Job Summary

The Quality Control Supervisor is responsible for overseeing all quality assurance and food safety activities in the food production facility. This role ensures that products meet company quality standards, customer specifications, regulatory requirements, and ISO 22000 Food Safety Management System (FSMS) standards. The supervisor monitors production processes, hygiene practices, documentation, corrective actions, and continuous improvement initiatives to ensure safe and high-quality food products are consistently produced.

Responsibilities:

• Supervise daily quality inspections for raw materials, processing, packaging, and finished products.
• Ensure compliance with product specifications, sensory standards, and food safety requirements.
• Conduct routine checks on product appearance, texture, moisture content, weight, labeling, and packaging integrity.
• Monitor Critical Control Points (CCPs) and Operational Prerequisite Programs (OPRPs) during production.
• Review and verify production records, batch records, and quality reports.
• Investigate product non-conformities, customer complaints, and quality incidents.
• Implement corrective and preventive actions (CAPA) to prevent recurrence of quality issues.
• Coordinate product sampling and laboratory testing when required.
• Ensure full compliance with ISO 22000 Food Safety Management System requirements.
• Maintain and monitor HACCP plans, hazard analysis, and risk assessments for food production processes.
• Ensure food safety documentation, SOPs, work instructions, and records are properly maintained and updated.
• Conduct internal audits and assist during external audits, certification audits, and regulatory inspections.
• Monitor traceability and product recall procedures to ensure readiness and compliance.
• Verify sanitation, cleaning, and pest control programs are effectively implemented.
• Ensure staff adherence to GMP (Good Manufacturing Practices), SSOP (Sanitation Standard Operating Procedures), and food safety protocols.
• Support continuous improvement initiatives related to food safety, hygiene, and operational efficiency.
• Work closely with Production Manager to ensure production processes meet quality and food safety standards.
• Monitor processing parameters such as packaging conditions.
• Ensure proper calibration and maintenance of measuring and inspection equipment.
• Assist in optimizing production efficiency while maintaining product quality standards.
• Ensure proper handling and storage of raw materials and finished products.

Requirements:

• Diploma or Degree in Food Science, Food Technology, Microbiology, Quality Assurance, or related field.
• Minimum 3–5 years of experience in food manufacturing quality control or food safety management.
• Experience in food production is preferred.
• Hands-on experience with ISO 22000, HACCP, GMP, and food safety audits.
• Strong knowledge of food safety regulations and ISO 22000 standards.
• Familiarity with HACCP principles and CCP monitoring.
• Good leadership, communication, and problem-solving skills.
• Strong attention to detail and documentation accuracy.
• Ability to work in a fast-paced food production environment.
• Proficiency in Microsoft Office and quality reporting systems.

Join Velocity Electronics as our next Quality Engineer in Singapore.

If you are driven to elevate quality standards and strengthen operational performance that support business success — we want to meet you.

What can you expect to do?

The Quality Engineer ensures product conforms to our customers’ requirements and assists with responding to customer concerns related to product quality in order to deliver exceptional experiences and outcomes.

You will be responsible for:

• Perform final quality control (QC) checks on inspected product to ensure it conforms to our customers’ requirements
• Provide training and technical support and assist with responding to customer concerns related to product quality
• Conduct internal QMS and ESD audit

In addition, you will:

• Review inspection results and, as needed, perform supplemental inspections on product to determine acceptability of product
• Document results of final QC checks in Velocity’s ERP system
• Communicate inspection findings to the Purchasing and Sales teams and advise on the actions necessary to resolve issues (if applicable)
• Coordinate with the Operations Manager to ensure Inspectors are performing inspections to standard
• Conduct inspection skills and technical trainings for quality inspectors
• Provide technical support to Sales and Purchasing Departments
• Assist the Quality Manager in Customer Corrective Action Request
• Perform other duties as requested by management

What is the experience and knowledge needed to be successful in this role?

Our ideal candidate is:

• Exceptional judgment
• Detail-oriented and thorough
• Strong written and verbal communication skills
• Problem solver
• Able to effectively coordinate and communicate with others
• Adaptable and flexible
• Able to work on several projects simultaneously
• Independent

Skills and Experience:

• Bachelor’s degree preferred; Diploma holders with relevant experience will also be considered
• Minimum 5 years of experience performing quality inspection on electronic components with demonstrated ability to make valid conformance decisions
• Expert product knowledge, experience working with complex ERP systems
• Understanding of basic math, including percentages and tolerances

This position will be located in our Singapore Office, APAC Regional Headquarters.

Please note that applicants must have the legal right to work in Singapore, as visa sponsorship is not available for this role.

Why Join Us

At Velocity Electronics, our core values—Be Amazing Today, Demonstrate Mutual Respect and Trust, Act Courageously, and Own Your Outcomes—drive our success.

If you thrive in a fast-paced, results-oriented environment and are motivated to exceed targets, you will be empowered to take ownership of your success, build meaningful relationships, and drive growth through innovative solutions.

Join a top independent electronic components distributor serving the world’s leading contract manufacturers and OEMs.

Job Description

We are seeking a Design Quality Engineer to support the development and qualification of semiconductor equipment, with a focus on test planning, reliability validation, and data analysis to ensure high product performance and quality.

Key Responsibilities

• Develop and execute qualification test plans to validate new product designs based on customer use cases
• Design and implement Accelerated Life Testing (ALT) and stress tests for high-value components
• Perform statistical analysis on test and reliability data (e.g., DOE, Cpk, regression) and prepare technical reports
• Evaluate component and system-level quality; work closely with suppliers to drive quality improvements
• Conduct root cause analysis and troubleshooting in collaboration with engineering teams
• Ensure all defects identified during testing are logged, tracked, and resolved through corrective actions
• Maintain 5S standards and ensure proper lab safety, equipment maintenance, and calibration

Job Requirements

• Bachelor’s Degree in Electrical, Electronics, Instrumentation, Mechanical Engineering, or related field
• Minimum 3 years of experience in semiconductor or high-tech manufacturing environment
• Strong knowledge of qualification test planning, test instrumentation, and problem-solving methodologies
• Experience in statistical analysis (DOE, Cpk, t-test, regression, reliability analysis)
• Proficient in Minitab and Microsoft Office (Excel, Word, PowerPoint)
• Independent, proactive, and able to work in a fast-paced environment
• Strong communication and interpersonal skills

l  Why Join Our Leadership Team

At Entegris, we believe leaders exist at every level of theorganization. We leverage the diverse perspectives of our global team to driveinnovation in the semiconductor industry. As the Asia Quality EngineeringDirector, you will be a high-impact, high-visibility leader responsible forshaping quality excellence in one of our most critical regions.

We are a values-driven culture, and we expect our leaders tochampion our PACE values:

-         People & Teamwork: Build and mentorambitious, high-performing teams.

-         Accountability, Integrity & Trust: Ownregional performance and foster transparent relationships.

-         Creativity & Innovation: Find uniquesolutions to complex customer challenges.

-         Dedication to Excellence: Set the goldstandard for quality and operational success.

l  Job Overview

LeadershipExpectations (PACE + Great Leader Profile)

-  Customer centricity: Anticipate customerrequirements, translate Voice of Customer (VOC) into measurable quality plans,and lead crisp communication during escalations.

-  Data-driven decisions with speed: Userisk assessment and statistical methods to accelerate containment, root causeconfirmation, and permanent corrective/preventive actions.

-  Accountability: Establish clear ownershipacross sites and functions, deliver on commitments, and reinforce disciplinedexecution against KPIs.

-  Global partnership: Align prioritiesacross Asia plants and North America-based manufacturing/support teams toensure consistent standards and one-team execution.

-  Innovation: Modernize quality systems andreporting, standardize best-known methods, and scale improvements across sites.

-  Talent development: Build organizationalcapability by hiring, coaching, and developing CQE/QE leaders; createsuccession depth and strong knowledge transfer.

Theseexpectations align to Entegris’ PACE Values and the Great Leader Profile (GLP)characteristics used across the company to define and develop leadershipbehaviors.

TheAsia Quality Engineering Director is a dynamic, cross-functional leadershiprole responsible for developing and executing regional quality strategy alignedto global objectives—driving zero-defect performance and high-reliabilityoutcomes across Process and Product Management -related value chains. Based in Singaporeand reporting to global Quality leadership, this role leads multi-site teamsand partners with Sales, Manufacturing, Product, and Supply Chain to meetdemanding customer and corporate KPIs.

l  Primary Responsibilities

-         Strategic leadership: Develop and executeregional quality strategies aligned with global corporate objectives to achievezero-defect, high-reliability standards for wafers and assembly; translatestrategy into operating mechanisms, resourcing, and measurable outcomes.

-         Quality Management System (QMS): Leadquality assurance processes for regional plants, including qualification,change management, performance monitoring, audits, corrective action plans maintain,effective CAPA closure and continuously improve the QMS across Asiamanufacturing sites to ensure readiness and adherence to the requirements.

-         Customer quality interface: Serve as thekey quality liaison for strategic Asia customers; lead escalations for qualityexcursions and reliability failures, and drive robust corrective actions using sixsigma, 8D, RCA, and cross-functional containment/preventionplans.

-         Continuous improvement: Champion aquality-first culture by driving Lean Manufacturing and Six Sigma initiatives;strengthen process control and capability using data analytics to reduce defectdensity and improve customer satisfaction.

-         Team leadership: Lead, mentor, and scalea high-performing regional Quality organization across multiple Asia locations;set clear expectations, develop successors, and build strong engagement andretention.

l  Required Qualifications & Skills

-             Experience: 12–15+ years ofQuality experience in the semiconductor industry, including 10+ years ina senior leadership role.

-             Technical knowledge: working knowledge orexperience of front-end (wafer fabrication) and/or back-end(assembly, packaging, test) processes/ ecosystem of customer qualification andchange control expectations is strongly preferred.

-             Semiconductor quality toolkit:Expert-level application of 8D, RCA, CAPA/SCAR, FMEA, SPC/SQC, DOE, Six Sigma,and trend/statistical analysis to drive robust corrective and preventiveaction.

-             Problem-solving: Demonstrated ability tolead containment, failure analysis, root cause confirmation, and permanentfixes in time-sensitive, customer-facing situations.

-             Leadership: Strong cross-culturalleadership capability to lead teams across multiple Asia locations (e.g.,Singapore, Malaysia, Taiwan, China, Korea and Japan) and influence outcomesthrough a matrixed organization.

-             Education: Bachelor’s degree inEngineering, Physics, or Materials Science; Master’s degree is highly desired.

-             Communication: Excellent verbal andwritten English; proficiency in additional regional languages (includingMandarin) is a plus.

-             Location & travel: Based in Singaporeand willing to travel frequently within Asia and periodically to globalheadquarters/manufacturing support teams as needed.

Product Quality

·    Maintains quality engineering programs, standards and improvements within the organization.

·    Develops and initiates standards and methods for inspection, testing and evaluation based on medical device standards

·    Devise sampling procedures and designs and develops forms and instructions for recording, evaluating and reporting quality and reliability data.

·    Develops and implements methods and procedures for disposition of discrepant materials.

·    Directs inspection team engaged in measuring, inspecting and/or testing products or parts and tabulating data concerning materials, product or process quality and reliability.

·    Executes the inspection / testing of new equipment capability

·    Supervises inspection team on the inspection plan

·    Supports Product Engineering and Program Manager with customer interfaces as necessary on quality related issues.

·    Provides liaison to various regulatory bodies

·    Responsible for authorizing the released of final products to customer

·    Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs

·    Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

·    Assist others within same or cross-functional department assign by Head of Department/Manager on ad-hoc duties as necessary.

Job Requirements

• Typically requires a Bachelor Degree or equivalent experience
• Minimum 2 years of experience in similar capacity
• Familiar with ISO 13485 Quality System Requirements and FDA CFR Part 820 regulations
• Familiar with inspection equipment, statistical tools, Geometric Dimension and Tolerance knowledge will be an advantage
• Candidates with relevant experiences will be considered for Senior position

Quality Manager

We are seeking a Quality Manager to lead the company's Quality Management System (QMS) and ensure products, processes, and operations consistently meet customer, regulatory, and internal quality requirements. The role will oversee quality assurance and quality control activities, drive continuous improvement initiatives, and support customer and certification audits.

Key Responsibilities

• Manage and maintain the company's Quality Management System in accordance with ISO 9001 and ISO 13485 requirements.

• Lead the QA team and oversee incoming, in-process, and outgoing quality activities.

• Ensure products meet customer specifications, drawings, and quality standards.

• Investigate quality issues and drive effective corrective and preventive actions.

• Handle customer complaints, quality concerns, and audit requirements.

• Plan and conduct internal audits, management reviews, and continuous improvement initiatives.

• Work closely with Production, Engineering, and Project teams to improve process capability and product quality.

• Monitor quality performance metrics and implement actions to reduce defects and customer complaints.

• Manage calibration systems and ensure compliance of measuring equipment.

• Support supplier quality management and new product introduction activities.

Key Skills & Requirements

• Strong knowledge of ISO 9001 and ISO 13485 Quality Management Systems.

• Experience in quality management within a manufacturing environment, preferably plastic injection molding.

• Familiarity with quality tools such as 8D, FMEA, Root cause analysis etc.

• Strong leadership, communication, and problem-solving skills.

• Experience managing customer audits, certification audits, and quality documentation.

Job Description

· Lead audit engagements of various sizes and industries from planning, execution to finalisation.

· Proactively involve client, manager and partner in the audit engagement in resource planning, managing deadlines, identifying and resolving issues, and ensuring audit is executed and documented with quality.

· A good coach to junior team members, and is able to bring out the potential of the team members to meet the objectives with lesser effort. This includes understanding the strengths and weaknesses of team members and giving timely and constructive feedback to team members for their personal development.

· Generally have a positive attitude towards learning new knowledge and skills, rise up to challenges and have a long term view towards issues encountered.

· Aspire to move up to next level in the auditing career and develop specialization in certain industries eventually.

· Firm will provide support in professional development i.e. sponsorship for taking professional courses or external training that is tuned to the personal development needs of the senior.

Join our outstanding team at Micron as a Product Quality Assurance (PQA) Technician in Singapore and contribute to our world-class engineering efforts! This role offers an exceptional chance to collaborate closely with local and global collaborators and drive quality excellence in our products. 

Responsibilities and Tasks:

• Assist PQA engineer in managing quality deviation and drive for closure of corrective/preventive actions to drive for deviation reduction and continual improvement.

• Conduct inline assessment and validate corrective and preventive actions to drive inline and outgoing control to meet customers’ quality requirement.

• Monitor and keep track corrective action, prevention action and lesson learn fanout status.

• Use automation tool (Power BI, Power Apps, Tableau etc) to develop and enhance dashboards for quality metrics. 

• Establish standard operating procedure for quality related monitoring.  

• Perform Data Mining to identify quality improvement opportunities and assist PQA engineer in leading site quality improvement projects

Requirements: 

• Nitec/Higher Nitec/Diploma in Engineering or a related field.

• Able to work on 12 hours rotating shift (including night shift).

• Proven experience in quality control within an engineering environment.

• Ability to troubleshoot and resolve equipment issues.

• Excellent documentation and procedural development skills.

• Strong collaborative skills to work with diverse teams.

• Ambitious and diligent approach to uphold high standards of material quality.

• Ability to determine and successfully implement quality control protocols.

• Knowledge and experience in Artificial Intelligence applications is a plus

• Embody Micron’s core values:

• People – Respect, develop, and empower others

• Innovation – Drive continuous improvement and breakthrough thinking

• Tenacity – Show grit and determination

• Collaboration – Build trust and foster teamwork

• Customer Focus – Deliver excellence and value 
  
• Assists engineers in testing and inspecting products at various stages of the production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products. Implements methods and procedures for inspecting, testing, and evaluating products, processes and/or production equipment. Report such data to management and production engineering so problematic areas may be addressed.

Join our outstanding team at Micron as an Incoming Quality Control Technician in Singapore and contribute to our world-class engineering efforts! This role offers an exceptional chance to collaborate closely with local and global collaborators and drive quality excellence in our materials.

Responsibilities and Tasks: 

• Assist the IQC Engineer in the qualification of new IQC tools.

• Provide support for IQC calibration and preventive maintenance, including raising purchase requisitions to equipment vendors.

• Address issues related to IQC equipment to ensure flawless operations.

• Develop and detail IQC procedures and establish operation and PM systems.

• Establish and uphold SAP QM, eCOA, and IQC SPC for incoming materials.

• Conduct First Article Inspection activities for new materials.

• Conduct incoming material inspections for quality control, encompassing a range of materials such as HBM materials.

Requirements: 

• Nitec/Higher Nitec/Diploma in Engineering or a related field.

• Able to work on 12 hours shift (including night shift)

• Proven experience in quality control within an engineering environment.

• Ability to troubleshoot and resolve equipment issues.

• Excellent documentation and procedural development skills.

• Strong collaborative skills to work with diverse teams.

• Ambitious and diligent approach to uphold high standards of material quality.

• Ability to determine and successfully implement quality control protocols.

• Knowledge and experience in Artificial Intelligence applications is a plus

• Embody Micron’s core values:

  People – Respect, develop, and empower others

  Innovation – Drive continuous improvement and breakthrough thinking

  Tenacity – Show grit and determination

  Collaboration – Build trust and foster teamwork

  Customer Focus – Deliver excellence and value

Assists engineers in testing and inspecting products at various stages of the production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products. Implements methods and procedures for inspecting, testing, and evaluating products, processes and/or production equipment. Report such data to management and production engineering so problematic areas may be addressed.

• Up till $2800 basic + Variable Bonus

• Established Local Food Producer

• Hands-On Quality & Food Safety Exposure

• Career Development Opportunities

• 5 days, Monday to Friday, 9am to 6pm

Our client, an established poultry and egg producer in Singapore, is inviting qualified candidates to join as a Quality Control Executive (Food).

RESPONSIBILITIES:

• Monitor and verify that food production activities adhere to food safety guidelines, product specifications, and applicable regulatory requirements.

• Assist in establishing, implementing, and maintaining food safety management systems such as ISO 22000, FSSC 22000, Halal, and relevant authority standards.

• Perform regular checks on production lines and processes to ensure standards are consistently met, including in-process product inspections.

• Support regulatory body reviews, customer audits, and site visits, including following up on corrective actions and documentation as needed.

• Report any deviations or non-compliance in products or processes promptly to supervisors or management.

• Carry out additional responsibilities and special tasks as assigned.

REQUIREMENTS:

• No prior experience needed; on-the-job training will be provided.

• Comfortable working in cold storage/production areas (10–15°C)

• Attention to detail, reliability, and willingness to learn.

• Preferably a Diploma in Food Science, Food Technology or equivalent.

• Preferably knowledgeable in local C international food safety standards.

OTHER INFORMATION:

• Location                                 : Buroh Lane

• Working Days/Hours           : 5 days, Monday to Friday, 9am to 6pm

• Salary                                      : Up till $2800 basic + Variable Bonus

The Company strives to achieve employee satisfaction and provides conducive working environment, attractive incentives and remuneration to all staff.

Please indicate the below information in your resume:

• Current & Expected salary

• Reason(s) for leaving

• Availability to commence work

We regret only shortlisted candidate will be notified. All applications will be treated with the strictest confidence.

1. Nature of Engagement & Requirements

• Remote working arrangement except when need to head down for QC
• Flexible working hours (no fixed schedule)
• Responsible for outcomes and quality oversight of assigned students, coaches, and client experience
• Have swim coach background
• Have customer service experience
• Have team managerial experinence

2. Compensation Structure

Monthly Stipend (Fixed)

• $1,000 per month

• Covers all core responsibilities listed in Section 3

Monthly Performance Bonus (Up to $800)

• Bonus is paid monthly based on achievement of key outcomes:

A. Student Retention Performance – $400

• $400 payable if monthly retention rate is ≥ 98%

• 0 payout if < 98%

B. Service Quality / Escalations – $400

• $400 payable if 2 or fewer escalated cases in the month

• 0 payout if > 2 escalations

Bonus Eligibility Condition - Bonus is only payable if the Contractor has:

• Fulfilled all core responsibilities in Section 3

• Maintained timely and satisfactory execution of duties throughout the month

3. Core Responsibilities (Covered under $1,000 stipend)

A. Lesson Quality & Coaching Oversight

• Conduct minimum 3 quality check (QC) observations per week

• Observe lessons and assess teaching quality, student progress, and adherence to SOP

• Engage with parents/students for feedback or concerns

• Provide feedback and follow-up with coaches after observations/gathering feedback

B. Coach Management

• Engage regularly with coaches to ensure:

• SOP compliance - e.g. Highlight frequent/late cancellations or no shows

• Proper student progression

• Consistent lesson quality

• Communicate updates, reminders, and operational changes to coaches

C. Student Progress & Parent Engagement

• Understand goals and needs of students

• Proactively conduct follow-ups for at least 14 students per week - check in & update on progress after engaging with coach

• Maintain communication with parents regarding progress/feedback where necessary

• Manage SwimSafer test registration process & post-test outcomes

D. Escalation Handling

• Receive escalations from admin or coaches regarding:

• Lesson quality issues

• Parent dissatisfaction

• Coach-related concerns, etc

• Assess and intervene where necessary to resolve issues professionally

E. Student Transition Plan

• Plan smooth hand-over of students from one coach to another when needed

• Ensure satisfaction through the hand-over and follow up after transition is complete

E. Administration Oversight

• Supervise admin support staff

• Assign and review administrative tasks when required

• Ensure administrative accuracy and timeliness in execution of duties

F. Reporting

• Submit weekly summary report, including:

• Student progress updates

• Issues / escalations & outcomes

• Coach performance observations

• Key risks or concerns

• Terminations & reasons

H. Retention & Service Improvement

• Monitor reasons for student termination

• Identify patterns and propose improvements to enhance retention and service quality

4. Working Style Expectations

• Remote and flexible working arrangement

• Expected to respond within reasonable timeframes for escalations and operational matters

• Focus is on outcomes, consistency, and service quality rather than hours worked

5. Key Performance Indicators (Monthly)

• ≥ 98% student retention rate

• ≤ 2 escalated cases

• Minimum QC sessions completed weekly

• Minimum student follow-ups completed weekly

• Timely submission of weekly reports 

Job Summary:

Minimizes financial risk to the company by investigating and evaluating new and existing customers' creditworthiness and analyzes credit risk. Researches and resolves billing disputes. Recommends and/or implements credit extensions, revocations or collections referrals.

Principal Responsibilities:

• Researches and verifies credit data on customers to establish or update lines of credit.

• Assesses, recommends and/or approves credit limits.

• Investigates and resolves customer invoice disputes to facilitate payment from, or issuance of, credit to customer.

• Reviews customer accounts for aging of unpaid balances and pending orders, solicits payments on overdue accounts, places delinquent accounts on ‘hold’ status until payment arrangements are secured, determines payment plans/schedules.

• Follows up on payment arrangements and recommends transfer of outstanding customer accounts to collection agencies.

• Develops and maintains relationships with outside credit and/or collection agencies.

• Maintains a variety of files and records associated with delinquent accounts, incomplete files and credit risks.

• Maintains and updates electronic and/or hard copy files in a timely and accurate manner.

• Other duties as assigned.

Job Level Specifications:

• Extensive knowledge of the organization, job, practices and procedures, enabling a high level of contribution.

• Completes complex assignments requiring significant judgment, initiative and problem solving skills.

• Work is performed under minimal guidance and assigned in the form of desired expectations. Independent judgment is used to determine best approach and creativity is expected to achieve maximum results and handle new situations.

• Collaboration with internal or external contacts. May participate on teams for special assignments. Responds to requests from senior management, internal and/or external contacts.

• Actions may have significant impact to department as well as others. Errors may be difficult to detect and remedy and potentially result in loss of customer business, materials, money and/or time.

Work Experience:

• Typically requires a minimum of two years of related experience.

The Quality Technician Auditor is responsible for performing in-process quality control audits and inspections throughout the manufacturing process. This role ensures that products meet internal and customer quality standards by identifying process deviations, supporting corrective actions, and driving continuous improvement in production quality.

Key Responsibilities

• Provide guidance and training to operators on quality requirements and best practices.

• Conduct regular in-process audits and inspections at various stages of manufacturing to verify compliance with quality standards and procedures.

• Utilize measurement tools and equipment (e.g., calipers, micrometers, gauges) to assess product and process conformity.

• Document audit findings, non-conformances, and corrective actions in detailed reports for traceability.

• Collaborate with production, engineering, and quality teams to address process deviations and implement corrective/preventive actions.

• Monitor and verify the effectiveness of corrective actions and process improvements.

• Support root cause analysis for quality issues and participate in cross-functional problem-solving teams.

• Ensure strict adherence to quality and safety protocols.

• Maintain 6S standards in the production and audit areas.

• Present audit results and improvement recommendations to supervisors and cross-functional teams.

Qualifications

Minimum:

• Nitec/Higher Nitec/Diploma in Engineering, Science, or related technical field.

• Ability to work on 12 hours shift and work in the production line.

• Good communication and documentation skills.

• Strong attention to detail and analytical skills.

• Proficient in Microsoft Office applications, with the ability to apply them effectively in daily work.

Preferred:

• Experience in in-process quality control or manufacturing audits preferred.

• Familiarity with manufacturing processes, quality standards, and inspection techniques is preferred.

• Fundamental knowledge of AI tools is an advantage.

• Good project management skills and continuous improvement knowledge is preferred.
  

  Assists engineers in testing and inspecting products at various stages of the production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products. Implements methods and procedures for inspecting, testing, and evaluating products, processes and/or production equipment. Report such data to management and production engineering so problematic areas may be addressed.

The Contamination Control & ESD Technician supports the semiconductor manufacturing environment by ensuring that cleanroom conditions and electrostatic discharge (ESD) protections meet factory and industry standards. This role conducts routine environmental monitoring, performs ESD audits, supports qualification activities, and assists in contamination or ESD‑related investigations. The technician works closely with engineers and cross‑functional teams to maintain a stable and compliant production environment, helping safeguard product quality, equipment reliability, and operational efficiency.

Key Responsibilities:

• Perform routine cleanroom environmental monitoring, including airborne particle measurements, AMC sampling, metal contamination checks, and environmental logging.

• Conduct ESD compliance checks, such as wrist strap and footwear testing, equipment grounding verification, workstation audits, and point‑to‑point resistance checks.

• Assist engineers with tool and material qualifications, ensuring all new equipment, spare parts, and consumables meet contamination and ESD requirements before release to production.

• Support contamination and ESD excursion investigations by collecting samples, gathering data, performing preliminary checks, and documenting observations accurately.

• Carry out scheduled preventive maintenance and calibration for environmental and ESD monitoring instruments to ensure consistent performance.

• Maintain detailed and accurate documentation, checklists, and records to support process traceability and audit compliance.

• Perform cleanroom protocol checks, ensuring proper gowning, material handling, housekeeping, and contamination‑control standards are followed.

• Report abnormal conditions promptly and escalate potential contamination or ESD risks to engineers or supervisors.

• Collaborate with Manufacturing, Equipment, Facilities, and Engineering teams to support daily fab operations and ensure compliance across production areas.

• Adhere to all EHS, cleanroom, and company safety requirements while maintaining a high standard of workplace discipline.

• Participate in continuous improvement activities, offering suggestions to improve contamination control and ESD practices.

Requirements:

• Nitec/Higher Nitec/Diploma in Electrical, Electronics, Mechatronics, Chemical Process, or a related technical field; equivalent hands‑on experience in a manufacturing or semiconductor environment is also accepted.

• Ability to work in a semiconductor cleanroom environment, following gowning, contamination‑control, and safety protocols.

• Strong attention to detail with the ability to follow standard operating procedures and complete tasks accurately and consistently.

• Good communication skills and the ability to work effectively within cross‑functional teams.

• Comfortable working in a fast‑paced, dynamic semiconductor fab environment with shifting priorities.

• Willingness to learn, adapt, and take ownership of assigned tasks with positive attitude and strong teamwork mindset.

• Experience with environmental monitoring tools or ESD test equipment is an added advantage.

• Able to work on 12 hours rotating shift (including night shift)
  

  Develops, evaluates, revises, and applies technical quality assurance protocols/methods to inspect and test in-process raw materials, production equipment, and finished products. Ensures activities and items are in compliance with both company quality assurance standards and applicable government regulations. Performs analysis and identifies trends in the inspection of finished products, in-process materials and bulk raw materials, and recommends corrective actions when necessary. Ensures that established manufacturing inspection, sampling and statistical process control procedures are followed. May assure compliance to in-house and/or external specifications and standards, such as GMPs and ISO regulations. Evaluates and analyzes the efforts in organizing, documenting, and interpreting inspection support documents and records.

The PCS Technician executes, maintains, and sustains Micron’s PCS systems, SPACE Statistical Process Control (SPC), Applied Materials E3: Fault Detection and Classification (FDC) and Run to Run (R2R), MES (Manufacturing Execution System), MESCentral, and MAM (Manufacturing Application Management), RMS (Recipe Management Systems)

to ensure accurate system updates, stable automation behavior, and strong data integrity across manufacturing.

Key Responsibilities

1) SPC (SPACE Platform)

• Create and update SPC charts, limits, rules, and attributes.

• Monitor chart health and escalate abnormalities.

2) E3 – FDC & R2R

• Update FDC traces, limits, alarms; perform basic troubleshooting.

• Enable/disable R2R models based on engineering instruction.
   

3) RMS – Recipe & Parameter Control

• Process recipe revisions and parameter changes.

• Validate recipe uploads and equipment communication.
   

4) SigmaSpec – Specification Management

• Update SigmaSpec per approved engineering change.

• Ensure spec alignment across SPC, FDC, R2R, and RMS.
   

5) MES / Shop Floor Systems

• Execute MES changes, validations, and state transitions.

• Support WIP, equipment status, and data collection plan accuracy.

• Troubleshoot MES errors (missing data, state flow issues, communication faults).
   

6) MAM – Application Logic Support

• Update PCS‑linked MAM workflows.

• Validate rule behavior affecting SPC, FDC, and system communication.

• Escalate MAM logic issues impacting control strategy.
   

7) Governance & Documentation

• Execute changes following ECN and site governance procedures.

• Maintain change logs and verification/closure evidence.
   

8) Monitoring & First‑Line Troubleshooting

• Monitor dashboards for alarms, data gaps, and communication failures.

• Perform first‑line diagnosis and escalate as needed.

9) Cross‑Functional Collaboration

• Support Process, Equipment, Manufacturing, PCS/Automation, and Quality Engineering.

• Provide on‑floor support during major updates or equipment conversions.

10)Competencies

• Problem Solving-Structured, data‑driven troubleshooting.

• Accountability-System reliability, documentation accuracy, and ownership.

• Teamwork-Effective collaboration across engineering & operations.

• Innovation-Continuous improvement mindset and persistence through complexity.

Qualifications

• Nitec/Higher Nitec/Diploma in Engineering, Electronics, Mechatronics, IT, Automation, or related field.

• Basic understanding of SPC, automation, and semiconductor operations.

• Experience with SPACE SPC, E3 FDC/R2R, RMS, MES/Shop Floor and SigmaSpe is preferred.

• Semiconductor manufacturing or automation experienc will be ana dded advantage.

• Able to work on 12 hours rotating shift.
  

  Develops, evaluates, revises, and applies technical quality assurance protocols/methods to inspect and test in-process raw materials, production equipment, and finished products. Ensures activities and items are in compliance with both company quality assurance standards and applicable government regulations. Performs analysis and identifies trends in the inspection of finished products, in-process materials and bulk raw materials, and recommends corrective actions when necessary. Ensures that established manufacturing inspection, sampling and statistical process control procedures are followed. May assure compliance to in-house and/or external specifications and standards, such as GMPs and ISO regulations. Evaluates and analyzes the efforts in organizing, documenting, and interpreting inspection support documents and records.

The Quality System Engineering Technician supports the implementation, maintenance, and continuous improvement of the Quality Management System (QMS). This role ensures compliance with applicable standards, company procedures, and customer requirements through documentation control, audits, data analysis, and corrective action support.

Key Responsibilities:

Quality Management System (QMS)

• Support the administration and maintenance of the Quality Management System (QMS) in accordance with applicable standards (e.g. ISO 9001, IATF 16949)

• Assist in document control activities, including creation, revision, distribution, and archival of controlled documents.

• Ensure quality records are properly maintained, traceable, and readily accessible.

• Assist in raising purchase order.

Audit Support

• Assist in planning and supporting audits.

• Track audit findings, action items, and closure status.

• Support preparation of audit evidence and documentation.

Nonconformance & Corrective Action

• Assist in investigation of quality issues and root cause analysis.

• Track Corrective and Preventive Actions (CAPA) to ensure timely and effective closure.

Data & Reporting

• Collect, compile, and analyze quality data (e.g. audit results, CAPA status, KPIs).

• Prepare quality reports and dashboards for management review.

• Maintain quality performance metrics and trend analysis.

Continuous Improvement

• Support quality improvement initiatives and projects.

• Participate in cross‑functional improvement activities.

Training & Awareness

• Support coordination of quality‑related training.

• Assist in maintaining training records and competency matrices.

• Promote quality awareness across the organization.

Requirements:

Nitec/Higher Nitec/Diploma in Mechanical, Materials, Electrical, Electronics Engineering, or a closely related discipline.

Able to work on 12 hours rotating shift.

Attention to details to ensure accuracy and compliance in documentation, reporting, and execution of tasks.

Familiar with AI tools such as Python, Power Automate, Power Apps, Power BI and Tableau

Familiar with engineering principles, quality systems such as Failure Mode and Effect Analysis (FMEA), Change Management, Measurement System Analysis, Calibration and other quality and statistical methods and tools will be advantageous

Exhibit Micron Values (People, Innovation, Tenacity, Collaboration and Customer Focus)

Self‑driven and able to work independently with strong ownership.

Effective at prioritizing and problem‑solving in fast‑paced environments.

Clear, confident communicator with strong stakeholder influence.

Collaborative team player who works well across functions. ​

Structured thinking and data-driven approaches to identify root causes and implement sustainable solutions.

Assists engineers in testing and inspecting products at various stages of the production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products. Implements methods and procedures for inspecting, testing, and evaluating products, processes and/or production equipment. Report such data to management and production engineering so problematic areas may be addressed.

We are seeking dedicated cleaning operations manager to join our team.

Contact HR @ 91383851 for interview

Pre-requisite:
1. MUST have pest control background (most preferred)
2. MUST have cleaning experience
3. Degree Holder the those without are welcomed to apply too
4. Ability to work without supervision.

Work Timing: 8am to 5pm
Work days: 5.5 Days
Work Location: Island Wide

Job Description:
1. To manage customer expectations and provide solutions
2. To ensure company SOPs and standards are aligned to all project sites.
3. Recruitment
4. To manage the P&L for each project
5. To ensure all sites are pest free.
6. To develop a good working relationship with customers

Contact HR @ 91383851 for interview

ABOUT SIOUX
Sioux is a strategic high-tech solutions provider that develops, innovates and assembles complex high-tech systems
We have a team of over 1,200 dedicated engineers who either support our clients or serve as their Research and Development department. Our strong productivity allows us to speed up product development, giving our clients a competitive edge at a better cost-effectiveness.
As a rapidly growing employer, Sioux values its employees' growth and well-being. We invest in their career development and foster a positive work environment that promotes personal and professional growth.

SIOUX IN SINGAPORE

Sioux Singapore plays a pivotal role in the Asian market by offering R&D services from our centers across Europe and Asia to customers, leading development teams in Asia, from Singapore

This expansion allows us to meet the changing needs of our domestic and international (OEM) customers in the semiconductor, analytical, and medical industries.

THE ROLE

As a Motion Control Engineer at Sioux Singapore, you are responsible for the design, development, and optimization of motion control systems for high-precision equipment used in the semiconductor, analytical, and medical industries. You will be part of a multidisciplinary team and work closely with system architects, software engineers, and mechanical designers to deliver reliable and performant motion solutions.

On this career trajectory, you can advance into the role of a lead engineer or system architect in line with the impact and independence of your individual contributions to the team that you are guiding.

Your responsibilities include:

• Designing and implementing motion control algorithms for precision positioning systems (e.g. servo drives, linear motors, piezo stages).
• Translating system-level performance requirements into motion subsystem specifications and control strategies.
• Selecting and integrating motion hardware: servo drives, amplifiers, encoders, and actuators.
• Developing and tuning PID and feed-forward controllers, as well as advanced control strategies such as model-based control and iterative learning control.
• Collaborating with mechanical and electrical engineers to ensure seamless integration of motion systems.
• Performing dynamic modelling and simulation of motion systems using MATLAB/Simulink or equivalent.
• Conducting system-level testing, commissioning, and troubleshooting of motion control systems on-site and at customer locations.
• Conducting peer reviews to ensure product quality.

THE JOB SCOPE

Technically, the job scope comprises the engineering of high-precision motion systems covering the full motion control stack, from low-level drive configuration and real-time control to high-level supervisory and diagnostics software.

In particular, the job scope covers the following:

Real-time motion control implementation using platforms such as Beckhoff TwinCAT, Siemens SIMOTION, or equivalent EtherCAT-based systems. Hardware abstraction and driver integration for servo drives (e.g. Beckhoff, Siemens, Yaskawa), encoders (linear and rotary), and fieldbus interfaces (EtherCAT, PROFINET, CANopen).

Development of device-level and domain-level control logic, including state machines and sequencing for multi-axis coordinated motion.

Implementation of application-layer features such as recipe management, calibration routines, and position error compensation.

Integration and commissioning of motion systems at customer sites.

Creating detailed functional design specifications (FDS), motion system analyses, and test reports.

JOB REQUIREMENTS

Qualifications and Experience

A technical background with a university education in Mechanical Engineering, Electrical Engineering, Mechatronics, Control Engineering, or a related field.

Minimum 3–5 years of hands-on experience in motion control system design and development in a high-tech or industrial environment.

Proven experience with servo drive systems, motion controllers, and real-time control platforms (e.g. Beckhoff TwinCAT, Siemens SIMOTION, National Instruments, or equivalent).

Strong knowledge of control theory: PID tuning, feed-forward control, frequency-domain analysis, and system identification.

Experience with dynamic modelling and simulation tools such as MATLAB/Simulink.

Familiarity with industrial communication protocols: EtherCAT, PROFINET, CANopen, or Modbus.

Experience in the semiconductor, analytical instruments, or medical device industry is a strong advantage.

Programming experience in C, C++, Python, or IEC 61131-3 (Structured Text, Ladder Logic).

Desirable Skill Set

Experience with precision positioning systems (sub-micron accuracy), wafer handling, or lithography stages. Knowledge of vibration analysis, structural dynamics, and active vibration isolation.

Familiarity with machine safety standards (ISO 13849, IEC 62061, IEC 61508).

Experience with robotics, collaborative robots (cobots), or multi-axis gantry systems.

Knowledge of Industry 4.0, digital twin technologies, and condition monitoring.

Proficiency in CAD software (e.g. SolidWorks) for mechanical integration reviews.

Experience working within Agile Scrum or Kanban teams. Worked with version control systems such as Git (GitLab, GitHub, Bitbucket).

Desirable Soft Skills

A preference for autonomy and responsibility in organizing your own work.

Good communication skills and ability to work effectively within a geographically distributed team.

A pro-active attitude with a focus on continuous improvement.

Good leadership skills are preferable.

WHAT WE CAN OFFER

Our employees are our strength and together we want to achieve the maximum. That is why we invest a lot in our employees, through generous development budgets and personal attention. According to our employees, this is what makes the difference at Sioux. We are proud of that. For us, success is more than just a good salary: it is also about feeling valued, getting responsibilities, and to be able continuously develop oneself.

• Internal training, coaching, and a generous development budget of 5000 SGD/ per year

• Varied work due to the diversity in technologies, markets, and projects

• Competitive salary, AWS, and variable bonus

• An open culture that focuses on collaboration, learning, and having fun

• An innovative work environment

Job Location

Our office is conveniently located next to the Tai Seng MRT station.

We are seeking a Design Quality Engineer to support the development and qualification of semiconductor equipment. This role focuses on test planning, reliability validation, and data analysis to ensure high product performance and quality.

Key Responsibilities

• Develop and execute test plans to qualify new designs based on intended customer use cases
• Design and implement Accelerated Life Testing (ALT) and stress tests for high-value components
• Perform statistical analysis of test and reliability data; prepare reports and summaries
• Evaluate component quality and collaborate closely with suppliers on quality improvements
• Conduct root cause analysis and troubleshooting in coordination with engineering teams
• Ensure all defects identified during qualification testing are properly logged and tracked through to corrective action closure
• Maintain 5S standards within the ALT laboratory environment
• Perform routine safety checks and maintenance of lab equipment and instruments

Requirements

• Bachelor’s degree in Electrical, Electronics, Instrumentation, or Mechanical Engineering
• Minimum 3 years of experience in a semiconductor or related high-tech manufacturing environment
• Strong knowledge of qualification test planning, test instrumentation, and problem-solving methodologies
• Solid background in statistical analysis (e.g., DOE, Cpk, t-test, regression, reliability analysis)
• Proactive and results-oriented, with the ability to work independently and adapt in a fast-paced environment
• Proficiency in Minitab and Microsoft Office (Word, Excel, PowerPoint, Outlook)
• Good communication and interpersonal skills

Business Development Executive - Automation System Control

• Work Location: Joo Seng Road, Singapore
• Working Hours: Mon – Fri 8.30am – 5.30pm
• Monthly Salary: Base up to $4500 + Allowance + Commission +VB
• Employment Type: Full time, Permanent Contract

Company Overview

The company is a well‑established organization with a growing presence in both local and international markets. Recognized for the company’s commitment to innovation, quality, and reliability, the company delivers effective solutions across diverse industries and continue to build trusted partnerships worldwide.

Responsibility

• Drive business growth by expanding key accounts across Oil & Gas, Pharmaceutical, and other industrial sectors in Singapore.
• Provide technical sales consultation and support, promoting electrical solutions and strengthening market presence.
• Manage the full sales cycle, including quotations, order closures, submittals, and issue resolution.
• Consistently achieve or exceed sales and margin targets through effective account management and business development.
• Assess client requirements, gather market intelligence, and shape sales strategies to stay competitive.
• Build and maintain strong, long‑term relationships with stakeholders at all levels within client organizations.

Requirements

• Diploma in Electrical Engineering or equivalent which is recognized by the relevant authority.
• Minimum 1 year of proven sales experience to industry customers
• Strong interpersonal and communication skills
• Access to own/rent a personal vehicle for work-related travel
• Candidate who can start immediately or within short notice will be preferred

We regret to inform you that only shortlisted applicants will be notified.
Recruit Lync Pte Ltd | EA License Number: 22C1000
Chen Hoe Nam | EA Personnel License: R25158678

(Automation System Control) Business Development Executive

• Work Location: Joo Seng Road, Singapore
• Working Hours: Mon – Fri 8.30am – 5.30pm
• Monthly Salary: Base up to $4500 + Allowance + Commission +VB
• Employment Type: Full time, Permanent Contract

Company Overview

The company is a well‑established organization with a growing presence in both local and international markets. Recognized for the company’s commitment to innovation, quality, and reliability, the company delivers effective solutions across diverse industries and continue to build trusted partnerships worldwide.

Responsibility

• Drive business growth by expanding key accounts across Oil & Gas, Pharmaceutical, and other industrial sectors in Singapore.
• Provide technical sales consultation and support, promoting electrical solutions and strengthening market presence.
• Manage the full sales cycle, including quotations, order closures, submittals, and issue resolution.
• Consistently achieve or exceed sales and margin targets through effective account management and business development.
• Assess client requirements, gather market intelligence, and shape sales strategies to stay competitive.
• Build and maintain strong, long‑term relationships with stakeholders at all levels within client organizations.

Requirements

• Diploma in Electrical Engineering or equivalent which is recognized by the relevant authority.
• Minimum 1 year of proven sales experience to industry customers
• Strong interpersonal and communication skills
• Access to own/rent a personal vehicle for work-related travel
• Candidate who can start immediately or within short notice will be preferred

We regret to inform you that only shortlisted applicants will be notified.
Recruit Lync Pte Ltd | EA License Number: 22C1000
Chen Hoe Nam | EA Personnel License: R25158678

About the Role:

An exciting opportunity has arisen to join our Cloud Infrastructure Platform and Solutions (CIPS) Research Team. Our CIPS Research team is focussed on developing future technology systems to support growth in the rapidly evolving data center sector. The successful candidate will be directly involved in early-stage research projects, working with academic institutions, suppliers, customers, and partners to deliver proof of concept designs.

Key Responsibilities:

• Complete literature reviews and studies to explore existing and future control systems.
• Identify problems, future needs or market gaps to establish areas of further work.
• Design, model, and simulate advanced control algorithms for power converters, electric drives, and energy systems.
• Implement control software on embedded platforms (DSPs, MCUs, or FPGAs).
• Integrate real time diagnostics, fault detection and control loops with sensors, actuators and communication interfaces in real hardware to demonstrate feasibility.
• Write research reports, design guides, patents and performance reports.

Requirements:

• PhD or Master’s degree in Electrical / Electronic / Control Engineering or related field.
• Strong experience with control theory, digital control and signal processing.
• Understanding of common power electronic architectures (AC/DC, DC/AC, DC/DC, etc) and control methods.
• Knowledge of MATLAB/Simulink, embedded software (C/C++), architecture design and software version control.
• Solid understanding of microcontroller architectures, sensors, and communication protocols.
• Hands-on prototyping and testing experience using oscilloscopes, electronic loads and power analysers.
• Expertise in using simulation tools to aid the development and assessment of the proposed solution (MATLAB, Simulink, Python, LTspice, etc.)
• Strong analytical, problem-solving, and communication skills.
• Demonstrated passion for innovation and commitment to continuous learning.
• We welcome applicants at all experience levels, from recent graduates to seasoned professionals.

Why Join Us

• Work in a world-class R&D environment with well-equipped labs, top-tier industry connections and collaborative teams.
• Shape the future of energy-efficient data storage and AI cloud computing – from renewable energy integration to next generation infrastructure.
• Opportunities to publish, patent and innovate designs for future products.
• Competitive compensation, research autonomy and a continuous learning culture.

About the Role:

An exciting opportunity has arisen to join our Cloud Infrastructure Platform and Solutions (CIPS) Research Team. Our CIPS Research team is focussed on developing future technology systems to support growth in the rapidly evolving data center industry. The successful candidate will be directly involved in early-stage research projects, working with academic institutions, suppliers, customers, and partners to deliver proof of concept designs.

Key Responsibilities:

• Monitor market trends and research to identify breakthrough opportunities in power converter topologies and control schemes for data centers.
• Drive technical excellence across design, modelling, simulation, prototyping and performance testing of new power conversion topologies, control schemes and components.
• Oversee critical design reviews and own technical project direction.
• Represent the company as a subject matter expert when engaging with suppliers, customers, and partners.
• Help to create, review and improve research project processes, from idea creation to project transfer deliverables.
• Identify the skills needed in the team and support recruitment of suitable engineers.
• Work with a commitment to continuous improvement, transparency, and technical expertise.
• Work as a hands-on individual contributor, researching key topics and delivering ideas, designs, and documentation.

Requirements:

• PhD or Master’s degree in Electrical / Electronic / Control Engineering or related field.
• 8+ years’ experience with control theory, digital control and signal processing.
• Strong understanding of common power electronic architectures (DC/AC, DC/DC, etc) and control methods.
• Expertise of MATLAB/Simulink, embedded software (C/C++), architecture design and software version control.
• Solid understanding of microcontroller architectures, sensors, and communication protocols.
• Hands-on prototyping and testing experience using oscilloscopes, electronic loads and power analysers.
• Expertise in using simulation tools to aid the development and assessment of the proposed solution (MATLAB, Simulink, Python, LTspice, etc).
• Strong analytical, problem-solving, leadership and communication skills.
• Demonstrated passion for innovation and commitment to continuous learning.

Why Join Us

Work in a world-class R&D environment with well-equipped labs, top-tier industry connections and collaborative teams. Shape the future of energy-efficient data storage and AI cloud computing – from renewable energy integration to next-generation infrastructure. Opportunities to publish, patent and innovate designs for future products. Competitive compensation, research autonomy and a continuous learning culture.

About the Role:

An exciting opportunity has arisen to join our Cloud Infrastructure Platform and Solutions (CIPS) Research Team. Our CIPS Research team is focussed on developing future technology systems to support growth in the rapidly evolving data center industry. The successful candidate will be directly involved in early-stage research projects, working with academic institutions, suppliers, customers, and partners to deliver proof of concept designs.

Key Responsibilities:

• Monitor market trends and research to identify breakthrough opportunities in power converter topologies and control schemes for data centers.
• Drive technical excellence across design, modelling, simulation, prototyping and performance testing of new power conversion topologies, control schemes and components.
• Oversee critical design reviews and own technical project direction.
• Represent the company as a subject matter expert when engaging with suppliers, customers, and partners.
• Help to create, review and improve research project processes, from idea creation to project transfer deliverables.
• Identify the skills needed in the team and support recruitment of suitable engineers.
• Work with a commitment to continuous improvement, transparency, and technical expertise.
• Work as a hands-on individual contributor, researching key topics and delivering ideas, designs, and documentation.

Requirements:

• PhD or Master’s degree in Electrical / Electronic / Control Engineering or related field.
• 5+ years’ experience with control theory, digital control and signal processing.
• Strong understanding of common power electronic architectures (DC/AC, DC/DC, etc) and control methods.
• Expertise of MATLAB/Simulink, embedded software (C/C++), architecture design and software version control.
• Solid understanding of microcontroller architectures, sensors, and communication protocols.
• Hands-on prototyping and testing experience using oscilloscopes, electronic loads and power analysers.
• Expertise in using simulation tools to aid the development and assessment of the proposed solution (MATLAB, Simulink, Python, LTspice, etc).
• Strong analytical, problem-solving, leadership and communication skills.
• Demonstrated passion for innovation and commitment to continuous learning.

Why Join Us

Work in a world-class R&D environment with well-equipped labs, top-tier industry connections and collaborative teams. Shape the future of energy-efficient data storage and AI cloud computing – from renewable energy integration to next-generation infrastructure. Opportunities to publish, patent and innovate designs for future products. Competitive compensation, research autonomy and a continuous learning culture.

Position: Control Engineer
Salary range: Up to $5,500
Location: East

Job Responsibilities:

• PLC Programming; maintain, and troubleshoot PLC/SCADA systems
• Perform troubleshooting on Building Automation System / Building Management System
• Implement counter measure for equipment
• Assist in installation of control, Automation System etc
• Handle equipment program modification
• Carry out testing and commissioning
• Lead improvement project and activities.

Requirements:

• Diploma or Degree in Engineering
• With 3 - 5 years of experience
• With experience in PLC Engineering
• Preferably immediate/short notice

HOW TO APPLY:

By submitting any application or résumé to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only short-listed candidate will be notified.

Reg No: R1433814

EA License No: 20C0426 (Elitez & Associates)