Total 90 job vacancies in Singapore

Are you passionate about quality and attention to detail? Join a dynamic manufacturing environment where your expertise will play a vital role in ensuring products meet the highest standards before reaching production.

Key Responsibilities

• Conduct inspections and testing on incoming materials, components, and finished products to verify compliance with specifications, drawings, and quality requirements.
• Record inspection findings accurately and perform system updates and transactions following inspection approvals.
• Evaluate and document First Article Inspection (FAI) samples submitted by suppliers.
• Identify and escalate non-conforming materials through the appropriate quality reporting processes.
• Support quality documentation activities and maintain inspection records.
• Assist with administrative and documentation tasks related to quality operations.

What We're Looking For

• Qualification in Engineering or a related technical discipline.
• Experience in a manufacturing, production, quality assurance, or quality control environment.
• Familiarity with inspecting electronic, electrical, or mechanical components based on technical drawings and specifications.
• Proficiency in using inspection and measurement tools such as vernier calipers, micrometers, microscopes, measuring scopes, or similar equipment.
• Knowledge of regulated manufacturing processes and laboratory practices will be advantageous.
• Meticulous, analytical, and committed to maintaining high quality standards.

Interested applicants, please send your updated resume to leonleong@recruitexpress.com.sg

Leon Leong De Cong
R1551708
Recruit Express Pte Ltd
EA License No. 99C4599

Are you passionate about quality and precision? Join a dynamic manufacturing environment where your attention to detail plays a key role in ensuring products meet the highest standards before reaching production.

What You'll Be Doing

• Conduct inspections and testing of incoming materials, components, and finished products to ensure compliance with specifications and quality requirements.
• Review engineering drawings, specifications, and quality checklists during inspection activities.
• Record inspection findings accurately and update relevant transactions within SAP.
• Perform First Article Inspection (FAI) evaluations and document results accordingly.
• Raise quality notifications for non-conforming materials and products identified during inspections.
• Support quality documentation and administrative activities, including compilation of production and quality records.
• Collaborate with internal teams to uphold quality standards across operations.

What We're Looking For

• Qualification in Engineering, Manufacturing, Technical Studies, or related disciplines.
• Experience in a manufacturing, quality control, inspection, or laboratory environment will be advantageous.
• Familiarity with inspecting electronic, electrical, mechanical, or PCB-related components.
• Comfortable interpreting technical drawings and product specifications.
• Hands-on experience using inspection and measurement equipment such as vernier calipers, micrometers, microscopes, pipettes, smart scopes, or similar tools.
• Knowledge of regulated manufacturing environments and SAP systems is an advantage.
• Meticulous, organized, and committed to maintaining high quality standards.

Please send your application to: leonleong@recruitexpress.com.sg

Leon Leong De Cong
R1551708
Recruit Express Pte Ltd
EA License No. 99C4599

Job Description:

• Work as a team to create and implement comprehensive quality assurance plans that outline the processes and procedures for ensuring quality throughout the product lifecycle, from design to manufacturing to delivery.
• Conduct internal and external audits to assess the effectiveness of quality control procedures and identify areas for improvement.
• When quality issues are identified, work to determine the root cause of the problem, develop corrective actions, and monitor their implementation to ensure they are effective.
• Ensure that company's products and services meet relevant industry standards and regulations, including standards like NADCAP.
• Provide training and awareness programs for employees on quality control procedures and best practices.
• Actively participate in continuous improvement projects to enhance quality and reduce costs.
• Collaborate with suppliers to ensure that their products and services meet the required quality standards.

Requirement:

• Min Degree in Engineering
• Min 3 years of experience in certifying staff and lead QA activities

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 5 years of experience in QMS, AS9100, NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Responsibilities

• Manage customer complaints, corrective and preventive action programs.
• Work closely with customers, production and suppliers to meet the quality requirements.
• Review and prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
• Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Responsible for product quality management, implement quality plans, drive quality improvement projects and prepare quality report to identify problem areas and work on problem resolutions
• Interface with and handle customers/vendors on quality issues.
• Handle the customer quality/customer satisfaction issues for global and major customers, which include monitoring field complaints, coordinating investigation and following up within the business to ensure appropriate closure in a timely fashion.
• Assume the focal role for investigating high failure rate customer issues, coordinating the use of different resources to investigate the customer issues.
• Lead the internal team members in achieving the ISO9001:2015 accredited certification as well as customer-specific qualifications.
• Work closely with internal team members and external suppliers to address product-related quality issues, and drive corrective and preventive actions for continuous improvement.
• Lead the quality effort to identify key process and quality improvement in nonconformances (NCR) and rejects.
• Managing and monitoring to ensure organization compliance with Trade, Environmental Health and Safety requirement.
• Perform other duties as requested by management .

Requirement

• Min Diploma in Electrical Engineering, Mechanical Engineering or relevant
• Min 3 years of experience in Manufacturing/EMS/Semiconductor industry
• Knowledge in 5S, PFMECA, SPC & ISO 9000 series Quality system.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. e regWret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• Work as a team to create and implement comprehensive quality assurance plans that outline the processes and procedures for ensuring quality throughout the product lifecycle, from design to manufacturing to delivery.
• Conduct internal and external audits to assess the effectiveness of quality control procedures and identify areas for improvement.
• When quality issues are identified, work to determine the root cause of the problem, develop corrective actions, and monitor their implementation to ensure they are effective.
• Ensure that company's products and services meet relevant industry standards and regulations, including standards like NADCAP.
• Provide training and awareness programs for employees on quality control procedures and best practices.
• Actively participate in continuous improvement projects to enhance quality and reduce costs.
• Collaborate with suppliers to ensure that their products and services meet the required quality standards.

Requirement:

• Min Degree in Engineering
• Min 3 years of experience in certifying staff and lead QA activities

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 5 years of experience in QMS, AS9100, NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Responsibilities

• Manage customer complaints, corrective and preventive action programs.
• Work closely with customers, production and suppliers to meet the quality requirements.
• Review and prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
• Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Responsible for product quality management, implement quality plans, drive quality improvement projects and prepare quality report to identify problem areas and work on problem resolutions
• Interface with and handle customers/vendors on quality issues.
• Handle the customer quality/customer satisfaction issues for global and major customers, which include monitoring field complaints, coordinating investigation and following up within the business to ensure appropriate closure in a timely fashion.
• Assume the focal role for investigating high failure rate customer issues, coordinating the use of different resources to investigate the customer issues.
• Lead the internal team members in achieving the ISO9001:2015 accredited certification as well as customer-specific qualifications.
• Work closely with internal team members and external suppliers to address product-related quality issues, and drive corrective and preventive actions for continuous improvement.
• Lead the quality effort to identify key process and quality improvement in nonconformances (NCR) and rejects.
• Managing and monitoring to ensure organization compliance with Trade, Environmental Health and Safety requirement.
• Perform other duties as requested by management .

Requirement

• Min Diploma in Electrical Engineering, Mechanical Engineering or relevant
• Min 3 years of experience in Manufacturing/EMS/Semiconductor industry
• Knowledge in 5S, PFMECA, SPC & ISO 9000 series Quality system.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. e regWret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

• People-centered Organisational Culture
• Teamwork
• Innovative and Energetic Workplace with a Growth Mindset

JOB DESCRIPTION

We are looking for a full-time deputy manager who is disciplined and meticulous on critical matters, so that records are relevant, accurate and properly kept. In addition, the candidate should have a systems improvement and a forward looking mindset. By focusing on the bigger picture, the deputy manager builds trust in the organisation across departments so process improvements are welcomed and implemented.

Prior experience in student records management, student admissions, and internal audit will be a strong advantage. Working in EduTrust schools is not necessary but will be a plus.

Responsibilities (Registrar) include:

1. Check and process student admissions and student contracts
2. Maintain accurate student records and database
3. Administer student pass-related matters

Responsibilities (Quality Assurance) include:

1. Oversee the record keeping by department heads related to critical documents
2. Assist the Principal to organise regular departmental reviews related to compliance and continual improvement
3. Assist the Principal to identify systematic issues and streamline work processes across the organisation as part of continual improvement
4. Oversee feedback management and complaints. Administer surveys

Other Supporting Responsibilities (Programme Operations) include:

1. Provide operations support to the running of classes
2. Coordinate student services and career and industry-related events

Requirements

• Possess at least a Degree or equivalent
• At least 5 Years of working experience in the related fields
• Attributes: Disciplined, meticulous, big picture, problem solver, high ethical integrity
• Required skills: Spreadsheets and formulas, data analysis, critical thinking, writing clearly and concisely

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Oversea travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Oil & Gas industry with experience in Supplier Quality
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Oversea travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Oil & Gas industry with experience in Supplier Quality
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 5 years of experience in QMS, AS9100, NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900