Total 12,918 job vacancies in Singapore

• Well-Established Company

• Basic $4000 to $5000 + AWS +Variable Bonus

• Excellent Welfare and Benefits + Career progression

• Working location: WEST

• Normal Working Hours (Mon to Fri)

• BMS | ACMV
  

About the role

This role involves preparing proposals, quotations, and cost estimations for BMS and ACMV projects. You will review tender specifications, drawings, and project requirements, perform quantity take-off and costing for Building Management System (BMS) and ACMV systems, and assist in the preparation of Bill of Quantities (BOQ), technical submissions, and tender documentation.

Key responsibilities

• Prepare proposals, quotations, and cost estimations for BMS and ACMV projects

• Review tender specifications, drawings, and project requirements

• Perform quantity take-off and costing for Building Management System (BMS) and ACMV systems

• Assist in the preparation of Bill of Quantities (BOQ), technical submissions, and tender documentation

• Support the Proposal / Sales Manager on technical, commercial, and costing matters

• Coordinate with internal departments, suppliers, and subcontractors during tender preparation

• Evaluate supplier and subcontractor quotations and conduct cost comparisons

• Ensure tender submissions are completed accurately and within the required timeline

• Prepare project-related documentation, reports, and cost analysis

• Participate in technical clarifications and tender discussions when required
  

About you

• Diploma and/or Degree in Mechanical Engineering, Electrical Engineering, Building Services, or related discipline

• Experience in ACMV, BMS, Building Automation, M&E, tendering, estimation, or proposal preparation will be advantageous

• Candidates with project engineering experience and interest in tendering or proposal work are welcome to apply

• Training will be provided for candidates with lesser experience
  

• Oversee contract execution and monitor installation progress, ensuring timely delivery through coordination with clients, consultants, and subcontractors.
• Prepare and review method statements, shop drawings, technical submissions, and work progress reports for M&E-related tasks.
• Liaise with stakeholders to resolve technical and site issues, and coordinate with authorities for inspections, testing, and commissioning.
• Assist in procurement of materials, equipment, and labour within budget while supporting project negotiations.
• Apply expertise in Data Centers, DfMA, and specialized systems such as VAV/VRV, chillers, chilled water pipes, and lighting control systems.

Requirements:

• Diploma in Mechanical/Electrical Engineering or equivalent.
• At least 2 years of experience handling and monitoring the progress of projects in Construction industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

I’m partnering with a growing manufacturing company that is actively expanding across Southeast Asia.

This is an opportunity for a motivated Assistant Engineer / Engineer to join their  growing team. You will play a key role in translating structural designs into buildable outcomes — managing steel reinforcement take-offs, technical drawings, and coordinating with site teams to ensure smooth project delivery.

What You’ll Be Working On

• Extract bill of quantities (BQ) for steel reinforcements from structural drawings
• Prepare and manage schedules for technical drawing submissions and production
• Draft construction and shop drawings using AutoCAD
• Coordinate with site personnel on all technical matters
• Attend site meetings and discussions when required
• Liaise with consultants, main contractors, and subcontractors on technical queries⸻

What My Client Is Looking For

• Degree or Diploma in Civil / Structural Engineering, or equivalent qualification
• Proficient in AutoCAD; knowledge of other drafting software is advantageous
• Able to read and interpret structural drawings and specifications
• Responsible, self-motivated with good interpersonal and communication skills
• Fresh graduates are welcome to apply; relevant internship experience is an advantage
• Candidates with prior experience in rebar detailing or structural consultancy preferred

If you would like to explore this opportunity, please email your resume in Microsoft Word format to eugene.chang@thevinesearch.com

We thank you for your interest and will contact shortlisted candidates for a more detailed discussion.

EA License No. 25C2923
EA Registration No. R1105304

We are seeking a diligent QC / Food Safety Officer to join our team. You will play a key role in ensuring the quality and safety of our products by performing inspections, maintaining proper storage standards, and supporting food safety initiatives.

Key Responsibilities:

• Inspect and receive incoming products to ensure compliance with quality standards.
• Check and approve products before delivery.
• Maintain daily CCP records (cleanliness/hygiene on the premises, cold rooms temperatures etc.).
• Monitor warehouse storage using FIFO principles and ensure proper storage conditions.
• Print production labels accurately.
• Conduct routine pest control checks and report any issues to vendors.
• Investigate food safety-related cases raised by customers.
• Suggest improvements to current systems and methods to enhance food safety standards.
• Collaborate with QA teams for documentation related to food safety systems.
• Perform any other relevant duties as assigned.

Working Days & Hours:

• Monday – Friday: 8:00am – 5:00pm
• Saturday: 8:00am – 12:00 noon

Job Requirements:

• Relevant qualification in Food Technology, Food Science, or related field preferred.
• Experience in quality control, quality assurance, or food safety operations is a plus.
• Knowledge of food safety standards and warehouse best practices.
• Strong attention to detail and organizational skills.
• Ability to work independently and as part of a team.

Location: Tuas, Singapore

Contract Period: July – December 2026

Salary: Up to SGD 9,500 / month (Base) + SGD 250 Monthly Transport Allowance

About the Role

We are looking for an experienced QC Validation Specialist to join a leading-edge pharmaceutical manufacturing facility in Tuas for a critical 6-month project. This role focuses on managing the lifecycle of QC Laboratory equipment—spanning qualification, requalification, relocation, decommissioning, and ultimate retirement—ensuring absolute compliance with strict global GMP regulations.

Key Responsibilities

• Equipment Lifecycle Management: Execute end-to-end qualification (IQ/OQ/PQ), requalification, relocation, and decommissioning/retirement protocols for a wide range of QC laboratory analytical and micro equipment.

• Hands-on Validation: Lead validation activities for systems including, but not limited to: HPLC, CE, UV-Vis Spectrometers, TOC Analyzers, Microplate Readers, Liquid Particle Counters, Analytical Balances, Incubators, and Particle Counters.

• Documentation & Compliance: Author, review, and execute validation master plans, protocols, deviations, and final summary reports in strict accordance with Good Manufacturing Practices (GMP).

• Cross-functional Coordination: Collaborate closely with QC Lab Analysts, Quality Assurance, and external vendors to minimize lab downtime during relocation and equipment retirement.

• Data Integrity & Archiving: Ensure instrument software, audit trails, and historical data are securely backed up and compliant with data integrity standards prior to equipment decommissioning.

Skills and experience required

• Education: Minimum of a Diploma or Bachelor’s Degree in any Engineering field, Science, or a related technical discipline.

• Experience: Minimum of 5 years of hands-on experience in the qualification, requalification, relocation, or decommissioning of GMP laboratory equipment within the pharmaceutical or biopharmaceutical industry.

• Technical Expertise: Demonstrated, deep familiarity with analytical and laboratory instrumentation (e.g., Chromatography systems, spectrometers, counters, and controlled temperature units).

• Regulatory Compliance: Robust understanding of GMP regulations, data integrity principles, and data lifecycle management.

Please click on the 'apply' button to apply online. For more information, please reach out to Wai Ling Tai. (EA: 94C3609 /  R1110392  )

Job Description

• Industry/ Organization Type: Engineering
• Position Title: QC Technician
• Working Location: Tampines
• Working Hours: 5.5 days (Mon to Fri 9AM – 7PM, Sat 9AM – 1PM)
• Salary Package: Basic Salary up to $2,200 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Perform in-process, final, and incoming inspections of precision parts using measurement tools such as calipers, micrometers, height gauges, and CMM machines.
• Carry out dimensional and visual inspections to ensure products conform to engineering drawings and customer specifications.
• Record inspection results accurately on quality forms and maintain proper documentation for traceability and audits.
• Detect and report non-conformities or defects, and assist in root cause analysis and corrective actions.
• Ensure adherence to quality procedures, work instructions, and safety standards throughout the production process.
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Minimum 1 year working experience in related field
• Candidates with Mechanical Engineering background are preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #77167 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

As a Report Engineer (Assistant Civil Engineer), you will play a crucial role in providing vital support to the engineering team by preparing progress reports, work done reports, and various engineering documents. Your attention to detail and strong analytical skills will ensure that project updates and information are accurately recorded and communicated. You will also contribute to the company's internal quality management processes and maintain monthly reports, helping to ensure the smooth execution of projects.

Responsibilities:

• Review, interpret and analyse test results and related instrumentation data.
• Prepare reports in accordance with project specifications, applicable codes, and authority requirements.
• Check and verify test records, instrumentation readings, calibration certificates, and testing
• Coordinate with site teams and contractors to clarify testing methodologies, results, and any discrepancies.
• Maintain proper documentation control and records for submission.
• Ensure reports are prepared accurately, clearly, and submitted within agreed timelines.
• Undertake any ad-hoc duties as assigned

Requirements:

• Minimum of a Bachelor's degree in Civil Engineering or a related field. Candidate that does not fulfill this minimum requirement but with relevant experience would be considered
• Meticulous and detail-oriented
• Strong analytical capabilities to interpret project data
• Excellent organizational skills
• Effective communication skills
• MS Office suite, AutoCAD, or project management software
• Office based position, training will be provided by Senior Report Engineer

You may send your resume/ CV to email address directly: hr@geonamics.com.sg

ey Responsibilities

• Provide assistance to QA Manager and Engineer in daily inspection duties
• Supervise inspectors and coordinate the inspection and testing activities
• Keep inspection records and carry out the instrument and tester general maintenance
• Report any nonconformity
• Check inspectors' output and testing results
• Any ad hoc tasks assigned by QA Manager

Requirements

• O Level Above
• At least one year of relevant experience in quality control
• Good analytical skills with strong attention to detail
• Able to work independently and as part of a team
• Familiarity with QC tools and testing equipment is an advantage

Benefits:

• 5-day work week

• Uniform and lunch provided

• Attendance allowance

• Transport allowance

Establishing and implementation of project quality plan, inspection and testing plan and work procedure for Piping, Pressure Vessel and Steel Structural works

Formulate and implement QC checklist, inspection record formats and documentation

Oversee and ensure the site work executed is in accordance with the quality control procedure and contractual requirements to achieve good quality for all projects

Quality performance data collection and documentation for trends and root cause analysis for process improvement

Identity, record and highlight to Project Manager of any identified non-conformances or potential quality issues or risks

QM pre-assessment and pre-handing over inspection

Establishing the contract requirements for both materials and works

Good business acumen and able to evaluate business needs

Manage Project in setting up and document control

Reviewing and updating the project quality plan

Work closely with project team and representatives on systematic selection and evaluation of materials, subcontractors and suppliers

Participate and coordinate site internal and external QA/QC audits to ensure operations are compiled to ISO standard

Minimum ASNT or PCN level III in RT / MT/ PT UT

Minimum 5 years’ experience working in QAQC Engineering position, preferably within an Oil and Gas field. Candidate will be considered for Manager post with at least 8 years’ experience.

Preferably managers specializing in quality Assurance/Control, Engineering – in Oil and Gas industry

Familiar with ISO standard for ISO/IEC 17025

Knowledge of relevant national and international codes and standards (SS, BSEN, ASME, AWS,

ASTM, API, etc.) and familiar with Authorities’ standard details

Detail oriented and excellent organizational skills

Good communication, presentation and inter personal skills

Job Description

• Industry/ Organization Type: Precision Manufacturing
• Position Title: QC Technician
• Working Location: Loyang
• Working Hours: 5 days (Mon - Fri, 8.00am - 5.45pm)
• Salary Package: Basic salary up to $2,000 + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Prepare and submit first article samples for approval.
• Create packaging specifications.
• Develop inspection plans for products.
• Support inspection processes for in-process, incoming, and outgoing parts.
• Train inspectors and operators on quality check points and measurement methods.
• Work with Production, Toolroom, and Suppliers to address quality issues.
• Ensure documents and records comply with ISO quality standards.
• Assist Engineers as needed.
• Manage and maintain all measuring and testing equipment.
• Help Engineers update monthly quality control reports, such as supplier performance.
• Assist Engineers or Managers in collecting and compiling data for reports.
• Support other quality-related tasks as required.

APPLY NOW!!!

• Minimum 2 years of relevant experience.
• Able to read engineering drawings.
• Good reporting and administrative skills.
• Able to work independently with minimal supervision.
• Experience with OGP Smartscope, CMM, or other measuring tools.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #75340 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Descriptions

• As an Equipment Owner able to evaluates, selects, and make justification for equipment that is most appropriate and cost effective for the manufacture of company products.
• Oversees the installation, modification, upgrade, and maintenance of manufacturing equipment.
• Liaise with vendors to resolve equipment issues and manage/drive vendors' performance to meet/exceed equipment KPI, MTTR, MTBF and goals.
• Establishes projects and solutions for increasing uptime, throughput, cost saving and resolve equipment problems that affect the manufacturing process.
• Ability to review Process SPC data, setup equipment FDC and machine control and Improve alarm reduction
• Provides technical support to the manufacturing equipment repair and process engineering organizations.
• Defines and writes preventative maintenance procedures and schedules.
• Conduct training to shift members (PM operator, Technician & Engineers).
• Able to coach shift engineer in performing hardware trouble shooting, generate troubleshoot lesson learnt material and equipment OCAP for sharing with Team

Job Requirements

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• 2 or more years of semiconductor equipment or process engineering experience in Wafer bonder and Sam coat machines.
• Consistent track record to solve problems & address root causes for tools
• Perform Normal/ Swing Shift ( or 12-hour rotating shift if required)
• Good interpersonal skills and is an excellent team player
• Good verbal and written communication skills
• Logical thinking capability and good analytical skill

Job Description

• Lead and manage Quality Assurance and Food Safety operations across multiple food manufacturing facilities.
• Maintain and continuously improve the Food Safety Management System (FSMS), ensuring compliance with ISO 22000, Halal, SFA, customer, and regulatory requirements.
• Lead internal and external audits, certifications, and regulatory inspections, ensuring audit readiness and timely closure of findings.
• Conduct site inspections of production to ensure compliance with food safety, quality and hygiene standards.
• Drive investigations and corrective actions for customer complaints, non-conformances, and food safety incidents.
• Oversee supplier qualification, raw material approval, and quality compliance programmes.
• Ensure effective implementation of GMP, HACCP, hygiene, sanitation, and quality control programmes across operations.
• Collaborate closely with the Production team and provide operational support when required to ensure efficient and compliant manufacturing operations
• Support new product development and regulatory compliance initiatives, including HPB, HCS, and Nutri-Grade requirements.
• Serve as the key point of contact for food safety, quality, regulatory, and compliance matters, reporting directly to the Director and General Manager.
• Any other duties assigned by the Management

Job Requirement

·        Possess at least a Diploma in Food Technology,Food Science, Food Nutrition or equivalent.

·        Minimum 5 years working experience in related field.

·        Relevant knowledge in FSSC, ISO 9001, ISO 22000,GMP, HACCP.

·        Knowledge of tools, concepts and methodologiesof QA.

·        Proficient in Microsoft Word, Excel andPowerPoint.

·        Able to work independently, as well as a teamplayer.

·        Working day pattern: 5 days, 8 hrs per week.

·        Location: Senoko or Woodlands area

Note: We offer lunch meal.

If interested, please send your resume to WhatsApp @ +65 9112 1178

Job Summary:

Leading a team in responsible for the strategic design, implementation, and continuous improvement of all quality and process control systems within Fab Operations. This role is critical for ensuring world-class product yield, reducing defectivity, and maintaining strict compliance with customer specifications, internal quality standards, and relevant industry certifications.

Responsibilities:

• Develop and drive a strategic roadmap for yield improvement and defect reduction across critical process modules.
• Lead the design and maintenance of advanced, real-time Statistical Process Control (SPC), Fault Detection and Classification (FDC), and Advanced Process Control (APC) systems to stabilize and optimize all fabrication steps.
• Cross-contamination management to achieve balance between research and development flexibilities in integration runsheet flow path vs process tools health and process repeatability.
• Small volume prototype protocol and product and process control plan alignment and set-up with requestor, process margin runs till demonstration of product SPC repeatability and line defect and electrical yield.
• Serve as the technical expert and primary quality interface for key customers, leading customer audits, addressing quality-related concerns, and driving customer-specific quality improvement plans.
• Problem Solving: Direct and oversee high-level, cross-functional root-cause analysis (RCA) and corrective and preventive action (CAPA) teams for major process excursions, non-conformances, and field returns, utilizing methodologies like 8D or Six Sigma
• Metrology & Inspection: Oversee the selection, qualification, and maintenance of all in-line and off-line metrology and defect inspection tools, ensuring measurement system accuracy (Gage R&R) and high data quality.
• Process Window Definition: Collaborate with Process Integration and R&D teams to define, qualify, and stabilize robust manufacturing process windows for all new product introductions (NPI), ensuring Design for Manufacturability (DFM) principles are met.
• Data Analytics: Leverage large-scale manufacturing data (Big Data) to identify subtle process drifts, predict failures, and proactively implement controls.
• Lead, mentor, and manage a team of Quality Engineers, Process Control Engineers, and Technicians, setting performance goals, developing career paths, and fostering a culture of ownership and data-driven decision-making.
• Collaborate closely with all stakeholders to balance the trade-off between quality stability, process efficiency, and tool uptime.

Requirements:

• Degree in Engineering, Materials Science, Chemical Engineering, or a related technical field.
• Preferable 10+ years of experience in the semiconductor industry, with a minimum of 5 years in a leadership/management role focusing on Process Control, Quality Assurance, or Yield Engineering within a Fab environment.
• Deep technical knowledge of semiconductor fabrication processes in different modules.
• Expert-level knowledge of Statistical Process Control (SPC), Design of Experiments (DOE), Failure Mode and Effects Analysis (FMEA), and Lean/Six Sigma methodologies (Black Belt certification highly preferred).
• Strong leadership, presentation, and interpersonal skills, with the proven ability to influence and align technical and executive stakeholders.

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

Join a team responsible for building and enhancing mission-critical digital platforms that support high-impact public services. If you're passionate about software engineering, legacy modernisation, and driving digital transformation, this could be the opportunity for you.

What You'll Do

• Develop, maintain, and enhance enterprise applications across legacy and modern platforms.
• Design and implement new features while ensuring system reliability, scalability, and maintainability.
• Support modernisation initiatives including refactoring, API development, platform upgrades, and architectural improvements.
• Investigate production issues, perform root cause analysis, and contribute to system stability and resilience.
• Collaborate with cross-functional teams to deliver secure, high-quality software solutions.
• Leverage AI-assisted development tools responsibly to improve productivity while maintaining engineering quality and governance.
• Contribute to DevSecOps practices, testing, code reviews, and continuous improvement initiatives.

What We're Looking For

• Degree in Computer Science, Software Engineering, Information Systems, or a related discipline.
• 3–5 years of experience in software engineering, enterprise application development, or application support.
• Strong experience with Java, JavaScript, SQL/PLSQL, JSP, Shell Scripting, or similar technologies.
• Experience working with complex or legacy enterprise systems.
• Familiarity with APIs, databases, system integrations, CI/CD, and software delivery best practices.
• Strong analytical and problem-solving skills with a structured approach to troubleshooting.
• Excellent communication skills and the ability to work with both technical and business stakeholders.

Nice to Have

• Experience in legacy modernisation or technology migration projects.
• Exposure to Spring Boot, Angular, Oracle, Tomcat, WebLogic, IIS, AWS, or similar enterprise technologies.
• Knowledge of DevSecOps, observability, application security, or performance monitoring.
• Experience in regulated or high-availability environments.
• Practical experience using AI tools to accelerate software development responsibly.

Introduction to GlobalFoundries
GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF
Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

What You Will Do

• Maintain and support wafer test equipment or metrology tool readiness in the fab
• Perform preventive maintenance (PM) and troubleshooting of wafer test equipment
• Troubleshoot and upgrade of equipment ensuring minimize downtime
• Analyze and monitor technical charts
• Drive equipment improvement plans and projects
• Ensure and follow good safety practices and custody of tools, equipments and other properties
• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements
• Work and collaborate other projects and/or assignments as needed
• Tool types: KLA, AMAT, ONTO, or Unity

What You Will Need

• Bachelor’s Degree in engineering or equivalent
• 5 years of relevant experience in equipment engineering, preferably in a wafer fab / Electronics / Electrical industry
• Proven ability to identify, assess and solve problems
• Perform Normal / Swing Shift (or 12-hour rotating shift if required)

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

Round-the-clock monitoring and maintenance of the System (hardware and software) to ensure system uptime in accordance to SLA commitments

Respond to all incident / service calls and be first responder onsite to troubleshoot and resolve incidents including basic repairs or parts replacements

Create / update and track ticket in ticketing tool to closure observing SLA commitments

Escalate, when necessary, in accordance to escalation matrix

Perform regular preventive and corrective maintenance, troubleshooting system hardware and all computer-based systems.

Coordinate and work with third-party suppliers or other contractors to identify the causes of issues e.g. hardware, software, network problems and etc. that may affect the proper functioning of the System.

Liaise and work closely with customers to address service concerns and to solve technical problems.

Work with technical team to resolve more advanced issues when necessary

Perform Install / Move / Add / Change (IMAC) activities as tasked

Ensure all material is properly documented and handed over during shift changes

Perform any ad-hoc duties as assigned

Build sustainable relationships and engage customers by taking the extra mile

Job Requirements

Higher NITEC in Electrical, Electronics, IT or equivalent

Relevant experience in IT system support and hardware maintenance

Experience in electrical/mechanical drawing, service/repair manuals and or diagrams will be added advantage

Basic knowledge in Networking and Database management will be added advantage

Strong communication and interpersonal skills. Self-starter, self-motivated and critical thinker who embraces challenges

Ability to work responsibly, independently and in a team

Able to interact with all levels of people and work under stress

Training will be provided
Working hours

Rotating 12 hours shift or as assigned.

Shift pattern: 3 Days work shift followed by 2 days’ rest, 2 Days work shift followed by 3 days’ rest

2 Months Day shift, followed by 2 months night shift

Ability to travel to other sites during shift may be required.

Responsible for civil and steel structures scopes for building construction works.

- Study tender / construction drawings, specifications, contracts scope of works to understand project requirements.

- Plan, schedule work sequences, prepare Microsoft Project for all task and micro-schedule form throughout the project.

- Perform site inspection and ensure that the work is carried out based on the project specification and construction drawing, consultant, and authority requirement.

- Liaise and coordinate with consultants, client, main contractor, other contractor and authority.

- Provide guidance to supervisors in relation to construction works, ensure progress according to schedule.

- Ensure project is executed according to micro-schedule and timeline.

- Resolve all engineering, technical and project queries from time to time.

- Prepare a report and method statement whenever necessary.

- Prepare progress report, handover report, meeting minutes, TOP/CSC documentation, and other requirement request by client and authority.

- Any other ad-hoc duties assigned related to project

Requirements:

- Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Civil / Structural or equivalent.

- Candidate must possesses Civil, Architectural, Steel Structures and/or related experience.

- At least 5 Year(s) of working experience in the related field is required for this position.

- Required Skill(s): Autocad, Microsoft Office, Microsoft Project.

- Able to work on Saturday.

We are seeking an experienced Design Engineer to support detailed engineering, design development, and project execution activities. The successful candidate will be responsible for preparing engineering drawings, performing design calculations, supporting procurement activities, and ensuring engineering deliverables are completed in accordance with project specifications, industry standards, and schedule requirements.

Key Responsibilities

Engineering & Design

• Execute detailed engineering and design activities to meet project requirements, contractual obligations, and applicable industry standards.
• Prepare and review: P&ID drawings Fabrication drawings Equipment layout drawings Pipe routing drawings Equipment and material datasheets
• Perform: Equipment sizing calculations Pipe sizing calculations Hydraulic calculations Pipe stress analysis Material take-offs (MTO)
• Raise purchase requisitions for equipment and materials.
• Review, verify, and sign off engineering design deliverables.

Project & Technical Support

• Liaise with in-house and overseas design teams to ensure engineering deliverables are completed on schedule.
• Support Project Management and Construction Teams during project execution activities.
• Provide engineering support during testing, commissioning, and start-up activities as required.
• Participate in technical reviews, design discussions, and problem-solving activities.

Procurement & Cost Optimisation

• Evaluate vendor quotations and provide technical recommendations during vendor selection.
• Identify and implement value engineering opportunities to improve efficiency and reduce project costs.
• Support tendering and business development activities by providing engineering input where required.

Qualifications & Requirements

• Bachelor's Degree or Master's Degree in Engineering.
• Minimum 5 years of experience in engineering design and detailed engineering activities within industrial, manufacturing, process, utilities, oil & gas, chemical, energy, or infrastructure projects.
• Strong understanding of engineering drawings, piping systems, equipment layouts, and engineering calculations.
• Experience in equipment sizing, hydraulic calculations, material take-offs, and engineering documentation.
• Highly motivated, proactive, and able to work effectively under pressure and tight project schedules.
• Strong communication and coordination skills with multidisciplinary teams.

Preferred Experience

• Experience supporting construction, testing, commissioning, start-up, or operational activities.
• Proficiency in AutoCAD.
• Familiarity with SAP, Navisworks, Microsoft SharePoint, and Microsoft Teams.
• Advanced proficiency in Microsoft Excel, Word, and PowerPoint.

The Defectivity Line Control Engineer is responsible for controlling defectivity in semiconductor wafer fabrication through daily line monitoring, OOC management, tool excursion response, and cross-functional problem solving. The role supports both routine operations and improvement activities to ensure stable process performance, product quality, and effective industrialization.

Key Responsibilities

• Analyze defect Pareto, defect maps, and characterization data to identify root causes and containment actions.
• Drive tool OOC reduction and lead sporadic defect reduction activities.
• Lead the troubleshooting of defectivity alert and involve in Material Review Board for material assessment and disposition.
• Support troubleshooting of defectivity alerts and escalation of critical issues.
• Work closely with process, equipment, device, quality, and production teams to drive defect reduction and line stability.
• Support technology transfer and industrialization activities to ensure smooth deployment of new products and processes.
• Responsible for setting up, optimizing, maintaining Process Defectivity Systems like Automation system (Auto defect sampling, Auto DOI, DOLI), Defect library.
• Opportunity to involve in deployment of Advanced Defectivity Monitoring system involving AI, Convolution Neural Network (CNN) and deep learning with DIT team and opportunities to learn and apply data analytics.

Skills and Competencies

• Degree in Material Science/Electrical/Electronics/Microelectronics/Mechanical/Physics/Chemistry. 
• Preferred minimum 3 years working experience in semiconductor wafer fabrication industry and good knowledge in Defectivity methodology and knowledge of Defectivity inspection tool. Fresh graduate is welcomed to apply as well.
• Knowledge in Klarity Defects/AceXP/Space/Spotfire and other Defectivity related tool will be an added advantage.
• Strong analytical and problem-solving skills.
• Good understanding of semiconductor wafer fab processes.
• Ability to work across departments and communicate clearly.
• Proactive mindset with strong ownership and teamwork.
• Self-driven and independent with an inquisitive mind.
• Familiar with SPC concept and other problem-solving tools: SPACE, FMEA, 8D, Data mining analysis and AI base on Convolution Neural Network (CNN) will be advantageous.

Responsibilities

• Support commissioning, testing, and validation activities for building automation systems, integrated security systems, fire protection systems, monitoring systems, and M&E infrastructure at client project sites.
• Review engineering drawings, system architecture diagrams, schematics, technical specifications, and design documents to ensure compliance with project requirements.
• Conduct system walkdowns, inspections, mechanical completion verification, and operational readiness assessments.
• Develop and execute commissioning plans, testing procedures, validation protocols, and system verification activities.
• Perform functional testing, integrated system testing, Site Acceptance Testing (SAT), and operational verification of automation and monitoring systems.
• Coordinate with client engineering teams across electrical, mechanical, instrumentation, controls, and software disciplines during project execution.
• Manage punch lists, non-conformances, deviations, corrective actions, and system close-out activities.
• Review vendor documentation, commissioning reports, technical manuals, and equipment/system qualification records.
• Support implementation and testing of remote monitoring systems, command centre platforms, alarm management systems, and AI-enabled monitoring solutions.
• Ensure compliance with applicable industry standards, client specifications, safety requirements, and quality management procedures.
• Prepare commissioning reports, validation summaries, test documentation, and project handover deliverables.
• Participate in client meetings and provide technical support throughout project execution and commissioning phases.
• Support troubleshooting, root cause analysis, and performance optimisation of installed systems.
• Contribute to continuous improvement initiatives in commissioning and validation processes.

Requirements

• Bachelor's degree in engineering, Automation, Instrumentation, Electrical Engineering, Mechanical Engineering, or related discipline.
• 8 – 12 years of experience in commissioning, validation, automation, instrumentation, utilities, or engineering project execution.
• Strong knowledge of automation systems, control systems, instrumentation, utilities, and integrated facility systems.
• Experience reviewing engineering documentation, commissioning procedures, and technical specifications.
• Familiarity with systems such as SCADA, BMS, DeltaV, Siemens PCS7, or equivalent platforms.
• Hands-on experience in commissioning electrical, mechanical, HVAC, utility, or integrated building systems.
• Exposure to large-scale infrastructure, commercial buildings, industrial facilities, or mission-critical environments preferred.
• Strong understanding of quality systems, validation methodologies, and risk-based approaches.
• Experience in system integration, performance testing, and operational readiness execution.
• Strong analytical, troubleshooting, documentation, and coordination skills.
• Ability to work independently and manage multiple project assignments.
• Strong communication and stakeholder management skills.

EA License No: 19C9611
EA Personnel Reg No: R22108807 Liang Syeh Wei (Shevy)