Total 4,707 Engineering job vacancies

PLC/ SCADA Associate Engineer 

5 days, 8.30am to 5.50pm

Salary: $3500 +/- depending on experience

Location: Bedok, travelling to site required 

Job scope:

• Responsible for integration and implementation of both hardware and software engineering work
• Carry out proper planning, execution and supervision of the integration work and do QA technical checks throughout the project execution
• Handle application programme change management, hardware deployment management and documentation
• Implementation of PLC/SCADA project from concept to design and programming
• Interface with SCADA and PLC programming
• Meeting with clients, doing reports and documentation
• Perform troubleshoot independently

Requirements:

• Nitec/ Diploma in Electrical/Electronic or related discipline
• 1-2 years of experience or some knowledge in PLC and SCADA
• Site maintenance and travelling around SG for site maintenance is required
• Class 3/3A driving license is required to drive company van

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

YOUR NEW JOB

As a Network Security Resident Engineer, you’ll be embedded onsite to support and deliver Fortinet-based network & security solutions within a large BFSI enterprise environment.
You’ll handle design validation, deployment, optimisation, and troubleshooting across complex routing (BGP) & SD-WAN setups.
This is a 12-month contract role (renewable).
Deployed onsite to client premise, that might require standby/weekend support occasionally.

WHAT YOU’LL BE DOING

• Deploy, configure, and optimise Fortinet network security solutions (SD-WAN, firewall)
• Work on complex routing environments (BGP, OSPF, WAN architectures)
• Support solution design, validation, and implementation activities
• Build and maintain configuration templates and automation scripts (e.g. Jinja)
• Troubleshoot network and security issues, including escalations
• Perform testing, integration, and system verification
• Maintain technical documentation (design, configs, runbooks)
• Provide knowledge transfer and ongoing support to client teams

WHAT IS NEEDED FROM YOU

• Strong hands-on experience in network security &enterprise networking (7+ years)
• Deep expertise in routing protocols (BGP, OSPF) and WAN environments
• Strong experience with Fortinet technologies (FortiGate, FortiManager, SD-WAN)
• Experience with scripting/automation (e.g. Jinja, templating)
• Experience in design, deployment, and troubleshooting of network solutions
• Strong problem-solving and client-facing communication skills

WHAT WILL MAKE YOU STAND OUT

• Experience in large enterprise or BFSI environments
• Exposure to MPLS or complex multi-site network architectures
• Experience in managed services or vendor deployment roles
• Strong documentation and structured delivery approach

Project contract based (estimate project completion: 2027)

M&E Engineer

• Work Location: Changi, office at (Lavender area)

• Working days: 5.5 days 8am to 5pm, Alternate Saturday 8am to 5pm Full Day

• Salary: $3000 to $4000

• Degree in Mechanical or Electrical Engineering or equivalent

• Good technical knowledge in mechanical & electrical trades.

• Good knowledge of Local Code/Regulation Knowledge pertaining to M&E services, building construction, and safety.

Interested applicants can also send your resume to (Liwenpoh741#gmail.com) and allow our consultant to match you with our clients. No Charges will be incurred by Candidates for any service rendered.

WA ME 9735 4019 for more M&E Engineer role

Job scope

• Control site progress & installation quality as per approved Shop Drawings, Technical Submissions, and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion.

• Appraisal for works/products compliance to Specifications/Requirements and selection recommendation.

• Responsible for M&E drawing coordination and production of CSD and individual service drawings quality.

• Responsible for conducting QA/QC inspection, managing RE, RTO, and responsible for clearing QA/QC inspections to meet with construction schedule.

• Provide and maintain all site inspection records & T&C records up to date.

• Responsible for variation order cost collection, cost verification of the VO works, and making necessary recommendations for VO prices.

• To check, evaluate, and confirm work done and material supply quantity status for the purpose of M&E sub-contractor/NSC vendors' progress payments including instruction on progress substantiation document preparation by sub-contractors and vendors.

• Responsible for site implementation of safety standards to comply with IMS safe work methods.

• Responsible for attendance at daily site coordination meetings and providing detailed coordination with subcontractors.

POH LI WEN REG NO: R25136683

THE SUPREMEHR ADVISORY PTE LTD EA NO: 14C7279

Plan, design and administer contract/project of mechanical and electrical engineering works for building service including

• Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Electrical / Building Services Engineering.
• Minimum 5 years of relevant experience.
• Candidates with less than 5 years of experience may be considered for an entry-level, depending on their skills and qualifications.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

Responsibilities

1. Understand, plan and execute projects’ contractual & technical requirements and deliverables,

2. Responsible for all project operations, from project quotation preparation, engineering design to procurement, project kick off, project execution, site installation, site inspections, attend and minute internal & external meetings,

3. Prepare and submit Pre-condition site survey reports, material submittals, Work progress reports, project handover reports, COC, Billing and invoices,

4. Lead & coordinate with all internal departments, external parties such as consultants, relevant Authorities, vendors & suppliers etc,

5. Manage assigned project sites work schedule, budget, work safety compliance, project resources, tools, equipment, materials & consumables,

6. Provide technical support, effective training and coaching to assigned project teams,

7. Manage and maintain good and effective working relationship with clients and end users,

8. Manage & enforce effective work processes & safe work practices to enhance performance level and service excellence to customers

9. Motivate and manage cross-functional, multi-site teams on projects from inception to closure

10. Manage & enforce staff compliance to company’s code of conduct and disciplinary procedure,

11. Support Organizational transformation objectives & continuous improvement drives to meet/exceed company objectives and mission,

12. To support other work/project assignments by project manager

13. Oversee day to day operational matters and challenges.

Qualification and Requirement

1. Diploma/BS Degree in Mechanical, Electrical or Industrial Engineering with a minimum of 3-5 years in construction projects & Building maintenance/Operations/Engineering leadership with Strong technical knowledge of building & M&E systems will be advantageous,

2. High Level interpersonal and leadership skills,

3. Strong customer service, analytical, and interpersonal skills,

4. Excellent organizational, project management, and problem solving skills,

5. A proactive & positive person with a strong motivation to learn, self-starter, ability to handle multiple tasks and priorities,

6. A good team player yet able to deliver independent assignments as required,

7. High level of integrity, ownership and drive

You may email your CV to victoria_lau@pnhgrp.com or +65 8600 3908

• 5 Work Days, 8.30am-5.30pm / 9am-6pm 

• Office Near to Kaki Bukit MRT, Singapore 

• Medical Benefits Provided 

  Entitled to Yearly Bonus & Performance Bonus 
  

Job Requirements: 

1. Preferable Master's Degree in Computer Science, Applied Mathematics, Electrical Engineering, Pattern Recognition, Artificial Intelligence, Automatic Control, Operations Research, Biology, Physics / Quantum Computing, Neuroscience, Statistics or a related field. 

2. Familiar with common machine learning and deep learning algorithms and keeping track with the latest SOTA implementations. 

3. Strong programming skill in Python, C / C++, proficient in mathematical / statistical concepts and exceptional coding skills 

4. Hands-on experience with AI / ML frameworks be familiar such as Caffe, PyTorch, TensorFlow, MxNet etc. 

5. Have rich project experience in machine learning and deep learning, be familiar with common algorithm models, such as CNN, RNN, LSTM, Transformer, ViT, etc., and be able to improve and innovate models according to actual problems. 

6. Experience in familiar the design, parameter tuning and optimization methods of neural network models is a plus 

7. Experience in model compression and in the transplantation and optimization of deep learning forward inference on various platforms, including NPU / GPU / DSP / ARM on mobile platforms and CPU / GPU on server platforms is also a plus. 

8. Strong logical thinking and problem-solving ability, able to independently undertake the research and tackling of complex problems and team spirit are highly valued traits. 

Job Responsibilities: 

• Algorithm Development: Development and optimization of machine learning and deep learning algorithms to solve complex business problems. 

• Model Training and Evaluation: Participate in the construction and training of artificial intelligence models, including but not limited to neural networks, decision trees, etc., evaluate and optimize the models to improve their performance and accuracy. 

• Data Analysis and Preprocessing: Conduct data collection, cleaning, preprocessing and feature engineering, provide high-quality data for model training, and arrange and guide data labelers to carry out data labeling and other work. 

• Collaboration and Deployment: Collaborate with team members to integrate algorithm models into actual business systems, promote the implementation of projects, and realize the intelligent upgrading of products. 

• Research and Innovations: Stay up to date with the latest advancements in AI and ML technologies. Explore and deploy new technologies, drive innovations to create value to market needs, and enhance the company’s competitiveness. Audio and video algorithms for surveillance/monitoring applications which also include the research and implementation of algorithms involving target detection, feature extraction, tracking, and recognition. 

• Documentation and Reporting: Maintain comprehensive documentation of algorithms, experiments, and project workflows. Communicate results and findings to technical and non-technical stakeholders. 

Reolink, a leader in intelligent visual technology for homes and businesses, was founded in 2009 by a group of engineers with a strong commitment to and passion for smarter security solutions. 

Our Products are now trusted by millions of users across more than 110 countries and regions worldwide. Building on this trust, we continue expanding our presence and bringing our innovations to more markets around the globe. 

Reolink remains committed to delivering advanced, reliable, and user‑centric solutions that empower people to protect what matters most. 

Jobscope:

• Produce electrical designs that comply with specification, quality, and safety standards
• Ability to select appropriate electrical components and cables with due consideration given to size, layout, and cost
• Produce and revise electrical documentation and drawings
• Provide technical support to the Operations team during assembly and testing  
• Conduct troubleshooting and drive closure on equipment electrical-related matters
• Comply with Change Notice procedures concerning electrical parts replacement

Requirements:

• Degree in Electrical and Electronics Engineering
• More than 5 years of equipment electrical design experience
• Knowledge of stringent grounding requirements used in industrial control systems
• Electrical drafting knowledge using 2D CAD systems
• Good interpersonal skills
• Able to travel overseas for field support when required
• Must be prepared to work overtime when necessary

To apply, please visit www.gmprecruit.com

To learn more about this opportunity, please contact Fiona Koh | fiona.koh@gmprecruit.com

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Fiona Koh| Registration No: R11092398

Job Description

• Advanced proficiency in Python programming with a focus on writing clean, testable and efficient code
• DevOps & Containers: Proficient with Docker for containerization and working knowledge of Kubernetes
• (k8s) for orchestration
• Practical understanding of GPU architecture and cloud compute instances to optimize resource allocation for training and inference workloads
• MLOPS tools: hands on experience with MLflow (or similar tools like weights & biases) for experiment tracking and model registry
• Proven experience working with Large Language Models (LLMs)
  Good understanding of AI agents & agentic workflows, LLM orchestration frameworks and reasoning patterns
• Experience with data preprocessing, feature engineering, and model selection and evaluation techniques
• Hands-on experience with CI/CD pipelines (GitLab, Jenkins)
• Knowledge of statistical and mathematical concepts relevant to machine learning, such as probability linear algebra, and optimization
• Excellent problem-solving and debugging skills, with the ability to identify and resolve issues quickly and effectively
• Relevant work experience in machine learning, data science or a related field

Position: Project and Sales Support Mechanical Engineer
Salary: $3000-$3800
Working Day: Mon-Fri | Alt Sat
Working Hour: 8.30am-5.30pm | 8.30am-12.30pm
Working Location: Woodlands Link

Job Responsibilities:

• Understand and address customer's enquiries/requests for quotation (RFQs) with diligence.
• Gain knowledge and understanding of cooling water-related equipment including its proper operation.
• Attend various meetings including clarification meetings, “kick off” meetings, troubleshooting meetings and the likes together with our customer service section and /or customers, as and when required.
• Supervise contractors/sub-contractors regarding site project activities service is of utmost importance.
• Respond efficiently to issue onsite including troubleshooting, as and when the need arises.

Qualifications & Requirements:

• Diploma or Degree in Mechanical Engineering.
• Minimum valid Singapore Driving license Class 3 Computer Literate.
• Relevant experience in the Air -Conditioning & Refrigeration System will be an advantage.
• Project design and update of drawing using AutoCAD 2D software.

To Apply:

• You may email your resume to jj@alignrecruitment.com.sg for more information.
• Regret to inform that only shortlisted candidates will be contacted by our consultants.

Align Recruitment Pte Ltd (20C0253)
JJ Tan (Reg No. R23112681)

• Provide presales technical support by designing and recommending suitable technology solutions that address clients’ business and technical requirements.
• Work closely with the sales team to analyze customer needs and propose effective cybersecurity and networking solutions.
• Deliver product presentations and live demonstrations to customers, partners, and internal teams.
• Prepare technical proposals, solution architectures, and compliance matrices for tenders and project bids.

Requirements:

• Diploma in IT or equivalent
• At least 2 years of presales experience within the IT networking and cybersecurity domain.
• Experience with technical presentations, product demonstrations, and proof-of-concept deployments.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

This is a an opportunity to join one of the largest long-term projects for a government sector company. The job title is Systems Engineer. This role requires 24/7 support after work hours and on weekends. You will serve as the point of contact (POC) for the system used in the project such as Citrix or Wintel. Upon successful onboarding, you will undergo trainings on the said technologies.

Responsibilities:

• Assist in the implementation and optimisation of system.
• Gather and analyse user requirements to enhance system functionality.
• Collaborate with stakeholders to understand their needs and challenges for the project.
• Conduct testing and validation of new features and updates in the system.
• Develop user documentation and training materials for staff.
• Provide support and troubleshooting for system-related issues.Monitor system performance and suggest improvements.

Requirements:

• Degree in Computer Science, Computer Engineering or IT equivalent.
• Strong analytical and problem-solving skills.
• Excellent communication and interpersonal skills.
• Ability to work collaboratively in a team environment.
• Eagerness to learn and adapt to new technologies (Wintel / Citrix).
• Willingness to do 24/7 support after work hours and on weekends.

Morgan McKinley Pte Ltd

Cedric Ferreras

EA Licence No: 11C5502

EA Registration No. R1870889

Micron is a global leader in memory and storage solutions, enabling transformative technology that enriches life for all. With over 40 years of innovation, Micron plays a pivotal role in the data-driven economy, where memory and storage are strategic differentiators. We are committed to sustainability, employee well-being, and community support, and we foster a culture of inclusion, collaboration, and continuous improvement.  

Key responsibilities and duties include:   

Technology Development:  

• Develop and enable advanced package technology for various post-fab wafer finish and assembly processes  

• Focus on improving product quality, driving yield improvements, reducing costs, and enhancing productivity  

• Integrate semiconductors while partnering with process and product engineering teams  

Yield Improvement:  

• Achieve and improve yields through silicon package integration innovation, not limited to layout/design or process margin improvements  

• Collect and analyze data to provide actionable outcomes and decisions for layout, design, or integration flow changes  

• Work with Probe, Yield Analysis, Test, and Product Engineering teams to drive improvements  

Quality Improvement:  

• Ensure defense coverage through process, measurement, inspection, and testing  

• Establish correlations between defense mechanisms to identify improvement opportunities  

• Conduct continuous data analysis to establish advanced controls and identify improvement opportunities  

Collaboration and Coordination:  

• Work closely with internal and external stakeholders to build and execute technology development strategies aligned with organizational and business objectives  

• Work closely with various teams, including the PWF Engineering, Assembly Engineering, Front End Wafer Fab, Assembly/Test Engineering, Product Engineering, and Global Quality, to integrate manufacturing processes for optimal performance and quality control  

• Ensure smooth transition from new product development, qualification, small volume production to high volume production  

• Provide Process Of Record (POR) and Model Of Record (MOR) documentation for product transfer to production High Volume Manufacturing Fabrication facilities  

Job Requirements: 

• Bachelor’s or advanced degree in Engineering or Science is required 

• Strong analytical, logical, and critical thinking skills 

• Effective communicator, able to collaborate across all levels 

• Growth mindset with a passion for continuous learning 

• Internship or experience in the semiconductor industry is a plus 

• Demonstrated leadership and a track record of impact are highly desirable 

• Interest in and knowledge of the semiconductor industry and Micron is preferred 

• Proficiency in Python, R, SQL for statistical analysis, process modeling, and data analytics is preferred.

• Experience with Visual Basic for automation and tool integration is preferred.

Embody Micron’s core values: 

• People – Respect, develop, and empower others 

• Innovation – Drive continuous improvement and breakthrough thinking 

• Tenacity – Show grit and determination 

• Collaboration – Build trust and foster teamwork 

• Customer Focus – Deliver excellence and value  

What to Expect 
Micron is proud to be an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other protected factor. 

Performs hardware, software, semiconductor design or telecomm engineering assignments. This job mapping should be used only if the position cannot be mapped specifically to other design/development engineering jobs.

Micron is a global leader in memory and storage solutions, enabling transformative technology that enriches life for all. With over 40 years of innovation, Micron plays a pivotal role in the data-driven economy, where memory and storage are strategic differentiators. We are committed to sustainability, employee well-being, and community support, and we foster a culture of inclusion, collaboration, and continuous improvement.  

Key responsibilities and duties include:  

Equipment Development:  

• Develop and optimize advanced packaging equipment for technology enablement, including wafer-level packaging and stacking  

• Focus on improving equipment capability, enabling process improvements, reducing costs, and enhancing productivity  

• Establish and improve equipment management projects to deliver technode requirements  

Equipment Strategy:  

• Evaluate and promote new equipment and materials to enhance process capabilities  

• Establish hardware strategic roadmaps for 5+ years in post probe wafer and die processing  

• Developing wafer and assembly equipment to meet the physical and electrical requirements of Micron’s products. cost, availability, and improve hardware and process capability  

Quality Improvement:  

• Ensure defense coverage through process, measurement, inspection, and testing  

• Establish correlations between defense mechanisms to identify improvement opportunities  

• Conduct continuous data analysis to establish advanced controls and identify improvement opportunities  

Collaboration and Coordination:  

• Work closely with internal and external partners to build and execute technology development strategies aligned with organizational and business objectives  

• Work closely with various teams, including the Package Integration, PWF/Assembly Engineering, Front End Wafer Fab, Assembly/Test Engineering, Product Engineering, and Global Quality, to integrate manufacturing processes for optimal performance and quality control  

• Ensure smooth transition from new product development, qualification, small volume production to high volume production  

Job Requirements: 

• Bachelor’s or advanced degree in Engineering or Science is required 

• Strong analytical, logical, and critical thinking skills 

• Effective communicator, able to collaborate across all levels 

• Growth mindset with a passion for continuous learning 

• Internship or experience in the semiconductor industry is a plus 

• Demonstrated leadership and a track record of impact are highly desirable 

• Interest in and knowledge of the semiconductor industry and Micron is preferred 

• Proficiency in Python, R, SQL for statistical analysis, process modeling, and data analytics is preferred.  

• Experience with Visual Basic for automation and tool integration is preferred. 

Embody Micron’s core values: 

• People – Respect, develop, and empower others 

• Innovation – Drive continuous improvement and breakthrough thinking 

• Tenacity – Show grit and determination 

• Collaboration – Build trust and foster teamwork 

• Customer Focus – Deliver excellence and value  

What to Expect 
Micron is proud to be an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other protected factor. 

Performs hardware, software, semiconductor design or telecomm engineering assignments. This job mapping should be used only if the position cannot be mapped specifically to other design/development engineering jobs.

Job Description

1. Prepare and review Instrumentation, Control and Automation (ICA) Works specifications.
2. Assist the ICA Lead and manage the engineering design works for the Control System Architecture, Data Communication Networks, and Piping and Instrumentation Diagrams (P&IDs), Programmable Logic Controller / Distributed Control System (PLC/DCS), DDC (Direct Digital Control) and Supervisory Control and Data Acquisition (SCADA) and any other ICA Works as required.
3. With experience in the programming for any of the PLCs like Siemens, Schneider, AB, ABB and others will add on the credits.
4. With experience in the system of Building Management (BMS), Fire Alarm, One-Way and Two-Way, ELV, ACMV will be preferred.
5. Handle equipment package and procurement including technical specifications preparation, technical clarification, technical bid analysis, etc.
6. Collaboration with multiple stakeholders including internal teams of different trades, clients, consultants, other packages contractors, sub-contractors and vendors to ensure success of the project.
7. Prepare, review and liaison with subcontractor(s) in the design and submission, ensuring allproject specifications and design standards are met.
8. Work with cross function project team to support project activities, i.e. schedule, process, progress claims, work progress, etc.
9. Manage and supervise the project execution, site installation, inspection, testing and commissioning, plant proving related to Instrumentation, Control and automation system and interface works with other disciplines and all stakeholders.
10. Attend to clients’ comments and ensure clients’ approval & acceptance to all ICA related design, installation and Testing & Commissioning Works.
11. Resolve the site technical related matters.

Design, Engineering, FAT, Installation, Testing and Commissioning of:-

1. System Control PLC/DCS, DDC and SCADA.
2. Input / Output list.
3. Data Communication Network for ICA, BMS, ACMV, Fire Alarm Panels.
4. Instrumentation.
5. FAT and SAT of Interfacing Panels, Instruments, Pumps, etc.
6. Cable Support System.
7. Cabling & Termination Works.

Requirements

1. Diploma in Electrical & Electronic Engineering / Instrumentation & Control Engineering /Mechatronics /Advanced Diploma in Process Control and Instrumentation or equivalent.
2. Experience in Selection, Installation, Testing and Commissioning of the Instrumentation.
3. Experience in ICA engineering Works, preferably in water/wastewater projects will be an added advantage.
4. Experience in Programming of PLC/DCS, DDC and SCADA will be an added advantage.
5. Experience in the system of Building Management (BMS), Fire Alarm, One-Way and Two- Way, ELV, ACMV will be preferred.
6. Experience in ICA, BMS, Fire Alarm, One-Way and Two-Way, ELV, ACMV panel design will be an added advantage.
7. Experience in Project Execution, Supervising and Coordination with subcontractors, consultant and Client.
8. Good knowledge in Autocad 2D, familiar with Microstation and Autocad 3D software will be an added advantage.
9. Good technical understanding and experience in water, wastewater and environmental engineering works.
10. Meticulous and analytical with excellent problem-solving skills.
11. Able to work under tight deadlines.
12. Highly motivated and ability to work independently with minimal supervision.
13. Minimum 3 years relevant experience in engineering, installation, testing and commissioning of ICA Works. Candidate with more than 5 years experiences can be considered as senior level.
14. Fresh graduated candidates are also welcome.
15. Able to work in the Tuas South area and Changi East area in Singapore.

Job Description

• Lead and manage the eletrical engineering design works.
• Prepare and review the deisgn of the electrical works, e.g. equipment sizing, cable sizing and voltage drop calculation, power system study, electrical layout single line diagram, schematic drawings, etc.
• Handle equipment packages and procurement including technical specifications, technical clarification, technical bid analysis, etc.
• Develop cost estimates for electrical equipment and eletrical works.
• Develop work schedule and coordination of the project works.
• Review the sub-consultants, sub-contractors and vendors' design and submission, ensuring all project specificaions and design standard are met.
• Prepare all relevant checklists for installation, testing and commissioning works.
• Collaboration with multiple stakeholders including internal teams of different trades, clients, consultants, other packages, sub-contractors, and vendors.
• Attending to client's comments and ensuring client's approval and acceptance of all electrical works related design, installation, testing and commissioning works.
• Handle and resolve all site technical related matters.

Requirements

• Bachelor Degree in Electrical Engineering
• 5 to 8 years of relevant experience in construction industry. Working experience in water or wastewater industry will be an advantage.
• Experience in design, installation, testing and commissioning of electrical works, e.g. high voltage system, low voltage system, transformers, motor starters, cablnig works, earthing and lightning protection system, etc.
• Experience in project execution, project coordination, supervision and coordination with clients, consultants, and all other sub-tier under the Contractor.
• Good technical knowledge in electrical system.
• Well verse in power system anaylsis software e.g. ETAP and BIM software e.g. Bentley, Revit and Navisworks.
• Team player with good interpersonal skills.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and able to work independently with minimal supervision.
• WIll be required to work full time at project site.

Responsibilities:

• Take on the role of EDC AES Project Lead Engineer responsible for ship automation related system design and in charge of the Ship Management System (SMS) and its interfaces to platform system equipment and related control and monitoring logics, which includes basic and detail design :SMS architecture
  Generate I/O list
  Review system functional description from internal engineering trades and realise platform system automation, control logics and monitoring in SMS
  Perform integration of third party equipment / system with SMS
  Perform room arrangement integration with internal engineering trades
  Design control console and console panel layout arrangement
  Design control room arrangement layout
  
• Responsible for the functional design of safety and surveillance related systems, such as:Propulsion control system (PCS)
  Power management System (PMS)
  Dynamic positioning system
  CCTV system
  Fire Detection System
  
• Review vendors’ technical proposals to ensure solution meets the functional requirement.
• Responsible for ensuring the Contractual technical requirement and Classification requirement of automation related design are fulfilled and within project schedule.
• Liaise with client and other internal engineering trades for project coordination.
• Attend technical review and meetings with client and vendors during project execution to ensure requirement are fulfilled, technical solutions are discussed and technical issues resolved.

Knowledge & Skills:

• Knowledge of Marine Electronics and Automation systems
• Knowledge in computer networking, control instrumentation and control system design
• Knowledge of standard communication protocols like Modbus RTU/TCP, Profibus, RS422, RS485, NEMA, CANbus, J1939
• Knowledge in Autocad for drafting purpose
• Good Interpersonal Skills, problem solving skills and is a team player.
• Good time management and able to meet tight deadlines.

Requirements:

• Degree in Electrical, Automation, Mechatronic or any related engineering field
• Minimum 1 year working experience in Automation or Marine/offshore Industr

Other Information:

• Location: 16 Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Responsibilities

1. Understand, plan and execute projects’ contractual & technical requirements and deliverables,

2. Responsible for all project operations, from project quotation preparation, engineering design to procurement, project kick off, project execution, site installation, site inspections, attend and minute internal & external meetings,

3. Prepare and submit Pre-condition site survey reports, material submittals, Work progress reports, project handover reports, COC, Billing and invoices,

4. Lead & coordinate with all internal departments, external parties such as consultants, relevant Authorities, vendors & suppliers etc,

5. Manage assigned project sites work schedule, budget, work safety compliance, project resources, tools, equipment, materials & consumables,

6. Provide technical support, effective training and coaching to assigned project teams,

7. Manage and maintain good and effective working relationship with clients and end users,

8. Manage & enforce effective work processes & safe work practices to enhance performance level and service excellence to customers,

9.Motivate and manage cross-functional, multi-site teams on projects from inception to closure

10. Manage & enforce staff compliance to company’s code of conduct and disciplinary procedure,

11. Support Organizational transformation objectives & continuous improvement drives to meet/exceed company objectives and mission,

12. To support other work/project assignments by project manager,

13. Oversee day to day operational matters and challenges.

Qualification and Requirement

1. Diploma/BS Degree in Mechanical, Electrical or Industrial Engineering with a minimum of 3-5 years in construction projects & Building maintenance/Operations/Engineering leadership with Strong technical knowledge of building & M&E systems will be advantageous,

2. High Level interpersonal and leadership skills,

3. Strong customer service, analytical, and interpersonal skills,

4. Excellent organizational, project management, and problem solving skills,

5. A proactive & positive person with a strong motivation to learn, self-starter, ability to handle multiple tasks and priorities,

6. A good team player yet able to deliver independent assignments as required,

7. High level of integrity, ownership and drive

Email your cv to victoria_lau@pnhgrp.com or +65 8600 3908.

Job Description

• Industry/ Organization Type: Manufacturing (Machinery & Equipment)
• Position Title: Assistant Engineer (Environment Testing & Drafting)
• Working Location: Kent Ridge
• Working Hours: 5 days (Mon – Thu, 830am – 600pm; Fri, 830am – 530pm)
• Salary Package: Basic salary up to $3,500 + AWS
• Duration: Permanent Role

Key Responsibilities

• Conduct lab tests using equipment like electrodynamic shakers and temperature/humidity chambers according to test procedures.
• Guide test operators in using equipment to meet test requirements.
• Make approximately 10 trips to different laboratories every quarter
• Coordinate with equipment designers to schedule functional checks on the products being tested.
• Perform visual inspections of products before and after testing, following a checklist.
• Notify customers of any test anomalies and discuss necessary follow-up actions.
• Record and provide test and inspection results.
• Undertake mechanical drafting and design tasks.

APPLY NOW!!!

• Higher NITEC or Diploma in Mechanical Engineering.
• Experience with ESS/PDU/GD&T is beneficial but not required.
• Ability to work independently with minimal supervision.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #72103 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Details:

You will be part of the technical specialists working at the waste management facilities including Integrated Waste Management Facility (IWMF) - a large-scale waste management infrastructural project, and Tuas South Incineration Plant (TSIP).

· You may be part of the project team to supervise IWMF construction progress.

The work scope includes:

1. To work with project consultants and key stakeholders, such as other government agencies, on the design of the various facilities in IWMF and ensure that IWMF is constructed, erected, installed in accordance with design specifications and complying with statutory requirement.
2. To participate in the testing, commissioning of mechanical, process, or electrical, instrument, control and automation equipment/systems.
3. To attend factory acceptance tests (FATs) at local and overseas factories to witness and verify quality and performance of major equipment/systems.

· You may be part of the technical team in the operation and maintenance of TSIP. Your work scope includes:

1. To lead a team of technical supervisors and specialists and coordinate maintenance work between contractors and maintenance sections to ensure the safe, smooth and efficient operations of the waste-to-energy facility.
2. To implement preventive maintenance and overhaul programs for the facility's electrical and control equipment such as turbo-generators, motors, switchgears, low tension and high tension equipment, distributed control system and field instruments.
3. To administer contracts for the operation and maintenance of mechanical, EICA or building services equipment
4. To enforce permit-to-work system and safe work culture including supervising contractors’ work for quality and safety
5. To formulate and prepare standard operating and safety procedures, equipment testing / changeover programmes
6. To perform shift work in a waste-to-energy facility, if needed
7. To work closely with the management of TSIP to implement initiatives on safety and continuous improvement to enhance the safety culture and standards within the plant, as well as drive projects to achieve operational excellence.

Job Requirements:

• Degree in Engineering (Mechanical, Electrical, Civil and Structural Engineering, Chemical, Environmental Engineering)
• Preferably with 3-5 years of relevant experience. Fresh graduates are welcome to apply*.
• Candidates with professional certification, e.g. Professional Engineer, Steam Engineer, Licensed Electrical Worker, Workplace Safety and Health Officer, will be given preference
• Possess good technical background and strong analytical skills. Knowledge in solid waste management would be an advantage
• Proficient in Microsoft Office, and preferably in Navisworks and Primavera P6
• Mature, independent, resourceful, and a good team player
• Good interpersonal communication, presentation and writing skills
• Able to perform shift work will be advantageous
• Able to work at construction sites and travel overseas for FATs and training

As part of the shortlisting process for this role, you may be required to complete a medical declaration and/or undergo further assessment.

*Officers will first undergo training such as foundation modules on the operation and maintenance of waste management facilities and WTE plants; and an attachment with On-Job-Training at TSIP.  Thereafter, they can be deployed for shift or non-shift work at IWMF or TSIP.

Location: Tuas

Working Arrangement:

Working Day : Everyday

(including weekends and public holidays depending on 12-hour shift cycle)

Rest Day : 5 rest days within one 15-day

Salary: TBC depending on relevant experience

Permanent Position

EA License No.: 96C4864

Reg No.: R26159658 BRANN LEONG CHUN HOE

• 5 Work Days, 8.30am-5.30pm / 9am-6pm 

• Office Near to Kaki Bukit MRT, Singapore 

• Medical Benefits Provided 

  Entitled to Yearly Bonus & Performance Bonus 
  

Job Requirements: 

1. Preferable Master's Degree in Computer Science, Applied Mathematics, Electrical Engineering, Pattern Recognition, Artificial Intelligence, Automatic Control, Operations Research, Biology, Physics / Quantum Computing, Neuroscience, Statistics or a related field. 

2. Familiar with common machine learning and deep learning algorithms and keeping track with the latest SOTA implementations. 

3. Strong programming skill in Python, C / C++, proficient in mathematical / statistical concepts and exceptional coding skills 

4. Hands-on experience with AI / ML frameworks be familiar such as Caffe, PyTorch, TensorFlow, MxNet etc. 

5. Have rich project experience in machine learning and deep learning, be familiar with common algorithm models, such as CNN, RNN, LSTM, Transformer, ViT, etc., and be able to improve and innovate models according to actual problems. 

6. Experience in familiar the design, parameter tuning and optimization methods of neural network models is a plus 

7. Experience in model compression and in the transplantation and optimization of deep learning forward inference on various platforms, including NPU / GPU / DSP / ARM on mobile platforms and CPU / GPU on server platforms is also a plus. 

8. Strong logical thinking and problem-solving ability, able to independently undertake the research and tackling of complex problems and team spirit are highly valued traits. 

Job Responsibilities: 

• Algorithm Development: Development and optimization of machine learning and deep learning algorithms to solve complex business problems. 

• Model Training and Evaluation: Participate in the construction and training of artificial intelligence models, including but not limited to neural networks, decision trees, etc., evaluate and optimize the models to improve their performance and accuracy. 

• Data Analysis and Preprocessing: Conduct data collection, cleaning, preprocessing and feature engineering, provide high-quality data for model training, and arrange and guide data labelers to carry out data labeling and other work. 

• Collaboration and Deployment: Collaborate with team members to integrate algorithm models into actual business systems, promote the implementation of projects, and realize the intelligent upgrading of products. 

• Research and Innovations: Stay up to date with the latest advancements in AI and ML technologies. Explore and deploy new technologies, drive innovations to create value to market needs, and enhance the company’s competitiveness. Audio and video algorithms for surveillance/monitoring applications which also include the research and implementation of algorithms involving target detection, feature extraction, tracking, and recognition. 

• Documentation and Reporting: Maintain comprehensive documentation of algorithms, experiments, and project workflows. Communicate results and findings to technical and non-technical stakeholders. 

Reolink, a leader in intelligent visual technology for homes and businesses, was founded in 2009 by a group of engineers with a strong commitment to and passion for smarter security solutions. 

Our Products are now trusted by millions of users across more than 110 countries and regions worldwide. Building on this trust, we continue expanding our presence and bringing our innovations to more markets around the globe. 

Reolink remains committed to delivering advanced, reliable, and user‑centric solutions that empower people to protect what matters most. 

Jobscope:

• Define requirements and features for Back-end semiconductor equipment.
• Develop and improve the concepts/architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Produce detailed engineering drawings.
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations, and product requirements.
• Application of analysis tools like Fish Bone Diagram, FMEA, DOE, etc

Requirements:

• Degree in Mechanical or Mechatronics Engineering with minimum of 5 years of experience in automation design.
• Good knowledge and experience in the design of Automation or semiconductor equipment, High precision machine design, or Design of High-Speed Pick and Place mechanisms.
• Proficient with 3D CAD software and performing Equipment troubleshooting.
• Able to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.
• Ability to work independently with high level of motivation and communicate with all levels.
• Able to travel overseas for field support when required.

To apply, please visit www.gmprecruit.com

To learn more about this opportunity, please contact Fiona Koh | fiona.koh@gmprecruit.com

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Fiona Koh| Registration No: R11092398

Responsibilities:

•            Plan and manage daily facade site works

•            Supervise installation of curtain wall, aluminium and glass

•            Coordinate with workers, subcontractors and suppliers

•            Check work quality and site safety

•            Prepare shop drawings and work schedule

•            Attend site meetings and take minutes

•            Prepare progress reports and simple documentation

•            Support Project Manager on site matters

Requirements:

•            Diploma or Degree in Civil / Construction / Mechanical Engineering

•            At least 2 years of facade or construction site experience (preferred)

•            Responsible, willing to learn and hardworking

•            Basic computer skills (AutoCAD, Excel, Word)

Job Responsibilities:

• Perform checks on the structural, architectural and M&E materials/works to ensure that the final touch-up works are ready for inspections.
• Conduct regular inspections to ensure works are in compliance with method statements (in accordance to BCA’s Good Industry Practice)
• Monitor the performance of subcontractor workers for all trades and ensure any defects are properly rectified
• Involved in preparing relevant QA/QC reports
• INvolved in implement QA/QC plans and ensure PPVC quality before delivery
• Ensure the functionality of the product before handing over to buyers
• Assist in preparing for QM submissions
• Assist in yearly ISO audits
• Assess, feedback on the construction process and procedures
• Execute quality control as per site specific materials and Works Quality Plan.
• Conduct relevant training for sub-con and internal staff.
• Issuance and handling of Site Memo.
• Monitor undertaken corrective and preventive actions against non-conformities.
• Arrange and liaise with BCA for CONQUAS/QM assessments.
• Recommends solutions for critical and/or frequent recurring defects to Project Team.
• Ensure all the method statement used has obtained approval from the clients and consultants.
• Follow-up all the required tests as per contract requirement.
• Attend regular site meetings – QAQC, Landscape Coordination Meeting and Client Meeting.
• Attend off-site inspection – Precast and Structural Steel Works (Malaysia and Singapore Factory)
• Follow the developer’s Quality Inspectors (QI) and Customer Service Officers (CSO) for inspection prior to building handover to owners.
• Attend to client ’s defects during Defect Liability Period.
• Assisting in handover of the common areas to management team.

Job Requirements:

• Min Diploma or Degree related to QA/QC or Engineering / Construction related field
• Prior experience related to construction industry (HDB, Condominium projects etc.) is added advantage
• Good knowledge of construction quality control/assurance is necessary

Job Description

• Industry/ Organization Type: M&E Consultancy Firm
• Position Title: Mechanical Design Engineer/Project Engineer (Building and Infrastructure)
• Working Location: East – Paya Lebar
• Working Hours: 5 days (Mon-Fri: 8.30 am - 6 pm)
• Salary Package: Up to SGD 5500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Build relationships with clients and contractors from other organizations
• Carry out duties in accordance with company procedures and implement prescribed systems of work
• Understand design philosophy/design fundamentals and communicate engineering solutions to project stakeholders
• Perform engineering calculations with the aid of engineering software such as Computational Fluid Dynamics (CFD), Full Hydraulic Calculation (FHC)
• Familiar with Architect, Structural/Service Engineers drawings/specifications
• Carry out investigative and technical review works
• Responsible for the development and production of drawings/calculations/specifications /reports
• Set an example for placement of students and junior engineers

APPLY NOW!!!

• Min Diploma in Mechanical Engineering
• Min. 1 year of working experience in the consultancy firm in the design of ACMV, fire, and hydraulic services
• Experience as a Contractor in project execution will be considered
• Experience in Energy Storage System (ESS) / Capability in carbon, sustainability, resources conservation, and renewables will be an added advantage
• Carry out tasks and duties assigned in a positive and dignified manner

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #74684 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Micron’s vision is to transform how the world uses information to enrich life for all. Join a world-class global team focused on one thing: using our expertise in the relentless pursuit of innovation to enable high value technology driven solutions for customers and partners. The solutions we create help make everything from virtual reality experiences to breakthroughs in supercomputing and artificial intelligence possible. We do it all while committing to integrity, sustainability, and giving back to our communities. Because doing so can spark the very innovation we are pursuing.  

We are currently experiencing a ground-breaking period in artificial intelligence (AI), where AI is anticipated to become an integral component of daily life. This proliferation is being fueled by advances in memory and compute technologies. High bandwidth memory (HBM) is at the forefront of these innovations. Micron’s Advanced Packaging Technology Development (APTD) is responsible to deliver package development for high performance memory products and transfer to manufacturing.  

We are looking for an Advanced Packaging Integration Engineer to join our Advanced Packaging Technology Development (APTD) team! 

Your responsibilities include but are not limited to developing and enabling deployment of advanced packaging technologies to meet performance, cost, manufacturability, quality, reliability and schedule requirements. You will also be required to identify, diagnose, and propose yield related breakthroughs. You will have opportunity to work with peers and partners across organizations to coordinate the development and launch of new technologies and integration flows for solutions that drive the future.  

Key responsibilities and duties include:   

Technology Development:  

• Develop and enable advanced package technology for various post-fab wafer finish and assembly processes  

• Focus on improving product quality, driving yield improvements, reducing costs, and enhancing productivity  

• Integrate semiconductors while partnering with process and product engineering teams  

Yield Improvement:  

• Achieve and improve yields through silicon package integration innovation, not limited to layout/design or process margin improvements  

• Collect and analyze data to provide actionable outcomes and decisions for layout, design, or integration flow changes  

• Work with Probe, Yield Analysis, Test, and Product Engineering teams to drive improvements  

Quality Improvement:  

• Ensure defense coverage through process, measurement, inspection, and testing  

• Establish correlations between defense mechanisms to identify improvement opportunities  

• Conduct continuous data analysis to establish advanced controls and identify improvement opportunities  

Collaboration and Coordination:  

• Work closely with internal and external stakeholders to build and execute technology development strategies aligned with organizational and business objectives  

• Work closely with various teams, including the PWF Engineering, Assembly Engineering, Front End Wafer Fab, Assembly/Test Engineering, Product Engineering, and Global Quality, to integrate manufacturing processes for optimal performance and quality control  

• Ensure smooth transition from new product development, qualification, small volume production to high volume production  

• Provide Process Of Record (POR) and Model Of Record (MOR) documentation for product transfer to production High Volume Manufacturing Fabrication facilities  

Requirements  

• B.S/M.S./Ph.D. (or equivalent education) in Electrical Engineering, Mechanical Engineering, Chemical Engineering, Physics, Material, or other related technical fields  

• 2 or more years of semiconductor process integration experience, preferably with know-how to develop and enable advanced package technology for post-fab wafer finish and assembly processes 

• Proficiency in Python, R, SQL for statistical analysis, process modeling, and data analytics. 

• Experience with Visual Basic for automation and tool integration. 

• Familiarity with E3, FDC (Fault Detection and Classification), and RMS (Recipe Management System) for equipment and process control. 

• Strong data analytics capabilities to support SPC, DOE, defect analysis, and dashboarding. 

• Strong understanding of process flows, process interactions, and ability to integrate semiconductors while partnering with process and product engineering team  

• Ability to resolve complex issues through root-cause or model-based problem solving  

• Tenacity to work effectively under timelines and limited resources  

• Consistent track record to solve problems and address root causes