Total 4,705 Engineering job vacancies

Job Description:

• In charge of designing the PCB layout of electronic circuit boards and generate Gerber files for PCB fabrication.
• Responsible in research and define efficient and reliable architecture to fulfil electronic circuit board requirements for the company drone systems.
• In charge of firmware programming in embedded C/C++ language.
• In charge of testing PCB assemblies thoroughly and ensure they operate as expected.
• Responsible in sourcing suitable electronic components to implement the design architecture.
• In charge of studying datasheets of the electronic components and design the schematic of electronic circuit boards that can fulfil the requirements.
• Responsible in generateing documents and drawings of design and test.

Job Requirement:

• Minimum Degree in Mechanical/ Electrical/ Aerospace/ Mechatronics Engineering or relevant
• Minimum 3 years of working experience in electronic hardware and firmware design
• Experience in analog and digital circuit design with experience in designing electronic circuits with microcontrollers, digital signal processors (DSP), field programmable gate arrays (FPGAs), etc
• Proficient in schematic and PCB design tools such as Altium Designer, OrCAD Capture and PCB Designer, Autodesk EAGLE, etc and using instruments such as multimeters, oscilloscopes, logic analysers, etc. to troubleshoot issues on electronic circuit boards.
• Proficient in C/C++ programming language.
• Knowledge in various communication buses and protocols such as UART, I2C, SPI, CAN, Ethernet, etc.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of ensuring the implementation of Lean/Continuous Improvement tools & Lean projects in the company
• Responsible for expanding and sustaining the lean deployment efforts through facilitating Value Stream Mapping (VSM), Kaizen and Continuous Improvement events
• In charge of identifying, deployment and driving successful completion of Lean projects/initiatives
• In charge of leading Continuous Improvement initiatives and managing the efficiently the sharing of best practices among departments

Job Requirement:

• Minimum Degree in Aersopace Engineering or relevant
• Minimum 5 years of working experience in driving continous improvement projects
• Experience in Lean Six Sigma Green/Black Belt, JIRA, Power BI, VBA and Macros will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Metal Casting Process

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

·       Responsible for managing a team of M&ECoordinators and BIM Modellers in the design and coordination works

·       Attend project meetings and establish businessrelationship with the clients, consultants and contractors.

·       Coordinate closely with the project team members onconstruction activities, including site logistic, building management, and submissionsto relevant authorities.

·       Liaise with the M&E sub Contractors on co-ordinationand installation, testing and commissioning

·       Monitor site progress, ensure compliance withspecifications, and maintain quality standards

·       Support project documentation, including shop drawings,method statements, and as-built drawings

Requirements:

• Degree in Mechanical or Electrical Engineering (recognized by Singapore PE Board)
• Minimum 5 years of experience in construction industry
• Proficient in BIM and AutoCAD

Responsibilities:

• In charge of managing and supporting planning and procurement of medical, non-medical equipment, and furniture
• Plan and lead user workgroups by organising regular meeting sessions, setting goals and targets, facilitating useful and productive discussions, guiding user departments, as well as reviewing performance indicators and work plans
• Responsible for budgetary planning and control, ensuring that the development keeps within budget
• Work closely with user department and various stakeholders in the preparation of medical, non-medical equipment and furniture specifications for tenders
  Provide recommendation to users based on technical compliance of medical, non-medical equipment and furniture in tender submissions
• Attach to Group team to familiarise with Group BME policies and procedures through supporting the daily operations to align with organisation and regulatory requirements
• Liaise and manage external contractors on service and tender commitment issues Provide technical advisory to end users and senior management on medical, non-medical equipment and furniture related issues
• Perform any other duties as assigned

Requirements

• Min Degree in Electronics or relevant Engineering course
• Min 3 years of experience in service and maintenance of medical equipment.
• Experience in Healthcare/Hospitals

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities

• Oversee the organization’s IT infrastructure, ensuring optimal performance, security, and reliability of servers, network and security systems, as well as cloud services.
• Design, implement, and maintain the IT infrastructure of the organization.
• Maintain Windows servers, virtualization platforms, and storage solutions.
• Manage Active Directory, DNS, DHCP, and Group Policy.
• Ensure high availability and disaster recovery with backups and replication.
• Monitor system performance, troubleshoot issues, and apply patches and updates.
• Implement network design, configure, and maintain LAN, WLAN, and VPN infrastructure, managing firewalls, switches, and routers.
• Implement and monitor network security policies, intrusion detection, and access control.
• Optimize network performance, troubleshoot connectivity issues, and ensure redundancy.
• Implement cybersecurity best practices, monitor threats, and manage endpoint protection and vulnerability assessments.
• Ensure compliance with regulations.
• Conduct security audits and enforce policies on user access, encryption, and authentication.
• Create and maintain network documentation, including network diagrams, configurations, and procedures.
• Carry out any other tasks assigned by the management

Requirement

• Min Degree in Information Technology or relevant
• Min 5 years of experience in providing Network, System and Cybersecurity operational support.
• Experience with servers, network and security devices, firewall, switches, routers, load balancers and wireless solutions.
• Certifications in CCNA/ CCNP/ CCIE/ Microsoft certified Azure Solutions Architect and/or Windows Server Administrator, CISSP, CISM and CompTIA Security will be required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

• Perform process setup and buyoff for both Drive Backend Assembly, ensuring that yield, cycle time, and quality outcomes meet defined targets
• Support product ID label buyoff to ensure compliance with product specifications and standards• Monitor production yield to detect any excursions, conduct process mapping, and implement immediate containment (stop bleeding)
• Establish hypotheses, design experiments to identify root causes, propose corrective actions, and report findings to engineers
• Escalate process and technical issues appropriately per PMP requirements
• Conduct basic data queries and analysis to provide relevant information and insights for engineering teams
• Ensure process sustainability by monitoring KPIVs/KPOVs and managing Fast Triggering systems to maintain stable and controlled operations
• Lead or participate in continuous improvement projects aimed at enhancing production efficiency in a consistent and sustainable manner
• Perform additional tasks and responsibilities as assigned to support team, department, and company Objectives and Key Results (OKRs)

Requirements:

• Diploma in Engineering and related disciplines
• Strong data querying and analytical capabilities
• Proficient in English with strong verbal and written communication skills
• Able to perform effectively under pressure and meet deadlines
• Demonstrates strong resilience, adaptability, and positive work attitude

To submit your application, please apply online to apply@rn-care.com or call +65 6514 9838 for a private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

A banking institution is looking for an Infrastructure Automation Engineer to build self-healing infrastructure automation using AI, RPA, and orchestration tools—moving from manual operations to intelligent, event-driven automation.

Key Responsibilities

• AI-Powered Automation: Develop AI-enabled workflows for incident detection, analysis, and remediation, integrating LLMs (OpenAI/Claude) for intelligent decision-making and root cause analysis

• Infrastructure Automation: Build Ansible playbooks for automated remediation and configuration management across Unix, Windows, Network, and Firewall domains, integrated with orchestration tools (Ansible Tower, APIs)

• Use Case Delivery: Implement key AI use cases including backup failure analysis with auto-remediation, and intelligent incident handling via API integrations (e.g., NetBackup)

• Platform Integration: Connect monitoring tools (Elastic/Dynatrace), CMDB (Device42), and AI platforms into an end-to-end AI + automation ecosystem

• Collaboration & Enablement: Work closely with infrastructure platform teams to build shared automation capabilities, driving a Build → Upskill → Transfer model to domain teams

Requirements

• Strong experience with Ansible, automation scripting, and Python

• Deep understanding of infrastructure systems (Unix, Windows, Network)

• Hands-on with APIs, system integration, and event-driven architecture

• Exposure to AI/LLM integration (OpenAI, Claude) and RPA tools (UiPath)

• Experience with AIOps and observability tools (Elastic, Dynatrace)

• Proven ability to deliver infrastructure automation at enterprise scale

• Able to bridge infrastructure, AI, and automation effectively
  

  Interested candidates please email your latest resume to subagio@tangspac.com

• Well Established Security Technology Company

• Salary: $4500 - $5500 + $300 Allowance

• Working Hours: 8:30am - 5:30pm (Monday - Friday)

• Working location: Jurong (Based on Project Site)

• Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Deploy, configure, and maintain the VMware Cloud Foundation (VCF) infrastructure (vSAN, NSX, vCenter, SDDC Manager).
• Deploy, configure, manage, and troubleshoot VMware Tanzu and Kubernetes clusters for application hosting.
• Utilize Aria Automation and GitLab CI pipelines for automated resource provisioning and application deployments.
• Administer, configure, and troubleshoot Linux and Windows server operating systems, web servers (Tomcat, Apache, IIS), and applications.
• Monitor system performance, health, and resource utilization within the VCF, Tanzu, and Kubernetes environments.
• Implement security hardening baselines and oversees security testing (DAST, SAST, PT, SVS) based on policies.
• Troubleshoot and resolve complex infrastructure and application issues.
• Collaborate with HQ technical teams and government CISO Teams, providing operational feedback and addressing issues.

Requirement

• Higher NITEC/Diploma in IT Engineering or relevant certifications such as CISSP/CCNA/CCNP
• 1 - 2 years of relevant experience
• Experience with cloud environment deployment and maintenance is an advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492

Key Responsibilities

• Review and assess AC and DC marine power system designs, philosophies and integration arrangements
• Conduct detailed review of analytical studies including:
  - Load flow and dynamic response
  - Short-circuit and selectivity
  - Protection coordination and relay settings
  - Harmonics, transient stability & power quality
  - Arc flash and fault containment
• Evaluate system layouts including MV/LV switchboards, distribution systems, propulsion networks and emergency supplies
• Analyse and verify hybrid/alternative configurations (e.g., ESS/battery, DC grid, power converters and drives)
• Prepare technical assessments, gap analysis and recommendations based on study outcomes
• Review vendor submissions, SLDs, schematics, and electrical calculation reports
• Implement class and regulatory compliance (DNV, ABS, LR, IMO, IEC)
• Support FAT/SAT and commissioning from a systems perspective
• Present findings and risk-based recommendations to project teams and clients

Job Requirements

• Degree in Electrical or equivalent
• 4+ years’ experience in marine, offshore, industrial, or power systems engineering
• Demonstrated experience in AC and DC network analysis

Desired Skills

• Ability to interpret vendor data and detect design inconsistencies
• Strong analytical writing and communication skills

What We Offer

• A technically focused role with access to cutting-edge projects (newbuilds + retrofit)
• Supportive engineering culture and professional development pathways
• Competitive salary and benefits package

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success, we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail and supply chain.

We are currently looking to hire a Backend Systems Engineer - IOT/Smart City. This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

ROLES AND RESPONSIBILITIES
Join the Software Engineering team on a physical Operations Technology (OT) integration project. You will build and maintain the backend systems that connect OT field devices to the digital twin platform — handling real-time data ingestion, protocol translation, and system integration across industrial communication standards.

Key Responsibilities

• Develop and maintain backend services and middleware for OT/IoT data ingestion using OPC-UA, MODBUS, and MQTT protocols.
• Build data pipeline components that normalise, process, and route telemetry from field devices to platform services and 3D visualisation layers.
• Integrate AI coding tools (e.g. Claude, Copilot) into daily development workflows for code generation, unit testing, and validation — this is an expected practice, not optional.
• Write and maintain automated test suites covering protocol adapters, data transformation logic, and integration endpoints.
• Collaborate with frontend Unity engineers and systems architects to define and implement API contracts (REST/WebSocket).
• Participate in code reviews, contribute to technical documentation, and support deployment through CI/CD pipelines.
• Troubleshoot field connectivity and protocol issues; work with OT/hardware teams on device commissioning and debugging.

Must-Have Requirements

• Hands-on experience with OPC-UA, MODBUS, and MQTT — protocol implementation, not just conceptual familiarity.
• Proficiency in backend development (Python, Node.js, Go, or Java — at least one).
• Active use of AI tools for coding, testing, and validation in prior roles or personal projects.
• Experience writing integration and unit tests; familiarity with test automation frameworks.
• Comfortable working with message brokers (MQTT brokers, Kafka, or similar) and time-series or event-driven data.

Good to Have

• Exposure to digital twin platforms or industrial IoT stacks.
• Familiarity with OT security considerations (network segmentation, secure protocol configuration).
• Experience with containerisation (Docker/Kubernetes) and CI/CD tooling.
• Knowledge of BACnet, DNP3, or other industrial protocols.

Experience

2–5 years in backend or systems software engineering, with at least some exposure to OT/IoT environments. Degree in Computer Science, Engineering, or equivalent practical experience.

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to keerthana@aven-sys.com. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name: Keerthana Ramakrishnan

Avensys Consulting Pte Ltd

EA License 12C5759

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' privacy policy.

We are hiring Module Engineers (Process / Equipment) to support advanced semiconductor wafer fabrication in a high-volume manufacturing environment. This role focuses on Diffusion, Ion Implantation, Etch, or Thin Film deposition processes, ensuring stable tool performance, high yield, and continuous process improvement.

This is an excellent opportunity for engineers with semiconductor manufacturing, wafer fabrication, process engineering, or equipment engineering experience to grow in a leading global semiconductor company.

Key Responsibilities

• Support daily semiconductor wafer fabrication operations within assigned module (Diffusion / Implant / Etch / Thin Film)

• Perform process monitoring, equipment troubleshooting, and root cause analysis (RCA)

• Drive yield improvement, defect reduction, and process optimization initiatives

• Execute statistical process control (SPC), data analysis, and process capability monitoring

• Support equipment qualification, preventive maintenance (PM), and tool recovery

• Collaborate with Process Integration, Manufacturing, and Equipment Engineering teams

• Participate in continuous improvement (CI), lean manufacturing, and cost reduction projects

• Ensure compliance with safety, cleanroom protocol, and semiconductor quality standards

Requirements:

• Degree / Diploma in Electrical Engineering, Mechanical Engineering, Chemical Engineering, Materials Science, Physics, or related discipline

• Experience in semiconductor manufacturing / wafer fabrication environment preferred

• Exposure to Diffusion, Ion Implant, Etch, or Thin Film processes is highly advantageous

• Knowledge of SPC, DOE, 8D, RCA, or yield management tools

• Strong analytical, troubleshooting, and problem-solving skills

• Familiar with cleanroom operations and high-volume manufacturing (HVM) environment

• Good team player with strong communication skills

• Willing to work in shift rotation (if required)

How to apply: Interested candidates, kindly email updated resume to xiaoyee@wanco-manpower.com with Subject of "Engineer", thank you.

Job Summary:

We are seeking a skilled Computational Fluid Dynamics (CFD) Simulation Engineer to support the simulation and analysis of fluid flow, thermal simulation, and related physical phenomena in product development. The ideal candidate will have experience with industry-standard CFD tools and a solid foundation in fluid mechanics, thermodynamics, and simulation-driven design optimization.

Key Responsibilities:

• Perform CFD simulations to support design, development, and optimization of products and systems
• Analyze and recommend designs changes in fluid flow, thermal performance, aerodynamics, and/or cooling efficiency as required by the project
• Develop computational models, define boundary conditions, mesh geometry, and run simulations using tools such as ANSYS Fluent, FloEFD, or other CFD software packages
• Interpret simulation results, create reports, and provide actionable recommendations to design and product teams
• Collaborate with cross-functional teams including design, testing, and manufacturing to integrate simulation insights into product development
• Initiate experiments to gather insights that connect the gaps between simulation models, products, and systems as needed
• Validate simulation results with physical test data and refine models as necessary
• Maintain simulation best practices and contribute to the development of simulation standards and procedures
• Stay current with emerging CFD technologies and techniques

Requirements:

• Master’s degree or higher in Mechanical Engineering, Aeronautics Engineering, Physics or relevant disciplines
• Minimum 2 years of relevant experience in fluid flow / thermal simulation
• Experience in mechanical design and experimental techniques preferred
• Programming knowledge in C/C++ and/or Python
• Proficiency in using simulation software packages such as ANSYS Fluent, FloEFD, COMSOL, or similar CFD tools

Key Responsibilities

• Conceptualize, design, and develop automation equipment and mechanical systems for cleanroom and industrial applications.
• Prepare engineering design, detailed drawings, and project cost estimation.
• Manage projects from concept stage to manufacturing and final commissioning.
• Work closely with cross-functional teams to implement design improvements and cost optimization for existing platforms.
• Provide technical solutions and troubleshooting for design issues during project execution.
• Review and verify engineering drawings and designs to ensure technical accuracy and compliance with customer requirements.
• Liaise with customers on technical specifications, design reviews, and product requirements.
• Lead machine installation, testing, and commissioning at customer sites when required.
• Ensure designs comply with relevant engineering standards (ISO9000, SEMI-S2, SOP39)

Requirements

• Diploma or Bachelor's Degree in Mechanical Engineering or related field.
• Minimum 5 years of experience in mechanical design, preferably in automation equipment, semiconductor, HDD, or precision engineering industries.
• Proficiency in SolidWorks and AutoCAD is mandatory.
• Experience in pneumatic system design and pneumatic circuit diagram preparation is required.
• Knowledge of linear motion systems
• Strong experience in preparing fabrication drawings, assembly drawings, and machine layout drawings.
• Strong problem-solving ability with a practical engineering mindset.
• Self-motivated, organized, and able to work in a fast-paced project environment.
• Good communication skills in English.

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

Job Summary 

We are looking for a QC Equipment Qualification Specialist to support qualification, lifecycle management, and decommissioning activities for Quality Control laboratory equipment within a GMP-regulated manufacturing environment. 

This role will support the execution and coordination of qualification activities, change control, validation documentation, and equipment lifecycle compliance. The successful candidate will work closely with QC, Validation, Engineering, Quality Assurance, and external vendors to ensure laboratory equipment is qualified, documented, and maintained in accordance with site and regulatory requirements. 

Your Missions 

• Support qualification activities for QC laboratory equipment in accordance with GMP, validation lifecycle, and change control requirements. 

• Coordinate and execute equipment qualification activities including IQ, OQ, and PQ where applicable. 

• Support decommissioning activities for QC laboratory equipment following approved procedures and compliance requirements. 

• Assist in defining project plans, timelines, documentation needs, and coordination activities for qualification and decommissioning projects. 

• Prepare, review, and maintain qualification protocols, reports, SOPs, risk assessments, and training materials. 

• Support deviations, investigations, CAPA, and change control activities related to laboratory equipment and qualification processes. 

• Review qualification and validation documentation to ensure completeness, traceability, and compliance with GMP and site quality expectations. 

• Collaborate with QC, Validation, Engineering, Quality Assurance, and vendors to ensure timely execution of project activities. 

• Ensure proper documentation practices, data integrity, and compliance standards are followed for laboratory equipment systems. 

• Support equipment integration activities where applicable, such as LabX connectivity or related laboratory data systems. 

• Track action items, project milestones, risks, and implementation progress to support delivery within agreed timelines. 

Your Profile 

• Bachelor’s degree in Engineering, Life Sciences, Biotechnology, Pharmaceutical Sciences, Chemistry, or a related discipline. 

• 5–8 years of experience in qualification, validation, commissioning, or lifecycle management within GMP-regulated manufacturing or laboratory environments. 

• Hands-on exposure to QC laboratory equipment qualification and validation activities. 

• Good understanding of GMP documentation, validation lifecycle, change control, deviation, and CAPA processes. 

• Experience preparing or reviewing qualification protocols, reports, SOPs, risk assessments, or validation documentation. 

• Familiarity with analytical or laboratory equipment such as continuous flow analysers, nitrogen analysers, TOC systems, gas generators, analytical balances, microbalances, or similar laboratory instrumentation would be an advantage. 

• Exposure to laboratory system integration platforms such as LabX or related laboratory software systems is preferred. 

• Strong documentation, coordination, and stakeholder communication skills. 

• Detail-oriented, organized, and comfortable working within structured quality and compliance environments. 

• Able to manage multiple tasks and timelines within project-based environments. 

What We Offer 

• An international community bringing together 110+ different nationalities. 

• An environment where trust has a central place: 70% of our key leaders started their careers at the first level of responsibilities. 

• A robust training system with our internal Academy and 250+ available modules. 

• A vibrant workplace that frequently gathers for internal events, afterworks, and team buildings. 

• Strong commitments to CSR, notably through participation in our WeCare Together program. 

As an Advanced Packaging Characterization Engineer within Advanced Packaging Technology Development (APTD), your responsibilities include but are not limited to providing package development characterization and failure analysis support for development test vehicles, qualifications, customer returns, new product introduction, and general test failures. You are the domain expert on advanced packaging characterization methodology and is responsible for establishing relevant analysis methods needed to support technology development. You will also have a thorough understanding of the product package assembly and process flow, to work with Process Integration, Process Development, and Product Engineering groups ensuring failures are classified and root cause fixes implemented.

Responsibilities and Tasks

Conduct Electrical Characterization

• Understand PFA techniques available for de-processing failures

• Understand assembly and test process

• Perform electrical verification to confirm failures

• Establish best known method for de-processing package

Provide Data Analysis

• Understand backend test flows, qualification methodologies and be able to pull relevant information

Communicate with Internal/External Groups

• Document failure analysis techniques used to isolate failure for other groups

• Quick, responsive analysis and feedback of PFA results to Product, Process Integration, Reliability, Assembly, RMA, and QRA

• Ensure the PFA lab understands best method to obtain results and ensure lab is ready for analysis of new designs

Provide Technical Expertise

• Conduct TMO training and FA certification

• Serve as technical SME and mentor, contributing to the growth of technical capabilities within the team and fostering a culture of continuous learning.

• Participate actively in technical events such as conferences, workshops and forums to share knowledge and BKM across the network.

• Engage industry experts and vendors on cutting-edge FA tools and techniques required for Advanced Packaging development roadmap.

Maintain Equipment

• Coordinate calibrations (external to Micron)

• Procure parts as needed

• Coordinate host vendors to support equipment repair

Manage Laboratory

• Consistently upholds and promotes Micron’s safety standards, ensuring all activities are conducted in a safe and compliant manner.

• Manage laboratory to comply with TS, ISO14001 and OHSAS requirements.

• To manage the exhaust and scrubber systems of the FA Lab.

• To maintain records and procedures as per Micron GOPs

Education and Experience

• PhD, Master’s, or Bachelor’s degree in Materials Science, Chemical Engineering, Electrical/Electronics Engineering or related discipline. 

• 4+ years of experience in the semiconductor process, preferably in R&D or technology development or failure analysis field, with strong expertise in failure analysis methodologies and techniques.

• Hands-on proficiency with key analytical tools and methods, including: SEM, EDX, FIB, TEM, AFM, FTIR, XPS, X-ray, CSAM, Ion Milling, delayering, and decapsulation techniques.

• Strong communication skills with the ability to collaborate effectively across internal teams and external partners.

• A mindset that emphasizes customer focus, continuous improvement, and striving for excellence.

Job Responsibilities:

• Plan, execute, monitor, and control all technical aspects of projects.
• Lead or contribute to new system/network infrastructure setups or upgrades.
• Support operational systems in line with contractual Service Level Agreements (SLAs).
• Conduct routine preventive maintenance and manage operational activities efficiently.
• Prepare comprehensive project documentation and reports.
• Troubleshoot and resolve technical issues promptly.

Requirements:

• Strong knowledge of Windows Server OS and Linux OS; experience in virtualized environments is a plus.
• Hands-on experience with virtualization, hypervisors, and the Nutanix platform is an advantage.
• Understanding of VPNs and firewall appliances is beneficial.
• Familiarity with network switches and routers is preferred.

Contract Duration: 2-3 months (Potential extension of 1 month)

Work Location: Yishun / Bedok / Bukit Batok (assignment location to be confirmed)

Key Responsibilities:
• Audit and optimise Active Directory (AD), DNS, and Group Policy configurations
• Import, test, and deploy standardised GPO templates across infrastructure environments
• Support pilot testing and resolve endpoint or application conflicts
• Execute domain-wide policy updates and infrastructure configuration alignment
• Perform baseline scans, gap analysis, and troubleshooting activities
• Maintain AD, DNS, and DHCP services across physical, virtualised, and cloud environments
• Prepare documentation, compliance reporting, and configuration records

Requirements:
• Experience supporting Windows Infrastructure / Server environments (2-4 years preferred)
• Hands-on experience with Active Directory Domain Services (AD DS), DNS, and DHCP
• Strong knowledge of Group Policy Object (GPO) administration
• Familiarity with Windows OS hardening practices (CIS benchmarks preferred)
• Intermediate PowerShell scripting experience for automation and remote administration
• Experience with CIS-CAT, Nessus, or Microsoft Security Compliance Toolkit is advantageous

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

We regret to inform that only shortlisted candidates will be notified.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Chew Hong Huang

EA Personnel Reg. No.: R24124128

·     
Job Description

·      Join the Software Engineering team on a physical Operations Technology (OT) integration project. 

·      You will build and maintain the backend systems that connect OT field devices to the digital twin platform — handling real-time data ingestion, protocol translation, and system integration across industrial communication standards. 

 Key Responsibilities

·       Develop and maintain backend services and middleware for OT/IoT data ingestion using OPC-UA, MODBUS, and MQTT protocols. 

·      Build data pipeline components that normalise, process, and route telemetry from field devices to platform services and 3D visualisation layers. 

·       Integrate AI coding tools (e.g. Claude, Copilot) into daily development workflows for code generation, unit testing, and validation — this is an expected practice, not optional. 

·      Write and maintain automated test suites covering protocol adapters, data transformation logic, and integration endpoints. 

·      Collaborate with frontend Unity engineers and systems architects to define and implement API contracts (REST/WebSocket). 

·      Participate in code reviews, contribute to technical documentation, and support deployment through CI/CD pipelines. 

·      Troubleshoot field connectivity and protocol issues; work with OT/hardware teams on device commissioning and debugging. 

Required qualification/skills:: 

·      Hands-on experience with OPC-UA, MODBUS, and MQTT — protocol implementation, not just conceptual familiarity. 

·      Proficiency in backend development (Python, Node.js, Go, or Java — at least one). 

·      Active use of AI tools for coding, testing, and validation in prior roles or personal projects. 

·      Experience writing integration and unit tests; familiarity with test automation frameworks. 

·      Comfortable working with message brokers (MQTT brokers, Kafka, or similar) and time-series or event-driven data. 

 Good to Have:: 

·      Exposure to digital twin platforms or industrial IoT stacks. 

·      Familiarity with OT security considerations (network segmentation, secure protocol configuration). 

·      Experience with containerisation (Docker/Kubernetes) and CI/CD tooling. 

·      Knowledge of BACnet, DNP3, or other industrial protocols. 

Experience Required:: 

·      2–5 years in backend or systems software engineering, with at least some exposure to OT/IoT environments.

·       Degree in Computer Science, Engineering, or equivalent practical experience.

Key Highlights | AI Algorithms Engineer (PHD Holder Only)

• 5 Work Days Per Week
• Office Near to Kaki Bukit MRT, Singapore
• Relocate Near Tai Seng MRT in August / September 2026
• Medical Benefits Provided
• Entitled to Yearly Bonus & Performance Bonus

Current Teams are focusing projects on AI Agent, Computer Vision, Vision Language Models (VLMs)

Job Responsibilities:

1. Algorithm Development: Development and optimization of machine learning and deep learning algorithms to solve complex business problems.
2. Model Training and Evaluation: Participate in the construction and training of artificial intelligence models, including but not limited to neural networks, decision trees, etc., evaluate and optimize the models to improve their performance and accuracy.
3. Data Analysis and Preprocessing: Conduct data collection, cleaning, preprocessing and feature engineering, provide high-quality data for model training, and arrange and guide data labelers to carry out data labeling and other work.
4. Collaboration and Deployment: Collaborate with team members to integrate algorithm models into actual business systems, promote the implementation of projects, and realize the intelligent upgrading of products.
5. Research and Innovations: Stay up to date with the latest advancements in AI and ML technologies. Explore and deploy new technologies, drive innovations to create value to market needs, and enhance the company's competitiveness. Audio and video algorithms for surveillance/monitoring applications which also include the research and implementation of algorithms involving target detection, feature extraction, tracking, and recognition.
6. Documentation and Reporting: Maintain comprehensive documentation of algorithms, experiments, and project workflows. Communicate results and findings to technical and non-technical stakeholders.

Job Requirements:

• Min Master's Degree in Computer Science, Applied Mathematics, Electrical Engineering, Pattern Recognition, Artificial Intelligence, Automatic Control, Operations Research, Biology, Physics / Quantum Computing, Neuroscience, Statistics or a related field.
• Familiar with common machine learning and deep learning algorithms and keeping track with the latest SOTA implementations.
• Strong programming skill in Python, C / C++, proficient in mathematical / statistical concepts and exceptional coding skills
• Hands-on experience with AI / ML frameworks be familiar such as Caffe, PyTorch, TensorFlow, MxNet etc.
• Have rich project experience in machine learning and deep learning, be familiar with common algorithm models, such as CNN, RNN, LSTM, Transformer, ViT, etc., and be able to improve and innovate models according to actual problems.
• Experience in familiar the design, parameter tuning and optimization methods of neural network models is a plus
• Experience in model compression and in the transplantation and optimization of deep learning forward inference on various platforms, including NPU / GPU / DSP / ARM on mobile platforms and CPU / GPU on server platforms is also a plus.
• Strong logical thinking and problem-solving ability, able to independently undertake the research and tackling of complex problems and team spirit are highly valued traits.
  
  

Reolink, a leader in intelligent visual technology for homes and businesses, was founded in 2009 by a group of engineers with a strong commitment to and passion for smarter security solutions.

Our products are now trusted by millions of users across more than 110 countries and regions worldwide. Building on this trust, we continue expanding our presence and bringing our innovations to more markets around the globe.

Reolink remains committed to delivering advanced, reliable, and user‑centric solutions that empower people to protect what matters most.

Brief Summary:
Join our dynamic team as a Presales Engineer, where you will collaborate with sales to craft tailored cloud and enterprise IT solutions that meet client needs and drive success.

Responsibilities:

• Collaborate with the sales team to identify customer requirements and create scalable, cost-effective solutions.

• Design and propose comprehensive solutions across cloud, infrastructure, and security areas.

• Conduct engaging technical presentations, product demonstrations, and proof-of-concept sessions for clients.

• Develop detailed technical proposals, including architecture diagrams, written solutions, and cost estimates.

• Coordinate with vendors, distributors, and internal teams for solution validation and pricing.

• Assist with responses to RFPs/RFIs, Statements of Work (SOW), and relevant implementation documentation.

• Ensure solution feasibility in partnership with delivery and engineering teams.

• Stay informed on the latest cloud technologies, market trends, and competitor offerings.

• Utilize tools to enhance proposal efficiency and quality.

• Participate in knowledge sharing, certifications, and technical training initiatives.

Requirements:

• Relevant education in a technical field.

• Experience in presales, solutions engineering, or technical consulting within cloud or IT services.

• Strong understanding of cloud platforms (experience with AWS preferred; familiarity with Azure or GCP is advantageous).

• Proven ability to convert business needs into effective technical solutions.

• Experience in proposal writing, costing, and solution design.

• Excellent communication and presentation skills.

• Capacity to thrive in a fast-paced, sales-oriented environment.

• Preferred: AWS certifications (e.g., Solutions Architect, Cloud Operations).

• Experience with managed service providers, cloud migration, or managed services is beneficial.

• Exposure to security, monitoring, or observability solutions is a plus.

Interested candidate who wish to apply for the advertised position, please click “Apply”. We regret that only shortlisted candidates will be notified 

EA License No.: 01C4394 (PERSOL Singapore Pte Ltd) 

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolsingapore.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy. 

Job Description

• Industry/ Organization Type: Waste Management
• Position Title: Chemical Engineer (Material Planning)
• Working Location: Tuas (Company transport provided)
• Working Hours: 5 days (Mon - Fri, 8.00am - 5.00pm)
• Salary Package: Basic salary up to $3,800 + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Supervise and manage repacking, containment, ICW operations, and maintenance activities
• Monitor the safe process flow and backlog levels of TIW waste
• Ensure staff are trained according to the On-the-Job Training program and follow safe work procedures and SOPs
• Coordinate with operations, sales, and customer service teams to maintain high service quality
• Track containment purchase budgets and promote recycling of used containment to reduce costs
• Perform daily inspections of operations, check plant 5S and TPM activities, and monitor safety, equipment, and machinery
• Lead daily safety toolbox meetings and ensure personal protective equipment (PPE) is adequate for all staff
• Review existing procedures and workflows to improve efficiency and throughput
• Implement continuous improvement and modification plans for optimal operations
• Collaborate with lab chemists to evaluate and develop new treatment methods and procedures for new or unknown wastes, and report on operation costs
• Ensure compliance with EHS standards and support continual improvement of ISO 45001
• Prepare and analyze daily and monthly operational records and reports, address any issues, and follow up with relevant departments
• Compile annual operation and maintenance budgets for approval and monitor expenditures
• Work with operations and engineering teams to develop and implement preventive maintenance schedules
• Conduct regular training for staff on safe waste handling, MSDS, PPE, and risk assessment
• Activate the emergency response team and respond to spills or fire incidents as needed; work with the EHS department to ensure proper emergency preparedness and conduct regular drills

APPLY NOW!!!

• Degree in Chemical Engineering or related discipline
• 2 years of relevant experience

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #75663 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Responsibilities:

• Design, develop, and implement engineering solutions and technical projects.
• Conduct testing, troubleshooting, and performance evaluations of systems and equipment.
• Prepare technical reports, documentation, and project specifications.
• Coordinate with internal teams, contractors, and clients to ensure project requirements are met.
• Monitor project progress and ensure compliance with quality, safety, and regulatory standards.
• Analyze technical issues and recommend effective corrective actions.
• Provide technical support and guidance during project execution and maintenance activities.
• Assist in continuous improvement initiatives to enhance operational efficiency and productivity.

Job Requirements:

• Bachelor's Degree in Engineering or a related field.
• Relevant working experience in engineering, technical support, or project management is preferred.
• Strong analytical and problem-solving skills.
• Good communication and interpersonal skills.
• Proficient in Microsoft Office applications and relevant engineering software.
• Ability to work independently and as part of a team.

Responsibilities

• Coordinate with clients to supervise the work to ensure that the quality and schedule of the work are adhered to base on laws and regulations.
• Ability to understand the design objectives, systems and budgets of projects.
• Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them.
• Check and ensure the equipment and material offered in compliance with the specification and drawings.
• Prepare weekly work schedules, and documents.
• Ensure proper execution of the temporary works as planned.
• Control and supervise workmen and subcontractors to make sure standards of building performance, quality, time and cost schedules, and safety are complied with.
• Oversee and be overall responsible for works carried out by junior supervisors assigned under his/her care.
• Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors.
• Prepare progress reports to consultants and owners.
• Any ad-hoc project to be assigned.

Requirements

• Possess at least a Degree / Diploma in Mechanical Engineering or equivalent.
• Must have minimum 3-5 years of M&E working experience in ACMV/ HVAC, Service and Maintenance of Air-Con
• Strong knowledge of M&E details, working drawings and local construction practices
• Conversant with local codes and regulations
• Is a good team player and is analytical and a problem solver.
• Timely submission
• Strong interpersonal skills, ability to develop relationships and communicate with all levels of management
• Proficient Microsoft Office and other IT software

Staff Benefits

1. AWS
2. Annual leave 17 days, up to a maximum of 21 days
3. Transportation reimbursement claims (2 ways from home to office/site)
4. VB – subjective
5. Medical/Dental benefits
6. Insurance – Hospital & Surgery, Personal Accident and Term Life
7. Annual heath screening up to $200
8. Mobile Claims up to $100

Working hour: 8.30am to 5.30pm (5 days’ work week)