Total 13,384 job vacancies in Singapore

Job Scope:

• Carryout preventive and corrective maintenance of ACMV systems, including air-conditioning units, FCUs, AHUs, CRAC, ventilation systems, exhaust systems, and associated equipment.
• Perform installation, replacement, upgrading, and commissioning of ACMV equipment and systems.
• Conduct troubleshooting and fault diagnosis of ACMV systems and implement effective corrective actions.
• Inspect equipment regularly to identify defects, deterioration, and operational issues.
• Assess system performance and recommend necessary repairs, replacements, orimprovement works to enhance reliability and efficiency.
• Ensure all ACMV systems operate in compliance with applicable safety regulations, codes of practice, and company standards.
• Prepare maintenance reports, service records, inspection checklists, and other technical documentation related to work performed.
• Coordinate and schedule maintenance, repair, and installation activities to ensure the timely completion of work.
• Liaise with clients, subcontractors, suppliers, and relevant stakeholders regarding maintenance and project requirements.
• Assist in the sourcing, evaluation, procurement, and inventory management of spare parts, tools, materials, and ACMV equipment.
• Monitor stock levels and recommend replenishment of critical spare parts and consumables.
• Participate in tender site visits and site surveys to assess project requirements and provide technical input for tender submissions.
• Support the preparation of quotations, technical proposals, and maintenance plans where required.
• Supervise, mentor, and provide technical training and guidance to junior technicians and apprentices.
• Ensure proper implementation of safe work procedures, risk assessments, and permit-to-work requirements.
• Attend emergency breakdowns and provide after-hours support when required.
• Maintain good housekeeping of work areas, tools, and equipment.
• Perform any other ACMV-related duties as assigned by the superior.

Job Requirements:

• At least 5 experience in ACMV installation, maintenance and repair.
• Education: ITE/ Diploma or equivalent in ACMV/ Electrical or related discipline.

Responsibilities:

• Conduct QAQC daily checks
• Prepare monthly QAQC report for submission to Corporate QAQC Department
• Conducting monthly QAQC Training to Sub-contractors
• Issuance of QAQC Non-compliance to sub-contractors
• Attend monthly QAQC presentation and meeting at Corporate QAQC Department

Job Requirements:

• Min 5 years experience
• Min Diploma in Engineering fields
• Architectural-trained or Structural-trained work experience

About Us

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok, Lemon8, CapCut and Pico as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.​

Why Join ByteDance

Inspiring creativity is at the core of ByteDance's mission. Our innovative products are built to help people authentically express themselves, discover and connect – and our global, diverse teams make that possible. Together, we create value for our communities, inspire creativity and enrich life - a mission we work towards every day.​

As ByteDancers, we strive to do great things with great people. We lead with curiosity, humility, and a desire to make impact in a rapidly growing tech company. By constantly iterating and fostering an "Always Day 1" mindset, we achieve meaningful breakthroughs for ourselves, our Company, and our users. When we create and grow together, the possibilities are limitless. Join us.​

Diversity & Inclusion​

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.​

Job highlights

Positive team atmosphere, Career growth opportunity, Paid leave, Flat organization, Competitive compensation

Responsibilities

About Us

Embedded in client environments, this role leads Forward Deployed Engineers (FDEs) to rapidly develop and debug AI applications to accomplish production-grade deployment, while driving product feature iteration.

Responsibilities

-Develop a deep understanding of customers’ business scenarios, rapidly build AI application prototypes for validation, and continuously iterate them into production-grade Agent systems.

-Design AI- and cloud-based architectures, and leverage AI-assisted development to rapidly implement solutions within customer environments, effectively integrating with customers’ application APIs and data systems while complying with their security requirements.

-Build high-performance evaluation pipelines and observability frameworks to ensure Agent systems meet requirements for accuracy, safety, and latency.

-Identify reusable application patterns and technical challenges, translate them into product feature requests, and help drive product evolution and improvement.

-Work closely with customers’ engineering teams to ensure successful deployment of AI applications, achieving long-term stability, high adoption rates, and sustained business value.

Qualifications

Minimum Qualification

- Bachelor's degree or above in Computer Science, Engineering, Mathematics, or a related field, or equivalent hands-on experience.

- More than 3 years of software development experience, with strong proficiency in Vibe Coding and substantial practical application of it in real-world projects.

- Hands-on experience building AI applications, including areas such as Prompt Engineering, Fine-Tuning, Retrieval-Augmented Generation (RAG), and Agent development.

- Experience in cloud-based architecture design and development, including developing with cloud service APIs/SDKs, automated deployment, and designing highly available and scalable systems.

Preferred Qualification

- Experience developing complex Agent systems, with proficiency in using open-source or commercial Agent development frameworks such as LangGraph, CrewAI, or Agent development SDKs provided by cloud service providers.

- Experience delivering AI solutions for one or more industries, including but not limited to education, healthcare, automotive, financial services, telecommunications, and other sectors.

Job Description

• Lead, manage, and monitor the day-to-day execution of engineering projects to ensure milestones and technical specifications are met.
• Develop detailed project execution plans, track timelines, manage project budgets, and implement cost-control measures.
• Review engineering designs, drawings, and technical documentation for accuracy, feasibility, and compliance with quality standards.
• Serve as the primary point of contact for clients, vendors, authorities, and internal teams to facilitate smooth project communication and issue resolution.
• Identify potential project risks, engineering bottlenecks, or safety hazards, and proactively implement mitigation strategies.
• Ensure all engineering activities adhere to local regulatory standards, building codes, and Workplace Safety and Health (WSH) regulations.
• Mentor and guide junior engineers and technical staff, fostering a collaborative and high-performing team environment.

Job Requirements

• Bachelor’s Degree in Engineering (Civil, Mechanical, Electrical, or a related discipline).
• Minimum of 5–8 years of proven experience in project engineering, with at least 2 years in a senior or supervisory capacity.
• Strong track record of successfully delivering complex engineering projects from inception to handover.
• Deep understanding of local engineering standards, building codes, and workplace safety regulations.

Job Description & Requirements

Job Description & Requirements

Do you want to further develop your analytical mind to pinpoint core issue and earn the satisfaction of resolving it ? Do you like working with fellow team members to improve your job routine and environment ? Do you crave job security and yet be at the frontier of technology?

Join us at UMC (SG), a leading global semiconductor foundry company manufacturing microchips for use in the present and for the future. In course of your work, you will learn internationally acclaimed analytical skills and techniques to apply in your work and personal life. Have the chance to work with engineers from other fields and process to resolve and improve current procedures.Seize the opportunity to take part at senior level in Quality improvement competition host in Taiwan national level and earn accolades as an elite engineer with awards and certification. Be recognized as an engineer of high calibre in Singapore and internationally.

Responsibilities

1. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality and lot handling
2. Maintain Equipment capability for production and meet production demand
3. Engage with Production line and Process Engineers to balance tool availability for production, troubleshooting and scheduled maintenance
4. Engage in Equipment troubleshooting and production quality improvement.
5. Evaluation of new equipment/materials and retrofits of Equipment for better efficiency / production quality

Qualifications

1. Possess at least a Bachelor's Degree in engineering in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering ,Physics, Automation, Aerospace Engineering
2. Able to think critically with strong analytical skills
3. Possess good communication skills and time management skills
4. Prior leadership or competition experience in school activities will be an advantage
5. Must be willing to commit shift work
6. At least 2 years with relevant working experience in semiconductor industry foundry

DevOps Engineer

Who we are

Comprising a team of experts, we focus on enhancing the bank's capabilities in supporting key areas such as Risk, Wealth, Retail, etc., with a strong emphasis on coordination in data management, technology, and internal stakeholder collaboration.

Upholding to Client’s core value of being enterprising, we are incredibly thrilled about strengthening this strategic unit’s capabilities for the bank, envisioning significant progress and innovation. We firmly believe that advanced analytics is a pivotal factor in delivering premier AI services to our stakeholders.

Your Profile

We seek individuals with highly developed conceptual, strategic, and analytical skills, capable of striking a balance between visionary thinking and practical solutions. The ability to comprehend, inspire, and mobilize others is crucial. A business-oriented mindset coupled with effective storytelling will drive your success. We are looking for self-starters ready to take on responsibilities with enthusiasm.

Roles & Responsibilities

• Developing and maintaining the entire DevOps pipelines.
• Coordinate with the stakeholders from requirements gathering until successful implementation DevOps pipeline on boarding.
• Support developers in preparation of JIRA deployment tickets as part of change management
• Work with the vendors and for internal platforms to setup centralized DevOps solutions considering market best practice, Industry standard and ease of support.
• Work with the vendors and for internal platforms to upgrade the DevOps tools farm and integrating with tools.
• Lead analysis and resolution of root cause for Test Orchestration / Environment related issues
• Ability to multitask and work in a fast-paced, collaborative team environment.
• Excellent written and oral communication skills; writing, publishing and conference-level presentation skills
• Stays current with industry trends and leads development of key DevOps, Runtime, and Operational innovation platforms.

TechnicalSkills required:

• Deep technical background, with hands-on experience in supporting CI/CD pipelines (Bitbucket, Jenkins, Artifactory, Sonar, Veracode for SAST, JIRA and Confluence).
• Hands on experience building CI/CD pipelines orchestration by Jenkins, GitLab CI, GitHub Actions or similar tools is a must-have.
• Must have experience in containerizing applications and have hands-on with building pods / containers in Kubernetes
• Good Experience on OpenShift or AWS
• Prior technical background on different build and branching strategies.
• Deep technical background on Kubernetes deployment process.
• Good knowledge on maintaining/deploying secrets in Kubernetes.
• Prior working experience in setting up Jira workflow.
• Strong hands-on experience on Shell or Groovy scripting.
• Prior experience is customizing JIRA and Setting up confluence spaces.
• Prior hand-on experience in setting up CI/CD pipeline as a centralized solution.
• Hand on experience in setting up DevOps governance, Security standards and audit requirements.
• Prior experience in setting up DevOps pipeline in internal and external cloud offerings.
• Experience with continuous testing, techniques and tools (Junit, Sonar Cube, Veracode etc.)
• Technical exposure of automation accomplished with advanced Python, Chef, Ruby and PowerShell
• Experience in managing hybrid cloud/on-prem environments.
• Familiarity with observability platforms and incident response workflows.
• Working knowledge of AI / Machine Learning applications will be an advantage.

Soft Skills

• Good knowledge of Agile process and principles
• Strong in Software Engineering fundamentals
• Excellent communication skills
• Attention to detail
• Analytical mind and problem-solving aptitude
• Strong Organizational skills
• Visual Thinking
• Team management skills

What you need to do now

If you’re interested in this role, click ‘apply now’ to forward an up-to-date copy of your CV, or call Shabnam at Hays on +65 60271964 or email Shabnam.Bahar@hays.com.sg for a confidential discussion. Referrals are welcome.

Registration ID No. R1873584 | EA License number: 07C3924 | Company Registration No. 200609504D

• Position: Civil & Structural Engineer

• Location: Bugis

• Working hours: Monday to Friday (9am - 6pm)

• Salary (commensurate with experience): Up to $6,000 + Performance Bonus + Staff Benefits

• Duration: Permanent

• Industry: Structural Engineer

Main Responsibilities:

• Undertake civil and structural design development, detailed design calculations and drawings

• Prepare and review structural drawings, technical reports, specifications and project documentation

• Attend site meetings and coordinate with clients, consultants, contractors and authorities

• Plan, coordinate, manage and monitor C&S project progress to ensure timely delivery

• Ensure designs comply with Eurocode, Singapore Standards, BCA requirements and latest code of practice

Requirements:

• Possess Degree in Civil Engineering, Structural Engineering or related discipline

• Minimum 5 years of relevant C&S design/project experience, preferably in consultancy or construction

• Familiar with Eurocode, Singapore Standards, BCA requirements and local authority procedures

Email to: abby.pang@searchpersonnel.com.sg for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Description :

- Responsible for all the execution of contracts progress

- To assist in mechanical / Electrical system design

- Installation progress as well as co-ordination with Clients, Consultants, main contractor, Subcontractors & authorities to ensure efficient and timely delivery assignment

- Report & monitor of progress of project to Project manager / Assistant Project Manager / Senior Engineer

- To co-ordinate meetings & daily briefing at site

- To guide & supervise Assistant Engineers / Supervisors

- To check all installation drawings & prepare relevant schedule

- To prepare cost estimation ,budget & control & to check sub-contractor’s progress claim

- To monitor & supervise work progression, Quality Control & ensure that safety regulation is observed

- To perform testing and commissioning at work site

- Maintain proper record in all M&E Issue

Requirements :

Diploma or Degree in Mechanical /Electrical

Min. 2 years’ experience in Mechanical / Electrical system design

Good site management &@ supervision skills

Good interpersonal skills

Strong Knowledge of M&E details, working drawings and local construction practices

Knowledge in Microsoft & autocad

About Us

At HDR, we specialise in engineering, architecture, environmental and construction services. Our global team of over 15,000 employees is led by the strength of our values and a culture shaped by employee ownership. We network with each other, build on each other's contributions, and collaborate to make great things possible. When you join HDR, we help you take charge of your career, giving you multiple growth opportunities along the way.

The Role

HDR is looking for a Senior Electrical Engineer to join our Singapore Building Engineering Services (BES) team. This position will be working on projects across a range of markets, primarily the Mission Critical sector.

The principal activities of the role will be:

• Delivering building services design packages from concept through to construction  
• Undertaking detailed engineering calculations, design development and system selection  
• Producing coordinated, compliant drawings, reports and specifications  
• Ensuring designs meet Singapore codes, standards and regulatory requirements  
• Coordinating discipline inputs and resolving design interfaces  
• Supporting construction-phase activities including inspections and technical queries  
• Contributing to technical improvement initiatives and best practice  

Qualifications & Experience

• Bachelor’s Degree in Electrical Engineering
• Typically, 6-12 years' relevant experience
• Familiar with local code and authority submission procedure
• Good working knowledge of relevant legislation, regulations, codes of practice, and guidelines
• Commitment to continuous professional development, both for own development as well as that of team members
• Mission Critical Design / Data Centre Design Experience is an added advantage
• Design experience with BIM is an added advantage
• Knowledge consulting experience and successful project management experience in the MEP sector is an added advantage
• Appreciates teamwork and good interpersonal skills
• Singaporean or PR

Benefits and Culture

• Global organization with opportunities for international travel and collaboration
• Award-winning sustainable projects
• HDR University learning platform with access to webinars, LinkedIn Learning, and the Pinnacle Series
• Rewards program including referrals, long service awards, and certification bonuses
• Company paid Annual Professional Membership Fees
• Employee Assistance Program
• A culture that supports and encourages inclusion and diversity where each of us are welcomed, valued, respected, and empowered to bring our authentic selves to work every day

Why HDR

At HDR, we know work isn't only about who you work for; it's also about what you do and how you do it. Led by the strength of our values and a culture shaped by employee ownership, we network with each other, build on each other's contributions, and collaborate to make great things possible.  When you join HDR, we help you take charge of your career, giving you multiple growth opportunities along the way. 

Watch Our Story:' https://www.hdrinc.com/our-story'

We believe that the way we work can add meaning and value to the world. That ideas inspire positive change. That colouring outside the lines can illuminate fresh perspectives. And that small details yield important realisations. Above all, we believe that collaboration is the best way forward.

Job Summary

The Lead Loss Prevention Engineer is responsible for leading and managing all technical safety and loss prevention engineering activities for offshore Oil & Gas projects. The role ensures compliance with international standards, company specifications, and regulatory requirements to minimize operational risks, safeguard personnel, assets, and the environment throughout project execution.

Key Responsibilities

• Lead and oversee all Loss Prevention and Technical Safety engineering activities during FEED, EPC, EPCIC, and detailed engineering phases
• Prepare and review safety deliverables including Firewater Demand Calculation, Firewater P&IDs, Fire & Gas Mapping, ESD Philosophy, Hazardous Area Classification, Safety Plan, Fire Control Plan
• Coordinate with multidisciplinary teams to ensure safety requirements are properly integrated into engineering designs
• Interface with clients, classification societies, regulatory authorities, and third-party consultants on technical safety matters
• Provide technical guidance and mentorship to junior engineers and support project execution schedules and deliverables
• Participate in design reviews, safety assessment workshops and constructability reviews etc
• Ensure compliance with international codes and standards such as API, NFPA, IEC, ISO, and local regulatory requirements
• Support commissioning, startup, and operational safety reviews when required

Required Skills, Experience & Qualifications

• Bachelor’s Degree in Chemical Engineering, Safety Engineering, Mechanical Engineering, or related discipline
• Minimum 15 years of experience in Loss Prevention / Technical Safety Engineering within Oil & Gas, FPSO, Offshore industries
• Strong experience in FEED and EPC/EPCIC project execution
• Hands-on experience in developing and reviewing safety design documents such as for firefighting system, lifesaving appliances, HAC, etc. is a must
• Hands-on experience conducting HAZID, HAZOP, SIL, QRA, FERA, EERA and formal safety studies is an advantage
• Familiarity with offshore safety regulations and international engineering standards
• Strong stakeholder management and communication skills
• Ability to lead engineering teams and manage multiple project interfaces

Job scopes

• Maintain and evolve the existing Chatbook application, ensuring stability, performance, and continuity of service.
• Design and build new AI solutions leveraging LLMs, retrieval-augmented generation (RAG), and agentic frameworks.
• Collaborate with Project Managers, Solution Architects, and business stakeholders to deliver production-grade AI applications on AWS.
• Take over the Chatbook Application through structured knowledge transfer, documenting existing architecture, codebase, and integrations.
• Perform ongoing system maintenance including updates, bug fixes, performance tuning, and incident resolution.
• Design and develop end-to-end AI solutions using LLMs, RAG architectures, and agentic frameworks.
• Build MCP-based integrations and agentic pipelines for enterprise system connectivity.
• Implement monitoring and observability for AI model performance and agentic behaviour.
• Translate business and stakeholder requirements into robust, AI-powered solutions.

Job Requirements

• Bachelor’s degree in Computer Science or a related discipline
• Working experience building AI agents and multi-agent systems using frameworks such as LangChain, LlamaIndex, LangGraph, AutoGen, or CrewAI, with good knowledge of agentic design patterns (planning, tool use, memory, reflection).
• Experience with MCP-based integrations and maintaining GenAI/agentic applications in production, including guardrail implementation and application evaluation.
• Knowledge of LLMOps practices — prompt management, model evaluation, observability tools (e.g., LangSmith), AI governance, and responsible AI principles.
• Good fundamentals in clean code, design patterns, testing, REST API development, containerisation, orchestration, and CI/CD pipelines.
• Proficiency in Next.js / React, Python, TypeScript, and Tailwind CSS.
• Proficiency in relational and NoSQL databases, with familiarity in vector databases for semantic search.
• Experience with AWS cloud services including Lambda, API Gateway, S3, CloudWatch, and IAM.
• Hands-on experience with AWS Bedrock to orchestrate foundation models such as Anthropic Claude, including Knowledge Bases, Agents, and Guardrails.
• Experience developing and deploying applications on Government Commercial Cloud

Thankyou for your interest!

We respect your privacy andall communication will be treated with confidentiality. If you wish to knowmore about this position or explore other roles, please prepare your updatedprofile and get in touch with our consultant at  cristina.malijan@manpower.com.sg

CristinaMalabuyoc Malijan EA License No. 02C3423 Personnel Registration No. R1111547

Please note that your response to this advertisement andcommunications with us pursuant to this advertisement will constitute informedconsent to the collection, use and/or disclosure of personal data byManpowerGroup Singapore for the purpose of carrying out its business, incompliance with the relevant provisions of the Personal Data Protection Act2012. To learn more about ManpowerGroup's Global Privacy Policy, please visithttps://www.manpower.com.sg/privacy-policy

Job Description

• Industry/ Organization Type: Construction of Buildings
• Position Title: Civil & Structural Engineer
• Working Location: Tuas
• Working Hours: 5.5 Days (Mon – Fri, 8:00 AM – 6:00 PM; Alternate Sat, 8:00 AM – 5:00 PM)
• Salary Package: Basic Salary + Phone Allowance
• Duration: Permanent Role

Key Responsibilities

• Report to the Manager or Team Leader, as shown in the organizational chart. You will be responsible for completing assigned project tasks.
• Study and understand the ISO requirements, technical drawings, project scope, contract details, and sub-contract agreements. Work with consultants to resolve any technical issues before construction begins.
• Submit your work plans to your superior for feedback and approval and carry out tasks according to the approved schedule.
• Ensure the work follows the approved drawings, quality procedures, and EHS (Environmental, Health, and Safety) standards. Focus on keeping the work site clean and organized.
• Handle quality management by keeping accurate records, analyzing results, and creating action plans to improve quality.
• Maintain proper records to meet EHS, quality, client, and regulatory requirements.
• Manage project costs, ensuring that materials are not damaged, and control wastage within acceptable limits. Avoid rework or tasks that could cause delays or increased costs.
• Take on other tasks as assigned by the Project Manager that are needed to complete the project.
• Other ad-hoc duties as assigned
• Report to the Manager or Team Leader, as shown in the organizational chart. You will be responsible for completing assigned project tasks.
• Study and understand the ISO requirements, technical drawings, project scope, contract details, and sub-contract agreements. Work with consultants to resolve any technical issues before construction begins.
• Submit your work plans to your superior for feedback and approval and carry out tasks according to the approved schedule.
• Ensure the work follows the approved drawings, quality procedures, and EHS (Environmental, Health, and Safety) standards. Focus on keeping the work site clean and organized.
• Handle quality management by keeping accurate records, analyzing results, and creating action plans to improve quality.
• Maintain proper records to meet EHS, quality, client, and regulatory requirements.
• Manage project costs, ensuring that materials are not damaged, and control wastage within acceptable limits. Avoid rework or tasks that could cause delays or increased costs.
• Take on other tasks as assigned by the Project Manager that are needed to complete the project.
• Other ad-hoc duties as assigned

APPLY NOW!!!

• Diploma or Bachelor’s degree in Civil & Structural Engineering.
• 2 years of experience in the construction industry
• Experience with HDB projects.
• Attention to detail, strong problem-solving skills, and the ability to work well with a team are key to this role.
• Good communication skills are necessary for working with stakeholders and other teams.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #83975 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Are you an experienced Electrical Engineer ready to power up your career with an industry pioneer? 

Since 1982, LIAN HUAH ENGINEERING PTE LTD has been a cornerstone of Singapore’s built environment. As a well-established BCA Engineering Contractor, we've delivered specialized electrical and mechanical excellence for over 30 years. Now, as we accelerate our growth, we're not just looking for an employee—we're seeking a driven, passionate leader to build the future with us. This is your opportunity to step into a high-impact role where your expertise is valued, your leadership is crucial, and your career path is built for long-term success.

Your Impact: Electrical Project Engineer

As our Electrical Project Engineer, you will be the driving force behind the successful delivery of complex electrical installation projects. You won't just manage tasks; you'll lead dynamic teams, optimize financial performance, and act as the key link between our clients and our site operations. If you're a proactive problem-solver who thrives on turning technical challenges into seamless project wins, we want you on our team.

Key Responsibilities

• Take Command of Project Delivery: Lead cross-functional site teams and subcontractors to deliver projects on time, within budget, and to our uncompromising quality standards. You are the orchestrator of on-site success.

• Drive Financial Acumen: Move beyond simple cost-tracking. Analyze project expenditures, apply value-engineering strategies to boost profit margins, prepare accurate monthly progress claims, and rigorously control budgets.

• Be the Technical Authority: Direct testing and commissioning to validate system integrity. You won’t just hand over a project—you’ll empower our clients by conducting hands-on training for the effective operation and maintenance of their new systems.

• Build Stakeholder Confidence: Be our credible, articulate representative in technical discussions with clients, M&E consultants, and contractors. Your ability to resolve issues and align objectives will be key to our collaborative success.

• Champion a Safety-First Culture: Partner with our Safety team to plan, assess, and enforce robust safety systems, ensuring every colleague returns home safely every day.

• Mentor and Guide: Provide vital technical guidance to site teams and customers on equipment selection and installation methodologies, sharing your expertise to elevate the entire project ecosystem.

What You’ll Bring to the Team

• Educational Foundation: A qualification in Engineering (Electrical) or Building Services.

• Proven Site Experience: A minimum of 2 years of hands-on experience managing electrical installations on local Singapore construction sites. You know the landscape.

• Project Mastery: A demonstrable track record in turnkey and A&A projects, backed by strong technical and on-site expertise.

• The LIAN HUAH Edge – Bilingual Communicator: Your ability to communicate fluently in both English and Mandarin will enable you to build instant rapport and drive clarity with our diverse range of clients, consultants, and on-site trade partners.

• Digital Toolkit: Proficiency in Microsoft Office and Project is essential. Good working knowledge of AutoCAD/Revit will allow you to interact seamlessly with design documentation.

• Resilient Leadership: You lead from the front with high initiative, unwavering resilience under pressure, and the commitment to be predominantly site-based, adapting your hours occasionally to meet critical project milestones.

Ready to Engineer Your Future?

This is more than a job; it’s a career-defining move with a company that invests in your growth. If you have the drive to succeed and the skills to deliver, we want to hear from you.

Job Description & Requirements

• Coordinate with consultant CM, PE, RTO in daily activities, monthly claim, site progress updating, site inspection, testing, and discussion, etc
• Responsible for planning and monitoring of work progress
• Prepare master program and construction sequence for client review, prepare method statement and drawings discrepancies, review project specification and technical clarification
• Handling technical, feedback, suggestions, and engineering problems on site
• Target and ensure the timely and smooth progress of works within the budget time frame
• Coordinate internally with inter-department and externally with clients & consultants
• Update and submit a monthly project report, cash flow and prepare for the extension of time request if required
• Attend management meetings and raise issues that required solutions on-site Oversees construction at site to meet the project progress and quality goals
• Prepare monthly works done calculation claim with Clients and ensure that project schedule is being met & cost control
• Oversee all site projects operations, functions, and requirements, Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required, and to ensure for all submission is submitted in time
• Attend meetings, conduct site inspections on work progress to ensure quality control in accordance to meet authority requirements

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Job Overview
Do you enjoy solving riddles and have an inquisitive mind? Are you passionate about finding the source of a manufacturing process issue that causes a wafer yield breakthrough?

UMC is looking for a Defect Management (DM) Process Engineer to drive for Process Stability in defect reduction activities. You can pursue your passion in semiconductors engineering by utilizing cutting-edge and intelligent operating systems to assist with data analytics and inspection sampling strategy while staying under cycle time constraints. You will work closely with product and process owners to create and manage projects that address wafer and line yield issues.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line defect abnormality escalation, handling and disposition
• Render support in Production ramp-up, New process implementation and process characterization for project success
• Evaluate and implement productivity projects for DM Production, Tool and Cost index improvement
• Define and deploy inspection tool recipes BKM to ensure detection capability
• Assist in Customer audits on inspection strategy deployment and execution
  Perform baseline defect improvement

Qualifications

• Possess at least a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Able to think critically with strong investigating skills
• Possess good communication skills
• Possess good time management skills as well as a strong sense of commitment
• Prior leadership or competition experience in school activities will be an advantage
• Candidates with at least 2 years of relevant prior working experience

Job Description:

1. Develop Technical Expertise:

• Develop technical knowledge of in-house manufacturing processes, products features, benefits and materials to effectively promote Micro-Mechanics products

• Stay updated on industry advancements and product innovations to remain competitive in the market

2. Customer Relationship Management:

• Build and maintain strong relationships with existing and potential customers by understanding their business model, operational needs and pain points

• Serve as primary point of contact for customers, offering customized solutions and addressing inquiries regarding product specifications, applications, and sales related matters in a timely and professional manner

• Ensure customer satisfaction throughout entire sales process by proactively following up and addressing concerns promptly

• Act as an escalation point for any complex or unresolved customer inquiries or quality issues, ensuring that issues are promptly addressed and resolved at the managerial level

• Advocate for customers within organization, ensuring their needs and concerns are heard and managed

3. Sales Strategy Development:

• Collaborate with sales team to implement sales strategies aimed at meeting or exceeding sales targets

• Identify new business opportunities, conduct market research and assess competitors’ offerings

• Lead contract negotiations and manage end-to-end sales cycle, ensuring alignment with customer requirements and company objectives

4. Product Presentations and Improvements:

• Conduct product presentations and meetings with customers to showcase Micro-Mechanics' offerings

• Work with internal team to customize presentations to address customer-specific challenges, ensuring clarity on the advantages and benefits of offered solutions

• Participate in product development process by providing feedback from customers on design, functionality, and performance to improve product offerings

5. Sales Reporting and Performance Tracking:

• Regularly update on market trends, customer feedback, and sales performance through weekly and monthly reports

• Track and analyse sales data to identify patterns, opportunities for improvement, and areas requiring attention

Requirements:

1. Educational Qualification:

• Diploma or bachelor's degree in engineering or related field is typically required

• Advanced certifications or training in sales or technical fields are a plus

2. Industry Experience:

• Previous experience or familiarity with semiconductor or precision manufacturing industries is highly preferred

3. Work Experience:

• 3–5 years of experience in a Sales Engineer, Field Application Engineer, or Technical Sales role, preferably in manufacturing, semiconductor, or industrial environments

• Hands-on experience supporting the end-to-end sales cycle, including customer engagement, technical proposal support, and contract negotiation

4. Communication:

• Excellent communication and interpersonal skills to effectively interact with customers at all levels, build rapport, understand customer’s needs, and deliver sales presentations

5. Problem-Solving Abilities:

• Strong analytical problem-solving skills to assess customer needs, provide technical solutions, and troubleshoot challenges

6. Travel & Flexibility:

• Willingness to travel to meet with customers, attend industry events and internal business development activities

• Flexibility in working hours to accommodate urgent requests and customer schedule in different time zones

7. Customer-Centric Mindset

• Proactive and customer-focused attitude, with commitment to build long-term partnerships and delivering exceptional service

Job Description

• Industry/ Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: West – Tuas (Nearest MRT: Gul Circle)
• Working Hours: 5 Days (Monday – Friday, 8:00 AM – 5:00 PM)
• Salary Package: Basic Salary + AWS + Transport Allowance + OT
• Duration: Permanent Role

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.
• Any ad hoc duties assigned

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Training is provided to inexperienced candidate

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #84843 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities

• In charge of performing routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficienc
• In charge of diagnose mechanical, electrical, and control system issues and implement effective solutions
• Responsible in executing commissioning processes for new chiller installations, ensuring systems are installed correctly and functioning as designed.
• Responsible in providing exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.
• Taking charge of preparing and submiting detailed reports outlining service activities, findings, and recommendations for future improvements.
• Available to respond to chiller breakdown calls during assigned standby shifts.

Requirement

• Min Diploma in Engineering and relevant
• Min 3 years of experience in chiller maintenance, commissioning, or HVAC

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Step into a career with ASM, where cutting edge technology meets collaborative culture. ​

For over 55 years ASM has been ahead of what’s next, at the forefront of innovation and what’s technologically possible. With more than 4,500 ASMers representing 70 nationalities, our people and our advanced semiconductor devices are playing a crucial role in trends such as 5G, cloud computing, AI, and autonomous driving.  But we’re more than just a tech company. We value diversity, inclusion and sustainability as we strive to make a positive impact on the world.  Our development programs help support your growth, shaping your future and pushing the boundaries of innovation to unleash potential.  

Job's mission

As a Senior Engineer, Electrical Engineering at ASM, you will act as a technical lead for electrical systems within advanced semiconductor equipment. You will drive system-level design decisions, ensuring robust architecture, seamless integration, and high-performance delivery. By combining deep technical expertise with strong ownership, you will guide the development of complex systems from concept through production while influencing cross-functional engineering outcomes.

What you will be working on

• Lead the design and development of electrical systems and sub-assemblies, setting technical direction and ensuring alignment with product architecture
• Lead fabrication and test of electrical test structures (ex. MOS capacitors, MIM capacitors, FETs) for semiconductor logic and memory applications
• Own system-level integration, ensuring electrical, mechanical, and control elements work cohesively to meet performance, safety, and reliability targets
• Define and validate digital and analog I/O architectures, enabling flexible, customer-specific configurations
• Drive technical decision-making across new product development, capital projects, and system improvements
• Review and approve engineering changes, ensuring technical integrity, risk mitigation, and adherence to timelines
• Act as a key contributor in design reviews, providing expert guidance and ensuring readiness for production release
• Define and oversee system validation strategies, including hardware testing, instrumentation, and performance verification
• Analyze, understand and interpret electrical test data (ex. CV, IV, Dit) to guide process development and integration of ASM's products such as ALD films
• Evaluate feasibility of new concepts and technologies, solving complex system-level challenges with a structured and innovative approach
• Influence and collaborate with global cross-functional teams, acting as the electrical domain expert
• Mentor and guide junior engineers, elevating technical capability within the team
• Drive high-quality technical documentation, reporting standards, and stakeholder alignment

What we are looking for

• Master’s or PhD in Electrical and Electronics Engineering
• Minimum 5 years of experience in system engineering within semiconductor equipment manufacturing
• Strong expertise in electrical hardware design, system architecture, and integration (e.g., reactors, plasma sources, or similar systems)
• Proven ability to lead technical problem-solving and make system-level design decisions
• Proficiency in AutoCAD and data analysis tools such as JMP
• Hands-on experience in hardware testing, instrumentation, and system validation
• Ability to operate effectively in a fast-paced, global engineering environment
• Strong communication skills in English, with the ability to influence technical discussions

What sets you apart

• Experience acting as a technical lead or subject matter expert on complex engineering projects
• Strong understanding of semiconductor processes and equipment architecture
• Experience defining or improving system validation strategies and test methodologies
• Familiarity with data analysis or scripting tools (e.g., Python)
• Proven track record of driving cost reduction, reliability improvements, or product innovation
• Experience working across regions or with international engineering teams
• Proactive, ownership-driven mindset with the ability to influence without formal authority

Apply today to be part of what’s next.

We make the tech that enables the chips in devices which improve lives around the world. We do this with an eye to the future, pushing the boundaries of what’s possible through cutting-edge innovation, and driving the next wave of technological breakthroughs that shape how we live, work, and connect.

To learn more about ASM, find us at asm.com and on LinkedIn, Facebook, Instagram, X and YouTube.

ASM is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, age, nationality, social or ethnic origin, sexual orientation, gender, gender identify or expression, marital status, pregnancy, political affiliation, disability, genetic information, veteran status, or any other characteristic protected by law.

An Motion Desktop Support Engineer is an IT support role focused on providing technical assistance for client-side hardware and software, including troubleshooting, installation, and maintenance of IT peripherals, and user account management. The role requires excellent communication skills and the ability to work independently and as part of a team to resolve user issues for clients.

Key Responsibilities

• User Support:Troubleshoot hardware and software issues for end-users, both on-site and remotely.
• Technical Assistance:Manage user accounts, provide application support, and assist with installations and migrations.
• Maintenance:Install and configure software, maintain IT peripherals, and perform data backups.
• Issue Resolution:Handle IT-related requests, track incidents, and follow up with vendors to resolve problems.
• Client Interaction:Maintain strong client relationships and provide a high level of customer service.

Required Skills

• Communication: Strong verbal and written communication skills.
• Problem-Solving: Ability to diagnose and resolve technical issues effectively.
• Technical Proficiency: Knowledge of operating systems, software, and hardware.
• Teamwork: Ability to work effectively with colleagues and clients.
• Initiative: Resourcefulness and the ability to work independently.
• Some basic programming understanding preferred. e.g C,C++ sql and etc

Main Working Location - Bishan

Assist the Team Directors in the performance of their duties

· Ensure quality and accuracy of designs

· Offer suggestions to improve the designs

· Produce sketch drawings

· Carry out design calculations

· Check design calculations

· Ensure compliance with Project Design Criteria/Client Brief/ Approved Concept

· Ensure compliance with relevant design standards and office standards

· Check documentation complies with design

· Attend and participate in design meetings

· Ensure compliance with ISO Quality Procedure Manual

REQUIREMENTS

• Recognised Bachelor’s degree or equivalent in Structural Engineering, as a minimum.
• 1-7 years of design experience in a consulting Environment.
• Must have experience in HDB.
• Must have design experience in high rise residential, commercial or mixed development projects.
• Fully familiar and hands-on knowledge of the latest design software.

ADDITIONAL REQUIREMENTS:

• Good interpersonal and communication skills
• Must be fully familiar with European code
• Hands-on experience with the analysis and design of large building projects in structural steel, R.C. and post tensioned concrete

Job Responsibilities:

· Support users through direct end user support or through projects that deliver changes to the end user environment

· Handle end-to-end Desktop refresh and replacement initiative and timely removal of Not Permitted Technology

· Handle user questions, incidents and requests. Tracking, measuring, and escalating as appropriate

· Assist with patching and upgrading end user devices

· Address quality and schedule conflict.

Job Requirements:

· At least 4 years’ experience in all phases of desktop operating system support, implementation, and maintenance, preferably in the financial sector

· Knowledge of desktop operating system and infrastructure required to implement and support enterprise deployments

· Knowledge of Desktop Services security and access standards and practices

· Basic understating of networking and server technologies

· Proficient in supporting a Windows 7 desktop environment & Microsoft suit of applications

· Good communication skills and strong analytical skills.

Interested candidates please send your CV to malar.kannan@eiresystems.com

Responsibilities:

• New Device Introduction: Perform tape-out/tooling operations for customer design database and achieve the goal of first pilot success.
• Project coordination: Customer interface and cross department coordination with seamless communications.
• Manage conference calls, meetings and customer visits with professional presentation skills and logistics arrangement for project success.
• Project management: Documentation, summary, meeting minutes and ability to recap keynote of meetings for management team review.

Requirements:

• MS or Bachelor degree in Electrical engineering or relevant.
• At least 5 years of fab working experience and process integration engineering background is preferable.
• Good knowledge in wafer process flow, semiconductor device physics, wafer foundry service flow.
• Strong in problem solving and project management skills.
• Excellent personality, good interpersonal skills, self-motivated, well-organized and able to perform under pressure.

Job Scope:

• Carry out structural design and produce professional engineering calculation complying to Eurocodes and prevailing building control regulations
• Attending technical meetings with authorities, developer, and contractors
• Prepare technical engineering reports as and when required by authorities or client

Requirements:

• Minimum 2 years of experience as Design Engineer in building construction
• Willing to and with enthusiasm to learn in the field of civil & structural engineering design
• Knowledge with Revit Structure is an added advantage