Total 12,767 job vacancies in Singapore

ACMV Engineer (Air Conditioning and Mechanical Ventilation Engineer)

Working Days: Monday – Friday
Working Hours: 9am – 5.30pm
Salary: $ 3,800 - $ 5,000
Working Location: 70 Eunos Ave 7, Singapore 409569

Industry: Interior Design & Construction Company

Job Responsibilities:

• Design and planning of ACMV and MV systems
• Preparing and submitting tenders (Tender Costing)
• Conducting site surveys and managing the construction site (Site Management)
• Familiar with and arranging ACMV related services
• Assisting in the procurement of engineering equipment and materials (Procurement)
• Supervising on-site installation work to ensure compliance with drawings and specifications
• Assisting in testing and commissioning (T & C) Commissioning) Assisting with system troubleshooting and problem solving
   

Requirements:

• Diploma in Engineering-related experience (Mechanical, Electrical or construction services preferred)
• 2+ years of relevant work experience
• Familiarity with local regulations and standards preferred 

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

Responsibilities

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Requirements

• Degree in Electrical/Mechanical Engineering
• No experience needed, training provided

Interested candidates, please forward your resume to jalenetan@recruitexpress.com.sg

Consultant: Jalene Tan (R26160390)
Recruit Express Pte Ltd (99C4599)

About the Role
We are looking for a hands-on Equipment Associate Engineer /Technician  to support the setup, testing, and troubleshooting of advanced semiconductor equipment and systems.

This role is ideal for a technically strong individual who enjoys working with precision instruments, solving complex problems, and collaborating with engineering teams in a cleanroom environment.

Responsibilities

• Set up, calibrate, test, and troubleshoot electronic circuits, components, instruments, and mechanical assemblies.
• Develop and execute test specifications, methods, and procedures based on technical drawings, schematics, and blueprints.
• Perform functional testing and troubleshooting on sub-assemblies and complete systems.
• Carry out rework and adjustments on assemblies or systems based on test results.
• Prepare clear technical reports documenting test results, root causes, and recommended solutions.
• Assist with the selection, configuration, and operation of specialized test equipment.
• Support engineering teams in experiment setup, data collection, and analysis.

Requirement

• Diploma or Bachelor’s Degree in Engineering or a related technical discipline.
• Strong ability to read and interpret technical drawings, schematics, and procedures.
• Hands-on experience working with semiconductor equipment.
• Proficiency using precision measurement and test instruments.
• Excellent troubleshooting, analytical, and problem-solving skills.
• Strong communication skills with the ability to work effectively in a team environment.
• Comfortable working in a cleanroom environment and on shift schedules.

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Please email your resume in a detailed MS Word format to gesse.tan@peopleprofilers.com stating

1. Current Drawn
2. Expecting Salary
3. Date Available
4. Reason to Leave each job:

People Profilers Pte Ltd

• 20 Cecil Street, #08-09, Plus Building, Singapore 049705
• Tel: 69509745
• EA Licence Number: 02C4944
• EA Registration Number: R1108448
• EA Personnel: Tan Lili Gesse

The Software Test Engineer is responsible for validating, testing, and ensuring the quality of software used in complex automated equipment systems. The role focuses on test planning, execution, automation, debugging support, and collaboration with software development teams to ensure reliable and high-performance system behavior.

Key Responsibilities

• Perform timing analysis of software sequences to optimize system reaction time and performance
• Develop test plans and test procedures based on technical specifications
• Design test concepts and document measurement results, test outcomes, and analysis reports
• Collaborate with software engineers to investigate issues and resolve technical problems
• Create detailed bug reports and track issues through to closure
• Analyze technical requirements and system problems, proposing corrective actions and solutions
• Provide technical support for field operations and customer site activities when required
• Participate in software feature design reviews and support major software release validation
• Design and implement automated test scripts using scripting and automation tools
• Maintain and improve automated test frameworks and test environments

Requirements

Education

• Diploma or Bachelor’s degree in Automation Engineering, Mechatronics, Software Engineering, or related discipline
• Good knowledge of controlling and programming mechanical or automated systems
• Proven experience in software testing, troubleshooting, and validation (mandatory)
• Experience in writing technical documentation, test reports, and defect reports
• Familiarity with automation or equipment control systems
• Knowledge of semiconductor equipment or manufacturing environment.
• Experience with test automation using scripting (e.g., Python, C#, or similar tools)
• Exposure to project management.

EA License : 02C3423

EA Personnel : R22108699

Civil Engineer

• Location: within central area [1 – 2 sites]
• Salary: $2500 - $4000
• Working hours: 5.5 days mon - fri 8.30am - 6pm | Sat 830am - 12pm

Roles & Responsibilities

• Responsible for overall project management and coordination to new and existing projects with the proper monitoring of manpower allocation, project requirement and attendance of meeting, etc.
• Prepare, discuss and report project schedule, cash flow, budget, etc. with the management.
• Track and report weekly on project(s) completion.
• Track and forecast on monthly project revenue and expenses, etc and other key project metrics.
• Outline and determine project roles of team members based on respective project requirement, timeframe and budget.
• Outline and determine resource requirement (including staffing, software, hardware, equipment and facilities) of respective projects, based on project specification and requirement.
• Continually seeks opportunities to increase customer satisfaction and strengthen client relationships.
• Communicates effectively with clients to identify needs and evaluate alternative business solutions.
• Leads the respective project team to prioritize signed off project works based on analysis of strategic importance, tasks outstanding, obstacles or barriers, budget resources and deadlines.
• Establish and well documented and communicated schedule for all phases of project(s).

Requirements:

• Degree in Civil & Structural Engineering or its equivalent
• At least 3 years of relevant experience

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

RF Maintenance Engineer (4G/LTE) (Telco/ East/ Permanent Role)

• Location: East Area
• 5 Days work week
• Permanent Role
• Salary: up to $4,000 + Variable Bonus

Responsibility:

• Lead end-to-end 4G site rollout, including site surveys, design, testing, commissioning, and optimization.
• Plan, manage, and monitor engineering activities to ensure timely project completion.
• Conduct preventive and corrective maintenance for base stations and antenna systems.
• Address customer issues through troubleshooting and effective solution proposals.
• Coordinate dismantling and reinstatement works with HDB, property owners, contractors, and local authorities.
• Provide after-hours standby support during major events, both on-site and remotely.
• Act as the technical lead for projects, ensuring adherence to delivery timelines, standards, milestones, and documentation.
• Manage in-building system design, documentation (technical and commercial), scheduling, and equipment procurement.
• Review, negotiate, and track contractor and supplier quotations and delivery timelines.
• Support design and costing for TETRA, LTE, and other company services.
• Monitor and optimize 4G network performance, including participation in technical trials.
• Prepare technical reports and presentations, and manage spare parts and inventory.
• Demonstrate strong teamwork, ownership, interpersonal skills, and flexibility to work extended hours when needed.

Requirement:

• Min Diploma / Degree in Telecommunications, Electronics or related.
• Minimum 2 years of LTE mobile network maintenance experience.
• Basic experience in project management is preferred.
• Solid understanding of 4G radio access technologies, RF principles, and antenna systems.
• Proficient in Microsoft Office applications (Excel, PowerPoint, Word, etc.).
• Comfortable working in diverse environments such as rooftops, tunnels, offshore sites, construction areas, and other physically demanding conditions.
• A valid Class 3 driving license is required.

How to apply

Interested candidates who wish to apply for the post, you may click the Apply Now Button or send in your updated resume (in MS Word format) to jackyooi@careerally.com.sg

We regret to inform that only shortlisted candidates will be notified.

Careerally Pte Ltd | EA Licence: 24C2215

Ooi Chuan Yi (Jacky)| EA Registration No: R24122948

YOUR NEW JOB

As a Network Service Engineer, you'll support a large-scale government network environment, ensuring the availability, performance, security, and compliance of critical infrastructure. You'll be involved in network operations, incident resolution, security management, patching, and infrastructure lifecycle activities.
This is a 12-month contract role (renewable), supporting a new long-term government project . Work will be onsite, Mon – Fri office hours.

WHAT YOU’LL BE DOING

• Monitor and maintain network infrastructure to ensure high availability and performance
• Troubleshoot and resolve network incidents, outages, and performance issues
• Perform root cause analysis and support SLA-driven incident management
• Manage routers, switches, firewalls, and load balancers across the environment
• Support firewall policy reviews, security monitoring, and compliance activities
• Execute patching, vulnerability remediation, and lifecycle upgrades
• Support change management, release activities, and rollback planning
• Maintain network documentation, SOPs, CMDB records, and operational reports
• Perform capacity monitoring, trend analysis, and infrastructure health checks
• Participate in standby support and after-hours maintenance when required

WHAT IS NEEDED FROM YOU

• 2–6 years of experience in network engineering, network operations, or infrastructure support
• Hands-on experience with Cisco networking technologies
• Experience supporting enterprise routers, switches, and firewalls
• Familiarity with ITIL processes, incident management, and change management
• Experience with network monitoring, troubleshooting, and operational support
• Eligibility for government security clearance
• Open to occasional overtime

WHAT WILL MAKE YOU STAND OUT

• Experience with Palo Alto, Check Point, or F5 technologies
• Exposure to government, public sector, or highly regulated environments
• Network certifications such as CCNA, CCNP, PCNSE, or equivalent
• Experience supporting large-scale managed services environments
• Familiarity with vulnerability management and security compliance frameworks

Job Title: Field Engineer for S3/S5 work packages (LV secondary)

Role Overview

We are looking for an experienced Electrical Field Engineer to support an HVDC / Grid Solutions project.

The engineer will be site-based and act as the key technical interface between construction, commissioning, engineering teams, contractors, and clients.

The role focuses on supporting installation, troubleshooting, and commissioning activities related to LV Secondary Systems (S3/S5 work packages), ensuring technical issues are resolved effectively and properly documented.

Key Focus

• Focus on all issues related to secondary LV activities and associated interfaces (mainly but not limited to S3, S5 work packages)

• Ensuring daily monitoring in direct contact with the site teams and the partner(s) responsible for this activity

• This role is essential during Cable connection campaign

• Will provide close support and follow up to the engineering department by proposing documented solutions

• Update or prepare, as appropriate, SMFs under the supervision of the assigned engineering office

• Support the Lead field Engineer and S2 field Engineer during the cable-pulling campaign

Other actions

• Support to the Site Manager during technical meetings involving the client, partners, and subcontractors.

• Collaboration with the Quality and Document Control teams

• Ensures strict adherence to the change management process and the proper maintenance of "As-Built" (marked-up) documentation.

• Participates in technical and coordination meetings related to his engineering activity(ies), as well as those concerning general site operations and mandatory training sessions.

• Ensures that the GFC/SQ/SMF/Red Lines processes are used correctly

• Participates when required to GFC/SQ/SMF/RMU meetings with Site/engineering teams

• Supports all EHS (Environment, Health, and Safety) initiatives and ensures that all solutions to be implemented comply with applicable safety regulations

Requirements

• Degree in Electrical Engineering or related discipline.

• Experience in HVDC, substations, power transmission, or large-scale electrical projects.

• Similar experience on OCP or OCS station or large AC projects,

• Experience in site-based engineering, commissioning, or construction support preferred.

• Knowledge of LV secondary systems, protection & control, cabling, and electrical installation preferred.

• Strong understanding of electrical drawings, schematics, cable systems, and equipment interfaces. • Strong troubleshooting, communication, and coordination skills.

• Understanding of technical documentation related to the activity (SLD, Layouts and Erection drawing, Principles, Mechanical specifications, Equipment data sheets, BoM, OMM etc)

• Understanding of contractual obligations, limit of scope and evaluating contractual/cost impact of the possible solutions

• Analyzing planning for his scope and estimating the impact of issues.

• Familiar with Office suite (Excel, word)

Project Details

• Start Date: ASAP

• Working Hours: 6 days/week, 54 hours/week

• Overtime: Paid when working beyond 54 hours/week

• Site Allocation: Admiralty, Singapore with occasional travel to Batam site for work

• Contract length: 1 year (Extendable)

Position Overview:

• Develop image/video processing algorithms for camera related applications.

Responsibilities:

• Expand existing solutions to new levels of functionality, quality, and performance.
• Assist other teams with algorithm implementation, testing and verification
• Drive the productization of the hardware.
• Algorithm documentation
• Collaboration with external researchers.

Requirements:

Key Qualifications:

• BS/MS/PhD in Electrical Engineering, Computer Science or equivalent.
• Knowledge of image processing algorithm development;
• Good understanding of digital photography, image quality assessment.
• Proficiency in C/C++
• Demonstrate great teamwork, outstanding communication skills, and willingness to learn.

Advantageous:

• Familiar with image and color processing techniques, including HDR, AWB, color correction, noise reduction, IR removal/suppression and CFA demosaicing, etc.
• Proficiency in developing, implementing and deploying image processing algorithms for ISPs, or CMOS image sensors
• Strong mathematics background and track record of independent algorithm research.

The Ministry of Education (MOE) is modernizing its flagship learning platform, the

Student Learning Space (SLS). As a Software Engineer, you will be at the heart of this

transformation. You will build the next-generation SLS — a scalable, high-impact

platform designed to connect industry partners, teachers, and students within a vibrant

education technology ecosystem.

Your responsibilities include:

● Feature Development: Design, develop, and maintain robust, scalable, and

high-quality software modules for SLS.

● Technical Implementation: Write clean, testable, and efficient code while

adhering to established engineering standards and best practices.

● Collaborative Design: Work closely with Product Managers, UX Designers, and

Education Officers to translate pedagogical and curriculum requirements into

seamless digital experiences.

● System Architecture: Contribute to architectural discussions and help make

technical decisions that ensure the platform remains performant and

maintainable.

● Code Quality: Participate in and conduct code reviews to ensure system

coherence and mentor junior engineers in the team.

● DevOps & Reliability: Support the CI/CD pipeline and help manage cloud-native

deployments to ensure high availability and security of services.

● Agile Participation: Engage in agile ceremonies, contributing to sprint planning,

estimations, and retrospectives to drive continuous improvement.

What we are looking for:

● Bachelor’s or Master’s degree in Computer Science, Software Engineering, or a

related field.

● 3–5 years of professional software engineering experience, preferably in a

full-stack role

● Solid foundation in modern programming languages (e.g., Python, Node.js, Go)

and frontend frameworks (e.g., React, Vue).

○ Experience with cloud-native architectures (AWS/Azure/GCP) and

microservices.

○ Familiarity with containerization (Docker, Kubernetes) and CI/CD tools.

● Strong analytical mindset with the ability to troubleshoot complex system issues

and optimize performance.

● Excellent communication skills and a desire to work in a collaborative,

cross-functional environment.

● A passion for learning new technologies and a commitment to fostering a culture

of technical excellence and inclusion

Job Description

We are looking for multiple seasoned Senior and Staff System Engineers to grow an Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

Deliveries:

• Neural Network Processor (NPU) architecture, programming Model, simulation, verification, profiling and optimization
• Specification, review and verification of other IP blocks
• FPGA images and IO boards for pre-silicon verification and design exploration
• Boot ROM, bare metal BSPs, sample applications

Responsibilities:

• Support Inference Engine, Toolchain and ASIC teams on NPU
• Constantly improve productivity through automation in all areas

Skills:

• Strong ANSI C bare-metal design, implementation, optimization and debugging using GCC-like toolchains
• Strong processor architecture knowledge: ARM/RISC-V ISA, symmetric multiprocessing, cache architecture, SIMD, Vector Processing, custom instructions
• Strong software, hardware and FPGA debugging capability
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc
• Familiarity with
• Python for prototyping, demo, verification and/or automation
• OS: GNU/Linux, proprietary RTOS, Bare metal

The following will be advantageous:

• Detailed and comprehensive understanding of TinyML (e.g. TensorFlow Lite for MCUs), from training, quantization through to operator execution, optimizing for power, performance, and size.

Requirements:

1. Ph.D/MSEE/BSEE in Electrical Engineering, Computer Science or Computer Engineering
2. At least 5 years of commercial embedded system architecture and development experience.
3. Experienced in fixed point computing implementation strategies, such as quantization, scaling, saturation and overflow handling.
4. Design, implement, and maintain high-quality C/C++ functional & bit-Accurate Model for NPU operation simulation

Description:

• Lead applied research and strategic definition of machine learning algorithms, quantization methodologies, and toolchain capabilities for the Neural Network Development Kit (NDK) roadmap targeting next-generation Edge AI compute solutions
• Drive innovation at the intersection of ML algorithms and constrained hardware environments, identifying and validating the latest Edge AI technologies applicable to product requirements
• Serve as the primary technical interface between the AI Architecture team and the Software (Edge AI) team, delivering well-researched toolchain feature proposals and algorithmic specifications for implementation
• Collaborate with Software (Edge AI) and AI Architecture teams to identify and pursue targeted improvements in ML software methodology, and support Software-initiated improvement efforts with algorithmic insight and implementation guidance
• Maintain deep engagement with the global Edge AI research community to ensure the NDK roadmap reflects the state of the art in model efficiency, compression, and on-device learning

Key Responsibilities:

• Collaborate with the Sr. Design Manager (AI Architect) to define and maintain the NDK toolchain feature roadmap, ensuring alignment with the NPU hardware roadmap and overall AI product strategy
• Research, evaluate, and recommend quantization algorithms, pruning strategies, knowledge distillation techniques, and other model compression methodologies suited to constrained hardware targets
• Assemble and lead focused task forces drawing on partial bandwidth from the Software (Edge AI) and IC Design teams to prototype, benchmark, and validate proposed toolchain concepts before broader commitment
• Prototype and benchmark candidate ML algorithms and toolchain features to quantitatively demonstrate accuracy-performance trade-offs and justify roadmap prioritization

• Translate hardware architectural capabilities and constraints (as defined by the NPU Architect) into concrete toolchain feature requirements and algorithmic optimization opportunities
• Deliver comprehensive technical specifications and algorithmic documentation to the Software (Edge AI) team to enable confident and accurate implementation of NDK features
• Collaborate closely with the Software (Edge AI) team throughout the implementation phase to resolve algorithmic questions, validate correctness of implementations, and ensure performance targets are met
• Actively monitor and synthesize developments from the Edge AI research community — including publications, open-source frameworks, and industry benchmarks — to continuously inform and refresh the NDK roadmap
• Partner with the Software (Edge AI) team to jointly identify ML toolchain methodology improvement opportunities and drive those that originate from the AI Architecture team; provide expert advisory support for methodology improvements initiated by the Software team
• Evaluate and apply a range of productivity tools and techniques — including but not limited to AI-assisted methods — to accelerate algorithmic prototyping, benchmarking, and specification productivity
• Evaluate and integrate relevant open-source ML frameworks, runtimes, and toolchain components (e.g., MLIR, TVM, ONNX Runtime) as acceleration vectors for NDK development

Requirements:

• Bachelor's or Master's degree in Computer Science, Electrical Engineering, Computer Engineering, or related technical field; PhD preferred, particularly in machine learning, optimization, or computer architecture
• 8+ years of experience in applied machine learning engineering or Edge AI software, with at least 5 years focused on model optimization, ML compilers, or on-device inference toolchain development
• Proven expertise in quantization (PTQ, QAT), pruning, knowledge distillation, and other model compression techniques with demonstrated results on resource-constrained hardware
• Strong knowledge of AI/ML algorithms, neural network architectures (CNNs, RNNs, Transformers, etc.), and the trade-offs between model accuracy, computational complexity, and memory footprint
• Demonstrated ability to stay at the forefront of the Edge AI research community, with a track record of translating academic and industry advances into practical product roadmap contributions
• Hands-on experience with mainstream ML frameworks (PyTorch, TensorFlow/Lite) and familiarity with ML compiler stacks such as MLIR, TVM, or ONNX Runtime
• Experience consuming hardware architectural specifications and translating them into software toolchain requirements and algorithmic optimizations
• Excellent communication skills with ability to present complex research findings and toolchain proposals clearly to architecture, software, and executive audiences
• Strong analytical and problem-solving abilities with emphasis on quantitative benchmarking, accuracy-efficiency trade-off analysis, and performance profiling on target hardware
• Demonstratedability to work collaboratively across team boundaries, including assembling and coordinating cross-functional task forces without direct authority
• Familiarity with RISC-V ISA and its software ecosystem, particularly in the context of AI inference deployment
• Experience with FPGA-based or simulator-based prototyping to validate algorithmic concepts against pre-silicon hardware models (preferred but not required)
• Self-motivated with ability to work independently, lead applied research initiatives, and drive toolchain innovation from algorithmic exploration through specification and successful team handoff

Highlights

• No experience required as training provided 

• Gross salary up to $3,200, including shift premium and allowances

• AWS + Variable Bonus (15% of Annual Salary) 

• Company transport from Boon Lay, Choa Chu Kang, Joo Koon, Pioneer, Woodlands, and Jurong East

• 2-2-3 shift pattern, average 14–15 working days per month
  

Job Responsibilities

• Operate production equipment and support daily manufacturing activities

• Perform quality checks and report any abnormalities

• Complete production documentation and system transactions accurately

• Follow GMP, GDP, SOP, safety, and quality requirements

• Maintain good housekeeping and support continuous improvement activities
  

Requirements

• NITEC / Higher NITEC or equivalent

• Candidates with or without experience are welcome

• Able to work 12-hour rotating day/night shifts on a 2-2-3 schedule

• Comfortable working in a cleanroom environment

• Responsible, disciplined, and willing to learn

Job Description

• Industry/ Organization Type: Industrial Equipment Manufacturer
• Position Title: Customer Consultant / Service Sales Engineer
• Working Location: Boon Lay
• Working Hours: 5 days (Mon – Fri, 8.30am – 5.30pm)
• Salary Package: Basic salary up to $4,800 + Transport Allowance + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Act as the customer’s main contact person and handle customer-related matters
• Manage a group of accounts, identify key customers, and create action plans to grow these accounts
• Identify solutions needed to meet customer needs and work closely with the Technical Support Team to make them available
• Identify opportunities with existing and new customers, and update them on service value-added offerings
• Identify sales opportunities, prepare proposals, and coordinate related processes to maintain high customer satisfaction and strong customer relationships
• Support customer growth and loyalty through ongoing assistance and follow-up
• Handle customer complaints by working with internal teams to investigate issues, assess possible solutions, and recommend options to customers
• Arrange regular service reviews with customers and the Operations team for urgent jobs and key issues
• Understand customer and industry needs, and support pricing and sales strategies
• Prepare and review contract terms and conditions
• Present proposals to customers
• Share market feedback, including competitor updates, customer expectations, and industry trends
• Perform other related duties as assigned

APPLY NOW!!!

• Bachelor’s degree in Engineering with at least 2 years of relevant sales experience
• Knowledge of HVAC systems, chiller plants, airside systems, energy services, and building services is an advantage
• Able to read and understand engineering documents and respond professionally to customer questions or complaints; able to understand written instructions, emails, and reports
• Able to identify problems, gather data, and make sound conclusions
• Customer-focused, with a drive to propose suitable options to meet customer needs
• Willing to learn new solutions and improve skills to better support customers

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #82096 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

All the responsibilities we will trust you with:

• Installation, maintenance and servicing of a wide variety of equipment including but not limited to:

1. General security systems
2. Alarm systems
3. CCTV systems
4. Access control systems

• Troubleshoot problems encountered on site.
• Diagnose and resolve issues related to network connectivity, server performance, and communication between security systems (e.g., CCTV, alarm systems, access control systems).
• Provide feedback to management on issues faced on the ground.
• Perform routine maintenance and firmware updates on servers, network devices, and security system software to ensure systems remain reliable and up to date.

Your areas of knowledge and expertise that matter most for this role:

• Candidate must possess at least a Professional Certificate/ NiTEC in Engineering (Electrical/Electronic) or equivalent.
• 2 years of working experience in the related field is preferred for this position.
• Candidate must possess a Class 3/Class 3A driving license.

Job Description:

·       Responsible for handling customer quality issues and continuous improvement activities of the Company products and processes.

·       Liaise with process department on quality related issues to follow-up on effective corrective/preventive actions.

·       Required to carry out activities such as process optimization, benchmarking, etc through various statistical tools and software.

·       Handle external body audit in accordance to TS & ISO requirement

Requirements:

·       Degree in Chemical/Mechanical Engineering, Chemistry, Materials Science or equivalent.

·       Relevant experience from the semiconductor industry in servicing customer in quality related issues is a plus.

·       Knowledge of statistical software such as DOE & JMP and QC tools (FMEA, SPC and 8D format report writing) will be an added advantage.

·       Statistically inclined with good analytical & problem solving skills;

·       Self-motivated, resourceful, action-focused and result-oriented team player.

·       Familiar with IATF16949 requirement is a plus.

·       Willing to travel overseas

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or submit your resume to ref71@trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lee Jia Xiang

EA Personnel Reg No: R25158171

Join a Semi-Conductor Company as a Test Operator supporting performance testing and troubleshooting of server systems and rack-mounted products.

Responsibilities

• Set up, test, and troubleshoot server systems and rack-mounted products to ensure operational functionality
• Execute and document testing procedures and results accurately according to work instructions
• Support packing, labeling, and shipping activities to facilitate smooth production flow
• Assist in BIOS, burn-in, pressure testing, and other technical testing activities as needed
• Follow established testing processes, safety standards, and operational procedures to maintain product quality
• Maintain cleanliness and organization of the work area by applying good housekeeping and 5S standards
• Work effectively in shift schedules as required by operational needs

Required competencies and certifications

• Physically fit and healthy to perform job duties safely
• At least 1-2 years of experience in manufacturing, testing, or production environments
• Basic computer and technical knowledge to operate testing equipment and record results

Preferred competencies and qualifications

• Technical school, vocational school, or high school diploma and above
• Technical background or prior experience in server testing

Other Information

• Site Location: East of Singapore
• Includes shift work

OCTG Test & Development Engineer

Key Responsibilities:

• Working in development & testing projects under general supervision
• Peform analysis, modification and design of products and services for assigned projects which requires working knowledge of materials, components and their applications.
• Responsible for independent design, modification & analysis of connection technology related products
• Develops test procedures, conduct tests and completes test result analysis for assigned projects.
• Assists in planning and conducting tests on materials, components, subassemblies, and tools. Acquires working knowledge of test procedures and techniques with new Standards.
• Create / Modify / update the design as needed and process the engineering change request within defined time limits.
• Produce Manufacturing drawing which includes complex machining and assembly of test fixtures and perform drawing checks and sign off on work.
• Oversee Product testing, hold design and test reviews and write reports.
• Coordinate and with global teams on development & testing related activities.

Skills and Experience:

• At least 2 Years of product development and testing experience in Oil & Gas industry
• Understanding of thread and its calculations
• Experience in Finite Element Analysis (FEA)
• Experience in Solidworks tools

Qualifications:

Possess a Bachelor’s Degree in Mechanical Engineering or equivalent.

JOB DESCRIPTION

· Design and program automated test scenarios according to test plan with its acceptance criteria

· Manage and maintain end to end automated test framework such as prepare test environment, test data, update functional testing scripts in accordance with changing requirements

· Work with QC project leader to identify, propose, prioritize and implement test automations.

· Work with test engineers to troubleshoot observed issue, determine root cause and identify solutions

· Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency

· Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

•Bachelor’s/ master’s degree in computer science, Software Engineering or other equivalent degrees/experience.

•Strong python scripting skill and C++ programming background.

•Good written and verbal communication skills in Mandarin would be advantage to assist and communicate with Mandarin speaking associates/clients.

•Able to work well both independently as well as in a team.

Job Description:

• Implement sales strategies to expand the customer and distributor network within the designated territory
• Engage with consultants, contractors, and visit project sites to showcase products and create business opportunities
• Organize and deliver product training sessions and technical presentations on a regular basis
• Offer technical assistance to clients and partners both before and after the sale
• Track market developments, gather customer insights, and observe competitor actions
• Compile and present sales updates, projections, and activity reports as needed

Requirements:

• Diploma in Electrical Engineering or related field
• Minimum 2 years of sales experience in Electrical Installation Industry
• Excellent communication, negotiation and presentation skills

Interested applicants for the above advertised position(s), please kindly email an updated copy of your resume to: gs1@talenttradersg.com;

EA License No.: 13C6305

Registration No.: R23117856 CHOE KIN MUN

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Cyber Security Operations Engineer

What You’ll Do:

Person to perform/maintain the following:

• Network security management (e.g. intrusion prevention system, virtual private network)
• Web security management (e.g. URL filtering, web application firewall)
• End point security management (e.g. anti-malware, device control, application control, data loss prevention or network access control)
• Messaging security management (e.g. anti-malware, anti-spam, content filtering)
• Security & vulnerability management (security information and event management, security device systems management, device and application vulnerability management)
• Automation of management tasks

What You’ll Need:

• Degree in Computer-related disciplines
• At least 5 years of experience that covers management of enterprise security solution
• Experience in implementation and integration of Cyber Security Platform
• Possess knowledge across various information security technologies/areas in a large enterprise including firewalls, intrusion detection, encryption, Linux O/S, Windows O/S, databases, antivirus, patch management, vulnerability scanning, backup, logging and monitoring, remote access, application development, network security, application security, and change management
• Information Security or IT Controls Certification such as Certified Information Systems Security Professional (CISSP), Certified Information Systems Auditor (CISA), Certified Information Security Manager (CISM) would be an added advantage

If the above role is a good fit for you, or if you know anyone whomight be good for the role, please get in touch with an updated CV and I'll bein touch!

EA Reg Number: R1660446

EA License Number: 07C3924 

Company Registration No: 200609504D

Responsibilities

• Design and implement digital trunked radio systems for MRT/LRT communications, ensuring alignment with project specifications and client expectations.
• Interpret project requirements and translate them into high-performance radio system designs tailored for rail environments.
• Develop and review IT network architectures at radio network system level and BIM-based system drawings to design efficient RF cable routing and comprehensive coverage planning.
• Perform RF engineering analyses, including intermodulation and interference studies, EMC/EMI assessments, cell planning, and RF link budgeting to ensure reliable system performance across both dense urban and rural environment.
• Lead system integration activities, coordinating with other sub-systems, site testing, commissioning, conduct troubleshooting and providing post-deployment warranty support.
• Analyze and interpret complex technical documentation, including schematics, engineering drawings, and design specifications.
• Ensure compliance with all technical and operational project requirements, while securing necessary client approvals.
• Participate in project meetings, handling administrative responsibilities and supporting overall project execution.
• Manage stakeholder engagement, maintaining clear communication with internal teams, clients, suppliers, and overseeing project resources and managing subcontractor activities.
• Implement cybersecurity measures to safeguard radio communication systems against potential threats and vulnerabilities.
• Prepare and deliver technical documentation, design drawings, and presentations using tools such as PowerPoint.
• Troubleshoot and improve system performance by analyzing operational logs, applying system patches, and conducting validation tests

Requirements

• Diploma or Degree in Electronics, Electrical, Telecommunication Engineering, or a related field.
• Good understanding of cybersecurity principles, especially in communication systems.
• Strong multitasking and time management skills, with the ability to perform under pressure and meet tight deadlines.
• Willingness to travel for overseas assignments and adaptable to working hours aligned with railway engineering schedules.
• Proactive and independent, with excellent teamwork and communication skills.
• Proficient in Microsoft Office applications.
• Exposure to radio communication systems from major suppliers is advantageous.
• Familiarity with: Integration protocols for peripheral systems
• Radio network configuration and performance parameters
• RF propagation modeling techniques
• IP addressing schemes and network routing
• IT network infrastructure, including firewalls and LAN switches
• Air interface protocols specific to railway communication environments

Description:

• You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

• Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog
• Experience in ARM or RISC-V processor system
• Experience in embedded C and assembly code programming
• Experience in analysis of power, timing and area
• Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)
• Disciplined, quality-minded, and highly driven for excellence
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience
• Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus
• Experience in system modelling and simulation using emulator and SystemC is a plus
• Experience in UVM verification methodology is a plus
• Passionate and strong in general programming is a plus

Position Overview:

• As a design verification engineer, you will be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

• Experience in UVM verification methodology
• Disciplined, quality-minded, and highly driven for excellence,
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience, but are open to fresh graduates with outstanding results
• Candidates with relevant experiences would be offered as Staff or Sr. Staff, taking on higher responsibilities
• Experience in video processing and video analytics is a plus
• Passionate and strong in general programming is a plus

Position Overview:

As a Sr. Staff signal integrity engineer, you will be working on challenging SI and PI tasks in globally distributed teams. You will be supporting SI/PI signoff of chip design, package design and PCB design in order to support successful delivery of products of various product lines to market. You will be working with design, test, P&R and application teams globally for modeling of chip high speed I/O and power rails. You will be supporting customers in signing off hardware design or resolving SI/PI issues where system design has constraints. You will also be involved in defining specifications of product electrical performance. You may also be involved in modeling and simulation of EMC issues.

Responsibilities:

Primary (70%):

• Responsible for SI/PI signoff of chip design, package design and PCB design.
• Responsible for modeling high speed I/O and PDN.
• Responsible for customer support for PCB design signoff and issue debug.

Secondary (30%):

• Responsible for product electrical specifications related to high speed I/O.
• Responsible for modeling and simulation of EMC issues.

Requirements:

• 10+ years of working experience in SI/PI
• Deep understanding of electromagnetic theory, transmission line theory and microwave theory
• Familiar with SI/PI design flow, time domain and frequency domain modeling and simulation
• Good comprehension of PLL, equalization, CDR, jitter, noise, IBIS modeling, 8b10b encoding
• Hands on experience with lab equipment such as the high speed oscilloscope, spectrum analyzer and network analyzer
• Skilled with SI/PI simulation tools from ANSYS, Cadence, Keysight and others.
• Skilled in data processing with script in Python, Matlab or other languages.
• Experience in MIPI D-PHY, C-PHY and PAM-4 is a plus.
• Good communication skills and team work.
• MS/PhD