Total 21 job vacancies in Singapore

Job Summary

The Quality Control Supervisor is responsible for overseeing all quality assurance and food safety activities in the food production facility. This role ensures that products meet company quality standards, customer specifications, regulatory requirements, and ISO 22000 Food Safety Management System (FSMS) standards. The supervisor monitors production processes, hygiene practices, documentation, corrective actions, and continuous improvement initiatives to ensure safe and high-quality food products are consistently produced.

Responsibilities:

• Supervise daily quality inspections for raw materials, processing, packaging, and finished products.
• Ensure compliance with product specifications, sensory standards, and food safety requirements.
• Conduct routine checks on product appearance, texture, moisture content, weight, labeling, and packaging integrity.
• Monitor Critical Control Points (CCPs) and Operational Prerequisite Programs (OPRPs) during production.
• Review and verify production records, batch records, and quality reports.
• Investigate product non-conformities, customer complaints, and quality incidents.
• Implement corrective and preventive actions (CAPA) to prevent recurrence of quality issues.
• Coordinate product sampling and laboratory testing when required.
• Ensure full compliance with ISO 22000 Food Safety Management System requirements.
• Maintain and monitor HACCP plans, hazard analysis, and risk assessments for food production processes.
• Ensure food safety documentation, SOPs, work instructions, and records are properly maintained and updated.
• Conduct internal audits and assist during external audits, certification audits, and regulatory inspections.
• Monitor traceability and product recall procedures to ensure readiness and compliance.
• Verify sanitation, cleaning, and pest control programs are effectively implemented.
• Ensure staff adherence to GMP (Good Manufacturing Practices), SSOP (Sanitation Standard Operating Procedures), and food safety protocols.
• Support continuous improvement initiatives related to food safety, hygiene, and operational efficiency.
• Work closely with Production Manager to ensure production processes meet quality and food safety standards.
• Monitor processing parameters such as packaging conditions.
• Ensure proper calibration and maintenance of measuring and inspection equipment.
• Assist in optimizing production efficiency while maintaining product quality standards.
• Ensure proper handling and storage of raw materials and finished products.

Requirements:

• Diploma or Degree in Food Science, Food Technology, Microbiology, Quality Assurance, or related field.
• Minimum 3–5 years of experience in food manufacturing quality control or food safety management.
• Experience in food production is preferred.
• Hands-on experience with ISO 22000, HACCP, GMP, and food safety audits.
• Strong knowledge of food safety regulations and ISO 22000 standards.
• Familiarity with HACCP principles and CCP monitoring.
• Good leadership, communication, and problem-solving skills.
• Strong attention to detail and documentation accuracy.
• Ability to work in a fast-paced food production environment.
• Proficiency in Microsoft Office and quality reporting systems.

Join Velocity Electronics as our next Quality Engineer in Singapore.

If you are driven to elevate quality standards and strengthen operational performance that support business success — we want to meet you.

What can you expect to do?

The Quality Engineer ensures product conforms to our customers’ requirements and assists with responding to customer concerns related to product quality in order to deliver exceptional experiences and outcomes.

You will be responsible for:

• Perform final quality control (QC) checks on inspected product to ensure it conforms to our customers’ requirements
• Provide training and technical support and assist with responding to customer concerns related to product quality
• Conduct internal QMS and ESD audit

In addition, you will:

• Review inspection results and, as needed, perform supplemental inspections on product to determine acceptability of product
• Document results of final QC checks in Velocity’s ERP system
• Communicate inspection findings to the Purchasing and Sales teams and advise on the actions necessary to resolve issues (if applicable)
• Coordinate with the Operations Manager to ensure Inspectors are performing inspections to standard
• Conduct inspection skills and technical trainings for quality inspectors
• Provide technical support to Sales and Purchasing Departments
• Assist the Quality Manager in Customer Corrective Action Request
• Perform other duties as requested by management

What is the experience and knowledge needed to be successful in this role?

Our ideal candidate is:

• Exceptional judgment
• Detail-oriented and thorough
• Strong written and verbal communication skills
• Problem solver
• Able to effectively coordinate and communicate with others
• Adaptable and flexible
• Able to work on several projects simultaneously
• Independent

Skills and Experience:

• Bachelor’s degree preferred; Diploma holders with relevant experience will also be considered
• Minimum 5 years of experience performing quality inspection on electronic components with demonstrated ability to make valid conformance decisions
• Expert product knowledge, experience working with complex ERP systems
• Understanding of basic math, including percentages and tolerances

This position will be located in our Singapore Office, APAC Regional Headquarters.

Please note that applicants must have the legal right to work in Singapore, as visa sponsorship is not available for this role.

Why Join Us

At Velocity Electronics, our core values—Be Amazing Today, Demonstrate Mutual Respect and Trust, Act Courageously, and Own Your Outcomes—drive our success.

If you thrive in a fast-paced, results-oriented environment and are motivated to exceed targets, you will be empowered to take ownership of your success, build meaningful relationships, and drive growth through innovative solutions.

Join a top independent electronic components distributor serving the world’s leading contract manufacturers and OEMs.

Job Description

We are seeking a Design Quality Engineer to support the development and qualification of semiconductor equipment, with a focus on test planning, reliability validation, and data analysis to ensure high product performance and quality.

Key Responsibilities

• Develop and execute qualification test plans to validate new product designs based on customer use cases
• Design and implement Accelerated Life Testing (ALT) and stress tests for high-value components
• Perform statistical analysis on test and reliability data (e.g., DOE, Cpk, regression) and prepare technical reports
• Evaluate component and system-level quality; work closely with suppliers to drive quality improvements
• Conduct root cause analysis and troubleshooting in collaboration with engineering teams
• Ensure all defects identified during testing are logged, tracked, and resolved through corrective actions
• Maintain 5S standards and ensure proper lab safety, equipment maintenance, and calibration

Job Requirements

• Bachelor’s Degree in Electrical, Electronics, Instrumentation, Mechanical Engineering, or related field
• Minimum 3 years of experience in semiconductor or high-tech manufacturing environment
• Strong knowledge of qualification test planning, test instrumentation, and problem-solving methodologies
• Experience in statistical analysis (DOE, Cpk, t-test, regression, reliability analysis)
• Proficient in Minitab and Microsoft Office (Excel, Word, PowerPoint)
• Independent, proactive, and able to work in a fast-paced environment
• Strong communication and interpersonal skills

• Up till $2800 basic + Variable Bonus

• Established Local Food Producer

• Hands-On Quality & Food Safety Exposure

• Career Development Opportunities

• 5 days, Monday to Friday, 9am to 6pm

Our client, an established poultry and egg producer in Singapore, is inviting qualified candidates to join as a Quality Control Executive (Food).

RESPONSIBILITIES:

• Monitor and verify that food production activities adhere to food safety guidelines, product specifications, and applicable regulatory requirements.

• Assist in establishing, implementing, and maintaining food safety management systems such as ISO 22000, FSSC 22000, Halal, and relevant authority standards.

• Perform regular checks on production lines and processes to ensure standards are consistently met, including in-process product inspections.

• Support regulatory body reviews, customer audits, and site visits, including following up on corrective actions and documentation as needed.

• Report any deviations or non-compliance in products or processes promptly to supervisors or management.

• Carry out additional responsibilities and special tasks as assigned.

REQUIREMENTS:

• No prior experience needed; on-the-job training will be provided.

• Comfortable working in cold storage/production areas (10–15°C)

• Attention to detail, reliability, and willingness to learn.

• Preferably a Diploma in Food Science, Food Technology or equivalent.

• Preferably knowledgeable in local C international food safety standards.

OTHER INFORMATION:

• Location                                 : Buroh Lane

• Working Days/Hours           : 5 days, Monday to Friday, 9am to 6pm

• Salary                                      : Up till $2800 basic + Variable Bonus

The Company strives to achieve employee satisfaction and provides conducive working environment, attractive incentives and remuneration to all staff.

Please indicate the below information in your resume:

• Current & Expected salary

• Reason(s) for leaving

• Availability to commence work

We regret only shortlisted candidate will be notified. All applications will be treated with the strictest confidence.

1. Nature of Engagement & Requirements

• Remote working arrangement except when need to head down for QC
• Flexible working hours (no fixed schedule)
• Responsible for outcomes and quality oversight of assigned students, coaches, and client experience
• Have swim coach background
• Have customer service experience
• Have team managerial experinence

2. Compensation Structure

Monthly Stipend (Fixed)

• $1,000 per month

• Covers all core responsibilities listed in Section 3

Monthly Performance Bonus (Up to $800)

• Bonus is paid monthly based on achievement of key outcomes:

A. Student Retention Performance – $400

• $400 payable if monthly retention rate is ≥ 98%

• 0 payout if < 98%

B. Service Quality / Escalations – $400

• $400 payable if 2 or fewer escalated cases in the month

• 0 payout if > 2 escalations

Bonus Eligibility Condition - Bonus is only payable if the Contractor has:

• Fulfilled all core responsibilities in Section 3

• Maintained timely and satisfactory execution of duties throughout the month

3. Core Responsibilities (Covered under $1,000 stipend)

A. Lesson Quality & Coaching Oversight

• Conduct minimum 3 quality check (QC) observations per week

• Observe lessons and assess teaching quality, student progress, and adherence to SOP

• Engage with parents/students for feedback or concerns

• Provide feedback and follow-up with coaches after observations/gathering feedback

B. Coach Management

• Engage regularly with coaches to ensure:

• SOP compliance - e.g. Highlight frequent/late cancellations or no shows

• Proper student progression

• Consistent lesson quality

• Communicate updates, reminders, and operational changes to coaches

C. Student Progress & Parent Engagement

• Understand goals and needs of students

• Proactively conduct follow-ups for at least 14 students per week - check in & update on progress after engaging with coach

• Maintain communication with parents regarding progress/feedback where necessary

• Manage SwimSafer test registration process & post-test outcomes

D. Escalation Handling

• Receive escalations from admin or coaches regarding:

• Lesson quality issues

• Parent dissatisfaction

• Coach-related concerns, etc

• Assess and intervene where necessary to resolve issues professionally

E. Student Transition Plan

• Plan smooth hand-over of students from one coach to another when needed

• Ensure satisfaction through the hand-over and follow up after transition is complete

E. Administration Oversight

• Supervise admin support staff

• Assign and review administrative tasks when required

• Ensure administrative accuracy and timeliness in execution of duties

F. Reporting

• Submit weekly summary report, including:

• Student progress updates

• Issues / escalations & outcomes

• Coach performance observations

• Key risks or concerns

• Terminations & reasons

H. Retention & Service Improvement

• Monitor reasons for student termination

• Identify patterns and propose improvements to enhance retention and service quality

4. Working Style Expectations

• Remote and flexible working arrangement

• Expected to respond within reasonable timeframes for escalations and operational matters

• Focus is on outcomes, consistency, and service quality rather than hours worked

5. Key Performance Indicators (Monthly)

• ≥ 98% student retention rate

• ≤ 2 escalated cases

• Minimum QC sessions completed weekly

• Minimum student follow-ups completed weekly

• Timely submission of weekly reports 

Job Summary:

Minimizes financial risk to the company by investigating and evaluating new and existing customers' creditworthiness and analyzes credit risk. Researches and resolves billing disputes. Recommends and/or implements credit extensions, revocations or collections referrals.

Principal Responsibilities:

• Researches and verifies credit data on customers to establish or update lines of credit.

• Assesses, recommends and/or approves credit limits.

• Investigates and resolves customer invoice disputes to facilitate payment from, or issuance of, credit to customer.

• Reviews customer accounts for aging of unpaid balances and pending orders, solicits payments on overdue accounts, places delinquent accounts on ‘hold’ status until payment arrangements are secured, determines payment plans/schedules.

• Follows up on payment arrangements and recommends transfer of outstanding customer accounts to collection agencies.

• Develops and maintains relationships with outside credit and/or collection agencies.

• Maintains a variety of files and records associated with delinquent accounts, incomplete files and credit risks.

• Maintains and updates electronic and/or hard copy files in a timely and accurate manner.

• Other duties as assigned.

Job Level Specifications:

• Extensive knowledge of the organization, job, practices and procedures, enabling a high level of contribution.

• Completes complex assignments requiring significant judgment, initiative and problem solving skills.

• Work is performed under minimal guidance and assigned in the form of desired expectations. Independent judgment is used to determine best approach and creativity is expected to achieve maximum results and handle new situations.

• Collaboration with internal or external contacts. May participate on teams for special assignments. Responds to requests from senior management, internal and/or external contacts.

• Actions may have significant impact to department as well as others. Errors may be difficult to detect and remedy and potentially result in loss of customer business, materials, money and/or time.

Work Experience:

• Typically requires a minimum of two years of related experience.

ABOUT SIOUX
Sioux is a strategic high-tech solutions provider that develops, innovates and assembles complex high-tech systems
We have a team of over 1,200 dedicated engineers who either support our clients or serve as their Research and Development department. Our strong productivity allows us to speed up product development, giving our clients a competitive edge at a better cost-effectiveness.
As a rapidly growing employer, Sioux values its employees' growth and well-being. We invest in their career development and foster a positive work environment that promotes personal and professional growth.

SIOUX IN SINGAPORE

Sioux Singapore plays a pivotal role in the Asian market by offering R&D services from our centers across Europe and Asia to customers, leading development teams in Asia, from Singapore

This expansion allows us to meet the changing needs of our domestic and international (OEM) customers in the semiconductor, analytical, and medical industries.

THE ROLE

As a Motion Control Engineer at Sioux Singapore, you are responsible for the design, development, and optimization of motion control systems for high-precision equipment used in the semiconductor, analytical, and medical industries. You will be part of a multidisciplinary team and work closely with system architects, software engineers, and mechanical designers to deliver reliable and performant motion solutions.

On this career trajectory, you can advance into the role of a lead engineer or system architect in line with the impact and independence of your individual contributions to the team that you are guiding.

Your responsibilities include:

• Designing and implementing motion control algorithms for precision positioning systems (e.g. servo drives, linear motors, piezo stages).
• Translating system-level performance requirements into motion subsystem specifications and control strategies.
• Selecting and integrating motion hardware: servo drives, amplifiers, encoders, and actuators.
• Developing and tuning PID and feed-forward controllers, as well as advanced control strategies such as model-based control and iterative learning control.
• Collaborating with mechanical and electrical engineers to ensure seamless integration of motion systems.
• Performing dynamic modelling and simulation of motion systems using MATLAB/Simulink or equivalent.
• Conducting system-level testing, commissioning, and troubleshooting of motion control systems on-site and at customer locations.
• Conducting peer reviews to ensure product quality.

THE JOB SCOPE

Technically, the job scope comprises the engineering of high-precision motion systems covering the full motion control stack, from low-level drive configuration and real-time control to high-level supervisory and diagnostics software.

In particular, the job scope covers the following:

Real-time motion control implementation using platforms such as Beckhoff TwinCAT, Siemens SIMOTION, or equivalent EtherCAT-based systems. Hardware abstraction and driver integration for servo drives (e.g. Beckhoff, Siemens, Yaskawa), encoders (linear and rotary), and fieldbus interfaces (EtherCAT, PROFINET, CANopen).

Development of device-level and domain-level control logic, including state machines and sequencing for multi-axis coordinated motion.

Implementation of application-layer features such as recipe management, calibration routines, and position error compensation.

Integration and commissioning of motion systems at customer sites.

Creating detailed functional design specifications (FDS), motion system analyses, and test reports.

JOB REQUIREMENTS

Qualifications and Experience

A technical background with a university education in Mechanical Engineering, Electrical Engineering, Mechatronics, Control Engineering, or a related field.

Minimum 3–5 years of hands-on experience in motion control system design and development in a high-tech or industrial environment.

Proven experience with servo drive systems, motion controllers, and real-time control platforms (e.g. Beckhoff TwinCAT, Siemens SIMOTION, National Instruments, or equivalent).

Strong knowledge of control theory: PID tuning, feed-forward control, frequency-domain analysis, and system identification.

Experience with dynamic modelling and simulation tools such as MATLAB/Simulink.

Familiarity with industrial communication protocols: EtherCAT, PROFINET, CANopen, or Modbus.

Experience in the semiconductor, analytical instruments, or medical device industry is a strong advantage.

Programming experience in C, C++, Python, or IEC 61131-3 (Structured Text, Ladder Logic).

Desirable Skill Set

Experience with precision positioning systems (sub-micron accuracy), wafer handling, or lithography stages. Knowledge of vibration analysis, structural dynamics, and active vibration isolation.

Familiarity with machine safety standards (ISO 13849, IEC 62061, IEC 61508).

Experience with robotics, collaborative robots (cobots), or multi-axis gantry systems.

Knowledge of Industry 4.0, digital twin technologies, and condition monitoring.

Proficiency in CAD software (e.g. SolidWorks) for mechanical integration reviews.

Experience working within Agile Scrum or Kanban teams. Worked with version control systems such as Git (GitLab, GitHub, Bitbucket).

Desirable Soft Skills

A preference for autonomy and responsibility in organizing your own work.

Good communication skills and ability to work effectively within a geographically distributed team.

A pro-active attitude with a focus on continuous improvement.

Good leadership skills are preferable.

WHAT WE CAN OFFER

Our employees are our strength and together we want to achieve the maximum. That is why we invest a lot in our employees, through generous development budgets and personal attention. According to our employees, this is what makes the difference at Sioux. We are proud of that. For us, success is more than just a good salary: it is also about feeling valued, getting responsibilities, and to be able continuously develop oneself.

• Internal training, coaching, and a generous development budget of 5000 SGD/ per year

• Varied work due to the diversity in technologies, markets, and projects

• Competitive salary, AWS, and variable bonus

• An open culture that focuses on collaboration, learning, and having fun

• An innovative work environment

Job Location

Our office is conveniently located next to the Tai Seng MRT station.

We are seeking a Design Quality Engineer to support the development and qualification of semiconductor equipment. This role focuses on test planning, reliability validation, and data analysis to ensure high product performance and quality.

Key Responsibilities

• Develop and execute test plans to qualify new designs based on intended customer use cases
• Design and implement Accelerated Life Testing (ALT) and stress tests for high-value components
• Perform statistical analysis of test and reliability data; prepare reports and summaries
• Evaluate component quality and collaborate closely with suppliers on quality improvements
• Conduct root cause analysis and troubleshooting in coordination with engineering teams
• Ensure all defects identified during qualification testing are properly logged and tracked through to corrective action closure
• Maintain 5S standards within the ALT laboratory environment
• Perform routine safety checks and maintenance of lab equipment and instruments

Requirements

• Bachelor’s degree in Electrical, Electronics, Instrumentation, or Mechanical Engineering
• Minimum 3 years of experience in a semiconductor or related high-tech manufacturing environment
• Strong knowledge of qualification test planning, test instrumentation, and problem-solving methodologies
• Solid background in statistical analysis (e.g., DOE, Cpk, t-test, regression, reliability analysis)
• Proactive and results-oriented, with the ability to work independently and adapt in a fast-paced environment
• Proficiency in Minitab and Microsoft Office (Word, Excel, PowerPoint, Outlook)
• Good communication and interpersonal skills

Business Development Executive - Automation System Control

• Work Location: Joo Seng Road, Singapore
• Working Hours: Mon – Fri 8.30am – 5.30pm
• Monthly Salary: Base up to $4500 + Allowance + Commission +VB
• Employment Type: Full time, Permanent Contract

Company Overview

The company is a well‑established organization with a growing presence in both local and international markets. Recognized for the company’s commitment to innovation, quality, and reliability, the company delivers effective solutions across diverse industries and continue to build trusted partnerships worldwide.

Responsibility

• Drive business growth by expanding key accounts across Oil & Gas, Pharmaceutical, and other industrial sectors in Singapore.
• Provide technical sales consultation and support, promoting electrical solutions and strengthening market presence.
• Manage the full sales cycle, including quotations, order closures, submittals, and issue resolution.
• Consistently achieve or exceed sales and margin targets through effective account management and business development.
• Assess client requirements, gather market intelligence, and shape sales strategies to stay competitive.
• Build and maintain strong, long‑term relationships with stakeholders at all levels within client organizations.

Requirements

• Diploma in Electrical Engineering or equivalent which is recognized by the relevant authority.
• Minimum 1 year of proven sales experience to industry customers
• Strong interpersonal and communication skills
• Access to own/rent a personal vehicle for work-related travel
• Candidate who can start immediately or within short notice will be preferred

We regret to inform you that only shortlisted applicants will be notified.
Recruit Lync Pte Ltd | EA License Number: 22C1000
Chen Hoe Nam | EA Personnel License: R25158678

(Automation System Control) Business Development Executive

• Work Location: Joo Seng Road, Singapore
• Working Hours: Mon – Fri 8.30am – 5.30pm
• Monthly Salary: Base up to $4500 + Allowance + Commission +VB
• Employment Type: Full time, Permanent Contract

Company Overview

The company is a well‑established organization with a growing presence in both local and international markets. Recognized for the company’s commitment to innovation, quality, and reliability, the company delivers effective solutions across diverse industries and continue to build trusted partnerships worldwide.

Responsibility

• Drive business growth by expanding key accounts across Oil & Gas, Pharmaceutical, and other industrial sectors in Singapore.
• Provide technical sales consultation and support, promoting electrical solutions and strengthening market presence.
• Manage the full sales cycle, including quotations, order closures, submittals, and issue resolution.
• Consistently achieve or exceed sales and margin targets through effective account management and business development.
• Assess client requirements, gather market intelligence, and shape sales strategies to stay competitive.
• Build and maintain strong, long‑term relationships with stakeholders at all levels within client organizations.

Requirements

• Diploma in Electrical Engineering or equivalent which is recognized by the relevant authority.
• Minimum 1 year of proven sales experience to industry customers
• Strong interpersonal and communication skills
• Access to own/rent a personal vehicle for work-related travel
• Candidate who can start immediately or within short notice will be preferred

We regret to inform you that only shortlisted applicants will be notified.
Recruit Lync Pte Ltd | EA License Number: 22C1000
Chen Hoe Nam | EA Personnel License: R25158678

About the Role:

An exciting opportunity has arisen to join our Cloud Infrastructure Platform and Solutions (CIPS) Research Team. Our CIPS Research team is focussed on developing future technology systems to support growth in the rapidly evolving data center sector. The successful candidate will be directly involved in early-stage research projects, working with academic institutions, suppliers, customers, and partners to deliver proof of concept designs.

Key Responsibilities:

• Complete literature reviews and studies to explore existing and future control systems.
• Identify problems, future needs or market gaps to establish areas of further work.
• Design, model, and simulate advanced control algorithms for power converters, electric drives, and energy systems.
• Implement control software on embedded platforms (DSPs, MCUs, or FPGAs).
• Integrate real time diagnostics, fault detection and control loops with sensors, actuators and communication interfaces in real hardware to demonstrate feasibility.
• Write research reports, design guides, patents and performance reports.

Requirements:

• PhD or Master’s degree in Electrical / Electronic / Control Engineering or related field.
• Strong experience with control theory, digital control and signal processing.
• Understanding of common power electronic architectures (AC/DC, DC/AC, DC/DC, etc) and control methods.
• Knowledge of MATLAB/Simulink, embedded software (C/C++), architecture design and software version control.
• Solid understanding of microcontroller architectures, sensors, and communication protocols.
• Hands-on prototyping and testing experience using oscilloscopes, electronic loads and power analysers.
• Expertise in using simulation tools to aid the development and assessment of the proposed solution (MATLAB, Simulink, Python, LTspice, etc.)
• Strong analytical, problem-solving, and communication skills.
• Demonstrated passion for innovation and commitment to continuous learning.
• We welcome applicants at all experience levels, from recent graduates to seasoned professionals.

Why Join Us

• Work in a world-class R&D environment with well-equipped labs, top-tier industry connections and collaborative teams.
• Shape the future of energy-efficient data storage and AI cloud computing – from renewable energy integration to next generation infrastructure.
• Opportunities to publish, patent and innovate designs for future products.
• Competitive compensation, research autonomy and a continuous learning culture.

About the Role:

An exciting opportunity has arisen to join our Cloud Infrastructure Platform and Solutions (CIPS) Research Team. Our CIPS Research team is focussed on developing future technology systems to support growth in the rapidly evolving data center industry. The successful candidate will be directly involved in early-stage research projects, working with academic institutions, suppliers, customers, and partners to deliver proof of concept designs.

Key Responsibilities:

• Monitor market trends and research to identify breakthrough opportunities in power converter topologies and control schemes for data centers.
• Drive technical excellence across design, modelling, simulation, prototyping and performance testing of new power conversion topologies, control schemes and components.
• Oversee critical design reviews and own technical project direction.
• Represent the company as a subject matter expert when engaging with suppliers, customers, and partners.
• Help to create, review and improve research project processes, from idea creation to project transfer deliverables.
• Identify the skills needed in the team and support recruitment of suitable engineers.
• Work with a commitment to continuous improvement, transparency, and technical expertise.
• Work as a hands-on individual contributor, researching key topics and delivering ideas, designs, and documentation.

Requirements:

• PhD or Master’s degree in Electrical / Electronic / Control Engineering or related field.
• 8+ years’ experience with control theory, digital control and signal processing.
• Strong understanding of common power electronic architectures (DC/AC, DC/DC, etc) and control methods.
• Expertise of MATLAB/Simulink, embedded software (C/C++), architecture design and software version control.
• Solid understanding of microcontroller architectures, sensors, and communication protocols.
• Hands-on prototyping and testing experience using oscilloscopes, electronic loads and power analysers.
• Expertise in using simulation tools to aid the development and assessment of the proposed solution (MATLAB, Simulink, Python, LTspice, etc).
• Strong analytical, problem-solving, leadership and communication skills.
• Demonstrated passion for innovation and commitment to continuous learning.

Why Join Us

Work in a world-class R&D environment with well-equipped labs, top-tier industry connections and collaborative teams. Shape the future of energy-efficient data storage and AI cloud computing – from renewable energy integration to next-generation infrastructure. Opportunities to publish, patent and innovate designs for future products. Competitive compensation, research autonomy and a continuous learning culture.

About the Role:

An exciting opportunity has arisen to join our Cloud Infrastructure Platform and Solutions (CIPS) Research Team. Our CIPS Research team is focussed on developing future technology systems to support growth in the rapidly evolving data center industry. The successful candidate will be directly involved in early-stage research projects, working with academic institutions, suppliers, customers, and partners to deliver proof of concept designs.

Key Responsibilities:

• Monitor market trends and research to identify breakthrough opportunities in power converter topologies and control schemes for data centers.
• Drive technical excellence across design, modelling, simulation, prototyping and performance testing of new power conversion topologies, control schemes and components.
• Oversee critical design reviews and own technical project direction.
• Represent the company as a subject matter expert when engaging with suppliers, customers, and partners.
• Help to create, review and improve research project processes, from idea creation to project transfer deliverables.
• Identify the skills needed in the team and support recruitment of suitable engineers.
• Work with a commitment to continuous improvement, transparency, and technical expertise.
• Work as a hands-on individual contributor, researching key topics and delivering ideas, designs, and documentation.

Requirements:

• PhD or Master’s degree in Electrical / Electronic / Control Engineering or related field.
• 5+ years’ experience with control theory, digital control and signal processing.
• Strong understanding of common power electronic architectures (DC/AC, DC/DC, etc) and control methods.
• Expertise of MATLAB/Simulink, embedded software (C/C++), architecture design and software version control.
• Solid understanding of microcontroller architectures, sensors, and communication protocols.
• Hands-on prototyping and testing experience using oscilloscopes, electronic loads and power analysers.
• Expertise in using simulation tools to aid the development and assessment of the proposed solution (MATLAB, Simulink, Python, LTspice, etc).
• Strong analytical, problem-solving, leadership and communication skills.
• Demonstrated passion for innovation and commitment to continuous learning.

Why Join Us

Work in a world-class R&D environment with well-equipped labs, top-tier industry connections and collaborative teams. Shape the future of energy-efficient data storage and AI cloud computing – from renewable energy integration to next-generation infrastructure. Opportunities to publish, patent and innovate designs for future products. Competitive compensation, research autonomy and a continuous learning culture.

Automation System Control | Sales Engineer

• Work Location: Joo Seng Road, Singapore
• Working Hours: Mon – Fri 8.30am – 5.30pm
• Monthly Salary: Base up to $4500 + Allowance + Commission +VB
• Employment Type: Full time, Permanent Contract

Company Overview

The company is a well‑established organization with a growing presence in both local and international markets. Recognized for the company’s commitment to innovation, quality, and reliability, the company delivers effective solutions across diverse industries and continue to build trusted partnerships worldwide.

Responsibility

• Drive business growth by expanding key accounts across Oil & Gas, Pharmaceutical, and other industrial sectors in Singapore.
• Provide technical sales consultation and support, promoting electrical solutions and strengthening market presence.
• Manage the full sales cycle, including quotations, order closures, submittals, and issue resolution.
• Consistently achieve or exceed sales and margin targets through effective account management and business development.
• Assess client requirements, gather market intelligence, and shape sales strategies to stay competitive.
• Build and maintain strong, long‑term relationships with stakeholders at all levels within client organizations.

Requirements

• Diploma in Electrical Engineering or equivalent which is recognized by the relevant authority.
• Minimum 1 year of proven sales experience to industry customers
• Strong interpersonal and communication skills
• Access to own/rent a personal vehicle for work-related travel
• Candidate who can start immediately or within short notice will be preferred

We regret to inform you that only shortlisted applicants will be notified.
Recruit Lync Pte Ltd | EA License Number: 22C1000
Chen Hoe Nam | EA Personnel License: R25158678

1. Perform daily periodic checks of Central Kitchen to ensure compliance to in-house GMP/GHP standards, SOP, Product Specifications, etc.

2. Conduct random checks on incoming raw materials, and perform product cutting on raw materials to ensure goods received are within in-house specifications.

3. Ensure Process Verification and Validation exercise are completed (i.e. SOP/CCP verification, new product launch process observation, monthly facility checks, monthly traceability exercise, finished goods shelf-life verification, etc.)

4. Conduct investigations on product/process non-conformance (on-line and customer complaints) and follow-up on proposed corrective/preventive measures to ensure effectiveness.

5. Promptly follow-up with contractors (chemical/pest control) during routine servicing to ensure work orders are conducted as per contract.

6. Participate and engage in quality system implementation (audit activities by regulatory/certification bodies and customers).

7. Conduct data/trend analysis on non-conformity of raw material/finished goods, pest reporting statistics, monthly production and facility check statistics, etc. for process and quality improvement.

8. Ensure analysis of food products via microbiological and physical testing, calibration of lab equipment and measurement tools, internal sensory evaluation are conducted as per schedule.

9. Report all non-conformances, discrepancies and/or deviations, and follow-up on the investigation of the non-conformity results.

10. Other projects as assigned.

Sales Expert (Automation System Control)

• Work Location: Joo Seng Road, Singapore
• Working Hours: Mon – Fri 8.30am – 5.30pm
• Monthly Salary: Base up to $4500 + Allowance + Commission +VB
• Employment Type: Full time, Permanent Contract

Company Overview

The company is a well‑established organization with a growing presence in both local and international markets. Recognized for the company’s commitment to innovation, quality, and reliability, the company delivers effective solutions across diverse industries and continue to build trusted partnerships worldwide.

Responsibility

• Drive business growth by expanding key accounts across Oil & Gas, Pharmaceutical, and other industrial sectors in Singapore.
• Provide technical sales consultation and support, promoting electrical solutions and strengthening market presence.
• Manage the full sales cycle, including quotations, order closures, submittals, and issue resolution.
• Consistently achieve or exceed sales and margin targets through effective account management and business development.
• Assess client requirements, gather market intelligence, and shape sales strategies to stay competitive.
• Build and maintain strong, long‑term relationships with stakeholders at all levels within client organizations.

Requirements

• Diploma in Electrical Engineering or equivalent which is recognized by the relevant authority.
• Minimum 1 year of proven sales experience to industry customers
• Strong interpersonal and communication skills
• Access to own/rent a personal vehicle for work-related travel
• Candidate who can start immediately or within short notice will be preferred

We regret to inform you that only shortlisted applicants will be notified.
Recruit Lync Pte Ltd | EA License Number: 22C1000
Chen Hoe Nam | EA Personnel License: R25158678

ABOUT SIOUX 

Sioux is a strategic high-tech solutions provider that develops, innovates and assembles complex high-tech systems We have a team of over 1,200 dedicated engineers who either support our clients or serve as their Research and Development department. Our strong productivity allows us to speed up product development, giving our clients a competitive edge at a better cost-effectiveness. As a rapidly growing employer, Sioux values its employees' growth and well-being. We invest in their career development and foster a positive work environment that promotes personal and professional growth.

SIOUX IN SINGAPORE Sioux Singapore plays a pivotal role in the Asian market by offering R&D services from our centers across Europe and Asia to customers, leading development teams in Asia, from Singapore This expansion allows us to meet the changing needs of our domestic and international (OEM) customers in the semiconductor, analytical, and medical industries.

The Role 
Your role will involve developing equipment control software to support customers in the mentioned domains. Your responsibilities include:

• Collaborating with architects to define product architecture in your domain.
• Analyze customer needs in software requirement engineering
• Analyzing, designing, implementing, and test the control software.
• Conducting peer reviews to ensure product quality.
• Leading the small development team and ensuring team performance.
• Working as an integral part of a scrum team and handling user stories across the full stack.
• Developing functionality using Agile practices, emphasizing speed and quality.
• Leadership roles for higher positions

The Job Scope 
Develop testable quality code in C# for following machine control functionalities: WPF and WinForm UI develelopment

• Machine Control and Sequencing
• Hardware abstraction layer
• Subsystem / device communication and control
• System calibration and positional error measurement and compensation
• SECS/GEM functionalities.
• Lead scrum team technically though sprint planning, design review, merge request review, design/code refactoring activities.

Job requirements

QUALIFICATIONS AND EXPERIENCE

• A technical background with a higher professional or university education.
• Ideally, a background in the semiconductor, analytical, or medical domain.
• Experience in developing equipment control applications, including working with PC-based control, embedded controller, or motion controller
• Minimum 5 years of experience in C# in object-oriented programming, and UML tools
• Minimum 5 years in object-oriented analysis and design with common design patterns
• Minimum 5 years in active design refractoring with CleanCode/Solid princicple , and design refractoring with common design patterns
• Minimum 5 years leading Scrum development teams with requirement engineering, Sprints managements and technical design reviews

DESIRABLE SKILLSET

• Able to handle complex software solution
• Experience with C# Object-Oriented Analysis and Design (OOAD) and programming
• Experience with C# WPF, MVVM framework
• Experience with C# NUnit unit test framework
• Worked with Agile Scrum and Kanban team
• Worked with git workflow with online repositories like Gitlab, Github, Bitbucket etc
• Worked with git tools like SourceTree, TortoiseGit, GitKraken, Fork etc
• Worked with Continuous Integration tools

DESIRABLE SOFT SKILL

• A preference for autonomy and responsibility in organizing your work.
• Good communication skills and ability to work effectively within a geographically distributed team.
• For Senior positions, good leadership skills to lead a small team of 3-8 developers.

WHAT WE CAN OFFER

You will work within a pleasant working environment, in which High-Tech, High-Fun & High-Value are central.

• Competitive Compensation: Attractive salary, 13-month salary and performance bonus
• Hybrid Work Arrangement: Flexible working environment with 3 days in the office and 2 days of remote work per week, and flexible working hours.
• Comprehensive Healthcare: Inclusive healthcare coverage and annual health screening.
• Work-life balance with generous Leave: Up to 20 annual leave days and 10 company sick leave days without requiring a medical certificate.
• Education Budget: SGD 5,000 per year for training courses aimed at career development. We are committed to investing in your growth and development.

Job Location

Our office is conveniently located next to the Tai Seng MRT station.

Align with Acceleration — it's time to join a team that puts you first. We're hiring! Learn more today.

This is a fantastic opportunity to join a leading independent electronic components distributor to the world's leading contract manufacturers and OEMs. Built around the shared core values of Being amazing today, Demonstrating mutual respect and trust, Acting courageously and Owning our own outcomes, Velocity Electronics has experienced rapid growth and is looking to add to our talented global team. Our opportunity is massive! We offer career growth and development, and we want to talk to you!

WHAT WILL YOU BE DOING?

The Quality Inspector uses state-of-the-art tools and techniques to ensure that product conforms to applicable manufacturer’s specifications and our customers’ requirements. This position focuses on objective and instrumented tests that generate data for evaluation.

Core Responsibilities and Functions:

• Perform quality inspection on electronic components and related products
• Use advanced equipment and inspection methodology to confirm whether product meets customer requirements
• Record inspection results and evidence in Velocity’s ERP
• Take and prepare photo documentation
• Coordinate with the Quality Managers to ensure that all requested tests are performed
• Communicate and explain inspection findings to the Quality Managers and, occasionally, the Sales, Purchasing and Logistics.

Required skills & experience:

• Understanding of basic math, including percentages and tolerances
• Familiar with complex ERP systems

Preferred skills & experience:

• ITE or diploma in electronics engineering or equivalent
• Experience handling electronic components and/or inspection/quality assurance
• Familiar with complex ERP systems
• Proficient in Microsoft Office suite
• Basic photography and photo editing

Required Traits

• Strong written and verbal communication skills
• Able to work with limited oversight
• Detail-oriented and thorough
• Organized
• Problem solver
• Quick learner
• Adaptable
• Dedicated
• Able to work in a fast-paced environment

Company traits

• Is amazing
• Demonstrates mutual respect and trust
• Acts courageously
• Owns own outcomes

Work Environment

This position works in Velocity’s Inspection and Distribution Center, a hybrid laboratory/warehouse environment. Most work is performed in an Electrostatic Protected Area (EPA).

• Personnel must wear protective smocks and grounding footwear inside the EPA
• Traffic through the IDC includes electric lift trucks
• Some inspections include: X-ray equipmentHot surfacesSolvents
• Some products contain small amounts of toxic materials (e.g. lead-based solder)

Physical Requirements

• Close vision
• Color discrimination
• Manual dexterity: manipulation of very small items
• Occasionally lift up to 50 pounds

ABOUT SIOUX 

Sioux is a strategic high-tech solutions provider that develops, innovates and assembles complex high-tech systems We have a team of over 1,200 dedicated engineers who either support our clients or serve as their Research and Development department. Our strong productivity allows us to speed up product development, giving our clients a competitive edge at a better cost-effectiveness. As a rapidly growing employer, Sioux values its employees' growth and well-being. We invest in their career development and foster a positive work environment that promotes personal and professional growth.

SIOUX IN SINGAPORE Sioux Singapore plays a pivotal role in the Asian market by offering R&D services from our centers across Europe and Asia to customers, leading development teams in Asia, from Singapore This expansion allows us to meet the changing needs of our domestic and international (OEM) customers in the semiconductor, analytical, and medical industries.

The Role 
Your role will involve developing equipment control software to support customers in the mentioned domains. Your responsibilities include:

• Collaborating with architects to define product architecture in your domain.
• Analyze customer needs in software requirement engineering
• Analyzing, designing, implementing, and test the control software.
• Conducting peer reviews to ensure product quality.
• Leading the small development team and ensuring team performance.
• Working as an integral part of a scrum team and handling user stories across the full stack.
• Developing functionality using Agile practices, emphasizing speed and quality.
• Leadership roles for higher positions

The Job Scope 
Develop testable quality code in C# for following machine control functionalities: WPF and WinForm UI develelopment

• Machine Control and Sequencing
• Hardware abstraction layer
• Subsystem / device communication and control
• System calibration and positional error measurement and compensation
• SECS/GEM functionalities.
• Lead scrum team technically though sprint planning, design review, merge request review, design/code refactoring activities.

Job requirements

QUALIFICATIONS AND EXPERIENCE

• A technical background with a higher professional or university education.
• Ideally, a background in the semiconductor, analytical, or medical domain.
• Experience in developing equipment control applications, including working with PC-based control, embedded controller, or motion controller
• Minimum 5 years of experience in C# in object-oriented programming, and UML tools
• Minimum 5 years in object-oriented analysis and design with common design patterns
• Minimum 5 years in active design refractoring with CleanCode/Solid princicple , and design refractoring with common design patterns
• Minimum 5 years leading Scrum development teams with requirement engineering, Sprints managements and technical design reviews

DESIRABLE SKILLSET

• Able to handle complex software solution
• Experience with C# Object-Oriented Analysis and Design (OOAD) and programming
• Experience with C# WPF, MVVM framework
• Experience with C# NUnit unit test framework
• Worked with Agile Scrum and Kanban team
• Worked with git workflow with online repositories like Gitlab, Github, Bitbucket etc
• Worked with git tools like SourceTree, TortoiseGit, GitKraken, Fork etc
• Worked with Continuous Integration tools

DESIRABLE SOFT SKILL

• A preference for autonomy and responsibility in organizing your work.
• Good communication skills and ability to work effectively within a geographically distributed team.
• For Senior positions, good leadership skills to lead a small team of 3-8 developers.

WHAT WE CAN OFFER

You will work within a pleasant working environment, in which High-Tech, High-Fun & High-Value are central.

• Competitive Compensation: Attractive salary, 13-month salary and performance bonus
• Hybrid Work Arrangement: Flexible working environment with 3 days in the office and 2 days of remote work per week, and flexible working hours.
• Comprehensive Healthcare: Inclusive healthcare coverage and annual health screening.
• Work-life balance with generous Leave: Up to 20 annual leave days and 10 company sick leave days without requiring a medical certificate.
• Education Budget: SGD 5,000 per year for training courses aimed at career development. We are committed to investing in your growth and development.

Job Location

Our office is conveniently located next to the Tai Seng MRT station.

Technical Sales Engineer (Automation System Control)

• Work Location: Joo Seng Road, Singapore
• Working Hours: Mon – Fri 8.30am – 5.30pm
• Monthly Salary: Base up to $4500 + Allowance + Commission +VB
• Employment Type: Full time, Permanent Contract

Company Overview

The company is a well‑established organization with a growing presence in both local and international markets. Recognized for the company’s commitment to innovation, quality, and reliability, the company delivers effective solutions across diverse industries and continue to build trusted partnerships worldwide.

Responsibility

• Drive business growth by expanding key accounts across Oil & Gas, Pharmaceutical, and other industrial sectors in Singapore.
• Provide technical sales consultation and support, promoting electrical solutions and strengthening market presence.
• Manage the full sales cycle, including quotations, order closures, submittals, and issue resolution.
• Consistently achieve or exceed sales and margin targets through effective account management and business development.
• Assess client requirements, gather market intelligence, and shape sales strategies to stay competitive.
• Build and maintain strong, long‑term relationships with stakeholders at all levels within client organizations.

Requirements

• Diploma in Electrical Engineering or equivalent which is recognized by the relevant authority.
• Minimum 1 year of proven sales experience to industry customers
• Strong interpersonal and communication skills
• Access to own/rent a personal vehicle for work-related travel
• Candidate who can start immediately or within short notice will be preferred

We regret to inform you that only shortlisted applicants will be notified.
Recruit Lync Pte Ltd | EA License Number: 22C1000
Chen Hoe Nam | EA Personnel License: R25158678

1. Perform daily periodic checks of Central Kitchen to ensure compliance to in-house GMP/GHP standards, SOP, Product Specifications, etc.

2. Conduct random checks on incoming raw materials, and perform product cutting on raw materials to ensure goods received are within in-house specifications.

3. Ensure Process Verification and Validation exercise are completed (i.e. SOP/CCP verification, new product launch process observation, monthly facility checks, monthly traceability exercise, finished goods shelf-life verification, etc.)

4. Conduct investigations on product/process non-conformance (on-line and customer complaints) and follow-up on proposed corrective/preventive measures to ensure effectiveness.

5. Promptly follow-up with contractors (chemical/pest control) during routine servicing to ensure work orders are conducted as per contract.

6. Participate and engage in quality system implementation (audit activities by regulatory/certification bodies and customers).

7. Conduct data/trend analysis on non-conformity of raw material/finished goods, pest reporting statistics, monthly production and facility check statistics, etc. for process and quality improvement.

8. Ensure analysis of food products via microbiological and physical testing, calibration of lab equipment and measurement tools, internal sensory evaluation are conducted as per schedule.

9. Report all non-conformances, discrepancies and/or deviations, and follow-up on the investigation of the non-conformity results.

10. Other projects as assigned.