Total 13,259 job vacancies in Singapore

PLC/ SCADA Associate Engineer 

5 days, 8.30am to 5.50pm

Salary: $3500 +/- depending on experience

Location: Bedok, travelling to site required 

Job scope:

• Responsible for integration and implementation of both hardware and software engineering work
• Carry out proper planning, execution and supervision of the integration work and do QA technical checks throughout the project execution
• Handle application programme change management, hardware deployment management and documentation
• Implementation of PLC/SCADA project from concept to design and programming
• Interface with SCADA and PLC programming
• Meeting with clients, doing reports and documentation
• Perform troubleshoot independently

Requirements:

• Nitec/ Diploma in Electrical/Electronic or related discipline
• 1-2 years of experience or some knowledge in PLC and SCADA
• Site maintenance and travelling around SG for site maintenance is required
• Class 3/3A driving license is required to drive company van

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

Senior Engineer (PLC & SCADA)

5 days, 8.30am to 5.50pm

Salary: $6800-$7000+/-

Location: Bedok 

Job scope:

• Lead the design and development of PLC, SCADA, and control systems (e.g., Siemens, Rockwell, Schneider)
• Integrate hardware and software systems across multiple platforms
• Conduct Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT)
• Support site installation, commissioning, and system troubleshooting
• Collaborate closely with Project Managers, clients, and vendors
• Prepare and review engineering documentation and reports
• Prepare system architecture, control philosophies, and functional design specifications
• Design control panels, wiring diagrams, and I/O lists
• Ensure compliance with client specifications, industry standards, and regulatory requirements
• Configure communication protocols (e.g., Modbus, Profibus, Ethernet/IP, OPC)
• Perform software integration between various subsystems and third-party equipment
• Conduct internal testing and debugging of control systems
• Monitor engineering progress and ensure timely delivery of deliverables
• Coordinate with vendors, subcontractors, and clients on technical matters
• Propose improvements in system design, engineering practices, and workflows
• Mentor junior engineers and provide technical leadership

Requirements:

• Degree in Electrical Engineering, Automation, Mechatronics, or related field
• 5–8 years of experience in system integration / industrial automation
• Strong hands-on experience in PLC/SCADA programming and commissioning
• Familiar with industrial communication protocols (Modbus, Profibus, Ethernet/IP, OPC)
• Experience in control panels and instrumentation systems
• With valid class 3/3A license 

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

Project Security Systems Engineer [Camps Project] X2

• Location Office at Outram Road| Project will be Islandwide depending on assigned project
• Working Hours: Mon to Fri [830am – 6pm] Night and weekend works will be required depending on project requirements
• Salary: Basic up to $4500 + Transport $750 (car) or $400 (motorbike) – must have own vehicle due to site conditions + HP by reimbursement basis

Overall Objective:

• Project Engineers will be responsible for leading and managing projects for security equipment installation, testing, commissioning and system programming in accordance to required standards.

Key Roles and Responsibilities:

• Lead and direct projects and ensure they are directed towards a common objective
• Engage and communicate with stakeholders to deliver project milestones and comply with strict deadlines
• Ensure client satisfaction and manage escalations, acting as point of contact to the client
• Ensure that the project delivers as-sold solution, remains within the baseline budget and is delivered on time whilst maintaining quality criteria and client satisfaction
• Coordinate activities of the project teams through task delegation, resource assignment and programme management
• Ensure proper documentation is in order
• Any other duties as assigned

Job Requirement:

• Minimum Diploma in Electronics & Communication Engineering or related field
• Preferably with 2 years’ relevant work experience in project management for security systems
• Technical knowledge on ELV, Networking and Security Systems (CCTV, Card Access, Alarm System) required

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

Project Security System Engineer [Commercial Project]

• Location: Office at Outram Road| Project will be Islandwide depending on assigned project
• Working Hours: Mon to Fri [830am – 6pm] Night and weekend works will be required depending on project requirements
• Salary: Basic up to $4500 + Transport $750 (car) or $400 (motorbike) or by reimbursement basis + HP by reimbursement basis

Overall Objective:

• Project Engineers will be responsible for leading and managing projects for security equipment installation, testing, commissioning and system programming in accordance to required standards.

Key Roles and Responsibilities:

• Lead and direct projects and ensure they are directed towards a common objective
• Engage and communicate with stakeholders to deliver project milestones and comply with strict deadlines
• Ensure client satisfaction and manage escalations, acting as point of contact to the client
• Ensure that the project delivers as-sold solution, remains within the baseline budget and is delivered on time whilst maintaining quality criteria and client satisfaction
• Coordinate activities of the project teams through task delegation, resource assignment and programme management
• Ensure proper documentation is in order
• Any other duties as assigned

Job Requirement:

• Minimum Diploma in Electronics & Communication Engineering or related field
• Preferably with 2 years’ relevant work experience in project management for security systems
• Technical knowledge on ELV, Networking and Security Systems (CCTV, Card Access, Alarm System) required

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

Job Description

• Industry/ Organization Type: Chemical Manufacturing
• Position Title: QA Engineer
• Working Location: Tuas (Walk distance from MRT)
• Working Hours: 5 Days, Monday – Friday (8.30am – 5.30pm)
• Salary Package: Basic Salary + Allowances + AWS + VB
• Duration: Permanent

Key Responsibilities

• Manage incoming inspections and evaluate supplier performance, identifying trends and implementing quality improvements.
• Track product quality from incoming to outgoing stages using SPC, ensuring compliance with customer specifications.
• Maintain and update QA documentation in line with ISO standards and internal quality systems.
• Work closely with cross-functional teams to resolve quality-related issues across departments.
• Ensure the accuracy and integrity of QA data and records according to established procedures.
• Investigate quality issues, perform root cause analysis, and implement corrective actions.
• Support customer queries by preparing and coordinating quality-related documentation.
• Prepare and review quality documents (e.g. COA, reports) in accordance with procedures and customer requirements.
• Handle customer complaints by conducting investigations and ensuring timely resolution with proper documentation.
• Coordinate sample evaluations and ad-hoc sampling activities, analysing data to support quality decisions.
• Plan and participate in internal and external audits to ensure compliance and audit readiness.
• Conduct risk assessments, FMEA, and training, while supporting continuous improvement initiatives.
• Promote and participate in company quality and EHS programmes.
• Carry out additional duties as assigned in line with business needs.

APPLY NOW!!!

• Diploma or Degree in Chemical, Science, or a related discipline.
• Minimum 2-3 years of relevant experience.
• Solid knowledge of quality control practices and statistical analysis techniques.
• Effective communication skills, both written and verbal, with good interpersonal and presentation abilities.
• Familiarity with ISO9001, ISO14001, and ISO45001 standards will be an added advantage.
• Proficient in Microsoft Office applications.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #83859 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

You will be responsible for designing, deploying, and optimizing cloud infrastructure solutions to ensure security, performance, and cost-efficiency. You will work with cloud-native technologies, automate infrastructure deployment, and ensure system resilience through high availability and disaster recovery strategies.

Responsibilities:

• Design, deploy, and maintain cloud infrastructure and services using Infrastructure as Code (IaC) tools such as Terraform and AWS CloudFormation.
• Implement and manage CI/CD pipelines using 3rd party or native cloud tools and services to streamline deployment and automation processes.
• Monitor and troubleshoot cloud environments to ensure high availability, disaster recovery, and optimal performance.
• Ensure security best practices and compliance with industry standards by managing IAM policies, encryption, and network security controls.
• Configure and manage cloud networking, optimize traffic routing, and enhance connectivity solutions.

Requirements:

• A degree in Computer Science, Information Technology, Engineering, or a related field.
• At least 5 years' experience in designing, deploying, and managing cloud infrastructure and services on AWS or other cloud platforms.
• Strong knowledge of Infrastructure as Code (Terraform, CloudFormation) and cloud automation strategies.
• Familiarity with networking concepts, cloud security best practices, and compliance frameworks.
• Experience with monitoring and troubleshooting cloud environments to ensure reliability and scalability.
• Ability to work in a fast-paced environment and collaborate with cross-functional teams to support cloud infrastructure needs.

Role Overview

You will create, deploy, maintain, and troubleshoot WAF policies across F5 ASM and cloud platforms (Azure / AWS), acting as the organisation’s primary defence against web-based threats.

Working closely with development and security teams, you will design protective controls tailored to specific applications, reduce false positives, and continuously mature the organisation’s protection posture.

Key Responsibilities

WAF & Application Security

• Configure and manage F5 ASM and cloud WAF policies (Azure / AWS) for new and existing web applications

• Review vulnerability findings and develop WAF virtual patching solutions to rapidly mitigate risk

• Monitor and analyse activity logs to detect malicious traffic and indicators of compromise

• Work with developers to implement protective controls customised for specific applications

• Interpret web protocol data to determine source, intent, and risk level of threat agents

• Review WAF usage and define improvements to mature protection policies

Vulnerability & Firewall Management

• Manage the end-to-end vulnerability lifecycle — assessment, reporting, and stakeholder remediation engagement

• Execute firewall change requests and resolve connectivity issues arising from firewall policies

• Provide preventative maintenance and rapid troubleshooting to ensure infrastructure and application stability

• Apply understanding of routing, NAT, ARP, and tools such as tcpdump to trace and resolve data-flow issues

• Review vulnerability scan output and assess where WAF configuration can be used to mitigate attacks

Operations & Reporting

• Utilise SIEM platforms to create custom security reports and operational dashboards

• Prepare regular reports including monthly firewall / WAF log reviews and rules reviews

• Participate in technical design activities to identify infrastructure impact and ensure sound architecture

• Create and maintain technical documentation — network diagrams, policies, and operational procedures

• Support daily security operations and assist in audit event collection and reporting

Required Experience & Skills

1.Network & Infrastructure Security

IPS, WAF, Load Balancers, Network Firewalls (e.g. Palo Alto)

Network security fundamentals and data flow technologies

Mainstream OS familiarity across a wide range of security tools

Understanding of routing, NAT, ARP, and packet analysis

2. Application & Cloud Security

Application security concepts and web application technologies

Security vulnerability scanning and assessment methodologies

Cloud security experience (Azure / AWS WAF configurations)

Full understanding of the application project lifecycle

3. SIEM & Audit

Proficiency in SIEM platforms with custom report / dashboard development

Experience with audit event collection and reporting toolsets

Vulnerability management processes and stakeholder engagement

4. Soft Skills

Proven analytical and problem-solving abilities

Self-motivated, detail-oriented, and collaborative team player

High integrity, strong communication skills, positive demeanour

Ability to research emerging IT security issues and products

Certifications

A recognised security qualification is preferred. Suitable certifications include:

F5 CTS-ASM

CISSP

CISM

ISC2

CEH

PCNSE

We’re Hiring: Senior Engineer / Principal Engineer (PMO / SMO)

Be part of a critical technology initiative supporting a full‑scale enterprise platform that enables effective project delivery, operational continuity, and data‑driven decision‑making. This role is ideal for an experienced professional with strong project management, system management, and vendor coordination capabilities who thrives in complex, multi‑stakeholder environments.

We are seeking an experienced Test Engineer to drive quality across the Agile development lifecycle. You will design and execute test strategies, ensuring delivery of reliable, secure, and high-quality software while collaborating closely with developers, product owners, and stakeholders.

Key Responsibilities

• Design and execute test strategies, plans, and cases based on acceptance criteria
• Perform manual and automated testing across functional, integration, system, and UAT stages
• Contribute to test automation and continuous testing in CI/CD pipelines
• Identify, track, and resolve defects in collaboration with developers
• Support Agile teams with early and frequent testing in each sprint
• Prepare UAT artefacts, validate functionality, and ensure audit-ready documentation
• Maintain clear test plans, results, and defect reports

Requirements

• Bachelor’s degree in a relevant field (or equivalent experience)
• 5+ years in software QA/testing within Agile environments
• Strong experience in manual and automated testing
• Familiarity with tools such as Selenium, Cypress, JUnit, or TestNG
• Understanding of Agile testing and CI/CD practices
• Strong collaboration, problem-solving, and documentation skills

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to qianyu@talentsis.com.sg for immediate processing.

Only shortlisted candidates will be notified.

Key Responsibilities:

1. Manage on-site construction activities, supervise workers and ensure projects are carried out safely, efficiently

and according to schedule

2. Oversee construction quality, safety compliance and site operations in accordance with Singapore BCA andWSH regulations.3. Coordinate with main contractors, consultants and suppliers to resolve site issues and ensure smooth project

progress.

4. Review construction drawings, prepare method statements, daily reports and project documentation.

5. Lead and manage the site team to maintain productivity, safety standards and work discipline.

Requirements:

1. Diploma in Civil Engineering. Construction Management, Engineering Supervision or relatedbuilding/construction discipline

2. Minimum 3 years of working experience in construction site management or supervision.3. Able to read and understand construction drawings and technical specifications.4. Familiar with construction safety requirements and quality control procedures5. Good leadership, communication and coordination skills.6. Physically fit to work on construction site and able to work on shift when required.

Defectivity Data Analytics Engineer

We are seeking a skilled Data Analytics Engineer to join our Defectivity Engineering team in the wafer fabrication fab. The ideal candidate will leverage data analytics, statistical methods, and engineering knowledge to identify, analyze, and reduce wafer defects, improving yield and process quality.

The Job

• The Defectivity department is a Site function, meaning that you will have the opportunity to work closely with both Defectivity Fab SG6/8 and Fab SG8E.
• Develop and implement data-driven models and algorithms to detect defect patterns and root causes.
• Collaborate with process engineers, equipment engineers, and quality teams to translate data insights into actionable process improvements.
• Support the integration of advanced analytics and machine learning techniques for predictive defect detection.
• Participate in cross-functional problem-solving teams to address complex defectivity challenges.
• Ensure compliance with fab safety, quality, and documentation standards.

Requirements

• Bachelor’s or Master’s degree in Engineering, Data Science, Statistics, or related field.
• Strong experience in data analytics, preferably in semiconductor manufacturing or wafer fabrication.
• Proficiency in programming languages such as Python, R, or SQL.
• Familiarity with statistical software and data visualization tools (e.g., Spotfire, Power BI).
• Understanding of semiconductor fabrication processes and defectivity mechanisms.
• Excellent problem-solving, communication, and teamwork skills.
• Ability to work in a fast-paced, dynamic manufacturing environment.

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solar's Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for REC's strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, India's largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

We are looking to hire an experienced, highly motivated, hands-on individual who will be responsible for the day to day operations with regards to Health Safety and Environment, so that to achieve ZERO LTI for the plant.

• Team Member of HSE function, drive for continuous improvement by implementing up-to-date standards to comply to local codes requirements.
• Drive towards HSE KPI for Operations and safety awareness programs to promote safety culture mindset.
• Conduct Risk Assessments, Safety audit and improvement.
• Comply with Environmental, Health and Safety requirements, Code of Practice and Guidelines.
• Conduct incident/accident investigation process including root cause analysis and ensure corrective actions are completed.
• Assist/Coordinate WHSE Safety Committee meeting and organize HSE Inspections.
• Maintain accurate records and documentation of the HSE management system.
• Coordinate /Assist /Conduct HSE, CERT and Emergency Response Training and relevant activities.
• Co-ordination between suppliers/ contractors, planning/ scheduling contractors work regarding safety matters.
• Performs other duties as assigned. Duties will vary according to the operational requirements of the department and/or the specific goals of the division.

WORK LOCATION: Onsite at REC Solar, 20 Tuas South Avenue 14 Singapore 637312
(Company transport available to/from selected locations islandwide.)

• Diploma / Engineering Degree with at least 1-3 years relevant experience in the field of HSE. New graduates are also encouraged to apply.

• Familiar with Microsoft 365 Applications
• Skills and abilities to perform job include: analytical communication, presentation skills, problem solving and troubleshooting skills, computer literacy, interpersonal skills, exercises mature judgment; ability to work in a team, as well as, ability to influence other people
• Must have a good and positive attitude
• A good team player with pleasant personality.
• Work together with shift technicians and coach them

Responsibilities:

• Manage and maintain network infrastructure, including switches, firewalls, and VPNs.
• Monitor data center operations for optimal performance and security.
• Design and implement digital infrastructure solutions.
• Collaborate with IT teams to ensure seamless system integration.
• Troubleshoot and resolve infrastructure issues efficiently.
• Stay updated on industry trends and emerging technologies.

Requirements:

• Bachelors degree in IT, Computer Science, or related field (Diploma with 4+ years of experience accepted.
• Experience in servers, storage, network infrastructure, and data centers.
• Strong knowledge of network security, protocols, and best practices.
• Proficiency in virtualization (Hyper-V preferred) and scripting (PowerShell, Python).
• Certifications like CCNA, MCSE, or equivalent preferred.
• Excellent problem-solving, teamwork, and communication skills.

To apply, please visit www.gmprecruit.com and search for Job Reference: W36V3736

To learn more about this opportunity, please contact Yingying at yingying.lai@gmprecruit.com

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lai Yingying | Registration No: R1110239

Roles & Responsibilities

• To assist Project Manager to handle and calculate the quantity and costing of the different tender assignments. Technical review on the supplier/contractor quotation or proposal and makes sure that all requirements are complied.
• Familiar and able to understand general contracts and various tender documents.
• Able to provide budget cost or estimates as per instruction.
• Liaise with suppliers for their products and services presentation
• Able to look for solution regarding any technical problems during tender.
• Able to communicate with other Departments in dealing with various documents and issue
• Coordinate with the supplier/contractor regarding follow up on bills and quantities
• To evaluate and check on market unit rates monthly/Quarterly for material and labour cost
• To hand over all tender document and costing to project team once the tender is awarded
• To attend site show round for those tender that we are interested
• To reply tender clarification, preparation for tender interview and presentation
• Experienced in new built projects will have an advantage

Requirements

• Singaporean ONLY
• Diploma in M&E / Electrical Engineering, as a Quantity Surveyor for 3 - 5 Years
• Work in Subcontractor environment is an advantage

Job Summary: We are seeking a skilled and motivated Engineer with specialized experience in Marine & Reclamation project management and technology. This role is critical in providing technical expertise to support our Market Development and Project Management initiatives. The successful candidate will contribute to winning new business and ensuring the successful technical delivery of complex coastal and reclamation projects.

 Key Responsibilities (Job Description):

1. Technical Support for Market Development:

Ø  Assist the business development teams by providing technical input for proposals, tenders, and client presentations related to marine and reclamation projects.

Ø  Participate in client meetings and site visits to understand project needs and articulate technical solutions.

Ø  Contribute to feasibility studies, preliminary designs, and cost estimations for new project opportunities.

2. Project Engineering & Delivery Support:

Ø  Provide engineering design, analysis, and technical oversight for marine structures (e.g., seawalls, breakwaters, jetties) and land reclamation projects.

Ø  Prepare and review technical drawings, specifications, calculations, and reports.

Ø  Support project managers in planning, coordination, and monitoring of project phases (design, procurement, construction, supervision).

Ø  Conduct site inspections and liaise with contractors to ensure works adhere to design specifications, quality standards, and safety regulations.

3. Design & Analysis:

Ø  Perform engineering analyses related to coastal processes, hydrodynamics, sediment transport, geotechnical stability, and foundation design for reclamation areas.

Ø  Utilize engineering software for modeling and design tasks.

4. Documentation & Compliance:

Ø  Ensure all engineering deliverables comply with relevant national and international codes, standards, and environmental guidelines.

Ø  Maintain accurate project documentation and assist in the preparation of progress and final reports.

5. Collaboration:

Ø  Work closely with senior engineers, project managers, and multidisciplinary teams (geotechnical, environmental, planning).

 Requirements:

 1.  Education & Certification:

Ø  Bachelor’s degree in Civil Engineering, Coastal Engineering, Ocean Engineering, Geotechnical Engineering, or a directly related field. A Master’s degree is advantageous.

Ø  Progress towards or holding a relevant professional engineering license/certification (e.g., EIT, PE, or international equivalent) is preferred.

 2.  Experience:

Ø  Minimum of 5 years of direct hands-on experience in the engineering design and/or project delivery of marine and reclamation projects.

Ø  Demonstrated involvement in at least one major land reclamation project is highly desirable.

Ø  Experience in a consulting or contractor environment is preferred.

 3.  Technical Skills:

Ø  Solid understanding of marine and reclamation engineering principles, including dredging, ground improvement, coastal protection, and marine structures.

Ø  Proficiency with relevant engineering software (e.g., AutoCAD, Civil 3D, GIS tools, hydrodynamic or geotechnical modeling software).

Ø  Familiarity with project management tools and methodologies.

4.  Soft Skills & Competencies:

Ø  Strong technical writing and verbal communication skills in English.

Ø  Excellent analytical and problem-solving abilities.

Ø  Proactive team player with the ability to manage multiple tasks and meet deadlines.

Ø  Client-focused attitude and commercial awareness.

5.  Other:

Ø  Willingness to travel to project sites and client offices as required.

Ø  Must be eligible to work in the specified location.

Job Description & Requirements

Job Summary: We are seeking a skilled and motivated Engineer with specialized experience in Marine & Reclamation project management and technology. This role is critical in providing technical expertise to support our Market Development and Project Management initiatives. The successful candidate will contribute to winning new business and ensuring the successful technical delivery of complex coastal and reclamation projects.

 Key Responsibilities (Job Description):

1. Technical Support for Market Development:

Ø  Assist the business development teams by providing technical input for proposals, tenders, and client presentations related to marine and reclamation projects.

Ø  Participate in client meetings and site visits to understand project needs and articulate technical solutions.

Ø  Contribute to feasibility studies, preliminary designs, and cost estimations for new project opportunities.

2. Project Engineering & Delivery Support:

Ø  Provide engineering design, analysis, and technical oversight for marine structures (e.g., seawalls, breakwaters, jetties) and land reclamation projects.

Ø  Prepare and review technical drawings, specifications, calculations, and reports.

Ø  Support project managers in planning, coordination, and monitoring of project phases (design, procurement, construction, supervision).

Ø  Conduct site inspections and liaise with contractors to ensure works adhere to design specifications, quality standards, and safety regulations.

3. Design & Analysis:

Ø  Perform engineering analyses related to coastal processes, hydrodynamics, sediment transport, geotechnical stability, and foundation design for reclamation areas.

Ø  Utilize engineering software for modeling and design tasks.

4. Documentation & Compliance:

Ø  Ensure all engineering deliverables comply with relevant national and international codes, standards, and environmental guidelines.

Ø  Maintain accurate project documentation and assist in the preparation of progress and final reports.

5. Collaboration:

Ø  Work closely with senior engineers, project managers, and multidisciplinary teams (geotechnical, environmental, planning).

 Requirements:

 1.  Education & Certification:

Ø  Bachelor’s degree in Civil Engineering, Coastal Engineering, Ocean Engineering, Geotechnical Engineering, or a directly related field. A Master’s degree is advantageous.

Ø  Progress towards or holding a relevant professional engineering license/certification (e.g., EIT, PE, or international equivalent) is preferred.

 2.  Experience:

Ø  Minimum of 5 years of direct hands-on experience in the engineering design and/or project delivery of marine and reclamation projects.

Ø  Demonstrated involvement in at least one major land reclamation project is highly desirable.

Ø  Experience in a consulting or contractor environment is preferred.

 3.  Technical Skills:

Ø  Solid understanding of marine and reclamation engineering principles, including dredging, ground improvement, coastal protection, and marine structures.

Ø  Proficiency with relevant engineering software (e.g., AutoCAD, Civil 3D, GIS tools, hydrodynamic or geotechnical modeling software).

Ø  Familiarity with project management tools and methodologies.

4.  Soft Skills & Competencies:

Ø  Strong technical writing and verbal communication skills in English.

Ø  Excellent analytical and problem-solving abilities.

Ø  Proactive team player with the ability to manage multiple tasks and meet deadlines.

Ø  Client-focused attitude and commercial awareness.

5.  Other:

Ø  Willingness to travel to project sites and client offices as required.

Ø  Must be eligible to work in the specified location.

Key Responsibilities:

• Assist in the design and development of bus / rail infrastructure projects ensuring compliance with industry standards and client requirements.
• Support project management activities including scheduling, resource allocation, and progress monitoring.
• Coordinate with internal teams and external partners to align project deliverables and address technical challenges.
• Prepare technical reports, design documents, and presentations for various stakeholders.
• Contribute to the evaluation and selection of appropriate materials, technologies, and engineering methods for project execution.
• Participate in site inspections and testing to ensure adherence to quality and safety protocols.
• Maintain up-to-date knowledge of advancements in bus / rail technology and urban mobility trends.

Requirements

• Diploma in Engineering or a related field, preferably with experience or interest in bus / rail systems or urban mobility solutions.
• Demonstrated analytical and problem-solving skills with attention to detail.
• Strong communication and interpersonal skills to effectively collaborate with diverse teams.
• Proficiency with engineering software tools and Microsoft Office suite.
• Willingness to learn and adapt in a dynamic project environment.
• Commitment to upholding safety standards and company values.

Position Summary:
An Associate End User Computing (EUC) Engineer provides technical support to end users, assisting with hardware and software issues, and ensuring smooth operation of IT systems. This entry-level role involves responding to service tickets, performing system maintenance, and supporting the implementation of new systems.

Roles & Responsibilities:
Technical Support
• Provide technical assistance to end users for hardware and software issues.
• Respond to, document, and resolve service tickets in a timely manner.
• Assist users with installations and configurations of IT equipment.

System Implementation
• Support the installation and testing of new hardware and software.
• Ensure integration and compatibility of new systems with existing infrastructure.
• Assist in the development of new report templates and formats.

System Maintenance
• Perform routine system maintenance and backups.
• Participate in disaster recovery drills and system recovery processes.
• Maintain documentation of system activities and procedures.
• Conduct research on new technology 

Issue Resolution
• Identify, diagnose, and resolve technical problems.
• Simulate user issues to troubleshoot and resolve operating difficulties.
• Develop preventive measures and solutions to reduce user problems.

Collaboration and Development
• Work with cross-functional teams to understand support requirements.
• Assist in the development of checklists and methods for issue resolution.
• Provide support and guidance to colleagues with less experience.

Requirements/ Qualifications:

• Bachelor in Computer Engineering
• Min 6-8 years of experience in relevant fields 
• ITIL certified 
• Have experience supporting VIP users
• Experience with procurement including submit purchase request, verify invoices, etc.
• Good written and interpersonal communication skills
• Able to support 24/7 standby support as well
• Excellent stakeholder management skills
• Experience supporting the senior management. The person would need to have experience with stakeholder management. Ideally with experience supporting VIP.
• The person would be good to have IT procurement experience. Support the procurement for cluster EUC, including submit purchase request, verify invoices, etc.
• 1 year contract

Network Engineer / Senior Network Consultant

Our Esteemed and Reputable Client is looking for a Network Engineer / Network Consultant.

Requirements:

• Proficient in handling Network Infrastructure.

• Good in Network LAN, WAN administration and configuration.

• Proficient in LAN/WAN Systems, Routers, Switches, Firewalls, Servers, Storage, Backup, Operating Systems and applications.

• Experience in Enterprise Network Management.

• Experience in System and Network configuration and troubleshooting.

• Good in System,Windows, Server Configuration and Administration.

• Possess CISCO Certifications.

• Good in liaising with Stakeholders, Clients and Business Users.

• Min. 6 years of Network management experience.

• Min. Diploma/ Degree in any related discipline.

• Strong communication and persuasion skills

*** Junior roles are available for candidates with less than 6 years of Network experience.

We respect your privacy and all communication will be treated with confidentiality.

Applicants who are not shortlisted may be considered for other similar positions.

If you have meet the job requirements that we are looking for or wish to find out more on this role, please contact us or apply in-confidence to us with you updated MS Word Resume to : jeline@starcareerconsulting.com

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

1.     Manage projects / Product or Process Change and Enhancement

a.      Liaise with stake holders on requirements, technical specifications, deadlines, work schedules, feasibility, implementation and validation.

b.     Assist in product design change project that affects product performance.

c.      Lead change control process, specification change and validation activities.

2.     To improve the capability of the manufacturing processes with higher predictability and lower production costs.

a.      Identify productivity improvement opportunities, recommend changes to machine parts designs, conduct feasibility studies and liaise with the stake holder on the implementation.

b.     Effective use of Lean tools to improve overall machine performance (eg, OEE).

c.      Implement Energy / Water conservation projects.

d.     Ensure process is stable and capable of meeting all product requirements while maintaining  a safe working environment. Verify that machine-produced parts are of acceptable quality, safe to operate and  environmentally friendly. Conduct validation studies and process investigations.

3.     Support manufacturing and maintenance engineering.

4.     Analyze machine and/ or process issue related to customer complaint and implement effective corrective and preventive action.

a.      May include leading a group of technicians to support manufacturing activities. Study parts life and establish PM schedule for TPM activities.

5.     Label Change

a.      Evaluate project requests from countries or regions with Plant operations, quality and planning to conduct feasibility studies to determine technical specifications, validation, deadlines and implementation.

b.     Work with supply chain and marketing on deadlines to implement changes and product transition to new changes.

c.      Draft label copy artworks and drawings in accordance with requirements and technical specifications.

d.     Liaise with procurement / vendors on requirements and verifications of product samples.

e.      Interact with Regulatory Affairs & Marketing on latest developments in regional requirements in respective countries and implementing those changes to meet requirements.

6.     Responsible for compliance with Environment, Health & Safety (EHS) procedure and requirement.

Qualification / Education

·       Degree in Mechanical/Mechatronic Engineering or equivalent

Skill Set / Experience

·       Degree with Min 3 years experience

·       2-3 years experience in engineering projects management and coordination

·       Good engineering background in industrial automation, electrical and controls engineering

·       Experience in new manufacturing machinery commissioning, debugging and validation

·       Familiarize with basic GMP and other relevant requirements for medical/ pharmaceutical products manufacturing

·       Knowledge of Installation Qualification (IQ)/Operational Qualification (OQ)/Performance Qualification (PQ) would be an added advantage.

Responsibilities

• Administrating Active Directory and Windows Update Services

• Manage and maintain all Active Directory objects, DNS records and Group Policies, handling requests for creation and removal of related items

• Assisting the Support Engineer or Software Engineer in problem resolution beyond the capability of the 1st Level Support Staff. 

• Performing system recovery if needed.

• Escalating unsolvable problems to the 3rd Level Support Staff and reports the escalation to superior.

• Ensuring that the System runs according to contractual specifications after problem resolution.

• Providing advice on system / database performance monitoring and tuning.

• Ensuring deployments of approved patches/releases are implemented accordingly to Change Request.

• Complete all Service Requested accordingly to SLA timeframe.

• Assisting the Customer in the verification, isolation and/or provision of a temporary work-around for the problem logged beyond 2nd Level Support Staff capability. 

• Escalating unsolvable system problems and service request to the OEM/Vendor for technical support.

• Coordinating system development tasks to include design, integration and formal testing on the Change Request.

• Overseeing all transitions into production on the Change Request.

• Developing and complete actions in system specifications, technical and logistical requirements and other disciplines on the Change Request.

• Creating and maintain programmatic and technical documentation to insure efficient planning and execution on the Change Request.

• Managing and document system configurations on the Change Request.

• Perform troubleshooting and resolve incident based on SLA.

• Generating the relevant administrative records and reports.

Requirements

• Degree/Diploma in Computer Science, Computer Engineering or equivalent, although consideration will be given to experience and certifications in lieu of degree.

• Minimum 3 to 5 years IT experience

• Past working experience in Cloud environment is an advantage

• Able to handle demanding service response and recovery turnaround

• Able to manage daily support tasks to meet stringent SLA requirements

• Preferably with Microsoft Certification and/or ITIL certification.

• Dynamic, customer oriented, experience working in a fast paced environment.

• Good Knowledge of following products will be advantageous:-Linux,Unix,Active Directory/DNS/GPO, ADFS, Microsoft Azure Stack,Microsoft Windows 2016-2022

Licence no: 12C6060

Core Responsibilities

• Set up and Test: You will put machines together, align the parts, and calibrate the sensors. You’ll also run final tests to make sure everything works perfectly.

Candidate Qualifications

• Educational Background: Diploma or NITEC in a relevant Engineering discipline.

• Professional Experience: 1 year in a hands-on technical or assembly role.

• Training would be provided for those without experience

• Technical Literacy: Skilled in interpreting complex schematics (both electrical and mechanical) for assembly and diagnostic purposes.

• Technical Skills: Good knowledge of automated tools, including motors, sensors, and air-powered systems.

  • The ability to read and follow technical drawings and wiring maps.

• Extra Skills: It helps if you have worked with motor tuning or camera-based inspection systems before.

If you are interested in the position , kindly send your CVs in to jasper.soh(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving your current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R25154228

Overall Summary:

Mainly supporting security aspect like firewall checkpoint, security appliances - configuration, troubleshooting, capacity planning. Supporting current operation and deployment of resiliency project. This is a 2-year direct contract position.

Roles and Responsibilities:

• Directly reporting to Security Senior Manager
• Assist Architect team on new infrastructure design, implementation, and management of network solutions that form the core infrastructure, ensuring seamless integration across different platforms. This includes procurement of necessary equipment.
• To provide comprehensive product knowledge on the data technology required to deliver, support the networks infrastructure.
• Collaborate with the team to identify network and system needs, monitor performance metrics, troubleshoot, and resolve network-related issues, and implement improvements.
• Deliver project management for network activities encompassing upgrades, deployments, and migrations. Provide technical guidance and user support as required.
• Develop, maintain, and update documentation covering the network environment and operational procedures.
• Generate reports and detailed documentation outlining findings, implemented solutions, and recommendations for further enhancements.
• Oversee network environment to maximize performance, scalability, and minimize downtime.
• Closely coordinate and conform to Change Management policies, process, and procedures on any network changes.
• To implement approved changes, troubleshoot to identify root causes and implement effective solutions.
• Experience on Automating daily network tasks using scripting.
• Be available to provide on-call support as needed.

Qualifications/ Requirements:

• Minimum Bachelor in Computer Engineering or equivalent
• Must equipped with CCNP or CCIE
• Network Infrastructure & Hardware: 5+ years experience managing large enterprise network with a strong focus on F5, Palo Alto, Cisco, and CheckPoint Technology.
• Network Devices: In-depth knowledge and proficiency with switches, firewalls, load balancers, routers, and ISE.
• Network Design & Troubleshooting: Expertise in designing, monitoring, and network & incident management (LAN, WAN, VPN).
• Strong experience with automation tools: Ansible, Python - Automate in operation / project work before
• Experience with Deployment and automation, advantage to have experience building data center
• Proven track record of success in a fast-paced IT environment.
• Excellent communication and interpersonal skills, allowing you to effectively collaborate with both technical and non-technical stakeholders.
• Ability to work under pressure and delivery the project on time with minimum supervision.
• Certified and experienced with the mentioned technologies.

Overall Summary:

The Network Engineer is responsible for thedesign, installation, configuration and maintenance of Software Defined Network (SDN) infrastructure. His/her primary responsibilities include the design and buildof network infrastructure components, and integrating technologies from various virtualised servers and storage vendors. He/She manages and optimises complexcore networks and configures network equipment and software to ensure alignmentwith defined network performance levels and security standards and regulations.He/she collaborates across network and orchestration teams to ensure the smoothdelivery of end-to-end network slicing and automation solutions. He/she is knowledgeable in the use of networking systems and devices, firewalls, wirelesscontrols and technology, network standards including 5G, and network routing protocols.

He / She leads projects, prioritises andassigns tasks to ensure that team’s resources are used effectively and thatinfrastructure projects are implemented in accordance with plans and budgets.

Candidate is required to be on standby with on-call availability with varied shiftsincluding nights, weekends and holidays. He / She is organised with stronganalytical and troubleshooting skills and has a passion for innovation and newtechnologies and is adaptable to dynamic environments. Candidate must also beable to work well with the team and able to guide them to ensure infrastructure projects are well implemented.

Role and Responsibilities:

Project Management

• Assist with the planning and design of infrastructuresystems

• Assist with the documentation ofinfrastructure design and planning activities and decisions.

• Stakeholder Management

Configure & Administer Network

• Design cost-effective network systems and services that meet productspecifications and comply to standards and best practices

• Prepare and execute test plans including integration, performance, coverageand capacity verification

• Review technical documents for processes, technology and devices

• Designate the direction for Local Area Network (LAN) and/or Wide Area Network(WAN), internet, wireless, and remote access services

• Validate the Software Defined Network (SDN) infrastructure within the ITecosystem

• Oversee the installation, upgrading, operation, control, maintenance andeffective use of LAN and/or WAN for the communication of data, voice, text orimages

• Perform technical evaluation and proof-of-concept of new technologies fornetwork infrastructure

• Review releases, upgrades and fixes available from systems software andsupplies and identify those which merit action

Manage Network Operations & Incidents

• Manage network infrastructure to ensure alignment of technical requirements

• Provide technical inputs on the procurement of network equipment and ensurecompliance with procurement policies

• Develop the disaster recovery plan, processes and protocols for disasterrecovery of network infrastructure

• Ensure disaster recovery plan testing activities are performed and technicalcriteria are met

• Perform network fault troubleshooting and root cause analysis to locate sourcesof network issues

• Develop and verify recovery solutions in test environments and execute inproduction network

• Implement automation workflow for the management of repeated network issuesin collaboration with relevant teams

• Plan and coordinate network security measures for network infrastructure,software and data

Qualification/ Requirements:

• Possess a diploma or degree in Engineering or IT or a Bachelor’s degree in Computer Science.
• Cisco Certified Network Associate/ Professional (CCNA / CCNP-Enterprise) or equivalent
• Minimum of 5 years’ experience and strong knowledge in Enterprise IT infrastructure, including routing, switching, wireless and load balancers and project management experience.
• Good to have security background of firewall , F5 and proxy
• Experience with Cisco products and NAC (network access control)
• Able to do procurement papers for approvals
• Solid technical skills in networking, and security.
• Strong problem-solving skills with the ability to troubleshoot and resolve complex technical issues efficiently.
• Excellent communicationskills to collaborate effectively with team members and stakeholders.
• Comfortable to support 24/7 standby
• Open to travel to different sites
• Comfortable to 2 years direct contract

Project contract based (estimate project completion: 2027)

M&E Engineer

• Work Location: Changi, office at (Lavender area)

• Working days: 5.5 days 8am to 5pm, Alternate Saturday 8am to 5pm Full Day

• Salary: $3000 to $4000

• Degree in Mechanical or Electrical Engineering or equivalent

• Good technical knowledge in mechanical & electrical trades.

• Good knowledge of Local Code/Regulation Knowledge pertaining to M&E services, building construction, and safety.

Job scope

• Control site progress & installation quality as per approved Shop Drawings, Technical Submissions, and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion.

• Appraisal for works/products compliance to Specifications/Requirements and selection recommendation.

• Responsible for M&E drawing coordination and production of CSD and individual service drawings quality.

• Responsible for conducting QA/QC inspection, managing RE, RTO, and responsible for clearing QA/QC inspections to meet with construction schedule.

• Provide and maintain all site inspection records & T&C records up to date.

• Responsible for variation order cost collection, cost verification of the VO works, and making necessary recommendations for VO prices.

• To check, evaluate, and confirm work done and material supply quantity status for the purpose of M&E sub-contractor/NSC vendors' progress payments including instruction on progress substantiation document preparation by sub-contractors and vendors.

• Responsible for site implementation of safety standards to comply with IMS safe work methods.

• Responsible for attendance at daily site coordination meetings and providing detailed coordination with subcontractors.