Total 15,772 job vacancies in Singapore

Key Responsibilities

• Provide Level 2/3 support for network infrastructure across data centers, remote branches, and overseas locations.
• Install, configure, and troubleshoot Cisco routers, switches (Nexus, 2960, 3750), and firewalls (Checkpoint, Juniper).
• Manage and support routing protocols including RIP, EIGRP, OSPF, BGP, and HSRP.
• Perform network health checks, DR drills, and ISDN testing for business continuity.
• Coordinate with vendors for SSOE deployments, hardware replacements, and RMA processes.
• Monitor and maintain WAN links using tools like SolarWinds, NetBrain, Riverbed, Algosec, and IBM ISM Service Desk.
• Support and troubleshoot VPNs, VLANs, and public cloud connectivity.
• Generate and maintain documentation for network changes, incident reports, and monthly performance metrics.
• Collaborate with cross-functional teams to resolve network-related issues and implement infrastructure upgrades.
• Ensure compliance with SLA and IT security policies.

Technical Skills & Tools:

• Networking: Cisco (CCNP certified), Nexus, RIP, EIGRP, OSPF, BGP, HSRP, STP, VLAN, VPN
• Firewalls: Checkpoint, Juniper
• Servers: Windows Server 2008/2003, Active Directory, FTP, DNS, DHCP, Backup Server
• Monitoring & Ticketing Tools: SolarWinds, NetBrain, Riverbed, IBM ISM, Ichamp, JIRA, CA Spectrum
• Others: Lotus Notes, Blackberry configuration, SSL VPN, Symantec Endpoint Antivirus

Required Skills & Experience:

·      Bachelor Degree in relevant field (e.g.,Computer Science, Information Technology, Engineering).

·      10+ years of experience

·      Willingness to participate in 24x7 supportrotations and on-site activities.

·      Excellent communication and documentationabilities.

·      Strong analytical and troubleshooting skills.

EA License No.: 96C4864

Reg No.: R25128798 HUANG QIMENG

• Ensure the Contractor is delivering high-quality work and maintaining good safety practices in accordance with statutory requirements.
• Attend all meetings related to the project including site, progress, variation, coordination, QAQC etc
• Provide ongoing supervision for the construction of civil and structural works as needed, ensuring compliance with the project specifications, construction drawings, and the Building Control Act and Regulations.
• Carry out supervision and inspection C&S, M&E and geotechnical works including but not limited to concreting, pavement, drainage, compaction, curing of concrete, formwork, re-props and removal of props, quality & erection of precast components and steel works.
• Manage and supervise the Resident Technical Officers under his charge.
• Coordinate with safety team and provide overview of WASH and aerodrome safety management systems and implementation of safe working practices on site.
• Ensure all construction works will not impact or affect the operations of the client.
• Ensure client’s emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• Verify all reports and claims relating to C&S, M&E and geotechnical works submitted by the contractors.
• Inspect the quality of work and materials delivered to the site, take corrective actions for any non-compliance, and report any materials that do not conform to the specifications to the OIC.
• Verify reports and claims submitted by the main contractors and other ancillary contractors.
• Resolve main contractors’ queries and coordinate the works onsite.
• Adhere to the shift duty roster assigned.
• Undertake any other duties including administrative tasks related to the project as and when instructed by the SRE, OIC, or the Client.

Requirements:

• Min 8 years of civil engineering experience of which at least 3 years shall be in supervision of

1. major construction works deep excavation, drainage, pipe jacking, ground improvement, flexible/rigid aircraft pavement, supervising & installation of monitoring instruments and collating of monitoring data.

2. Viaduct, road/expressway works, geotechnical and deep excavation works

• Degree in Civil Engineering recognized by PEB.
• Accredited as a RE with IES
• Able to perform shift work.
• Must have Airport flexible and rigid pavement experience for airport project

Job Summary

Responsible for the administration, maintenance, and continuous improvement of the IBM Maximo system. This role ensures the accuracy, integrity, and accessibility of master data required for work order management and routine operations. The incumbent will collaborate with cross-functional teams to manage Maximo-related activities, maintain compliance with company and regulatory requirements, and support system enhancements and audit readiness.

Key Responsibilities

• Create, update, and maintain asset records (e.g., equipment, instruments, and facilities) throughout the asset lifecycle, from commissioning and maintenance to decommissioning and retirement.

• Ensure the accuracy and completeness of master data, including preventive maintenance frequencies, schedules, job plans, and work instructions within the Maximo system.

• Perform accurate and timely data entry to support new asset creation, maintenance activities, and ongoing operational requirements.

• Maintain data integrity and ensure all activities are performed in accordance with approved procedures, workflows, and compliance requirements.

• Provide user support and guidance on Maximo processes, workflows, and best practices.

• Participate in system upgrades, enhancements, and validation activities as a user acceptance tester (UAT).

• Develop, update, and maintain user guides, standard operating procedures (SOPs), and training materials in collaboration with Maximo administrators across other sites.

• Foster effective communication and collaboration with internal stakeholders to ensure smooth system operation and data consistency.

• Ensure compliance with applicable industry standards, company policies, quality requirements, and regulatory guidelines.

• Support internal and external audits by preparing and providing required documentation, records, and system information.

• Perform additional Maximo-related duties and projects as assigned by the Compliance and Qualification Lead.

Requirements

• Strong knowledge of IBM Maximo administration and asset management processes
• High attention to detail with a focus on data accuracy and integrity.
• Good understanding of preventive maintenance programs and asset lifecycle management.
• Strong communication and stakeholder management skills.
• Ability to work effectively across multiple departments and functional teams.
• Knowledge of GMP, quality systems, and compliance requirements is an advantage.

GMP Technologies (S) Pte Ltd | EA License 11C3793 | EA Personnel: Novita Widjaja |Registration No: R22105960

We have an opportunity to impact your career and provide an adventure where you can push the limits of what's possible.

As a Lead Software Engineer at JPMorganChase within the Commercial and Investment Bank, you are an integral part of an agile team that works to enhance, build, and deliver trusted market-leading technology products in a secure, stable, and scalable way. As a core technical contributor, you are responsible for conducting critical technology solutions across multiple technical areas within various business functions in support of the firm’s business objectives.

Job Responsibilities

• Design and implement an Option Market Making and Volatility execution platform across the trading stack

• Develop and optimize performance-critical C++ (C++17/20) components with low-latency focus

• Build low-latency, high-throughput systems handling real-time market data and order flow

• Design and implement trading controls and risk management safeguards within the execution platform

• Execute creative software solutions, system design, development, and technical troubleshooting beyond routine approaches

• Develop secure, high-quality production code; review, debug, and raise code quality across the team

• Collaborate with quantitative researchers and traders to translate strategies into resilient production systems

• Write robust, well-tested code for high-availability production environments; improve operational stability

• Drive architecture decisions and technical improvements (performance, resiliency, scalability, maintainability)

• Drives team adoption of enterprise-authorized AI-assisted engineering practices within the work environment to improve code quality, delivery speed, and operational outcomes (e.g., AI-assisted code review/refactoring, test strategy acceleration, incident/root-cause analysis support), while establishing consistent validation standards (secure coding, peer review, automated testing) and promoting reuse of effective patterns across the team.

• Applies knowledge of tools within the Software Development Life Cycle toolchain, including enterprise-authorized AI-assisted development and automation capabilities, to improve the value realized by automation.

Required qualifications, capabilities, and skills

• Bachelor’s degree in Computer Science, Engineering, Mathematics, or related discipline

• Formal training or certification on software engineering concepts and 5+ years applied experience on software engineering and building trading systems

• Expert proficiency in modern C++ (C++17/20) in performance-critical production systems

• Strong low-latency optimization skills (memory management, data structures, Linux systems programming)

• Experience with TCP/UDP socket programming and real-time messaging architectures

• Ability to design and troubleshoot distributed systems with high-availability requirements

• Hands-on practical experience delivering system design, application development, testing, and operational stability; proficient across SDLC

• Proficient with build tools, configuration management, and continuous integration environments; advanced understanding of agile/CI/CD, resiliency, and security

• Demonstrated experience leading effective use of approved AI-assisted software development tools (e.g., for coding, code review, test acceleration, troubleshooting) with the ability to set team expectations for validating AI outputs for correctness, performance, and security.

• Strong understanding of responsible AI use in engineering workflows, including data sensitivity considerations, secure handling of inputs/outputs, and adherence to resiliency and security expectations; experience coaching engineers on safe, compliant adoption within delivery practices

Preferred qualifications, capabilities, and skills

• Knowledge of options, derivatives pricing, Greeks, and market making strategies

• Experience building market data feed handlers and/or order management systems

• Familiarity with exchange connectivity protocols (FIX, native/binary protocols)

• Experience mentoring and developing engineers in a trading technology environment

To apply for this position, please use the following URL:

https://ars2.equest.com/?response_id=1ad2c041645cc07baa832672d784b818

Executive Summary

Smart IMS Inc provides Digital technology & Cloud transformation services, Application & Infrastructure Management Services, Unified Communications, and Insurance implementation services to customers across the Americas, Europe, Middle East, and Asia-Pacific regions. As the trusted technology and business partner of leading MNCs, including Global Investment Banks, Smart IMS is also a Microsoft Gold Certified Partner, Oracle Platinum Partner and AWS MSP Partner.

We are looking to hire an IT Infrastructure Capacity Engineer to support our client in Singapore which is a leading global investment bank. He/she will support capacity management and EOL Remediation efforts in the bank.

Responsibilities:

• Support infrastructure capacity planning and lifecycle management activities across server, storage, cloud, and hosting platforms.
• Analyze infrastructure utilization trends, capacity forecasts, and growth requirements to support business initiatives and technology roadmaps.
• Coordinate hardware and infrastructure procurement activities, including gathering requirements, tracking orders, and managing delivery schedules.
• Manage End-of-Life (EOL) and End-of-Support (EOS) remediation initiatives by identifying technology risks, tracking remediation plans, and coordinating upgrade, migration, or replacement activities.
• Maintain infrastructure inventories, asset records, capacity data, and lifecycle management documentation.
• Collaborate with infrastructure engineering teams, application owners, vendors, and business stakeholders to ensure successful delivery of capacity expansion and technology refresh projects.
• Support governance, audit, compliance, and change management processes related to infrastructure capacity and lifecycle management.
• Prepare management reports, dashboards, and presentations on capacity utilization, infrastructure demand, EOL remediation progress, and operational metrics.
  

Requirements:

• Bachelor's degree in Information Technology, Computer Science, Engineering, or a related discipline.
• Experience in technology lifecycle management, hosting operations, infrastructure governance, or related functions.
• Experience supporting capacity planning / management, utilization analysis, demand forecasting, or infrastructure resource management.
• Familiarity with End-of-Life (EOL) / End-of-Support (EOS) remediation, hardware refresh programs, technology upgrades, or infrastructure migration initiatives.
• Understanding of enterprise infrastructure environments, such as servers, storage, cloud platforms, virtualization, technologies.
• Strong analytical skills with the ability to interpret infrastructure data, identify trends, and support capacity planning decisions.
• Excellent stakeholder management, communication, presentation, and reporting skills.
• Experience within the banking or financial services industry is advantageous.

• Well Established Company

• Salary range: $3500 - $4500

• Working hours: Normal Working Hours

• Working location: Ang Mo Kio / Project based

• Excellent Benefits and Bonuses

Job Scope

• Coordinate and manage Mechanical & Electrical (M&E) project works to ensure timely and smooth execution
• Ensure all M&E works are carried out in accordance with approved drawings, technical specifications, and project requirements
• Plan, schedule, and monitor site activities; proactively identify and resolve technical and site issues
• Liaise with clients, consultants, and subcontractors to ensure proper coordination of M&E services
• Prepare and submit progress reports, claims, variation orders, and relevant project documentation; follow up on certifications and payments
• Monitor project progress to ensure works are completed within schedule and budget
• Ensure proper testing, commissioning, and handover of M&E systems in accordance with project specifications
• Ensure compliance with all relevant statutory regulations, codes of practice, and safety requirements
• Promote and enforce Workplace Safety and Health (WSH) standards on site
• Coordinate closely with subcontractors and their safety personnel on all safety-related matters
• Ensure proper documentation and timely handover of completed works to management or client

Requirement

• Diploma in Mechanical or Electrical Engineering, or a related field
• 2–3 years of relevant experience in M&E or construction projects

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Barry Ang Ze Xin (Reg No : R26159529)

EA Recruitment Pte Ltd

EA License No: 21C0492

We are seeking an experienced Software Lead to drive the design and delivery of secure, scalable, and high-performing digital solutions that support public sector transformation. This role combines technical leadership, hands-on system design, and team mentorship, ensuring engineering excellence while delivering impactful outcomes. You will work closely with stakeholders and cross-functional teams to build resilient solutions that align with business objectives and public sector standards.

Key Responsibilities

• Lead, mentor, and guide software engineers to deliver high-quality digital solutions.
• Architect and develop scalable, maintainable fullstack applications and systems.
• Design, develop, and review secure, high-performance APIs.
• Promote secure coding practices and DevSecOps principles throughout the development lifecycle.
• Oversee CI/CD pipelines and integrate quality assurance into delivery workflows.
• Collaborate with business analysts, UI/UX designers, infrastructure engineers, and other stakeholders.
• Ensure cloud-native best practices for deployment, monitoring, and maintenance on AWS or Azure.
• Deliver solutions that integrate with government authentication platforms (e.g., Singpass, Corppass) and comply with public sector requirements.
• Support project planning, effort estimation, and risk management activities.
• Contribute to or lead IoT platform and device integration initiatives where applicable.

Requirements

• Minimum 6 years of hands-on software development experience, including 2–3 years in a technical leadership role.
• Strong expertise in fullstack development across frontend and backend technologies.
• Proven experience designing and developing RESTful APIs.
• Solid understanding of secure coding practices and DevSecOps methodologies.
• Proficient in cloud platforms such as AWS and/or Azure.
• Experience delivering government sector systems, including integration with government authentication services (e.g., Singpass, Corppass).
• Familiarity with Agile development and delivery practices.
• Strong communication, problem-solving, stakeholder management, and leadership skills.
• Experience with IoT integration and data processing is an added advantage.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to qianyu@talentsis.com.sg for immediate processing.

Only shortlisted candidates will be notified.

Pay Range: $2k - $2.8k (not inclusive of Variable Bonus) 

Description: Come join our team! We are looking for a responsible and compassionate individual to support our funeral operations team. If you are willing to learn, enjoy working in a meaningful service role, and meet the requirements below, feel free to apply! 

Responsibilities:

• Perform day-to-day administrative and operational duties as assigned.
• Assist in the collection and transportation of the deceased from hospitals, mortuaries, and other designated locations.
• Set up and prepare funeral wake venues, including equipment, furnishings, and ceremonial arrangements.
• Support the team in en-coffin procedures and funeral send-off processions.
• Assist with post-cremation services, including the collection of ashes and coordination of ash placement at temples, columbaria, sea burials, and other designated locations.

Requirements:

• Singapore Citizens, Singapore Permanent Residents, and Malaysians are welcome to apply.
• Physically fit and able to perform manual handling and operational duties that may involve heavy lifting and setting up equipment.
• Possess a valid Class 3 Driving Licence.
• Able to work flexible hours, including weekends, public holidays, late nights, and early mornings when required.
• Basic proficiency in Microsoft Word, Excel, and PowerPoint.
• Ability to emcee funeral services and ceremonies is an advantage.
• Strong willingness to learn and develop new skills.
• Compassionate, empathetic, and able to interact respectfully with bereaved families.
• Responsible, reliable, and able to work both independently and as part of a team.

5 days, 8.30am-6.15pm

Salary: $3500- $6000

Location: Ubi 

Company background:

Specializes in Semiconductor Backend Tooling including Die Attach Tools, Wire Bond Tools & Bond Test Tools

Job Responsibilities:

• Design and development of Semiconductor Tools and mechanical systems.
• Planning, Scheduling and Costing of Tools and Mechanical Modules
• Responsible for 3D & 2D drawings, tolerance analysis, BOM preparation.
• Working closely with Electrical, Vision and Software Engineers.
• Willing to work extended hours in critical phases of project execution.

Job Requirements:

• Diploma or Degree in Mechanical Engineering or related Technical disciplines.
• Minimum 3 years of design experiences in semiconductor tooling
• Experience with Design and Development of High-Speed Pick and Place Systems, Flip Chip Bonders, Die Attach Machines, and Lamination Machine is a definite plus
• Proficiency with CAD Software is a must.
• Experience with vision application, thermal modelling, calculation and measurement techniques would be an advantage.

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC), a joint venture between Vanguard International Semiconductor Corporation (VIS) and NXP Semiconductors (NXP) has started construction on a 300mm wafer manufacturing facility in Singapore, targets automotive, industrial, consumer, and mobile end markets.

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Responsibilities:

• Analyze business and system requirements to identify test scenarios, impacts, and quality risks across enterprise applications.
• Design, develop, and execute comprehensive test strategies covering functional, integration, regression, and user acceptance testing.
• Validate end-to-end business processes across UI, API, database, and backend systems to ensure data accuracy and system reliability.
• Prepare detailed test cases, test data, and test evidence while maintaining complete testing documentation.
• Perform API and database validation to ensure seamless integration between multiple applications and services.
• Support release validation activities, production deployments, and post-implementation verification.
• Investigate application issues, perform root cause analysis, and collaborate with development teams to resolve defects.
• Participate in defect triage meetings and manage defects through their lifecycle using standard tracking tools.
• Develop and maintain automated test scripts and frameworks to improve testing efficiency and regression coverage.
• Monitor application performance and support production incident analysis to ensure service stability.
• Work closely with business users, product owners, developers, and project teams to ensure successful project delivery.
• Contribute to continuous improvement initiatives, testing standards, and quality assurance best practices.

Requirements:

• Bachelor’s degree in computer science, Information Technology, Engineering, or a related field.
• Hands-on experience in Avaloq core banking systems with exposure to implementation, testing, and production support.
• Strong experience in Functional Testing, System Integration Testing (SIT), User Acceptance Testing (UAT), and Regression Testing.
• Hands-on experience in API testing and database validation using SQL.
• Experience validating complex business workflows and transaction-based applications.
• Knowledge of test planning, test case design, defect management, and release validation processes.
• Experience with defect tracking and project management tools such as Jira and Azure DevOps.
• Exposure to test automation using tools such as Playwright and scripting languages such as Python.
• Familiarity with Agile and Waterfall software development methodologies.
• Strong analytical, troubleshooting, and problem-solving skills.
• Excellent communication and stakeholder management abilities.
• Experience supporting production issues, incident analysis, and application releases is preferred.
• Exposure to banking, financial services, enterprise platforms, or large-scale transactional systems will be an added advantage.

As a Bonding Process & Equipment Engineer at Micron Technology, you will be part of Micron Central team under ADT, responsible for the startup, development, optimization, and control of wafer leve bonding processes (e.g., hybrid bonding, fusion bonding, temporary bonding).

You will drive yield improvement, cost reduction, process capability enhancement, and risk management, while resolving complex manufacturing challenges. This role requires collaboration across process integration, equipment engineering, suppliers, and global manufacturing sites.

Key Responsibilities

Process Development & Optimization

• Develop, qualify, and optimize bonding process technologies (e.g., hybrid bonding, dielectric bonding, TSV-related integration)

• Establish, refine and simplify process conditions, recipes, and operating windows to meet performance and reliability targets

• Drive process capability improvement (Cpk) and defect reduction

Yield & Reliability Improvement

• Lead yield enhancement initiatives by analyzing process, tool, and material interactions

• Perform systematic root cause analysis using methodologies such as DOE, FMEA, 8D, SPC, and fault isolation techniques

• Evaluate defect modes (voids, misalignment, delamination, corrosion) and implement corrective actions

Equipment & Materials Engineering

• Collaborate with equipment engineering to qualify and optimize bonding grinding and trimming tools (e.g., EVG, TEL, Disco platforms)

• Define equipment specifications, roadmap, process control strategies, and matching/fingerprinting requirements

• Evaluate and introduce new materials/spares/parts for performance improvement

Technology Transfer & Process Integration

• Support technology transfer and ramp-up across global sites

• Align process baseline (POR) and ensure consistency through documentation and control plans

• Work closely with integration, CMP, WET, and Films teams to ensure cross-module compatibility

Manufacturing Support & Problem Solving

• Diagnose and resolve manufacturing line issues impacting bonding yield and performance

• Analyze process excursions and implement containment and recovery actions

• Drive continuous improvement for cycle time, tool availability, and cost efficiency

Qualification & Control

• Lead new process and baseline qualifications

• Develop control plans, SPC strategies, and inline monitoring systems

• Establish risk mitigation frameworks and ensure compliance with manufacturing standards

Supplier & Cross-Functional Collaboration

• Partner with suppliers for technology development, process improvement, and cost optimization

• Audit material and equipment suppliers to ensure quality and reliability targets are met

• Collaborate with global teams and partners to drive alignment and execution

Qualifications

Technical Expertise

• Strong knowledge of semiconductor bonding processes (wafer to wafer hybrid bonding, fusion bonding preferred)

• Understanding of Cu plating, CMP interaction, surface preparation, and defect mechanisms

• Experience with advanced packaging technologies (HBM, TSV, wafer-to-wafer bonding) is highly preferred

Skills & Competencies

• Proficiency in data analysis, SPC, and statistical modeling

• Strong problem-solving skills using structured methodologies (8D, FMEA, DOE)

• Ability to manage complex projects involving multiple functions in a high-volume manufacturing environment

• Excellent communication and collaboration skills across global teams

Education & Experience

• Bachelor’s, Master’s, or Ph.D. in Chemical Engineering, Materials Science, Electrical Engineering, or related field

• 7 years+ Relevant proven experience in semiconductor manufacturing or advanced packaging

Micron Technology’s vision is to transform how the world uses information to enrich life and our commitment to people, innovation, tenacity, collaboration, and customer focus allows us to fulfill our mission to be a global leader in memory and storage solutions. This means conducting business with integrity, accountability, and professionalism while supporting our global community.

As a Central Team Alignment Engineer at Micron Technology, Inc., you will be responsible for driving improvements to manufacturing capability, delivering industry benchmark methods at the lowest cost, and managing the execution of global standards across process areas. You will execute to this by focusing on Micron’s 4 pillars, and ensure priorities are aligned to Micron business plan and/or Strategic Objective requirements across manufacturing sites.
Your objective is to leverage global internal and external resources to drive network process and equipment alignment to achieve world-class manufacturing performance. Examples include leveraging suppliers to achieve benchmark manufacturing performance, discovery and implementation of equipment and process best known methods (BKM), equipment utilization optimization, cash cost optimization, and continuous improvement project prioritization and execution globally.

You must be willing and capable of effective collaboration with SITES, Procurement, Global Quality and other OCT departments, and external suppliers to accomplish your objectives. You must also be willing and capable of international travel, as needed, to accomplish your objectives.

• Tool Utilization improvement to meet BIC standards

• Execute a process to eliminate low utilization tools in Micron to hit BIC standards.

• This process must enable the cold/warm shutdown of tools, when not in need, to generate OPEX & CAPEX savings calculated through a cost model.

• Generate globally aligned warm shutdown procedures with no impact to safety & subsequent recovery to production.

• To quantify potential spare parts & manhour savings from PM count reduction. 

• Tool POR-MOR gaps on major volume will need to be closed, aligned across the network & PDM updated.

Standardization of practices & BKMs in Process Areas

• Setup global area alignment teams to address chronic issues, drive improvements & eliminate wastes.

• Channel improvements and lessons learnt established from various forums, eg. TPM Forum, Excursion Review, etc.  into global area forums to decide on the standards for deployment, implementation and audit.

• Design suitable matrices for each process area so that improvements impact the 4 pillars.

• Create a library of area level BKMs for Equipment & Process Engineers to search for standards involving the setup of Equipment & associated processes.

• This library must also serve the purpose to feed-forward area level BKMs to TD for process development & HVM for improvement work that will impact the 4 pillars. 

PM SOP Standardization

• Align the PM Procedures across the Micron network for shared workstations.

• Integrate procedures into a system that allows Engineers & Technicians to access procedures, key recordables & measure PM Success from a tablet/notebook.

• Tie matrices to measure the effectiveness of globally aligned PM procedures.

• Put in place change management for changes to existing procedures & new PM procedures.

• Prepare the work force to move up the value chain from performing PM/CM work to achieving tool to tool matching, improving the capabilities of tools & executing tool/lot dispositions in a standardized method.

SEAL System BKM deployment & sustainment  

• Implement system level BKMs in process areas globally.

• Ensure the fan out of SEAL system BKMs of high criticality and value that impact process areas through the site Task Force Teams (TFT) and local MA Engineers.

• Put in place a process to enable the speed and flexibility to transfer area level BKMs when they are ready.

• Perform one-time standardization audit as last step of TFT implementation and monitor, sustain, and control the system BKMs that impact unit process areas for the duration of one year. 

Demonstrate Leadership

• Active coaching and leadership of projects. Ensure activities are well coordinated and productive.

• Provide support and guidance for BKM implementation in your area(s) of responsibility.

• Create strong morale and team spirit, shares wins and successes, foster open dialog, acknowledges team dynamics, builds on positive relationships and addresses negative ones.

• Work with the Fab groups and the Central Team to maintain alignment in your area(s) of responsibility.

Communication 

• Attend area DAM meetings and update on daily plans for alignment activity to ensure coordination with daily operation priorities

• Attend weekly Area Risk Assessment Control Board Meetings to provide input on change points and assess for opportunity for worldwide sharing

• Report monthly to Area on status and progress for all alignment activity

• Regularly maintain alignment on alignment activity direction with MCT Alignment Manager and Site Area manager

• Maintain a strong and open relationship within your functional area and appropriate team members in other functional areas such as Process Integration Engineering, Quality Systems, Production Operations Management, and Purchasing.

• Promote worldwide sharing and transfer of area-specific domain knowledge.

• Communicate and respond to issues in a timely manner, with a cadence appropriate to the priority of the issue.

• Keep stakeholders and team members informed of project status, progress, and roadblocks/opportunities.

Training and Development 

• Keep up to date on current Fab manufacturing processing for both R and D and manufacturing.

• Stay current with business practices at each site in your area(s) of responsibility.

• Hold self and others accountable for meeting goals and action items from projects, meetings and conversations.

• Set personal development and performance goals that are clear, measurable and in line with department and corporate goals.

• Utilize coaches/mentors to develop skills needed to take next steps in your career progression.

• Organize and utilize time and resources effectively.

• Constantly evaluate self, approach and goals.

• Demonstrate a commitment to quality in work.

• Complete assignments in an accurate, thorough and timely manner.

• Display self-motivation/initiative to complete work, training, or projects.

Safety 

• Maintain knowledge of equipment and area materials safety concerns in area of focus

Education:

• Bachelor's Degree- Engineering or related field of study

Experience

• 5 years experience in Fab (desirable)

• In depth knowledge of Process and Equipment perspective. Area content knowledge with experience of area methods, systems, tools. Experience across multiple areas is a plus. 

• Preferred experience with Micron SEAL standardization process and implementation of new systems within the process area

• Good English skills and the ability to lead and coordinate area teams within their site desired  

Are you our next creator of change?

Are you looking for a career in an inspiring, global environment where your expertise makes a difference? At Neste, you will be working for the world’s leading producer of renewable diesel and sustainable aviation fuel. Together we can help our customers to reduce their greenhouse gas emissions.

We are looking for you,

Process Engineer (PTU and HTU)

to join our Technical Team in Neste Tuas Singapore.

In this job you will work closely with Operations, Maintenance and Engineering functions to strive for Operations Excellence in all plant performance aspects through improvement initiatives and projects.

Together with you and your renewable refining feedstock and pretreatment expertise, we can make an impact today and keep our promises for tomorrow.

Reasons to join

We operate in an inspiring and evolving business environment as a global leader in renewable fuels. We contribute to Neste’s success by living our values every day: we care, we have courage, we cooperate.

We prioritize safety at all times and in every location. We strive to create a positive and impactful work environment.

Transformation brings new possibilities and fosters our courage and curiosity. As a global  company, we support personal development with versatile learning and career opportunities. Collaboration is key, and we believe in flexible, smart ways of working.

More about the job

Your role in our team

• As an experienced Process Engineer, you lead cross functional team to drive continuous improvement of the processing capability and availability of PreTreatment (PTU) and Heat Treatment (HTU) units

• Responsible for the Basis of Design (BOD) and Unit Specific Tolerances (UST)  and defining the Operating Limits for PTU and HTU

• Responsible to build up the competency of PTU and HTU processing technologies in the organization

• Conduct test runs, resolve bottlenecks, develop solutions and manage capital investments in the early phases of the project lifecycle.

• Support operations in troubleshooting major process challenges and investigating high risk non-conformances.

• Improve process safety by participating in risk assessments, managing actions development and implementation.

• As Singapore refinery representative in the global technology team. Sharing and execution of best practices and common initiatives from Rotterdam and Porvoo refineries. 

• Technical support for the unit turnarounds including e.g shutdown, new feedstock introduction, and investments and start-up. 

Keys to success in this role / The best combination to succeed in this role

• B Sc. or higher degree in chemical engineering or relevant field and understanding of Renewable products chemical processing unit operations and engineering.

• At least 10 years of work experience in process engineering and operations in the oil and gas, refining or petrochemical industry from pretreatment processes. 

• Experience on plant operations, test runs, unit startups and shutdowns and operations troubleshooting is considered as an advantage

• Good understanding of end-to-end feedstock value optimization in HVO processes

• Understanding and experience utilizing process models and simulations to support in plant optimization and troubleshooting 

• Strong interpersonal and planning skills

• Good ability to influence in global matrix organization with cultural awareness, performance-driven and active networking attitude 

• High safety standards and strong influencing skills

Let’s get you started

We look forward to receiving your CV and application (with a salary request) by 25 June 2026

Due to security and confidentiality, please submit your application through our recruitment system. Applications sent via email will not be considered.
We will do our best to contact you within 2 weeks after the application time has ended. The recruitment process will include interviews and a possible aptitude assessment. The first interviews are preliminarily scheduled to take place as soon as possible. (The person selected for the position must pass a health examination including a drug test. A security clearance is obtained with your consent.)

Neste in brief

Neste (NESTE, Nasdaq Helsinki) creates solutions for mitigating climate change and accelerating a shift to a circular economy. The company is the world’s leading producer of sustainable aviation fuel (SAF) and renewable diesel, enabling its customers to reduce their greenhouse gas emissions. Neste refines waste, residues and other renewable raw materials to high-quality renewable fuels at its refineries located on three continents. The company’s annual renewable fuels production capacity will be increased to 6.8 million tons in 2027.

Neste has high standards for sustainability and the company has consistently been recognized by several leading sustainability indices. In 2024, Neste's revenue stood at EUR 20.6 billion. Read more: neste.com

THE ROLE:

Returns Debug and RMA execution in Quality & Reliability organization, provide supportive functions to the organization to ensure customer quality issue being addressed evoking the required actions via failure analysis to improve product quality.

THE PERSON:

You will also need to possess strong verbal and written communication skills which are essential when working with a global team. A proactive, outstanding teammate who focuses on teamwork, team building, and growing team success.

AMD's environment is fast paced, results oriented and built upon a legion of forward-thinking people with a passion for winning technology!

KEY RESPONSIBILITIES:

• Perform analysis & report writing on customer returns electrical FA, include analysis on Automated Test Equipment (ATE) and System Level Test (SLT), duplicate customer reported failure on Platform level and perform board level debug.
• Customer returns debug covering pre & post Mass Production, field return including Excursion/Critical issue, also cover debug for Defect Part Per Million (DPPM) improvement.
• Drive cross-functional collaboration by proactively engaging with Device Analysis and Product Engineering teams to lead fault isolation and root-cause investigations.
• Identify and define test coverage enhancements that strengthen product quality, prevent customer-facing failures, and support long-term reliability improvements.
• Provide technical direction in diagnosing complex issues, influencing validation strategies, and ensuring findings translate into actionable quality improvements across functions.
• Provide conclusive and convincing results and align with Program/PLQ/Customer Interfacing team on final analysis report writing for customer communication.
• Local product ownership roles that include but not limited to understanding, tracking and releases of ATE/SLT/OSV which covers RMA/OSV program, test program contents, and Go-To person on owned product technical queries.
• Role model as a coach for internal team that able to guide junior on technical challenges that arise during work for specific IP or failure category.
• Other duties as assigned by supervisor.

PREFERRED EXPERIENCE:

• Strong in silicon debug or Failure Analysis knowledge either on electronics system level or Integrated Chip.
• Candidate should be analytical and detail oriented, strongly interested in debugging complex system, self-starter, and fast learner
• Experience working in root causes digital or analog failure or SCAN/MBIST/High Speed Loopback failure.
• GPU, CPU or x86 architecture knowledge is much preferred
• Java, Python, Perl coding or Linux Shell scripting skills
• Window and Linux proficiency.
• JTAG knowledge is a plus.
• Knowledge in ATE test class/method experience with Advantest 93k platform is a plus.
• Experience in computing hardware, PC systems or Server platform projects or task is a plus.
• Knowledge or experience in PCB board or Customer Reference Board platform (schematics, layout, hardware configuration/setup, platform validation) is a plus
• Knowledge in industry standards like PCIE, USB, or high bandwidth memory is a strong plus
• Experience in AI or Machine Learning project or task is a plus. 

ACADEMIC CREDENTIALS:

• Bachelor’s or Master’s degree in Electrical/Electronic Engineering or Computer Engineering

Job Description:

· Design, develop, and maintain secure software applications using PowerShell scripting, C++, Flutter, Dart, and Python.

· Apply UI/UX design principles to deliver intuitive, efficient, and engaging user experiences.

· Perform code reviews, debugging, and optimization for performance and security.

· Implement and enhance endpoint security features such as malware and ransomware detection, exploit prevention, and intrusion detection.

· Collaborate with security teams to integrate secure coding practices and address vulnerabilities.

· Work closely with cross-functional teams including product managers, security analysts, and designers to ensure project alignment.

· Participate in project planning, sprint reviews, and agile development practices.

· Document technical designs, processes, and procedures for development and security compliance.

· Any other ad-hoc duties as assigned.

Requirements:

· Diploma or Degree in Cybersecurity, Computer Science, or a related field.

· Minimum 3 years of hands-on experience with scripting or coding abilities in languages such as PowerShell scripting, C++, Flutter, Dart, and/or Python. Fresh graduates with related internship experience are welcome to apply.

· Knowledge of network fundamentals, cybersecurity concepts.

· Excellent written and verbal communication skills, with the ability to present information clearly.

· Strong commitment to teamwork, demonstrating a proactive and collaborative attitude.

· Fresh graduates with strong relevant skillsets and project/internship experience are welcome to apply.

Interested and suitable candidate kindly click quick apply. Resume will be forwarded to Stepfan Soon Yit

We regret that only suitable candidate will be notified.

GEMS Recruit/EA License : 23C1459

EA Personnel No : R24120893 (Stepfan Soon Yit)

Job Summary

An MEP (Mechanical, Electrical, and Plumbing) Engineer designs, plans, and oversees the installation of core utility systems in buildings, ensuring seamless integration, compliance with safety codes, sustainability targets, and budget adherence.

Responsibilities

• Develop technical specifications, load calculations, and design layouts for HVAC (Mechanical), power distribution and lighting (Electrical), and water/waste networks (Plumbing) to ensure functional building systems
• Coordinate with architects, structural engineers, and contractors to prevent system clashes and ensure cohesive project execution
• Ensure all designs and plans comply with local building codes, fire regulations, and energy standards to maintain safety and regulatory adherence
• Monitor on-site construction activities to verify subcontractors install MEP systems accurately according to blueprints and safety standards
• Conduct inspections, testing, and troubleshooting of MEP systems to confirm optimal operation and efficiency before project handover
• Utilize Building Information Modeling (BIM) platforms and CAD software such as Revit MEP, AutoCAD, and Navisworks to create and review system designs
• Perform complex calculations including heat load, electrical single-line diagrams, and piping layouts to support accurate system design
• Apply problem-solving, project management, and cross-team communication skills to resolve technical challenges and drive project progress

Preferred competencies and qualifications

• Bachelor’s Degree in Mechanical, Electrical, or Building Services Engineering
• Professional certifications such as the Professional Engineer (PE) license or a PEB-recognized degree in Singapore are highly preferred for senior roles

Job Summary

An MEP (Mechanical, Electrical, and Plumbing) Engineer designs, plans, and oversees the installation of core utility systems in buildings, ensuring seamless integration, compliance with safety codes, sustainability targets, and budget adherence.

Responsibilities

• Develop technical specifications, load calculations, and design layouts for HVAC (Mechanical), power distribution and lighting (Electrical), and water/waste networks (Plumbing) to ensure functional building systems.
• Collaborate with architects, structural engineers, and contractors to coordinate system designs and prevent clashes, ensuring cohesive project execution.
• Ensure all designs and plans comply with local building codes, fire regulations, and energy standards to maintain safety and legal adherence.
• Monitor on-site construction activities to verify subcontractors install MEP systems accurately according to blueprints and safety standards.
• Conduct inspections, testing, and troubleshooting of MEP systems to confirm optimal operation and efficiency before project handover.
• Utilize Building Information Modeling (BIM) platforms and CAD software such as Revit MEP, AutoCAD, and Navisworks to create and review system designs.
• Perform complex engineering calculations including heat load analysis, electrical single-line diagrams, and piping layouts to support design accuracy.
• Apply problem-solving skills to resolve technical issues during design and installation phases.
• Manage project timelines and coordinate cross-functional teams to ensure timely and quality delivery of MEP systems.
• Communicate effectively across teams to facilitate collaboration and project success.

Preferred competencies and qualifications

• Bachelor’s Degree in Mechanical, Electrical, or Building Services Engineering.
• Professional certifications such as the Professional Engineer (PE) license or a PEB-recognized degree in Singapore are highly preferred for senior roles.

Key Responsibilities

• Expected to take accountability of assigned project scope of work and timelines.

• May work from limited or no documentation

• Perform tool build, integration, testing and troubleshooting to start-up new tools. 

• Perform Planning, communicating, and coordinating support plans between stakeholders

• Perform periodic diagnostic testing and necessary preventative maintenance to ensure tool productivity and quality performance. 

• Able to work with Clean Room Facilities stakeholders to specify tool facilities requirements to meet needs of the tool.

• Able to work with the facilities group to manage & troubleshoot any facilities related issues

• Applies diagnostic techniques and use of documentation and test equipment. Define & execute Qualification plans.

• Able to perform routine preventive maintenance within established timeframes.  

• Participate in projects to improve productivity, maintenance downtime, costs reduction and uptime improvement.

• Uses training and experience to identify process, software or hardware related system problems.

• Strives to perform BKM’s. Uses knowledge management systems.  Follows all IP guidelines.

• Assumes responsibility for complete customer satisfaction within work area

• Comply with all safety procedures and consistently demonstrates safety as a value

Requirements

• Prior Experience in ALD Process tools is preferred 

• Prior experience in Cleanroom Facilities VMB & Ampoule Set-up is preferred.

• Prior hands-on experiences in Wafer Fabrication Semiconductor tools

• Relevant education qualification in Engineering

• Ability to work with deadlines and with all levels of stakeholders

• Ability to work in cleanroom work environment

• Expected to work shifts and weekends (Rostered) 

Work Location

• Fusionopolis (One North)

• Build and support Python-based tools, applications, and extensions within the NVIDIA Omniverse platform for industrial use cases.
• Integrate and deploy AI models into 3D simulation environments to power features such as automated inspection, visualization, and interactive control.
• Develop data pipelines that connect IoT, PLC, MES, and other real-time systems to digital twin environments for monitoring and simulation.
• Collaborate with the team to design, develop, and validate proof-of-concept solutions for manufacturing, inspection, and logistics applications.
• Work with AI engineers, developers, and business stakeholders to translate requirements into scalable and maintainable software solutions.

Qualifications

• Bachelor’s degree in Computer Science, Software Engineering, AI, or a related field.
• 3 years of experience in software development, AI applications, or a related engineering role.
• Strong proficiency in Python; experience with C++ is advantageous.
• Hands-on experience integrating or deploying AI models, including Computer Vision, VLM, or LLM applications.
• Solid understanding of APIs, system integration, and data pipeline development.
• Interest in 3D simulation or digital twin technologies; experience with platforms such as Omniverse, Unity, or Unreal Engine is a plus.
• Ability to collaborate effectively within a team to turn concepts into functional prototypes.

Preferred Qualifications

• Practical experience with NVIDIA Omniverse tools such as Create, View, Code, or Isaac Sim.
• Familiarity with USD (Universal Scene Description), PBR materials, and 3D content pipelines.
• Exposure to industrial domains such as manufacturing, smart factories, IoT, MES, or inspection systems.
• Experience using Git, Docker, and deploying applications in cloud or edge environments.
• Knowledge of NVIDIA SDKs or APIs is a strong advantage.

To apply, please visit www.gmprecruit.com

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

Our client is a well-established MNC specializing in precision manufacturing and engineering solutions, supporting customers across various industries globally. Due to their current expansion plan, they are looking for a Key Account Specialist (Entry Level) – Engineering to join their commercial team. They are located in the (West) – easily accessible.

Responsibilities for Key Account Specialist (Entry Level) :

• Manage assigned customer accounts and act as the main point of contact for commercial matters

• Coordinate RFQs, quotations, costing submissions, and follow-up activities

• Support account growth through new program opportunities and product expansion initiatives

• Liaise with engineering, operations, quality, and production teams on customer requirements

• Track project milestones, sample builds, engineering deliverables, and program timelines

• Coordinate customer requests, project updates, and issue follow-ups across multiple manufacturing sites

• Support new product introduction (NPI) activities and project handovers to operations

• Maintain quotation records, sales pipelines, account documentation, and forecasting updates

• Monitor customer complaints, corrective actions, and resolution progress with internal teams

• Assist in preparing business proposals, account reviews, presentations, and commercial reports

• Support cross-site coordination activities involving Singapore, Malaysia, and China operations

• Follow up on opportunity pipelines and support conversion of projects into mass production programs

Requirements:

• Diploma or Degree in Engineering, Business, or related discipline

• Candidates with 1–3 years of relevant experience in account management, sales coordination, customer support, or manufacturing environments are advantageous

• Exposure to precision plastics, tooling, Electronic Manufacturing Services (EMS), or contract manufacturing industries will be an added advantage

• Familiar with RFQ processes, quotations, project coordination, and customer support functions

• Training Provided

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/CV.

We regret that only shortlisted candidates will be notified.

Email Address: job•@recruitpedia.sg
EA License No: 19C9682
EA Personnel No: R22104769
EA Personnel Name: Ong Boon Kiet (Travys)

Our client is a well-established MNC specializing in precision manufacturing and engineering solutions, supporting customers across various industries globally. Due to their current expansion plan, they are looking for a Key Account Specialist (Entry Level) – Engineering to join their commercial team. They are located in the (West) – easily accessible.

Responsibilities for Key Account Specialist (Entry Level) :

• Manage assigned customer accounts and act as the main point of contact for commercial matters

• Coordinate RFQs, quotations, costing submissions, and follow-up activities

• Support account growth through new program opportunities and product expansion initiatives

• Liaise with engineering, operations, quality, and production teams on customer requirements

• Track project milestones, sample builds, engineering deliverables, and program timelines

• Coordinate customer requests, project updates, and issue follow-ups across multiple manufacturing sites

• Support new product introduction (NPI) activities and project handovers to operations

• Maintain quotation records, sales pipelines, account documentation, and forecasting updates

• Monitor customer complaints, corrective actions, and resolution progress with internal teams

• Assist in preparing business proposals, account reviews, presentations, and commercial reports

• Support cross-site coordination activities involving Singapore, Malaysia, and China operations

• Follow up on opportunity pipelines and support conversion of projects into mass production programs

Requirements:

• Diploma or Degree in Engineering, Business, or related discipline

• Candidates with 1–3 years of relevant experience in account management, sales coordination, customer support, or manufacturing environments are advantageous

• Exposure to precision plastics, tooling, Electronic Manufacturing Services (EMS), or contract manufacturing industries will be an added advantage

• Familiar with RFQ processes, quotations, project coordination, and customer support functions

• Training Provided

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/CV.

We regret that only shortlisted candidates will be notified.

Email Address: job•@recruitpedia.sg
EA License No: 19C9682
EA Personnel No: R22104769
EA Personnel Name: Ong Boon Kiet (Travys)

Responsibilities:

• Responsible for designing, building, and maintaining responsive, high-performance front-end applications using React.js, while integrating with Java/Spring Boot REST APIs.
• This role focuses on creating modular UI components, implementing state management, ensuring quality through testing, and collaborating with design and back-end teams to deliver reliable user experiences.
• Roles and Responsibilities
• Build modular, reusable, and testable UI components (e.g., forms, buttons, dashboards) using JSX.
• Translate wireframes and UI designs into fully functional, responsive, and interactive front-end code

Requirement:

• Proficiency with HTML5, CSS3, and React.js.
• Experience building component-based UI using JSX and modern React patterns (Hooks).
• Working knowledge of state management approaches (Redux and/or Context API). - Experience integrating UI with RESTful APIs, including back-end services built with Java and Spring Boot.
• Experience with version control (Bitbucket) and modern front-end tooling (Webpack or Vite) and package managers (npm or yarn).
• Experience writing and maintaining unit/integration tests using Jest and React Testing Library.

Interested applicants, Please send your updated resume in Word format to hres@itcspl.com

Please indicate Job Code "Software Engineer - 101" on email subject

We regret that only shortlisted candidates will be notified.

Bacalso John Bryan Bedayo (Reg No. R1106648)

IT Consultancy & Services Pte Ltd

EA No: 92C5311

Please visit www.itcspl.com to learn more information about ITC

Be part of a well-known multinational contractor delivering iconic marine and coastal projects, including reclamation, dredging, breakwaters, seawalls, jetties, and piling works.

Why Join Us:

• Strong Career Growth: Join a growing team with clear internal career progression opportunities.
• Experienced & Structured Team: Work alongside seasoned professionals in a well-structured environment.
• High-Profile Projects: Contribute to Singapore’s landmark marine and coastal developments.ng, with experience in marine / heavy civil works preferred.

How to Apply

Technical Sales Engineer (Outdoor)

• Working Days:  Monday to Friday
• Working Hour: 8am to 5.30pm
• Working Location: Ubi
• Salary: $ 4k to $6k (No Commission)

Requirements:

• At least 1 year or more experience in the electronics field preferably in components sale
• Familiar with Semiconductor design and application 
• Class 3 driving license
• IEEE graduates an advantage but diploma holders must have electronics background
• Must have good knowledge of local electronics business and be prepared to work hard meet the company’s goals and objectives
• Understand what is a Memory, Logic, MosFets etc.. (Will provide training if needed)
   

 Job Scope:

• Drive product line & develop strategies
• Create business opportunities with potential customers
• Conduct market survey
• Prospect for new accounts
• Service existing customers
• Provide market trend feedback
• Assist in price negotiations and customer delivery issues
• Knowledge of electronic component business
• Must be able to work independently with purchasing and design engineers
• Knowledge of semiconductors (Analog / Digital)
• Technical competency
• Flexibility to work long hours if needed to finish the daily assignments or to take on a new role if needed
  

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279