Total 796 Senior Executive level Engineering job vacancies

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades.

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including coordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

Job Description:

• Analyse SPC chart. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyse split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on pass down to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Manufacturing can have more flexibility.
• Perform process matching between equipment to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self-audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide feedback/ training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics /Microelectronics / Chemical Process Engineering / Chemistry / Physics related major
• Min 2 years working experience in Diffusion (implant, Furnace and WET/Clean Tech) Process.
• Good interpersonal skills and is an excellent team player
• Logical thinking capability and good analytical skill
• Highly level of integrity with good ownership and accountability
• Passion for the semiconductor / manufacturing industry

Roles and Responsibilities:

•  Ensure timely submission of process deliverables, including PFDs, P&IDs, hydraulic profiles, equipment sizing, HAZOP study reports, etc

•  Lead in the P&ID (Piping and Instrumentation Diagrams) drawings submissions utilizing Bentley OPPID, PFD (Process Flow Diagrams), and mass balance calculations

•  Lead in RO Membrane design selection and process.

·   Participate and coordinate in HAZOP (Hazard and Operability) studies for the overall plant and its systems/sub-systems.

•  Integrate equipment and material capabilities to meet process module and technology specifications.

•  Taking the lead in discussion with clients on planning and execution of the testing and commissioning for successful project completion.

•   Analyze and review current processes to streamline them for improvement, productivity enhancement, sequence optimization, unit improvement, and troubleshooting of the plant during testing and commissioning.

•   Attend technical meetings with clients, vendors, sub-contractors, and internal project teams.

•  Collaborate with various disciplines engineers to ensure all interfacing issues are aligned and resolved to mitigate engineering rework.

·   Any other ad-hoc engineering duties to support the Project Manager for successful execution of the project.

We are seeking a highly skilled Senior Process Integration Engineer to lead the development and optimization of Indium Phosphide (InP) based Edge Emitting Lasers (EELs). In this role, you will be the bridge between design and manufacturing, ensuring that our high-performance optoelectronic devices transition from concept to high-volume production with world-class reliability and yield.

You’ll be working at the frontier of photonics, handling complex material systems and sophisticated fabrication sequences to power the next generation of optical communications and sensing technologies.

Core Responsibilities

• Process Flow Ownership: Design, implement, and manage the full end-to-end fabrication flow for InP-based EELs (e.g., Fabry-Pérot, DFB, and DBR lasers).
• Yield & Performance Optimization: Identify and resolve integration bottlenecks. Use Statistical Process Control (SPC) and Design of Experiments (DOE) to improve device electro-optical performance (threshold current, wall-plug efficiency, and slope efficiency).
• Cross-Functional Collaboration: Partner with Epitaxy (MOCVD) teams to optimize regrowth interfaces and with the Design team to ensure Layout-to-Mask integrity.
• Advanced Fabrication Management: Oversee critical steps including dry/wet etching (ICP/RIE), dielectric deposition (PECVD/ALD), metallization etc.
• Failure Analysis: Coordinate Root Cause Analysis (RCA) on fabrication failures using SEM, TEM, and FIB diagnostics to drive continuous improvement.

Key Technical Requirements

• Materials Expertise: Deep understanding of III-V compound semiconductors, specifically the GaAs/InP/InGaAsP/material systems.
• Device Physics: Strong grasp of semiconductor laser physics
• Fabrication Proficiency: Hands-on experience or good understanding on photolithography, etching, thin film
• Characterization:  Understanding laser characterization data and correlating results back to specific process modules.

Qualifications

• Education: PhD or Master’s degree in Electrical Engineering, Physics, Materials Science, or a related field.
• Experience: 5+ years of direct experience in III-V semiconductor processing
• Software: Proficiency in JMP, or Python for data analysis;
• Mindset: A methodical troubleshooter who thrives in a cleanroom environment and enjoys the "detective work" of process integration.

About STMicroelectronics

At ST, we are 48,000 creators and makers of semiconductor technologies mastering the semiconductor supply chain with state-of-the-art manufacturing facilities. An integrated device manufacturer, we work with more than 200,000 customers and thousands of partners to design and build products,solutions, and ecosystems that address their challenges and opportunities, and the need to support a more sustainable world. Our technologies enable smarter mobility, more efficient power and energy management, and the wide-scale deployment of cloud-connected autonomous things. We are on track to be carbon neutral in all direct and indirect emissions (scopes 1 and 2), product transportation, business travel, and employee commuting emissions (our scope 3focus), and to achieve our 100% renewable electricity sourcing goal by the end of 2027.

Further information can be found at www.st.com

YOUR ROLE 

1. Set-up process recipe of newly setup process equipment.
2. Perform qualification for new process equipment and new process recipe.
3. Evaluate the new processes and make a series of process characterization.
4. Perform inline troubleshooting and qualification in daily operation.
5. Follow Gemba activity to identify opportunity of improvement in operation and quality aspects.

YOUR SKILLS & EXPERIENCES

• Degree in engineering of materials, chemistry
• Knowledge of excel, office suite.
• English language proficiency
• at least 5 years experience in wafer fab process engineering, and having at least 3 years experience in DCVD process; preferred experienced in DCVD process tool type in Applied materials Centura and Producer.
• Strong CVD process technical knowledge background, with experience to develop and optimize new process recipe
• Master SPC, FMEA and 8D problem solving methodology.

As a Senior/Staff LithographyProcess Engineer, you will lead the development and optimization of lithographyprocesses for both Fan-In and Fan-Out eWLB (Embedded Wafer Level Ball GridArray) packaging technologies. You will be responsible for driving keyengineering projects such as yield improvement, cost reduction, and processtransfers across global manufacturing sites.

Key Responsibilities:

• Own and optimize lithography processes for PI, PR, and other patterning layers in both FO and FI eWLB.
• Manage photolithography tools (GHI/i-line stepper, coat/develop tracks, etc.), including recipe setup and troubleshooting.
• Lead cross-functional projects focused on cost reduction, process robustness, and NPI transfer.
• Lead process improvements to enhance yield, throughput, and cost efficiency.
• Evaluate and implement new lithography materials (PSPI, PR) and tools.
• Define and maintain process documentation (SOP, OCAP, FMEA, SPC) and training programs.
• Collaborate with equipment vendors, materials suppliers, and internal engineering teams to evaluate and qualify new tools or materials.
• Design and perform DOE, root cause analysis, and statistical data analysis (e.g., JMP, Camline, etc.).
• Support daily fab operations with issue resolution and yield improvement initiatives.
• Mentor junior engineers and provide technical direction to the litho team.
•  

Qualifications:

• Bachelor’s or Master’s degree in Engineering (Materials, Chemical, EE, or related field).
• 5+ years hands-on experience in photolithography process, preferably in advanced packaging (eWLB, WLP, FO-PLP).
• Strong knowledge of lithography tooling, including exposure systems and coater/developer tracks.
• Skilled in project management, process transfer, and cost/yield improvement.
• Familiar with SPC, FMEA, and problem-solving methodologies.
• Excellent communication skills, with proven ability to engage with both internal stakeholders and external customers.
• Fluent in both English and Chinese. (This role will need to liaise with customers and counterpart from China)

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition

• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology

• Establish process parameters for a variety of semiconductor equipment to ensure line stability

• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics

• Demonstrated experience of at least 5-7 years in semiconductor foundry dry etch module process

• 22/28 nanometer and below advance technology nodes experience is highly desirable

• Strong understanding of process development, optimization and troubleshooting.

• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer

• Ability to analyze complex process issues, identify root causes, and implement effective solutions

• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred

• Able to commit shift work

Introduction:

Process integration in development, optimization, and qualification of semiconductor devices/processes to meet performance requirements.

Your Job:

• Process integration in development, optimization, and qualification of semiconductor devices/processes to meet performance requirements.

• DOE design, execution, and analysis of results.

• Partner process module engineers to improve device/yield performance.

• Own and drive technical process problem solving.

• Interact with internal & external customers and respond to technical queries.

• Establish new technology design rules, test structures and test methodologies.

• Innovate new methods of continuous process/device improvement.

Other Responsibilities:

Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs

Required Qualifications

• Education - Degree/master's in electrical, Electronics Engineering or equivalent.

• 4 year’s relevant experience for Degree.

  Wafer Fab process integration experience is required.

Preferred Qualifications:

• Knowledge of semiconductor device physics and/or RF fundamentals (e.g. S-parameters) is a plus.

• Independent, resourceful, with a positive attitude toward continuous learning & knowledge acquisition.

• Excellent analytical and optimization skills.

• Great interpersonal skills and ability to work with cross-functional teams.

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

Responsibilities

• Lead the development of mass balances, hydraulic profiles (P&IDs) and process flow diagrams for water treatment plants.

• Conducting process modelling, simulations and pilot testing to validate new technologies and process improvements

• Size and specify process equipment, such as pumps, blowers, tanks and etc. to meet system performance and reliability requirements

• Evaluate supplier proposals, quotations to ensure compliance with technical and commercial requirements

• Collaborate with cross-functional teams to plan and execute projects

• Provide onsite technical support during project execution and lead troubleshooting of operational issues

• Lead plant testing and commissioning.

• Prepare commissioning plans, SOPs, O&M manuals and training materials.

• Support proposal development and tender preparation.

• Mentor junior engineers and designers.

• Execute other ad-hoc tasks as assigned to support project and team objectives

Requirement

• Degree in Chemical Engineering, Environmental, Civil Engineering or a related technical discipline

• 8+ years' experience as a Process Engineer or Senior Process Engineer, preferably in the water treatment industry

• Proficient in AutoCAD

• Strong problem-solving, analytical and critical thinking skills

• Excellent interpersonal and communication skills

The Process engineer plays a vital role in D2W hybrid bonding process optimization, yield improvement and to develop innovating process flow or path finding. PE Works closely between internal Hybrid team, partner and Customers.

• Responsible for process development & CIP’s to improve the product yield
• To conduct DOE’s and experimental process trails and data analysis
• Define new process flow for customer products and run internal feasibilities
• Provides technical subject matter expertise in the area process developments
• Understands the Hybrid bonding upstream & downstream process flow to relate actual Hybrid bonding or Fusion bonding yield related topics
• Process optimization and data analysis to improve the process responses hybrid bonding and annealing
• Supports SOP, technical documentation and product operating manual writing activities and publish BKM process flow
• Builds-up technical know-how on product/problem solving via structured knowledge transfer between the on-site support team
• Machine and Technical Support
• Machine operation and application/product setup
• Prepares and executes customer demo feasibilities and recommend the process flow
• Coordinates and provides technical solutions / problems solving on customer process related issues in collaboration with Field issues
• Investigates process issues at customer site and supports Engineering team

Education

• Master’s in mechanical/electrical/Electronics /Physics or PHD

Work experience

• Minimum 5 years relevant experience in C2W or W2W hybrid bonding and Front end wafer fab/backend process
• Significant practical experience in solving process issues and process optimizations including new process setup
• Hands-on experience in semiconductor front end or backend Process and equipment’s including defectivity & yield engineering

Expertise and methodology

• Good in MS-Office, data analysis SW like JMP, Matlab
• Hands-on Process Development Expertise and able to share the Problem Statement in crystal clear

EA License : 02C3423

EA Personnel : R22108699

Job Responsibilities:

• Develop, validate, and maintain special process procedures (e.g., heat treatment, surface treatment, coatings, welding, brazing)
• Perform process capability studies and continuous improvement initiatives
• Ensure compliance with aerospace standards and customer requirements
• Assist the Manager in day-to-day process monitoring and production requirement
• Perform other duties and responsibilities, as assigned

Job Requirements:

• Minimum 3 years of relevant experience in an Aerospace or Manufacturing environment

Interestedapplicants can send their detailed resumes to janelui@recruitexpress.com.sgor call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg.No. 199601303W || EA Licence No. 99C4599

Job Responsibilities:

• Develop, validate, and maintain special process procedures (e.g., heat treatment, surface treatment, coatings, welding, brazing)
• Perform process capability studies and continuous improvement initiatives
• Ensure compliance with aerospace standards and customer requirements
• Assist the Manager in day-to-day process monitoring and production requirement
• Perform other duties and responsibilities, as assigned

Job Requirements:

• Minimum 3 years of relevant experience in an Aerospace or Manufacturing environment

Interestedapplicants can send their detailed resumes to janelui@recruitexpress.com.sgor call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg.No. 199601303W || EA Licence No. 99C4599

Key Responsibilities:

• Lead the architecture design (e.g. memory cells, select transistors, and peripheral devices), process integration, electrical characterization, modeling and simulation, failure analysis for 3D NAND devices.
• Design and execute DoE, analyze the impact of process variations on device performance and reliability (such as durability and data retention), and propose improvement solutions.
• Collaborate with the process development team to assess new device architectures, driving technology iteration.
• Write detailed technical reports and support customers or internal teams in resolving related technical issues.

Required Qualifications:

1. Education: Master's degree or above
2. Major: Microelectronics, physics, material science & engineering, chemistry;
3. Other Requirements:

• 8+ years of semiconductor device work experience, 3+ years of 3D NAND work experience.
• In-depth knowledge of 3D NAND device physics, familiar with its principles, failure modes, and reliability mechanisms.
• Troubleshooting, and problem-solving capabilities, with experience in successfully improving device performance or yield.
• Familiar with advanced semiconductor manufacturing processes and integration flows.
• Strong cross-team communication and collaboration skills.

Job's mission

As a Senior Process Engineer in Advanced Packaging, you will bring your PhD research experience into an industrial R&D environment, contributing to the development of semiconductor process technologies used in next-generation devices. Working closely with experienced engineers and scientists, you will translate scientific insight into scalable, manufacturable solutions. Your work will directly support ASM’s mission to enable the chips that power today’s most advanced technologies.

What you will be working on

• Contribute to the research, development, and optimization of semiconductor processes for Advanced Packaging, including thin-film deposition (ALD, PECVD, PVD, ECP) and surface preparation technologies.
• Design, execute, and analyze experiments using DOE-based approaches, supported by senior technical experts.
• Perform materials and process characterization to evaluate film quality, reliability, and performance.
• Analyze experimental data and clearly document results in technical reports and internal presentations.
• Collaborate with cross-functional teams across R&D, process engineering, and applications.
• Support troubleshooting of process or equipment issues in laboratory and pilot environments.
• Participate in technology reviews and contribute ideas to process improvement and innovation initiatives.
• Learn industry best practices for transitioning processes from development into customer and manufacturing environments.

What we are looking for

• PhD in Chemical Engineering, Materials Science, Physics, Mechanical Engineering, Electrical Engineering,
• Hands-on research experience with thin-film deposition processes such as ALD, CVD, PECVD, or PVD.
• Strong experimental background, including designing experiments and analyzing complex data sets.
• Solid problem-solving and analytical skills, with a structured approach to research challenges.
• Clear written and verbal communication skills, with the ability to explain technical concepts to diverse audiences.
• Curiosity, initiative, and motivation to apply academic research in an industrial setting.
• Strong understanding of electro/mechanical equipment and software systems

What sets you apart

• Research experience related to advanced packaging, interconnects, or semiconductor manufacturing
• Familiarity with statistical methods, DOE tools, or data modeling techniques.
• Experience with materials characterization methods such as SEM, TEM, XRD, or ellipsometry.
• Exposure to cross-disciplinary or collaborative research environments.
• Interest in long-term growth within semiconductor technology development and process engineering.

Apply today to be part of what’s next.

We make the tech that enables the chips in devices which improve lives around the world. We do this with an eye to the future, pushing the boundaries of what’s possible through cutting-edge innovation, and driving the next wave of technological breakthroughs that shape how we live, work, and connect.

To learn more about ASM, find us at asm.com and on LinkedIn, Facebook, Instagram, X and YouTube.

ASM is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, age, nationality, social or ethnic origin, sexual orientation, gender, gender identify or expression, marital status, pregnancy, political affiliation, disability, genetic information, veteran status, or any other characteristic protected by law.

Job's mission

As a Senior Process Engineer at ASM, you will drive the development of high‑thermal‑conductivity thin films that enable next generation high‑performance computing (HPC) and advanced packaging. You’ll lead a team of experts working on advanced thermal films compatible with rapidly evolving demands of advanced packaging and heterogenous integration, leveraging ALD/PEALD, CVD/PECVD, and related technologies to turn forward looking roadmaps into manufacturable solutions. By translating demanding customer requirements into breakthrough materials and processes, you’ll help position ASM at the forefront of thermal management for heterogenous integration of advanced logic, foundry, and memory devices.

What you will be working on

• Contribute to research development areas focused on high thermal conductivity thin films for advanced packaging and HPC applications, fostering innovation, technical excellence, and collaboration
• Own the roadmap to develop thermal films or materials aligned to customer performance and integration requirements.
• Leverage ASM’s ALD/PEALD, CVD/PECVD, and surface preparation expertise to design, optimize, and qualify high thermal conductivity materials and stacks for use in advanced devices and packages.
• Drive high thermal conductivity thin film development, including process optimization for deposition rate, uniformity, materials properties, morphology and bondability.
• Define, influence, and drive new hardware requirements and development in close collaboration with hardware and software engineering teams to meet advanced on high thermal conductivity process specifications and integration schemes.
• Collaborate closely with customers, Account Technology Directors, Product Management, and Business Development to align on high thermal conductivity materials roadmaps with customer device and packaging strategies.
• Partner with corporate and global R&D organizations to deliver new materials, surface preparation schemes, and applications that support critical technology inflections in thermal management and advanced packaging.
• Ensure generation and protection of intellectual property and technical publications.
• Stay at the forefront of state‑of‑the‑art semiconductor processing and thermal management technologies, maintaining strong technical communication with industry peers and key customers.
• Communicate at a highly technical level with end customers to build trust in ASM’s ability to solve their most advanced thermal and device challenges.

What we are looking for

• Ph.D. degree in Physics, Physical Chemistry, Chemical Engineering, Materials Science, or a related field
• Minimum 10 years of experience in the semiconductor or semiconductor capital equipment industry
• Proven track record of developing and delivering new semiconductor process technologies to customers
• Strong working knowledge of semiconductor device physics and manufacturing processes
• Demonstrated credibility working with semiconductor fab managers, senior engineers, and executive stakeholders
• Ability to operate effectively in a fast-paced, results-oriented, and highly competitive environment
• Excellent communication skills in English; ability to collaborate in a global R&D environment
• Willingness to travel approximately 10–20%

What sets you apart

• Deep expertise in ALD/PEALD, CVD/PECVD, including RF and/or microwave based
• Experience developing high‑thermal‑conductivity materials
• Track record generating patents or publications in thin‑film or thermal‑materials innovation
• Strong reputation for building high-performance, collaborative engineering cultures
• Experience influencing product direction through process innovation, materials engineering, and hardware collaboration
• Recognized thought leadership through patents, publications, or industry contributions
• Ability to balance technical innovation, customer satisfaction, and business priorities

Key responsibilities:

• Provide IT support operation on daily basis, include below activities:

o IT asset management (include the hardware and software) – manage all company IT asset with proper traceability record;

o Support HR on all employee on-board/off-board process including IT training;

o Provide all IT system setup and admin work; (file control, VPN setup and special software admin work support);

o IT Level 1 helpdesk support to all company staff include remote user from worldwide, it could be PC issue, office printer, phone system or network related issues;

o Troubleshooting AD/DC, Exchange server, File Server and Application server issues and provide a solution.

o Troubleshoot and configure the firewall, router and switch when issues arises.

o Escalate to 3rd party IT support vendor if issue couldn’t be fixed within same day, coordinate with IT support vendor resolve issues within TAT, document down for all IT issues and solutions in return document;

o Liaise with IT vendor management, include IT hardware/software quotation, costing, PR process and make proposal if any recommend system tools).

• System maintenance work on regular basis, include below activities:

o All System backup (File server backup, NAS storage backup, offline backup activity), verify all system backup files are working properly;

o Coordinate department head on storage Clean up include File server, SharePoint and NetApp;

o Monitor Server room temperature and humidity, and make sure all server related equipment (E.g.: UPS) are working under good condition;

o Pulse check all on server, router and firewall log and flag out all abnormal activities immediately;

o Regular update antivirus related tools and window related system patches.

• IT governance and direction:

o Maintain all IT related record (contract, agreement, software authorization, etc.) and regularly updates or renew on time;

o Keep updating and release new IT P&P (Policy & Procedure), BCP(Business Continuity Plan) and DRP(Disaster Recovery Plan);

o Working with finance and country IT support on IT budgeting yearly basis and review it quarterly;

o Assist external or internal auditor on IT compliance or ISO related audit;

o Evaluate vendor proposal and provide justification to management.

• IT related projects management (Ad Hoc or on-going) and provide weekly basis updates to management):

o IT project plan, budgeting and proposal;

o IT project deployment after project approved;

o IT project verification and provide necessary training to end user;

o IT project sign off and documentation.

Additional responsibilities:

• Any reasonable task assigned by management and deemed to be within the individual’s capabilities to ensure smooth running of the business.
• As this is an evolving business, ongoing change is an integral part of the position. Management will liaise with the individual on any fundamental change to work practices. The individual is required to embrace and adopt any change to working practices.

Knowledge and skill requirements:

• Diploma in IT related discipline with at least 3-years relevant experience in IT support or maintenance experience;
• Hands on IT support working experience include Desktop/Laptop support, Printer, Lan/Wan, Router, Switches, Firewall Support;
• MCSE in Windows Server and RHCSA in Linux server or equivalent hands on working experience;
• CGEIT preferred or IT governance working experience in IT policy or security;
• International IT project management experience;
• SAP working experience good to have;
• Able to remotely support regional IT issue (CN, TW), Both English and Mandarin read and write required (to be able to liaise with Mandarin speaking associates on tasks assigned by management to ensure smooth running of the business);
• Good negotiation/communication skill with IT contractor or external IT supplier

JOB SCOPE & JOB RESPONSIBILITIES

• Familiar with RO, demin, mixed bed, ultra-pure, neutralization, chemical preciptation (including HF, heavy metal, backgrind etc.), biological treatment etc. and specialty processes.
• Develop process design packages: heat & mass balances; PFDs; P&IDs; process calculations.
• Perform equipment sizing and prepare specification (pumps, blowers, air compressors, vessels, tanks) and materials selection; define instrumentation and control philosophy with cause-and-effect matrices.
• Liaise with OEMs/vendors to validate technologies and recommend best-fit solutions based on performance, compliance, schedule, and total cost of ownership (CAPEX+OPEX); drive technical clarifications and value engineering.
• Prepare and review equipment lists, line lists, valve list and load lists as required.
• Prepare and check process datasheets for RFQs; evaluate vendor proposals for compliance with technical specs, codes, and regulations; lead technical clarifications.
• Prepare technical proposal according to client's RFQs. Provide solution to clarifications and prepare cost estimation.
• Plan and participate in HAZOP and related reviews, coordinate action close-out.
• Produce/peer-review submission documentation; support project FAT/SAT, plant start-up, performance testing, process optimization, and handover.
• Compile/author ITP/IP and IOM manuals; interface with multidisciplinary teams (C&S, MEICA, controls) and construction/site teams.

JOB REQUIREMENTS

• Degree in Chemical or Environmental Engineering (or equivalent)
• Standards & codes: Familiar with relevant international standards/codes and onshore/offshore practices
• Proficiency with MS Office
• Working knowledge of AFT Fathom (hydraulic analysis) and AutoCAD Plant 3D (P&ID) is an advantage

WORK EXPERIENCES

• Process Engineer: More than 2 years in a similar scope, preferably in Oil & Gas, Power, or Water/Wastewater
• Senior Process Engineer: More than 5 years with demonstrated leadership in design reviews, HAZOP facilitation/close-out, vendor management and mentoring junior engineers.

As a PDE Central Yield Enhancement (YE) Engineer within Package Development Engineering (PDE), you will own and execute yield learning and improvement activities across advanced package technologies during HBM and NCG New Product Introduction (NPI). Your scope includes yield monitoring, excursion response, and yield stabilization, with an emphasis on rapid learning, early risk identification, and scalable solutions. 

This role plays a key part in driving robust yield performance from first silicon through NPI ramp and early HVM, partnering closely with Process Integration (PI), MRDA, Process Engineering, Assembly/Test Manufacturing and Quality teams. You will act as a hands‑on yield owner for NPI builds, translating data into actionable insights, driving fast learning cycles, early risk detection, and leading disciplined yield recovery. 

Job Responsibilities 

Yield Loss Accounted For 

• Account for HBM NPI builds across PWF, Assembly, and test through defect breakdown and PFA submission to understand fail mode 

• Own and execute assigned Central YE responsibilities for HBM NPI program, work closely with PI to identify defects that is coming from their area to brainstorm for CIP 

• Learn NPI processes, phase gates, and yield best practices 

• Assist in maintaining yield dashboards and trackers. Support PI/PE/RDA in identifying and transforming processing data to account/ breakdown a yield loss 

Yield Deviation Control 

• Analyze and report on yield deviation issue and trigger action from PI, PE or RDA 

• Support block run and partial conversion build yield analysis to early detect any impact on yield 

• Work closely with PCS team to identify SPC or FDC charts to put into YLR dashboard for shift left monitoring 

Yield Improvement Opportunities 

• Brainstorm with staff from other departments for improvement opportunities and propose to PI 

• Design and implement new solutions, including hotspot analytics, to improve the effectiveness of the automated defense line system. 

• Utilize software tool like Auto-diagnostics to find yield improvement opportunities 

Integrating Artificial Intelligence 

• Integrates AI-assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgement and complying with organizational standards and legal requirements 

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI-enabled enhancements within one’s scope of work 

Job Requirements 

• Bachelor's or Master's degree in Electrical/ Electronics Engineering/ Computer Engineering / Computer Science with 2 to 5 years of experience in semiconductor industry, specifically involving yield analysis, defect/root cause investigation, or data-driven process optimization in advanced memory (HBM, DRAM, NAND) or high-volume semiconductor packaging. 

• Proficiency in Python (e.g., Pandas, NumPy) and SQL for semiconductor manufacturing data analysis, with hands-on experience developing interactive dashboards and visual reports using tools (including Spotfire and Power BI/Tableau) to translate large manufacturing datasets into actionable yield and process improvement insights. 

• Demonstrated experience building automated reporting workflows, data pipelines, or process automation solutions using Python scripting or RPA tools within a semiconductor manufacturing environment, with the ability to drive cross-functional decisions across manufacturing, process integration, and engineering teams in the semiconductor industry. 

• Ability to apply baseline digital fluency and role-appropriate AI literacy to use AI-enabled tools responsibly and effectively for research, analysis, content creation, problem-solving, operational tasks, and achieving business outcomes 

Embody Micron’s Core Values 

• People – Respect, develop, and empower others. 

• Innovation – Drive continuous improvement and breakthrough thinking. 

• Tenacity – Show grit and determination. 

• Collaboration – Build trust and foster teamwork. 

• Customer Focus – Deliver excellence and value 

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

• Co-ordinate / Execute new  product offloads plan
• Interface with customer on product offloads and provide assessment and information on test capabilities and providing resolutions to barriers/constraints
• Performs required test correlation, evaluation, and test characterization on new product offloads, and shall  communicate to customer the test results or if any- test correlation issues and resolutions
• Generate Test Setup Specification based on customer’s test requirements for production to support the product
• Identify andclose gaps in product and test cell performance to meet organization goals
• Evaluate and recommend process change/s forimprovements to help improve yield, quality, and cycle time
•  Provide required test support needs by Customers /Resident Engineers
• Sustain test program, hardware and major setupissues in mass production

Required Experience and Qualifications (Required knowledge, skills and experience---however acquired):

• Strong ability to develop and modify test programs
• Degree in Electronics / Electrical Engineering or its equivalent
• Diploma in engineering or its equivalent with minimum 5 years of working experience

Summary Of position:

The incumbent is required to re-engineer existing systems, provide solutions to integrate multiple platforms, provide technical support to maintenance team, support system testing and commissioning and compile operation manuals for systems and be involved in Customer Care Pre/Post-variation order activities, Incumbent will also be tasked to take on and be accountable for keys projects and provide the required support from start to completion stage.

Responsibilities

· Perform off site survey with clients to capture essential requirements

· Re-engineer existing systems through analysing and identifying areas for modifications / enhancements

· Provide solutions to integrate multiple platforms and hardware e.g. CCTV, security card access

· Compile operation manuals by liaising with principal suppliers and maintenance teams on performance of systems on site

· Provide on-site technical support for variation orders received by Projects Delivery and Customer Care department

· Support maintenance testing and commissioning by drafting specific tests and commissioning plans

· Resolve complex technical issues by coordinating with both internal team and external vendors to meet client requirements

· Provide guidance to a team of young engineers by providing hands on training and instructions

· Take on and be accountable for keys projects and provide the required support from start to completion stage

Responsibilities:

• Carry out design review of C&S and geotechnical design and analysis for coastal structures such as quay wall, port, jetty, revetment and land reclamation etc. for local and/or oversea projects
• Assist the Design Manager to coordinate, manage, and oversee all design related matters including:
• Ensure design coordination, document submission from Contractor is in accordance with the time schedule
• Ensure Instructions issued by Employers are co-ordinated with the Contractors
• Study and review of submissions from the Contractors
• Resolve design discrepancies or technical conflicts which may arise from the Contractor while carrying out the construction works
• Co-ordinate with Contract and Construction team and provide necessary information or correspondences on changes which deviate from the contract and may lead to time and cost implications.
• Chair all design coordination meetings.
• Assist the Project Lead / Project Manager to carry out:
• Review on plan for Site investigation and result interpretation,
• Review on C&S, environmental and geotechnical design and analysis for coastal structures such as quay wall, port, jetty, revetment and land reclamation (i.e. deep and shallow foundation, temporary and permanent retaining system, soil improvement, instrumentation, etc.)
• Managing sub-contracts (i.e. soil investigation contract, Accredited Checker contract, biodiversity contract etc.)
• Managing main contracts
• Supervise both design and/or site work
• Prepare technical reports and submission to Clients and Authorities (i.e. GIR, concept design, detailed design, risk assessment, ground improvement, etc.)
• Ensure all engineering works comply with all relevant statutory standards, regulations and Codes of Practice
• Engage and manage stakeholders, such as clients, design team, site team and other relevant parties
• Support on pursue project: assist in tender submission
• Assist in other Coastal department activities i.e: beach clean up, sports day, etc

Qualifications:

• Bachelor/Master Degree in Civil / Environmental Engineering from recognised and reputable university
• Minimum 5 years of relevant civil engineering experience in large scale infrastructure/reclamation projects

Required Skills:

• Possess the skill, knowledge and ability to manage and co-ordinate all the design activities
• Strong written and verbal communication skills in English
• Team player and able to multi-task
• Discipline, self-motivated and resourceful
• Experience in contract administration will be advantageous
• Well-versed in Microsoft Office Suite of Software (e.g. Word, PowerPoint, Excel etc)
• Proficiency in engineering software such as AutoCAD, Civil 3D, Plaxis etc

Job Description

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Summary of Role

This position is within GlobalFoundries RF Design Enablement team with focus on ground rule development and Silicon Validation (GRV).The Ground Rule Validation (GRV) is part of the Design Manual Engineering (DME)/Design Enablement team that creates and supports the Design Rules based on technological, manufacturing and business considerations. The Design Manual itself is one of the key components of the Process Design Kits (PDKs) provided by GF.

These Design Rules (or Ground Rules) must be carefully engineered and qualified to ensure the competitiveness and manufacturability of GF technologies. This qualification is performed by the Ground Rule Validation team.

The Design Manual Engineering (DME) team is a very dynamic and international team of experts, involved in development projects with the US, Germany, and Singapore manufacturing sites.

The team is also a very active player in GF innovation and patent submissions. We cover a broad range of projects, which offers many opportunities for new technical solutions and ideas.

Responsibilities

• Work closely with Program Managers, Manufacturing teams (Process Integration), Customer engineers, Benchmarking teams to identify and understand the key technological features that need to be controlled and secured by Design Rules.

• Create layout Designs of Experiment (DoE) and design Test Structures that will be delivered on Test vehicles.

• Perform rigorous Silicon data analysis and efficiently communicate the conclusions to Design Rule engineers, as well as Integration teams.

• Champion modifications of process or Design Rules based on data to optimize GlobalFoundries’ technology portfolio.

• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements, and programs.

• After taking the GRV training curriculum, the new team member will start with the technologies manufactured in Fab9/8 (US) or Singapore.

• His/her primary role will also include the GRV validation of the transfer technologies to ensure the full compatibility of the current Design Rules with the respective fabrication line.

Required Qualifications: 

• Bachelors in Electrical Engineering, Materials Science, Solid State Physics, or other relevant engineering disciplines.  

• Strong data analysis, data mining and problem-solving skills.  

• Understanding of semiconductor process fabrication flow, nanofabrication, solid state and semiconductor device physics and design of experiments (DOE) methodology 

• Strong interpersonal skills; team player; able to work effectively in a dynamic, fast-paced environment. Strong written and oral communications skills 

• Familiarity with EDA tools such as Cadence Virtuoso Virtuoso Schematic Editor, Virtuoso Layout Suite, Calibre (DRC, LVS) is a big plus.

Preferred Qualifications 

• MS in Electrical Engineering, Electrical Computer, Solid State Physics, Materials Science, or other relevant engineering discipline plus 0-2 years of Semiconductor industry experience in device, process integration or unit process areas preferred. 

• PhD in Electrical Engineering, Electrical Computer, Solid State Physics, Materials Science, or other relevant engineering discipline

• Demonstrated ability to solve complex, non-recurring problems combined with strong initiative and creativity resulting in high degree of innovation.  

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

Job Description

We are seeking an experienced M&E Engineer / Senior M&E Engineer to support the execution of building services projects across commercial and industrial developments. The successful candidate will be involved in the full project lifecycle — from engineering coordination and design review through to site supervision and commissioning.

Candidates with experience in Singapore building M&E projects are strongly encouraged to apply.

Responsibilities

• Prepare, review, and coordinate M&E engineering drawings, technical submissions, and specifications
• Liaise with clients, consultants, subcontractors, and suppliers on project execution and technical matters
• Monitor and supervise site progress, ensuring compliance with project specifications, safety, and quality standards
• Supervise installation, testing, commissioning, and troubleshooting of M&E systems
• Ensure adherence to Singapore authority requirements including BCA, SCDF, PUB, and EMA guidelines
• Support project meetings, documentation, material submissions, and progress reporting
• Assist in resolving technical and site coordination issues

Job Requirements

• Diploma or Degree in Mechanical Engineering, Electrical Engineering, Building Services, or equivalent
• Minimum 6–7 years of relevant M&E building project experience in Singapore
• Familiar with ACMV, electrical power and lighting, fire protection and alarm, plumbing and sanitary, and ELV systems
• Proficient in AutoCAD; familiarity with BIM and CSD coordination preferred
• Sound knowledge of local codes of practice and authority submission requirements
• Good communication and coordination skills; able to work independently in a fast-paced environment

Additional Information

• Candidates with stronger experience and qualifications will be considered for a Senior M&E Engineer position
• Working location: Jurong East
• Salary: SGD 4,500 – 6,500/month, commensurate with qualifications and experience

Only shortlisted candidates will be notified.

Recruit Express Services Pte Ltd.
EA Licence No.: 13C6614
Liz Ooi Li Chen
EA Registration No.: R1104561

Job requirement:

• Ability to perform first level investigation out of control situation and line excursions, abnormal lot/tool judgement due to inline OOC and OOS from SPC Chart.
• Process condition optimization.
• Work closely with equipment and production to ensure key module objectives are met.
• Evaluation to improve process margin.
• Cost reduction projects.
• Ensure safety, discipline and housekeeping compliance by all personnel.
• Analyze different types of defects and provide clear problem description with maintenance counterparts on troubleshooting.

Job requirement:

• Diploma in Electrical/Electronics/Chemistry/Microelectronics/Engineering or equivalent.
• Relevant working experience in Photo Process semiconductor front-end industry
• Willing to work in cleanroom environment.
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications