As a PDE Central Yield Enhancement (YE) Engineer within Package Development Engineering (PDE), you will own and execute yield learning and improvement activities across advanced package technologies during HBM and NCG New Product Introduction (NPI). Your scope includes yield monitoring, excursion response, and yield stabilization, with an emphasis on rapid learning, early risk identification, and scalable solutions. 

This role plays a key part in driving robust yield performance from first silicon through NPI ramp and early HVM, partnering closely with Process Integration (PI), MRDA, Process Engineering, Assembly/Test Manufacturing and Quality teams. You will act as a hands‑on yield owner for NPI builds, translating data into actionable insights, driving fast learning cycles, early risk detection, and leading disciplined yield recovery. 

Job Responsibilities 

Yield Loss Accounted For 

• Account for HBM NPI builds across PWF, Assembly, and test through defect breakdown and PFA submission to understand fail mode 

• Own and execute assigned Central YE responsibilities for HBM NPI program, work closely with PI to identify defects that is coming from their area to brainstorm for CIP 

• Learn NPI processes, phase gates, and yield best practices 

• Assist in maintaining yield dashboards and trackers. Support PI/PE/RDA in identifying and transforming processing data to account/ breakdown a yield loss 

Yield Deviation Control 

• Analyze and report on yield deviation issue and trigger action from PI, PE or RDA 

• Support block run and partial conversion build yield analysis to early detect any impact on yield 

• Work closely with PCS team to identify SPC or FDC charts to put into YLR dashboard for shift left monitoring 

Yield Improvement Opportunities 

• Brainstorm with staff from other departments for improvement opportunities and propose to PI 

• Design and implement new solutions, including hotspot analytics, to improve the effectiveness of the automated defense line system. 

• Utilize software tool like Auto-diagnostics to find yield improvement opportunities 

Integrating Artificial Intelligence 

• Integrates AI-assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgement and complying with organizational standards and legal requirements 

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI-enabled enhancements within one’s scope of work 

Job Requirements 

• Bachelor's or Master's degree in Electrical/ Electronics Engineering/ Computer Engineering / Computer Science with 2 to 5 years of experience in semiconductor industry, specifically involving yield analysis, defect/root cause investigation, or data-driven process optimization in advanced memory (HBM, DRAM, NAND) or high-volume semiconductor packaging. 

• Proficiency in Python (e.g., Pandas, NumPy) and SQL for semiconductor manufacturing data analysis, with hands-on experience developing interactive dashboards and visual reports using tools (including Spotfire and Power BI/Tableau) to translate large manufacturing datasets into actionable yield and process improvement insights. 

• Demonstrated experience building automated reporting workflows, data pipelines, or process automation solutions using Python scripting or RPA tools within a semiconductor manufacturing environment, with the ability to drive cross-functional decisions across manufacturing, process integration, and engineering teams in the semiconductor industry. 

• Ability to apply baseline digital fluency and role-appropriate AI literacy to use AI-enabled tools responsibly and effectively for research, analysis, content creation, problem-solving, operational tasks, and achieving business outcomes 

Embody Micron’s Core Values 

• People – Respect, develop, and empower others. 

• Innovation – Drive continuous improvement and breakthrough thinking. 

• Tenacity – Show grit and determination. 

• Collaboration – Build trust and foster teamwork. 

• Customer Focus – Deliver excellence and value 

Critical Development Cloud Support Engineer (Senior Engineer, Hybrid Cloud) 

Job Description 

• Provide technical support for maintenance, patching, and upkeep of Microsoft, Nutanix and Citrix server systems, load balancers, and proxies. 

• Assist in managing compliance-related tasks to ensure regulatory adherence. 

• Collaborate in troubleshooting and resolving system issues to minimise downtime. 

• Support day-to-day service and change requests, ensuring timely and efficient delivery. 

• Manage IT equipment inventory, including tracking, condemnation, and disposal processes. 

• Coordinate with vendors and clients to facilitate deployments, system refreshes, and other technical initiatives.  

Qualifications 

• At least Degree in Computer science / IT / Engineering or equivalent 

• Good technical skills in engineering, computer, and IT systems, and preferably in communications technologies as well 

• Good working knowledge of Life Cycle Management and Systems Engineering in Windows server platform not limited to Microsoft System Centre suite of products. 

• Proficiency in Microsoft Server Operating System, Nutanix Acropolis Hypervisor, Ubuntu, Redhat, ⁠Citrix Virtual Desktop, BeyondTrust PIM/PAM, RSA Security Appliance, Splunk, Solarwinds, Tenable VMS, Veeam Backup, Ansible Automation Platform, Tenable VMS etc. 

• At least 1-3 years’ experience in Information Technology industry in the areas of Microsoft, Nutanix or Citrix system implementation, project management and O&S. 

• Good communication and writing skills 

• Shall have experience in performing project management, handle technical challenges and in liaising with the user and vendor to define business requirements and deliver technical solution. 
  

  JOB-00487
  

  All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

  Kindly email your resume in a detailed Word format to swathi.dhar@peopleprofilers.com

  Only shortlisted candidates will be notified.

  People Profilers Pte Ltd

  20 Cecil Street, #08-09 PLUS Building Singapore 049705

  +65 6950 9747   

  EA Licence Number: 02C4944

  Reg. Number: R1111371

  EA Personnel: Swathi Dhar
  

Job Description

• Industry/ Organization Type: Manufacture of Electrical Power Distribution, Control and Automation Systems
• Position Title: Electrical Design Engineer / Senior Electrical Design Engineer
• Working Location: Tuas Crescent (Transportation Provided)
• Working Hours: Monday – Friday, 8.15am – 5.45pm
• Salary Package: Basic + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Lead major projects within the Design Department, accountable for the full project lifecycle and team results.
• Plan, assign, and supervise design tasks; mentor and guide the design team.
• Review and approve drawings and technical documents from the team.
• Ensure proper implementation of design controls and maintain quality standards.
• Prepare material requisition lists for projects.
• Design electrical switchboards, control panels, and consoles per client requirements and company standards.
• Create and submit approval/shop/final drawings, short circuit calculations, and instruction manuals.
• Coordinate with clients and consultants regarding technical requirements; participate in technical meetings as needed.
• Communicate technical changes and variations to Sales & Marketing for claims or contract adjustments.
• Liaise with production to follow up on design and shop drawings.
• Support Sales & Marketing with technical input and backup for contract bidding.
• Continuously improve department workflow to increase efficiency and reduce waste.
• Follow and enforce Quality Management System procedures.
• Carry out other tasks as directed by supervisors.

APPLY NOW!!!

• Diploma or higher in Electrical Engineering.
• Minimum 3 years of relevant experience.
• Experience in switchboard/panel design (marine or industrial) is an advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #78314 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Responsibilities:

• Handle end to end sales & project process.
• Prepare all relevant documentations, schedules, presentations & mock-ups.
• Attend project coordination meetings offsite & onsite.
• Coordinate between internal and external Clients, ensuring production and project completion is on time.

Requirements:

• Minimum Diploma or equivalent.
• Proficient in Microsoft Office.
• Team player with good communication skills.
• Good organizational skills with ability to prioritize work.
• Resourceful & able to work independently.
• Positive attitude with good problem-solving skills.

Candidate with the following requirements will be advantageous (not a necessity):

• Knowledge in AutoCAD & Architectural Drawings.

Responsibilities:

• Research, design and develop lighting systems and modules for customised products or new products.
• Evaluate and develop design improvement, technical solution and cost reduction for existing products.
• Analyse manufacturing problems and recommend solutions.
• Perform and check engineering calculations and prototypes to verify product design and production methods.
• Source for and evaluate suppliers, components and products.
• Create, monitor and evaluate test programs to verify/validate product performance.
• Prepare calculations, schedules, reports, drawings and other related documentations and analysis.
• Create, check and maintain appropriate engineering documentations in support of a product design, in accordance with Company’s procedures.
• Provide sales, production, operations and project teams with technical and design support onsite and offsite.
• Track project status and coordinate for successful testing, commissioning and completion.
• Maintain library of research data, detailed methods, evaluation of components, materials, products and production methods.

Requirements:

• Bachelor Degree in Engineering (or similar based on experience).
• Minimum 5 years of relevant working experience.
• Portfolio of products designed and produced.
• Examples of solutions engineered.
• Proficiency in the use of Microsoft Office, AutoCAD 2D/3D and lighting calculation software.
• Experience in 3D printing.
• Experience in manufacturing processes and materials.
• Advanced analytical, critical thinking and decision-making skills.
• Interest in research, dive deep on subjects and able to self-learn.
• A keen eye for detail, organized, resourceful and independent.
• Team player with excellent written, pictorial and verbal communication skills.
• Good project management skills.
• Positive attitude and commitment to make a difference.

Benefits & Others:

• 5.5-day (alternate Saturday) work week.
• Training will be provided.

Roles & Responsibilities

Project (Civil) Engineer

Civil engineering projects - Roadworks, Cycling Infrastructure, Lift Shaft

1. Responsible for advanced Planning, designing, integrating, scheduling, budgeting of construction project including management of contractors and vendors
2. Responsible for supervising and assessing the set-up of all project components, manage all aspects of an engineering project, prepare schedules, communicate with clients, project progress.

Job Responsibilities :

Project Management:

You will be responsible for managing the entire project lifecycle, from initial planning to project completion. This includes defining project objectives, developing project plans, allocating resources, and ensuring that the project is delivered on time and within budget, actively involve in site and progress coordination, Method statement, submission and approval, monitor licenses, permits and compliances.

Technical Expertise:

Prossess a strong technical background in your field of expertise. Apply your knowledge and experience to solve complex engineering problems, provide technical guidance to the project team, and make critical decisions regarding design, implementation, and testing.

Stakeholder Communication:

Act as the primary point of contact for project stakeholders, including clients, contractors, vendors, and internal departments. Communicate project updates, address concerns, manage expectations, and ensure effective collaboration between all parties involved.

Risk Management:

Identify potential risks and develop strategies to mitigate them. This includes conducting risk assessments, implementing risk mitigation plans, and monitoring risks throughout the project.

Documentation and Reporting:

Maintain accurate and detailed project documentation, including technical specifications, engineering drawings, progress reports, and other relevant records. Prepare regular status reports and presentations for project stakeholders, providing updates on project milestones, risks, and overall performance.

Job Requirements:

• Degree in Civil Engineering or related qualifications preferably recognized by the PE Board
• Minimum 4 years of relevant experiences in the construction industry
• Meticulous, independent and able to work within tight deadlines
• Excellent interpersonal and communication skills

Summary

Focuses on optimizing production processes by anAs an Industrial Engineer, you will play a key role in optimizing production processes and driving operational excellence. By analyzing workflows, conducting time studies, and implementing efficiency improvements, you will help shape a smarter, leaner, and more productive manufacturing environment.

Responsibilities

• Develop and implement strategies to optimize production layouts and maximize resource utilization.
• Analyze time studies and production metrics to enhance productivity and minimize waste.
• Collaborate with cross-functional teams to design efficient workflows and improve ergonomic standards.
• Lead initiatives focused on cost reduction, process improvement, and continuous enhancement of manufacturing practices.
• Utilize software tools such as SketchUp Pro and AutoCAD to design layouts, run simulations, and validate process improvements.

Requirements

• Minimum 5 years of experience in industrial engineering, with proven expertise in line balancing, cycle time analysis, and process optimization.
• Proficiency in layout and simulation tools (AutoCAD, SketchUp Pro, or equivalent).
• Strong knowledge of Lean Manufacturing principles and Six Sigma methodologies.
• Excellent analytical, communication, and project management skills.
• Demonstrated ability to collaborate across departments and lead improvement initiatives.

Key Responsibilities

• Provide after-sales service support for control systems including DCS/SIS, SCADA (FAST/TOOLS, STARDOM) and ExaQuantum to both internal and external customers.
• Receive and manage customer inquiries, service requests, and complaints related to installed systems and products.
• Deliver technical support and troubleshooting using specialized knowledge of control systems and related applications.
• Maintain strong working relationships with customers and internal stakeholders, particularly for technical and service-related matters.
• Coordinate with local country offices and Yokogawa Headquarters (Global Response Centre) to resolve technical issues and service cases.
• Support global dispatch activities for troubleshooting, commissioning, and on-site technical assistance to ensure customer satisfaction.
• Participate in 24-hour standby duty rotation, including overseas deployment on short notice for urgent support.
• Assist the Response Center Manager in managing crisis reports, service notes, complex issues, and affiliate dispatch requests.

Requirements

• Minimum 5 years of experience in control system engineering, such as DCS, SIS, SCADA, STARDOM, ExaQuantum, PLC, or equivalent systems.
• Hands-on experience with systems such as CENTUM VP, ProSafe-RS, or similar industrial control platforms is an advantage.
• Strong troubleshooting, servicing, and maintenance skills in distributed control systems and industrial networks (e.g. L2/L3, firewalls).
• Conduct service, maintenance, and troubleshooting training for local country offices
• Ability to work independently and collaboratively in a fast-paced, customer-focused environment.
• Good communication and coordination skills to work with global teams and stakeholders.
• Willingness to be on standby and travel overseas on short notice when required.

To ensure all applications are consolidated and processed through our central Applicant Tracking System (ATS), candidates are requested to submit their applications exclusively via the link below:

https://wd3.myworkdaysite.com/recruiting/yokogawa/yokogawa-career-site/job/Bedok/Technical-Support-Engineer_R-10359

By responding to Yokogawa’s advertisement, consent is considered given to Yokogawa to collect the required personal data for the purpose of recruitment with expectation that Yokogawa will protect personal data with security safeguards that are reasonable and appropriate to the sensitivity of the personal data, to protect it from unauthorized access, use or disclosure and complies with applicable regulatory requirements with respect to the retention of personal data.

We regret to inform that only shortlisted candidates will be notified.

Yokogawa is an Equal Opportunity Employer. Yokogawa wants a diverse, equitable and inclusive culture. We will actively recruit, develop, and promote people from a variety of backgrounds who differ in terms of experience, knowledge, thinking styles, perspective, cultural background, and socioeconomic status. We will not discriminate based on race, skin color, age, sex, gender identity and expression, sexual orientation, religion, belief, political opinion, nationality, ethnicity, place of origin, disability, family relations or any other circumstances. Yokogawa values differences and enables everyone to belong, contribute, succeed, and demonstrate their full potential.

Business Systems Analyst (Forward Deployed Engineer) | Up to $9,000 | Central | Mon-Fri

Are you passionate about transforming business processes through AI, automation, and digital solutions? Join a growing team driving AI adoption and process innovation across multiple business functions.

Salary & Benefits

• Responsible for direct sale of vacuum pumps, systems, parts and services in Singapore.
• Break new grounds and penetrate the key industries as in; Food Packaging, Medical, Petrochemical, Chemical, Automotive, Pharmaceutical, Electronics, Semiconductor
• Undertake the role to develop new and key accounts and strive towards achieving sales goals and objectives.
• Engage the customers on a day-to-day basis to initiate and coordinate sales activities.
• Responsible for quarterly Sales forecasting and meeting monthly and yearly “Sales” target for Singapore region.
• Track and report sales activities using CRM system.
• Handle sales inquiries and generate proposal to customers for sale of pumps, repair, field service and spare parts.
• Create sales leads, follow up on sales opportunities and take ownership to follow up on quotations.
• Working closely with customers to find application possibilities and propose suitable technical solutions.
• Conduct competitive analysis and identify market price for various customers and market segments in Singapore.
• Conduct product and application training.
• Other adhoc duties as assigned

Joy Yeow Zhi Qian
(CEI Registration No:R2096261)
Recruit Express Pte Ltd (EA Licence No: 99C4599)

• Identify, evaluate, and pursue new business opportunities and developing strategies to increase sales.
• Actively develop commercial prospects and convert leads into execution.
• Ensure all prospects and leads are accurately updated.
• Work closely with operations teams to ensure smooth and effective service execution.
• Develop and maintain strong working relationships with customers.
• Monitor customer satisfaction and ensure timely NPS update.

Joy Yeow Zhi Qian
(CEI Registration No: R2096261)
Recruit Express Pte Ltd (EA Licence No: 99C4599)

Job Purpose

The Research Fellow / Research Engineer (with focus on Data Analytics and Digital Dashboards) will support applied research and innovation in community and allied health by turning clinical, operational and service data into practical analytics outputs, digital dashboards, KPI trackers and evidence reports. The role focuses on hands-on data analytics, project coordination and implementation support for community care projects.

This role is focused on Data Analytics and Digital Dashboards. The candidate should have good project-management discipline and experience coordinating projects or workstreams with clear outcomes delivered. The Research Fellow / Research Engineer will support academic staff and project leads, and contribute his/her assigned share to team-level KPI targets through timely and usable analytics outputs.

Key Responsibilities

Applied Research & Development

• Perform clinical needs assessment and workflow analysis for organisational innovation transition, focusing on but not limited to the community and aged care sector, including nursing homes, hospitals, home-based care, and palliative care settings.
• Develop healthcare solutions and innovation roadmaps for organisational transition, focusing on but not limited to long-term bedridden patient care, caregiver workload reduction, and care automation.
• Develop and execute healthcare innovation projects by conducting experiments, data collection, and analysis for Proof of Concept (POC) and implementation for organisations in, but not limited to, the community care sector, and simulated environments within SIT and / or the Living Lab.

Industry Collaboration

• Support collaborations with industry partners to understand problem statements and contribute to solution development.
• Assist in project scoping by gathering technical inputs and identifying relevant capabilities within the ecosystem (IHLs, research centres, industry partners).
• Participate in industry meetings, discussions, and project engagements.

Project Execution & Support

• Assist Professional Officers, faculty and project leads in planning, coordinating and executing assigned project workstreams, including timeline tracking, documentation and follow-up on deliverables linked to the committed KPI areas: service volume, innovation initiatives, value capture, manpower training and ecosystem establishment.
• Generate technical reports, presentations, dashboards, project trackers, and documentation on the development, validation, deployment, and value capture of healthcare solutions and applications.
• Contribute to grant proposals and project submissions where required.
• Track project progress and maintain proper documentation of milestones, deliverables, risks/issues, partner inputs, funding status and measurable outcomes for assigned projects.
• Support the IaaS Center for Community and Allied Health Innovation in achieving team-level KPI outcomes through assigned analytics, documentation and project support tasks.
• Contribute to assigned analytics workstreams and projects, including data analytics projects and digital dashboard development for industry partners, hospitals, aged care homes, and non-profit organisations, encompassing proposal development, partner engagement, analytics scoping, and project documentation.
• Coordinate assigned workstreams within the team's innovation portfolio, supporting the delivery and deployment of new or improved products, processes, and services to healthcare and community organisations, while monitoring implementation, adoption, and analytics evidence to support value-capture documentation.
• Support training, demonstration, and workshop delivery for company employees and healthcare professionals, contributing to the team's capability-building and knowledge-transfer goals.
• Role-specific skill focus — Data Analytics and Digital Dashboards: clean, structure, analyse, visualise and report health/service data; develop dashboards, KPI trackers and management reports; support evidence for KPI and project-outcome reporting, including outreach to companies and/or healthcare providers; and translate data insights into practical recommendations for Professional Officers, faculty, project leads and healthcare partners.

Job Requirements

• Bachelor's degree with 5+ years experience OR Master's degree with 2+ years experience in Nursing, Health Sciences, Biomedical Engineering, Clinical Research, or a related field or related disciplines with relevant experience in research, engineering, product development, or healthcare innovation related work.
• Strong knowledge and experience in clinical workflows, particularly in hospitals, nursing homes, home-based care, palliative care settings and other community care settings.
• Hands-on experience in clinical validation studies, including patient needs assessment and usability testing, is highly advantageous.
• Possess understanding of healthcare innovation concepts (e.g., commercialisation, care automation, health economics).
• Strong analytical skills and attention to detail. Excellent written and verbal communication skills.
• Resourceful, meticulous and problem-solving attitude.
• Experience supporting or coordinating industry or applied research projects, preferably involving healthcare, community care, aged care, allied health, digital health, clinical workflow optimisation or healthcare innovation solutions.
• Ability to document project outputs, implementation progress, stakeholder benefits and other measurable outcomes for assigned work.
• Experience supporting project proposals, funded projects or partner engagements will be advantageous.
• For this Data Analytics and Digital Dashboards role, relevant experience in data analytics, dashboard development, business intelligence, data visualisation, health/service data management, KPI tracking, data cleaning, statistical or operational reporting, or equivalent analytics tools and methods is required.
• All Research Fellow / Research Engineer must possess project-management skills and experience managing or coordinating projects/workstreams with good outcomes delivered, including scope, timeline, stakeholder coordination, risk/issue tracking and documentation.

Key Competencies

• Possess understanding of healthcare challenges faced by industries locally and globally, particularly in the community and aged care sectors.
• Strong interpersonal and communication skills to communicate effectively with industry partners and stakeholders.
• Ability to work collaboratively in a cross-functional and multidisciplinary environment.
• Proactive approach to continuous learning and development in the healthcare innovation field.
• Proficient in technical writing and presentation.
• Possess good analytical and critical thinking skills.
• Shows good initiative and takes ownership of work undertaken.
• Project management skills, including planning and execution of healthcare innovation projects.
• Project-management discipline to support assigned workstreams, monitor timelines and dependencies, escalate risks, and complete agreed tasks that contribute to team targets.
• Outcome orientation, with ability to document project outputs, stakeholder benefits, implementation progress and individual contribution within a team-based delivery model.
• Capability in data analytics and dashboards, including data cleaning, data structuring, analysis, visualisation, dashboard development, KPI tracking and preparation of concise reports.
• Ability to coordinate stakeholders, monitor timelines and risks/issues, and deliver assigned project outcomes with clear documentation.
• Ability to work as part of a coordinated delivery team, with clear documentation of assigned analytics outputs and project outcomes toward the overall KPI commitments.

Job Purpose

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT. 

The primary responsibility of this role is to contribute to an industry innovation research project on developing artificial intelligence (AI) solutions for train operations and maintenance. 

Key Responsibilities

• Work closely with faculty members, researchers, students, and collaborators on research activities and technology development.
• Support research and development in Artificial Intelligence and related areas for train operations and maintenance.
• Assist in the coordination and management of the research project.
• Coordinate finance tracking, reporting, and communications with industry and research partners. 

Job Requirements

• Bachelor/Master/PhD degree in Computer Engineering, Computer Science, Artificial Intelligence, Data Science, Electrical Engineering, or related disciplines.
• Experience in project management, research administration, or coordination of large-scale projects is highly preferred.
• Familiarity with finance management, budget tracking, procurement, or grant administration will be an added advantage.
• Experience in areas such as Machine Learning, Deep Learning, Computer Vision, Large Language Models, Data Analytics, or Intelligent Systems will be advantageous.

Key Competencies

• Prior experience in research project coordination and management
• Basic knowledge about finance tracking and reporting
• Capabilities of communication and organisational skills

Working days: either 4 days 12 hours rotating shift or 5 days work week

Location: Islandwide , office at Woodlands

Salary: $2800 -$3500 depends on experience

Job scope:

• Semiconductor machines startup and installation

• Perform equipment on-site installation, diagnosing, troubleshooting, servicing, and repairing

• Perform equipment continuous improvement programmes, preventive maintenance, modifications and repairing works

• Serves as company contact point with customer on technical matters

• Attends to customers complaints and provides timely solutions

• Other ad hoc duties

Requirements:

• Nitec/ Diploma in Mechanical/ Mechatronic Engineering or related discipline

• Hands-on experience in semiconductor machine maintenance

• Able to work in cleanroom environment
  

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Forward Deployed Engineer – AI, Automation & Business Systems| Up to $9,000 | Central | Mon-Fri

Are you passionate about transforming business processes through AI, automation, and digital solutions? Join a growing team driving AI adoption and process innovation across multiple business functions.

Salary & Benefits

Lead Repair Development Engineer, Joining Technology

Salary: Up to $8,500/month + AWS + Variable Bonus
Benefits: Transport Provided
Location: Pioneer

Key Responsibilities

• Lead the development and industrialization of advanced joining and repair technologies to support manufacturing and repair operations globally.
• Design and implement innovative repair solutions to support new product introductions and component repair strategies.
• Develop validation plans for repair materials and laser cladding technologies in collaboration with New Repair Introduction teams.
• Drive successful technology transfer and qualification of repair service centers, ensuring compliance with repair standards and certifications.
• Execute engineering projects involving process design, analysis, evaluation, and continuous improvement initiatives.
• Provide technical expertise in joining technologies, including welding, brazing, laser cladding, and related metallurgical processes.
• Monitor project progress, communicate key developments, and ensure timely delivery of objectives.
• Maintain high-quality technical documentation in accordance with engineering and business requirements.
• Identify and implement productivity and process improvement opportunities across the global repair network.
• Collaborate closely with component engineering, manufacturing, supply chain, and global stakeholders to deliver impactful solutions.

What We're Looking For

• Bachelor's Degree in Welding, Materials, Manufacturing, Mechanical Engineering, or a related engineering discipline.
• 8 years of manufacturing experience, including at least 5 years specializing in joining technologies.
• Knowledge of industrial gas turbine components and repair technologies.
• Exposure to thermal spray coatings, surface finishing, machining, sealing, and related repair processes.
• Strong expertise in:
• Laser cladding processes
• Superalloy welding and brazing metallurgy
• Numerically Controlled (NC/CNC) machinery
• Solid understanding of manufacturing and repair processes within industrial environments.
• Familiarity with Lean Manufacturing principles and continuous improvement methodologies.

If you're passionate about advanced manufacturing, materials engineering, and developing world-class repair technologies, we'd love to hear from you.

Job Description:

• General Failure Analysis Engineer
• Perform sample preparation (cross section, parallel lapping, chemical decapsulation), use of ion miller, FIB and other preparation techniques;
• Perform failure analysis using various tools and instruments such as SEM, EDX, 2D/3D X-ray;
• Communicate with customer for selecting proper analytical technique and data interpretation;
• Prepare analytical reports;
• Assist in new failure analysis techniques development;
• Perform routine instrument preventive maintenance and laboratory housekeeping

Job Requirements:

• At least Degree in Electrical / Electronic Engineering; Material Science Engineering; Science & Technology; with a minimum of 2 years of relevant working experience.

• Candidates without experience are welcome to apply;
• Must be able to perform FA study individually and work well in teams;
• Maintain good 6S practice during daily operation;
• Experience in FA techniques including: Sample preparation (cross section, parallel lapping, chemical decapsulation), X-Ray, SEM and FIB would be a bonus;
• Experience in Wafer Fab/Semiconductor/LED/Solar/HDD industries would be useful;
• A team player who can be independent, hardworking with a persevering attitude.

• Well-Established Company
• Basic $3500 to $5000 + AWS +Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: WEST
• Normal Working Hours (Mon to Fri)

Job Responsibilities:

• Review of tender documents

• Preparing, compiling bid proposal in accordance with the customer specification

• Coordinate and liaise with internal departments to ensure timely responses to queries subsequent to bid submission

• Liaising and seeks competitive quotations.

• Negotiate with customer and sub-contractor about pricing.

• Source for suppliers and sub-contractors for quotation for tendering.

• Ability to estimating the cost of the assigned scope and prepare bill of quantities (BOQ), Schedule of Rate (SOR), Schedule of breakdown (SOK) and Schedule of Technical Data (SOT)

• Work closely with the Engineering team to ensure project handover is carried out and that support is provided during the execution phase if required.

Requirements:

• Possess at least a Diploma or Bachelor's Degree in Mechanical or Electrical Engineering

• 2 to 4 years of relevant experience, preferably in HVAC / BMS industry.
  

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities

• Current and Expected salary

• Reason for leaving

• Date of availability

• Education background 

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• In charge of establishing the process and work in the team to implement risk management best practices in projects
• Implement and maintain the office's ISO 13485 and IEC 62304 compliant quality management system processes and procedures across departmental work and projects.
• Responsible in providing guidance and development support to the projects handled
• Taking charge of validating and advising project teams on regulatory, quality and risk requirements
• In charge of implementing and maintaining ISO 13485 and IEC 62304-compliant quality management system processes and procedures
• Responsible in
• In charge of managing project tasks which includes ensuring of timely completion of project milestones and meeting KPIs
• In charge of compliance with quality, regulatory and organisational policies and systems while supporting required record-keeping and documentation.

Requirements:

• Min Degree in Engineering /Science or relevant
• Min 2 years of working experience in QMS, Risk Management and design & development in medical industry
• Experience in ISO13485 /IEC62304 audit is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Oil & Gas industry with experience in Supplier Quality
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Diploma in Aersopace Engineering or relevant
• Minimum 2 years of working experience as Licensed Aircraft Engineer with ATR

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Diploma in Aersopace Engineering or relevant
• Minimum 2 years of working experience as Licensed Aircraft Engineer with ATR

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• Manage and oversee day-to-day construction management of project

• Monitor and report to Senior / Project Manager of project progress versus baseline,

including issues and risks in a timely manner

• Conduct VSCC and take charge of ship work safety and cleanliness

• Liaise with trades on the activities and construction effort needed to achieve progress safely, within schedule and budget

• Plan, develop and organize the construction effort to formulate the most cost-effective plan

to support schedule and cost

• Ensure all changes to specifications, work scope and drawings are documented

• Review man hours and duration forecasts to completion and resource requirements

• Monitor construction productivity and schedule performance and investigate reasons for less than satisfactory performance

• Manage schedule, cost-to-completion (CTC) and POC together with Senior / Project Manager

• Conduct progress meetings to manage issues

• Responsible for planning, scheduling and costing

• Support in project tender when called upon or any other adhoc project duties as required

• Handle warranty issues

• Manage customer expectations at site and maintain good customer relationships

Requirements:

• Diploma/Degree in Marine/Mechanical/Naval Architecture
• Preferably possess 1 years experience in newbuild or ship repairs related projects
• Completed Ship Repair Manager Course
• Project Management Skills in the following areas: Planning scheduling and costing, Risk management, Manpower management, Customer Relationship management.
• Able to deal and communicate with people effectively at all levels on the ground, identify and manage issues, cost consciousness and urgency to get things done
• Familiarity with project management software such as Primavera or MS Projects will be advantageous
• Able to work on weekends based on project needs
• Only Singapore Citizens will be considered for this role

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

As a Full Stack Engineer based in our Singapore office at SMBC, you'll be a key technical contributor and mentor to our digital banking transformation initiatives in Asia Pacific. This is a senior individual contributor role that combines solution architecture, hands-on development, and technical mentorship to deliver scalable, reliable banking solutions across web and mobile platforms.

You'll work at the intersection of multiple technology domains, designing cloud-native solutions that balance immediate project needs with long-term architectural flexibility. Your work will directly impact how our clients interact with banking services across digital channels, requiring both deep technical expertise and the ability to navigate complex cross-domain dependencies. Additionally, you'll play a crucial mentorship role for more junior engineers, elevating the team's technical capabilities through code reviews, pairing sessions, and knowledge sharing.

About the Opportunity

• Technical Impact: Lead solution design for major features while remaining deeply hands-on with code
• Architectural Influence: Shape the technical direction of SMBC's digital banking platform
• Global Collaboration: Partner with onshore and offshore delivery teams to deliver enterprise-scale banking solutions

Key Responsibilities

Solution Design & Architecture

• Break down complex, ambiguous problems into actionable solutions with clear knowns, unknowns, and resolution paths
• Design cloud-native architecture that enables multiple future scenarios without over-engineering for uncertainty
• Understand and articulate scaling and reliability limits across major business-critical systems
• Map data relationships and dependencies across technology domains and their impact on the platform

Technical Delivery & Excellence

• Work directly with project delivery teams to translate requirements into high-quality technical implementations
• Write clean, maintainable, well-tested code across the full stack as needed
• Conduct proof-of-concepts to evaluate new technologies and approaches when needed
• Ensure comprehensive observability: everything that can be measured is measured
• Champion engineering best practices including testing, documentation, and code quality standards

Mentorship & Knowledge Sharing

• Pair with engineers to elevate software development practices and accelerate knowledge transfer
• Foster a culture of continuous learning and technical excellence within the team

Collaboration & Communication

• Coordinate across technology domains to ensure alignment and integration
• Create clear, effective technical documentation for diverse audiences
• Facilitate honest technical debates that strengthen decision-making and team dynamics
• Evangelize new ideas, tools, and processes through compelling presentations
• Collaborate with DevOps teams on infrastructure and deployment strategies

Continuous Improvement

• Stay current with emerging software technologies and share knowledge with the team
• Proactively seek feedback on architecture decisions to refine approaches
• Bring new ideas and present them in clear, well-reasoned ways
• Identify technical debt and advocate for its resolution

Required Qualifications

Technical Expertise

Must demonstrate high proficiency in at least 4 of the following areas:

• Full Stack Development: 5+ years of hands-on experience with modern web technologies like React/Next.js, Node.js for front-end and/or Java/Spring Boot or similar for back-end technologies
• Cloud Architecture: Solid experience designing and implementing solutions on Azure (preferred) or AWS/GCP, including microservices and cloud-native patterns
• Mobile Development: Experience with React Native, Flutter, or native iOS/Android development
• Testing & Quality: Strong experience with test automation frameworks and strategies across the testing pyramid (unit, integration, end-to-end)
• DevOps Practices: Good understanding of CI/CD, Infrastructure as Code, containerization (Docker/Kubernetes), and observability
• Database & Data Systems: Experience with both SQL and NoSQL databases, caching strategies, and event streaming
• API Design: Strong skills in RESTful API design, GraphQL, and API gateway patterns

Professional Qualities

• Demonstrated ability to learn new domains and technologies quickly (growth mindset)
• Strong sense of appropriate technical trade-offs in design and implementation
• Track record of completing projects and finishing what you start
• Scrappy approach: making the most with available resources
• Clear, effective communication in both written and verbal formats
• Comfortable facilitating conference calls and remote collaboration
• Ability to communicate effectively with technical and non-technical stakeholders
• Strong mentoring and teaching abilities - able to explain complex concepts clearly
• Proactive in seeking feedback and continuously improving
• Comfortable with honest, constructive debate that strengthens outcomes
• Hands-on mentality: willing to roll up sleeves for both strategic work and day-to-day delivery

Preferred Qualifications

• Previous experience in banking, financial services, or highly regulated industries
• Exposure to corporate/institutional or wealth management/private banking business domains
• Experience working in distributed teams across multiple time zones
• Track record of successfully evangelizing technical change in large organizations
• Experience mentoring or training junior engineers in previous roles
• Active participation in tech communities through speaking, writing, or open source contributions

We have an opportunity to impact your career and provide an adventure where you can push the limits of what's possible.

As a Lead Software Engineer at JPMorganChase within the Infrastructure Platforms, Data Center Services team, you are an integral part of an agile team that works to enhance, build, and deliver trusted market-leading technology products in a secure, stable, and scalable way. You will take ownership of technical delivery end-to-end while actively engaging with stakeholders to translate business needs into well-planned, high-quality software solutions. This role demands a self-starter who thrives in a collaborative environment, can manage competing priorities, and drives engineering excellence across the team.

Job responsibilities

• Design, develop, and deliver full stack software solutions across frontend (React) and backend (Node.js/TypeScript, Python) services, applying strong problem-solving skills to break down complex technical challenges.

• Engage directly with stakeholders and product owners to gather requirements, clarify scope, and ensure technical solutions align with business objectives.

• Lead development planning activities including backlog refinement, sprint planning, effort estimation, and technical roadmap definition, ensuring the team delivers incrementally and predictably.

• Drives team adoption of enterprise-authorized AI-assisted engineering practices within the work environment to improve code quality, delivery speed, and operational outcomes (e.g., AI-assisted code review/refactoring, test strategy acceleration, incident/root-cause analysis support), while establishing consistent validation standards (secure coding, peer review, automated testing) and promoting reuse of effective patterns across the team.

• Applies knowledge of tools within the Software Development Life Cycle toolchain, including enterprise-authorized AI-assisted development and automation capabilities, to improve the value realized by automation.

• Develop secure, high-quality production code and review peers' work to maintain consistency, reliability, and adherence to engineering standards.

• Identify opportunities to eliminate or automate remediation of recurring issues to improve the overall operational stability of applications and systems.

• Maintain clear and organised documentation including technical designs, architecture decisions, and runbooks, ensuring knowledge is shared and accessible.

• Leverage AI-assisted development tools (e.g., GitHub Copilot, AI code review assistants) to improve productivity, code quality, and delivery speed, and champion their effective adoption within the team.

• Participate in communities of practice across Software Engineering to drive awareness and adoption of modern tooling, patterns, and best practices.

• Mentor and support junior engineers

Required qualifications, capabilities, and skills

• Bachelor’s Degree in Computer Science, Cybersecurity, Data Science, or related disciplines

• Formal training or certification in software engineering concepts and 5+ years of applied experience delivering production software.

• Hands-on practical experience across the full Software Development Life Cycle, including system design, application development, testing, CI/CD pipelines, and operational support.

• Strong proficiency in frontend development with React (including state management and testing with Jest/React Testing Library).

• Advanced knowledge in backend development using Node.js and TypeScript to build RESTful APIs, along with strong experience in writing and maintaining comprehensive unit, functional, and integration tests.

• Demonstrated ability to communicate effectively with technical and non-technical stakeholders, translating business requirements into actionable technical plans.

• Experience working collaboratively in agile teams and participating in Scrum ceremonies (stand-ups, retrospectives, sprint planning); experience facilitating or running ceremonies.

• Demonstrated experience leading effective use of approved AI-assisted software development tools (e.g., for coding, code review, test acceleration, troubleshooting) with the ability to set team expectations for validating AI outputs for correctness, performance, and security.

• Strong understanding of responsible AI use in engineering workflows, including data sensitivity considerations, secure handling of inputs/outputs, and adherence to resiliency and security expectations; experience coaching engineers on safe, compliant adoption within delivery practices

• Experience with databases such as MySQL or similar, along with exposure to cloud platforms and infrastructure-as-code practices, and familiarity with API documentation standards such as OpenAPI/Swagger.

Preferred qualifications, capabilities, and skills

• Experience with other modern frontend frameworks (e.g., Angular). Experience with Python for backend services or tooling.

• Proficiency with design and prototyping tools such as Figma for collaborating on UI/UX requirements is highly desirable.

• Experience with traditional AI/ML, such as predictive analysis, is highly desirable.

To apply for this position, please use the following URL:

https://ars2.equest.com/?response_id=1d56fbfcc83ec916eb3d6e4d4a22d847