Job Description:

• In charge of designing the PCB layout of electronic circuit boards and generate Gerber files for PCB fabrication.
• Responsible in research and define efficient and reliable architecture to fulfil electronic circuit board requirements for the company drone systems.
• In charge of firmware programming in embedded C/C++ language.
• In charge of testing PCB assemblies thoroughly and ensure they operate as expected.
• Responsible in sourcing suitable electronic components to implement the design architecture.
• In charge of studying datasheets of the electronic components and design the schematic of electronic circuit boards that can fulfil the requirements.
• Responsible in generateing documents and drawings of design and test.

Job Requirement:

• Minimum Degree in Mechanical/ Electrical/ Aerospace/ Mechatronics Engineering or relevant
• Minimum 3 years of working experience in electronic hardware and firmware design
• Experience in analog and digital circuit design with experience in designing electronic circuits with microcontrollers, digital signal processors (DSP), field programmable gate arrays (FPGAs), etc
• Proficient in schematic and PCB design tools such as Altium Designer, OrCAD Capture and PCB Designer, Autodesk EAGLE, etc and using instruments such as multimeters, oscilloscopes, logic analysers, etc. to troubleshoot issues on electronic circuit boards.
• Proficient in C/C++ programming language.
• Knowledge in various communication buses and protocols such as UART, I2C, SPI, CAN, Ethernet, etc.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of ensuring the implementation of Lean/Continuous Improvement tools & Lean projects in the company
• Responsible for expanding and sustaining the lean deployment efforts through facilitating Value Stream Mapping (VSM), Kaizen and Continuous Improvement events
• In charge of identifying, deployment and driving successful completion of Lean projects/initiatives
• In charge of leading Continuous Improvement initiatives and managing the efficiently the sharing of best practices among departments

Job Requirement:

• Minimum Degree in Aersopace Engineering or relevant
• Minimum 5 years of working experience in driving continous improvement projects
• Experience in Lean Six Sigma Green/Black Belt, JIRA, Power BI, VBA and Macros will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Metal Casting Process

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in Supplier Quality/ Audit
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Responsibilities:

·       Responsible for managing a team of M&ECoordinators and BIM Modellers in the design and coordination works

·       Attend project meetings and establish businessrelationship with the clients, consultants and contractors.

·       Coordinate closely with the project team members onconstruction activities, including site logistic, building management, and submissionsto relevant authorities.

·       Liaise with the M&E sub Contractors on co-ordinationand installation, testing and commissioning

·       Monitor site progress, ensure compliance withspecifications, and maintain quality standards

·       Support project documentation, including shop drawings,method statements, and as-built drawings

Requirements:

• Degree in Mechanical or Electrical Engineering (recognized by Singapore PE Board)
• Minimum 5 years of experience in construction industry
• Proficient in BIM and AutoCAD

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Degree in Mechanical/Manufacturing/Aeronautical Engineering or equivalent.
• Minimum 3 years of working experience in MRO industry
• Knowledge of special processes such as Weldng (TIG/EBW), Thermal Spray, Heat Treatment, Machining will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities

• Manage customer complaints, corrective and preventive action programs.
• Work closely with customers, production and suppliers to meet the quality requirements.
• Review and prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
• Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Responsible for product quality management, implement quality plans, drive quality improvement projects and prepare quality report to identify problem areas and work on problem resolutions
• Interface with and handle customers/vendors on quality issues.
• Handle the customer quality/customer satisfaction issues for global and major customers, which include monitoring field complaints, coordinating investigation and following up within the business to ensure appropriate closure in a timely fashion.
• Assume the focal role for investigating high failure rate customer issues, coordinating the use of different resources to investigate the customer issues.
• Lead the internal team members in achieving the ISO9001:2015 accredited certification as well as customer-specific qualifications.
• Work closely with internal team members and external suppliers to address product-related quality issues, and drive corrective and preventive actions for continuous improvement.
• Lead the quality effort to identify key process and quality improvement in nonconformances (NCR) and rejects.
• Managing and monitoring to ensure organization compliance with Trade, Environmental Health and Safety requirement.
• Perform other duties as requested by management .

Requirement

• Min Diploma in Electrical Engineering, Mechanical Engineering or relevant
• Min 3 years of experience in Manufacturing/EMS/Semiconductor industry
• Knowledge in 5S, PFMECA, SPC & ISO 9000 series Quality system.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. e regWret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• In charge of managing and supporting planning and procurement of medical, non-medical equipment, and furniture
• Plan and lead user workgroups by organising regular meeting sessions, setting goals and targets, facilitating useful and productive discussions, guiding user departments, as well as reviewing performance indicators and work plans
• Responsible for budgetary planning and control, ensuring that the development keeps within budget
• Work closely with user department and various stakeholders in the preparation of medical, non-medical equipment and furniture specifications for tenders
  Provide recommendation to users based on technical compliance of medical, non-medical equipment and furniture in tender submissions
• Attach to Group team to familiarise with Group BME policies and procedures through supporting the daily operations to align with organisation and regulatory requirements
• Liaise and manage external contractors on service and tender commitment issues Provide technical advisory to end users and senior management on medical, non-medical equipment and furniture related issues
• Perform any other duties as assigned

Requirements

• Min Degree in Electronics or relevant Engineering course
• Min 3 years of experience in service and maintenance of medical equipment.
• Experience in Healthcare/Hospitals

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities

• Oversee the organization’s IT infrastructure, ensuring optimal performance, security, and reliability of servers, network and security systems, as well as cloud services.
• Design, implement, and maintain the IT infrastructure of the organization.
• Maintain Windows servers, virtualization platforms, and storage solutions.
• Manage Active Directory, DNS, DHCP, and Group Policy.
• Ensure high availability and disaster recovery with backups and replication.
• Monitor system performance, troubleshoot issues, and apply patches and updates.
• Implement network design, configure, and maintain LAN, WLAN, and VPN infrastructure, managing firewalls, switches, and routers.
• Implement and monitor network security policies, intrusion detection, and access control.
• Optimize network performance, troubleshoot connectivity issues, and ensure redundancy.
• Implement cybersecurity best practices, monitor threats, and manage endpoint protection and vulnerability assessments.
• Ensure compliance with regulations.
• Conduct security audits and enforce policies on user access, encryption, and authentication.
• Create and maintain network documentation, including network diagrams, configurations, and procedures.
• Carry out any other tasks assigned by the management

Requirement

• Min Degree in Information Technology or relevant
• Min 5 years of experience in providing Network, System and Cybersecurity operational support.
• Experience with servers, network and security devices, firewall, switches, routers, load balancers and wireless solutions.
• Certifications in CCNA/ CCNP/ CCIE/ Microsoft certified Azure Solutions Architect and/or Windows Server Administrator, CISSP, CISM and CompTIA Security will be required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities

• Oversee the organization’s IT infrastructure, ensuring optimal performance, security, and reliability of servers, network and security systems, as well as cloud services.
• Design, implement, and maintain the IT infrastructure of the organization.
• Maintain Windows servers, virtualization platforms, and storage solutions.
• Manage Active Directory, DNS, DHCP, and Group Policy.
• Ensure high availability and disaster recovery with backups and replication.
• Monitor system performance, troubleshoot issues, and apply patches and updates.
• Implement network design, configure, and maintain LAN, WLAN, and VPN infrastructure, managing firewalls, switches, and routers.
• Implement and monitor network security policies, intrusion detection, and access control.
• Optimize network performance, troubleshoot connectivity issues, and ensure redundancy.
• Implement cybersecurity best practices, monitor threats, and manage endpoint protection and vulnerability assessments.
• Ensure compliance with regulations.
• Conduct security audits and enforce policies on user access, encryption, and authentication.
• Create and maintain network documentation, including network diagrams, configurations, and procedures.
• Carry out any other tasks assigned by the management

Requirement

• Min Degree in Information Technology or relevant
• Min 5 years of experience in providing Network, System and Cybersecurity operational support.
• Experience with servers, network and security devices, firewall, switches, routers, load balancers and wireless solutions.
• Certifications in CCNA/ CCNP/ CCIE/ Microsoft certified Azure Solutions Architect and/or Windows Server Administrator, CISSP, CISM and CompTIA Security will be required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

• Perform process setup and buyoff for both Drive Backend Assembly, ensuring that yield, cycle time, and quality outcomes meet defined targets
• Support product ID label buyoff to ensure compliance with product specifications and standards• Monitor production yield to detect any excursions, conduct process mapping, and implement immediate containment (stop bleeding)
• Establish hypotheses, design experiments to identify root causes, propose corrective actions, and report findings to engineers
• Escalate process and technical issues appropriately per PMP requirements
• Conduct basic data queries and analysis to provide relevant information and insights for engineering teams
• Ensure process sustainability by monitoring KPIVs/KPOVs and managing Fast Triggering systems to maintain stable and controlled operations
• Lead or participate in continuous improvement projects aimed at enhancing production efficiency in a consistent and sustainable manner
• Perform additional tasks and responsibilities as assigned to support team, department, and company Objectives and Key Results (OKRs)

Requirements:

• Diploma in Engineering and related disciplines
• Strong data querying and analytical capabilities
• Proficient in English with strong verbal and written communication skills
• Able to perform effectively under pressure and meet deadlines
• Demonstrates strong resilience, adaptability, and positive work attitude

To submit your application, please apply online to apply@rn-care.com or call +65 6514 9838 for a private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Assistant Mechanical Engineer

We are a dynamic engineering-driven company focused on delivering innovative and high-quality solutions. Join a collaborative team where creativity, precision, and continuous improvement are highly valued.

• SGD 3,500 + AWS + Variable Bonus
• Annual Flexible Benefit of $850
• 5-day work week, Monday to Friday, 9:00AM – 6:30PM
• Tampines North, Singapore

Job Responsibilities

As an Assistant Mechanical Engineer, you will be involved in the design, development, and support of mechanical components and assemblies.

Your responsibilities include:

• Creating detailed 2D drawings and 3D models using SolidWorks based on engineering requirements
• Preparing manufacturing drawings including GD&T, tolerances, BOM, and material specifications
• Collaborating with stakeholders, project managers, and cross-functional teams to ensure design feasibility and compliance
• Maintaining CAD data, drawing revisions, and technical documentation
• Supporting prototyping, testing, and production with accurate technical drawings
• Assisting in troubleshooting design issues and improving product performance
• Providing hands-on support for prototype builds, assembly checks, and part validation

Requirements

• Diploma in Mechanical Engineering or related discipline
• 1 year of relevant experience
• Proficient in SolidWorks and CAD software (2D & 3D)
• Strong understanding of mechanical design and technical drawings
• Detail-oriented, proactive, and willing to be hands-on in engineering tasks

Join Our Team

If you are passionate about mechanical design and eager to grow your engineering career in a hands-on environment, we welcome your application.

Technical Sales Engineer (Ultra High Purity)

We are a global engineering company supporting the semiconductor industry with Ultra High Purity (UHP) equipment solutions. As part of our continued expansion in the semiconductor sector, we are looking for driven individuals to help grow our regional and international business footprint.

• S$4,000 – S$6,000 + Variable Bonus
• Dynamic Hunter-Farmer (50/50) business development role
• 10 Ubi Crescent
• Monday to Friday, 9:00AM – 6:00PM
• Exposure to global semiconductor customers and EPC networks
• Opportunities to attend industry exhibitions and expand market reach
• Strong career growth in a fast-expanding technical sales environment

Job Responsibilities

As a Business Development Engineer, you will play a key role in driving growth and strengthening customer relationships within the semiconductor UHP sector.

Your responsibilities include:

Business Development & Sales Growth

• Maintain and strengthen relationships with existing customers
• Identify and develop new business opportunities within assigned territories
• Proactively engage prospective customers to generate new sales opportunities
• Attend exhibitions and industry events to build market presence

Technical & Commercial Engagement

• Lead technical discussions with customers and support product definition activities
• Monitor project tenders and participate in commercial negotiations
• Analyse market opportunities and competitive landscape
• Provide feedback to regional and HQ teams for product and business strategy development

Customer & Project Coordination

• Coordinate with customers, internal teams, and factories to ensure smooth execution
• Ensure high customer satisfaction in quality, delivery, and after-sales support
• Act as the key liaison between technical and commercial stakeholders

Requirements

• Degree in Engineering or related discipline
• 2–3 years of experience in UHP (Ultra High Purity) applications within the semiconductor industry
• Strong sales-driven mindset with proven business development experience
• Established network with semiconductor EPC companies and end users preferred

Join Our Team

If you are a motivated and commercially driven engineer looking to grow in the semiconductor UHP industry, we welcome you to join our expanding team.

Job Description

• Industry/ Organization Type: M&E Consultancy Firm
• Position Title: Mechanical Design Engineer/Project Engineer (Building and Infrastructure)
• Working Location: East – Paya Lebar
• Working Hours: 5 days (Mon-Fri: 8.30 am - 6 pm)
• Salary Package: Up to SGD 5500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Build relationships with clients and contractors from other organizations
• Carry out duties in accordance with company procedures and implement prescribed systems of work
• Understand design philosophy/design fundamentals and communicate engineering solutions to project stakeholders
• Perform engineering calculations with the aid of engineering software such as Computational Fluid Dynamics (CFD), Full Hydraulic Calculation (FHC)
• Familiar with Architect, Structural/Service Engineers drawings/specifications
• Carry out investigative and technical review works
• Responsible for the development and production of drawings/calculations/specifications /reports
• Set an example for placement of students and junior engineers

APPLY NOW!!!

• Min Diploma in Mechanical Engineering
• Min. 1 year of working experience in the consultancy firm in the design of ACMV, fire, and hydraulic services
• Experience as a Contractor in project execution will be considered
• Experience in Energy Storage System (ESS) / Capability in carbon, sustainability, resources conservation, and renewables will be an added advantage
• Carry out tasks and duties assigned in a positive and dignified manner

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #74684 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

If you are passionate about playing a key role in the success of a Top notch MNC, we want to hear from you!

Our client is a well-established brand in the Information Technology and Services Domain who is now looking for a passionate and driven Software Engineer. This is an amazing opportunity for individuals who want their career in new technology with a global multinational organization.

ABOUT THE ROLE

We are looking for enthusiastic and motivated fresh graduates or junior IT professionals to join our team. This is an excellent opportunity for candidates who are passionate about technology and eager to build a career in Oracle and Talend. No prior experience with Oracle or Talend is required, as comprehensive training will be provided.

ROLES AND RESPONSIBILITIES

• Shortlisted candidates would be sent for 2 months exclusive training in Oracle & Talend.
• On completion of classroom training, selected candidates will be placed on the software/application development team of our ongoing project at our MNC client, where they will receive On-The-Job Training (OJT) on various aspects of Software Development Life Cycle.

REQUIREMENTS

• Fresh graduates or candidates with 0–2 years of IT experience.
• Diploma or Bachelor's degree in Computer Science, Information Technology, Software Engineering, Computer Engineering, or a related discipline.
• Knowledge of at least one programming language (e.g., Java, Python, C#, C++, JavaScript, or similar).
• Basic understanding of SQL or databases is an advantage but not mandatory.
• Strong analytical, problem-solving, and communication skills.
• Eagerness to learn new technologies and work in a collaborative environment.

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression

To submit your application, please email your UPDATED CV in Microsoft Word format to saridha@aven-sys.com and keerthana@aven-sys.com. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name : Saridha Sekar

Reg No. : R1325954

Avensys Consulting Pte Ltd
EA Licence 12C5759

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' personal information and privacy policy.

Job Description

• Industry/ Organization Type: Construction/ Ground Engineering
• Position Title: Engineer (Pipe Roofing)
• Working Location: Ang Mo Kio
• Working Hours: Permanent 12 hours Night Shift (7.30pm – 7.30am)
• Salary Package: Basic Salary + Allowances + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Primarily support night shift operations during pipe roofing works.
• Take charge of shift operations on site, acting as the representative of the main contractor.
• Report directly to the Senior Engineer overseeing the designated work area during pipe roofing activities.
• Supervise subcontractors to ensure compliance with all project procedures, safety standards, and work requirements.
• Monitor site activities to ensure works are carried out according to approved plans and specifications.
• Coordinate with site teams to maintain smooth workflow and timely progress of works.

APPLY NOW!!!

• Diploma/ Degree in Civil Engineering, or a related field.
• At least 2 years of relevant experience in LTA projects, preferably in rail-related works.
• Have proven experience in pipe roofing with micro tunnelling machine.
• Willingness to work night shifts.
• Strong communication and interpersonal abilities.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #83713 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Civil Engineer

• Location: within central area [1 – 2 sites]
• Salary: $2500 - $4000
• Working hours: 5.5 days mon - fri 8.30am - 6pm | Sat 830am - 12pm

Roles & Responsibilities

• Responsible for overall project management and coordination to new and existing projects with the proper monitoring of manpower allocation, project requirement and attendance of meeting, etc.
• Prepare, discuss and report project schedule, cash flow, budget, etc. with the management.
• Track and report weekly on project(s) completion.
• Track and forecast on monthly project revenue and expenses, etc and other key project metrics.
• Outline and determine project roles of team members based on respective project requirement, timeframe and budget.
• Outline and determine resource requirement (including staffing, software, hardware, equipment and facilities) of respective projects, based on project specification and requirement.
• Continually seeks opportunities to increase customer satisfaction and strengthen client relationships.
• Communicates effectively with clients to identify needs and evaluate alternative business solutions.
• Leads the respective project team to prioritize signed off project works based on analysis of strategic importance, tasks outstanding, obstacles or barriers, budget resources and deadlines.
• Establish and well documented and communicated schedule for all phases of project(s).

Requirements:

• Degree in Civil & Structural Engineering or its equivalent
• At least 3 years of relevant experience