Total 423 Art / Design / Entertainment job vacancies

Engineering:

o The job holder will dedicate about one half of his/her time to Test development and characterization of Advanced devices for communication (either Optical or RF&mmwave)

o Within this scope, the job holder will also be in a position to promote his/her design background to bring improvements towards industrial Testability through DFT-like approach.

o Eventually the job holder will be involved in the Industrialization phase of the product they will be working on in development to discover the Industrial / Manufacturing completing their full view over Product Life cycle (from Design to Mass Production)

o In this Scope, the Job holder will be reporting to RFOC/Product Engineering/ASIA PAC Dev and Support Team.

RF Architecture and Design:

o The job holder will dedicate the other half of his / her time to RF design activities inside the RFOC organization. For this part of activity, the job holder will be under the supervision of RFOC/HWR&D/RF&mmWave competence centre.

o The responsibility will span from contributing to an advance RF communication standard developed with key industry partners, including Asian partners, to supporting two product families especially for the Asian market.

o The RF specialist will also contribute to the ST technical community in their area of expertise.

Key Responsibilities:

• Engineering responsibilities

o Contribute to Sicoya OAK (or similar) product development through Test Spec analysis, Product Test strategy optimization and then Test development, implementation and debug.

o Contribute to DFT approach analysis and propose optimization by leveraging his Design knowledge

o Acquire autonomy and test program development, debug and validation to support efficient industrial and optimized test solution

• RF design responsibilities:

o Contribute to NF60 standardization activities through architecture and design studies.

o Become a direct contributor to specific NF60 standard chapters, participate to NF60 committee regular reviews.

o Product support for ST60 product line and ST64 NBA frequency generator.

Requirements:

• Minimum education requirement PhD or post-doctorate in RF and analog design

• Minimum 5 to 10 years of experience in the silicon manufacturing industry

• Excellent knowledge of Bi-CMOS, CMOS and FD-SOI technologies

• Proven expertise in analog and digital design, RF and millimetre-Wave architecture and design

• Knowledgeable in DFT, test development and industrial testing

• Skilled in programming and simulation languages, including Python, Matlab and CAD development suites such as Cadence-Virtuoso

• $3,500 basic + bonus + AWS

• 5 days work week

• Career Growth in the Construction & Engineering Industry

• Stable Industry with Consistent Demand
  

Our Client, with a market presence in Europe, America, and Asia, is inviting qualified candidates to fill the position as Assistant Mechanical Engineer.

RESPONSIBILITIES:

• Create detailed 2D drawings and 3D models using SolidWorks based on engineering requirements and concepts.

• Prepare manufacturing drawings, including GD&T, tolerances, BOM, and material specifications.

• Work closely with stakeholders, project managers, and cross-functional teams to refine designs and ensure manufacturability and compliance with standards.

• Update and maintain drawing revisions, documentation, and CAD data management.

• Support prototyping, testing, and production by providing accurate technical drawings and resolving design issues.

• Demonstrate a hands-on attitude by supporting prototype builds, performing basic assembly checks, and troubleshooting design issues directly on parts or assemblies.
  
  

REQUIREMENTS:

• Diploma in Mechanical Engineering or related discipline

• 1 year relevant experience

• Good knowledge, ability, and competency in SolidWorks

• Good understanding of mechanical design and technical drawings

• Proficient in 2D and 3D CAD software (SolidWorks)

• Detail-oriented with strong technical and problem-solving skills

• Good team player with a positive learning attitude
  

OTHER INFORMATION:

• Location: Tampines

• Working Days/Hours: 5 days / 9am - 6.30pm

• Salary: $3,500 + bonus + AWS (salary will commensurate according to experience & qualifications)

• The Company strives to achieve employee satisfaction and provides conducive working environment, attractive incentives and remuneration to all staff.

Job Summary

Join Ardor as a founding Design Engineer in Singapore, creating seamless UX for a versatile AI-driven cloud platform that automates complex workflows and delivers impactful outcomes across diverse domains.

Full remote role, no office required.

Responsibilities

• Design and deliver user interfaces using Figma to create intuitive, user-centered designs for complex AI-driven workflows
• Develop and ship front-end components with React to implement seamless, responsive user experiences
• Apply strong design judgment and attention to detail to craft polished, high-quality product interfaces
• Navigate ambiguity and complex system requirements to iterate and refine design solutions effectively
• Collaborate within a founding team environment to drive product innovation and solve challenging UX problems

Preferred competencies and qualifications

• Experience working in early-stage startup or founding team settings
• Passion for high craftsmanship and design excellence
• Ability to adapt quickly to evolving product needs and chaotic environments

A few things Ardor done:

• Enterprise: spun up its own service to reach into the company's VPN-protected network, pulled the data, and stood up a Metabase instance wired to it — fully under Ardor's control. Dashboards, SQL, ad-hoc questions, plus code, infra, and support work — all now one prompt away. With a single integration a company gets a company-level AI agent that's trivial to roll out — just grant access the way you already do. And at the same time it's a personal agent for every employee, covering every domain, always in context of what, where, and how.
• PhD verifying computational chemistry papers — weeks of work collapsed into an hour
• Non-coder shipping a 3-tier production app on Kubernetes (React + FastAPI + Postgres)
• Aerospace engineer turning a napkin math model into working MATLAB code
• Guitarist learning a new song — Ardor built a chord trainer tailored to the track
• Founder needing market insights — just ran the research end-to-end

Same platform. Same agent.

Agentic systems have wild emergent effects — every new tool is a non-linear jump in what they can do.

Tools aren't the interface. Outcomes are.

Designing for a product that can solve such a wide range of tasks is the hardest — and most interesting — UX problem I can think of. I need someone who can make it feel effortless.

Other Information

• Location: Singapore remote
• Singapore PR/Citizen

Broadcom is seeking an experienced package design engineer for complex flip-chip-BGA packages for industry-leading ASICs with high-speed SerDes and RF/microwave communications A/D-D/A converters (ADC & DAC).  You will be part of a worldwide R&D team developing high-performance package designs for ASICs used in artificial intelligence (AI), networking, high-performance computing (HPC), and 5G base stations.  These designs include SerDes at 112G and higher, RF/Microwave ADC/DAC, DDR and more.  You'll have the opportunity to collaborate with the team to create the package structures needed to enable new design.

RESPONSIBILITIES:

• Overall design responsibility for ASIC package designs (layout/routing), including aspects of impedance matching, crosstalk, signal integrity, power integrity, manufacturability, reliability, and thermal, in partnership with our experienced team of package engineering experts.

• Package Design of critical high frequency/datarate structures for SerDes, ADC/DAC, DDR, etc.

• Schedule, prioritize, & track your work across multiple projects simultaneously

• General flip-chip BGA package design & engineering

EDUCATION/EXPERIENCE & REQUIREMENTS:

• B.Eng (EE/EEE) or similar field  and 5+ years’ experience in flip-chip-BGA package design, including high-speed SerDes

• M.Eng (EE/EEE) or similar field and 3+ years’ experience in flip-chip-BGA package design, including high-speed SerDes

• Knowledge of package-level signal integrity and power integrity, to apply to package designs

• Cadence APD (allegro package designer) experience is preferred. Equivalent tool is OK.

• Cooperate with our world-wide team (multiple time zones), including co-design with internal team members and external (Vendor) designers. 

• Good organizational and task management skills to manage multiple package design projects.

PREFERRED EDUCATION/EXPERIENCE & REQUIREMENTS:

• B.Eng (EE/EEE)  or similar field  and 8+ years’ experience in flip-chip-BGA package design, including high-speed SerDes preferred.

• M.Eng (EE/EEE) or similar field and 6+ years’ experience in flip-chip-BGA package design, including high-speed SerDes preferred.

Responsibilities:

· Design and coordinate assigned Civil and Structural projects

· Perform structural analysis and design in building or on anystructures as required by the project

· Liaise with clients & consultants to meet C&Srequirements.

· Coordinate to ensure civil and structural requirements meetproject tender, submission and construction schedule

Requirements:

· Good degree in Civil and Structural Engineering from arecognized University

· Preferably 2-3 years working experience in Civil &Structural consultancy firm

· Conversant with structural programs such as STAAD, TEKLA, ETABS,RAPT would be advantages

· Ability to work independently

· Candidate without the relevant working experience but with goodacademic results may be considered

. We regret that this position is open to Singapore Citizens only due to hiring requirements.

• Coordinate with client on design, construction and submission matters
• Prepare Geotechnical engineering designs/ analysis such as deep excavation, slope stability, tunneling, shallow and deep foundation, pipe jacking, ground improvement etc.
• Prepare Civil and Structural engineering designs such as box culvert, ECM, construction and traffic deck steel strutting
• Propose monitoring plan and monitor the performance of project
• Recognized degree in Civil / Structureal / Geotechnical Engineering.
• Fresh graduate is also welcomed to apply.
• Strong in structural and geotechnical principals and good knowledge of Design Codes.
• Conversant in numerical modelling and knowledgeable in Plaxis/Slope-W and/or ETABS, SAFE, STAAD Pro, TEDDS an advantage
• Familiar with all local authorities’ regulations and submissions
• Good Interpersonal & Communication Skills.

Interested candidates please email us your resume stating:

• Last drawn salary with breakdown if any
• Expected salary
• Notice Period / Availability

A summary of the responsibilities of this position are, and not limited to, as follows:

• Liaise with Estimating department and work together with them to develop an efficient and effective design for tender submission.
• To handle design tasks (tender scheme design and/or construction site designs) as assigned by the Design Manager.
• Liaise with project team - Follow with the project team to develop on efficient and cost effective design for construction works.
• Liase with the client / Engineer - Follow up and provide design justification together with the project team to obtain design approval.
• Any ad-hoc duties assigned by the Design Manager.

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

We are seeking a Detailed Design Engineer / Engineering Coordinator to support the engineering, design coordination, and project execution of industrial water, wastewater, and ultra-pure water treatment facilities. The successful candidate will work closely with multidisciplinary engineering teams to develop detailed design deliverables, coordinate engineering activities, and support project execution from design through commissioning.

Candidates with experience in water treatment, wastewater treatment, desalination, reuse water, industrial utilities, or ultra-pure water (UPW) systems will be highly preferred.

Key Responsibilities

Engineering & Design

• Prepare and develop detailed engineering deliverables for water and wastewater treatment projects in accordance with project specifications, client requirements, and industry standards.
• Prepare and coordinate:P&ID DrawingsFabrication DrawingsEquipment Layout DrawingsPipe Routing DrawingsEquipment Modelling Drawings
• Perform material take-offs (MTO) and support engineering quantity verification.
• Ensure engineering deliverables are completed accurately and within project schedules.

Engineering Coordination

• Coordinate with in-house and overseas engineering and design teams to ensure timely completion of engineering deliverables.
• Interface with process, mechanical, piping, electrical, instrumentation, procurement, and construction teams throughout the project lifecycle.
• Track engineering progress and assist in resolving design and technical issues.
• Support engineering document control and design review activities.

Project Support

• Participate in value engineering initiatives to improve project efficiency and reduce project costs.
• Support tendering and proposal activities by providing engineering and design input.
• Provide engineering support to Project Management, Construction, and Commissioning Teams as required.
• Assist with technical clarifications, design revisions, and as-built documentation.

Qualifications & Requirements

• Diploma, Bachelor's Degree, or equivalent qualification in Engineering or a related discipline.
• Minimum 3 years of experience in detailed engineering, design, or engineering coordination roles.
• Experience in water treatment, wastewater treatment, ultra-pure water (UPW), industrial utilities, or process plant projects is highly preferred.
• Strong understanding of engineering drawings, piping layouts, equipment layouts, and 3D modelling.
• Highly motivated, organized, and capable of working under pressure in a fast-paced project environment.
• Strong communication and coordination skills.

Software Skills

• Autodesk Construction Cloud
• AutoCAD
• AutoCAD Plant 3D
• REVIT
• Google Drive
• Google Meet
• Microsoft SharePoint
• Microsoft Teams
• Navisworks

Advantageous

• SolidWorks
• SAP

Responsibilities:

a) to assist the Superintending Officer/ Architect to monitor and coordinate Architectural works to be completed by Contractors for RI/TOP and CSC inspections

b) to act as channel for all claims and disputes and to record the facts which are relevant. To advise the Superintending Officer of any potential claim situations.

c) to measure the amount of work done for the purposes of payment and coordinate with QS for such payments.

d) to ascertain the final value of the work done under the various contracts and coordinate with the QS in regard to final account.

e) to check that all construction work is carried out in a safe manner

f) to check that all materials and workmanship as stipulated in the specifications are complied with by contractors. This includes sample tests or materials and workmanship.

g) to watch for faulty workmanship and material incorporated in the works and to issue instructions for rectifications

h) to keep a record of all measurements and tests and to bring plans into conformity with the work actually executed. To check and verify accuracy of as-built drawings

i) to work under the direction of the Superintending Officer/ Architect for site organisation, allocation of duties and tasks and coordinate with others for M&E services and structural design that affects architectural and ID works.

j) to participate in Client/Consultant's site meeting and technical meeting when requested
h) work closely with Authority's architect in reviewing and recommending approval of all architectural mock up and material same submission as well as architectural works at site to the Engineer for acceptance.

Requirement:

• Bachelor’s Degree in Architecture, Civil Engineering, Professional certifications (e.g., Registered Architect, Chartered Architect) or a related field.

• Minimum of 10 years experience in architecture and design management, experience in managing large-scale infrastructure project.
• Proficiency in architectural design software (e.g., AutoCAD, Revit, BIM Navisworks) and Microsoft Office Suite.
• Valid accreditation with IES.

We are seeking a highly skilled and experienced Senior Design Engineer to join our team, a leading firm specialising in the design and manufacture of waste management and municipal equipment. This role offers the opportunity to work on innovative projects that make a real impact on communities and the environment.

DUTIES & RESPONSIBILITIES

Design and Development

• Lead the design and development of waste management and municipal equipment, ensuring all products meet safety, quality, and performance standards.

• Utilize advanced CAD software to create detailed 2D, 3D models and technical drawings.

• Conduct feasibility studies and risk assessments for new designs and modifications.

• Construct and maintain accurate BOMs and revision control systems, building a standard parts directory, material library and producing company engineering standards.

Project Management

• Oversee projects from concept through to production, managing timelines, budgets, and resources.

• Coordinate with cross-functional teams including manufacturing, procurement, and quality assurance to ensure seamless project execution.

• Provide technical leadership and mentoring to junior engineers and design team members.

Innovation and Improvement

• Drive innovation by researching and integrating new technologies and materials to enhance product performance and sustainability.

• Identify opportunities for process improvements and cost reductions while maintaining product integrity.

Compliance and Standards

• Ensure all designs comply with relevant industry standards, regulations, and safety requirements.

• Prepare and review technical documentation and reports, including compliance certifications and testing protocols.

Client and Stakeholder Engagement:

• Liaise with clients, suppliers, and stakeholders to understand requirements and provide technical expertise and support.

• Present design concepts and project updates to clients and senior management.

REQUIREMENTS

• Degree in Mechanical Engineering, Industrial Design, Mechatronic or a related field. Professional engineering qualifications (e.g., Chartered Engineer) preferred.

• Minimum of 5 years’ experience in design engineering, with a proven track record in waste management or municipal equipment. Proficient in mechanical structural calculation.

• Proficiency in CAD software (e.g., SolidWorks, AutoCAD), and knowledge of engineering principles related to mechanical design and fabrication.

• Strong project management skills with experience in leading cross-functional teams and managing complex projects. LTA submission, compliance with safety regulations. Engineering support and correspondence to vehicular projects.

• Excellent problem-solving abilities and a keen eye for detail.

• Strong verbal and written communication skills, with the ability to present technical information clearly and effectively.

• Ability to work in a fast-paced environment and adapt to changing priorities and requirements.

Job Title: Contract Manager (Renovation construction background) (ID67118)
Location: Kaki Bukit
Working Hours: Mon to Fri, 9am-6pm, Sat, 9am-1pm(wfh)
Salary: $5500 to $8000
Benefits：AL from 14days, AWS

Job Description
• Prepare tenders, bids, project proposals, budgets, and cost estimates.
Review, draft, and negotiate contracts to ensure compliance with corporate goals.
• Lead and support QS team; liaise with clients, project managers, subcontractors, and legal/technical teams
• Manage budgets, timelines, progress claims, variations, EOT/cost claims, and final accounts.
• Monitor project progress through site meetings and ensure compliance with technical standards.
• Identify risks, resolve contractual issues, and recommend solutions.
• Conduct post-project reviews to improve cost efficiency, communication, and productivity
• Maintain contract management database and perform ad-hoc duties as required.

Candidate Profile

This role is suited for individual with an excellent eye for detail, excellent communication and organisational skills. The individual will be self motivated and will be able to work and under pressure.

Job Purpose

The Document Controller will be responsible for managing all construction and technical documents for the company. She will be implementing processes and tools, providing system reports, maintaining and updating electronic information systems, distributing documents, and ensuring accuracy of all documentation.

Key Responsibilities

•Responsible for creating and maintaining a filing system that supports efficient informationmanagement with the project team.

•Effectively follow the Company’s standard operating procedures in submissions of documents andresponsible for complying with Project Control System procedures for proper documentation.

•Conduct regular review audits to ensure information on all records is accurate and up to date.

•Provide administrative support for site set-up and maintenance.

•Coordinate with all departments to assure that all documents are kept in the right place and in theright department file archive to ensure consistency across the business.

•Ensure that all corporate documents are well checked and submitted on time prior to the document’ssubmission due date. Not all employees follow the standard format thus making it the responsibilityof a Document Controller to edit documents that have typographical errors and other types of errorsthat may lead to the disqualification of a document.

•Submission of samples, drawing, ISO document and progress weekly report to respectivestakeholders.

•Follow up with consultants for the approval of samples, including coordination with the tradeconductors.

•Responsible for submitting corporate documents punctually ensuring that ISGs quality standards aremet. Documents with poor quality may lead to further an operational problem hence it is important tosubmit each document with standard quality.

•Keep track on submission of shop drawings, once approved, copies of the updated drawings are tobe printed and sent to site.

•Ensure that all documents are submitted to their pre-designated departments before the requiredsubmission date expires in order to make submissions early.

•Filing of documents in hard and soft copies ensuring OMM are

•Keep track of all Company records by looking through both hard files and computer database files on aregular basis. Keep track of any document changes by highlighting document modifications so that thesechanges can be viewed by upper management personnel.

•Submission for fit-out deposits refunds.

•Provide general administrative support to the project teams as required

Our esteemed client, an established MNC, is searching for a Design & Coordination Engineer:

Job Responsibilities:

• Coordinate and review design drawings with consultants to ensure compliance with project and authority requirements.
• Identify and resolve technical issues during design and construction phases.
• Plan, monitor, and report on shop drawing production progress.
• Prepare technical submissions, including materials, construction methods, and C&S shop drawings.
• Liaise closely with Architectural and M&E teams as well as relevant authorities to resolve design and site-related matters.
• Supervise and guide a team of BIM Modelers for the production of coordinated shop drawings and Concrete Body Plans.

Job Requirements:

• Degree in Civil or Structural Engineering or equivalent qualification.
• Minimum 3 years of relevant experience in design coordination, preferably with a main contractor.
• Registration as a Professional Engineer (PE) with the Professional Engineers Board will be an advantage.
• Strong understanding of design standards.
• Independent, analytical, and self-motivated, with strong teamwork and communication skills.

Additional Information:

• Salary: Up to SGD 7,000 +VB (1 - 2 Months)
• Working Location: Redhill
• Working Hours: 5 Days Work, 8am - 5pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

tstar.recruit.pte.ltd+candidate+j633wy3w5@mail.manatal.com

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

Your Job

As a Senior Engineer, Die Design, your primary responsibility is to lead and participate in the design and development process from concept to delivery. You will provide the best value working design solutions for technical problems. Collaboration with Product Designers, Procurement, Buyers, Stamping, and vendors is essential to meet project launch objectives.

Our Team

You will be reporting to the Principal Engineer, Die Design. In this role, you will frequently engage with external vendors and suppliers to ensure smooth processes and achieve project goals.

What You Will Do

• Lead the design and development from concept to delivery, providing effective solutions to technical challenges.
• Collaborate with various stakeholders, including Product Designers and Procurement, to achieve project objectives.
• Formulate the scope of works and develop design philosophies based on product design.
• Provide ballpark quotes and schedules for MIE during project launches.
• Highlight product design issues during design reviews and FMEAs.
• Conduct tooling design reviews using design guidelines and FMEAs.
• Design and develop tooling to support new product launches, ramp-ups, and FA closures until mass production.
• Collaborate closely with Toolmakers on FOT and Die Qualification.
• Work with procurement for quotations and vendor selection.
• Attend design review and progress meetings, acting as the primary point of contact for vendors.
• Coordinate with external vendors for design reviews, schedules, specifications, FA closures, and other technical issues.
• Drive new technologies and methodologies to effectively reduce lead time, cost, and quality.
• Improve tooling for QN, QAP, and yield loss reductions.
• Perform other duties as assigned by Management.

Who You Are (Basic Qualifications)

• NTC 2 or Diploma in Engineering or equivalent.
• Minimum of 8 years of experience in die debugging, fabrication, and building of progressive dies.
• 8 years of experience in the tool and die industry.
• Proficient in Microsoft Office, AutoCAD.
• Proficient in Siemen NX.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Job Description :

• Responsible for the execution of civil and structural design involving the preparation of calculations and review of structural design drawings in accordance to customers' specifications, applicable codes, standards and other generally accepted practices.
• Assist in producing tender specifications and design requirements for calling of tender contracts.
• Undertake detailed design of buildings and civil infrastructures.
• Work with Qualified Person (QP) to develop design scheme for civil and structural works.
• Involve in project planning, implementation and close monitoring of projects.
• Project coordination including submission to local authorities and liaison during the construction stage.
• Liaise with clients, consultants and authorities on technical matters.

Requirements :

• Candidates must possess at least degree in Civil Engineering (preferably recognised by PE Board).
• Engineers with minimum 1 years' experience in relevant engineering design work. Conversant with latest design codes and authority requirements (Codes of practice, directives, etc.).
• With good attitude towards work and timeline.

• $3,500 basic + bonus + AWS

• 5 days work week

• Career Growth in the Construction & Engineering Industry

• Stable Industry with Consistent Demand
  

Our Client, with a market presence in Europe, America, and Asia, is inviting qualified candidates to fill the position as Assistant Mechanical Engineer.

RESPONSIBILITIES:

• Create detailed 2D drawings and 3D models using SolidWorks based on engineering requirements and concepts.

• Prepare manufacturing drawings, including GD&T, tolerances, BOM, and material specifications.

• Work closely with stakeholders, project managers, and cross-functional teams to refine designs and ensure manufacturability and compliance with standards.

• Update and maintain drawing revisions, documentation, and CAD data management.

• Support prototyping, testing, and production by providing accurate technical drawings and resolving design issues.

• Demonstrate a hands-on attitude by supporting prototype builds, performing basic assembly checks, and troubleshooting design issues directly on parts or assemblies.
  
  

REQUIREMENTS:

• Diploma in Mechanical Engineering or related discipline

• 1 year relevant experience

• Good knowledge, ability, and competency in SolidWorks

• Good understanding of mechanical design and technical drawings

• Proficient in 2D and 3D CAD software (SolidWorks)

• Detail-oriented with strong technical and problem-solving skills

• Good team player with a positive learning attitude
  

OTHER INFORMATION:

• Location: Tampines

• Working Days/Hours: 5 days / 9am - 6.30pm

• Salary: $3,500 + bonus + AWS (salary will commensurate according to experience & qualifications)

• The Company strives to achieve employee satisfaction and provides conducive working environment, attractive incentives and remuneration to all staff.

THE ROLE:

You will be responsible for testing, validating, and optimizing optical transceivers to ensure high performance and reliability in fiber optic communication systems. This role involves working closely with design teams to develop validation methodologies and improve product quality.

THE PERSON

You are a detail-oriented engineer with a strong foundation in optical communication systems and a passion for innovation. You thrive in collaborative environments and are driven to solve complex technical challenges. Your hands-on experience with optical components and high-speed link validation makes you a valuable contributor to our cutting-edge silicon design team.

KEY RESPONSIBILITIES:

• You will develop and execute validation plans for optical transceivers and related components.
• Perform calibration, characterization, and testing of electro-optic transceivers.
• Set up and maintain automated test platforms for optical transceiver validation.
• Analyze test results and troubleshoot performance issues.
• Collaborate with cross-functional teams to improve product design and reliability.
• Document validation processes and generate technical reports.
• Stay updated with industry trends and advancements in optical communication technologies.

PREFERRED EXPERIENCE:

• Hands on optical components testing and high-speed links validation experiences. 
• Technical Skills: Strong knowledge of optical communication systems and fiber optics.
• Experience with Python, C, MATLAB, and data analysis.
• Ability to debug and validate hardware/electronics.
• Soft Skills: Strong analytical and problem-solving abilities.
• Excellent communication and teamwork skills.
• Experience with Silicon Photonics and high-speed optical interconnects.
• Knowledge of optical packaging and characterization techniques.

ACADEMIC CREDENTIALS:

• Bachelor's/Master’s/Ph.D. in Electrical Engineering, Optical Communications, or related fields.

LOCATION:

Singapore

about the job

• Create electrical designs that strictly adhere to safety, quality, and project specifications. Generate, maintain, and revise electrical drawings and technical documentation.
• Carefully select appropriate electrical components and cabling, balancing physical layout constraints, sizing, and overall cost.
• Act as a technical resource for the operations team during the assembly and testing phases. Lead troubleshooting efforts for equipment-related electrical issues and ensure complete resolution.
• Adhere to standard engineering change control procedures when making or documenting electrical part replacements.

Jobs requirement

• Degree in Electrical and Electronics Engineering
• Minimum of five years of proven experience in equipment /semiconductor machine electrical design.
• Proficiency in using 2D CAD systems for electrical drafting.
• Must possess a strong understanding of industrial control systems, particularly concerning strict grounding requirements.

If you are interested in the position , kindly send your CVs to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Job Responsibilities

• Construct and update 3D BIM models using Autodesk REVIT to reflect the latest design information and ensure drawing accuracy
• Collaborate with multidisciplinary teams to coordinate design changes and resolve model challenges
• Prepare BIM models to support visualization and enable informed decision-making based on design updates
• Ensure M&E designs comply with relevant codes, regulations, and design specifications
• Produce combined M&E services drawings, builders work drawings, and detailed shop drawings aligned with design criteria
• Perform clash detection within BIM models to identify and resolve conflicts proactively
• Adhere to BIM Execution Plans and project workflows to maintain consistent processes and quality
• Follow BIM content standards and development procedures to ensure uniformity and high-quality deliverables
• Document all drawings with proper version control and traceability for project records
• Conduct modelling quality control checks to uphold accuracy and completeness of BIM outputs
• Perform additional duties as assigned to support overall project success and delivery

Job Requirements

1. Diploma or Degree in MEP or equivalent qualification
2. Minimum 2 years of relevant working experience in BIM modelling and M&E design
3. Knowledge of Singapore BIM requirements and standards
4. Proficient in Autodesk REVIT for BIM modelling and drawing production
5. Skilled in AutoCAD for drawing linkage and cleanup
6. A team player with sense of responsibility

Job Responsibilities:

• Construct and update 3D models using Autodesk REVIT to produce accurate construction drawings
• Incorporate latest design changes into 3D models to maintain up-to-date shop drawings
• Collaborate with multidisciplinary teams to resolve design challenges and coordinate model changes
• Prepare BIM models to support visualization and informed decision-making based on design updates
• Verify M&E designs comply with relevant codes, regulations, and standards
• Produce architectural layouts and detailed shop drawings aligned with design criteria and specifications
• Perform clash detection to identify and resolve conflicts within models
• Adhere to BIM Execution Plan and project workflow requirements to ensure consistent processes
• Follow BIM content standards and development procedures to maintain quality and uniformity
• Document all drawings properly to ensure traceability and version control
• Conduct modelling quality control to uphold accuracy and completeness
• Perform additional duties as assigned to support project success

Job Requirements:

1. Diploma or Degree in Architecture, Structural Engineering, or equivalent
2. Minimum 3 years of relevant working experience
3. Proficient in Autodesk REVIT for 3D modelling and drawing production
4. Skilled in AutoCAD for drawing linkage and cleanup
5. Knowledge of BIM requirements according to Singapore standards
6. Familiarity with Singapore Architectural Authority requirements

Job Responsibilities:

• In charge of construction of 3D model and prepare drawings using REVITsoftware
• Updating of 3D model in accordance with latest information to ensureaccuracy of shop drawings
• Collaborate and coordinate with other discipline’s design-changes andmodel challenges
• Prepare BIM models to communicate, aid visualization and make informeddecision based on the design changes
• Produce and check structural rebar shop drawings to ensure details arein line with the design criteria and specification
• Produce structural layout and detailed shop drawings for civil andstructural engineering works in accordance to design criteria and specifications
• Perform clash detection to identify and resolve conflicts withinmodels
• Adhere to BIM Execution Plan and projectworkflow requirements to ensure consistent processes
• Follow BIM content standards anddevelopment procedures to maintain quality and uniformity
• Document all drawings properly to ensuretraceability and version control
• Conduct modelling quality control touphold accuracy and completeness
• Perform additional duties as assigned to support project success

Job Requirements

1. Diploma or Degree in Structure, Architecture, or equivalent
2. Minimum 3 years of relevant working experience
3. Knowledge of BIM Requirements in Singapore standard is a plus
4. Proficient in the use of Autodesk REVIT is a must
5. Skilled in AutoCAD for drawing linkage and cleanup
6. A team player withsense of responsibility

Responsibilities:

• Coordination of Architectural Drawings: Coordinating and reviewing all architectural drawings, including design drawings and shop drawings. Ensure they are consistent, accurate and comply with the design intent, contract & authority compliances. Responsible for timely scheduling and issuance of design drawings and shop drawings align with project schedule and construction activities.
• Liaison with Consultants and Subcontractors: Working closely with architectural consultants/structural/M&E engineers and various subcontractors to resolve architectural and technical issues and ensure smooth integration of different disciplines.
• Statutory Approvals: Assisting in the preparation and submission of architectural drawings/ documents to relevant authorities to obtain necessary approvals such as Corenet X Gateways,Building Plan (BP), Works Permit (WP), Temporary Occupation Permit (TOP) and Certificate of Statutory Completion (CSC).
• Technical Support and Problem Solving: Providing technical support to the construction team on architectural matters, resolving design discrepancies and addressing site-related architectural issues.
• Documentation and Communication: Maintaining proper documentation of design changes, site instructions (CVIs/RFIs/SDAs) and correspondences. Attending technical meetings and Internal / External design coordination meetings to report outcomes and ensure effective communication among project stakeholders.
• Coordination of Materials and Samples: Providing technical support to construction team on the submission and approval for architectural materials, finishes and samples to ensure they meet the specified design requirements.
• Building Information Modelling (BIM) Coordination/ VR Walkthrough: Familiar with Revit/Naviswork/Enscape to coordinate architectural and consultant drawings, identify clashes and ensure consistency in construction documents.
• As-Built BIM Model/Drawings: Compiling and handing over architectural as-built BIM Model/drawings upon project completion.

Requirements:

• A Bachelor's Degree/Diploma in Architecture or a related field.
• At least 3 years or more of experience as a Design Coordinator or Architectural Coordinator working on Design & Build condominium projects for A1 main contractors.
• Proficiency in software (ACAD/Revit/Naviswork/Enscape).
• Familiar with local authorities (URA/BCA/NEA/PUB/SCDF/LTA/Nparks) requirements.
• Strong knowledge of architectural design detailing and construction processes.
• Ability builds up good relationships with consultants, work independently and as part of a team.

Responsibilities:

• Coordination of Structural Drawings: Review structural design drawings and documents submitted by the consultant for constructability, compliance with project specifications and potential clashes with other disciplines. Responsible for timely scheduling and issuance of FW/CBP drawings and sub cons structural shop drawings align with project schedule and construction activities.
• Liaison with Consultants and Subcontractors: Working closely with structural consultants/architectural/M&E engineers and various subcontractors to resolve structural/technical issues and ensure smooth integration of different disciplines.
• Statutory Approvals: Assisting in the preparation and submission of structural drawings/ documents to relevant authorities to obtain necessary approvals such as Corenet X Gateways, Building Plan (BP), Structural Plan (ST), Works Permit (WP), Temporary Occupation Permit (TOP) and Certificate of Statutory Completion (CSC). Keep track of the status of submissions and liaise with authorities to expedite the approval process.
• Technical Support and Problem Solving: Provide technical support to the site team on structural-related matters, interpreting design drawings and resolving site queries. Liaise with the structural consultant to address site issues and implement design changes or clarifications as needed.
• Documentation and Communication: Maintaining proper documentation of design changes, site instructions (CVIs/RFIs/SDAs) and correspondences. Attending technical meetings and Internal / External design coordination meetings to report outcomes and ensure effective communication among project stakeholders.
• Building Information Modelling (BIM) Coordination/ VR Walkthrough: Familiar with Revit/Naviswork/Enscape to coordinate structural and consultant drawings, identify clashes and ensure consistency in construction documents.
• As-Built BIM Model/Drawings: Compiling and handing over structural as-built BIM Model/drawings upon project completion.

Requirements:

• A Bachelor's Degree/Diploma in Civil/Structural Engineering or a related field.
• Minimum 3 years' experience as a Structural Design Engineer, Project Engineer or Structural Coordinator on Design & Build condominium projects for A1 main contractors. Candidates with C&S consultant firm experience and design background will be preferred.
• Perform structural analysis and simulations using software such as ACAD, Revit, STAAD. Pro, or similar tools.
• Familiar with local authorities (URA/BCA/NEA/PUB/SCDF/LTA/Nparks) requirements.
• Ability builds up good relationships with consultants, work independently and as part of a team.

Responsibilities

a. Technical Review – Review architectural, consultants’, and all specialists’ drawings, layouts, and specifications. Ensure all M&E designs meet contractual requirements and comply with relevant local authority standards (BCA, PUB, SCDF, etc.).

b. Design Coordination – Manage and integrate all M&E design works with architectural, structural, and other disciplines. Resolve design discrepancies with consultants and subcontractors to achieve a fully coordinated and buildable design. Ensure timely issuance of design and shop drawings in line with the project schedule and construction sequence.

c. Technical Support and Problem Solving – Provide technical support to the site team and resolve M&E design issues during construction. Ensure all installations comply with approved designs and statutory requirements.

d. Statutory Approvals – Assist in the preparation and submission of M&E drawings/documents to relevant authorities for approvals, including Corenet X Gateways, Building Plan (BP), Works Permit (WP), Temporary Occupation Permit (TOP), and Certificate of Statutory Completion (CSC).

e. Documentation and Communication – Maintain proper records of design changes, site instructions (CVIs/RFIs/RFAs), and correspondences. Attend technical and design coordination meetings (internal and external), report outcomes, and ensure effective communication among project stakeholders.

f. Material and Sample Coordination – Support the construction team in preparing and obtaining approval for M&E materials and samples to ensure compliance with design specifications.

g. BIM Coordination / VR Walkthrough – Utilize Revit, Navisworks, and Enscape to coordinate architectural, structural, and M&E models, identify clashes, and ensure consistency and accuracy in construction documents.

h. As-Built BIM Model / Drawings – Manage all specialists to ensure accurate and compliant M&E as-built BIM models/drawings and O&M manuals upon project completion.

i. Design Change & Value Engineering – Manage design changes and propose cost-effective or practical design improvements to enhance project efficiency.

Requirements

a. Bachelor’s Degree or Diploma in Mechanical, Electrical, or a related engineering field.

b. Minimum 3 years of experience as an M&E Design Coordinator or M&E Coordinator on Design & Build condominium projects with A1 main contractors.

c. Strong understanding of M&E systems (ACMV, Electrical, ELV, Plumbing & Sanitary, Gas, Fire Protection, PWCS, Lift/Pool, etc.).

d. Familiarity with Singapore authority codes and submission procedures (URA, BCA, NEA, PUB, SCDF, LTA, TFCC, EMA, etc.).

e. Proficient in AutoCAD, Revit, Navisworks, and other BIM coordination tools.

f. Strong analytical, problem-solving, and communication skills.

g. Able to build good working relationships with consultants, work independently, and collaborate effectively as part of a team.

h. Capable of coordinating efficiently with multi-disciplinary teams and working under project deadlines.

i. Candidates with more experience may be considered for the Senior M&E Design Coordinator role.