works for building projects

Preferred competencies and qualifications

• Familiarity with steel structure and piling inspection, piling load tests, and excavation works
• Strong problem-solving skills demonstrated by making quick, informed decisions in site management
• Ability to work independently and collaboratively within a team environment
• Effective interpersonal, written, and verbal communication skills

Other Information

• Work Location: Jurong Island

1. Installation, maintenance and servicing of a wide variety of equipment including but not limited to:

• General security systems
• Alarm systems
• CCTV systems
• Access control systems

2. Troubleshoot problems encountered on site

3. Diagnose and resolve issues related to network connectivity, server performance, and communication between security systems (e.g., CCTV, alarm systems, access control systems).

4. Provide feedback to management on issues faced on the ground

5. Perform routine maintenance and firmware updates on servers, network devices, and security system software to ensure systems remain reliable and up-to-date

Job Requirements

• Candidate must possess at least a NITEC or Diploma in Engineering (Electrical/ Electronic/ Information Technology) or equivalent
• Minimum 2 years’ experience in Operational Technology/ Information Technology industry
• Knowledge of networking and IP/TCP protocol
• In-depth knowledge in CCTV, Access Control and System Server etc.
• Hands-on experience in security-related tasks such as OS tightening, patching and updating, virus scanning will be an added advantage.
• IT Certification in windows system & storage, network, database, virtualization, cloud technologies will be an added advantage
• Good communication skills and positive working attitude.
• Candidate must possess a Class 3 or 3A driving licence

Benefits

• Annual Wage Supplement (13th month) and Performance Bonus
• Medical and Dental Benefits
• Corporate Insurance coverage
• Annual Pay Increment

Clarice Lim (R1656152) | Anchor Search Group Pte Ltd (17C8528)

Job Overview

We are seeking an experienced MES Engineer to manage and enhance manufacturing execution systems supporting production operations. This role plays a key part in ensuring system stability, process optimization, and continuous improvement across CIM applications.

Key Responsibilities

• Support, monitor, and maintain MES applications covering production workflows and operations
• Design, develop, and enhance CIM-related systems and applications
• Provide Level 2 and Level 3 support for production-critical environments
• Partner with internal IT and operations teams to improve system performance and uptime
• Gather requirements and implement system enhancements and new features
• Maintain technical documentation and support deployment activities
• Conduct training sessions and support system users
• Drive initiatives to improve productivity, reduce errors, and optimize processes

Requirements

• Degree in Computer Science, Engineering, or related discipline
• Experience working with MES or CIM systems in manufacturing environments
• Knowledge of Oracle SQL
• Familiarity with SECS/GEM standards and TIBCO (TIB/RV) is preferred
• Exposure to high-tech or semiconductor manufacturing environments is advantageous
• Strong analytical, communication, and stakeholder engagement skills

Please send your detailed resume in MS Word format to resume@goldtecHRs.com with

• Education Level
• Working experiences
• Each employment background
• Reason for leaving each employment
• Last drawn salary
• Expected salary
• Date of availability

Job Responsibilities:

• Lead production operations in a battery recycling plant

• Plan and manage production schedules, manpower allocation, and output targets

• Monitor productivity, quality, safety, and operational performance

• Conduct performance reviews and manage team discipline, attendance, and training

• Support process troubleshooting and resolve production-related issues

• Drive continuous improvement (CIP) initiatives and support engineering investigations and corrective actions

• Ensure operators are trained and follow work instructions

• Monitor raw material usage, availability, and manage shortages

• Track machine performance, uptime, and coordinate basic maintenance activities

• Ensure compliance with 5S, housekeeping, and safety standards on the production floor

• Coordinate with maintenance team for TPM and equipment reliability improvements

• Maintain production records, skills matrix, and capacity planning data

• Prepare and present monthly production KPIs and reports to management

Job Requirements:

• Degree in Chemical Engineering or related Engineering discipline

• Experience in manufacturing, preferably chemical or process industry

• Strong knowledge of production operations, manpower planning, and capacity planning

• Experience in process troubleshooting and production execution

• Strong leadership, teamwork, and communication skills

• Willingness to learn and work in a fast-paced manufacturing environment
  

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format or please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd      

EA License No: 19C9950

EA Personnel: Lee Jun Siong (Johnson)

EA Personnel Reg No: R24120242

Duties and Responsibilities

1. Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.

2. Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.

3. Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.

4. Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.

5. Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.

6. Ensure spares, tools and equipment used are in good condition and calibrated if necessary.

7. Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.

8. Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System

9. Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.

10. Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.

11. Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.

12. To support the group during incidents, accidents and emergencies.

13. Ensure excellent housekeeping are maintained within all work areas.

14. Maintain a high level of work discipline and standards.

15. Perform any other task as assigned.

About the Role

We are looking for a detail-oriented Planning Engineer to support project scheduling, progress monitoring, and on-site coordination. You will assist in translating design plans into executable schedules, track site progress, identify risks or delays, and help ensure the project is delivered safely, on time, and according to quality standards. This is a 1-year contract role, renewable based on performance and project needs.

Key Responsibilities

• Assist in developing and updating project schedules.
• Break down master schedules into monthly, weekly, and daily work plans.
• Monitor site execution progress and report deviations.
• Coordinate with construction, design, procurement, and subcontractors to ensure schedule alignment.
• Support resource planning for manpower, equipment, and materials.
• Highlight risks, delays, and propose mitigation measures.
• Assist in preparing daily, weekly, and monthly progress reports.
• Maintain project documentation and ensure data accuracy.

Qualifications & Skills

• Bachelor’s degree in Civil Engineering or related field.
• Min 1 years work experience in geotechnical, ground improvement, reclamation or construction planning preferred.
• Familiarity with project management tools and data analysis.
• Strong analytical, coordination, and communication skills.
• Ability to work in site conditions and manage multiple tasks.
• Ability to work flexible shifts (day or night) based on project requirements.
• Detail-oriented with good problem-solving ability.

Woodlands

Mon to Fri 8.30am to 5.30pm

Salary up $3800-$5500

Have AWS & bonus

Job Description

• To support study and analyze customer design requirement, specifications, and other data to evaluate the feasibility, cost, and tooling/equipment requirements.
• To support performing product validation according to the product design specification and customer requirements.
• To support generating drawing (3D/2D) for new and existing parts which require changes
• Main focal point for FAI build in new product introduction.
• Support in reviewing and Implement new router released from Engineering Dept.
• Leads projects for process and cycle time improvement.
• Update Production Router as per improvement.
• Identify, investigate, troubleshoot and resolve shortcoming in processes.
• Update relevant Work Instructions and Operating procedures for process improvements.
• To co-ordinate Engineer Change Order with production, planning and purchasing team to ensure smooth implementation.
• Support QA for failure analysis (RMA) and identification of corrective action for customer returns and internal CAR’s.
• Support QA team during customer/internal audits.

Requirement

• Bachelor’s degree / Post Graduate Diploma in Industrial / Mechanical / Mechatronic / Electromechanical Engineering or equivalent
• At least 3 years relevant working experience
• Able to understand mechanical drawing
• Proficient in using Solidworks

Only shortlisted candidates will be notified

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at emily.fong@atomrecruit.com

--
Warmest Regards,
Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443 | www.atomrecruit.com
DID: 6524 2916 | M: 8699 8852 / 8838 5979
EA Personnel Reg No.: R1768368
60 Paya Lebar Road, #07-54 Paya Lebar Square, Singapore 409051

Woodlands

Mon to Fri 8.30am to 5.30pm

Salary up $3800-$5000

Have AWS & bonus

Job Description

• To support study and analyze customer design requirement, specifications, and other data to evaluate the feasibility, cost, and tooling/equipment requirements.
• To support performing product validation according to the product design specification and customer requirements.
• To support generating drawing (3D/2D) for new and existing parts which require changes
• Main focal point for FAI build in new product introduction.
• Support in reviewing and Implement new router released from Engineering Dept.
• Leads projects for process and cycle time improvement.
• Update Production Router as per improvement.
• Identify, investigate, troubleshoot and resolve shortcoming in processes.
• Update relevant Work Instructions and Operating procedures for process improvements.
• To co-ordinate Engineer Change Order with production, planning and purchasing team to ensure smooth implementation.
• Support QA for failure analysis (RMA) and identification of corrective action for customer returns and internal CAR’s.
• Support QA team during customer/internal audits.

Requirement

• Bachelor’s degree / Post Graduate Diploma in Industrial / Mechanical / Mechatronic / Electromechanical Engineering or equivalent
• At least 3 years relevant working experience
• Able to understand mechanical drawing
• Proficient in using Solidworks

Only shortlisted candidates will be notified

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at emily.fong@atomrecruit.com

--
Warmest Regards,
Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443 | www.atomrecruit.com
DID: 6524 2916 | M: 8699 8852 / 8838 5979
EA Personnel Reg No.: R1768368
60 Paya Lebar Road, #07-54 Paya Lebar Square, Singapore 409051

About the Role

We are looking for a detail-oriented Planning Engineer to support project scheduling, progress monitoring, and on-site coordination. You will assist in translating design plans into executable schedules, track site progress, identify risks or delays, and help ensure the project is delivered safely, on time, and according to quality standards. This is a 1-year contract role, renewable based on performance and project needs.

Key Responsibilities

• Assist in developing and updating project schedules.
• Break down master schedules into monthly, weekly, and daily work plans.
• Monitor site execution progress and report deviations.
• Coordinate with construction, design, procurement, and subcontractors to ensure schedule alignment.
• Support resource planning for manpower, equipment, and materials.
• Highlight risks, delays, and propose mitigation measures.
• Assist in preparing daily, weekly, and monthly progress reports.
• Maintain project documentation and ensure data accuracy.

Qualifications & Skills

• Bachelor’s degree in Civil Engineering or related field.
• Min 1 years work experience in geotechnical, ground improvement, reclamation or construction planning preferred.
• Familiarity with project management tools and data analysis.
• Strong analytical, coordination, and communication skills.
• Ability to work in site conditions and manage multiple tasks.
• Ability to work flexible shifts (day or night) based on project requirements.
• Detail-oriented with good problem-solving ability.

Position Overview

We are seeking a detail-oriented Senior Engineer, Mechanical (Drafting Focus) to produce accurate, high-quality 2D and 3D technical drawings that clearly reflect engineering intent. This role is dedicated to drafting, documentation, and drawing management to support manufacturing, fabrication, and assembly activities.

Main Responsibilities

• Create and maintain accurate 2D drawings and 3D models using CAD software such as SolidWorks, AutoCAD, or Inventor.
• Translate engineering concepts, sketches, and design inputs into complete, manufacturable drawings.
• Apply proper dimensioning, GD&T, materials, surface finishes, and technical notes in accordance with ASME/ISO standards.
• Revise and update drawings based on design changes, engineering feedback, and project requirements.
• Ensure all drawings comply with company drafting standards, engineering codes, and documentation procedures.
• Manage drawing files, revisions, and version control using PDM/PLM systems.
• Collaborate with engineering, manufacturing, quality, and suppliers to resolve drawing-related issues and support manufacturability.

Requirements

• Degree in Mechanical Engineering or a related field (or equivalent relevant technical experience).
• 5+ years of expertise in designing small components, demonstrating strong attention to detail and engineering excellence
• Strong proficiency in CAD software with solid knowledge of GD&T, drafting standards (ASME Y14.5), and manufacturing processes.
• Ability to interpret engineering requirements and convert them into complete drawings.
• Knowledge of machining, sheet metal, welding, and fabrication drawings.
• Familiarity with optoelectronic components.

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met.
• Attending site coordinate meetings with main-con, consultants and other contractors.
• Hands-on and technical assistance for Electrical / ELV system installation and troubleshooting on site.
• Prepare material requisition for all Electrical / ELV equipment and materials.
• Prepare work programme for Electrical ELV Works with material delivery and installation activities in accordance with the project programme.
• Analyse, manage and track project costs against budget.
• Carry out testing and commissioning, combined services testing for TOP/CSC,  
• Handover of completed work activities with as built drawings and O&M to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Coordination with other trade of contractors such as Mechanical System, Process System, Structural etc.
• Participate in in-house engineering design works of Electrical system, including detailed design, load calculation, voltage drop calculation, cable sizing, cable routing, shop drawings, equipment selection, etc.
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines.
• Participate in liaison with Electrical / ELV suppliers for quotation, carry out equipment selection, technical and commercial evaluation.
• Prepare material submittals for electrical system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all electrical equipment and materials.
• Participate in tender preparation for new projects.

Requirements

• Min Diploma Degree in Electrical Engineering.
• Min 8 years of relevant working experience in building construction industry, preferable in handling Building Service Electrical / ELV works.
• Proficient in AutoCAD and Revit.
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively.
• Experienced and possessed relevant knowledge in Electrical / ELV calculations is an advantage.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• BCA/SCDF/PUB authority certification is an advantage

Key Responsibilities

Product Design & Development

• Lead the mechanical design and development of new products and product enhancements.
• Create innovative concepts and translate them into detailed mechanical designs.
• Develop modular hardware architectures and reusable design solutions.
• Design complex mechanical systems, assemblies, and mechanisms while balancing performance, cost, manufacturability, and reliability.
• Convert product and customer requirements into practical engineering solutions.

Engineering Analysis & Validation

• Perform engineering calculations and technical analyses on components and assemblies.
• Identify technical risks early and develop effective mitigation plans.
• Develop and execute testing strategies, validation plans, and prototype evaluations to verify design performance.
• Ensure quality and reliability considerations are incorporated throughout the design process.

Project Execution

• Manage mechanical development schedules and deliverables for assigned projects.
• Support project planning activities and ensure designs are delivered on time and within budget.
• Collaborate with stakeholders to define product specifications and technical requirements.
• Drive continuous improvement initiatives and contribute to value engineering efforts.

Manufacturing & Production Support

• Work closely with manufacturing teams to support product industrialization and production readiness.
• Provide expertise in manufacturing processes including injection molding, machining, sheet metal fabrication, assembly, and related production methods.
• Troubleshoot manufacturing and product performance issues and implement design improvements when required.

Cross-Functional Collaboration

• Partner with Electrical, Firmware, Software, Manufacturing, Quality, and Product teams throughout the product development cycle.
• Participate in design reviews and contribute to multidisciplinary problem-solving efforts.
• Mentor and provide technical guidance to junior engineers where appropriate.

Requirements

Education & Experience

• Bachelor's degree in Mechanical Engineering or a related discipline.
• 8+ years of experience in mechanical product design and development.
• Proven experience taking products from concept and prototype stages through to mass production.

Technical Expertise

• Strong understanding of mechanical engineering principles and product development methodologies.
• Experience designing complex mechanisms such as:Gear trainsClutchesCamsLinkagesMotion-control systems
• Knowledge of electro-mechanical systems, including:MotorsSensorsPower transmission components
• Hands-on experience designing:Plastic componentsSheet metal partsDie-cast componentsRubber componentsMechanical assembliesElectro-mechanical assemblies
• Proficiency with SolidWorks and/or other 3D CAD tools.
• Familiarity with simulation and analysis tools (FEA preferred).
• Strong understanding of GD&T (Geometric Dimensioning & Tolerancing).

Preferred Qualifications

• Knowledge of Design of Experiments (DOE) and Six Sigma methodologies.
• Experience with:DFMEA (Design Failure Mode & Effects Analysis)Design for Manufacturing (DFM)Design for Assembly (DFA)Structured product evaluation and decision-making methodologies

Responsibilities

• Responsible for set-up and optimization of new device qualification, engineering lot processing, process data gathering and reporting
• Monitor and improve device yield performance and process SPC charts
• Investigate and troubleshoot production downtime and quality issues to provide lot disposition on outlier lots
• Perform engineering report and documentation such as 8D, DMAIC, FMEA, CP, Process Specification, Work Instructions, etc
• Implement continuous improvement program (CIP) to support yield and cost improvement, including developing systems for workflow management
• Facilitate training of manufacturing personnel on operating procedures and process specification
• Work closely with inter-department to improve process and equipment performance and capability
• Coordinate and communicate with customers for any process engineering related matters
• Setup systems and NPI requirements, handles qualifications and engineering activities

Requirements

• Diploma / Degree in any Engineering Discipline
• Working experience in semiconductor assembly manufacturing or process engineering and pre-assembly processes (Backgrind, Laser Marking, Laser Groove, Wafer Dicing) is an advantage
• Knowledge in SPC, DOE, FMEA, OCAP, Control Plan, WI and Process Specification
• Clear and effective communication with customers, suppliers and cross department
• Able to multi-task and support ad-hoc projects in process and equipment related activities
• Entry level candidates are welcome to apply

Structural Engineer (Structural / Steel Design)

Salary: $5000 - $5500
Working Hours: Monday - Friday 9am - 6pm
Location: 41 Senoko Way

Job Summary:
The senior Engineer is responsible for leading the structural engineering function with a primary focus on steel structure design and engineering management. The role involves overseeing structural analysis and design in accordance with Eurocode standards, managing engineering teams, coordinating with fabrication and construction teams, and ensuring that all engineering deliverables meet project specifications, quality requirements, and timelines.

Key Responsibilities:

• Perform and review structural analysis and design of steel structures in accordance with Eurocode and relevant international standards.

• Utilize engineering software such as STAAD for structural analysis and CAD tools for preparation and review of engineering drawings.

• Oversee the preparation, review, and approval of structural calculations, design reports, and fabrication drawings.

• Coordinate closely with steel fabrication teams to ensure design feasibility, manufacturability, and compliance with fabrication requirements.

• Provide technical guidance and mentoring to engineers and draftsmen.

• Manage engineering schedules, deliverables, and resource allocation to meet project timelines.

• Liaise with clients, consultants, and project teams to resolve technical issues and ensure alignment with project requirements.

• Ensure compliance with safety regulations, engineering standards, and company procedures.

• Support tendering and proposal preparation by providing technical inputs and preliminary engineering assessments.

Job Requirements

• Degree in Civil Engineering, Structural Engineering, or a related discipline.

• Minimum 1-2 years of experience in structural engineering with significant exposure to steel structure design.

• Strong knowledge and practical experience in Eurocode design standards.

• Proficient in structural analysis software such as STAAD.

• Skilled in CAD software for engineering drawings and coordination.

• Solid understanding of steel fabrication processes, connection detailing, and constructability considerations.
  

Chan Kai Wen Reg R23114137
THE SUPREME HR ADVISORY PTE LTD
EA No: 14C7279

Senior Automation Engineer

You will be responsible for industrializing and sustaining automation and robotic solutions to improve process repeatability, quality, and productivity across the repair facility. This role provides technical leadership in deploying industrial robots, collaborative robots (cobots), and other automation methods to enable consistent and reliable repair processes. The engineer will collaborate with cross-functional teams to standardize applied methods, drive scalability across processes, and build a sustainment program for long-term reliability of automated systems.

• Salary up to $8000 + AWS & Variable Bonus
• Mon-Fri, 7.30am-5pm
• Flexi Benefits
• Location : West (Transport provided)
  

Roles and Responsibilities

• Define automation architecture, standards, and best practices across PLCs, robotics, motion control, safety, and networking.

• Lead design, programming, and commissioning of industrial and collaborative robots (ABB, Fanuc, UR, KUKA) including integration with vision systems, drives, and HMIs.

• Translate business and process needs into control strategies, functional design specifications, and acceptance criteria.

• Lead automation projects from concept to handover—scope, schedule, budget, risk management, and resource coordination.

• Manage vendors, system integrators, and contractors through FAT/SAT planning, execution, and on-time handover.

• Use offline programming and simulation tools (e.g., ABB RobotStudio, FANUC ROBOGUIDE) for cell design and cycle-time optimization.

• Design, program, and commission Beckhoff TwinCAT 3 systems (IEC 61131-3 ladder, structured text, function block), including motion, EtherCAT I/O, and TwinSAFE.

• Conduct system validation and qualification (IQ/OQ/PQ) and ensure documentation accuracy.

• Implement process control plans, PFMEA, and risk assessments for new automated systems.

• Monitor automation performance using key metrics (OEE, FPY, downtime) and drive root cause analysis and corrective actions.

• Develop sustainment programs for preventive maintenance, software version control, and operator competency.

• Partner with EHS, Quality, Maintenance, and IT to ensure system safety, cybersecurity, and compliance with Life Saving Rules.

• Mentor engineers and technicians in automation and robotics best practices.

• Support continuous improvement and Lean initiatives to enhance flow, safety, and process stability.

Required Qualifications

• Bachelor’s degree in Mechatronics, Controls, Electrical, Mechanical, or Automation Engineering.

• Minimum 5+ years of experience delivering industrial automation and robotics projects from concept to commissioning.

• Proven hands-on experience with industrial robot programming (ABB, Fanuc, UR, or KUKA).

• Strong knowledge of PLCs and control systems, preferably Beckhoff TwinCAT 3 (EtherCAT, motion, TwinSAFE).

• Demonstrated ability to manage automation projects, vendors, and FAT/SAT activities.

• Experience in process industrialization, qualification, and validation (IQ/OQ/PQ).

• Experience integrating vision systems, motion control, and safety interlocks.

• Familiarity with programming languages (Python, C++, or Java) for data interfaces or simulation.

• Knowledge of CAD software (SolidWorks, Siemens NX) for tooling and layout design.

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met.
• Attending site coordinate meetings with main-con, consultants and other contractors.
• Hands-on and technical assistance for Mechanical System installation and troubleshooting onsite.
• Prepare material requisition for all Mechanical equipment and materials.
• Prepare work programme for Mechanical works with material delivery and installation activities in accordance with the project programme.
• Analyse, manage and track project costs against budget.
• Carry out testing and commissioning, combined services testing for TOP/CSC,  
• Handover of completed work activities with as built drawings and O&M to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Coordination with other trade of contractors such as Electrical System, Process System, Structural etc.
• Participate in in-house engineering design works of Mechanical system, including detailed design, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines.
• Participate in liaison with Mechanical System’s suppliers for quotation, carry out equipment selection, technical and commercial evaluation.
• Prepare material submittals for Mechanical system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all Mechanical System’s equipment and materials.
• Participate in tender preparation for new projects.

Requirements

• Min Diploma Degree in Mechanical Engineering with ACMV / Fire Protection / Plumbing & Sanitary Background
• Min 8 years of relevant working experience in building construction industry, preferable in handling ACMV / Fire Protection / Plumbing & Sanitary works.
• Proficient in AutoCAD and Revit.
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively.
• Experienced and possessed relevant design knowledge in Mechanical System is an advantage.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage