Total 7 job vacancies in Singapore

The Software Control Engineer in NPDI MTS Singapore is responsible for the design, development, validation, and support of software control systems for HP measurement and test tools used in New Product Development & Introduction (NPDI). The role focuses on system‑level software that interfaces with electrical, mechanical, and vision subsystems to ensure accurate measurement, reliable operation, and successful product qualification and ramp.

Key Responsibilities

• Design, develop, and maintain software control systems for HP MTS test tools supporting ink supplies, printhead, and related NPDI platforms. These include upgrades for NPI such as new test methodologies and recipes.

• Own system‑level control software for electrical drive systems, motion control, sensing, and measurement.

• Support Level 3 system engineering activities for MTS tools, including troubleshooting, root‑cause analysis, and corrective actions.

• Collaborate with global MTS core technology teams (Level 4) on tool enhancements, characterization, and complex software issues.

• Participate in tool characterization, correlation studies, and calibration activities to ensure measurement accuracy and repeatability.

• Interface closely with Electrical, Mechanical, and Vision engineers to resolve integrated HW/SW system issues.

• Support deployment, rollout, and sustainment of MTS software for SEA region manufacturing and partner sites.

• Prepare and maintain technical documentation, including software descriptions, troubleshooting guides, and engineering notes.

• Provide. engineering‑level support, training, and guidance to process, product, and manufacturing engineering teams as required.

Required Skills & Competencies

• Bachelor, Masters, or PhD in engineering/physics science degree, computer science, computer engineering, or with relevant software experience.

• Good understanding of tester software systems including hardware integration.

• Experience with system‑level debugging involving software, electronics, motors, sensors, and instrumentation.

• Knowledge of measurement systems, calibration concepts, and tool characterization.

• Ability to work effectively in cross‑functional engineering teams.

• Strong analytical, problem‑solving, and troubleshooting skills.

• Clear technical communication and documentation skills.
  Understanding of motion control and electric motor concepts.

• Ability to exercise engineering judgment and work within defined policies and practices as needed.

• Able to determine best methods for accomplishing work and achieving deliverables.

• Exhibit solid planning, organizational, and documentation skills.

• Familiarity with MFC, WinForms, WPF, STL, .NET, Visual Studio IDE, Git hub a plus.

Preferred Technical Exposure

• PC‑based and PLC‑based control systems

• Motion control and motor PID tuning

• Electrical drive and sensing systems

• Software architecture for engineering test platforms

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

We are seeking an experienced Software Quality Engineer to help ensure the reliability, performance, and usability of our software products. You’ll work closely with developers, product managers, and other stakeholders to build high-quality solutions and continuously improve our testing practices.

Working Location: North East

Job Type: Contract (Annual Renewal)

Why You’ll Love Working Here

• Government Projects
• Up to S$10,000 (Basic) + AWS
• Hybrid Work Arrangement

Responsibilities:

• Design, develop, and execute test plans, test cases, and test scripts
• Perform manual and automated testing across web, mobile, and/or backend systems
• Identify, document, and track defects
• Collaborate with engineering and product teams throughout the development lifecycle
• Contribute to improving QA processes, tools, and standards
• Validate bug fixes and verify releases before deployment
• Participate in requirement reviews and provide feedback from a quality perspective

Requirements:

• Min 4. years of experience in software quality assurance or testing
• Solid understanding of software development and QA methodologies
• Experience in automated testing tools/frameworks (e.g. Playwright, Cucumber, Selenium, Appium)
• Knowledge of CI/CD pipelines
• Experience in testing APIs, performance, or security

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data as it is not required at this application stage.

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Elias Yeo (Outsourcing Team)
ScienTec Consulting Pte Ltd - 11C5781

Company Overview   

Amperesand is reinventing how the world powers its most critical systems.

We are facing a once-in-a-generation opportunity for infrastructure disruption. Electricity demand is skyrocketing, driven by AI factories, electric vehicles, and modern industrial growth. Energy supply is shifting to incorporate a more diverse mix of resources – including solar, gas, and batteries – at a massive scale.

And yet the power infrastructure behind our latest mega-projects hasn’t meaningfully changed in nearly 100 years. Supply chains for today’s infrastructure equipment can’t match the pace and sophistication of critical energy projects. Ampersand is building hardware and software that rewrites this broken power infrastructure playbook to support a new era of energy abundance.

We’ve built a new class of intelligent, software-defined power infrastructure products leveraging a decade of advanced medium voltage Solid State Transformer research that’s now ready for commercial deployment.

Our products and solutions go far beyond the capabilities of traditional electrical equipment. We make power systems that are faster to deploy, dramatically smaller and more efficient, and capable of supporting modern, dynamic energy needs for tomorrow’s most demanding energy consumers.

Scalable in-house advanced manufacturing capability is our foundation for meeting timeline and quality expectation to serve infrastructure customers around the world.

Amperesand is led by breakthrough energy hardware development veterans and funded by top tier investors who share our vision of building a category-defining energy technology company.

With hubs in San Francisco, Reno, and Singapore, our global team is laser focused on building foundational technology to solve the most pressing problems in power infrastructure at scale.

Join us in building the power foundation of the future!

Role Summary 
As a Power Electronics Control Intern, you will contribute to the design, modeling, analysis, and validation of advanced power conversion systems, including AC-DC and DC-DC converters used in low-voltage and medium-voltage applications. This internship provides hands-on exposure to real-world power electronics development, with an emphasis on control systems, system-level behavior, and laboratory validation. You will work closely with experienced power electronics, firmware, and system engineers, contributing through analysis, simulation, implementation support, and experimental evaluation of advanced power converters under technical guidance.

Responsibilities: 

• Assist in modeling and analysis of power converters and control loops using control-oriented 
  techniques. 

• Support development and evaluation of control strategies for AC-DC and DC-DC power converters. 

• Help characterize system behavior, including stability, transient response, and operating limits. 

• Participate in laboratory testing, debugging, and validation of power electronics hardware. 

• Support data collection, analysis, and documentation of experimental results. 

• Collaborate with hardware, firmware, and system engineers on power electronics 
  development tasks. 

• Contribute to simulation and modeling activities using industry-standard tools. 

• Follow safe laboratory practices when working with high-voltage and high-power systems. 

Qualifications: 

• Currently pursuing a Bachelor’s, Master’s, or PhD degree in Electrical Engineering or a closely related field. 

• Academic coursework or project experience in power electronics, control systems, or related areas. 

• Basic understanding of power converter operation and control concepts. 

• Familiarity with control fundamentals such as feedback, stability, and transient response. 

• Ability to analyze technical problems and learn new concepts quickly. 

• Willingness to work hands-on in a laboratory environment under supervision. 

Bonus Qualifications:  

• Coursework or project experience involving power electronics converters or control systems. 

• Exposure to modeling and simulation tools such as MATLAB/Simulink, PLECS, or PSIM. 

• Basic programming experience in C/C++, Python, or MATLAB. 

• Familiarity with laboratory instrumentation such as oscilloscopes and power supplies. 

• Interest in advanced power conversion systems (e.g., medium-voltage, multilevel, or SST architectures). 
   

What You Will Learn: 

• Practical control-oriented modeling and analysis of power converters 

• Hands-on experience validating control concepts on real hardware. 

• Exposure to AC-DC and DC-DC converter architectures across LV and MV systems. 

• How control, hardware, and firmware interact in real-world power electronics systems. 

• Industry best practices for testing, debugging, and documentation

Please note: This role requires working on-site 5 days a week. We do not offer hybrid or remote options. 

How to apply: Please apply through this page on our career site: https://job-boards.greenhouse.io/amperesand/jobs/4164330009

Company Overview   

Amperesand is reinventing how the world powers its most critical systems.

We are facing a once-in-a-generation opportunity for infrastructure disruption. Electricity demand is skyrocketing, driven by AI factories, electric vehicles, and modern industrial growth. Energy supply is shifting to incorporate a more diverse mix of resources – including solar, gas, and batteries – at a massive scale.

And yet the power infrastructure behind our latest mega-projects hasn’t meaningfully changed in nearly 100 years. Supply chains for today’s infrastructure equipment can’t match the pace and sophistication of critical energy projects. Ampersand is building hardware and software that rewrites this broken power infrastructure playbook to support a new era of energy abundance.

We’ve built a new class of intelligent, software-defined power infrastructure products leveraging a decade of advanced medium voltage Solid State Transformer research that’s now ready for commercial deployment.

Our products and solutions go far beyond the capabilities of traditional electrical equipment. We make power systems that are faster to deploy, dramatically smaller and more efficient, and capable of supporting modern, dynamic energy needs for tomorrow’s most demanding energy consumers.

Scalable in-house advanced manufacturing capability is our foundation for meeting timeline and quality expectation to serve infrastructure customers around the world.

Amperesand is led by breakthrough energy hardware development veterans and funded by top tier investors who share our vision of building a category-defining energy technology company.

With hubs in San Francisco, Reno, and Singapore, our global team is laser focused on building foundational technology to solve the most pressing problems in power infrastructure at scale.

Join us in building the power foundation of the future!

Role Summary

As our Senior Power Electronics Control Engineer you will focus on control and system behavior of advanced power converters, including AC-DC and DC-DC topologies, used across low-voltage and medium-voltage power conversion systems. The role emphasizes multilevel power converter architectures and resonant power conversions used in solid-state transformers (SST). You will work hands-on across control design, modeling, analysis, laboratory debugging, and validation, and collaborate closely with hardware, firmware, and system engineers to bring robust power electronics solutions from concept through validation.

Responsibilities:

• Design and implement digital control algorithms for advanced AC-DC and DC-DC power converters across low- and medium-voltage applications.

• Develop small-signal and large-signal models to support stability analysis, loop compensation, and transient optimization.

• Support development of control strategies for advanced power conversion stages, including multilevel or resonant topologies and AC-DC / DC-DC stage interactions.

• Implement real-time control algorithms on DSP/MCU/SoC platforms.

• Lead hands-on debugging and root-cause analysis across simulation, firmware integration, hardware bring-up, and lab testing.

• Collaborate with hardware and firmware teams to optimize sensing, protection, and control-loop performance.

• Support validation activities including loop stability measurement, transient response testing, and fault handling verification.

• Own complex control subsystems and contribute to system-level design under technical leadership.

Qualifications:

• Technical degree or equivalent industry experience in Electrical Engineering or a closely related field, with a strong focus on power electronics and control systems.

• 3+ years of experience designing and deploying digital control for power converters, with demonstrated ability to own and execute complex technical tasks.

• Strong understanding of resonant power conversion principles and their control implications across isolated and non-isolated power converter architectures.

• Solid foundation in control theory, including loop compensation, stability margins, frequency-domain and time-domain analysis, and nonlinear system behavior.

• Proven experience implementing real-time control algorithms on embedded platforms.

• Hands-on laboratory experience debugging power converters.

• Ability to translate theoretical control concepts into practical, robust implementations.

• Strong problem-solving and analytical skills, with the ability to work through technically ambiguous challenges.

• Familiarity with modeling and simulation tools such as MATLAB/Simulink and PLECS.

• Proficiency in embedded C for real-time control implementation and debugging.

Bonus Qualifications:

• Exposure to medium-voltage power electronics systems.

• Exposure to bidirectional power conversion and power flow control.

• Experience supporting products from R&D through validation and deployment.

Please note: This role requires working on-site 5 days a week. We do not offer hybrid or remote options.

How to apply: Please submit your application through our careers page: https://job-boards.greenhouse.io/amperesand/jobs/4164340009