Total 410 Engineering job vacancies

Salary: up to $3000

Duration: 1 year

Working Days & Hours: Mon-Fri Office Hours

Location: AMK

Job Description:

• Log extraction from electronics products according to SOP

• Preparation work on electronics products for hardware investigation (Access inside by jig and laptop PC) according to SOP Support investigation work

• Data input/uploading work into MHI management system

• Data input/uploading work into authorities management system

• Periodical check on authorities management system and summarize situation

• Packing work in case further investigation at overseas company is needed

• Faulty goods collecting from Automobile Association approved workshops and care centers

• Periodical inventory follow-up of collected faulty goods

Job Requirements: Min Diploma in Engineering or similar

Interested candidates, please submit your resume to: allylok@recruitexpress.com.sg

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

allylok@recruitexpress.com.sg

Job Description

• Your main role is to perform troubleshooting and repair works for the Refrigerated Container (Reefer) in PSA Terminals (including on board vessel).

• Coordinate with Control Supervisor to perform VAS services (including of reefer monitoring & plug/unplug of sensitive reefer) when required.

• Carry out equipment improvement works to improve equipment reliability and safety according to manufacturers’ specifications.

• Maintain good housekeeping and cleanliness of work areas.

• Any other duties as assigned by Supervisor/ Manager.

Job Requirements

• NITEC / Higher NITEC / Diploma in Refrigeration/Electrical/Mechanical or equivalent.

• Team player and able to work independently

• Willing to work on 12hr-shift and outdoors

• Entry level applicants are encouraged to apply

• Class 3 driving license would be an added advantage

We thank all applicants for your interest and regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Assisting engineers with the design, creation, and assembly of machines, systems, and their components.
• Performing tests and inspections to verify designs and ensure quality control, which may involve using measurement metrology or engineering simulations.
• Supporting the repair, maintenance, and troubleshooting of systems and equipment
• Following workplace safety and health (WSH) procedures, preparing documentation, and ensuring compliance with relevant standards (e.g., ISO 9001, ISO 14001, ISO 45001).
• Working closely with engineers, project teams, and technical support staff to meet project requirements and provide feedback.
• Applying specific technical skills related to the project, which could range from using automation control for machines to working with software development lifecycle methodologies. 

Requirements

• Min Diploma in Mechanical, Electrical, Computer Science or relevant
• Min 1 year of working experience

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of leading and directing projects and ensure they are directed towards a common objective
• Responsible for engaging and communicating with stakeholders to deliver project milestones and comply with strict deadlines
• In charge of ensuring client satisfaction and manage escalations, acting as single point of contact to the client
• In charge of ensuring that the project delivers as-sold solution, remains within the baseline budget and is delivered on time whilst maintaining quality criteria and client satisfaction
• Coordinate activities of the project teams through task delegation, resource assignment and programme management
• Take charge of proper documentation is in order
• Any other duties as assigned

Job Requirement:

• Minimum Nitec in Electronics / Mechanical / Electrical/ Mechatronics Engineering or related field
• Minimum with 1 year working experience in assembly of equipment / machinery industry

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description

• Industry/ Organization Type: Precision Manufacturing
• Position Title: Engineering Assistant
• Working Location: Commonwealth
• Working Hours: 5 days (Mon – Fri, 8.30am – 6.00pm)
• Salary Package: Basic salary up to $3,200 + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Interpret engineering drawings to determine machining needs and ensure compliance with technical and quality standards.
• Ensure schedules and quality standards are met. Monitor machining processes.
• Provide technical input on machining and tooling design.
• Analyze current production processes to find improvement opportunities.
• Assist engineers in designing and developing precision components and systems.
• Create technical drawings and documents using CAD software.
• Track project progress and report any issues to the engineering team.
• Coordinate with other departments for smooth project execution.

APPLY NOW!!!

• Diploma/Degree in Mechanical/Precision Engineering or related field.
• Skilled in CAD software like MasterCAM, SolidCAM, AutoCAD.
• Experience in production planning, costing, and time estimation.
• Strong understanding of machining processes and equipment.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #75126 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

The successful candidate will be involved in the development of permanent Traffic Plans and temporary Traffic Control Plans. The responsibilities also include undertaking traffic impact assessments, conduct site visits and liaisons with clients / other third parties.

Requirements

• Self-motivated, able to multi-task and keen to learn
• Team player with good interpersonal and communication skills 
• Relevant experience in the traffic engineering, permanent and / or temporary road design, and traffic analysis.
• Knowledge of local codes and regulations
• Working knowledge of SIDRA software
• Proficient use of AutoCAD as a large component of the job scope involves drawing preparation
• Preferably local or PR
• Degree in Civil Engineering or equivalent

Job Description

• Industry/ Organization Type: Precision Manufacturing
• Position Title: Engineering Assistant
• Working Location: Commonwealth
• Working Hours: 5 days (Mon – Fri, 8.30am – 6.00pm)
• Salary Package: Basic salary up to $3,200 + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Interpret engineering drawings to determine machining needs and ensure compliance with technical and quality standards.
• Ensure schedules and quality standards are met. Monitor machining processes.
• Provide technical input on machining and tooling design.
• Analyze current production processes to find improvement opportunities.
• Assist engineers in designing and developing precision components and systems.
• Create technical drawings and documents using CAD software.
• Track project progress and report any issues to the engineering team.
• Coordinate with other departments for smooth project execution.

APPLY NOW!!!

• Diploma/Degree in Mechanical/Precision Engineering or related field.
• Skilled in CAD software like MasterCAM, SolidCAM, AutoCAD.
• Experience in production planning, costing, and time estimation.
• Strong understanding of machining processes and equipment.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #75126 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Sales & Marketing Assistant

Job Summary

You will support the Senior Sales Supervisor and Business Development Manager in daily commercial activities to help meet the company’s sales and growth targets in the maritime industry.

Responsibilities

• Assist in achieving annual sales and growth targets by supporting sales strategies and activities
• Prepare clear and accurate proposals, quotations, and sales documentation to facilitate client decisions
• Support client outreach by maintaining positive relationships and responding to client needs to foster ongoing business
• Coordinate with internal teams to ensure timely and smooth execution of sales and marketing initiatives
• Maintain and update customer databases, sales records, and reports to provide accurate information for decision-making

Job Description

• Industry/ Organization Type: Manufacturing – Electrical
• Position Title: Assistant Electrical Engineer (Control System)
• Working Location: Tuas (transport provided at Pioneer MRT)
• Working Hours: 5 days, Mon - Fri (8am – 5.00pm)
• Salary Package: Up to $3500 Basic + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Design control panels and electrical systems; create wiring diagrams/schematics and select components.
• Install, test, and commission new control systems and machines.
• Troubleshoot electrical/controls faults (I/O checks, logic issues) and perform repairs and upgrades.
• Configure and tune servo/stepper drives and motion control systems.
• Maintain technical documentation, schematics, and compliance records.
• Work with mechanical, software, and operations teams to improve reliability and uptime.
• Other ad-hoc duties which may be assigned.

APPLY NOW!!!

• Minimum NITEC in Electrical Technology (Power & Control) or equivalent.
• Proficient in MS Office (Word/Excel/PowerPoint).
• Able to commit to OT as and when required on weekdays & weekends.
• Candidates without relevant experience are welcome to apply. Training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #81869 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Well Established Security Inspection Solutions Company

• Salary: $2500 - $2800 (Basic) + $300 Transport Allowance

• Working Hour: Monday - Friday (8.30am – 5.30pm)

• Company Location: Jurong East (Based on Project Site)

• Variable bonus + Excellent Wellfare

• Training Provided

Job Scope:

• Assist Engineers in the maintenance, repair, and installation of equipment. Diagnose errors and technical issues and determine appropriate solutions.
• Support Engineers in project management, including planning, execution, and monitoring.
• Assist with the installation of new equipment and systems.
• Conduct routine troubleshooting of mechanical and electrical equipment to ensure smooth operations.
• Produce timely and detailed reports regarding maintenance activities, project status, and any issues or delays.
• Follow all company field processes and protocols to ensure safety and efficiency.
• Perform basic housekeeping duties to ensure a clean and safe work environment.
• Perform any other engineering-related tasks as assigned by senior engineers or management.

Requirement:

• NITEC / Diploma in Electrical / Mechanical Engineering or equivalent
• 0 - 2 years of relevant working experience in similar position

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Purpose

We are seeking a dedicated and proactive Assistant Engineer to provide frontline technical support. The role involves attending to emergency breakdowns, responding to technical calls, and supporting the engineering team in ensuring minimal downtime and maximum customer satisfaction. This role is critical in supporting 24/7 operations, with specific standby responsibilities during off-peak hours (9:00 PM – 6:30 AM).

Key Responsibilities

• Attend and troubleshoot emergency breakdowns promptly to minimize equipment or vehicle downtime.
• Respond to technical calls and provide timely advice, solutions, or escalation where necessary.
• Assist in diagnosing faults and carrying out corrective actions in line with standard operating procedures (SOPs).
• Document breakdown cases, technical calls, and corrective measures taken for reporting and follow-up.
• Coordinate with vendors, suppliers, or internal departments when additional resources are required.
• Ensure compliance with workplace safety, quality standards, and company policies.
• Be on standby during off-peak hours (9:00 PM – 6:30 AM), as rostered (Tue – Saturday / Sun – Thur).
• Upon activation, arrive at the appointed breakdown site within 1 hour.
• Ensure readiness with tools, equipment, and PPE for immediate response.
• Perform any other engineering-related duties as assigned.

Requirements

• Diploma in Mechanical, Electrical, Automotive, or related Engineering field.
• Minimum 1–2 years of relevant working experience (fresh graduates with strong technical aptitude are welcome).
• Knowledge of troubleshooting techniques, equipment diagnostics, or automotive/electrical systems preferred.
• Strong problem-solving skills and ability to work under pressure during emergencies.
• Good communication skills to handle technical calls and liaise with internal and external stakeholders.
• Willingness to work shifts, weekends, or be on standby for emergency call-outs.
• Possession of a valid Class 3 driving license is an advantage.

Fresh without experience-Starting basic is $2800-$3000+$500

Industry: Engineering

Located at Kaki Bukit

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• To attend weekly meeting and presentation
• To write technical report
• To handle specific jigs during service jobs
• Assist senior colleagues to perform higher-level job like robot teaching & sub-units
• To perform 24x7 standby duties based on roster
• To perform ad-hoc shift work when needed when required.
• To perform ad-hoc delivery work

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply
• Have driving license

Applications:

Please submit a copy of your updated CV in MS Word format stating to emilyfong@atomrecruit.com:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Job Description

• Industry/ Organization Type: Manufacturing – Electrical
• Position Title: Assistant Electrical Engineer (Control System)
• Working Location: Tuas (transport provided at Pioneer MRT)
• Working Hours: 5 days, Mon - Fri (8am – 5.00pm)
• Salary Package: Up to $3500 Basic + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Design control panels and electrical systems; create wiring diagrams/schematics and select components.
• Install, test, and commission new control systems and machines.
• Troubleshoot electrical/controls faults (I/O checks, logic issues) and perform repairs and upgrades.
• Configure and tune servo/stepper drives and motion control systems.
• Maintain technical documentation, schematics, and compliance records.
• Work with mechanical, software, and operations teams to improve reliability and uptime.
• Other ad-hoc duties which may be assigned.

APPLY NOW!!!

• Minimum NITEC in Electrical Technology (Power & Control) or equivalent.
• Proficient in MS Office (Word/Excel/PowerPoint).
• Able to commit to OT as and when required on weekdays & weekends.
• Candidates without relevant experience are welcome to apply. Training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #81869 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Assist engineers in site inspections, maintenance, and project coordination.
• Handle transportation of equipment and materials to project sites.
• Perform basic troubleshooting and support installation of M&E systems.
• Maintain proper documentation and reports for site activities.
• Ensure compliance with workplace safety regulations.

Requirements:

• Diploma in Mechanical and Electrical Engineering
• At least 2 years of engineering support experience in M&E sector.
• Possess a valid Class 3 driving license with a good driving record.
• Good knowledge of M&E systems and hands-on technical skills.
• Ability to work independently and support multiple project sites.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

No experience/Diploma in precision/mechanical/mechatronic/electrical/electronic/Industrial or related engineering

Basic (no experiene / fresh)-$2800-$3000+$500

Location: East

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• To attend weekly meeting and presentation
• To write technical report
• To handle specific jigs during service jobs
• Assist senior colleagues to perform higher-level job like robot teaching & sub-units
• To perform 24x7 standby duties based on roster
• To perform ad-hoc shift work when needed when required.
• To perform ad-hoc delivery work

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at emily.fong@atomrecruit.com

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

We are looking for an entry-level Engineering Assistant to support production operations and ensure high product quality and yield. The role involves monitoring key process parameters, analysing performance data, and working with different teams to maintain smooth operations.

• Monitor critical production parameters to maintain product quality and yield.
• Analyse daily production performance and implement preventive or corrective actions for any deviations.
• Prepare in-process yield reports and perform loss analysis.
• Review and handle disposition of materials for final products.
• Detect and report abnormal losses or defects in a timely manner.
• Collaborate with various departments to ensure seamless production processes.

Requirements:

• Diploma in Engineering or equivalent.
• Strong attention to detail and problem-solving skills.
• Good teamwork and communication abilities.
• Able to work 12-hour shifts.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Fresh without experience-Starting basic is $2600-$3000

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply
• Have driving license

Applications:

Please submit a copy of your updated CV in MS Word format stating to emilyfong@atomrecruit.com:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Job Description & Requirements

• Regularly go on board container and bulk carrier vessels to carry out inspections, measurements, and repair work. Up to 60% of your working week may be spent on board vessels. Weekend work will be required.
• Regularly travel to ports and shipyards in Singapore as well as anchorages in Singapore waters to carry out inspections, measurements and repair work. Up to 60% of your working week may be spent at ports, shipyards and anchorages. Weekend work will be required.
• Manage and supervise a team of welders, machinists, fitters, technicians and other repair workers both onboard vessels and in the company workshop.
• Effectively manage multiple repair jobs on different vessels simultaneously.
• Plan manpower, materials, and work schedules for repair jobs.
• Be responsible for timely delivery of repair jobs.
• Provide cost estimates for repair enquiries.
• Understand technical drawings.
• Prepare inspection, technical, and service reports.
• Create worklists, delivery orders, and other documentation.
• Develop strong working relationships with suppliers and request price quotations for vessel spare parts, main engine components and tools.
• Develop strong working relationships with ship captains, chief engineers, and crew.
• Develop effective working relationships with various teams within the company.

Required Qualifications

• Diploma or Degree in Marine / Mechanical Engineering
• 1 to 3 years of experience in a similar capacity at a ship repair company, shipyard, ship owner company, or ship management company
• Proficiency in Microsoft Word, Excel, and Outlook
• Fluent in English
• Must be a Singapore citizen or permanent resident (PR)

Interested applicants, please send your CV/resume to: careers@hsdmarine.com.sg

We are seeking an experienced R&D RF Engineering Manager to lead the design, development, and optimization of RF receivers and transmitters for military-grade systems. This role involves providing technical leadership in the development of high-performance RF architectures that meet applicable military standards, including MIL-STD-461 and MIL-STD-810. The successful candidate will demonstrate strong technical expertise, leadership capability, and the ability to deliver robust solutions from concept through deployment.

Be Part of Our Success

• Lead the end-to-end design of RF receivers and transmitters, including architecture definition, component integration, signal processing, and performance optimization for military communication systems

• Provide technical leadership and mentorship to RF engineers, conduct design reviews, and ensure delivery in line with project schedules and budgets

• Perform RF simulation, modeling, and validation using tools such as ADS, HFSS, and MATLAB; oversee prototyping, testing, and iterative refinement in laboratory and field environments

• Prepare technical documentation, design specifications, and compliance reports to support internal reviews and military audits

• Identify and manage technical risks to ensure design robustness under harsh environmental conditions, including temperature extremes, vibration, and radiation

Qualities We Value

• Bachelor’s or Master’s degree in Electrical Engineering, RF Engineering, or a related discipline

• Strong expertise in RF circuit design, including mixers, oscillators, filters, amplifiers, and antennas

• Proficiency with RF design and simulation tools such as Keysight ADS, Ansys HFSS, Cadence Virtuoso, and scripting or programming in Python or C++ for design automation

• Working location is in Jalan Boon Lay

• Singaporeans only

Please apply with the following information

Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Japanese MNC

Salary $2600-$3500

Location: Sim Drive

Industry: Electronic Component Manufacturer

Monday to Friday 8am to 5pm

Diploma in Clean Energy/Industrial/Automation/Precision/Manufacturing or related field welcome

Requirements

• Fresh without experience welcome
• Diploma in Clean Energy/Industrial/Automation/Precision/Manufacturing or related field welcome

Job Roles

• Clean room environment
• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Train to become future leader
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at emily.fong@atomrecruit.com

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Overall Summary:

Mainly supporting security aspect like firewall checkpoint, security appliances - configuration, troubleshooting, capacity planning. Supporting current operation and deployment of resiliency project. This is a 2-year direct contract position.

Roles and Responsibilities:

• Directly reporting to Security Senior Manager
• Assist Architect team on new infrastructure design, implementation, and management of network solutions that form the core infrastructure, ensuring seamless integration across different platforms. This includes procurement of necessary equipment.
• To provide comprehensive product knowledge on the data technology required to deliver, support the networks infrastructure.
• Collaborate with the team to identify network and system needs, monitor performance metrics, troubleshoot, and resolve network-related issues, and implement improvements.
• Deliver project management for network activities encompassing upgrades, deployments, and migrations. Provide technical guidance and user support as required.
• Develop, maintain, and update documentation covering the network environment and operational procedures.
• Generate reports and detailed documentation outlining findings, implemented solutions, and recommendations for further enhancements.
• Oversee network environment to maximize performance, scalability, and minimize downtime.
• Closely coordinate and conform to Change Management policies, process, and procedures on any network changes.
• To implement approved changes, troubleshoot to identify root causes and implement effective solutions.
• Experience on Automating daily network tasks using scripting.
• Be available to provide on-call support as needed.

Qualifications/ Requirements:

• Minimum Bachelor in Computer Engineering or equivalent
• Must equipped with CCNP or CCIE, min CCNA
• Network Infrastructure & Hardware: 5+ years experience managing large enterprise network with a strong focus on F5, Palo Alto, Cisco, and CheckPoint Technology.
• Network Devices: In-depth knowledge and profciency with switches, firewalls, load balancers, routers, and ISE.
• Network Design & Troubleshooting: Expertise in designing, monitoring, and network & incident management (LAN, WAN, VPN).
• Strong experience with automation tools: Ansible, Python - Automate in operation / project work before
• Experience with Deployment and automation, advantage to have experience building data center
• Proven track record of success in a fast-paced IT environment.
• Excellent communication and interpersonal skills, allowing you to effectively collaborate with both technical and non-technical stakeholders.
• Ability to work under pressure and delivery the project on time with minimum supervision.
• Certified and experienced with the mentioned technologies.

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at emily.fong@atomrecruit.com

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

-Manage day-to-day activities on the project site, such as project milestones and documentation completeness (eg: plant manuals, as-built drawing submission)

-Raise Purchase requisite and keep track of the PO by using the ERP system

-Implementing document control procedures and policies to ensure consistency and accuracy

-Managing document workflows, including review, approval, and distribution. Frequently update the correspondences when the status has been approved.

-Assist in monitoring project budgets, expenses, invoices and delivery orders

-Arrange the courier services and collect the parcel

-Assist in procurement activities and engineers as needed

-Coordinated expense reimbursement (eg: petty cash claims on site)

-Assist in ordering and tracking the stationaries, pantries & PPE etc

Job Description & Requirements

NACT Engineering provides tethered drone systems for drones of all sizes and use-cases. Our intimate knowledge of robotics systems places us at the forefront of a burgeoning mechanical revolution. As a company at the cutting edge of engineering and robotics, we are looking for a suitable candidate that will push NACT forward as a bespoke drone solutions provider for our clients in the APAC region.

Roles and Responsibilities

• Monitor the functioning of all equipment and report any problems or substandard condition to the supervisor.
• Ensure all log books are maintained according to standard operating procedures.
• Perform equipment assembly according to engineering drawings and guidance from engineers.
• Perform cleaning of all parts as per established cleaning procedures.
• Perform pre-assembly activities such as cleaning and lubricating.
• Conduct product testing and performance testing and record the results.
• Perform final checks and adjustments for any defects to ensure high quality products.
• Perform installation, repair, inspection, reassembly, replacing, refitting, and adjusting products as required.
• Order and stock materials and supplies to avoid materials shortages.
• Receive, unload, unpack and transfer materials to different work stations.
• Develop preventive maintenance procedures to avoid any breakdowns and failures.
• Maintain work area to be clean, safe and orderly.

Job Requirements

• Relevant qualifications in Electrical, Electronic and Robotics Engineering/ Mechanical Engineering or Aerospace Engineering
• Fresh graduate welcome to apply
• Independent and initiated
• With a “can do” attitude and ability to innovate around challenges
• Willing to learn new industry techniques
• Salary package will commensurate with experience and competency

Highlights of working at NACT

• Many amenities available along Alexander Road
• Competitive compensation package remunerated based on skill and experience.
• High level of autonomy on the job with training opportunities provided for upskilling and learning
• Open culture and collaborative environment

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Engineering Assistant
• Working Location: West (Nearest MRT: Joo Koon)
• Working Hours: 5 days (Mon to Fri: 8.30 am to 6.18 pm)
• Salary Package: Basic + OT Pay + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Plan and manage production processes, equipment, and procedures.
• Design production workflows and provide clear work instructions.
• Ensure products meet quality and specification standards.
• Use tools like time study, SPC, FMEA, and others to improve efficiency.
• Propose solutions to prevent product quality issues.
• Design and verify jigs and fixtures for production.
• Carry out other tasks as directed by supervisors.

APPLY NOW!!!

• Minimum NTC 2/3 in Precision Engineering (with relevant experience).
• Basic knowledge of CNC machining (Milling or Turning),
• Familiar with CAD/CAM software (AutoCAD and Mastercam),
• Proficient in Microsoft Word, Excel, Outlook.
• Individuals without experience are encouraged to apply, training is provided.
• Able to work OT on Saturdays if required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #78154 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131