Total 378 Art / Design / Entertainment job vacancies

Engineering:

o The job holder will dedicate about one half of his/her time to Test development and characterization of Advanced devices for communication (either Optical or RF&mmwave)

o Within this scope, the job holder will also be in a position to promote his/her design background to bring improvements towards industrial Testability through DFT-like approach.

o Eventually the job holder will be involved in the Industrialization phase of the product they will be working on in development to discover the Industrial / Manufacturing completing their full view over Product Life cycle (from Design to Mass Production)

o In this Scope, the Job holder will be reporting to RFOC/Product Engineering/ASIA PAC Dev and Support Team.

RF Architecture and Design:

o The job holder will dedicate the other half of his / her time to RF design activities inside the RFOC organization. For this part of activity, the job holder will be under the supervision of RFOC/HWR&D/RF&mmWave competence centre.

o The responsibility will span from contributing to an advance RF communication standard developed with key industry partners, including Asian partners, to supporting two product families especially for the Asian market.

o The RF specialist will also contribute to the ST technical community in their area of expertise.

Key Responsibilities:

• Engineering responsibilities

o Contribute to Sicoya OAK (or similar) product development through Test Spec analysis, Product Test strategy optimization and then Test development, implementation and debug.

o Contribute to DFT approach analysis and propose optimization by leveraging his Design knowledge

o Acquire autonomy and test program development, debug and validation to support efficient industrial and optimized test solution

• RF design responsibilities:

o Contribute to NF60 standardization activities through architecture and design studies.

o Become a direct contributor to specific NF60 standard chapters, participate to NF60 committee regular reviews.

o Product support for ST60 product line and ST64 NBA frequency generator.

Requirements:

• Minimum education requirement PhD or post-doctorate in RF and analog design

• Minimum 5 to 10 years of experience in the silicon manufacturing industry

• Excellent knowledge of Bi-CMOS, CMOS and FD-SOI technologies

• Proven expertise in analog and digital design, RF and millimetre-Wave architecture and design

• Knowledgeable in DFT, test development and industrial testing

• Skilled in programming and simulation languages, including Python, Matlab and CAD development suites such as Cadence-Virtuoso

• $3,500 basic + bonus + AWS

• 5 days work week

• Career Growth in the Construction & Engineering Industry

• Stable Industry with Consistent Demand
  

Our Client, with a market presence in Europe, America, and Asia, is inviting qualified candidates to fill the position as Assistant Mechanical Engineer.

RESPONSIBILITIES:

• Create detailed 2D drawings and 3D models using SolidWorks based on engineering requirements and concepts.

• Prepare manufacturing drawings, including GD&T, tolerances, BOM, and material specifications.

• Work closely with stakeholders, project managers, and cross-functional teams to refine designs and ensure manufacturability and compliance with standards.

• Update and maintain drawing revisions, documentation, and CAD data management.

• Support prototyping, testing, and production by providing accurate technical drawings and resolving design issues.

• Demonstrate a hands-on attitude by supporting prototype builds, performing basic assembly checks, and troubleshooting design issues directly on parts or assemblies.
  
  

REQUIREMENTS:

• Diploma in Mechanical Engineering or related discipline

• 1 year relevant experience

• Good knowledge, ability, and competency in SolidWorks

• Good understanding of mechanical design and technical drawings

• Proficient in 2D and 3D CAD software (SolidWorks)

• Detail-oriented with strong technical and problem-solving skills

• Good team player with a positive learning attitude
  

OTHER INFORMATION:

• Location: Tampines

• Working Days/Hours: 5 days / 9am - 6.30pm

• Salary: $3,500 + bonus + AWS (salary will commensurate according to experience & qualifications)

• The Company strives to achieve employee satisfaction and provides conducive working environment, attractive incentives and remuneration to all staff.

Job Summary

Join Ardor as a founding Design Engineer in Singapore, creating seamless UX for a versatile AI-driven cloud platform that automates complex workflows and delivers impactful outcomes across diverse domains.

Full remote role, no office required.

Responsibilities

• Design and deliver user interfaces using Figma to create intuitive, user-centered designs for complex AI-driven workflows
• Develop and ship front-end components with React to implement seamless, responsive user experiences
• Apply strong design judgment and attention to detail to craft polished, high-quality product interfaces
• Navigate ambiguity and complex system requirements to iterate and refine design solutions effectively
• Collaborate within a founding team environment to drive product innovation and solve challenging UX problems

Preferred competencies and qualifications

• Experience working in early-stage startup or founding team settings
• Passion for high craftsmanship and design excellence
• Ability to adapt quickly to evolving product needs and chaotic environments

A few things Ardor done:

• Enterprise: spun up its own service to reach into the company's VPN-protected network, pulled the data, and stood up a Metabase instance wired to it — fully under Ardor's control. Dashboards, SQL, ad-hoc questions, plus code, infra, and support work — all now one prompt away. With a single integration a company gets a company-level AI agent that's trivial to roll out — just grant access the way you already do. And at the same time it's a personal agent for every employee, covering every domain, always in context of what, where, and how.
• PhD verifying computational chemistry papers — weeks of work collapsed into an hour
• Non-coder shipping a 3-tier production app on Kubernetes (React + FastAPI + Postgres)
• Aerospace engineer turning a napkin math model into working MATLAB code
• Guitarist learning a new song — Ardor built a chord trainer tailored to the track
• Founder needing market insights — just ran the research end-to-end

Same platform. Same agent.

Agentic systems have wild emergent effects — every new tool is a non-linear jump in what they can do.

Tools aren't the interface. Outcomes are.

Designing for a product that can solve such a wide range of tasks is the hardest — and most interesting — UX problem I can think of. I need someone who can make it feel effortless.

Other Information

• Location: Singapore remote
• Singapore PR/Citizen

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

We are seeking a highly skilled and experienced Senior Design Engineer to join our team, a leading firm specialising in the design and manufacture of waste management and municipal equipment. This role offers the opportunity to work on innovative projects that make a real impact on communities and the environment.

DUTIES & RESPONSIBILITIES

Design and Development

• Lead the design and development of waste management and municipal equipment, ensuring all products meet safety, quality, and performance standards.

• Utilize advanced CAD software to create detailed 2D, 3D models and technical drawings.

• Conduct feasibility studies and risk assessments for new designs and modifications.

• Construct and maintain accurate BOMs and revision control systems, building a standard parts directory, material library and producing company engineering standards.

Project Management

• Oversee projects from concept through to production, managing timelines, budgets, and resources.

• Coordinate with cross-functional teams including manufacturing, procurement, and quality assurance to ensure seamless project execution.

• Provide technical leadership and mentoring to junior engineers and design team members.

Innovation and Improvement

• Drive innovation by researching and integrating new technologies and materials to enhance product performance and sustainability.

• Identify opportunities for process improvements and cost reductions while maintaining product integrity.

Compliance and Standards

• Ensure all designs comply with relevant industry standards, regulations, and safety requirements.

• Prepare and review technical documentation and reports, including compliance certifications and testing protocols.

Client and Stakeholder Engagement:

• Liaise with clients, suppliers, and stakeholders to understand requirements and provide technical expertise and support.

• Present design concepts and project updates to clients and senior management.

REQUIREMENTS

• Degree in Mechanical Engineering, Industrial Design, Mechatronic or a related field. Professional engineering qualifications (e.g., Chartered Engineer) preferred.

• Minimum of 5 years’ experience in design engineering, with a proven track record in waste management or municipal equipment. Proficient in mechanical structural calculation.

• Proficiency in CAD software (e.g., SolidWorks, AutoCAD), and knowledge of engineering principles related to mechanical design and fabrication.

• Strong project management skills with experience in leading cross-functional teams and managing complex projects. LTA submission, compliance with safety regulations. Engineering support and correspondence to vehicular projects.

• Excellent problem-solving abilities and a keen eye for detail.

• Strong verbal and written communication skills, with the ability to present technical information clearly and effectively.

• Ability to work in a fast-paced environment and adapt to changing priorities and requirements.

Our esteemed client, an established MNC, is searching for a Design & Coordination Engineer:

Job Responsibilities:

• Coordinate and review design drawings with consultants to ensure compliance with project and authority requirements.
• Identify and resolve technical issues during design and construction phases.
• Plan, monitor, and report on shop drawing production progress.
• Prepare technical submissions, including materials, construction methods, and C&S shop drawings.
• Liaise closely with Architectural and M&E teams as well as relevant authorities to resolve design and site-related matters.
• Supervise and guide a team of BIM Modelers for the production of coordinated shop drawings and Concrete Body Plans.

Job Requirements:

• Degree in Civil or Structural Engineering or equivalent qualification.
• Minimum 3 years of relevant experience in design coordination, preferably with a main contractor.
• Registration as a Professional Engineer (PE) with the Professional Engineers Board will be an advantage.
• Strong understanding of design standards.
• Independent, analytical, and self-motivated, with strong teamwork and communication skills.

Additional Information:

• Salary: Up to SGD 7,000 +VB (1 - 2 Months)
• Working Location: Redhill
• Working Hours: 5 Days Work, 8am - 5pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

tstar.recruit.pte.ltd+candidate+j633wy3w5@mail.manatal.com

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

Your Job

As a Senior Engineer, Die Design, your primary responsibility is to lead and participate in the design and development process from concept to delivery. You will provide the best value working design solutions for technical problems. Collaboration with Product Designers, Procurement, Buyers, Stamping, and vendors is essential to meet project launch objectives.

Our Team

You will be reporting to the Principal Engineer, Die Design. In this role, you will frequently engage with external vendors and suppliers to ensure smooth processes and achieve project goals.

What You Will Do

• Lead the design and development from concept to delivery, providing effective solutions to technical challenges.
• Collaborate with various stakeholders, including Product Designers and Procurement, to achieve project objectives.
• Formulate the scope of works and develop design philosophies based on product design.
• Provide ballpark quotes and schedules for MIE during project launches.
• Highlight product design issues during design reviews and FMEAs.
• Conduct tooling design reviews using design guidelines and FMEAs.
• Design and develop tooling to support new product launches, ramp-ups, and FA closures until mass production.
• Collaborate closely with Toolmakers on FOT and Die Qualification.
• Work with procurement for quotations and vendor selection.
• Attend design review and progress meetings, acting as the primary point of contact for vendors.
• Coordinate with external vendors for design reviews, schedules, specifications, FA closures, and other technical issues.
• Drive new technologies and methodologies to effectively reduce lead time, cost, and quality.
• Improve tooling for QN, QAP, and yield loss reductions.
• Perform other duties as assigned by Management.

Who You Are (Basic Qualifications)

• NTC 2 or Diploma in Engineering or equivalent.
• Minimum of 8 years of experience in die debugging, fabrication, and building of progressive dies.
• 8 years of experience in the tool and die industry.
• Proficient in Microsoft Office, AutoCAD.
• Proficient in Siemen NX.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Job Description :

• Responsible for the execution of civil and structural design involving the preparation of calculations and review of structural design drawings in accordance to customers' specifications, applicable codes, standards and other generally accepted practices.
• Assist in producing tender specifications and design requirements for calling of tender contracts.
• Undertake detailed design of buildings and civil infrastructures.
• Work with Qualified Person (QP) to develop design scheme for civil and structural works.
• Involve in project planning, implementation and close monitoring of projects.
• Project coordination including submission to local authorities and liaison during the construction stage.
• Liaise with clients, consultants and authorities on technical matters.

Requirements :

• Candidates must possess at least degree in Civil Engineering (preferably recognised by PE Board).
• Engineers with minimum 1 years' experience in relevant engineering design work. Conversant with latest design codes and authority requirements (Codes of practice, directives, etc.).
• With good attitude towards work and timeline.

We are seeking a Detailed Design Engineer / Engineering Coordinator to support the engineering, design coordination, and project execution of industrial water, wastewater, and ultra-pure water treatment facilities. The successful candidate will work closely with multidisciplinary engineering teams to develop detailed design deliverables, coordinate engineering activities, and support project execution from design through commissioning.

Candidates with experience in water treatment, wastewater treatment, desalination, reuse water, industrial utilities, or ultra-pure water (UPW) systems will be highly preferred.

Key Responsibilities

Engineering & Design

• Prepare and develop detailed engineering deliverables for water and wastewater treatment projects in accordance with project specifications, client requirements, and industry standards.
• Prepare and coordinate:P&ID DrawingsFabrication DrawingsEquipment Layout DrawingsPipe Routing DrawingsEquipment Modelling Drawings
• Perform material take-offs (MTO) and support engineering quantity verification.
• Ensure engineering deliverables are completed accurately and within project schedules.

Engineering Coordination

• Coordinate with in-house and overseas engineering and design teams to ensure timely completion of engineering deliverables.
• Interface with process, mechanical, piping, electrical, instrumentation, procurement, and construction teams throughout the project lifecycle.
• Track engineering progress and assist in resolving design and technical issues.
• Support engineering document control and design review activities.

Project Support

• Participate in value engineering initiatives to improve project efficiency and reduce project costs.
• Support tendering and proposal activities by providing engineering and design input.
• Provide engineering support to Project Management, Construction, and Commissioning Teams as required.
• Assist with technical clarifications, design revisions, and as-built documentation.

Qualifications & Requirements

• Diploma, Bachelor's Degree, or equivalent qualification in Engineering or a related discipline.
• Minimum 3 years of experience in detailed engineering, design, or engineering coordination roles.
• Experience in water treatment, wastewater treatment, ultra-pure water (UPW), industrial utilities, or process plant projects is highly preferred.
• Strong understanding of engineering drawings, piping layouts, equipment layouts, and 3D modelling.
• Highly motivated, organized, and capable of working under pressure in a fast-paced project environment.
• Strong communication and coordination skills.

Software Skills

• Autodesk Construction Cloud
• AutoCAD
• AutoCAD Plant 3D
• REVIT
• Google Drive
• Google Meet
• Microsoft SharePoint
• Microsoft Teams
• Navisworks

Advantageous

• SolidWorks
• SAP

• $3,500 basic + bonus + AWS

• 5 days work week

• Career Growth in the Construction & Engineering Industry

• Stable Industry with Consistent Demand
  

Our Client, with a market presence in Europe, America, and Asia, is inviting qualified candidates to fill the position as Assistant Mechanical Engineer.

RESPONSIBILITIES:

• Create detailed 2D drawings and 3D models using SolidWorks based on engineering requirements and concepts.

• Prepare manufacturing drawings, including GD&T, tolerances, BOM, and material specifications.

• Work closely with stakeholders, project managers, and cross-functional teams to refine designs and ensure manufacturability and compliance with standards.

• Update and maintain drawing revisions, documentation, and CAD data management.

• Support prototyping, testing, and production by providing accurate technical drawings and resolving design issues.

• Demonstrate a hands-on attitude by supporting prototype builds, performing basic assembly checks, and troubleshooting design issues directly on parts or assemblies.
  
  

REQUIREMENTS:

• Diploma in Mechanical Engineering or related discipline

• 1 year relevant experience

• Good knowledge, ability, and competency in SolidWorks

• Good understanding of mechanical design and technical drawings

• Proficient in 2D and 3D CAD software (SolidWorks)

• Detail-oriented with strong technical and problem-solving skills

• Good team player with a positive learning attitude
  

OTHER INFORMATION:

• Location: Tampines

• Working Days/Hours: 5 days / 9am - 6.30pm

• Salary: $3,500 + bonus + AWS (salary will commensurate according to experience & qualifications)

• The Company strives to achieve employee satisfaction and provides conducive working environment, attractive incentives and remuneration to all staff.

Design, calculations and CAD/ REVIT Drafting work for Mechanical and ELV Installation for Building Services.

Attend technical meetings and co-ordinate with Project Engineers.

Job Requirements

Diploma/Bachelor Degree in Electrical/Mechanical Engineering from recognized polytechnics/university

Hands on experience in AUTOCAD

BIM experience will be an advantage.

1) Perform Design work for Electrical/Mechanical & ELV Installation for Building services

2) Include calculations and CAD/ REVIT Drafting work for Electrical/Mechanical & ELV Installation for Building Services.

3) Attend technical meetings of the projects assigned to you

4) Co-ordinate with the Project Engineers of the projects that you are assigned to.calculations and CAD Drafting work for Electrical/Mechanical Installation for Building Services.

Attend technical meetings and co-ordinate with Project Engineers.

Job Responsibilities

1. Responsible for the design, simulation, and verification of analog circuits

2. Perform layout floor plan simulations and ensure optimization

3. Collaborate with layout engineers to finalize circuit design work

4. Prepare comprehensive design documentation and maintain detailed records throughout project lifecycle

5. Coordinate with application, product, and test engineers to ensure successful mass production of the product

Job Requirements

1. Bachelor's degree or above in Microelectronics, Electronic Engineering, Communication Engineering, or related fields

2. Solid foundational knowledge in analog circuit design principles

3. Hands-on experience in designing one or more of the following circuits: LDO, Oscillator, IO, ESD, ADC, DAC, PLL, and filters

4. Proficiency in at least one programming language such as Python, MATLAB, or C

5. Strong problem-solving skills and good communication and learning abilities.

6. Passion for analog circuit design, with a strong interest in advancing knowledge and skills in this field

Design, calculations and CAD/ REVIT Drafting work for Mechanical and ELV Installation for Building Services.

Attend technical meetings and co-ordinate with Project Engineers.

Job Requirements

Diploma/Bachelor Degree in Electrical/Mechanical Engineering from recognized polytechnics/university

Hands on experience in AUTOCAD

BIM experience will be an advantage.

1) Perform Design work for Electrical/Mechanical & ELV Installation for Building services

2) Include calculations and CAD/ REVIT Drafting work for Electrical/Mechanical & ELV Installation for Building Services.

3) Attend technical meetings of the projects assigned to you

4) Co-ordinate with the Project Engineers of the projects that you are assigned to.calculations and CAD Drafting work for Electrical/Mechanical Installation for Building Services.

Attend technical meetings and co-ordinate with Project Engineers.

Overview

We are seeking an experienced Solution Architect (.NET) to lead the design, modernization, and implementation of enterprise-scale applications based on microservices architecture. The successful candidate will drive architecture decisions, establish development standards, and provide hands-on technical leadership to ensure scalable, secure, and cloud-native solutions aligned with enterprise and government technology standards.

Key Responsibilities

Architecture & Solution Design

• Define and establish target-state microservices architecture for .NET applications aligned with enterprise architecture, cloud strategies, and security requirements.
• Lead architecture design and validation for pilot applications to refine and standardize the microservices approach.
• Evaluate and recommend suitable technology stacks, frameworks, integration patterns, and deployment strategies.
• Design service decomposition, domain boundaries, APIs, and communication patterns to enable scalable and modular systems.
• Develop reference architectures, design standards, reusable frameworks, and best practices for adoption across multiple applications.
• Assess deployment approaches, including GovTech platforms (e.g., Workpal) and independent cloud-hosted environments.
• Provide architectural guidance and technical leadership to development teams supporting new and existing applications.

Application Development & Technical Leadership

• Lead hands-on development of core and complex application components for pilot and strategic systems.
• Conduct architecture reviews, code reviews, design walkthroughs, and technical troubleshooting activities.
• Establish and enforce software engineering best practices, including secure coding, testing strategies, and CI/CD practices.
• Support modernization initiatives by guiding development teams in adopting modern architecture patterns and technology stacks.
• Mentor developers and technical teams on architecture principles, design standards, and engineering excellence.

Quality, Security & Governance

• Ensure solutions comply with enterprise security standards, including authentication, authorization, and secure application design practices.
• Drive adoption of DevOps and cloud-native engineering practices.
• Promote maintainability, reliability, scalability, and operational excellence across applications.
• Collaborate with stakeholders to balance business objectives, technical feasibility, and long-term sustainability.

Requirements

Education & Certifications

• Bachelor's Degree in Computer Science, Software Engineering, Information Technology, or a related discipline.
• Relevant professional certifications are highly preferred (e.g., Azure Solutions Architect, Microsoft Azure certifications, cloud architecture certifications).

Experience

• Minimum 7 years of experience in software architecture and solution design.
• Minimum 4 years of experience leading architecture initiatives for enterprise-scale modern applications.
• Proven track record delivering microservices-based, cloud-native, or application modernization projects in production environments.
• Experience working within large-scale enterprise or government technology environments is advantageous.

Technical Skills

• Strong expertise in .NET 8 / .NET Core, C#, and modern application development frameworks.
• Experience with frontend technologies such as JavaScript/Node.js and modern web frameworks.
• Strong knowledge of SQL and database design principles.
• Hands-on experience designing and implementing microservices architectures.
• Familiarity with cloud-native architecture and Azure services, including event-driven design patterns.

Strong understanding of:

• Authentication and authorization frameworks
• API design and integration patterns
• Application security best practices
• DevOps and CI/CD pipelines
• Containerization and modern deployment approaches
• Familiarity with IM8 and government technology standards is advantageous.

Soft Skills

• Strong analytical and problem-solving capabilities.
• Excellent stakeholder management and communication skills.
• Ability to translate business requirements into scalable technical solutions.
• Strong presentation and influencing skills, with the ability to engage both technical and non-technical stakeholders.
• Highly organized, self-driven, and capable of leading cross-functional teams and initiatives.

Senior Solution Architect (Enterprise Software)

Our Client is looking for an Senior Solution Architect to define, lead, and evolve the architectural strategy of complex, enterprise solution grade applications. You will be instrumental in ensuring the scalability, security, performance, and maintainability of our software solutions, while also guiding development teams and influencing technology direction.

Requirements:

• Lead end-to-end enterprise solution design and implementation.
• Strong in enterprise solution and application architectural design and implementation.
• Develop architecture blueprints, high-level design, and technology stack recommendations that balance scalability, security, and cost efficiency.
• Define and maintain software architecture standards, reusable components, and development guidelines.
• Good in DevSecOps and Software/ Application Architect.

Requirements:

• Experience in Enterprise Software and Application design and implementation.
• Experience in Large-scale Public sector or Mission-critical projects
• Agile, DevSecOps, and CI/CD practices with practical experience integrating software quality, automation, and Cloud infrastructure.
• Software performance tuning, scalability, security compliance, and resilience engineering.
• Good knowledge of Cloud Platform (GCC, AWS, Azure)
• Possess Government domain experience (preferred).
• Min. 8 years of Enterprise Software Solution Design and Implementation experience.
• Lead cross-functional technical teams and manage complex stakeholder expectations.
• Singaporean Only

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : kelvin@starcareerconsulting.com

Kelvin Lee(Reg. No. R1872625)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

THE ROLE:

You will be responsible for testing, validating, and optimizing optical transceivers to ensure high performance and reliability in fiber optic communication systems. This role involves working closely with design teams to develop validation methodologies and improve product quality.

THE PERSON

You are a detail-oriented engineer with a strong foundation in optical communication systems and a passion for innovation. You thrive in collaborative environments and are driven to solve complex technical challenges. Your hands-on experience with optical components and high-speed link validation makes you a valuable contributor to our cutting-edge silicon design team.

KEY RESPONSIBILITIES:

• You will develop and execute validation plans for optical transceivers and related components.
• Perform calibration, characterization, and testing of electro-optic transceivers.
• Set up and maintain automated test platforms for optical transceiver validation.
• Analyze test results and troubleshoot performance issues.
• Collaborate with cross-functional teams to improve product design and reliability.
• Document validation processes and generate technical reports.
• Stay updated with industry trends and advancements in optical communication technologies.

PREFERRED EXPERIENCE:

• Hands on optical components testing and high-speed links validation experiences. 
• Technical Skills: Strong knowledge of optical communication systems and fiber optics.
• Experience with Python, C, MATLAB, and data analysis.
• Ability to debug and validate hardware/electronics.
• Soft Skills: Strong analytical and problem-solving abilities.
• Excellent communication and teamwork skills.
• Experience with Silicon Photonics and high-speed optical interconnects.
• Knowledge of optical packaging and characterization techniques.

ACADEMIC CREDENTIALS:

• Bachelor's/Master’s/Ph.D. in Electrical Engineering, Optical Communications, or related fields.

LOCATION:

Singapore

about the job

• Create electrical designs that strictly adhere to safety, quality, and project specifications. Generate, maintain, and revise electrical drawings and technical documentation.
• Carefully select appropriate electrical components and cabling, balancing physical layout constraints, sizing, and overall cost.
• Act as a technical resource for the operations team during the assembly and testing phases. Lead troubleshooting efforts for equipment-related electrical issues and ensure complete resolution.
• Adhere to standard engineering change control procedures when making or documenting electrical part replacements.

Jobs requirement

• Degree in Electrical and Electronics Engineering
• Minimum of five years of proven experience in equipment /semiconductor machine electrical design.
• Proficiency in using 2D CAD systems for electrical drafting.
• Must possess a strong understanding of industrial control systems, particularly concerning strict grounding requirements.

If you are interested in the position , kindly send your CVs to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Mechanical Design Engineer - Precision Engineering

• Office Location: Kaki Bukit Singapore
• Working Hours: Mon – Fri 8am – 5.30pm
• Monthly Salary: Basic + AWS + Variable Bonus (VB)
• Employment Type: Full time, Permanent Contract

Company Overview
A well‑established precision engineering group with decades of experience in the industry. The company specializes in designing and manufacturing high‑precision parts and tools that support advanced manufacturing processes, including semiconductor assembly, testing, and wafer fabrication. With a strong reputation for quality and innovation, it serves global customers across multiple high‑tech sectors.

Responsibility

• Design and develop semiconductor components, tooling, and related parts to deliver robust and compliant solutions.
• Create and review detailed 2D/3D CAD models, drawings, specifications, and schematics to meet performance, quality, cost, and schedule requirements.
• Support prototyping, testing, and validation activities; analyze results and implement design improvements.
• Participate in project planning, execution, and cross‑functional coordination, ensuring alignment with engineering and production teams.
• Contribute to design reviews, quality assurance processes, and provide technical support for existing products and production issues.
• Maintain accurate design documentation, test reports, and project records while driving continuous improvement and innovation in engineering practices.

Requirement

• Minimum Degree in Mechanical or related Engineering which are recognized by relevant authority
• Minimum 2 years of experience in designing molds, precision parts, and tooling for the semiconductor industry
• Familiar with SolidWorks, AutoCAD or equivalent
• Knowledge of precision component and tooling design for semiconductor applications
• Candidate who can start immediately or within short notice will be preferred

We regret to inform you that only shortlisted applicants will be notified.
Recruit Lync Pte Ltd | EA License Number: 22C1000
Chen Hoe Nam | EA Personnel License: R25158678

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

KEY RESPONSIBILITIES:

• Contribute to IP selection and architecture definition; create functional specifications.
• Perform PPA evaluation and optimization.Develop RTL for functional blocks/units with architectural features and timing constraints, targeting synthesis and APR.
• Support debugging across RTL simulation, gate-level, and post-layout simulations.
• Conduct quality checks using FE EDA tools such as Spyglass.lint, CDC, RDC, etc.
• Take ownership of the full project lifecycle, from architecture to production.

PREFERRED EXPERIENCE:

• > 10 years of hands-on experience in digital frontend design.
• Strong proficiency in Verilog/VHDL.
• Hands-on experience with logic FE tools (e.g., VCS, Verdi, Spyglass, DC).
• Experience in Static Timing Analysis is a strong plus.
• Prefer candidates with experience implementing advanced-process chips.
• Familiarity with low-power design and power simulation preferred.
• Proficiency in TCL, Perl, or similar scripting languages is a plus.
• Prior experience with multiple tape-outs and chip bring-up is preferred.
• Leadership or management experience is an advantage.

ACADEMIC CREDENTIALS:

• Bachelor or Masters Degree in Electronic Engineering, with years relevant work experience.

~ 5 days work week, Monday - Friday 9am - 6pm

~ Location: Suntec

~ No experience is welcome to apply! On the job training is provided

~ 6 months contract and convertible to permanent based on performance

Our client is a solar energy solution provider in Singapore

Responsibilities:

• Responsible for operational level understanding of the requirement of the client/customer, Site Visits, Site feasibility & Solar Systems Design and complete execution. Able to check site feasibility and provide the best suitable option for enhancing suitability.
• Designing of arrangements of the solar panels for Rooftop & Ground Mounted PV system including layouts, Single line diagram (SLD), schematic diagrams, calculation of sizing and BOQ of material. Highly experienced with Autocad.
• Drawing/Document submission/approvals, scheduling, Factory inspections, proving the guaranteed prepared a generalized check list for review of all standard. End to end execution of solar projects (Rooftop & Ground Mounted) and Service Support.
• Familiar with PV simulation software such as PVsyst and Helioscope.
• In addition to the above-mentioned duties and responsibilities, any other assignments given occasionally or daily by the immediate reporting officer

Requirements:

• Possesses minimum Degree in Electrical Engineering/Renewable energy-related field
• Minimum 1.5 year of experience in handling solar projects preferred
• No experience is welcome to apply! On the job training is provided
• Has knowledge in electrical design concepts

HOW TO APPLY:
Interested applicants, please click on “Apply Now” or email to ref32@stafflink.com.sg to submit your resume.
We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd
EA Licence No.: 04C4294
EA Personnel: Jason Bong Wee Kiat
EA Personnel Reg. No.: R23116067

JOB DESCRIPTION

In this position, the individual thoroughly understands digital design specs of various IP blocks and SoC architecture definition

• Develop detailed module level and SoC level testplans for all the functional features, based on the design spec.

• Develop ASIC verification environment including all the respective components such as stimulus, checkers, assertions, monitors and scoreboards.

• Develop directed and constrain-random verification functional tests and simulate using EDA tools to verify functional spec is working

• Execute verification plans, including design bring-up, DV bring-up, regression enabling for all the features.

• Collaborate with digital design team to debug functional testcases and deliver functionally correct designs

The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment

JOB REQUIREMENTS

· BSEE or MSEE, entry level

· Strong communication, analytical and documentation skills and ability to interface with other groups

· Strong VLSI functional verification experience, preferably with exposure to complex, high speed custom VLSI products

· Strong hardware functional verification language and Object-oriental language development skill. Prefer with SystemVerilog/ UVM experience

· Familiar with ASIC verification methodology, tools, and development flow

· Working experience or familiar with Ethernet L2/L3 switch/router, SOC, AMBA bus, high-speed IO (USB-2/3, PCIe gen2/3, SATA), Flash controller, or CPU peripherals

Job Responsibilities :

1.    Participate in development of new products and product improvements with disciplined focus in product engineering design of connector solution.

2.    Design and develop quality product and ensuring manufacturability with other engineering functions involved in product development.

3.    Perform product design activity which includes translating customer requirements into product drawings and product specification, design analysis and verification, tolerance analysis, DFMEA, etc.

4.    Ensure product designs are validated per customer requirements, respecting international industry standards.

5.    Take Project Leadership role, define and reconcile technical DFM with Process Design team

6.    Responsible for product engineering of responsible product line; and be part of integrated team anticipating and resolving customer dissatisfaction.

7.    Improve product designs to bring about reduction in manufacturing cost.

Job Requirement:

1.    Bachelor / Master Degree in Mechanical Engineering, Manufacturing or other relevant discipline

2.    Minimum 5 years of product design development experience with excellent grasp of Engineering and Design principles.

3.    Experience in interconnects design industry is desirable. Senior/Staff position requires excellent design leadership skills and relevant product life-cycle knowledge.

4.    Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

5.    Familiar with CAD/CAE tool: Pro-Engineer CREO/ANSYS

6.    3D CAD modeling is a must

7.    Familiar with engineering drawing standards

8.    Working knowledge of connector application, plastic technology, insert-molding, stamping processes is preferred.

Working hours:

Mon to Fri, 8:15am to 5:30pm

• $3,500 basic + bonus + AWS

• 5 days work week

• Career Growth in the Construction & Engineering Industry

• Stable Industry with Consistent Demand
  

Our Client, with a market presence in Europe, America, and Asia, is inviting qualified candidates to fill the position as Assistant Mechanical Engineer.

RESPONSIBILITIES:

• Create detailed 2D drawings and 3D models using SolidWorks based on engineering requirements and concepts.

• Prepare manufacturing drawings, including GD&T, tolerances, BOM, and material specifications.

• Work closely with stakeholders, project managers, and cross-functional teams to refine designs and ensure manufacturability and compliance with standards.

• Update and maintain drawing revisions, documentation, and CAD data management.

• Support prototyping, testing, and production by providing accurate technical drawings and resolving design issues.

• Demonstrate a hands-on attitude by supporting prototype builds, performing basic assembly checks, and troubleshooting design issues directly on parts or assemblies.
  
  

REQUIREMENTS:

• Diploma in Mechanical Engineering or related discipline

• 1 year relevant experience

• Good knowledge, ability, and competency in SolidWorks

• Good understanding of mechanical design and technical drawings

• Proficient in 2D and 3D CAD software (SolidWorks)

• Detail-oriented with strong technical and problem-solving skills

• Good team player with a positive learning attitude
  

OTHER INFORMATION:

• Location: Tampines

• Working Days/Hours: 5 days / 9am - 6.30pm

• Salary: $3,500 + bonus + AWS (salary will commensurate according to experience & qualifications)

• The Company strives to achieve employee satisfaction and provides conducive working environment, attractive incentives and remuneration to all staff.

We are hiring on behalf of a client:

What You’ll Do

• Design, develop, and support a globally distributed software environment for manufacturing and service operations.

• Work within an international Scrum team to build robust solutions using C#, .NET Core, across Windows and Linux platforms.

• Collaborate closely with production and service engineers and managers to define requirements, analyse complex issues, and deliver scalable software solutions.

• Take ownership of quality across the full development lifecycle, including independently organising and conducting on-site testing sessions.

• Provide 2nd-level support and help ensure stable system operations and monitoring in close collaboration with the IT team.

• Leverage modern AI-assisted development tools, such as Microsoft Copilot, and apply agentic AI models such as Claude Sonnet in your daily work.

What We’re Looking For

• Master’s degree in Computer Science or a related field, with 5+ years of experience in software engineering and complex system development.

• Strong proficiency in C# and .NET, with hands-on experience in object-oriented design, automated testing, deployment, and tools such as GitHub and Artifactory.

• Familiarity with network technologies (e.g. firewalls, DMZ) and image processing is a strong advantage.

• Strong interest in automation and advanced industrial technologies, including Smart Factory and IoT, with a proactive mindset toward innovation and operational excellence.

• Fluent in English, comfortable collaborating with stakeholders across Europe and Asia, and experienced working in culturally diverse teams.

• Self-driven, analytical, and reliable, with a willingness to travel occasionally and contribute actively to team success.