Total 4,771 Engineering job vacancies

• Ensure the Contractor is delivering high-quality work and maintaining good safety practices in accordance with statutory requirements.
• Attend all meetings related to the project including site, progress, variation, coordination, QAQC etc
• Provide ongoing supervision for the construction of civil and structural works as needed, ensuring compliance with the project specifications, construction drawings, and the Building Control Act and Regulations.
• Carry out supervision and inspection C&S, M&E and geotechnical works including but not limited to concreting, pavement, drainage, compaction, curing of concrete, formwork, re-props and removal of props, quality & erection of precast components and steel works.
• Manage and supervise the Resident Technical Officers under his charge.
• Coordinate with safety team and provide overview of WASH and aerodrome safety management systems and implementation of safe working practices on site.
• Ensure all construction works will not impact or affect the operations of the client.
• Ensure client’s emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• Verify all reports and claims relating to C&S, M&E and geotechnical works submitted by the contractors.
• Inspect the quality of work and materials delivered to the site, take corrective actions for any non-compliance, and report any materials that do not conform to the specifications to the OIC.
• Verify reports and claims submitted by the main contractors and other ancillary contractors.
• Resolve main contractors’ queries and coordinate the works onsite.
• Adhere to the shift duty roster assigned.
• Undertake any other duties including administrative tasks related to the project as and when instructed by the SRE, OIC, or the Client.

Requirements:

• Min 8 years of civil engineering experience of which at least 3 years shall be in supervision of

1. major construction works deep excavation, drainage, pipe jacking, ground improvement, flexible/rigid aircraft pavement, supervising & installation of monitoring instruments and collating of monitoring data.

2. Viaduct, road/expressway works, geotechnical and deep excavation works

• Degree in Civil Engineering recognized by PEB.
• Accredited as a RE with IES
• Able to perform shift work.
• Must have Airport flexible and rigid pavement experience for ariport project

Job Description

• Industry/ Organization Type: Construction
• Position Title: QAQC Engineer
• Working Location: Jurong/Islandwide
• Working Hours: 5.5 days (Mon - Fri 8.00am - 6.00pm; Sat 8.00am - 12.00pm)
• Salary Package: Basic salary up to $6,000 + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Experience in auditing
• Familiar with Architectural and Structural trade
• Conduct pre-inspection of work prior to joint inspection with BCA
• Prepare request for inspection for the project
• Compile and submit QAQC documents or records to the client
• Liaise with the client in any issues concerning quality control of the project
• Review and inspect all inspection reports for compliance

APPLY NOW!!!

• Diploma / Degree in Quality Assurance Engineering or other related field
• Minimum 3 years of relevant experience in a QAQC role within the building construction industry
• CONQUAS Manager Certificate

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #81473 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

Purpose of the role

To conduct maintenance activities to ensure high level of operability and reliability of M&E systems in Mediacorp Campus.

Scope of the role

• Attend and resolve daily operational matters with regard to M&E systems and liaise with Estate Management for areas that required interface
• To perform standby duties outside office hours to support servicing work and continuity of services at major events and / or "live" transmission of critical programmes
• Able to interpret single line diagram, control schematic and perform trouble shooting and hands on for minor repair
• Stay contactable 24 x 7 for prompt attention to critical abnormalities

Responsibilities

• Oversee and manage the execution of electrical project and maintenance works (UPS, generators, HT and LT switchgears, transformers, battery chargers, etc) on-site
• Coordinate with consultants, contractors and suppliers to ensure timely completion of works
• Prepare tender documents for maintenance contracts and project works
• Responds to BMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty if required
• Technical supervision of the operation, maintenance and repair of all mission critical equipment and systems supporting 24x7 activities to achieve 100% uptime
• Maintain compliance with local workplace safety & health (WSH) standards and local codes
• Provide guidance to junior engineers in the electrical team

• Diploma / Degree in Electrical Engineering or equivalent with minimum 5 to 8 years' relevant experience
• Strong knowledge and hands-on experience in power monitoring and control systems
• Proficiency in the operation and maintenance of generators and UPS systems
• Familiarity with lighting systems and their design, installation, and troubleshooting
• In-depth understanding of high-voltage and low-voltage switchgears

Job Description

1. Scenario-Driven Application DevelopmentDeeply understand enterprise business scenarios, identify core pain points, and translate them into technical solutions. You will lead the design and development of scenario-specific AI applications, such as intelligent risk control systems, data insight assistants, and more.

2. Understanding Core Architectures of AI Applications

Develop a solid understanding of the following AI application architectural components:

- Conversational & Task Frameworks: Build LLM-based conversational engines and agent frameworks capable of autonomously executing complex data tasks.

- RAG Engine Optimization: Design and implement efficient, accurate Retrieval-Augmented Generation (RAG) systems with deep integration of structured and unstructured data.

- Data-Driven Insight Tools: Develop intelligent analysis tools that automatically detect data patterns, anomalies, and trends.

3. Engineering Excellence & ProductizationDrive the process from technology selection and PoC development to full productization. Work closely with product, algorithm, and platform teams to transform technical vision into reliable, user-delighting products.

Requirements
- Strong Computer Science Fundamentals: Solid understanding of data structures, algorithms, operating systems, and networks. Proficient in at least one mainstream programming language (Python/Java/C++/Go).

- Experience in Combining Data & AI: Knowledge of machine learning or LLM fundamentals, plus hands-on experience integrating them with modern data tech stacks (e.g., Spark, Flink, Trino, Doris).

- Understanding of the AI Application Tech Stack: Familiarity with at least two of the following, with hands-on implementation experience:

- LLM application development, including prompt engineering and fine-tuning

- Search systems (ElasticSearch, Vector DBs) and RAG architectures

- Agent frameworks (LangChain, LlamaIndex) or custom task-planning engines

- Product & User-Centric Mindset: Passionate about creating user value. Able to zoom out from technical implementation and shape product experience from the user’s perspective. Measure technical success by product outcomes.

- Learning & Communication Skills: Ability to learn continuously in a fast-evolving field. Excellent communication skills to articulate complex technical concepts and collaborate across teams.

Nice-to-Have

- Proficiency in both Chinese and English

- AI application development experience in industries such as finance, insurance, or retail

- Experience with MLOps or DataOps, including model deployment, monitoring, and iteration- Contributions to open

-source communities or active technical blogging

Company Details

Our client is looking for an electrical engineer to embark on a major project that they are organising soon!

Job Description

• Perform electrical power system analysis studies including: Relay Coordination Study, Fault Level Study, Arc Flash study using ETAP software
• Perform design calculations including : cable sizing, voltage drop calculation as per code requirements and local regulations and go through with PE
• Preparation of quotation and follow up to secure purchase orders
• Consult and discuss with relevant authorities for planning and designing of power stations
• Conduct Site visits

Requirements

• Bachelor's degree in electrical or Power Engineering only
• Fresh graduates or candidates with minimal experience are welcome to apply
• Good interpersonal and communication skill
• Team player & Independent
• Having your own transport would be a plus as well

Project Construction, CQV and Startup Phase:

• Support installation, commissioning, equipment start-up activities, and execution of FAT/SAT and IOQ.
• Lead or support commissioning test, punch list closures, deviation/variations resolutions, and change controls related to filling equipment.
• Support for start-up batches, technical troubleshooting, and first-of-a-kind process runs.
• Act as key contact with equipment vendors, contractors, and service providers.
• Lead or support technical clarifications, engineering changes, and ensure documentation completion.

Operational Phase:

• Responsible for full lifecycle management of filling equipment:
• Troubleshoot technical issues during equipment operation, optimize efficiency of existing packaging production lines, and reduce failure rates.
• Document Breakdown Analysis (BDA) and lessons learned for equipment-related problems.
• Develop and optimize preventive maintenance and predictive maintenance plans to ensure equipment reliability.
• Prioritize spare parts classification and establish rational inventory levels for critical components.
• Act as the SME for filling equipment, create SME training programs, and coaching technician
• Collaborate with production and quality departments to ensure equipment meets process requirements and relevant regulatory standards.
• Continuously identify and eliminate potential audit risks to achieve audit readiness as a routine practice.
• Provide technical support during internal audits, FDA/EMA/HSA inspections, and client audits.
• Lead or support deviation investigations, CAPA development, change control, periodic reviews, and risk assessments (HAZOP, FMEA, CMMS updates).
• Ensure timely and accurate updates of system documentation (SOPs, Maximo job plans, equipment files).

Role Overview:

A Cloud DevOps Engineer with strong experience in AWS, Terraform, and CI/CD pipelines. The ideal candidate will work on cloud infrastructure automation, workflow orchestration, and deployment pipelines, ensuring efficient and secure cloud operations.

Key Responsibilities:

* Design, implement, and manage AWS cloud infrastructure using Terraform.

* Develop and maintain CI/CD pipelines for seamless deployment and automation.

* Author playbooks, scripts, and workflows for infrastructure and application orchestration.

* Ensure compliance and security standards, particularly in Government Commercial Cloud (GCC & GCC+), and SHIP-HAT tools.

* Utilize Jira and automated testing tools to track, manage, and improve deployment processes.

* Collaborate with development teams to enhance Cloud DevOps practices.

Requirements:

* Strong hands-on experience with AWS and Terraform.

* Solid understanding of CI/CD methodologies and best practices.

* Experience with workflow orchestration, scripting, and automation pipelines.

* Practical knowledge of Jira and automated testing frameworks.

* Experience working in Government cloud environments (GCC, GCC+ preferred) and familiarity with SHIP-HAT tools.

* Proven expertise in Cloud DevOps and modern infrastructure management.

Preferred Qualifications:

* Certifications in AWS, Terraform, or DevOps methodologies.

* Experience with security and compliance frameworks in regulated cloud environments.

Responsibilities:

• Perform preventive and corrective maintenance at client’s location
• Troubleshoot Windows, AIX Servers on system and interfacing faults
• Respond promptly to breakdowns to minimise downtime
• Plan and execute maintenance schedules and inspections
• Maintain accurate maintenance records and reports
• Ensure compliance with safety, health, and environmental regulations
• Coordinate with contractors and vendors for repairs and servicing
• Support installation, testing, and commissioning of new equipment
• Recommend improvements to enhance equipment reliability and efficiency

Requirements:

• Diploma or Degree in Electrical, Electronics or Information System Engineering with 2–3 years of relevant maintenance experience in IT /Data Centre environment
• Strong knowledge of IT infrastructure and network systems
• Ability to read technical drawings and manuals
• Familiarity with preventive maintenance practices
• Willingness to be on scheduled 24 hours standby duty and on-call duty
• Knowledge of Windows and AIX servers
• Hands-on troubleshooting skills
• Good teamwork and communication skills

Shortlisted candidates will be offered a 1 Year agency contract employment.

License No : 12C6060

The Managed Services Cross TechnologyEngineer (L2/L3) – Systems Automation is a developing or seasoned engineeringrole, responsible for providing a managed service to clients to ensure thattheir IT infrastructure and systems remain operational.

Through the proactive monitoring,identifying, investigating, and resolving of technical incidents and problems,the Managed Services Cross Technology Engineer (L2/L3) is able to restoreservice to clients.

This role is the core moderninfrastructure engineer automating the entire system delivery and operationslifecycle. The primary objective of this role is to proactively work onautomation aspects of work focusing on Systems relating to the operations. Alsoto work on client requests or tickets and apply technical/process knowledge toresolve them without breaching service level agreement (SLA).

The Managed Services Cross TechnologyEngineer (L2/L3) focuses on automation, infrastructure management, continuousdelivery, and system reliability. Also as a second-line support for incidentsand requests with a medium level of complexity and focusses across two or moretechnology domains - Cloud, Security, Networking, Applications and / orCollaboration etc.

This role may also contribute to /support on project work as and when required.

Key Responsibilities:

·        Automate the continuous integration, delivery, and deployment(CI/CD) pipelines (e.g., using Jenkins, GitLab CI).

·        Manageinfrastructure provisioning using Infrastructure as Code (IaC) toolslike Terraform across cloud platforms.

·        Orchestrate andmanage application deployment using Docker and Kubernetes (K8s).

·        Implementconfiguration management (e.g., Ansible) for server hardening, patching,and maintaining system state.

·        Design andmaintain robust Observability solutions (monitoring, logging, tracing)for production systems.

·        Ensure system reliability,scalability, and performance through automation and proactive tuning.

·        Develop automationscripts (e.g., Python, Bash) to reduce manual operational toil.

• Proactively monitors the work queues.
• Performs operational tasks to resolve all incidents/requests in a timely manner and within the agreed SLA.
• Updates tickets with resolution tasks performed.
• Identifies, investigates, analyses issues and errors prior to or when they occur, and logs all such incidents in a timely manner.
• Captures all required and relevant information for immediate resolution.
• Provides second level support to all incidents, requests and identifies the root cause of incidents and problems.
• Communicates with other teams and clients for extending support.
• Executes changes with clear identification of risks and mitigation plans to be captured into the change record.
• Follows the shift handover process highlighting any key tickets to be focussed on along with a handover of upcoming critical tasks to be carried out in the next shift.
• Escalates all tickets to seek the right focus from CoE and other teams, if needed continue the escalations to management.
• Works with automation teams for effort optimization and automating routine tasks.
• Ability to work across various other resolver group (internal and external) like Service Provider, TAC, etc.
• Identifies problems and errors before they impact a client’s service.
• Provides Assistance to L1 Engineers for better initial triage or troubleshooting.
• Leads and manages all initial client escalation for operational issues.
• Contributes to the change management process by logging all change requests with complete details for standard and non-standard including patching and any other changes to Configuration Items.
• Ensures all changes are carried out with proper change approvals.
• Plans and executes approved maintenance activities.
• Audits and analyses incident and request tickets for quality and recommends improvements with updates to knowledge articles.
• Produces trend analysis reports for identifying tasks for automation, leading to a reduction in tickets and optimization of effort.
• May also contribute to / support on project work as and when required.
• May work on implementing and delivering disaster recovery functions and tests.
• Performs any other related task as required.

Knowledge and Attributes:

• Ability to communicate and work across different cultures and social groups.
• Ability to plan activities and projects well in advance, and takes into account possible changing circumstances.
• Ability to maintain a positive outlook at work.
• Ability to work well in a pressurized environment.
• Ability to work hard and put in longer hours when it is necessary.
• Ability to apply active listening techniques such as paraphrasing the message to confirm understanding, probing for further relevant information, and refraining from interrupting.
• Ability to adapt to changing circumstances.
• Ability to place clients at the forefront of all interactions, understanding their requirements, and creating a positive client experience throughout the total client journey.

Certifications and tools:

• Certifications relevant to the services provided (certifications carry additional weightage on a candidate’s qualification for the role).
• Relevant certifications include (but not limited to) -
• Microsoft Certified: Azure Administrator Associate
• AWS Certified: Solutions Architect Associate
• Veeam Certified Engineer
• VMware certified Professional: DATA Centre Virtualization

·        Git, GitHub,GitLab CI/CD, Jenkins, GitHub Actions

·        Terraform

·        Ansible

·        Docker

·        Kubernetes(K8s)

·        Helm

·        Chef

·        Puppet

·        AWSCloudFormation

·        Prometheus

·        Grafana

·        ELK Stack(Elasticsearch, Logstash, Kibana)

·        Datadog

·        Splunk

·        New Relic

·        HashiCorpVault (Secrets Management)

·        Python

·        Bash

VMWare

vRealize Automation (vRA)

NetApp

NetApp Storage

VEEAM

Veeam Backup

Veeam Backup & Replication

Veeam Backup Enterprise Manager

VMWare

​​VMware Horizon (VDI)​

Servers routine operation

Virtual Desktop Pool

Virtual Application maintenance

DEM configuration.

Server Management

vCenter

ESXi

vSphere

CyberArk

Privileged Access Services

Enterprise Password Vault (EPV)

Central Policy Manager (CPM)

Privileged Session Manager (PSM)

Password Vault Web Access (PVWA)

HTML5 Gateway

PAReplicate

Microsoft

Windows Server Update Services (WSUS)

Active Directory (AD)

OpenGear

Console

Linux

Operating System

Ubuntu

RHL

Hitachi

Storage

HCP

HCPCS

SUSE

Container Management Platform

Rancher Prime

Container Security Platform

NeuVector Prime

Gitlab

CICD

Grafana

Dashboarding

OPSWAT

OPSWAT Central Management

RSA

Authentication Manager (AM)

RSA SecurID Token

Solarwinds

Enterprise Monitoring Services

Network Performance Monitor (NPM) 

Network Configuration Management (NCM) 

Server and Application Monitor (SAM) 

Additional Polling Engine (APE)

Server Configuration Monitor (SCM)

Server and Application Monitor (SAM)

Storage Resource Monitor (SRM)

Splunk

Splunk Enterprise

Splunk Deployment Server

Splunk License Manager

Splunk Monitoring Console

Splunk Cluster Manager

Splunk Search Head

Splunk Heavy Forwarders

Tenable

​​Vulnerability Management Services​

Tenable Security Centre (SC)

Nessus Manager (NM)

Nessus Scanner (NS)

Trend Micro

​​Endpoint Protection Services​

Deep Security Manager 

Smart Protection Server 

About us:

Cyrus Technology started in 2005 with the vision to approach polymeric tooling design in unconventional methods and providing manufacturing solutions to exacting specifications for ultra-precision and complex moulding. We pride ourselves as a valued partner to our clients, offering expertise at every stage of the product design to manufacturing, to transform market opportunity ideas to a marketable product. With the progress we achieved so far, we aim to continue to push boundaries and overcome constraints to be a leader in the industry.

Your key responsibilities are as follows:

• To develop, document and support the build of high precision plastic injection tooling and molded parts for manufacturing.
• Support Program team during upfront new project quotation stage by providing accurate upfront tooling/product DFM that matches the right quality requirements.
• To meet customer for DFM and mold concept review to ensure customer’s technical requirements and concerns are addressed.
• Support Tooling Department by conducting internal tooling design and DFM reviews before tool launch.
• Support Production in areas like molding process optimization, implement manufacturing fixtures and automation for reliability and efficiency improvements.
• Support Quality Team in the design and fabrication of test/measurement fixtures.
• To coordinate mold trials, tooling and molded part troubleshooting and carry out necessary engineering changes to ensure parts can be produced smoothly with the required quality.

Your areas of knowledge and expertise that matter most for this role:

• Excellent technical analytical ability with strong interest for problem solving.
• Self-motivated team player with good interpersonal and communication skills.
• Past working experience or knowledge of Precision Tooling Design/Fabrication, Micro Plastic Injection Molding Process or Manufacturing Process Engineering related field preferred.
• 3D CAD software skill for Siemens UG NX or PTC Creo 4.0 and above

Job Purpose

We are seeking a QA/QC Engineer to support and implement quality assurance and quality control activities across onshore fabrication and offshore installation works. The role ensures compliance with project specifications, international standards, and regulatory requirements throughout the EPCC project lifecycle.

Key Responsibilities

• Support the implementation and maintenance of the Quality Management System (QMS) in accordance with ISO 9001 and project requirements.
• Prepare and review Project Quality Plans (PQP), Inspection & Test Plans (ITPs), and quality procedures.
• Perform and coordinate QA/QC activities across engineering, procurement, fabrication, construction, installation, and commissioning phases.
• Ensure inspections and tests are carried out in accordance with approved ITPs and relevant standards.
• Monitor the quality of welding, NDT, piping, structural, mechanical, and coating works.
• Raise and track Non-Conformance Reports (NCRs) and assist in root cause analysis and corrective/preventive actions.
• Coordinate with inspectors, subcontractors, vendors, and third-party inspection agencies.
• Verify material certifications, inspection records, and ensure proper material traceability.
• Maintain quality records, reports, and documentation for project handover.
• Participate in internal and external audits and ensure compliance with applicable codes and standards (API, ASME, AWS, ISO, NACE, DNV).
• Support continuous improvement initiatives and promote quality awareness across project teams.

Requirements

• Bachelor’s Degree in Engineering (Mechanical, Metallurgical, Welding, or related discipline).
• Minimum 5–8 years of QA/QC experience in the oil & gas industry.
• Experience in onshore fabrication and/or offshore installation projects.
• Good knowledge of international standards (API, ASME, AWS, ISO, NACE, DNV).
• Hands-on experience in welding, NDT, piping, structural, or coating works.
• Familiarity with quality documentation, ITPs, and inspection processes.
• ISO 9001 Internal Auditor or relevant certifications (CSWIP / AWS / NACE preferred).
• Strong coordination, communication, and problem-solving skills.

We are seeking a Vision AI Engineer to support the development and deployment of computer vision solutions within robotics and manufacturing automation environments. This role focuses on dataset preparation, annotation workflows, and model training support to enable high-quality AI model performance.

Key Responsibilities:

• Perform image and video annotation for computer vision applications (e.g., object detection, classification, segmentation) using industry-standard annotation tools
• Prepare, curate, and validate datasets for training, testing, and evaluation of computer vision models
• Execute and support model training and re-training workflows using AI/ML platforms and third-party software tools
• Collaborate with engineering and automation teams to understand model requirements and translate them into data preparation pipelines
• Support robotics and humanoid automation initiatives by enabling AI model training workflows for real-world manufacturing environments
• Assist in data collection activities (image, video, and sensor data) in operational or production settings
• Conduct data quality assurance to ensure datasets meet accuracy, consistency, and completeness standards
• Maintain proper dataset versioning, annotation tracking, and documentation for traceability and reproducibility
• Document annotation guidelines, data workflows, and standard operating procedures (SOPs)
• Support proof-of-concept (POC) and pilot projects by ensuring timely availability of training datasets and outputs
• Ensure compliance with internal data governance, security, and operational standards

Roles & responsibilities:

1. Coordination with Construction team/ Design Consultant/PE/construction subcontractor, etc. for Detail Design Development.

2. Carryout detailed analysis and design of civil, structural, and geotechnical works.

3. Prepare design calculation reports and structural drawings for authorities' submissions.

4. Planning relevant temporary civil structure, plan & section required for the Traffic diversion, such as Drain diversion, Retaining wall, shop drawing development.

5. Review and planning for ERSS system for Underground structure using Diaphragm wall such as KP, Decking, Strutting, decking, etc.

6. Check/Rectification of all the structural drawing/ shop drawing if required.

Requirements and relevant experience are as below:

1. Bachelor’s / Master’s Degree of Civil Engineering or close discipline from a recognized Institution.

2. Strong engineering fundamental and analytical skills in geotechnical and structural analysis and design works is an advantage.

3. Good knowledge of the application of design and drafting software.

4. Minimum 5 years of experience in Civil and Structural Engineering especially for LTA Project.

5. Be well-aware of Traffic Diversion, Temp. Drain Diversion, and authority approval procedure.

6. Be well-aware of Underground Structure/Construction Sequences and related civil design works.

7. Be well-aware of Eurocode, LTA CDC, and relevant design specification/standards.

* Candidates who has experience as CS engineer (Design) in D&B contractor side would be an advantage.

* Interested applicants are required to submit their detailed CV and state their current and expected salary.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is hiring for Infrastructure Engineer

Internal Code: A26112

You will work in Singapore Government Agencies

This is a fixed term contract role. The engagement is 1 year.

What will you do?

• You will be responsible for designing, deploying, and optimizing cloud infrastructure solutions to ensure security, performance, and cost-efficiency. You will work with cloud native technologies, automate infrastructure deployment, and ensure system resilience through high availability and disaster recovery strategies.
• Design, deploy, and maintain cloud infrastructure and services using Infrastructure as Code (IaC) tools such as Terraform and AWS CloudFormation.
• Implement and manage CI/CD pipelines using 3rd party or native cloud tools and services to streamline deployment and automation processes.
• Monitor and troubleshoot cloud environments to ensure high availability, disaster recovery, and optimal performance.
• Ensure security best practices and compliance with industry standards by managing IAM policies, encryption, and network security controls.
• Configure and manage cloud networking, optimize traffic routing, and enhance connectivity solutions.

What are we looking for?

• A degree in Computer Science, Information Technology, Engineering, or a related field.
• At least 5 years’ experience in designing, deploying, and managing cloud infrastructure and services on AWS or other cloud platforms.
• Strong knowledge of Infrastructure as Code (Terraform, CloudFormation) and cloud automation strategies.
• Familiarity with networking concepts, cloud security best practices, and compliance frameworks.
• Experience with monitoring and troubleshooting cloud environments to ensure reliability and scalability.
• Ability to work in a fast-paced environment and collaborate with cross-functional teams to support cloud infrastructure needs.

What do we offer in return?

• Fun working environment
• Employee Wellness Program
• To work in Singapore Government Agencies projects
• We provide structured development framework and growth opportunities. (We are a “SHRI 2025 Gold winner” in “Learning & Development; Coaching & Mentoring”)

Why you'll love working with us?

If you are looking for opportunities to collaborate with leading industry experts and be surrounded by highly motivated and talented peers, we welcome you to join us. We provide all employees with equal opportunities to grow and develop with us. We believe your success is our success.

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice () to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is hiring for Full Stack Engineer

Internal Code: A26113

You will work in Singapore Government Agencies

This is a fixed term contract role.

What will you do?

• Designed and develop new applications features and services based on business requirements
• Build backend services and APIs using Node.js / Next.js server-side capabilities
• Design and manage relational database schemas and data access logic
• Implement secure authentication and authorization, including role-based access control
• Implement document / file handling features with appropriate access controls
• Support system testing, UAT, bug fixing and production releases
• Collaborate with UI/UX designer to build a responsive and user-friendly interface

What are we looking for?

• 2+ years of professional software development experience
• Strong hands-on experience in full-stack web development
• Proficient with React, Next.js, TypeScript, Node.js, PostgreSQL
• Solid understanding of software development lifecycle (SDLC) and agile methodologies
• Skilled in analyzing complex requirements and designing test plans that mitigate risk
• Familiarity with backend and frontend technologies

Good to have:

• Familiarity with cloud platforms (AWS, GCP, Azure) and containerization (Docker, Kubernetes)
• Experience with continuous integration/continuous deployment (CI/CD) pipelines and test infrastructure
• Experience with ORM technologies (Prisma)
• Familiarity with ETL pipeline with AWS glue and redshift

What do we offer in return?

• Fun working environment
• Employee Wellness Program
• To work in Singapore Government Agencies projects
• We provide structured development framework and growth opportunities. (We are a “SHRI 2025 Gold winner” in “Learning & Development; Coaching & Mentoring”)

Why you'll love working with us?

If you are looking for opportunities to collaborate with leading industry experts and be surrounded by highly motivated and talented peers, we welcome you to join us. We provide all employees with equal opportunities to grow and develop with us. We believe your success is our success.

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice () to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

• Minimum of 5 years of experience in the IT industry, with strong exposure to cloud and infrastructure engineering.
• Bachelor’s degree in Computer Science, Engineering, or related field (preferred).
• Microsoft Certification: AZ-104 (Azure Administrator) or AZ‑305 (Azure Solutions Architect Expert)

Preferred Skills

AzureCore Skills

• Hands‑on experience with Microsoft Azure, including:
• Compute, Networking, Storage services
• Identity and Access Management
• Strong understanding of Azure architecture and networking concepts

Automation& Scripting

• Infrastructure as Code (ARM / Bicep / Terraform)
• Scripting and automation using:
• PowerShell
• Azure CLI
• Python or Bash

Operations& Reliability

• Cloud monitoring and logging
• Incident and problem management
• High availability, backup, and disaster recovery concepts

Nice‑to‑HaveSkills

• Experience in regulated or enterprise environments (e.g. banking, financial services)
• Familiarity with CI/CD pipelines (Azure DevOps, GitHub Actions)
• Container or platform exposure:
• Docker
• AKS (Azure Kubernetes Service)
• Cloud migration tools (Azure Migrate)
• Knowledge of the Azure Well‑Architected Framework

A) Job Summary:

Assist the M&E Manager in coordinating M&E specific works on site.

(B) Essential Job Functions:

The M&E Engineer is responsible, but not limited to, the following:

Quality

• Control site progress & installation quality as per approved Shop Drawings, Technical Submissions, and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion.
• Appraisal for works/products compliance to Specifications/Requirements and selection recommendation.
• Responsible for M&E drawing coordination and production of CSD and individual service drawings quality.
• Responsible for conducting QA/QC inspection, managing RE, RTO, and responsible for clearing QA/QC inspections to meet with construction schedule.
• Provide and maintain all site inspection records & T&C records up to date.

Procurement, Contract, VOs, EOTs

• Responsible for variation order cost collection, cost verification of the VO works, and making necessary recommendations for VO prices.
• To check, evaluate, and confirm work done and material supply quantity status for the purpose of M&E sub-contractor/NSC vendors' progress payments including instruction on progress substantiation document preparation by sub-contractors and vendors.

Safety

• Responsible for site implementation of safety standards to comply with IMS safe work methods.
• Responsible for attendance at daily site coordination meetings and providing detailed coordination with subcontractors.

(C) Minimum Qualifications:

• A Bachelor’s Degree in Mechanical or Electrical Engineering.
• At least three years of experience working with a Main Contractor.

(D) Personality:

• Good organizational and interpersonal skills.

(E) Knowledge/Skills/Abilities:

• Good technical knowledge in mechanical & electrical trades.
• Good knowledge of Local Code/Regulation Knowledge pertaining to M&E services, building construction, and safety.
• Time management skills with exceptional attention to detail and ability to manage particular tasks put in his charge.
• Good verbal and written communication skills.
• Ability to analyze and synthesize complex issues quickly

Responsibilities:

• Infrastructure & Automation: Architect, deploy, and maintain scalable cloud infrastructure using Infrastructure as Code (IaC) methodologies.
• CI/CD Pipelines: Develop and optimize automated pipelines for testing, deployment, and release management.
• Monitoring & Reliability: Implement observability frameworks, including monitoring, logging, and alerting, to ensure system performance and uptime.
• Security & Compliance: Apply cloud security best practices, manage access controls, and maintain compliance across all environments.
• Cross-Functional Collaboration: Work closely with backend, frontend, and product teams to enable smooth deployments and reliable operations.
• Process Improvement & Mentorship: Enhance DevOps workflows, promote best practices, and mentor junior engineers.

Qualifications:

• 5+ years’ experience in DevOps or SRE, with strong skills in cloud platforms (AWS, GCP, Azure) and containerization (Docker, Kubernetes).
• Hands-on with Infrastructure as Code (Terraform, Ansible, Helm) and CI/CD tools (Jenkins, GitHub Actions, GitLab CI/CD, ArgoCD).
• Solid Linux administration, networking, and distributed systems knowledge.
• Experienced in monitoring and observability using Prometheus, Grafana, ELK/EFK, Datadog, etc.
• Skilled in automation and scripting (Python, Go, Bash) to improve system reliability and performance.
• Designs secure, scalable, fault-tolerant infrastructure with disaster recovery planning.
• Strong collaboration, ownership, and communication skills, able to mentor teams and convey technical concepts to technical and non-technical stakeholders.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd
EA License No: 20C0270
EA Personnel: Nyon Hock Sen (Aden)
EA Personnel Reg No: R24124070

An established Civil& Structural Engineering Consulting firm in Singapore requires the following position:

Senior Engineer

Responsibilities:

• Assist Qualified Person (QP) to develop the engineering design and analysis
• To work with or lead the team members, drafters and technical officers to complete the project within the timeline.
• To attend design meeting and site meetings with clients, PM and consultants from other disciplines.

Requirements:

• Possess degree in Civil/Structural (C&S) Engineering
• Preferably with minimum 5 years design experience in Civil & Structural consultancy firm
• Conversant with local codes and regulations
• Well experience in either in building projects or infrastructure works or Geotechnical design projects would be an advantage
• Able to work independently as well as in a team to meet tight project timeline

Interested applicants, please write-in with detailed resume, stating personal particulars, current &expected salaries, availability and experiences to hr@fongintl.com

Company Overview

PEC Civil Consultant Pte Ltd is a local medium-sized civil structural consulting firm engaged in residential, commercial, and industrial projects. We seek qualified individuals to join our team and contribute to diverse engineering solutions.

Job Summary

You will design and analyze temporary and permanent civil structures, coordinate project submissions with local authorities, and collaborate with clients and consultants to ensure technical compliance and project success.

Responsibilities

• Design temporary and permanent civil engineering works to meet project requirements
• Perform structural analysis and design of buildings to ensure safety and compliance
• Coordinate project documentation and submissions to local authorities during design and construction phases
• Liaise effectively with clients, consultants, and authorities to resolve technical issues and facilitate project progress
• Apply local codes of practice and authorities’ regulations to ensure compliance in all designs and submissions
• Utilize STAAD-Pro, PLAXIS, Prokon, and SAFE software to perform engineering analyses and design tasks

Required competencies and certifications

• Degree in Civil Engineering (Geotechnical or Structural)

Preferred competencies and qualifications

• 2 to 3 years of experience in civil engineering design
• Knowledge of Eurocode design standards
• Proficiency in STAAD-Pro, PLAXIS, Prokon, and SAFE software

Other Information

• Attractive remuneration will be offered to the right candidate

Role: IAM Operations Engineer

We are seeking an experienced Identity and Access Management (IAM) Operations Engineer to support and enhance our enterprise identity platform. This role focuses on the day-to-day operations, administration, and continuous improvement of IAM services across cloud and enterprise environments. The ideal candidate has strong hands-on experience with Microsoft Entra ID and AWS IAM Identity Center, and works closely with security, infrastructure, and application teams to ensure secure and seamless access for users.

Responsibilities:

Identity Platform Management

·       Operate, administer, and support enterprise IAM platforms, including Microsoft Entra ID and AWS IAM Identity Center

·       Support authentication and authorization mechanisms such as SSO, MFA, conditional access, and federation

·       Implement and maintain IAM policies, standards, and operational procedures

·       Integrate IAM solutions with cloud services, SaaS applications, and on-prem systems

·       Perform access reviews, audits, and compliance-related activities

·       Participate in IAM platform upgrades and enhancements during weekend maintenance window

User Support & Operations

·       Provide Level 2 / Level 3 support for incidents and service requests

·       Monitor system performance and infrastructure health to ensure availability and optimal operation

IT Service Management

·       Understands ITIL processes for Incident, Problem, Change Management

·       Create and update tickets with detailed documentation and resolution steps

·       Maintain SLAs and ensure timely ticket resolution

Documentation & Knowledge Management

·       Create and maintain technical documentation, knowledge articles, and standard operating procedures (SOPs)

·       Maintain runbooks for common operational tasks

Required skills and qualifications

·       A degree in Computer Science, Information Technology, IT Security or a related field with at least 2-4 years of work experience

·       Atleast one year of hands-on experience in IAM or identity-related operations

·       Strong practical experience with:

a.     Microsoft Entra ID (Azure AD) – users, groups, conditional access, MFA, SSO, enterprise applications

b.     AWS IAM Identity Center – permission sets, account assignments, and federation

·       Solid understanding of identity concepts: authentication, authorization, RBAC, least privilege, federation

·       Experience with IAM-related protocols such as SAML 2.0, OAuth 2.0, OpenID Connect

·       Familiarity with cloud environments and security best practices

·       Strong troubleshooting and problem-solving skills

·       Ability to work effectively with cross-functional technical and business teams

·       Good documentation and communication skills

Preferred skills and qualifications:

·       Experience supporting hybrid identity environments (on-prem AD + cloud)

·       Relevant certifications e.g. Microsoft Certified: Identity and Access Administrator Associate

Responsibility involves:

• Analyze user requirements
• Write and test code, refining and rewriting it as necessary and communicate with any programmers involved in the project
• Research, design and evaluate new software programs
• Enhance existing programs by analyzing and identifying areas for modification
• Create technical reports
• Correcting software defects
• work closely with other staff, such as project managers, graphic artists, UX designers, other developers, sales, marketing, application and customer service professionals
• Consult clients and colleagues concerning the maintenance and performance of software systems
• Investigate new technologies
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Bachelor's degree or diploma in computer science or computer engineering or other related disciplines
• Proficiency in computer programming languages such as WPF, C#, JavaScript, and XML will be advantageous.
• Strong working knowledge of Microsoft Windows is a must along with extensive experience in software development and testing.

Weare seeking a highly skilled, hands-on Vulnerability Management Engineer whowill be responsible for identifying, assessing, and mitigating vulnerabilitiesin the organization’s IT infrastructure. You will conduct regular vulnerabilityscans, evaluate potential threats, and work closely with IT and security teamsto implement effective remediation strategies. This role is crucial inmaintaining the organization’s security posture and protecting critical assetsfrom cyber threats.  

Responsibilities:

Vulnerability Management

·       Managevulnerability scanners and agents. Monitor status, plugin update failures, andconnectivity issues

·       Designand tune scan policies to balance depth (thoroughness) with performance(network impact).

·       Triagenew vulnerabilities (CVEs) as they are released. Prioritize risks using CommonVulnerability Scoring System (CVSS) scores.

·       Ensureall systems remain compliant with security baselines, regulatory expectations,and internal security policies

·       Analysevulnerability reports and recommend actionable remediation steps

User Support & Operations

·       ProvideLevel 2 / Level 3 support for incidents and service requests

·       Workwith system owners, app support, developers, and infrastructure teams tocoordinate patch deployment during pre-approved weekend maintenance window andverify post-patch stability

IT Service Management

·       UnderstandsITIL processes for Incident, Problem, Change Management

·       Createand update tickets with detailed documentation and resolution steps

·       MaintainSLAs and ensure timely ticket resolution

Documentation & Knowledge Management

·       Createand maintain technical documentation, knowledge articles, and standardoperating procedures (SOPs)

·       Maintainrunbooks for common operational tasks

Required skills and qualifications:

·       Singaporeansonly

·       Degreein Computer Science, Computing, Electrical Engineering, IT or equivalent withat least 2-4 years’ experience in vulnerability management, system programming

·      Practicalexperience with vulnerability scanning tools (Tenable or Qualys or Rapid 7).

·      Abilityto interpret vulnerabilities across Windows Server, RHEL, and NetworkInfrastructure (e.g. Palo Alto)

·       Participate in 24/7 standby rotationto provide operational support

Preferred skills and qualifications:

·      Experience with scripting (PowerShell, Bash,Python) for automation

·      Experience with Dynatrace

·      Knowledge of cloud computing (Amazon WebServices preferred)

Please share your profile to shyam@aryan-solutions.com

Job Summary

Resorts World Sentosa is looking for an Assistant Manager, Mechanical Engineer to join the team to lead the reliability, safety, and engineering performance of rides and show equipment at Universal Studios Singapore. It oversees troubleshooting, maintenance strategies, and ride enhancement projects, ensuring compliance with safety standards while partnering with OEMs and technical teams to maintain optimal operations.

Job Responsibilities

• Lead the engineering validation, reliability centered maintenance analysis & configuration control of all amusement rides/show equipment

• Lead installation, key troubleshooting efforts and reliability improvements of amusement ride and show equipment, including mechanical components, structures, pneumatics, hydraulics, gas, etc

• Oversee major ride enhancement projects. From scope development to final approvals. Project Management experience will be an advantage.

• Support in development of effective maintenance regime to ensure the safety and reliability of ride and show attractions in the theme park.

• Responsible for testing of rides and shows to ensure compliance with requirements of local and overseas regulatory bodies.

• Prepare engineering reports and engineering drawings through use of CAD software (AutoCad/Solidworks) and mechanical analysis for effective evaluation of ride’s safety & reliability

• Main point of contact with OEMs for Safety & Reliability of Ride and Show

• Perform critical inspection and condition survey tasks to supplement routine scheduled inspections (by others)

• Support Engineering Change Process and Review of Service bulletins.

• Understand amusement ride safety regulations set by Building and Construction Authority (BCA)

Required Qualifications

• Degree in Mechanical Engineering (or related field)

• Minimum 5 years of experience in Mechanical / Manufacturing / Oil & Gas industry

Required Skills

• Proficiency in engineering analysis and use of 3D CAD tools - Autocad/Solidworks

• Prior experience of fabrication, machining and welding is an advantage

• Able to perform shifts including weekends & public holidays

• Applicant must be able to work at height and willing to take the rides from time to time to conduct quality checks for the rides

• Ability to work with diverse group of technical team members

Responsibilities

• Serve as the senior technical lead for business opportunities, leading technical presentations, solution design, and proof-of-concept activities.
• Partner with NPNs and key channel partners to ensure technical alignment and successful solution integration.
• Drive consistent delivery of technical assets (demos, architectures, reference designs) for customers in APAC.
• Assist customers/partners with evaluations, benchmarks, system configurations and installations.
• Collaborate closely with the R&D team to define product requirements and optimize usability.
• Participate in formulating sales strategies, and take ownership of all technical responsibilities for customer accounts.
• Demonstrate technical leadership and professional expertise in storage products, distributed storage architectures, file systems, as well as competing storage solutions in DAS, NAS and SAN fields.
• Design standardized architectural blueprints for replicable solutions for the sales team to deliver to customers.

Requirements

Lead technical presentations, POC; collaborate with partners; support APAC customers.

Work with R&D, build solution blueprints, lead APAC SE functions.

Ideal Background - 5+ years enterprise storage sales support; familiar with storage/AI/HPC; strong communication.

• 5+ years of experience supporting enterprise storage sales for large IT organizations.
• Positive mindset, proactive and strategic vision.
• Ability to work efficiently in unstructured & flexible working environments.
• Understanding of classic unstructured data applications, as well as next-generation analytics and AI frameworks.
• Experienced in preparing and delivering technical presentations on products and architectures to customers and internal trainees.
• Knowledge of high-performance computing, network infrastructure and enterprise security.
• Candidates with backgrounds in WEKA, Vast Data, DDN, IBM Spectrum Scale or Pure Storage are highly preferred.