Total 13,384 job vacancies in Singapore

Position Overview:

• As a design verification engineer, you will be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

• Experience in UVM verification methodology
• Disciplined, quality-minded, and highly driven for excellence,
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience, but are open to fresh graduates with outstanding results
• Candidates with relevant experiences would be offered as Staff or Sr. Staff, taking on higher responsibilities
• Experience in video processing and video analytics is a plus
• Passionate and strong in general programming is a plus

Position Overview:

As a Sr. Staff signal integrity engineer, you will be working on challenging SI and PI tasks in globally distributed teams. You will be supporting SI/PI signoff of chip design, package design and PCB design in order to support successful delivery of products of various product lines to market. You will be working with design, test, P&R and application teams globally for modeling of chip high speed I/O and power rails. You will be supporting customers in signing off hardware design or resolving SI/PI issues where system design has constraints. You will also be involved in defining specifications of product electrical performance. You may also be involved in modeling and simulation of EMC issues.

Responsibilities:

Primary (70%):

• Responsible for SI/PI signoff of chip design, package design and PCB design.
• Responsible for modeling high speed I/O and PDN.
• Responsible for customer support for PCB design signoff and issue debug.

Secondary (30%):

• Responsible for product electrical specifications related to high speed I/O.
• Responsible for modeling and simulation of EMC issues.

Requirements:

• 10+ years of working experience in SI/PI
• Deep understanding of electromagnetic theory, transmission line theory and microwave theory
• Familiar with SI/PI design flow, time domain and frequency domain modeling and simulation
• Good comprehension of PLL, equalization, CDR, jitter, noise, IBIS modeling, 8b10b encoding
• Hands on experience with lab equipment such as the high speed oscilloscope, spectrum analyzer and network analyzer
• Skilled with SI/PI simulation tools from ANSYS, Cadence, Keysight and others.
• Skilled in data processing with script in Python, Matlab or other languages.
• Experience in MIPI D-PHY, C-PHY and PAM-4 is a plus.
• Good communication skills and team work.
• MS/PhD

Main Responsibilities

• Collaborate with the Customer Service Representative to timely resolve client's security system issues.
• Deliver comprehensive support and maintenance services, encompassing routine preventative maintenance, troubleshooting, system upgrades, expansions, alterations, and systems training.
• Create detailed system diagrams using AutoCAD software.
• Build strong partnerships with clients while continuously striving to enhance customer satisfaction.
• Maintain the support & maintenance contract renewal.
• Ensure the excellence of services by strictly adhering to company standards and policies, service requests within the designated region.
• Perform regular preventive maintenance tasks and effectively address daily troubleshooting requirements.
• Thoroughly follow up on all open technical issues until the problems are fully resolved.
• Assume ownership of all service-related issues once the External Hand Over is completed by the Project team.

Requirements

• Diploma in Electronic, Computer, Automatization or Mechanical Engineering.
• Experience in security system field with knowledge of Access Control or CCTV is a must.
• Basic IT knowledge in hardware, network and database
• Ability to work under pressure.
• Strong analytical skill and problem-solving ability.
• Strong self-learning ability, work independently.
• Customer-orientation.
• Excellent communication and interpersonal skills.
• Required to stand-by for night jobs (Rotational basis)

Interested applicants please send your resume to venessagoh@recruitexpress.com.sg

Venessa Goh Wee Ni

R24124686

Recruit Express Pte Ltd

EA License No: 99C4599

We regret that only shortlisted candidates will be contacted.

Key Responsibilities

1. Design & Engineering

2. Project Coordination

3. Testing & Commissioning

4. Documentation & Compliance

5. Maintenance & Support

Job Requirements

• Possess Diploma or Degree in engineering or facility management field
• Preferably with 1- 2 years related experience or those without working experience can be considered

RESPONSIBILITIES

1)     Administrative Functions

·       Support the Service Manager in preparation of weekly and monthly service reports.

·       Process meter billing and ensure accurate updates in the CRM system.

·       Collaborate with the Customer Service Team to ensure smooth and efficient daily service operations when required.

·       Maintain proper documentation and service records for audit and tracking purposes.

2)     Technical Functions

·       Assist in the installation, setup, and configuration of copiers/ multifunction printers(MFPs) and smart office solutions.

·       Attend to on-site service calls and urgent breakdowns, ensuring timely resolution.

·       Support engineers in troubleshooting hardware issues (machines, networking, peripherals) and software-related problems (drivers, system integration, workflow solutions).

·       Assist in deploying and troubleshooting smart enterprise solutions such as document management systems, print management software, and workflow automation tools.

REQUIREMENTS

·       Diploma in Engineering, IT, Electronics, or related discipline.

·       Experience in copier/ MFP servicing, print solutions, or office automation systems.

·       Sound knowledge of network setup (IP configuration, drivers installation).

·       Proficient in MSOffice (Excel, Power point), MCSE, HTML

·       Good communication and interpersonal skills.

·       Able to work independently and as part of a team.

·       Willing to travel for on-site servicing across Singapore.

Pleasesubmit resumes to jason.chow@oaktree.com.sg with the following details in MSWord format:

·      Position applying for

·      Current remuneration

·      Expected remuneration

·      Notice period

Jason Chow Yew Fai

EA License No :       06C4642

EA Reg No :           R25158800

We regret that only shortlisted candidates will be notified.

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Extensive travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

• 5 Work Days Per Week
• Current Office Near to Kaki Bukit MRT
• Will Relocate To Tai Seng MRT in August 2026
• Medical & Dental Benefits Provided
• Entitled to Yearly Bonus & Performance Bonus

Current Teams are focusing on AI Agent, Computer Vision, Vision Language Models (VLMs)

Job Responsibilities: 

• Algorithm Development: Development and optimization of machine learning and deep learning algorithms to solve complex business problems. 

• Model Training and Evaluation: Participate in the construction and training of artificial intelligence models, including but not limited to neural networks, decision trees, etc., evaluate and optimize the models to improve their performance and accuracy. 

• Data Analysis and Preprocessing: Conduct data collection, cleaning, preprocessing and feature engineering, provide high-quality data for model training, and arrange and guide data labelers to carry out data labeling and other work. 

• Collaboration and Deployment: Collaborate with team members to integrate algorithm models into actual business systems, promote the implementation of projects, and realize the intelligent upgrading of products. 

• Research and Innovations: Stay up to date with the latest advancements in AI and ML technologies. Explore and deploy new technologies, drive innovations to create value to market needs, and enhance the company’s competitiveness. Audio and video algorithms for surveillance/monitoring applications which also include the research and implementation of algorithms involving target detection, feature extraction, tracking, and recognition. 

• Documentation and Reporting: Maintain comprehensive documentation of algorithms, experiments, and project workflows. Communicate results and findings to technical and non-technical stakeholders. 

Job Requirements: 

1. Bachelor's or Master's Degree in Computer Science, Applied Mathematics, Electrical Engineering, Pattern Recognition, Artificial Intelligence, Automatic Control, Operations Research, Biology, Physics / Quantum Computing, Neuroscience, Statistics or a related field. 

2. Familiar with common machine learning and deep learning algorithms and keeping track with the latest SOTA implementations. 

3. Strong programming skill in Python, C / C++, proficient in mathematical / statistical concepts and exceptional coding skills 

4. Hands-on experience with AI / ML frameworks be familiar such as Caffe, PyTorch, TensorFlow, MxNet etc. 

5. Have rich project experience in machine learning and deep learning, be familiar with common algorithm models, such as CNN, RNN, LSTM, Transformer, ViT, etc., and be able to improve and innovate models according to actual problems. 

6. Experience in familiar the design, parameter tuning and optimization methods of neural network models is a plus 

7. Experience in model compression and in the transplantation and optimization of deep learning forward inference on various platforms, including NPU / GPU / DSP / ARM on mobile platforms and CPU / GPU on server platforms is also a plus. 

8. Strong logical thinking and problem-solving ability, able to independently undertake the research and tackling of complex problems and team spirit are highly valued traits. 
   

   
   Reolink, a leader in intelligent visual technology for homes and businesses, was founded in 2009 by a group of engineers with a strong commitment to and passion for smarter security solutions. 

   Our products are now trusted by millions of users across more than 110 countries and regions worldwide. Building on this trust, we continue expanding our presence and bringing our innovations to more markets around the globe. 

   Reolink remains committed to delivering advanced, reliable, and user‑centric solutions that empower people to protect what matters most. 

• Well Established Company
• Excellent Welfare and Benefits + Career progression
• Basic $ 4500 to $ 6000 + AWS + VB
• Working location: North-East
• Working Hours: Monday to Friday (8:30am to 5:30pm)
• Must have C / C++

Job Responsibilities:

• Responsible for software prototyping, requirement analysis, design, development, test, system integration and site integration for developed applications
• Design, configuration, test, integration and maintenance of Automation & SCADA Systems and applications
• Provide technical, deployment and commissioning support to Project Teams and Customers
• Maintain and enhance software applications in both functionality
• Provide software support via on-site troubleshooting, testing and tuning of applications, software, network, protocols and communication issues

Requirements:

• Diploma/Degree in Electronics Engineering or Computer Science
• Experienced with two or more languages such as C/C++, C#, Python
• Experienced in at least one scripting language sch as Python, bash, ksh, bat, ps
• Experience in real tome/embedded system
• At least 2-3 years experience in C/C++ and at least 1 full SDLC
• Knowledge/Experience with SCADA protocols, RDBMS, REST, MQTT are desired

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Summary

Job Purpose

The Knowledge Engineer will be responsible for designing, constructing, and maintaining knowledge graphs derived from heterogeneous enterprise documents. The role involves leveraging Large Language Models (LLMs) for knowledge extraction, ontology-driven structuring, and question answering over knowledge graphs to support intelligent search, reasoning, and decision-making systems.

Key Responsibilities

• Leverage LLMs to extract structured knowledge (entities, relations, attributes) from unstructured and semi-structured documents such as:Maintenance manualsProduct design documentsTroubleshooting guidesLessons learned reports
• Process documents in multiple formats, including Word, PDF, PowerPoint, and Excel.
• Design, construct, and maintain knowledge graphs, including:Schema and ontology designEntity and relationship modellingData normalisation and validation
• Implement and manage knowledge graph storage using graph databases such as Neo4j and GraphDB.
• Develop LLM-powered question answering and interaction pipelines over knowledge graphs, enabling:Natural language queriesContext-aware and explainable responses grounded in structured knowledge
• Collaborate with domain experts and stakeholders to refine ontologies, extraction logic, and use cases.

Required Skills & Experience

• Strong understanding of ontology design, knowledge graph modeling, and semantic data representation.
• Proficiency in Python, with experience building data processing and NLP pipelines.
• Solid understanding of prompt engineering and LLM-based workflows.
• Hands-on experience working with LLMs, including both:Closed-source models (e.g., GPT-based APIs)Open-source models (e.g., LLaMA, Qwen, etc.)
• Experience with graph databases, particularly Neo4j and/or GraphDB.

Preferred / Advantageous Skills

• Experience in information extraction, document understanding, or NLP pipelines.
• Familiarity with RDF, OWL, SPARQL, or Cypher is a plus.
• Experience integrating LLMs with structured knowledge sources (e.g., KG-augmented QA, RAG with graphs).

Key Competencies & Attributes

• Strong analytical and problem-solving skills, with the ability to translate unstructured information into well-defined data models.
• Ability to work independently while collaborating effectively within a multidisciplinary team.
• Good communication skills to engage with technical and non-technical stakeholders.
• Demonstrated willingness to continuously learn and keep up with advances in LLMs, NLP, and knowledge engineering.

JOB SUMMARY

We are seeking a self-motivated person to support our Business Development (BD) team across South East Asia.

This role offers a strong development pathway within a consultancy-based environment, working closely with our BD and SEA leadership Team. You will be mentored by an experienced regional lead witha strong background in engineering, commercial management, and delivery ofcomplex projects across the region.

You will gain exposure to the full bid lifecycle, from early-stage opportunity tracking through to submission, helpingshape competitive, high-quality tenders.

JOB DUTIES &RESPONSIBILITIES

·      Support strategy, pipeline tracking, and opportunity management across SEA

·      Assisting preparation and coordination of tender submissions, ensuring high-quality and timely bid production

·      Contribute to bid planning and resource allocation

·      Provide contract administration support and assist with tender reviews

·      Review contract documentation and develop technical and commercial tender queries

·      Support cost estimation and commercial analysis for MEP works

·      Prepare and format bid documentation, reports, and presentations

·      Lead Variation and Extension of Time claim identifications and preparations, including submission and negotiation through to conclusion.

·      Maintain and analyse data using Excel and procurement / estimating tools

REQUIREMENTS ANDSKILLS

·      Degree or diploma in Quantity Surveying, Building Services, Engineering, or relatedfield advantageous but not essential

·      2–5years’ experience in MEP QS / Engineering (consultancy and / or sales-basedexperience preferred but not essential)

·      Exposure to tendering, procurement and commercial functions

·      Experience with various procurement and project management software systems

·      Strong proficiency in Excel and familiarity with estimating/procurement systems

·      Good understanding of mechanical and/or electrical systems and equipment

·      High attention to detail with strong documentation and presentation skills

·      Experience in contract review and tender query preparation is advantageous

·      Experience in a consultancy or professional services environment is preferred

·      Datacenter project experience is a plus

·      Fluent English communication skills (written and spoken)

JOB DESCRIPTION

To support the Maintenance-By-the-Hour (MBHTM) program in the function of repair management (RM). With the partnership and engagement of our vast network of vendors and Original Equipment Manufacturers (OEM), we ensure the repairs of our customer’s and MBHTM assets are achieved in a timely and cost-efficient manner to fulfill the demands of the MBHTM supply chain. To manage the large quantity of components concurrently undergoing repair within our network of vendors and OEMs. As every component undergo different repair procedures for defect rectification, it is important to understand the characteristics of the individual components and the purpose for each procedure carried out by the vendor/OEM to identify opportunities for cost reduction and evaluate the quality of the repair.

MINIMUM REQUIREMENT

Education & Experience

• Degree in Engineering (Aerospace/Electrical/Mechanical)
• Some knowledge in Maintenance, Repair and Operations (MRO) of aircraft components, airworthiness requirements and relevant Airbus and Boeing policies relating to aircraft component repairs would be good, but not compulsory.

Specific Skills (Knowledge, skills and abilities)

• Knowledge in Microsoft Office
• Strong analytical skills with methodical approach to identify requirements and opportunities in executing various Repair Management (RM) process
• Effective communication skill to communicate and negotiate with various parties to fulfill Key Performance Indicators (KPI)
• Abilities to prioritize workload and manage RM operations across multiple MBH contracts

Advanced Hardware & Emerging Technology

Our client is an innovative technology company developing next-generation communication and sensing solutions. Due to business expansion and ongoing R&D initiatives, they are looking for a passionate and hands-on Senior Electronics Engineer to join their growing engineering team in Singapore.

This opportunity is ideal for engineers who enjoy solving complex technical challenges, working on advanced hardware platforms, and contributing to cutting-edge product development in a highly collaborative environment.

Key Responsibilities

• Design, develop and test electronic hardware systems and subsystems
• Perform analog and digital circuit design, verification and troubleshooting
• Develop and optimize sensor interface and signal conditioning circuits
• Design and validate PCB layouts, including high-speed and mixed-signal designs
• Collaborate with multidisciplinary engineering teams throughout the product development lifecycle
• Conduct hardware integration, debugging, validation and performance testing
• Prepare technical documentation, test reports and engineering specifications
• Support continuous product improvement and technology development initiatives

Requirements

• Degree or Master's in Electrical Engineering, Electronics Engineering or related discipline
• At least 3 years of relevant electronics design experience
• Strong knowledge of analog and digital circuit design
• Experience with PCB design, testing and troubleshooting
• Familiarity with communication protocols such as SPI, I2C, USB, UART or CAN
• Hands-on experience with laboratory instruments and hardware validation activities
• Strong analytical and problem-solving skills
• Ability to work independently and within multidisciplinary project teams

Preferred Experience

Candidates with experience in any of the following areas will have an advantage:

• High-speed electronics
• Signal processing
• FPGA development
• Sensor technologies
• Optical or photonic systems
• Embedded systems
• Precision instrumentation
• Semiconductor or advanced technology industries
• R&D or product development environments

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

Responsibilities:

1. Develop design requirements for an NPU based on system-level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug any issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on experience in digital design is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.

Position Overview:

• As a design verification engineer, you will be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

• Experience in UVM verification methodology
• Disciplined, quality-minded, and highly driven for excellence,
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience, but are open to fresh graduates with outstanding results
• Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities
• Experience in video processing and video analytics is a plus
• Passionate and strong in general programming is a plus

Our client is in construction industry (Grade A1 Contractor), and they are currently seeking for M&E Engineer to be part of the team.

JOB DIMENSION (SCOPE)

• To verify the work done on site is in accordance with the approved drawings / specifications / authorities’ requirement, and to ensure that the subcontractor carry out rectification for non-compliance.
• To resolve site issues with consultants / subcontractor / supplier ASAP in order to minimize delay to the construction progress.
• To attend project / technical meeting and resolve site issues with owner/ consultants in order for the site progress to proceed smoothly.
• To cooperate with the safety department and carry out the assigned duties within the safety framework including permit to work.

REQUIREMENT

• Bachelor Degree in Mechanical/ Electrical Engineering
• More than 3years in M&E services & experience in main-contractor or sub-contractor M&E department

Onion Search Pte Ltd

EA License No: 24C2108

EA Personnel: Clover Lai Kah Wai

EA Personnel No: R24120119

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 3+ years of Digital Design and verification related experience
• Experience / knowledge in CMOS Image Sensor and Image Signal Processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Results oriented and adaptable to changes

• Basic $3,000 - $4,500 + AWS + VB + Transport Allowance

• Excellent Welfare and Benefits + Career progression

• Working location: Yishun

• Working days: Monday - Friday

• Working hours: 8.45am - 5.30pm
  

  
  

Job Responsibilities:

• Responsible in handling, coordination, design, execution, testing and documentation of project / system.
• Ensure all assigned projects / task run smoothly, including planning, controlling, execution and communicating with other departments.
• Manages engineering activities to ensure the technical content of project deliverables from detailed design through to commissioning is properly approved and delivered within budget and schedule.
• Coordinates with internal Sales team and other cross-functional team to clear all technical queries and Customer requirements.
• In-charge of the UV printer in preparation and producing product / system nameplate.
• Manage and monitor project and production stock items.
• Perform creation of Part Number in SAP & “Issue for Production” for project.
• Conduct project closing in SAP after project completion (item returning in SAP (RFP) and updating of SAP Bill of Materials).
• Physical issuance of project components during the kick-start of assembly job.
• Provides engineering input into project decisions and resolution of technical queries.
• Initiate / support on the process improvement activities of the department.
• Other duties as assigned

Requirements:

• Minimum a Diploma in Mechanical Engineering or any Engineering / Technical Field.
• Training will be provided for those without / with lesser experience.
• Familiarity with hydraulics is an advantage.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities

• Current and Expected salary

• Reason for leaving

• Date of availability

• Education background
  

We regret that only shortlisted candidates will be contacted

NG JYA YEE (R23119014)

EA Recruitment Pte Ltd

EA License No: 21C0492

We are seeking a skilled Software Engineer with strong experience in Java-based application development. The ideal candidate should have hands-on expertise in Spring Boot and cloud technologies, with the ability to deliver high-quality, scalable solutions in a dynamic environment.
Key Responsibilities

• Design, develop, and maintain scalable backend applications using Java and Spring Boot
• Collaborate with cross-functional teams to define, design, and deliver new features
• Deploy and manage applications on cloud platforms (AI Cloud /relevant cloud environments)
• Troubleshoot, debug, and optimize application performance
• Ensure best practices in coding standards, testing, and deployment
• Participate in code reviews and contribute to continuous improvement

Required Skills & Experience

• Overall IT Experience:  Atleast 8 yrs
• Java: 2–5 years of hands-on experience
• Spring Boot: 2–5 years of experience in building microservices
• AI Cloud / Cloud Technologies: 2–5 years of relevant experience
• Bilingual Communication Skills: Ability to communicate effectively in two languages
• Strong understanding of RESTful APIs and microservices architecture
• Familiarity with version control systems (e.g., Git)

Preferred Profile

• Experience working in onsite project environments
• Good problem-solving and analytical skills
• Strong communication and collaboration abilities

Responsibilities:

• Develop new applications and enhance existing systems using .NET, C#, and Angular
• Analyze and interpret requirements from Business Analysts and Consultants
• Design and implement solutions based on functional and technical specifications
• Collaborate with the development team while adhering to coding standards and best practices
• Provide on-site support as needed and travel overseas
  

Qualifications:

• Min 2–3 years of relevant working experience
• Proficient in frontend technologies (Angular, PrimeNG, HTML, CSS, JavaScript, JSON, Bootstrap) with experience in responsive design
• Basic to intermediate backend knowledge (.NET, C#, Web API, SQL Stored Procedures, SSRS)
• Solid understanding of Object-Oriented Programming (OOP) principles
• Familiarity with Git version control is an added advantage
• Able to work under tight deadlines with a strong sense of ownership

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd
EA License No: 20C0270
EA Personnel: Nyon Hock Sen (Aden)
EA Personnel Reg No: R24124070

Software QA Executive

Responsibilities

• Develop, execute, and maintain software test plans, test cases, and test reports.

• Perform functional, integration, regression, and user acceptance testing (UAT) for software and IoT solutions.

• Identify, document, and track software defects, and work closely with developers to resolve issues.

• Verify software functionality, performance, and quality before deployment.

• Assist in product validation, quality assurance, and documentation activities.

• Prepare testing records, reports, and quality-related documentation.

• Support software release and quality control processes.

• Coordinate with internal teams to ensure project requirements and quality standards are met.

• Assist with project coordination, scheduling, and follow-up activities.

• Support daily business operations, administrative tasks, and documentation management when required.

• Assist in preparing reports, presentations, quotations, and customer-related documentation.

• Perform other duties assigned by management from time to time.

Requirements

• Diploma or Degree in Computer Science, Software Engineering, Information Technology, or a related field.

• Knowledge of software testing methodologies and QA processes.

• Familiarity with bug tracking and test management tools is an advantage.

• Strong analytical and problem-solving skills.

• Good communication and documentation skills.

• Able to work independently and as part of a team.

Develop and deliver scalable ETL/ELT solutions across Teradata and Hadoop platforms by building robust data pipelines, ingestion frameworks, and automation capabilities. Ensure efficient data processing, performance optimization, and reliable integration of enterprise data sources, while supporting data warehouse, CDC, and MDM initiatives.

Responsibilities

• Create EDW ETL/ELT codes using Teradata SQL, Informatica, Apache Spark, QueryGrid, Trino to perform various transformations and load into Teradata based data warehouse or datamarts
• Performance tuning of highly complex applications to reduce resource usage
• Create framework using GCFR, shell scripts, BTEQ and shell scripts to automate end to end. Also to integrate with control
• Build in-house CDC framework using Java to process OLR logs from SAP(Oracle) and ingestion the data into Teradata. Create framework around this CDC ingestion to make it configurable
• Install and build Master Data Management (MDM) application for various user uploads along with data validations and approval workflow.

Qualifications

• Bachelor’s or Master’s degree in Computer Science, Engineering, Information Technology, or a related field.
• Minimum of 7+ years of professional experience
• Strong hands‑on experience with the ETL(Informatica Power Center) and Teradata based ETL development, similarly Hadoop ecosystem (Hive, Impala, Spark, Kafka, Iceberg, Ranger, Atlas, Nifi, Flink etc.,), and data pipeline orchestration.
• Create EDW ETL/ELT codes using Teradata SQL, Informatica, apache Spark, QueryGrid, Trino to perform various transformation and load into Teradata based data warehouse or datamarts
• Performance tuning of highly complex applications to reduce resource usage
• Create framework using GCFR, shell scripts, BTEQ and shell scripts to automate end to end. Also to integrate with control
• Build in-house CDC framework using Java to process OLR logs from SAP(Oracle) and ingestion the data into Teradata. Create framework around this CDC ingestion to make it configurable

Install and build Master Data Management(MDM) application for various user uploads along with data validations and approval workflow.

Key Skills:


• ETL/ELT Development using Informatica Power Center and Teradata
• Data Platform Expertise
• Data Pipeline & Orchestration using enterprise scheduling tools
• Performance Optimization
• Data Integration & CDC
• MDM – Reference data management
• ETL Framework & Automation Development

Responsibilities

• Lead the design and development of interactive 3D visualization interfaces using Unity 3D, including real-time digital twin dashboards and OT operational views.

• Architect and implement geospatial rendering systems - integrating map layers, coordinate systems and spatial data into Unity-based frontends.

• Design and deliver seamless integration between Unity frontend components and backend systems, middleware, IoT/OT data pipelines, and REST/WebSocket APIs.

• Collaborate with IoT, OT, and robotics engineering teams to translate telemetry, sensor, and asset data into real-time 3D visualisation.

• Drive technical decisions around rendering performance, level-of-detail (LOD) strategies, shader optimisation, and scene management for large-scale operational environments.

• Build and maintain reusable UI component libraries within Unity, aligned to UX guidelines and design system standards.

• Define and enforce frontend engineering standards, coding conventions, and review practices

• Engage with product owners, systems architects, and client stakeholders to ensure frontend solutions meet functional and non-functional requirements.

• Contribute to CI/CD pipeline integration for build artefacts, automated testing, and deployment workflows.

Requirements

• Bachelor's degree or higher in Computer Science, Software Engineering, Geospatial Science, or equivalent discipline.

• Minimum 5 years of software engineering experience, with at least 3 years focused on Unity 3D development in a production environment.

• Demonstrated delivery of Digital Twin or 3D visualisation solutions for operational, industrial, or smart city domains.

• Understanding of IOT integrations such as OPC-UA, Modbus, MQTT, - Middleware integration and BMS integration

• Understanding of Command and Control (C3) systems.

• Hands-on experience integrating real-time IoT/OT sensor data into interactive 3D or geospatial frontends.

• Track record as a subject matter expert - driving architecture decisions, conducting code reviews, and managing delivery risk.

• Strong understanding of systems engineering principles; able to design frontend components with awareness of full-stack integration constraints.

Licence no: 12C6060

Requirement:
3–7 years of relevant experience in infrastructure or platform operations.
Strong problem-solving and analytical skills with the ability to work independently.
Experience in enterprise infrastructure environments.
Familiarity with vendor and contract management.
Strong communication skills to engage both technical and non-technical stakeholders.
Strong teamwork, organizational, and interpersonal skills.

Technical Requirements:

1. Experience with virtualisation platforms (e.g., VMware vSphere, Hyper-V, Nutanix).
2. Experience with storage systems (SAN, NAS) and enterprise backup solutions (e.g.,Commvault, Veeam, Cohesity).
3. Proficiency in Red Hat Linux and/or Windows Server administration.
4. Familiarity with monitoring and observability platforms.
5. Solid understanding of networking concepts, including TCP/IP, DNS, DHCP, routing and switching, firewalls, load balancing, and network segmentation.
6. Understanding of data centre network fundamentals.
7. Experience with high-availability and disaster recovery solutions.
8. Experience supporting infrastructure modernization and migration initiatives.
9. Strong documentation skills.
10. Familiarity with cloud platforms (e.g., AWS, Azure) and hybrid infrastructure concepts.

1. Maintain and support critical infrastructure platforms, including compute, storage, virtualization, and supporting systems across development, staging, and production environments.
2. Implement platform standards, automation, and modern operational practices to improve efficiency and reliability.
3. Support infrastructure enhancement and modernisation initiatives in alignment with enterprise architecture standards.
4. Manage virtualisation platforms (e.g., VMware, Hyper-V, Nutanix), including capacity monitoring, performance optimisation, and lifecycle management.
5. Execute patching and upgrade strategies using automation while minimising service disruption.
6. Provide L2/L3 technical support, including incident management, root cause analysis, and problem resolution.
7. Maintain backup, disaster recovery (DR), and high-availability (HA) solutions.
8. Implement and enforce security controls, including access management, system hardening, and compliance monitoring.
9. Collaborate with application, network, and vendor teams to ensure platform stability, scalability, and service performance.
10. Develop and maintain documentation, runbooks, and standard operating procedures (SOPs).
11. Support and troubleshoot infrastructure and network-related issues to ensure end-to-end service availability.
12. Support cloud migration and hybrid infrastructure initiatives, including workload assessment, migration planning, and post-migration operational support.

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solar's Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for REC's strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, India's largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

We are looking for a Ingot & Wafer (IW) cum Contract Manufacturing Engineer with good ethics and strong passion to take on proactive roles of qualifying and managing external suppliers to achieve company's strategic directions and key yearly goals for ingot and wafer factory. This position requires good analytical and interpersonal skills to work with external suppliers to achieve continuous improvements in IW cost, yield and cell efficiency by implementing best known methods. Selected candidates will work closely with the Process/Integration/QA and Planning team to define all the necessary process and Quality Control procedures to meet product functional and reliability requirements. Frequent travelling to India HQ and ability/willingness to travel at short notices will be a pre-requisite in view of the job nature and requirement.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Safety

• Engineer must adhere to all the HSE principles and WI during the work.

Quality

• Remember all WI, SOP, and Quality Policy. Work with related internal departments (such as Production, Equipment, Quality, Technology) and external suppliers to resolve wafer/cells/modules quality issues and implement required decisions made by internal management at the external supplier sites.
• Ensure no quality issues during qualification/certification and proper change management implementation phase.

Delivery

• Possess excellent project management skills by establishing schedules, coordinating with required resources both within the organization or external suppliers, projecting cost of qualifications/certification projects and risks identification to implement and execute the required projects.
• Responsible to generate bill of materials (BOMs) and Design/Engineering change, product transfer to internal/external lines and lead in DFMEA/PFMEA for product change.
• Ability to create and maintain excellent internal/external customer supplier relationship through excellent interpersonal and communication skills.
• The Key Performance indicators are the results and prompt project schedule control.

Cost

• Initiate and lead cost-reduction projects relating to cost reduction.
• These types of projects will relate to man, method, machine, and materials.
• In cases where projects are not initiated, participation towards such project will also be required.
• Assessment on external suppliers for IW and external wafer as potential cost driver as alternative/new material as well as supply risk mitigation.

Continuous Improvement

• Initiate and lead projects relating to IW cost reduction, IW production yield, cell efficiency and module power improvement activities.
• To run and execute projects base on RPDM process flow.
• Engineer will have the chance to research on new processes and materials at the suppliers' site to be implemented into our internal production environment.

Others

• Perform other duties as assigned. Duties will vary according to the degree of difficulties and involvement of the specific targets set in the department.
• Develop and maintain proper job methods, work instructions and change management.
• Regular reporting of project status.
• Lead trouble-shooting and root cause analysis efforts to resolve issues.

ESSENTIAL JOB COMPETENCIES:

Technical

• Strong technical knowledge in solar ingot growth, wafer manufacturing, and wafer-related process development.
• Familiarity with new material evaluation, qualification, and R&D activities for photovoltaic applications.
• Good understanding of process parameters, material behavior, product performance, and manufacturing requirements across upstream and downstream operations.
• Able to work in a fast-paced environment with good adaptability and professional judgment.
• Proficient in engineering data analysis, statistical interpretation, and technical assessment to support development and process improvement.
• Proficiency in English Language and at least one other language(s) is necessary to liaise with various stakeholders incl. vendors/suppliers.

Analytical & Problem Solving

• Strong analytical capability to identify technical gaps, interpret data trends, and solve process or material related issues effectively.
• Able to perform root cause analysis, evaluate risk, and develop practical corrective and preventive actions.
• Capable of translating complex engineering data into clear conclusions and actionable recommendations.

Soft Skills & Professional Attributes

• Good communication and collaboration skills to work effectively with cross-functional teams, suppliers, and stakeholders.
• Proactive, detail-oriented, and results-driven, with a strong sense of ownership and accountability.
• Able to work in a fast-paced environment with good adaptability and professional judgment.

Leadership

• Able to provide technical guidance and influence decision-making in material development, qualification, and process improvement activities.
• Demonstrates initiative in driving problem resolution, cross-functional alignment, and continuous improvement.
• Capable of supporting team development through knowledge sharing and technical mentoring.

Project Management

• Experience in managing technical projects related to material qualification, process development, plant ramp-up, or cost reduction initiatives.
• Able to coordinate timelines, resources, deliverables, and stakeholder communication to ensure effective project execution.
• Strong ability to prioritize tasks, track progress, and deliver outcomes within schedule and business objectives.

ADDITIONAL RESPONSIBILITIES:

• Perform other duties as assigned. Duties will vary according to the degree of difficulties and involvement of the specific targets set in the department.
• Develop and maintain proper job methods, work instructions and change management.
• Regular reporting of project status.
• Lead troubleshooting and root cause analysis efforts to resolve issues.

Technical / Professional:

• Degree in Electrical/Electronics/Mechanical/ Materials Engineering.

Technological:

• Working experience in Solar/Semiconductors/Electronics manufacturing industries will be an advantage.
• Knowledge in Semiconductor/Ingot & Wafer, Solar cell and module processes
• Knowledge in FMEA, DFMEA, DOE, Fish-Bone Analysis
• Strong technical analysis competency with the use of analytical tools like JMP, Mini-Tab for troubleshooting and data mining.

General:

• Suitable to work in cleanroom, outdoor testing, and wafer slicing/manufacturing environments.
• Able to adapt to different working conditions and support hands-on technical activities. Able to carry cell/wafer for testing. (
• Familiar with safety, discipline, and operational requirements in both lab and production settings.
• Ability to work under stress in a fast-paced environment with self-motivation.

People/Relations:

• Dynamic & committed with proactive working attitude.
• Ability to initiate without being asked.
• Challenging spirit to improve current conditions.
• Highly effective personal skills - communication and organization.
• Good Team player.

People Management:

• Able to work effectively with cross-functional teams across R&D, engineering, production, and quality.
• Capable of guiding team members, coordinating tasks, and supporting timely issue resolution.
• Demonstrates good communication, teamwork, and accountability.

Project Management:

• Able to manage technical projects related to material evaluation, process development, and cost improvement.
• Capable of coordinating timeline, resources, and deliverables to ensure smooth execution.
• Able to identify risks, track progress, and drive project completion.

Additional Advantageous Skills:

• Ability to perform software simulations using SPICE or MATLAB.
• Electrical characterization and physical characterization/ Failure Analysis tools for systematic troubleshooting and improvement.
• Characterization tools/technique competency preferred include: IQE tester, Spectrophotometer, Ellipsometer, Semilab WT-2000, Sinton WCT-1200, Corescan, Photoluminescence Technique and Electroluminescence Technique.

• 5 Work Days Per Week
• Current Office Near to Kaki Bukit MRT
• Will Relocate to Tai Seng MRT in August 2026
• Medical & Dental Benefits Provided
• Entitled to Yearly Bonus & Performance Bonus

Responsibilities ( Lead & Head of Site Reliability Engineer | SRE Manager )

High Availability and Stability Maintenance of Application Systems:

• Includes daily monitoring, alert response, emergency handling, on-call duties, regular system health checks, and performance optimization.

Compliance and Secure Access Construction for Application Systems:

• Ensure operational design, processes, and data management comply with relevant privacy and data protection laws.
• Ensure compliance with full auditing and regulatory checks and provide auditing materials as required.

Change and Release Management:

• Best practices for application system changes, including change control, version management, and rollback strategies, while ensuring operational duties during release windows.

Automation and Infrastructure Optimization:

• Drive operational automation by designing and implementing automated tools and processes, ensuring resource allocation is optimized and supporting business scalability.

Other Operational Practices and Work Arrangements:

• Providefeedback and suggestions for business architecture design and continuously produce operational technical documentation.

Qualifications

1. Bachelor’s Degree or above; a degree in computer science or a related field is preferred.
2. At least 5 years of experience in cloud services products and application operations and minimum 1 year of managerial experience.
3. Familiar with cloud platform deployment and management (AWS, Azure, Google Cloud, etc.).
4. Experience with automation operations and container technologies (Docker, Kubernetes).
5. Familiarity with CI / CD processes and tools (e.g Jenkins, GitLab CI).

Reolink, a leader in intelligent visual technology for homes and businesses, was founded in 2009 by a group of engineers with a strong commitment to and passion for smarter security solutions.

Our Products are now trusted by millions of users across more than 110 countries and regions worldwide. Building on this trust, we continue expanding our presence and bringing our innovations to more markets around the globe.

Reolink remains committed to delivering advanced, reliable, and user‑centric solutions that empower people to protect what matters most.