All the responsibilities we will trust you with:

• Installation, maintenance and servicing of a wide variety of equipment including but not limited to:

1. General security systems
2. Alarm systems
3. CCTV systems
4. Access control systems

• Troubleshoot problems encountered on site.
• Diagnose and resolve issues related to network connectivity, server performance, and communication between security systems (e.g., CCTV, alarm systems, access control systems).
• Provide feedback to management on issues faced on the ground.
• Perform routine maintenance and firmware updates on servers, network devices, and security system software to ensure systems remain reliable and up to date.

Your areas of knowledge and expertise that matter most for this role:

• Candidate must possess at least a Professional Certificate/ NiTEC in Engineering (Electrical/Electronic) or equivalent.
• 2 years of working experience in the related field is preferred for this position.
• Candidate must possess a Class 3/Class 3A driving license.

Responsibilities

• Design and implement digital trunked radio systems for MRT/LRT communications, ensuring alignment with project specifications and client expectations.
• Interpret project requirements and translate them into high-performance radio system designs tailored for rail environments.
• Develop and review IT network architectures at radio network system level and BIM-based system drawings to design efficient RF cable routing and comprehensive coverage planning.
• Perform RF engineering analyses, including intermodulation and interference studies, EMC/EMI assessments, cell planning, and RF link budgeting to ensure reliable system performance across both dense urban and rural environment.
• Lead system integration activities, coordinating with other sub-systems, site testing, commissioning, conduct troubleshooting and providing post-deployment warranty support.
• Analyze and interpret complex technical documentation, including schematics, engineering drawings, and design specifications.
• Ensure compliance with all technical and operational project requirements, while securing necessary client approvals.
• Participate in project meetings, handling administrative responsibilities and supporting overall project execution.
• Manage stakeholder engagement, maintaining clear communication with internal teams, clients, suppliers, and overseeing project resources and managing subcontractor activities.
• Implement cybersecurity measures to safeguard radio communication systems against potential threats and vulnerabilities.
• Prepare and deliver technical documentation, design drawings, and presentations using tools such as PowerPoint.
• Troubleshoot and improve system performance by analyzing operational logs, applying system patches, and conducting validation tests

Requirements

• Diploma or Degree in Electronics, Electrical, Telecommunication Engineering, or a related field.
• Good understanding of cybersecurity principles, especially in communication systems.
• Strong multitasking and time management skills, with the ability to perform under pressure and meet tight deadlines.
• Willingness to travel for overseas assignments and adaptable to working hours aligned with railway engineering schedules.
• Proactive and independent, with excellent teamwork and communication skills.
• Proficient in Microsoft Office applications.
• Exposure to radio communication systems from major suppliers is advantageous.
• Familiarity with: Integration protocols for peripheral systems
• Radio network configuration and performance parameters
• RF propagation modeling techniques
• IP addressing schemes and network routing
• IT network infrastructure, including firewalls and LAN switches
• Air interface protocols specific to railway communication environments

Position Overview:

As a Sr. Staff signal integrity engineer, you will be working on challenging SI and PI tasks in globally distributed teams. You will be supporting SI/PI signoff of chip design, package design and PCB design in order to support successful delivery of products of various product lines to market. You will be working with design, test, P&R and application teams globally for modeling of chip high speed I/O and power rails. You will be supporting customers in signing off hardware design or resolving SI/PI issues where system design has constraints. You will also be involved in defining specifications of product electrical performance. You may also be involved in modeling and simulation of EMC issues.

Responsibilities:

Primary (70%):

• Responsible for SI/PI signoff of chip design, package design and PCB design.
• Responsible for modeling high speed I/O and PDN.
• Responsible for customer support for PCB design signoff and issue debug.

Secondary (30%):

• Responsible for product electrical specifications related to high speed I/O.
• Responsible for modeling and simulation of EMC issues.

Requirements:

• 10+ years of working experience in SI/PI
• Deep understanding of electromagnetic theory, transmission line theory and microwave theory
• Familiar with SI/PI design flow, time domain and frequency domain modeling and simulation
• Good comprehension of PLL, equalization, CDR, jitter, noise, IBIS modeling, 8b10b encoding
• Hands on experience with lab equipment such as the high speed oscilloscope, spectrum analyzer and network analyzer
• Skilled with SI/PI simulation tools from ANSYS, Cadence, Keysight and others.
• Skilled in data processing with script in Python, Matlab or other languages.
• Experience in MIPI D-PHY, C-PHY and PAM-4 is a plus.
• Good communication skills and team work.
• MS/PhD

Key Responsibilities

1. Design & Engineering

2. Project Coordination

3. Testing & Commissioning

4. Documentation & Compliance

5. Maintenance & Support

Job Requirements

• Possess Diploma or Degree in engineering or facility management field
• Preferably with 1- 2 years related experience or those without working experience can be considered

• 5 Work Days Per Week
• Current Office Near to Kaki Bukit MRT
• Will Relocate To Tai Seng MRT in August 2026
• Medical & Dental Benefits Provided
• Entitled to Yearly Bonus & Performance Bonus

Current Teams are focusing on AI Agent, Computer Vision, Vision Language Models (VLMs)

Job Responsibilities: 

• Algorithm Development: Development and optimization of machine learning and deep learning algorithms to solve complex business problems. 

• Model Training and Evaluation: Participate in the construction and training of artificial intelligence models, including but not limited to neural networks, decision trees, etc., evaluate and optimize the models to improve their performance and accuracy. 

• Data Analysis and Preprocessing: Conduct data collection, cleaning, preprocessing and feature engineering, provide high-quality data for model training, and arrange and guide data labelers to carry out data labeling and other work. 

• Collaboration and Deployment: Collaborate with team members to integrate algorithm models into actual business systems, promote the implementation of projects, and realize the intelligent upgrading of products. 

• Research and Innovations: Stay up to date with the latest advancements in AI and ML technologies. Explore and deploy new technologies, drive innovations to create value to market needs, and enhance the company’s competitiveness. Audio and video algorithms for surveillance/monitoring applications which also include the research and implementation of algorithms involving target detection, feature extraction, tracking, and recognition. 

• Documentation and Reporting: Maintain comprehensive documentation of algorithms, experiments, and project workflows. Communicate results and findings to technical and non-technical stakeholders. 

Job Requirements: 

1. Bachelor's or Master's Degree in Computer Science, Applied Mathematics, Electrical Engineering, Pattern Recognition, Artificial Intelligence, Automatic Control, Operations Research, Biology, Physics / Quantum Computing, Neuroscience, Statistics or a related field. 

2. Familiar with common machine learning and deep learning algorithms and keeping track with the latest SOTA implementations. 

3. Strong programming skill in Python, C / C++, proficient in mathematical / statistical concepts and exceptional coding skills 

4. Hands-on experience with AI / ML frameworks be familiar such as Caffe, PyTorch, TensorFlow, MxNet etc. 

5. Have rich project experience in machine learning and deep learning, be familiar with common algorithm models, such as CNN, RNN, LSTM, Transformer, ViT, etc., and be able to improve and innovate models according to actual problems. 

6. Experience in familiar the design, parameter tuning and optimization methods of neural network models is a plus 

7. Experience in model compression and in the transplantation and optimization of deep learning forward inference on various platforms, including NPU / GPU / DSP / ARM on mobile platforms and CPU / GPU on server platforms is also a plus. 

8. Strong logical thinking and problem-solving ability, able to independently undertake the research and tackling of complex problems and team spirit are highly valued traits. 
   

   
   Reolink, a leader in intelligent visual technology for homes and businesses, was founded in 2009 by a group of engineers with a strong commitment to and passion for smarter security solutions. 

   Our products are now trusted by millions of users across more than 110 countries and regions worldwide. Building on this trust, we continue expanding our presence and bringing our innovations to more markets around the globe. 

   Reolink remains committed to delivering advanced, reliable, and user‑centric solutions that empower people to protect what matters most. 

Advanced Hardware & Emerging Technology

Our client is an innovative technology company developing next-generation communication and sensing solutions. Due to business expansion and ongoing R&D initiatives, they are looking for a passionate and hands-on Senior Electronics Engineer to join their growing engineering team in Singapore.

This opportunity is ideal for engineers who enjoy solving complex technical challenges, working on advanced hardware platforms, and contributing to cutting-edge product development in a highly collaborative environment.

Key Responsibilities

• Design, develop and test electronic hardware systems and subsystems
• Perform analog and digital circuit design, verification and troubleshooting
• Develop and optimize sensor interface and signal conditioning circuits
• Design and validate PCB layouts, including high-speed and mixed-signal designs
• Collaborate with multidisciplinary engineering teams throughout the product development lifecycle
• Conduct hardware integration, debugging, validation and performance testing
• Prepare technical documentation, test reports and engineering specifications
• Support continuous product improvement and technology development initiatives

Requirements

• Degree or Master's in Electrical Engineering, Electronics Engineering or related discipline
• At least 3 years of relevant electronics design experience
• Strong knowledge of analog and digital circuit design
• Experience with PCB design, testing and troubleshooting
• Familiarity with communication protocols such as SPI, I2C, USB, UART or CAN
• Hands-on experience with laboratory instruments and hardware validation activities
• Strong analytical and problem-solving skills
• Ability to work independently and within multidisciplinary project teams

Preferred Experience

Candidates with experience in any of the following areas will have an advantage:

• High-speed electronics
• Signal processing
• FPGA development
• Sensor technologies
• Optical or photonic systems
• Embedded systems
• Precision instrumentation
• Semiconductor or advanced technology industries
• R&D or product development environments

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

Our client is in construction industry (Grade A1 Contractor), and they are currently seeking for M&E Engineer to be part of the team.

JOB DIMENSION (SCOPE)

• To verify the work done on site is in accordance with the approved drawings / specifications / authorities’ requirement, and to ensure that the subcontractor carry out rectification for non-compliance.
• To resolve site issues with consultants / subcontractor / supplier ASAP in order to minimize delay to the construction progress.
• To attend project / technical meeting and resolve site issues with owner/ consultants in order for the site progress to proceed smoothly.
• To cooperate with the safety department and carry out the assigned duties within the safety framework including permit to work.

REQUIREMENT

• Bachelor Degree in Mechanical/ Electrical Engineering
• More than 3years in M&E services & experience in main-contractor or sub-contractor M&E department

Onion Search Pte Ltd

EA License No: 24C2108

EA Personnel: Clover Lai Kah Wai

EA Personnel No: R24120119

Responsibilities

• Lead the design and development of interactive 3D visualization interfaces using Unity 3D, including real-time digital twin dashboards and OT operational views.

• Architect and implement geospatial rendering systems - integrating map layers, coordinate systems and spatial data into Unity-based frontends.

• Design and deliver seamless integration between Unity frontend components and backend systems, middleware, IoT/OT data pipelines, and REST/WebSocket APIs.

• Collaborate with IoT, OT, and robotics engineering teams to translate telemetry, sensor, and asset data into real-time 3D visualisation.

• Drive technical decisions around rendering performance, level-of-detail (LOD) strategies, shader optimisation, and scene management for large-scale operational environments.

• Build and maintain reusable UI component libraries within Unity, aligned to UX guidelines and design system standards.

• Define and enforce frontend engineering standards, coding conventions, and review practices

• Engage with product owners, systems architects, and client stakeholders to ensure frontend solutions meet functional and non-functional requirements.

• Contribute to CI/CD pipeline integration for build artefacts, automated testing, and deployment workflows.

Requirements

• Bachelor's degree or higher in Computer Science, Software Engineering, Geospatial Science, or equivalent discipline.

• Minimum 5 years of software engineering experience, with at least 3 years focused on Unity 3D development in a production environment.

• Demonstrated delivery of Digital Twin or 3D visualisation solutions for operational, industrial, or smart city domains.

• Understanding of IOT integrations such as OPC-UA, Modbus, MQTT, - Middleware integration and BMS integration

• Understanding of Command and Control (C3) systems.

• Hands-on experience integrating real-time IoT/OT sensor data into interactive 3D or geospatial frontends.

• Track record as a subject matter expert - driving architecture decisions, conducting code reviews, and managing delivery risk.

• Strong understanding of systems engineering principles; able to design frontend components with awareness of full-stack integration constraints.

Licence no: 12C6060

Job Description

• Implement, operate, and optimize microservices on Kubernetes-based cloud platforms.

• Collaborate with Development and DevOps teams to deploy and maintain cloud applications.

• Monitor system performance, conduct load and chaos testing, and ensure platform reliability.

• Build and maintain observability solutions across AWS, Azure, GCP, and OCI environments.

• Develop automation scripts using Python, Go, Bash, or similar scripting languages.

• Support disaster recovery planning, incident response, root cause analysis, and production issue resolution.

• Optimize cloud infrastructure resources, including CPU, memory, auto-scaling, and container performance.

• Define and monitor service KPIs (SLA, SLO, and SLI) while maintaining technical documentation.

• Ensure compliance with security standards and best practices, including ISO 27001, SOC 2, and GDPR.

• Mentor junior engineers, participate in on-call support rotation, and contribute to continuous improvement initiatives.

Job Requirement

• Bachelor's Degree in Computer Science, Information Technology, or a related discipline.

• Minimum 5 years of experience in Site Reliability Engineering (SRE), DevOps, or Cloud Operations.

• Hands-on experience with Kubernetes, microservices, and public cloud platforms (AWS, Azure, GCP, or OCI).

• Proficient in scripting/programming languages such as Python, Go, Bash, Java, or PowerShell.

• Strong knowledge of cloud security, networking, identity & access management, and compliance frameworks.

• Experience with monitoring, observability, incident management, and disaster recovery.

• Strong analytical, troubleshooting, and problem-solving skills.

• Relevant cloud certifications (AWS, Azure, or GCP) will be an added advantage.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Jordan Fung Si Jong

EA Personnel Reg No: R23112945

Our client is a well-established manufacturing MNC specializing in precision engineering and advanced metal component solutions for various industries, including medical, automotive, and industrial applications. Due to their current expansion plans, they are looking for a Metallurgy Engineer to join their engineering team. They are located in the (West) – easily accessible.

Responsibilities:

• Manage engineering and product development projects from initiation through production transfer, ensuring timely completion of project milestones.
• Act as the primary point of contact between customers and internal teams, coordinating project requirements and updates.
• Oversee tooling development activities and collaborate with manufacturing, tooling, and quality departments to support project execution.
• Evaluate component designs and material specifications, providing manufacturability assessments for Metal Injection Molding (MIM) processes.
• Support material selection and development activities, including collaboration with suppliers on metal powders and feedstock formulations.
• Troubleshoot and optimize metallurgical processes such as debinding, sintering, and MIM parameters to achieve product quality requirements.
• Drive continuous improvement initiatives, including process optimization, material qualification, testing methodologies, and productivity enhancements.

Responsibilities:

• Manage engineering and product development projects from initiation through production transfer, ensuring timely completion of project milestones.
• Act as the primary point of contact between customers and internal teams, coordinating project requirements and updates.
• Oversee tooling development activities and collaborate with manufacturing, tooling, and quality departments to support project execution.
• Evaluate component designs and material specifications, providing manufacturability assessments for Metal Injection Molding (MIM) processes.
• Support material selection and development activities, including collaboration with suppliers on metal powders and feedstock formulations.
• Troubleshoot and optimize metallurgical processes such as debinding, sintering, and MIM parameters to achieve product quality requirements.

Drive continuous improvement initiatives, including process optimization, material qualification, testing methodologies, and productivity enhancements.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/CV.

We regret that only shortlisted candidates will be notified.

Email Address: jobs@recruitpedia.sg

EA License No: 19C9682
EA Personnel No: R22104769
EA Personnel Name: Ong Boon Kiet (Travys)

Our esteemed client in the IT industry is seeking a Full Stack Engineer (Python/ Node.js) to join their dynamic team:

• Employment Type: 33-months contract
• Position: Full Stack Engineer
• Location: Central
• Working Hours: Monday to Friday, Office Hours
• Salary Package: Basic + Bonus + Medical Benefits

Job Responsibilities:

• Design, build, and maintain scalable, reliable, and high-quality software applications and modules.
• Develop clean, maintainable, and well-tested code in line with established engineering standards and best practices.
• Work closely with Product Managers, UX Designers, and business stakeholders to translate user and business requirements into seamless digital solutions.
• Contribute to system architecture discussions and support technical decision-making to ensure solutions remain scalable, maintainable, and high-performing.
• Participate in code reviews to uphold code quality and system consistency, while providing guidance and support to junior engineers within the team.
• Support CI/CD pipelines and cloud-native deployments to maintain system reliability, availability, and security.
• Participate actively in agile ceremonies, including sprint planning, estimation, and retrospectives, to drive continuous improvement and effective project delivery.

Job Requirements:

• At least a Degree in Computer Science, Software Engineering, or a related discipline.
• Minimum 6 years of hands-on software engineering experience, preferably within a full-stack development environment.
• Strong proficiency in modern programming languages such as Python, Node.js, or Go, as well as frontend frameworks including React or Vue.js.
• Experience working with cloud-native technologies and architectures on platforms such asAWS, Azure, or GCP, with exposure to microservices-based systems.
• Familiarity with containerization and orchestration tools such as Docker and Kubernetes, along with CI/CD pipelines and deployment practices.

Ready to apply? Here’s how: 

• Click the APPLY button, or 
• Email your resume (in MS Word or PDF format) to adelin@intuitrecruitment.com. Include the job title in your email subject line for prompt processing. 

Only shortlisted candidates will be notified. 

By submitting your application, you consent to the collection and use of your personal data under Personal Data Protection Act (PDPA). 

Adelin Chong | EA Personnel Reg No.: R1875641 

Intuit Recruitment Pte Ltd | EA License No.: 25C2793 

5 days, 8.30am-6.15pm

Salary: $3500- $6000

Location: Ubi 

Company background:

Specializes in Semiconductor Backend Tooling including Die Attach Tools, Wire Bond Tools & Bond Test Tools

Job Responsibilities:

• Design and development of Semiconductor Tools and mechanical systems.
• Planning, Scheduling and Costing of Tools and Mechanical Modules
• Responsible for 3D & 2D drawings, tolerance analysis, BOM preparation.
• Working closely with Electrical, Vision and Software Engineers.
• Willing to work extended hours in critical phases of project execution.

Job Requirements:

• Diploma or Degree in Mechanical Engineering or related Technical disciplines.
• Minimum 3 years of design experiences in semiconductor tooling
• Experience with Design and Development of High-Speed Pick and Place Systems, Flip Chip Bonders, Die Attach Machines, and Lamination Machine is a definite plus
• Proficiency with CAD Software is a must.
• Experience with vision application, thermal modelling, calculation and measurement techniques would be an advantage.

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Key Responsibilities:

• Responsible for the architecture design, RTL encoding (Verilog/SystemVerilog), and functional verification of digital control logic in 3D-NAND memory;
• Design a state machine (FSM) to manage complex NAND operation processes (such as Program, Read, Erase, Copy-back, Suspend/Resume, etc.);
• Develop a command decoder and address/parameter parsing logic to ensure compliance with JEDEC and internal specifications;
• Implement high-precision timing control logic to accurately generate the internal timing signals required for various operations (such as tR, tPROG, tBERS, etc.);
• Deeply involved in the physical layer and link layer logic implementation of ONFI (Open NAND Flash Interface) or Toggle Mode interface protocols, supporting DDR, NV-DDR, NV-LPDDR, and other modes;
• Collaborate with the analog/mixed-signal team to define array access timing, voltage switching windows, and read/write path control interfaces;
• Collaborate with firmware (FW) and system architecture teams to develop register maps, interrupt mechanisms, error handling strategies, and debug interfaces;
• Support UVM verification environment setup, provide Design for Testability (DFT) support, and participate in FPGA prototyping;
• Participate in chip bring-up, post-silicon debugging, and performance optimization to ensure products meet specification requirements.

Required Qualifications:

1. Education: Master's degree or above
2. Major: Microelectronics and Integrated Circuits, Electrical Engineering, Computer Engineering, or related fields;
3. Other Requirements:

• Minimum 5 years digital IC design experience, experience in NAND Flash or SSD controller projects is a plus;
• In-depth understanding of ONFI 4.x or Toggle 2.0/3.0 protocol specifications, with practical interface IP development or integration experience;
• Experience in control logic design under 3D-NAND or TLC/QLC architectures is a plus;
• Familiar with ECC control interfaces (such as LDPC/BCH engine scheduling and interaction);
• Excellent cross-functional collaboration skills, able to communicate efficiently with simulation, firmware, verification, testing, and product teams to jointly develop technical solutions.
• Experience with successfully tape-out and mass-produced memory chip projects is a plus.

ACMV Engineer (Air Conditioning and Mechanical Ventilation Engineer)

Working Days: Monday – Friday
Working Hours: 9am – 5.30pm
Salary: $ 3,800 - $ 5,000
Working Location: Eunos

Industry: Interior Design & Construction Company

Job Responsibilities:

• Design and planning of ACMV and MV systems
• Preparing and submitting tenders (Tender Costing)
• Conducting site surveys and managing the construction site (Site Management)
• Familiar with and arranging ACMV related services
• Assisting in the procurement of engineering equipment and materials (Procurement)
• Supervising on-site installation work to ensure compliance with drawings and specifications
• Assisting in testing and commissioning (T & C) Commissioning) Assisting with system troubleshooting and problem solving
   

Requirements:

• Diploma in Engineering-related experience (Mechanical, Electrical or construction services preferred)
• 2+ years of relevant work experience
• Familiarity with local regulations and standards preferred 

Chin See Min Reg No. : R22107450

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Location: No. 7 Tuas Avenue 16 Singapore 638934 (Company transport at designated pick up points - Jurong east, Bukit batok, Choa chu kang, Lakeside, Tuas crescent etc)

Working Days: 5 days A Week

Working hours : 8:00am - 5:00pm or 9:00am - 6:00pm (40 hrs per week)

Salary : $2,800 to $4,200 (Based on market rate, subject to individual’s qualification & experience)

Overview

• We are a public-listed company that specialises in the manufacturing of steel prefabricated reinforcement for the construction industry. We are seeking suitably qualified personnel to join our team.

Roles & Responsibilities:

• Extract bill of quantities for steel reinforcements from structural drawings to ensure accurate material planning
• Schedule and draft technical drawings using appropriate tools for submission and production purposes
• Coordinate technical issues with project site personnel to facilitate smooth project progress
• Attend site discussions as needed to resolve technical queries and support project teams

Requirements:

• Min Diploma in Structural/Civil Engineering or QS / Structural Engineering Design or related discipline to support technical understanding
• Working knowledge of AutoCad and Revit-BIM tools to enhance drawing accuracy and efficiency
• Minimum of 1 year of relevant work experience in a similar field to ensure familiarity with industry practices

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Responsibilities

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Requirements

• Degree in Electrical/Mechanical Engineering
• No experience needed, training provided

Interested candidates, please forward your resume to jalenetan@recruitexpress.com.sg

Consultant: Jalene Tan (R26160390)
Recruit Express Pte Ltd (99C4599)

Field Application Engineer

Salary: $3,800 - $4,600 + Performance Bonus + Claims
Working Hours: Monday - Friday, 8:30am - 5:30pm
Location: Tai Seng

Key Responsibilities

• Drive design-in activities and promote semiconductor solutions to customers.
• Identify and develop new demand-creation opportunities within assigned accounts.
• Collaborate closely with global suppliers and principals on technical promotion initiatives.
• Provide hands-on technical support, troubleshooting, and application guidance to customers.
• Assist customers in the design and implementation of MCU, Analog, and Power solutions.
• Conduct product presentations, technical workshops, and training sessions.
• Support customers throughout the product development lifecycle, from concept to production.
• Build strong technical relationships with customers and key stakeholders.

Requirements

• Diploma or Degree in Electronics & Electrical Engineering.
• 1–2 years of relevant experience within the electronics or semiconductor industry.
• Knowledge or hands-on experience in: Microcontrollers (MCU) and Analog circuits
• Well versed in Power management solutions

Key Responsibilities:

• Lead the architecture design (e.g. memory cells, select transistors, and peripheral devices), process integration, electrical characterization, modeling and simulation, failure analysis for 3D NAND devices.
• Design and execute DoE, analyze the impact of process variations on device performance and reliability (such as durability and data retention), and propose improvement solutions.
• Collaborate with the process development team to assess new device architectures, driving technology iteration.
• Write detailed technical reports and support customers or internal teams in resolving related technical issues.

Required Qualifications:

1. Education: Master's degree or above
2. Major: Microelectronics, physics, material science & engineering, chemistry;
3. Other Requirements:

• 8+ years of semiconductor device work experience, 3+ years of 3D NAND work experience.
• In-depth knowledge of 3D NAND device physics, familiar with its principles, failure modes, and reliability mechanisms.
• Troubleshooting, and problem-solving capabilities, with experience in successfully improving device performance or yield.
• Familiar with advanced semiconductor manufacturing processes and integration flows.
• Strong cross-team communication and collaboration skills.

Job Description

• Preparation & Review of Load lists, Single Line diagram of PCC, MCC, DB's, Equipment Sizing Calculation,
• Electrical room layouts, Cable and Power Layout, Substation Equipment layout, Earthing & Lightning protection
• Layout.
• Design and develop cable raceway design.
• Design and develop busduct. Busbar routing drawings
• To coordinate and liaise with sub-contractor on project related matters to ensure to smooth execution of site
• work.
• Able to resolve technical issues related to installation, commissioning and testing
• Ensure the installation works are done according to the approved shop drawing, method statement, project
• specifications and relevant standards.
• Attend regular site meetings with Clients/Sub-contractors to discuss and resolve the site matters.
• To assist Project/Site/Construction Manager on handling and monitoring the project progress.
• Review project specifications, technical proposal/design documentations from the electrical subcontractor/supplier and liaise with project consultant / client for the approval of technical documentations/drawings
• Preparation of Material Requisition, Specifications, Technical Bid Evaluation for Electrical works
• Reviewing Vendor Drawings for Transformers, Switchgears, Cables, Distribution Boards, Junction Box, LCS,
• Motors etc.
• Knowledge of AC/DC Power Distribution Systems including selection of circuit breakers, power supplies, contractors, cable sizing, etc.
• Able to check electrical design code of practice IEC, IEEE, Singapore Standards.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Willing to take on responsibility and make effort to meet project deadlines.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines

Requirements

• Preferably Bachelors’ Degree in Electrical Engineering
• Preferably Minimum 5 years of experience
• Experience with AutoCAD, REVIT, MS Excel, MS Word, ETAP and PDF editing related software
• Basic knowledge and experience of Microsoft Office tools.

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

The CQV Engineer is responsible to support commissioning, qualification and validation activities for GMP process equipment and utilities in a pharmaceutical / biotechnology environment. Focus on equipment such as stainless steel vessels, CIP/SIP systems, thermal systems and related process utilities. Prepare, execute, review and close CQV documentation in line with GMP, GDP and project requirements.

Key Responsibilities

• Prepare and execute CQV documents, including: Commissioning protocols, IQ / OQ / PQ protocols, Test scripts, Qualification reports, Deviation reports, Traceability matrices
• Support qualification of stainless steel vessels, including: Mixing vessels, Holding tanks, Buffer / media preparation vessels, Process tanks, Product-contact equipment
• Perform Material of Construction checks for stainless steel equipment, including verification of: MOC certificates, Surface finish, Welding documentation, Passivation records, Product-contact parts, Gasket / seal materials
  
• Support CIP and SIP qualification, including: Cycle verification, Sprayball coverage checks, Flow / pressure / temperature verification, Conductivity checks, Hold time verification, Drainability checks, Sterilisation cycle assessment
• Support thermal mapping / temperature qualification activities for GMP equipment and systems.
• Execute qualification testing and document results in accordance with approved protocols.
• Use Kneat for protocol execution, review, comment resolution and document lifecycle management.
• Support FAT / SAT, commissioning walkdowns and system handover activities.
• Review vendor documents, drawings, P&IDs, datasheets, manuals and calibration records.
• Raise and support closure of deviations, punch items, non-conformities and qualification discrepancies.
• Work with QA, Engineering, Manufacturing, Automation, Vendors and Project teams to ensure timely CQV completion.
• Ensure all qualification activities comply with GMP, GDP, data integrity and site SOP requirements.

Required Qualifications

• Degree / Diploma in Engineering, Biotechnology, Pharmaceutical Science, Life Sciences or related discipline.
• 3 to 5 years of relevant CQV experience in pharmaceutical, biotech, biologics or GMP manufacturing environment.
• Hands-on experience with CIP, SIP, thermal mapping and stainless steel process equipment.
• Experience performing Material of Construction checks for GMP equipment.
• Familiar with IQ / OQ / PQ execution and GMP documentation requirements.
• Experience using Kneat for validation document execution and review.
• Able to read and understand P&IDs, equipment drawings, datasheets and vendor technical documents.
• Good understanding of GMP, GDP, deviation management and change control.
• Strong documentation discipline and attention to detail.
• Able to work independently on site and coordinate with cross-functional teams.

Why join us?

• Generous Leave Policy.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions? If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

Summary:

• 5 days Work

• Entry Level are welcome!

• Various industries: Aviation/ Marine/ Automotive/ Enginering Solutions

• Multiple locations hiring: West/ North/ East

• Basic Salary : $2200 - $3000 

• Good Allowance, Bonus and AWS

Job Scope:

• Perform on-site servicing, maintenance, and troubleshooting of machinery to keep operations running smoothly.

• Monitor equipment performance to ensure systems operate efficiently and reliably.

• Assist with the installation, setup, and commissioning of new machines.

• Work with engineers and technicians to support daily operations and technical tasks.

• Attend to client service calls, identify issues, and resolve them quickly.

• Carry out routine inspections to keep equipment in good condition and meeting standards.

• Plan and perform preventive maintenance to minimize downtime and extend equipment lifespan.
  

Requirement:

• Min Nitec/ Higher Nitec/ Diploma in Electrical/ Mechanical/ Marine or other engineering related

• 2 years relevant experiences will be advantage

• Entry level welcome to apply, training will be provided
  

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

Overview

Element has an opportunity for an Associate Engineer to join our rapidly expanding team. As a member of the operations team, the Engineer position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision. This role is based in Tuas Loop, Singapore.

Responsibilities

- Closely involved – as a contributing team member – with a variety of assignments with the laboratory

- Accountable for technical activities of a limited scope and may attain additional responsibilities for release of standard and/or routine data to clients

- Conduct Routine Tests such as stripping test, moisture content, rebar’s geometrical measurements

- Work with Engineer and lead with advanced tests, including tensile test and ad-hoc experiments.

- Accurately record and report data from tests.

- Possess the ability to effectively contribute to technical presentations and communications within the engineering discipline

Skills / Qualifications

- Possess a Diploma in Mechanical Engineering

- Working knowledge of laboratory safety

- In-depth understanding of testing concepts

- Ability to analyze and compile testing data from the tests performed

- Possess strong computer skills

Company Overview

Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to ‘Make tomorrow safer than today’.

When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access.

While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization.

Job Responsibilities:

1. Automation System Design & Implementation

· Design, develop and implement automation solutions for manufacturing processes to improve productivity, quality and cost efficiency.

· Integrate automation systems with injection moulding machines, assembly machines, conveyors, vision systems and testing equipment.

2. Injection Moulding & Assemble Automation Support (Added Advantage)

· Support automation integration for injection moulding machines, including robot take-out, insert loading, degating and post-moulding operations.

· Develop and optimize automation solutions for assembly machines such as part feeding, pick-and-place, screw fastening, press-fit and functional testing.

· Work closely with Process Engineers to improve cycle time, reduce manpower and minimize rejects.

3. Programming & Control Systems

· Program and troubleshoot PLCs, HMIs, robots (e.g. Fanuc, Yaskawa, ABB, Epson), and motion control systems,

· Develop and modify automation logic, sequences, interlocks and safety circuits.

· Ensure proper communication between machines using industrial protocols (Ethernet/IP, Profinet, Modbus and etc).

4. Troubleshooting & Maintenance

· Diagnose and resolve automation system faults, breakdowns and performance issues with minimal downtime.

· Provide on-site technical support during production, mould trials and new product launches.

· Conduct preventive maintenance and improvement activities on automation equipment.

5. Machine & Process Improvement

· Analyze existing production processes and identify opportunities for automation, cycle time reduction and efficiency improvement.

· Lead continuous improvement projects to enhance machine reliability, OEE and process stability.

· Support poka-yoke (error-proofing) and vision inspection implementation.

6. Safety, Compliance & Documentation

· Ensure automation systems comply with machine safety standards and company EHS requirements.

· Prepare and maintain automation documentation such as electrical drawings, PLC programs, SOP and risk assessments.

· Support IQ, OQ and PQ activities related to automated equipment where applicable.

7. Cross functional Collaboration

· Work closely with Engineering, Production, Quality and Maintenance teams to ensure smooth automation deployment.

· Coordinate with machine suppliers, system integrators and vendors for installation, debugging and upgrades.

· Provide training to technicians and operators on automation system operation and basic troubleshooting.

8. Project Management & Support

· Manage timelines, technical deliverables and project documentation.

· Assist in cost estimation, RFQ evaluation and automation feasibility studies.

Job Requirements:

· Minimum 1 to 3 years of hands on experience in industrial automation within medical device and/or precision plastic manufacturing environments.

· Strong working experience with injection moulding machines. Including robot take-out, insert loading, degating and post moulding processes.

· Proven experience in automation of assembly machines, such as part feeding, pick and place, press fit, screw fastening, welding and functional testing.

· Strong troubleshooting, problem solving and root cause analysis skills with ability to support production independently.

· Proficient in MS Office and other relevant software.

Work Location:   9 Tuas Drive 1 , Singapore 638676

Working Hours: Monday to Friday (8:15am to 5:30pm)

Job Description:

• Contribute to Life Science projects for Antaes Asia clients
• Develop and execute CQV documentation including commissioning protocols, FAT/SAT reports, IQ/OQ/PQ protocols, summary reports, and traceability matrices.
• Support end-to-end CQV lifecycle for process, utility, and support systems — e.g. bioreactors, chromatography skids, filtration units, CIP/SIP, WFI, HVAC, autoclaves, and clean utilities.
• Participate in design reviews (URS, FDS, P&ID walkdowns) to ensure CQV considerations are integrated during project design and construction.
• Manage execution of commissioning and qualification activities in alignment with project schedules, safety standards, and GMP compliance.
• Support automation qualification (DeltaV, PLC, SCADA) and ensure integration with process control systems.
• Review vendor documentation and coordinate FAT and SAT with suppliers and engineering teams.
• Troubleshoot and resolve technical issues encountered during CQV execution.
• Ensure all CQV deliverables meet internal Quality and Validation standards, and align with site Validation Master Plan (VMP).
• Support handover of qualified systems to Manufacturing and Maintenance teams, including training and documentation.
• Collaborate closely with cross-functional teams including Engineering, QA Validation, Manufacturing, and Automation.
• Contribute to the promotion of Antaes services on top of assistance provided to clients.

Job Requirements:

• Bachelor’s Degree in Chemical, Mechanical, Biomedical, or related Engineering field.
• 3–7 years of CQV experience in the pharmaceutical industry.
• Strong understanding of GMP, GEP, ISPE Baseline Guides, ASTM E2500, and FDA/EMA validation expectations.
• Experience in process equipment qualification (bioreactors, chromatography, UF/DF, CIP/SIP), clean utilities, and automation integration.
• Familiar with risk-based CQV approach and change control processes.
• Proficiency with documentation management systems (e.g., Veeva).
• Candidate must be highly motivated, be able to work independently as well as in a team and have good organizational and oral and written communication skills.
• Excellent communication skills, both written and verbal, in English - to coordinate and liase with English speaking counterparts.

Responsibilities

Equipment Automation Development

• Design, develop, deploy, and maintain Equipment Automation Programs (EAP) for assembly and test manufacturing equipment.
• Implement equipment integration using industry-standard protocols such as SECS/GEM.
• Support equipment recipe download/upload, remote control, and process parameter management.

Factory Integration

• Integrate new production equipment into the factory automation ecosystem.
• Collaborate with equipment vendors to develop and validate automation requirements.
• Perform equipment buyoff, qualification, and factory acceptance testing.
• Ensure seamless data exchange between equipment and manufacturing systems.

Production Support

• Provide 24/7 support (on-call when required) for equipment automation issues impacting production.
• Troubleshoot communication failures between equipment and host systems.
• Perform root cause analysis and implement corrective/preventive actions.
• Monitor EAP system health and equipment connectivity status.

System Enhancement

• Develop automation features to improve productivity, OEE, traceability, and manufacturing efficiency.
• Implement smart factory initiatives including Automated lot dispatching and Real-time equipment monitoring.
• Predictive maintenance data collection.

Industry 4.0 initiatives

• Support digitalization and manufacturing analytics projects.

Requirements

• Bachelor's degree in Computer Science/Computer Engineering/Electrical Engineering/Mechanical Engineering.
• 2 to 8 years of experience in semiconductor manufacturing, factory automation, or industrial automation.
• Experience in OSAT, wafer fabrication, electronics manufacturing, or high-volume manufacturing environments preferred.
• Strong troubleshooting and analytical skills.
• Strong knowledge of equipment automation protocols such as Secs/Gem, Semi E84.
• Experience in programming languages such as C#, python, etc.