Total 13,259 job vacancies in Singapore

JOB DESCRIPTION

• Understand the product requirements, study relevant standards and specifications, propose innovative ideas, and develop detailed hardware architectural specifications 
• Develop Signal Processing algorithms for communication products
• Define design specifications for complex hardware blocks and accelerators, in close collaboration with the digital design engineers for power, performance and timing requirements
• Provide technical leadership throughout the development, working closely and assisting designers, verification and system validation engineers, providing solutions and promptly resolving issues during the development of the SOC
• Reviewing verification and validation plans for the design verification and system teams, identifying gaps, helping to debug issues in the pre and post silicon platforms, and ensuring strict conformance with standards and specifications
• Understand the design specifications of existing hardware modules, identifying areas of improvements, communicating with the team and making architectural and design enhancements

JOB REQUIREMENTS

• Bachelor's or Master's Degree in Electrical engineering or computer science
• Proven ability to thrive in a small, agile engineering team, taking initiative, prioritizing tasks and handle evolving technical challenges, with a strong sense of ownership and accountability from design through validation and delivery.
• Min 5 years of experience in SOC hardware architecture development for communication networking or switch SOC, multimedia and/or communication SOCs
• Strong understanding in chip hardware and system design and hand on experience on SOC system design projects
• Good understanding of different SOC architectures, Signal processing, interconnects (NIC/NOC), buses and  hardware/software/firmware partition
• Prior experience of driving system architecture decisions across Software/Firmware/Hardware/Design teams to build up the consensus and translate ideas into architecture specifications will be a major plus
• Prior experience in developing or validating display technologies such as MIPI DSI, CSI, Display Port or HDMI would be a major plus
• Prior experience with multimedia solutions such as image, video, mpeg; security solutions such as encryption engine, secure boot flow, or algorithm development for image processing or data compression would be a major plus
• Knowledge of embedded processor and firmware operation, processor sub-system, such as ARM cortex-A/M/R or RISC-V would be major plus
• Familiarity with interface peripherals, such as Ethernet/PCIe/I2S/ SPI/ I2C would be a plus
• Prior experience in SOC validation, emulation platforms, hardware testing and debugging, resolving customer issues, familiarity with lab equipment such as oscilloscope, logic analyser etc would certainly be an advantage
• Good communication and documentation skill, with proven experience of collaboration with architecture, software, firmware, design and validation teams
• Familiarity with Matlab, C/C++, System-C, VHDL/Verilog, Python, or relevant programming language

• Well Established Company

• Salary range: $3500 - $4500

• Working hours: Normal Working Hours

• Working location: Ang Mo Kio / Project based

• Excellent Benefits and Bonuses

Job Scope

• Coordinate and manage Mechanical & Electrical (M&E) project works to ensure timely and smooth execution
• Ensure all M&E works are carried out in accordance with approved drawings, technical specifications, and project requirements
• Plan, schedule, and monitor site activities; proactively identify and resolve technical and site issues
• Liaise with clients, consultants, and subcontractors to ensure proper coordination of M&E services
• Prepare and submit progress reports, claims, variation orders, and relevant project documentation; follow up on certifications and payments
• Monitor project progress to ensure works are completed within schedule and budget
• Ensure proper testing, commissioning, and handover of M&E systems in accordance with project specifications
• Ensure compliance with all relevant statutory regulations, codes of practice, and safety requirements
• Promote and enforce Workplace Safety and Health (WSH) standards on site
• Coordinate closely with subcontractors and their safety personnel on all safety-related matters
• Ensure proper documentation and timely handover of completed works to management or client

Requirement

• Diploma in Mechanical or Electrical Engineering, or a related field
• 2–3 years of relevant experience in M&E or construction projects

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Barry Ang Ze Xin (Reg No : R26159529)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Title: Technician / Assistant Engineer / Engineering Assistant (ID1579)
Location: Pioneer, transport pick up Island wide in Singapore
Working Hours: 4334 days 12 hours shift (Day & Night)
Salary: $2300 - $3000
Benefit: AWS, Variable Bonus

Job Description
• To specialise in processes and to perform higher level of troubleshooting and failure analysis
• Guide the technicians and operators to achieve required output and quality
• To check on the supplementary materials change to ensure they are properly done
• To assist Line Engineer to check all the control chart and checklist
• To ensure smooth production operation with production report
• To monitor, troubleshoot and improve the production daily final test yield
• To perform maintenance and troubleshooting of machinery
• Any other jobs as assigned by Manpower supervisor

Roles and Responsibilities:

As a fresh engineer, your primary responsibility will be to learn and participate in the creation of new products and enhancements to existing products from requirement to launch as part of a cross functional team involved in the development of equipment control and automation SW. You are required to design, develop, test, troubleshoot, sustain and document software changes for new requirements, enhancements to existing functionality and defects as directed by your leads.

• Perform analysis, design and implementation of assigned projects using sound engineering principles and adhering to business standards, practices, processes, and product / program requirements

• Troubleshoot variety of complex software problems

• Provide timely status updates and proactive communications on issues to the stakeholders.

• Able to interface with internal stake holders regarding software issues.

• Have the willingness to acquire in-depth understanding of domain and existing products (beyond software) and apply that knowledge to develop new products and to deliver enhancements/ fixes for customer requirements. 

Experience, Skills and Educational Requirements:

• Bachelor of Engineering degree in Computer Science/Information Science/Electronics/Electrical/Instrumentation

• Strong C, C+ programming on Windows platforms using Microsoft technologies

• Sound knowledge of Computer Science fundamentals – data structures, algorithms, operating system concepts

• Excellent analytical skills, methodical problem-solving skills and troubleshooting skills

• Excellent communication skills (verbal and written) and the ability to interact with extended teams spread across the globe.

• Self-motivated and willing to learn new skills and technologies as needed

About the Division:

Common Systems Software Group is part of the Silicon Products Group and is responsible for Design, Development, Test and Support of Supervisory Control System Software that is used to control the Wafer Fabrication Equipment (WFE) made by Applied Materials.

Responsibilities

• Manage and support enterprise infrastructure across Windows and Linux environments
• Perform system administration tasks including health checks, patching, upgrades, and troubleshooting
• Monitor system performance and ensure high availability of infrastructure services
• Plan and execute patching activities following best practices and change management processes
• Deploy and configure servers and virtual machines to support application requirements
• Manage Active Directory, domain controllers, and core Wintel infrastructure
• Handle incident response, root cause analysis, and coordinate issue resolution with vendors
• Support system migrations, upgrades, and improvements to enhance performance and stability

Requirements

• Nitec, Higher Nitec, or Diploma in IT or related field with at least 2 years of experience in enterprise environments
• Hands-on experience with Windows servers, Active Directory, and basic Linux administration
• Familiar with patch management, system monitoring, and IT change management processes
• Exposure to virtualisation technologies (e.g. VMware, vSphere) and strong troubleshooting skills

Additional Information

• Exposure to enterprise IT environments with structured processes and systems
• Opportunity to work across infrastructure, virtualisation, and system operations

Tyson Jay Management Pte Ltd | EA License No.: 24C2479

Ivan Lim | EA Personnel No.: R1109856

[What the role is]

As a Digital Solution Engineer or Senior Digital Solution Engineer, you will play a key role in ensuring the reliability and ongoing support of both delivered and customised application systems. You will collaborate closely with business users to understand their needs and provide recommendations for application enhancements, as well as take ownership of designing and developing new functional modules and subsystems to address business requirements.

This position is hands-on, involving active engagement in investigating and troubleshooting application issues to deliver effective user support. Your will help maintain a stable and secure computing environment, while also driving improvements that enhance user experience and system functionality.

[What you will be working on]

• Conduct analysis, design, development, testing, and deployment of enhancements, new functional modules, subsystems, and bug fixes, on ITE’s Student Information System (Peoplesoft Campus Solution).
• Evaluate business requirements and provide recommendations by conducting fit gap analysis, identifying feasible alternative solutions and development of modification/enhancements of the existing modules/subsystems.
• Address issues and bugs reported by end-users, collaborating within the team to maintain the system.
• Manage task and project timelines, ensuring adherence to Government Instruction Manuals and policies.

[What we are looking for]

• Candidates should possess a background in Information Systems or a related field, ideally with at least five years of experience in systems analysis.
• Strong interpersonal, communication, analytical thinking, writing, and problem-solving abilities are required.
• Must be capable of working independently with minimal supervision.
• Good understanding of all stages of software development life cycles and structured project development methodology, including documentation skills.
• Experience with implementing and supporting PeopleSoft system, preferably in PeopleSoft Campus Solutions.
• Proficient in Oracle PeopleSoft systems techno-functional skillsets and SQL database scripting.
• Hands-on experience in developing applications with PeopleSoft technologies, e.g. PeopleTools 8.58 or above, PeopleCode, Fluid UI, SQR, Application Engine, XML Publisher, PS Queries, File Layouts, Component Interface, Integration Broker, Application Package, Approval Workflow Engine, is required.
• Experience with government procurement and familiarity with Government Instruction Manuals policy are added advantage.

about the company

My client is a specialized manufacturer in the contract manufacturing space. They are a Singapore based company and with their innovative technology, this is a great brand to join at an exciting time in their development.

about the job

• Plan, coordinate and oversee all Quality Assurance activities in the Company
• Oversee the Documentation Control function for Quality Management System
• Act as the Quality Management Representative for the Company
• Develop and implement plans to collect quality data at in-process, final inspection, test and inspection stations
• Plan and execute annual Internal Audit to ensure all quality systems and procedures are effectively implemented and auditable at all times
• Develop and implement system for receipt and processing of complaints and recall of products
• Participate in all new Projects, including giving inputs from quality perspectives, performing PFMEA etc

job requirement

• Degree in Engineering or equivalent
• Manufacturing background from plastics injection medtech manufacturing environment
• Must possess ISO13485 certification

If you are interested in the position

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Our client, a well-known manufacturing company, is looking for candidates for the position of Associate Engineer.

Working Location: Jurong East

Working Hours: Monday - Friday, 8.30 am - 5.30 pm

Salary: S$ 3,200 Basic Salary + S$ 300 Performance Allowance

Responsibilities:

• Supporting the production line

• Ensuring the machines are running smoothly

• Basic troubleshooting and housekeeping maintenance

• Other ad-hoc duties

​​​​​​​
Requirements:

• Candidates must possess a diploma in any engineering related field
  

EA License No.: 01C4394 (PERSOL Singapore Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolsingapore.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

We are seeking a skilled Water Treatment / Reverse Osmosis (RO) Operations Technician with a minimum of 3 years of hands-on experience in water treatment plant operations. The successful candidate will be responsible for operating, monitoring, maintaining, and troubleshooting reverse osmosis systems and associated water treatment equipment to ensure safe, efficient, and reliable plant performance.

Key Responsibilities

• Operate and monitor Reverse Osmosis (RO) systems, filtration units, pumps, dosing systems, and associated water treatment equipment.
• Conduct routine inspections of plant equipment and ensure operational parameters are maintained within specification.
• Perform water quality testing and record operational data, including conductivity, pH, turbidity, flow rates, and chemical consumption.
• Carry out preventive maintenance and basic corrective maintenance on water treatment equipment.
• Troubleshoot operational issues and coordinate with maintenance teams to minimize downtime.
• Monitor chemical dosing systems and ensure safe handling and storage of treatment chemicals.
• Prepare daily operational reports, log sheets, and maintenance records.
• Ensure compliance with workplace safety, environmental, and quality standards.
• Support plant shutdowns, start-ups, and commissioning activities when required.
• Participate in emergency response and plant recovery activities as necessary.

Requirements

• Minimum 3 years of solid experience in water treatment plant operations.
• Proven experience operating and maintaining Reverse Osmosis (RO) systems.
• Familiarity with water treatment processes such as filtration, softening, UF, EDI, demineralisation, and chemical dosing systems.
• Ability to interpret P&IDs, operating manuals, and technical documentation.
• Experience conducting water quality analysis and operational monitoring.
• Basic mechanical and electrical troubleshooting skills.
• Good understanding of workplace safety requirements and permit-to-work systems.
• Ability to work independently and as part of a team.
• Willingness to work shifts, weekends, and public holidays if required.

Position: Project Engineer (ACMV)
Salary: up $6000 + Performance Bonus
Working Day: 5.5 Days (Alt Sat) (may require to work on weekends when necessary)
Working Hour: 9am - 6pm | 9am - 1pm
Working Location (office): Loyang Crescent
(may be required to be station out of office)

Job Responsibilities:

• To guarantee efficient execution, oversee all project activities, teams, and site operations.
• Effectively coordinate with subcontractors, vendors, landlords, consultants, and clients.
• Create and evaluate project safety paperwork, risk assessments, and permits.
• Assist with projects from pre-contract to completion while adhering to scope, budget, and timeline specifications.
• Examine contracts, specifications, and tenders with a particular emphasis on cost negotiation.
• Keep an eye on budget control, variation work, progress payments, and project costing.
• Create technical proposals, tender submissions, supplier quotes, and project plans.
• Attend customer and consultant meetings to discuss problems and monitor developments.
  

Qualifications & Requirements:

• At least Diploma in Electrical/Electronic or equivalent.
• Working experience in ACMV industry.

To Apply:

• You may email your resume to jj@alignrecruitment.com.sg for more information.
• Regret to inform that only shortlisted candidates will be contacted by our consultants.

Align Recruitment Pte Ltd (20C0253)
JJ Tan (Reg No. R23112681)

Salary: up to $2500
Duration: 1 year contract

Working Days & Hours: Mon-Fri Office Hours

Location: Buona Vista

Job Description:

Process and post all technical data to work request management and submission system.

Conduct all assigned work with compliance to meet our organization’s safety and quality requirements.

Perform at least 1-2 automated test methods

Plan, maintain and coordinate timely PM schedule/program for equipment to support test methods

Able to support PTL equipment in:

• Basic installation

• PM

• Basic troubleshooting

• In house calibration and validation with approved SOP’s

• Coordinate advanced/specialized calibration/troubleshooting with external vendors and PTL equipment owners.

• Notify Team Leader when there is an anomaly with the equipment

Job Requirements: Min Diploma in Sciences/Engineering or similar w min 3 years’ Maintenance Tech / Process Tech Experience from Pharma industry or biomedical service engineer

Interested candidates, please submit your resume to: allylok@recruitexpress.com.sg

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

allylok@recruitexpress.com.sg

• Support and drive project execution across engineering, procurement, manufacturing, testing, and delivery phases
• Plan, monitor, and track project schedules, deliverables, and milestones to ensure timely completion
• Act as a key point of contact for customers, vendors, and internal stakeholders to ensure smooth communication and alignment
• Interpret technical specifications, review engineering documents
• Coordinate with suppliers on material delivery, monitor vendor performance, and expedite procurement activities
• Ensure proper documentation control, submission, and approvals throughout the project lifecycle

Requirements

• Bachelor’s Degree in Mechanical Engineering, Electrical Engineering, or related discipline
• 3–5 years of relevant experience in project engineering or project execution
• Experience in oil & gas, chemical, marine, or rotating equipment industry is an advantage

Interested applicants can send their detailed resumes to janelui@recruitexpress.com.sg or call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg.No. 199601303W || EA Licence No. 99C4599

Job Title: System Application Engineer (ID3566)
Location: Boon Lay
Working Hours: Monday to Friday 9am to 6pm , Alternate Saturday 9am to 1pm
Salary up to : $4000- $5000

Job Responsibilities:
• Design and improve X-ray scan systems, including building prototypes and testing new designs.
• Write manufacturing and test procedures for equipment.
• Install, repair, and maintain equipment in the field while providing customer training as needed.
• Train manufacturing personnel on assembly and testing of products.
• Assist in integrating software with electrical control systems.
• Provide organized documentation for analysis and recommend design improvements.
• Assemble, test, and troubleshoot product designs, offering constructive feedback.
• Evaluate product performance using field data and recommend modifications or improvements.
• Travel globally for system evaluations, custom installations, and training purposes.
• Perform other duties as required.

Our vision is to transform how the world uses information to enrich life for all.
Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

Job Summary and Description:  

The TD MDE Shift Lead Engineer is responsible for coordinating and communicating the area priorities for all process development & operations for assigned areas, ensuring robust shift-level operations that support TD work. This role acts as the critical bridge between real-time shift execution and TD strategic objectives, translating priorities into actionable plans that ensure process stability, yield protection and operational excellence. The Shift lead supervises both Engineers and Technicians as well as coordinate directly with TD 1st Shift team members, HVM Shift Ops Team and multi-functional teams to deliver consistent, high-quality execution aligned to TD work responsibilities include but are not limited to:

Responsibilities :

Safety & Quality: 

• Finishes the required safety training and adheres to safety and regulatory policies

• Proactively identifies and resolves safety and quality issues with collaborators

• Drives reduction of injuries, hazards, and environmental incidents

Shift Operations

• Serves as 2nd line of defense for shift critical area issues (lot hold, disposition, excursions, line-downs, tool downs) interfacing HVM Ops team and TD 1st shift Process Development teams.

• Partners with TD 1st Shift, HVM Ops, and multi-functional teams to set priorities, resolve issues, and meet goals.

• Ensures robust reaction plans, and timely updates for shift teams

• Develops and delivers plans to resolve on shift process/tool issues, improve output, and mitigate quality risks

• Collaborate with PDE, EDE, and suppliers to maintain process/tool performance, availability, and area improvements

Process Development Support

• Leads shift team to provide process development support including but not limited to: FA/VPD Submission, Wafer Shipments, SWR execution & data collection, critical lots health check and redundancy execution etc.

• Ability to give guidance to TMs on complex tasks, issues and deliver to engineering development intent.

• Uses data-driven analysis to drive yield and quality solving on duty  and key decisions making.

• Provides technical expertise and solving complex process and equipment issues, driving root cause resolution/containment and deliver to engineering development intent.

• Ensures capacity, product mix, and improvement plans are in place to meet business needs

• Supports business processes and ensures control of chronic tool/process issues (SPC, alarms, inventory)

People Leadership and Team Development

• Drives continuous improvement in shift team performance

• Partners with leadership to align area goals and establish clear line-of-sight objectives

• Manages projects to meet scope, schedule, and deliverables; tracks actions and call outs as needed

• Leads team execution, prioritization, and effective meetings with clear follow-up actions

• Provides performance management, coaching, training and development planning for direct reports

• Manages workload and well-being of direct reports and help TM clear obstacles

• Ensures accountability, clear expectations, and timely task completion across the team

• Communicates with 1st shift MDE, PD and MDE director on priorities, deliverables and required expectations.

• Partners with 1st shift MDE team to build training plans, improve efficiency and work on strategic projects.

Requirements :

• Masters / Bachelor’s degree in Electrical / Mechanical / Chemical / Materials Engineering & 5 years of wafer fabrication industry experience

• Strong problem-solving, data analysis, and SPC/process control, yield/defect mechanism and process flow interaction knowledge

• Proficient in relevant Micron systems/tools (e.g., SPC, GerM, MES Central, SWR etc) and passion for automation/AI Agent adoption.

• Working knowledge of yield, defect mechanisms, process interactions, and GeRM risks

• Ability to lead shift teams in fast-paced environments and deliver area/department goals

• Flexible to work permanent 12 hours day shift and night shift based on business need

• Demonstrates Micron leadership behaviors and values

At PwC, we help clients build trust and reinvent so they can turn complexity into competitive advantage. We’re a tech-forward, people-empowered network with more than 364,000 people in 136 countries and 137 territories. Across audit and assurance, tax and legal, deals and consulting, we help clients build, accelerate, and sustain momentum. Find out more at www.pwc.com.

Role Overview

• We are seeking an experienced Application Maintenance Engineer to support the System for a long-term application maintenance and support engagement. The candidate will provide Level 2 and Level 3 support, ensuring the availability, stability, performance, and integrity of critical production and non-production environments.

• This role requires strong hands-on experience in the Microsoft technology stack, system integration, database support, incident/problem management, and production support operations. The candidate must be able to work onsite at the client’s office (9am-6pm) and provide onsite support during major events as required.

• In addition, the role is expected to provide end-to-end application maintenance services, including incident investigation, resolution management, and bug fixes. The position requires solid technical expertise across a broad range of technologies, including programming in .NET, data streaming with Kafka, database management with Oracle, and domain knowledge in system integration using Oracle Service Bus (OSB), as well as related technologies such as SignalR and Redis.

Required Skillsets:

• Knowledge and competency of Microsoft Technology Stack DOT.NET, C#, ASP.NET WEB API, ASP.NET MVC, MVVM, Entity Framework, LINQ, Kafka, Signal R, SSIS, SSRS.

• Knowledge and familiarity of using Microsoft Technology Stack such as SCCM, SCOM.

• Knowledge on Oracle Service Bus Message Flow, Proxy Service, Business Service, XQuery, XML, XSLT, JMS, SOAP, REST, WSDL, Adapters and concepts of SOA development.

• Knowledge and competency of MSSQL, Oracle DB from infrastructure and application perspective.

Interested applicants are invited to apply directly at the NUS Career Portal. Please note your application will only be processed if you apply via NUS Career Portal.

NUS Career Portal link: https://careers.nus.edu.sg/job/Research-Engineer-%28Data-driven-understanding-of-hydroclimate-extremes%29/33189-en_GB/

We regret that only shortlisted candidates will be notified.

Job Description

Applications are requested for Research Engineer (RE) positions on climate change, risk assessment of compound droughts and floods using the latest AI techniques in the Department of Civil and Environmental Engineering at the National University of Singapore (NUS).

The selected Research Engineer (RE) is required to work on:
•    drought and flood risk assessment under climate change.
•    land use optimization and reservoir-informed managed aquifer recharge assessment. 
•    multi-sector dynamics. 

Job Requirements

•    At least a bachelor’s degree in civil engineering, hydrology, water resources engineering, optimization, seasonal forecasting, machine learning, or from similar programs.
•    Master’s degree is preferred.
•    Extensive experience in developing complex computer codes, e.g. in Python, R, or Shell.
•    Ability to construct and write papers for leading research journals and conferences. 
•    Good written and spoken communication.
•    Open to fixed-term contract. 

Interested applicants are invited to apply directly at the NUS Career Portal. Please note your application will only be processed if you apply via NUS Career Portal.

NUS Career Portal link: https://careers.nus.edu.sg/job/Research-Engineer-%28Data-driven-understanding-of-hydroclimate-extremes%29/33190-en_GB/

We regret that only shortlisted candidates will be notified.

Job Description

Applications are requested for Research Engineer (RE) positions on climate change, risk assessment of compound droughts and floods using the latest AI techniques in the Department of Civil and Environmental Engineering at the National University of Singapore (NUS).

The selected Research Engineer (RE) is required to work on:
•    drought and flood risk assessment under climate change.
•    land use optimization and reservoir-informed managed aquifer recharge assessment. 
•    multi-sector dynamics. 

Job Requirements

•    At least a bachelor’s degree in civil engineering, hydrology, water resources engineering, optimization, seasonal forecasting, machine learning, or from similar programs.
•    Master’s degree is preferred.
•    Extensive experience in developing complex computer codes, e.g. in Python, R, or Shell.
•    Ability to construct and write papers for leading research journals and conferences. 
•    Good written and spoken communication.
•    Open to fixed-term contract. 

Civil Engineer
Salary: $2500 - $4000
Working hours: 5.5 days, Mon - Fri 8.30am - 6pm | Sat 8.30am - 12pm
Location: Within central area [1 – 2 sites]

Roles & Responsibilities

• Responsible for overall project management and coordination to new and existing projects with the proper monitoring of manpower allocation, project requirement and attendance of meeting, etc.
• Prepare, discuss and report project schedule, cash flow, budget, etc. with the management.
• Track and report weekly on project(s) completion.
• Track and forecast on monthly project revenue and expenses, etc and other key project metrics.
• Outline and determine project roles of team members based on respective project requirement, timeframe and budget.
• Outline and determine resource requirement (including staffing, software, hardware, equipment and facilities) of respective projects, based on project specification and requirement.
• Continually seeks opportunities to increase customer satisfaction and strengthen client relationships.
• Communicates effectively with clients to identify needs and evaluate alternative business solutions.
• Leads the respective project team to prioritize signed off project works based on analysis of strategic importance, tasks outstanding, obstacles or barriers, budget resources and deadlines.
• Establish and well documented and communicated schedule for all phases of project(s).

Requirements:

• Degree in Civil & Structural Engineering or its equivalent
• At least 3 years of relevant experience

Email: supreme.jacksontan@gmail.com

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

JOB DESCRIPTION

· Discussion with system engineers on IP requirement and micro architecture.

· Develop IP (control path intensive or data path intensive) meet functional requirement and protocol standard.

· Support SoC designer on integration, timing constraints and power domain setting.

· Support IP verification for verification plan review, test case debugging.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience in IP development (either control path intensive or data path intensive)

· Knowledge of timing, DFT and power structure.

· Familiar with UNIX/ Linux environment and scripting

· Experience on communication IP and/or video IP development would be advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Experience on communication IP development would be an advantage

· Experience on video IP development would be an advantage

Responsibilities

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Requirements

• Degree in Electrical/Mechanical Engineering
• No experience needed, training provided

Interested candidates, please forward your resume to jalenetan@recruitexpress.com.sg

Consultant: Jalene Tan (R26160390)
Recruit Express Pte Ltd (99C4599)

Job Description

• Industry/ Organization Type: Ground Engineering
• Position Title: Reinforced Concrete (RC) Engineer
• Working Location: Islandwide (Office located near City Hall MRT)
• Working Hours: 5.5 days, (Monday – Friday, 9 AM – 6 PM; Saturday, 9 AM – 1 PM) or 5 days + Alt Saturday (9 AM – 6 PM)
• Salary Package: Basic Salary + AWS + Allowances + Variable bonus
• Duration: Permanent Role

Key Responsibilities

• Oversee and coordinate all reinforced concrete (RC) works for tunnelling, including base slabs, tunnel walls, linings, and shafts.
• Plan and manage concrete casting activities, ensuring proper sequencing and efficient use of resources.
• Prepare and follow up on Requests for Inspection (RFI) and coordinate inspections with consultants and relevant authorities.
• Conduct and support site inspections for reinforcement, formwork, and concrete works.
• Monitor site progress and update progress reports to ensure alignment with the master schedule.
• Ensure all RC works meet design specifications and quality management requirements.
• Work closely with site supervisors, subcontractors, and QA/QC teams to resolve site issues promptly.
• Coordinate with planning and procurement teams to ensure timely delivery of materials and equipment.
• Maintain accurate records of inspections, casting activities, and technical submissions

APPLY NOW!!!

• Bachelor’s Degree in Civil or Structural Engineering, or an equivalent qualification.
• 2–5 years of relevant experience in reinforced concrete works.
• Good knowledge of concrete works, formwork systems, reinforcement detailing, and casting sequences for LTA projects.
• Able to read and understand structural drawings and technical specifications.
• Familiar with site documentation such as RFIs, inspection checklists, method statements, and progress reports.
• Able to work independently and perform effectively in a fast-paced site environment.
• Strong communication and coordination skills when working with project teams and consultants.
• Experience in infrastructure projects will be an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #82738 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

JOB DESCRIPTION

· Work with system engineers on timing requirements and feedback on optimization.

· Work on SoC timing constraint, synthesis and timing closure.

· Work on power structure, eg. Isolation of power domains, level-shifter crossing voltage domains

· Conduct formal verification for release comparison.

· Support back-end implementation on timing violation analysis and fix.

· Support scan insertion and optimization.

· Support on power structure and power optimization.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Familiar with ASIC design flow

· Experience in logic synthesis, static timing analysis, timing closure

· Good understanding of DFT and Power structure.

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

JOB DESCRIPTION

· Discussion with system engineers on SoC architecture and feedback on optimization.

· Work on SoC integration; system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;

· Discussion with synthesis engineer and back-end engineer on design optimization.

· SoC DFT support;

· SoC verification plan and SoC verification support

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Knowledge of ASIC design flow

· Experience in RTL coding, RTL and gate-level debug

· Understanding of DFT, timing and power requirements

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Knowledge on mixed-signal design would be an advantage.

We are looking for junior ~ intermediate Software Development/Support Engineer to look after the exchange’s mission critical business systems; oversee daily operations and develop system enhancements as a second line support. This role also requires working closely with business users to analyse business requirements, design and see through implementation.

Professional Requirements:

• Exposure to full software development life cycle of large scale financial system
• 2+ years development experience against at least one of the programming languages below: Java, JavaScript or Python.
• Proficient with object oriented programming concepts and relational database design.
• Knowledge of network, understanding mainstream network communication protocols such as HTTP, TCP and UDP
• Experience with Linux, strong shell scripting skill is preferred
• IT Experiences in financial industry will be an advantage
• Good verbal and written communication capabilities, strong documentation skill

Qualifications:

• University degree in Computer Science, Mathematics, Physics or Engineering
• Passionate, self-motivated with good interpersonal skills
• Hard-working and able to work under pressure to meet tight deadlines
• Proficiency in Mandarin advantageous to liaise with Chinese counterparties
• Able to work flexible shifts and on public holidays

• Main Contractor
• Up to $7,000 (depending on experience)
• Building projects experience
• Multiple positions available

Responsibilities:

• Supervise site installation of M&E systems according to approved drawings and technical specifications.
• Monitor progress and quality of M&E works to ensure timely completion.
• Coordinate with consultants, main contractor, and subcontractors for design clarifications and site issues.
• Conduct inspections and testing of mechanical and electrical systems (T&C).
• Support the project manager in M&E planning, procurement, and reporting.
• Manage progress claims, variation orders, and documentation related to M&E works.

Requirements:

• Degree in Mechanical or Electrical Engineering.
• At least 3 years of M&E project/site experience.
• Good knowledge of local codes and safety practices.
• Strong communication and coordination skills.

HOW TO APPLY:

If you are a team player, meticulous & organized, and more importantly, believe that YOU CAN MAKE A DIFFERENCE, we would like to hear from you.

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: R1875905) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9958 or 9271 7510 for a confidential discussion.

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.