Total 4,721 Engineering job vacancies

Roles & Responsibilities:

• Ensure the Contractor is delivering high-quality work and maintaining good safety practices in accordance with statutory requirements.
• Attend all meetings related to the project including site, progress, variation, coordination, QAQC etc..
• Provide ongoing supervision for the construction of civil and structural works as needed, ensuring compliance with the project specifications, construction drawings, and the Building Control Act and Regulations.
• Carry out supervision and inspection M&E works including but not limited to concreting, pavement, drainage, compaction, curing of concrete, formwork, re-props and removal of props, quality & erection of precast components and steel works.
• Manage and supervise the Resident Technical Officers under his charge.
• Coordinate with safety team and provide overview of WASH and aerodrome safety management systems and implementation of safe working practices on site.
• Ensure all construction works will not impact or affect the operations of the client.
• Ensure client’s emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• Verify all reports and claims relating to M&E works submitted by the contractors.
• Inspect the quality of work and materials delivered to the site, take corrective actions for any non-compliance, and report any materials that do not conform to the specifications to the OIC.
• Verify reports and claims submitted by the main contractors and other ancillary contractors.
• Resolve main contractors’ queries and coordinate the works onsite.
• Adhere to the shift duty roster assigned.
• Undertake any other duties including administrative tasks related to the project as and when instructed by the SRE, OIC, or the Client.

Requirements:

• Min 8 years of M&E experience of which 3 years of experience in major construction works deep excavation, drainage, pipe jacking, ground improvement, flexible/rigid aircraft pavement, supervising & installation of monitoring instruments and collating of monitoring data.
• Degree in M&E recognized by PEB.
• Accredited as a RE with IES
• Able to perform shift work.

• Ensure the Contractor is delivering high-quality work and maintaining good safety practices in accordance with statutory requirements.
• Attend all meetings related to the project including site, progress, variation, coordination, QAQC etc
• Provide ongoing supervision for the construction of civil and structural works as needed, ensuring compliance with the project specifications, construction drawings, and the Building Control Act and Regulations.
• Carry out supervision and inspection C&S, M&E and geotechnical works including but not limited to concreting, pavement, drainage, compaction, curing of concrete, formwork, re-props and removal of props, quality & erection of precast components and steel works.
• Manage and supervise the Resident Technical Officers under his charge.
• Coordinate with safety team and provide overview of WASH and aerodrome safety management systems and implementation of safe working practices on site.
• Ensure all construction works will not impact or affect the operations of the client.
• Ensure client’s emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• Verify all reports and claims relating to C&S, M&E and geotechnical works submitted by the contractors.
• Inspect the quality of work and materials delivered to the site, take corrective actions for any non-compliance, and report any materials that do not conform to the specifications to the OIC.
• Verify reports and claims submitted by the main contractors and other ancillary contractors.
• Resolve main contractors’ queries and coordinate the works onsite.
• Adhere to the shift duty roster assigned.
• Undertake any other duties including administrative tasks related to the project as and when instructed by the SRE, OIC, or the Client.

Requirements:

• Min 8 years of civil engineering experience of which at least 3 years shall be in supervision of

1. major construction works deep excavation, drainage, pipe jacking, ground improvement, flexible/rigid aircraft pavement, supervising & installation of monitoring instruments and collating of monitoring data.

2. Viaduct, road/expressway works, geotechnical and deep excavation works

• Degree in Civil Engineering recognized by PEB.
• Accredited as a RE with IES
• Able to perform shift work.
• Must have Airport flexible and rigid pavement experience for ariport project

• Ensure the Contractor is delivering high-quality work and maintaining good safety practices in accordance with statutory requirements
• Attend all meetings related to the project including site, progress, variation, coordination, QAQC etc..
• Provide ongoing supervision for the construction of civil and structural works as needed, ensuring compliance with the project specifications, construction drawings, and the Building Control Act and Regulations.
• Carry out supervision and inspection M&E works including but not limited to concreting, pavement, drainage, compaction, curing of concrete, formwork, re-props and removal of props, quality & erection of precast components and steel works.
• Manage and supervise the Resident Technical Officers under his charge.
• Coordinate with safety team and provide overview of WASH and aerodrome safety management systems and implementation of safe working practices on site.
• Ensure all construction works will not impact or affect the operations of the client.
• Ensure client’s emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• Verify all reports and claims relating to M&E works submitted by the contractors.
• Inspect the quality of work and materials delivered to the site, take corrective actions for any non-compliance, and report any materials that do not conform to the specifications to the OIC.
• Verify reports and claims submitted by the main contractors and other ancillary contractors.
• Resolve main contractors’ queries and coordinate the works onsite.
• Adhere to the shift duty roster assigned.
• Undertake any other duties including administrative tasks related to the project as and when instructed by the SRE, OIC, or the Client.

Requirements:

• Min 8 years of civil engineering experience of which 3 years of experience in major construction works deep excavation, drainage, pipe jacking, ground improvement, flexible/rigid aircraft pavement, supervising & installation of monitoring instruments and collating of monitoring data.
• Degree in Mechanical or Electrical Engineering recognized by PEB.
• Accredited as a RE with IES
• Able to perform shift work.

Responsibilities:

• Liase with Client, Main-con, Consultant and project team for the planning, execution and completion of projects.
• Determine and implement the needs of the client through project cost, timeline and quality management.
• Manage contractors, sub-contractors, suppliers and staff at site
• Ensure work performed on site comply with the local authority requirements
• Analyze, manage and track project costs against budget
• Maintaining good relationship with all stakeholders to ensure smooth communication throughout the project(s)

Requirements:

• Degree or Diploma in Mechanical Engineering or its equivalent
• Minimum 2 yrs project management experience, preferably in handling Electrical projects for industrial or commercial purpose.
• Experience in Design and Built project will be an added advantage
• Strong Project Management Skills
• Good interpersonal skills and pro-active to problem solving
• Preferably process own transport and valid driving license will be an added advantage.
• Preferably process with Specialist Diploma in Construction Productivity conducted by BCA Academy will be an added advantage.

Job Position:​ Chip Design/Application Engineer

Position:​ ChipDesign/Application Engineer

Type:​ Full-time

Location:​ Singapore

Experience:​ Freshgraduates to 1-5 years of relevant experience

Education:​Bachelor’s or higher in Microelectronics, Integrated Circuit Design, ElectricalEngineering, Computer Engineering, or related fields

Job Description:​

• Participate in the digital front-end design of the company’s CPUs, processor cores, and chips, covering key R&D stages such as CPU design, core design, and chip digital front-end design.
• Responsible for hardware description language (HDL) implementation, module functional verification, logic synthesis, timing analysis, and related technical documentation.
• Support chip performance analysis, functional debugging, and application solution development, assisting customers in addressing technical issues.
• Collaborate with cross-functional teams to complete full-cycle development tasks from architectural definition to chip delivery.
• Conduct research and implementation of advanced processor architectures, low-power design, and high-performance computing technologies.

Requirements:​

Essential Qualifications:​

• Bachelor’s degree or higher in Microelectronics, Integrated Circuits, Electrical Engineering, Computer Engineering, or a related field.
• Solid foundation in digital circuits, with in-depth knowledge of Computer Architecture, Computer Organization, and Digital Circuit Design.
• Proficient in hardware description languages such as Verilog, SystemVerilog, or VHDL.
• Familiar with digital front-end design flow. Experience in module design, functional verification, or logic synthesis is preferred.
• Strong English communication skills, capable of thriving in an international team environment.

Preferred Qualifications:​

• Experience in CPU design, core design, or chip digital front-end design​ is highly advantageous.
• Familiarity with processor pipeline, memory subsystems, AMBA bus protocols, and related technologies.
• Understanding of the Universal Verification Methodology (UVM), scripting languages (Python/Tcl/Shell, etc.), or related Electronic Design Automation (EDA) tools.
• Graduates from Nanyang Technological University (NTU) or the National University of Singapore (NUS)​ will be given priority consideration.

Soft Skills:​

• Strong logical thinking, excellent problem analysis, and problem-solving abilities.
• Self-motivated, detail-oriented, and a collaborative team player.
• Passionate about chip design, eager to learn new technologies, and proactive in tackling challenges.

We Offer:​

• Competitive salary and performance-based bonus structure.
• Clear technical growth pathways and career development support.
• Participation in internationally leading chip R&D projects, with exposure to cutting-edge industry technologies.
• An open, collaborative, and innovation-driven team culture.
• Structured onboarding training and a mentorship program to support professional growth.

Responsibilities:

• Assist the project manager with on and off site meeting pertaining to the technical issues.
• Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities.
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project.
• Coordinates and check sub-contractors works being carried out, ensuring their compliances to drawings and quality requirements.
• Proven problem solving and achievements work progress according to the work schedule.
• Prepare daily records and reports to the Construction Manager.
• Site supervision and able to coordinate well with sub-contractors, RE and RTO.

Requirements:

• Candidate must at least a Bachelor’s Degree, Post Graduate Diploma in Civil Engineering or equivalent
• Min 7 years relevant experience in the related field for this position
• Be able to work independently with minimum guidance
• Preferably with experience in full building projects lifecycle
• Good team player, keen desire to learn, contribute, advance and progress with the company.

You will be responsible to design and maintain automation systems for semiconductor equipment to enhance efficiency and support data-driven decision-making.

Job Description

·         Design, implement, and maintain automation systems for semiconductor equipment, focusing on enhancing operational efficiency and minimizing downtime

·         Collect, organize, and analyse production data to identify trends, optimize processes, and support decision-making in equipment automation and engineering.

·         Develop and maintain EA systems, including EAP, RMS, and ECS.

·         Manage and maintain Fab engineering systems, including FDC, SPC, and APC.

·         Work closely with end-users to define system requirements, design, implement, and deploy new features or enhancements.

·         Design and optimize system architecture for cross-department projects, ensuring integration and alignment with overall manufacturing goals.

Requirement

·         Proficiency in Oracle SQL

·         Familiarity in programming languages such as C/C++/C#, Java, HTML5, SQL, VBA.

·         Familiarity with SECS/GEM standards and protocols for equipment communication and automation.

·         Experience in semiconductor or panel manufacturing environments is highly desirable.

Our client is one of the leader in the semicon industry, they are hiring an CPU Engineer to join them on a 12 month contract.

Job Responsibilities:

• Design and Implement ARM® based CPU on latest smartphone products.
• Developing CPU RTL model, defining timing constraint (SDC), low-power model (UPF).
• Benchmark and evaluate CPU performance under different configuration and specification.
• Design Verification on CPU functionality, low-power requirement through simulation and Machine Learning.
• Completing IC Design VLSI flow from RTL to GDSII (Synthesis, Floorplan, Automated Place&Route, Physical Verification)
• Performing Static Timing Analysis (STA) on CPU design, modeling on On-Chip Process Variation.
• Applying latest testing (DFT) technique, optimizing test coverage on CPU.
• Performing post-silicon binning technique to achieve best possible CPU performance, power and yield.

Job Requirements:

• Good Knowledge of CPU Architecture and Design.
• Passionate about boosting performance of newest ARM® CPU.
• Interest in gaining exposure to real-world IC design flows and latest semiconductor technology.

PERSOL Singapore Pte Ltd • UEN No. 200007268E • EA License No. 01C4394 •EA Registration No. R21103542 (Ling Kai Jin)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolsingapore.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Job Description

• Responsible for mechanical design and development activities for automation solutions used internally at Agilent manufacturing sites (including proposals, technical and risk assessments, concept studies, detailed designs, analyses, drawings, prototypes, tests, etc.).

• Propose mechanical architecture/outline, component placement, CAD database management, platform standardization, etc.

• Responsible for component sizing, calculations, and selection required for the automation systems.

• Serve as the key estimator for mechanical BOM cost.

• Produce detailed part and assembly 2D drawings/3D models and prepare the BOM required for procurement.

• Conduct mechanical engineering tests, characterizations, cyclic tests, and reliability tests according to requirements.

• Communicate and collaborate with internal teams (PM, marketing/internal customers, test engineers, application engineers, hardware engineers, firmware engineers, software engineers, production engineers, etc.) and external teams (suppliers, design partners, contract manufacturers, etc.).

• Coordinate and generate mechanical design–related test cases.

• Ensure mechanical designs meet automation solution requirements and project scope within the targeted timeline.

• Lead and perform root cause analysis for issues identified during development and sustaining phases.

• Comply with documentation requirements and database management as specified in the project.

• Ensure all responsible designs are delivered in accordance with corporate design standards.

• Part of the implementation and commissioning team at Agilent sites across the globe.

Qualifications

• Bachelor’s, Master’s, or PhD Degree in Mechanical or Mechatronics Engineering from an accredited college or university.

• Minimum of 8 years of relevant mechanical design experience in a factory automation environment.

• Experience in designing automation systems, mechanisms, injection‑molded plastics, part/material/component selection, extrusions, elastomeric parts, sheet‑metal parts, metal stampings, interconnects, electro‑mechanical parts, and EMI shielding.

• Strong technical, analytical, and troubleshooting skills. Demonstrates leadership, influencing, communication, and planning capabilities.

• A team player who can multitask and establish strong rapport with internal counterparts, cross‑functional team members, and suppliers.

• Able to adapt well in a dynamic working environment, eager to learn new knowledge, and capable of working independently with minimal supervision.

• Able to travel to Agilent sites across the globe based on project needs.

Company Overview

The team has more than 15 years of experience developing 1G/2.5G/5GBase-T Ethernet physical layer PHY and switch chips for data centers, enterprise networks, and gateways and has sucessfully developed multiple generations of the most competitive products.

The company is headquarted in Kunshan, and the R&D team is located in Kunshan, Suzhou, Shanghai, Beijing and Singapore.

The company is currently developing Ethernet PHY, gateway, and TSN switching chips. The target market is automotive & unpiloted driving, China's intelligent manufacturing, rail transit, and intelligent grid building industry provide domestic chips with "Independent intellectual property rights, independent and controllable.

We offer attractive salary commensurate with work experience + AWS + Bonus + Stock options

Job Responsibilities:

1. Participate in the design and realization of high-speed low-power small-area network chips.
2. Responsible for the design and verification of analog and mixed-signal circuits, particularly the CMOS signal processing circuits with profession in one of these areas, RX(e.g., AFE, ADC), TX(Serializer, DAC), PLL, LDO, ESD/EMC suppression etc.
3. Support high-level functional development and verification of analog and mix-circuit circuitry.
4. Cooperate with product definition, layout implementation, lab test and verifications.

Job Requirements:

1. Master with minimum 2-3 years' experience or PhD with > 1 years' experience in high-performance analog/mixed-signal ICs.
2. Proven experience in IC design including chip tape-out and lab evaluation of design.
3. Solid experience in Using EDA CAD tools and performing Analog Custom Layout.
4. Experience in measuring IC performance and debug of design to correlate simulations to measurements.
5. Deep understanding of fundamental, including: detailed transistor level design, device physics, control/feedback loop stability analysis.
6. Direct project experience in at least one of the following areas a plus: ADC-DAC design PLL or clock/freq generation design.
7. Knowledge & experience in Verilog coding a plus.
8. Strong communication skills and good team player.

Responsibilities:

• Infrastructure & Automation: Architect, deploy, and maintain scalable cloud infrastructure using Infrastructure as Code (IaC) methodologies.
• CI/CD Pipelines: Develop and optimize automated pipelines for testing, deployment, and release management.
• Monitoring & Reliability: Implement observability frameworks, including monitoring, logging, and alerting, to ensure system performance and uptime.
• Security & Compliance: Apply cloud security best practices, manage access controls, and maintain compliance across all environments.
• Cross-Functional Collaboration: Work closely with backend, frontend, and product teams to enable smooth deployments and reliable operations.
• Process Improvement & Mentorship: Enhance DevOps workflows, promote best practices, and mentor junior engineers.

Qualifications:

• 5+ years’ experience in DevOps or SRE, with strong skills in cloud platforms (AWS, GCP, Azure) and containerization (Docker, Kubernetes).
• Hands-on with Infrastructure as Code (Terraform, Ansible, Helm) and CI/CD tools (Jenkins, GitHub Actions, GitLab CI/CD, ArgoCD).
• Solid Linux administration, networking, and distributed systems knowledge.
• Experienced in monitoring and observability using Prometheus, Grafana, ELK/EFK, Datadog, etc.
• Skilled in automation and scripting (Python, Go, Bash) to improve system reliability and performance.
• Designs secure, scalable, fault-tolerant infrastructure with disaster recovery planning.
• Strong collaboration, ownership, and communication skills, able to mentor teams and convey technical concepts to technical and non-technical stakeholders.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd
EA License No: 20C0270
EA Personnel: Nyon Hock Sen (Aden)
EA Personnel Reg No: R24124070

THE ROLE:

AMD is seeking a talented SerDes Verification Engineer to work on verifying and validating high‑speed interfaces used in advanced SoCs and chiplet designs. The role involves building UVM/SystemVerilog testbenches, running simulations, debugging timing and protocol issues, and evaluating signal integrity, jitter, BER, and eye diagrams. Close collaboration with design and hardware teams ensures compliance with protocols such as UCIe, PCIe, and DDR, delivering reliable, high‑performance silicon.

THE PERSON:

As a SerDes Verification Engineer, you will be responsible for the verification and validation of high-speed SerDes interfaces, including testing signal integrity, performance, and protocol compliance. You will work closely with hardware and design teams to ensure that SerDes designs meet the required specifications, operating parameters, and quality standards.

KEY RESPONSIBILITIES:

• Verification of SerDes Designs: Develop and execute verification plans and testbenches for SerDes IPs (Intellectual Property) and subsystems to ensure they meet functional and performance requirements.
• Testbench Development: Design and implement verification testbenches using industry-standard verification methodologies (e.g., UVM, SystemVerilog, VHDL).
• Simulation and Debugging: Perform simulations, analyze results, and debug issues related to timing, protocol errors, and other design anomalies in SerDes blocks.
• Performance Evaluation: Evaluate and validate performance characteristics of SerDes systems including jitter, bit error rates (BER), signal integrity, eye diagrams, and other key metrics.
• Protocol Compliance Testing: Verify adherence to relevant SerDes protocols such as UCIe, PCIe, Ethernet, USB, DDR, DisplayPort, or custom protocols.
• Automated Testing: Develop automated regression tests to ensure the robustness and stability of the SerDes design over multiple versions and iterations.
• Collaboration: Work closely with the design, hardware, and software teams to troubleshoot issues, implement fixes, and verify design changes.
• Documentation: Create detailed reports and documentation on verification results, test scenarios, and issues found during testing.
• Continuous Improvement: Provide feedback for design and verification process improvements and contribute to innovation in verification strategies and methodologies.

 PREFERRED EXPERIENCE:

• Experience in SerDes verification or high-speed communication verification.
• Strong hands-on experience with verification methodologies such as UVM, SystemVerilog, or other simulation-based verification tools.
• Knowledge of high-speed serial protocols such as UCIe, PCIe, Ethernet, USB, DDR, or custom protocols.
• Experience in analyzing and interpreting signal integrity issues, jitter, BER, and eye diagrams.
• Solid understanding of SerDes architectures, link training, and equalization.
• Strong debugging skills, with the ability to work across multiple domains (timing, protocol, performance).
• Familiarity with hardware description languages (HDL) like VHDL or Verilog.
• Strong analytical, problem-solving, and communication skills.
• Experience with DDR protocol (e.g., DDR3, DDR4, DDR5) for memory interface verification.
• Understanding of UCIe protocol and its role in chiplet-to-chiplet communication.
• Experience with Python, Perl, or similar scripting languages for automation.
• Exposure to high-speed memory interface design and verification, including DDR controller IP verification.
• Ability to work in a fast-paced environment and manage multiple verification tasks.

Job Description:

· Control the progress of RFA, RFI, Shop Drawings, Technical Submissions and Equipment/Material Procurement/Fabrication/Delivery Status for on-time completion.

· Coordinate with client’s representatives, consultants, and subcontractors on all technical matters, including submission of method statement, drawings, materials, samples and work progress;

· Control site progress & installation quality as per approved Shop Drawings, Technical Submissions and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion.

· Carry out inspection of MEP works prior to concreting or subsequent construction works;

· Assist in supervising and coordinating MEP services work closely with other departments;

· Assist for submission of evaluation of progress claim, variation work to M&E Manager

· Participate in all relevant project review meetings, site meetings, design meetings, and other project relevant meetings;

Requirements:

· Diploma or Degree in Electrical/Mechanical Engineering;

· Minimum 3 years’ work experience related projects in Singapore building and construction industry;

· Electrical/Mechanical Engineering experience in HDB/LTA/MOE project is required;

· Possess strong Electrical/Mechanical knowledge with hands-on experiences;

· Strong communication skills with the ability to coordinate with site teams to execute work

Suitable candidates are encouraged to apply this position via Apply Now button or email to Career@kah.com.sg

Resident Engineer for HDB Infra project

• Degree in C&S Engineering
• Minimum 4 years of relevant experience as a civil engineer, of which at least two years shall be in supervision of infrastructure projects.
• Accredited by JAC of IES/ACES as QSS

Please indicate with expected salary and available date.

Airconditioning Engineers

1) Ability to lead and manage teams

2) Operation Supports to teams and clients

3) Self Motivated Individuals

4) Good Team Player

5) Experienece In Troubleshooting and Repair / Service of Split Type and VRF/ VRV systems

6) Valid Class 3 License

7) Minimum 5 years experience in Airconditioning Field

8) Possess field experience is a MUST

9) Strong troubleshooting and analytical skills

10) Prior experience working in MNCs Agent will be an advantage (I.E. Daikin, Mitsubishi, Toshiba)

At STMicroelectronics, we believe in the power of technology to drive innovation and make a positive impact on people, businesses, and society. As a global semiconductor company, our advanced technologies and chips form the hidden foundation of the world we live in today.

When you join ST, you will be part of a global business with more than 115 nationalities, present in 40 countries, and comprising over 50,000 diverse and dedicated creators and makers of technology around the world.

Developing technologies takes more than talent: it takes amazing people who understand collaboration and respect. People with passion and the desire to disrupt the status quo,  drive innovation, and unlock their own potential. 

Embark on a journey with us, where you can innovate for a future that we want to make smarter and greener, in a responsible and sustainable way. Our technology starts with you.

YOUR ROLE 

• Take full ownership of advanced deposition systems like Novellus Altus and Centura CVD WXZ
• Improve equipment uptime, reliability and throughput
• Diagnose and resolve fault across vacuum, RF, gas delivery and temperature control
• Identify root cause using SPC charts and fault analysis
• Work closely with process engineers in film deposition quality, thickness uniformity and defect reduction
• Identify recurring issues and implement long-term solutions
• Drive projects to enhance efficiency and reduce downtime

YOUR SKILLS & EXPERIENCES

• Degree in Electrical & Electronics, Mechanical, Mechatronics Engineering or a related field
• Minimum of  5 years  experience as an Equipment Engineer in PVD module
• Strong understanding of Chemical Vapor Deposition WXZ, WWEB process, Vacuum systems and pumps
• Experience working in Novellus Altus, Centura tools

Company Description

Block is one company built from many blocks, all united by the same purpose of economic empowerment. The blocks that form our foundational teams — People, Finance, Counsel, Information Security, Platform Infrastructure Engineering, and more — provide support and guidance at the corporate level. They work across business groups and around the globe, spanning time zones and disciplines to develop inclusive People policies, forecast finances, give legal counsel, safeguard systems, nurture new initiatives, and more. Every challenge creates possibilities, and we need different perspectives to see them all. Bring yours to Block.

Job Description

Proto is accelerating the world's transition to an open economy with products that increase access and independence for everyone. We're building Proto, hardware and software that will help decentralize bitcoin mining and enable new and innovative use cases for bitcoin mining. We're developing these products in the open - you can read more about them at mining.build. Within Proto, our Bitcoin Products team delivers the product and go-to-market strategy, software, firmware, and custom silicon needed to make our ambitious mining initiatives a reality. Come build the future of money with us!

The Foundry Interface Engineer will engage with Foundry partners/third-party vendors as well as internal teams to continuously improve the design of our ASICs. This work will include partnering with OSAT to continuously monitor and review production wafer test data, and work with standard cell level circuit designers to analyze the results.  Based on the analysis the engineer will make requests to the foundry for process fine tuning.         

You Will

• Engage with Foundry partners/third-party vendors to manage foundry PDK/DK and design library collaterals

• Guide internal IP/design teams on appropriate usage of technology attributes/offerings in accordance with product requirements (e.g., performance, power, area, and cost). 

• Collaborate with internal third-party infrastructure, customization, test-chip, methodology, and packaging and product test engineering teams for seamless execution of product bring-up and productization.

• Review and assess Foundry silicon data against SPICE/design goals and compile SPICE to Silicon gap analysis. Drive foundry partners on CIPs to improve foundry process to meet technology entitlement and product goals. 

• Work with foundry to identify potential device parameter changes to enable efficient low-voltage operation 

• Work closely with circuit designers to determine what device improvements could improve circuit performance and energy efficiency

• Work with test engineers to analyze and validate production wafer data

• Contribute to binning strategy to maximize parametric yield

You Have

• 5 + years  of post-education experience in FAB/Fabless environments, technology definition and bring-up, device/process architecture, and NPI

• Experience with foundry design kit, SPICE, DR/DRC evaluation, SPICE to Si assessment

• Experience with advanced node device physics (e.g. FinFET/GAA), backside power, product design phases

• Experience with product KPIs, DTCO, and parametric, DLY/PLY analysis/gap closure

• Understanding of low power design techniques (e.g., Vmin reduction, power gating, multi-voltage design, chip power, clock network and optimization)

• Understanding of layout effects and impact to circuit design

• Excellent statistical, data analysis, and communication skills

Nice to have experience

• Master's degree or PhD in Electrical Engineering, Physics, or other related Engineering field with emphasis on semiconductor materials/devices and device physics (not a substitute for professional experience)

• Production test development experience

• Familiar with advanced FinFET technology nodes (3nm and 2nm) 

• Familiar with PDK and device models 

Job Purpose

The Assistant Engineer, Power Maintenance works in a team to operate, maintain, and repair power system equipment in compliance with departmental quality objectives, procedures, and safety standards to ensure safe and reliable train services for commuters.

Responsibilities

• Lead and supervise a team in preventive and corrective maintenance of power system equipment

• Plan maintenance schedules and staff rosters with the Engineering Maintenance Manager

• Provide technical guidance and ensure all records, manuals, and drawings are updated

• Support engineering analysis, safety investigations, and testing activities

• Oversee repair, upgrading, and modification works; prepare completion reports

• Attend Permit-to-Work (PTW) / Permit-to-Access (PTA) requirements

• Perform rotating shift duties as required

• Carry out other related duties as assigned

Qualifications & Work Experience

• Diploma in Electrical Engineering from a recognised institution

• 2–3 years of relevant experience in electrical equipment maintenance and troubleshooting

• Experience in leading or guiding a technical team is an advantage

• Able to perform manual tasks; able to climb stairs and ladders and stand for extended periods (up to 4 hours) for inspection or fault assessment

• Able to lift tools and equipment up to 8kg

Compensation Package

1. Basic Salary: $2,400 – $3,600, Monthly Fixed Allowance: $250

2. Annual Wage Supplement (AWS), Performance Bonus & Merit Increment

3. Annual Leave: 14 days + Family Care Leave: 2 days

4. Outpatient Medical Benefits & Flexible Benefits

5. Free Public Transport: Unlimited travel on MRT and buses

Sherry Tan | R23116214 | 05C345I

Responsibilities:

• Provide technical expertise and oversee the design, installation, and maintenance of electrical systems and components
• Work closely with project teams to develop and implement electrical solutions aligned with project requirements and safety standards
• Review electrical drawings, specifications, and work plans to identify and address potential issues
• Conduct site inspections and supervise electrical contractors to ensure quality and regulatory compliance
• Diagnose and resolve electrical faults and issues during construction
• Prepare electrical reports, documentation, and other project deliverables
• Keep updated on electrical engineering codes, regulations, and industry best practices

Qualifications:

• Bachelor’s degree in Mechanical or Electrical/Electronic Engineering, or an equivalent qualification
• At least 3 years of experience as a Mechanical or Electrical Engineer within the construction industry
• Solid technical expertise in electrical systems, components, and installation practices
• Good understanding of relevant electrical engineering codes, regulations, and safety standards
• Strong analytical and troubleshooting skills
• Effective communication and teamwork abilities to collaborate with project stakeholders
• Skilled in reading and interpreting electrical drawings and schematics

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd
EA License No: 20C0270
EA Personnel: Nyon Hock Sen (Aden)
EA Personnel Reg No: R24124070

Location: Beach Road
Mon to Fri 9am to 6pm
Up $9000

Job Description

• Ethical Hacker, Pentester
• Conducted VAPT for web application
• Own and maintain cybersecurity policies, standards, and procedures in line with regulatory guidelines.
• Conduct regular risk assessments and manage the technology risk register while ensuring remediation actions are tracked.
• Ensure compliance with data protection regulations, including performing data protection impact assessments.
• Implement and oversee security monitoring across various infrastructures, including cloud and endpoint devices.
• Monitor, triage, and respond to security alerts and incidents; maintain and test the incident response plan
• Review and harden system configurations, identity & access management, and network segmentation models.

Requirements

• Diploma/Degree in Information Technology, Business, Engineering, or equivalent.
• At least 3-5 years relevant experience
• CREST CPSA or CRT certified
• CWES or OSCP certified

Only shortlisted candidates will be notified

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at emily.fong@atomrecruit.com

Emily Fong
Senior Talent Specialist 

Atomrecruit Pte. Ltd. 

MOM EA License No.: 15C7443 

EA Personnel Reg No.: R1768368

Woodlands

Mon to Fri 8.30am to 5.30pm

Salary up $3800-$5000

Have AWS & bonus

Job Description

• Review quote requests in detail and ensure all quotes for Module line are provided within the set Lead time
• Follow up with manufacturing for New Product Introduction and ensure they are manufactured as per spec and delivered on time.
• Follow up with Manufacturing and ensure effective implementation.
• Co-ordinate with Planners and ensure material is received on time for new products
• Develop, evaluate, and improve manufacturing methods continuously
• Involve in Failure analysis for any customer returns
• Drives suppliers for cost reduction along with SCM team
• Perform other duties as requested by managemen

Requirement

• Bachelor’s degree / Post Graduate Diploma in Industrial / Mechanical / Mechatronic / Electromechanical Engineering or equivalent
• At least 2 years relevant working experience
• Able to understand mechanical drawing

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at emily.fong@atomrecruit.com

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Lead design and development of enterprise applications using Java (Spring, Spring Boot).

Architect and optimize database solutions using MS SQL Server and Oracle.

Define coding standards, conduct code reviews, and mentor development teams.

Translate business requirements into scalable technical solutions.

Manage end-to-end SDLC ensuring timely and high-quality delivery.

Identify and mitigate technical risks across projects.

Collaborate with cross-functional teams including QA, infra, and business stakeholders.

Strong expertise in Java 8+, microservices, REST APIs, Hibernate/JPA, and CI/CD.

5–7 years experience with at least 2 years in a technical leadership role.

Exposure to cloud (AWS/Azure/GCP), DevOps, and containerization (Docker/Kubernetes) preferred.

Working hours: Mon-Fri, Office hours
Location: Punggol
Job Type: Contract (Renewable basis)

Key Responsibilities

• Design, engineer, and automate the lifecycle of OpenShift clusters, treating infrastructure as code
• Develop automation for cluster provisioning, upgrades, and scaling using tools such as Terraform, Ansible, or Python
• Implement and manage core OpenShift components including OVN-Kubernetes networking and OpenShift Data Foundation (ODF)
• Enhance platform reliability, scalability, and performance to ensure high availability
• Implement GitOps workflows for cluster configuration and deployment management
• Collaborate with cross-functional teams to support secure and efficient cloud operations

Requirements

• Min. 4 years of relevant experience in platform engineering / cloud / DevOps
• Strong hands-on experience with Red Hat OpenShift or Kubernetes
• Proficiency in scripting and automation (Bash and/or Python)
• Experience with Infrastructure as Code (Terraform, Ansible)
• Understanding of container networking (SDN, OVN) and storage (Ceph/ODF)
• Familiarity with GitOps practices and tools

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.

• Delete personal data as it is not required at this application stage.

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Elaine Wong (Zoe) l Outsourcing Team

ScienTec Consulting Pte Ltd - 11C5781

Job Description:

• Design, develop, and optimize active thermalcontrol systems, including pumped fluid loops, cold plates, and heatexchangers, to meet performance and reliability requirements.
• Perform thermal and flow analysis usingSolidWorks Flow Simulation and SolidWorks Simulation to validate designs andsupport product development.
• Support prototyping, testing, and validation ofthermal systems, including the use of thermal sensors, heaters, TECs, andthermal interface materials.
• Collaborate with cross-functional teams todefine thermal requirements, interpret basic control logic, and ensuremanufacturability through precision fabrication or additive manufacturingmethods.
• Troubleshoot thermal performance issues anddrive continuous improvement for applications in semiconductor, space, defence,or other high-precision engineering environments.

Requirements:

• Degree in Mechanical / Thermal Engineering or equivalent
• 3+ years experience in active thermal control systems (pumped fluid loops, cold plates, heat exchangers)
• Proficiency in SolidWorks Flow Simulation + SolidWorks Simulation
• Able to interpret and specify basic control logic (no full coding required, but scripting in Python/MATLAB is a plus)
• Knowledge of thermal test platforms, thermal sensors, heaters, TEC, thermal interface materials (TIM)
• Knowledge of space/defence/semiconductor thermal requirements
• Knowledge within the semiconductor testing solution will be highly preferred
• Familiar with fluid selection (dielectric coolants, glycols, PFAS-free alternatives)
• Familiar with precision fabrication such as CNC Milling & lathe machining
• Experience with SINDA/FLUINT or GT-SUITE would be a plus point
• Knowledge of prototyping using precision fabrication and/or additive manufacturing.
• Strong analytical and problem-solving skills.
• Good written and verbal communication skills
• Proficiency in SolidWorks will be a must
• Eligibility to work and relocate in Singapore will be a plus

At STMicroelectronics, we believe in the power of technology to drive innovation and make a positive impact on people, businesses, and society. As a global semiconductor company, our advanced technologies and chips form the hidden foundation of the world we live in today.

When you join ST, you will be part of a global business with more than 115 nationalities, present in 40 countries, and comprising over 50,000 diverse and dedicated creators and makers of technology around the world.

Developing technologies takes more than talent: it takes amazing people who understand collaboration and respect. People with passion and the desire to disrupt the status quo,  drive innovation, and unlock their own potential. 

Embark on a journey with us, where you can innovate for a future that we want to make smarter and greener, in a responsible and sustainable way. Our technology starts with you.

Key Responsibilities 

1. Equipment Ownership & Uptime

• Serve as primary owner for assigned tools, such as Trymax and Axcelis tools
• Maintain and continuously improve OEE, MTBF, and MTTR targets.
• Develop and maintain equipment health monitoring and baseline control (SPC, FDC, fault codes, alarms).
• Drive daily tool performance reviews, documenting issues, actions, and recovery plans.

2. Maintenance & Troubleshooting

• Plan, execute, and optimize preventive maintenance (PM) activities according to OEM recommendations and fab strategies.
• Perform complex troubleshooting on electrical, mechanical, vacuum, RF, gas delivery, and software subsystems.
• Lead root cause analysis (RCA) for chronic and high‑impact issues using structured methods (8D, Fishbone, 5‑Why, etc.).
• Coordinate and supervise vendor field service engineers (FSEs) and contractors during major interventions, upgrades, and rebuilds.

3. Process / Equipment Interaction

• Work closely with process engineering to ensure equipment performance supports CD, profile, uniformity, selectivity, and defectivity requirements.
• Analyze tool logs, SPC charts, metrology data, and wafer maps to correlate equipment conditions with yield and parametric performance.
• Support process qualifications, chamber swaps, hardware changes, and recipe releases.
• Ensure correct implementation and maintenance of chamber matching between AMAT and TEL tools.

4. Continuous Improvement & Cost Reduction

• Identify and implement improvement projects to increase uptime, extend parts lifetime, and reduce operating cost.
• Optimize consumables usage and spare parts strategy (buffer stock, repair vs. replace, refurbishment plans).
• Participate in or lead CIP / Lean / Six Sigma projects for productivity and quality enhancement.
• Support capacity upgrades (chamber additions, throughput improvement, software enhancements).

5. Documentation, Procedure & Training

• Create and maintain standard operating procedures (SOPs), maintenance procedures, and troubleshooting guides for AMAT SuperE, AMAT DPS.
• Document all events, alarms, interventions, and changes in the equipment history system (EHS/CMMS).
• Provide technical training and coaching to equipment technicians, junior engineers, and shift personnel.
• Ensure compliance with change management process for hardware, software, and recipe modifications.

6. Safety & Compliance

• Ensure all activities follow EHS regulations, company safety rules, and cleanroom protocols.
• Conduct and support risk assessments, LOTO procedures, and safety audits for gas, chemical, RF, and high‑voltage systems.
• Support compliance with ISO/Automotive/Quality Management Systems as applicable.

Job Requirements

• Bachelor’s Degree in Electrical & Electronics Engineering, Materials Science Engineering, Chemical Engineering or equivalent
• Min 5 years of relevant work experience in Semiconductor Etch area, familiar with Etch Equipment (Trymax, Axcelis)
• Good analytical and creative problem-solving skills with a keen eye to details
• High degree of interpersonal skills and able to work both independently and with cross-functional teams
• Knowledge of SPC, FMEA, 8D methodologies.