Total 12,891 job vacancies in Singapore

Project Engineer (Electrical & Electronics)

Working Days: Mon- Fri 9am-6pm, Saturday 9am-1pm

Location: 38 Defu Lane 10, Singapore 539215 ( Nearest Kovan MRT)

Salary: $2800 to 3500

Job Scope:

• Read and draw circuit diagrams
• Wiring, soldering, and basic assembly work
• Work with sensors, motors, and solenoid valves
• Support PLC and basic PC programming (e.g. C#)
• Assist in testing, troubleshooting, and project implementation
• Willing to work in a cleanroom environment

Requirements:

• Diploma/Degree in Electrical & Electronics or related field
• Basic knowledge of electronics and automation systems
• Training Provided

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

Job Responsibilities:

• Implement QA plan, review, and revision for company level.

• Report on quality related matters to the QA/QC Manager and/orimmediate superior, including preparation of monthly summary Tocreate, prepare and implement the QA/QC plan and any associatedand relevant directives and instructions needed to support Todevelop and manage the quality control and quality assuranceprocedures and ensure compliance.

• To prepare Inspection and Test Plan (ITP) and Inspection ReportsMaintain the ISO and related certifications for company level.

• To perform needed tests on site to ensure works are doneaccording to the contract specifications. Preparation of documentsubmissions for client approval.

• Attend meetings and liaise with the client to ensure that qualityrequirements are being followed at all times.

• Maintain document record master list pertaining to equipmentand monitor on the calibration status. Coordinate and makearrangements for equipment calibration when due.

• Compile and receive relevant material certificates and otherrequired certificates and test report from vendors/suppliers.Coordinate with relevant testing laboratories for testing andwitnessing.

• Compile and maintain quality records e.g. Request for Inspection(RFI) and verify as necessary. Coordinate on-site quality assuranceand control activities.

• To conduct independent Quality Assurance check on and off site.

• Report non-conformities to the QA/QC Manager and/or ProjectManager, perform analysis, identify root cause and proposecorrective actions.

• Maintain and control QA/QC practices on daily basis with regularchecks and inspections ensuring correct operation andimplementation of procedures.

• Advise and assist the project team members on QA/QC matters.Assist in the development of internal QA/QC checklists.

• Implement and enforce Quality Control Plan.

• Verification and checks on raw/incoming materials and/or FG.Documents for non-conforming works and corrective action.

• Identify and assess any foreseeable risk arising from workplace orwork processes, minimize environmental impact associated withthe manufacturing / assembly activities.

• Perform other duties as and when assigned/instructed byimmediate superior or higher management.

Job Requirements:

• Minimum Qualification: Diploma in Mechanical/Electrical orMarine Engineering Discipline Minimum 1-2 years of experience inMarine, Oil & Gas Industry

• Welding Certificate

• Good understanding of Marine/Offshore industry practices andstandards.

• Know-how in one or more of these areas GD&T, NDT, welding,steel fabrication, material casting, and machining technology willbe preferred.

• Familiar with ISO 9001 requirements & different marineclassification societies' standards and requirements will be anadded good knowledge of QMS and ability to implement, conductchecks and audit and upkeeping of documents etc.

• Project Management Skills

• A team player with good interpersonal and communication skills,attention to details, meticulous and independent. Goodorganizational, multitasking, prioritization, and effective timemanagement skills.

• Ability to think critically and resolve problems/issues. Positiveattitude, proactive and self-initiated.

• Ability to multi-task in a fast paced and dynamic environment

Highlights:

• Permanent job opportunity
• 5 days work week, normal office working hour
• Great remuneration & benefits
• Great career progression
• Entry level are welcome
• Location: Kallang

Responsibilities:

• Execute software testing, defect management, and quality assurance activities to support the delivery of high-quality products.
• Set up and configure test environments for product validation.
• Execute comprehensive tests based on product test specifications and predefined test cases.
• Support the maintenance of test documentation, including specifications, cases, records, and reports.
• Assist in reviewing products requirement lists and ensure products are qualified to meet site-specific requirements

Requirements:

• Diploma in Quality Assurance/Electronics/Computer Engineering/Computer Science or related field.
• 1 year of experience in software quality assurance
• Entry level are welcome
• Posses foundational knowledge of software testing and quality assurance, with the ability to execute tests, identify defects and maintain accurate documentation.
• Demonstrates attention todetail, analytical thinking, accountability, teamwork and a commitment todelivering quality products.
• Good interpersonal skills to interface with all levels, internally and externally in a professional and responsive manner.

HOW TO APPLY:
Interested applicants, kindly send your resume in MS WORD format to dicksern@trustrecruit.com.sg or please click on “Apply Now” and provide the below details in your resume.

• Last drawn salary
• Expected salary
• Notice period
• Reason for leaving

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Lim Dick Sern (Dick Sern)
EA Personnel Reg No: R22106832

The Opportunity

• Opportunity to work in a top government R&D agency in Singapore
• Working hours: 9am-9pm, 4334 shift cycle (Sun-Wed/Wed-Sun)
• Location: Nearest MRT Kent Ridge
• 12 months (convertible based on performance)
• Salary up to $3.5k!
• Training is provided!

Job Scope

• Operate semiconductor tools for wafer processing, measurement, and inspection
• Monitor tool/process status and perform basic fault recovery
• Execute process flows and coordinate tool usage; collect operational data
• Handle and transport wafer lots within cleanroom environments
• Support improvements, chemical handling (supervised), and strict EHS compliance

Requirements

• Minimum NITEC / Higher NITEC / Diploma in a relevant engineering field
• Experience in semiconductor equipment operation and basic troubleshooting is an advantage
• Exposure to assembly, build, testing, or preventive maintenance is a plus
• Able to work independently and in a team

Next Step

Prepare your updated resume, send to the following email: eugene.chia@adecco.com

*Only shortlisted candidates will be contacted*

Eugene Chia
Direct Line: 6697 7809
EA License No: 91C2918
Personnel Registration Number: R24124644

Working days: either 4 days 12 hours rotating shift or 5 days work week

Location: Islandwide , office at Woodlands

Salary: $2800 -$3500 depends on experience

Job scope:

• Semiconductor machines startup and installation

• Perform equipment on-site installation, diagnosing, troubleshooting, servicing, and repairing

• Perform equipment continuous improvement programmes, preventive maintenance, modifications and repairing works

• Serves as company contact point with customer on technical matters

• Attends to customers complaints and provides timely solutions

• Other ad hoc duties

Requirements:

• Nitec/ Diploma in Mechanical/ Mechatronic Engineering or related discipline

• Hands-on experience in semiconductor machine maintenance

• Able to work in cleanroom environment
  

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

ACMV Engineer (Air Conditioning and Mechanical Ventilation Engineer)

Working Days: Monday – Friday
Working Hours: 9am – 5.30pm
Salary: $ 3,800 - $ 5,000
Working Location: 70 Eunos Ave 7, Singapore 409569

Industry: Interior Design & Construction Company

Job Responsibilities:

• Design and planning of ACMV and MV systems
• Preparing and submitting tenders (Tender Costing)
• Conducting site surveys and managing the construction site (Site Management)
• Familiar with and arranging ACMV related services
• Assisting in the procurement of engineering equipment and materials (Procurement)
• Supervising on-site installation work to ensure compliance with drawings and specifications
• Assisting in testing and commissioning (T & C) Commissioning) Assisting with system troubleshooting and problem solving
   

Requirements:

• Diploma in Engineering-related experience (Mechanical, Electrical or construction services preferred)
• 2+ years of relevant work experience
• Familiarity with local regulations and standards preferred 

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

Electrical Engineer (Quality Control)

• Office: Jalan Besar / Lavender MRT
• Project Site: TUAS areas (Transport provided for designation MRT station to site office)
• Junior: $4000 to $4500, Senior: $4500 to $6000
• Working days: Mon to Fri 8/8.30am to 5/5.30pm, Sat may need works depends on site (if works 8 hours can claim allowances)

Requirements

• Diploma or Degree in Electrical Engineering or equivalent.
• At least 3-5 years’ experience in electrical QC for large-scale construction, industrial, or infrastructure projects.
• Strong knowledge of LV/MV electrical systems, standards, and QA/QC practices.

Job scopes

1) Implement and manage quality control procedures for electrical works on site.

2) Conduct inspections, audits, and testing of electrical installations, equipment, and materials.

3) Review and verify electrical shop drawings, material submissions, and method statements for compliance.

4) Monitor workmanship to ensure alignment with project specifications and quality standards.

5) Prepare non-conformance reports (NCRs), track corrective actions, and ensure timely closure.

6) Liaise with consultants, clients, and subcontractors to resolve quality related issues.

7) Maintain quality documentation, inspection records, and test reports.

8) Support handover and commissioning by ensuring all electrical quality requirements are met.

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Electrical Engineer

• Office: Jalan Besar / Lavender MRT
• Project Site: TUAS areas (Transport provided for designation MRT station to site office)
• Junior: $4000 to $4500, Senior: $4500 to $6000
• Working days: Mon to Fri 8/8.30am to 5/5.30pm, Sat may need works depends on site (if works 8 hours can claim allowances)

Requirements

• Diploma or Degree in Electrical Engineering or equivalent.
• At least 3-5 years relevant experience.
• Familiar with Singapore electrical standards, codes and PUB requirements.
• Able to interpret electrical drawings and technical specifications.
• Experience in the construction industry and Building Management System (BMS) projects is preferred.
• Proficient in MS Office; AutoCAD knowledge is an advantage.

Job scopes

• Coordinate and supervise electrical works for retrofitting, A&A, infrastructure, industrial, water treatment, or wastewater treatment projects.
• Interpret and review electrical drawings, technical submissions, method statements, and material submissions to ensure compliance with project requirements and applicable standards..
• Coordinate with consultants, contractors, subcontractors, and project teams to ensure smooth project execution and resolve technical issues.
• Monitor and oversee installation, testing, and commissioning of electrical systems, including LV power distribution, switchboards, MCCs, control panels, and ELV systems.

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Electrical Engineer

• Office: Jalan Besar / Lavender MRT
• Project Site: TUAS areas (Transport provided for designation MRT station to site office)
• Junior: $4000 to $4500, Senior: $4500 to $6000
• Working days: Mon to Fri 8/8.30am to 5/5.30pm, Sat may need works depends on site (if works 8 hours can claim allowances)

Requirements

• Diploma or Degree in Electrical Engineering or equivalent.
• At least 3-5 years relevant experience.
• Familiar with Singapore electrical standards, codes and PUB requirements.
• Able to interpret electrical drawings and technical specifications.
• Experience in the construction industry and Building Management System (BMS) projects is preferred.
• Proficient in MS Office; AutoCAD knowledge is an advantage.

Job scopes

• Coordinate and supervise electrical works for retrofitting, A&A, infrastructure, industrial, water treatment, or wastewater treatment projects.
• Interpret and review electrical drawings, technical submissions, method statements, and material submissions to ensure compliance with project requirements and applicable standards..
• Coordinate with consultants, contractors, subcontractors, and project teams to ensure smooth project execution and resolve technical issues.
• Monitor and oversee installation, testing, and commissioning of electrical systems, including LV power distribution, switchboards, MCCs, control panels, and ELV systems.

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Electrical Engineer

• Office: Jalan Besar / Lavender MRT
• Project Site: TUAS areas (Transport provided for designation MRT station to site office)
• Junior: $4000 to $4500, Senior: $4500 to $6000
• Working days: Mon to Fri 8/8.30am to 5/5.30pm, Sat may need works depends on site (if works 8 hours can claim allowances)

Requirements

• Diploma or Degree in Electrical Engineering or equivalent.
• At least 3-5 years relevant experience.
• Familiar with Singapore electrical standards, codes and PUB requirements.
• Able to interpret electrical drawings and technical specifications.
• Experience in the construction industry and Building Management System (BMS) projects is preferred.
• Proficient in MS Office; AutoCAD knowledge is an advantage.

Job scopes

• Coordinate and supervise electrical works for retrofitting, A&A, infrastructure, industrial, water treatment, or wastewater treatment projects.
• Interpret and review electrical drawings, technical submissions, method statements, and material submissions to ensure compliance with project requirements and applicable standards..
• Coordinate with consultants, contractors, subcontractors, and project teams to ensure smooth project execution and resolve technical issues.
• Monitor and oversee installation, testing, and commissioning of electrical systems, including LV power distribution, switchboards, MCCs, control panels, and ELV systems.

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Sales Region: 50% Singapore and 50% Asean (Malaysia, Indonesia and Philippines)

• New customers creation. To identifying potential customers with planning and organizing sales call schedule by cold calls or given sales leads. Candidate is also required to maintain and servicing of existing customers. Address sales and engineering support goals, contributing to weekly, monthly and annual sales report, analysing expenses, identifying inconsistencies and troubleshooting issues.
• Prepare and making of product presentation, provide product application support, demonstrate or performing of Installation on the appropriate sales engineering equipment according toorders, specificities and preferences.

• Communicate with Principals (Suppliers) and Sales team together to drive for achieving sales goal. Selected candidate will be receiving product training, which may include product information, product application, maintenance, service support or deal with system breakdowns that occurred.

• Achieve related duties and responsibilities as necessary to support, organize and monitor the success of the sales engineering department and productivity. Serve customers by identifying their needs and engineering adaptations of products, equipment, andservices.

• Identifies current and future customer requirements by establishing personal rapport with potential and actual customers and others in a position to understand their different need of product or service requirements. Prepare cost estimates by studying all related customer documents, consulting with engineers and other professional personnel.

• Determines improvements by analysing cost-benefit ratios of equipment, supplies, or service applications in customer environment and engineering or proposing changes in equipment, processes, or use of materials or services. Gains customer acceptance by explaining or demonstrating cost reductions and operations improvements. Develops customer’s staff by providing technical information and training.

• Complies with local legal requirements by studying existing and new legislation and anticipating future legislation. Prepares sales engineering reports by collecting, analysing, and summarizing sales information and engineering and application trends.

• Contributes to sales engineering effectiveness by identifying short-term and long-range issues that must be addressed, recommending options and courses of action, and implementingdirectives. Contributes to team effort by accomplishing related results as needed.

Requirement:

• Minimum Diploma/Degree in Electronics/Photonics Engineering or related engineering field.
• 2 years of experience in sales industry preferred. Those without experience are welcome to apply as training will be provided

• New customer development. Ready to make cold calls. Presentation & Communication skills. Technical understanding.

• Requirements analysis & innovation. Familiar with Microsoft Office software.

Others:

• Date of Commencement: ASAP or short notice  

• Transport Allowance: SGD$80 per month

• Variable Bonus: Yes (Twice a year, May & Dec)

• Working Hours: 830am to 530pm (Mon - Fri)

• Annual Leave: 10 days (+ 1 day per year, max 16 days)

Jessica Nguyen Huynh Thanh Truc

CEI Reg. No. R23113787

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

We are looking for motivated and aspiring Cloud Engineers who are passionate about cloud technologies and eager to start their careers in cloud infrastructure. This role is open to fresh graduates or candidates with up to 2 years of experience who are keen to learn and grow in a fast-paced technical environment.

You will have the opportunity to work with modern cloud platforms while gaining hands-on exposure to infrastructure deployment, cloud operations, and DevOps practices.

Key Responsibilities

1. Support the design, deployment, and management of cloud infrastructure across platforms such as AWS, Microsoft Azure, or Google Cloud Platform.

2. Assist in cloud migration, deployment, and infrastructure improvement projects.

3. Help provision and manage cloud resources using Infrastructure as Code (IaC) tools where applicable.

4. Monitor cloud systems to ensure availability, performance, and reliability.

5. Support routine maintenance tasks such as system patching, backup monitoring, and documentation updates.

6. Assist in configuring virtual networks, VPNs, firewalls, and cloud security settings.

7. Work with DevOps and development teams to support CI/CD pipelines and containerized applications.

8. Troubleshoot basic cloud infrastructure and network-related issues.

9. Prepare and maintain technical documentation, system diagrams, and operational reports.

Job Requirements

1. Open to fresh graduates or candidates with up to 2 years of experience.

2. Degree or Diploma in Computer Science, Information Technology, Cloud Computing, or related fields.

3. Basic knowledge of at least one cloud platform such as AWS, Microsoft Azure, or Google Cloud Platform.

4. Familiarity with cloud concepts, virtualization, or infrastructure fundamentals is an advantage.

5. Exposure to Infrastructure as Code tools (e.g., Terraform, CloudFormation, ARM) is a plus but not mandatory.

6. Basic understanding of container technologies such as Docker or Kubernetes is beneficial.

7. Knowledge of networking fundamentals such as IP addressing, VPC, VPN, firewalls, and load balancing is preferred.

8. Strong analytical thinking and willingness to learn new technologies.

9. Good communication skills and the ability to work both independently and within a team.

Preferred (Nice to Have)

• Cloud certifications such as AWS Certified Cloud Practitioner, Azure Fundamentals, or Google Associate Cloud Engineer.

• Academic or project exposure to cloud infrastructure, DevOps, or automation

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to chally@talentsis.com.sg for immediate processing.

Only shortlisted candidates will be notified.

Civil Engineer

• Location: within central area [1 – 2 sites]
• Salary: $2500 - $4000
• Working hours: 5.5 days mon - fri 8.30am - 6pm | Sat 830am - 12pm

Roles & Responsibilities

• Responsible for overall project management and coordination to new and existing projects with the proper monitoring of manpower allocation, project requirement and attendance of meeting, etc.
• Prepare, discuss and report project schedule, cash flow, budget, etc. with the management.
• Track and report weekly on project(s) completion.
• Track and forecast on monthly project revenue and expenses, etc and other key project metrics.
• Outline and determine project roles of team members based on respective project requirement, timeframe and budget.
• Outline and determine resource requirement (including staffing, software, hardware, equipment and facilities) of respective projects, based on project specification and requirement.
• Continually seeks opportunities to increase customer satisfaction and strengthen client relationships.
• Communicates effectively with clients to identify needs and evaluate alternative business solutions.
• Leads the respective project team to prioritize signed off project works based on analysis of strategic importance, tasks outstanding, obstacles or barriers, budget resources and deadlines.
• Establish and well documented and communicated schedule for all phases of project(s).

Requirements:

• Degree in Civil & Structural Engineering or its equivalent
• At least 3 years of relevant experience

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

• Provides highly visible customer support through the performance of on-site installation, as well as overseeing any necessary diagnoses, troubleshooting, service, and repair of complex equipment, systems, and software
• Checks out and approves operational quality of system equipment. Instructs customers in the operation and maintenance of the system.
• Serves as company liaison with customer on administrative and technical matters for assigned cases.
• Interprets customers’ needs and clarifies if the responsibility for problem resolution falls to sales personnel, customer support reps, or engineers.
• This job may include any aspect of field support, and is not limited to system hardware and software, networking/wireless networking.
• This job provides customer support. If employee is primarily responsible for supporting applications/systems engineering.
• Manage post implementation support issues (fault call tickets)
• Participate in regular operations review meetings, including operational issues, tickets review etc.
• Conduct internal training as part of knowledge sharing.
• Provide Level 1/2 operations support for Voice and network infrastructure.
• Perform changes to the network in-line with the organization’s Change Management processes.
• Ensure compliance to policies, processes, and standards, both internal and clients’ organization

Education & Certification

• Degree or Diploma in Computer Engineer, Computer Science, Information Technology, or related field Contact Center related certification

Requirement:

• Lead the Conversation with client, to understand the issue(s) face by the client and resolve the issue(s).
• Taking ownership and accountability of the issue list.
• Work / troubleshoot with vendors, principals, and colleagues on resolving the issue.
• Good troubleshooting and logical skill.
• Good documentation skills.
• Experience in raising and closure of ITSM.
• ITIL knowledge and experience is preferred.
• Understand Phones systems and Contact Center terminology is required.
• Team player, but also able to work independently when required.
• Interested to learn and pickup new skills.
• In-depth knowledge of Cisco Voice and Cisco Telepresence technologies and H323, SIP, MGCP, Q931 signalling protocols.
• Strong Knowledge of voice recording (NICE/ Verint), Contact Center, network routing &switching technologies, and protocols.
• Willing to work in extended hours and on duty.
• Analytical and possess good troubleshooting skills.
• Willing to work hard and eager to learn about new technologies.
• Polite and able to communicate well to the clients, client oriented.
• Hands on experience in the following products will be highly advantageous: CCNA, CCNP and CCIE (Voice)

Electrical Engineer (Quality Control)

• Office: Jalan Besar / Lavender MRT
• Project Site: TUAS areas (Transport provided for designation MRT station to site office)
• Junior: $4000 to $4500, Senior: $4500 to $6000
• Working days: Mon to Fri 8/8.30am to 5/5.30pm, Sat may need works depends on site (if works 8 hours can claim allowances)

Requirements

• Diploma or Degree in Electrical Engineering or equivalent.
• At least 3-5 years’ experience in electrical QC for large-scale construction, industrial, or infrastructure projects.
• Strong knowledge of LV/MV electrical systems, standards, and QA/QC practices.

Job scopes

1) Implement and manage quality control procedures for electrical works on site.

2) Conduct inspections, audits, and testing of electrical installations, equipment, and materials.

3) Review and verify electrical shop drawings, material submissions, and method statements for compliance.

4) Monitor workmanship to ensure alignment with project specifications and quality standards.

5) Prepare non-conformance reports (NCRs), track corrective actions, and ensure timely closure.

6) Liaise with consultants, clients, and subcontractors to resolve quality related issues.

7) Maintain quality documentation, inspection records, and test reports.

8) Support handover and commissioning by ensuring all electrical quality requirements are met.

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Electrical Engineer

• Office: Jalan Besar / Lavender MRT
• Project Site: TUAS areas (Transport provided for designation MRT station to site office)
• Junior: $4000 to $4500, Senior: $4500 to $6000
• Working days: Mon to Fri 8/8.30am to 5/5.30pm, Sat may need works depends on site (if works 8 hours can claim allowances)

Requirements

• Diploma or Degree in Electrical Engineering or equivalent.
• At least 3-5 years relevant experience.
• Familiar with Singapore electrical standards, codes and PUB requirements.
• Able to interpret electrical drawings and technical specifications.
• Experience in the construction industry and Building Management System (BMS) projects is preferred.
• Proficient in MS Office; AutoCAD knowledge is an advantage.

Job scopes

• Coordinate and supervise electrical works for retrofitting, A&A, infrastructure, industrial, water treatment, or wastewater treatment projects.
• Interpret and review electrical drawings, technical submissions, method statements, and material submissions to ensure compliance with project requirements and applicable standards..
• Coordinate with consultants, contractors, subcontractors, and project teams to ensure smooth project execution and resolve technical issues.
• Monitor and oversee installation, testing, and commissioning of electrical systems, including LV power distribution, switchboards, MCCs, control panels, and ELV systems.

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279

About the Team:

As part of the Search, Recommendation, Ads (Engineering & Architecture) team, We build and operate the search engine that powers retrieval and ranking across the company. The system is built on Vespa (a ~1.7M-line C++/Java codebase) and runs at scale across hundreds of nodes. Our work spans the full stack: cluster orchestration, HNSW-based vector indexing, rank expression evaluation, capacity planning, and the developer tooling that keeps all of it shippable. We care a lot about correctness, latency tails, and operational simplicity.

Job Description:

• Design, implement, and operate components of the search engine — indexing, query execution, ranking, or storage using C++

• Improve indexing and retrieval performance: SIMD-friendly data layouts, cache-aware algorithms, lock contention

• Extend vector search capabilities (HNSW and beyond) and integrate them cleanly with traditional inverted-index retrieval

• Build tooling and automation that makes the team faster — capacity models, fault-injection tests, deployment checks, AI-assisted workflows

• Participate in design reviews, code reviews, and on-call rotation

Job Requirements:

• Bachelor's Degree or higher in Computer Science or related field

• At least 5 years of full time backend development experience using C++/Go/Python

• Experience working on Vespa Search Engine is preferred

• Familiarity with vector search and ANN algorithms (HNSW, IVF, PQ).

• Solid foundation in data structures, algorithms, and systems. You can reason about cache behavior, memory layout, and concurrency..

• Experience operating non-trivial services in production: profiling, debugging core dumps, reading flamegraphs, tracing distributed requests.

• Comfortable working in a large existing codebase. 

• Strong written communication. You write design docs and PR descriptions that the next on-call can actually use.

• 1 year contract (renewable/ convertible)

• Working Location: Boon Lay

• Working Hours: Mon-Fri (7.30am - 5.15pm) + Cover shift if required

• Salary range: $4000 + Completion Bonus

Job Responsibilities:

• Plan and coordinate manpower, materials and equipment to execute projects

• Oversee day-to-day production activities, ensuring schedules are met and identifying bottlenecks or inefficiencies

• Collaborate with Quality and Engineering teams on root cause analysis and corrective actions for production non-conformities

• Handle product acceptance with customers

• Develop and maintain documentation including risk assessment, production records and forms

• Train operators and production staff on processes, equipment usage and maintenance

• Perform other ad-hoc duties as assigned

Job Requirements:

• Degree/Diploma in Mechanical/Mechatronic/Industrial Engineering

• Minimum 2 years relevant experience in manufacturing/production industry

• Basic ability to read and interpret technical drawings

• Basic proficiency in CAD software such as SolidWorks

If you are interested, please submit your application here. We appreciate your application and will notify you if you are shortlisted for the role.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Outsourcing Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persoloutsourcing.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

EA License No: 90C3494 | EA Personnel No: R21103663 | EA Personnel Name: Azhar Anuwar

• 1 year contract (renewable/ convertible)

• Working Location: Rifle Range (nearest MRT - King Albert Park

• Working Hours: Mon-Fri (7.30am - 5.15pm) + Cover shift if required

• Salary range: $4000 + Completion Bonus

Job Responsibilities:

• Plan and coordinate manpower, materials and equipment to execute projects

• Oversee day-to-day production activities, ensuring schedules are met and identifying bottlenecks or inefficiencies

• Collaborate with Quality and Engineering teams on root cause analysis and corrective actions for production non-conformities

• Handle product acceptance with customers

• Develop and maintain documentation including risk assessment, production records and forms

• Train operators and production staff on processes, equipment usage and maintenance

• Perform other ad-hoc duties as assigned

Job Requirements:

• Degree/Diploma in Mechanical/Mechatronic/Industrial Engineering

• Minimum 2 years relevant experience in manufacturing/production industry

• Basic ability to read and interpret technical drawings

• Basic proficiency in CAD software such as SolidWorks

If you are interested, please submit your application here. We appreciate your application and will notify you if you are shortlisted for the role.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Outsourcing Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persoloutsourcing.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

EA License No: 90C3494 | EA Personnel No: R21103663 | EA Personnel Name: Azhar Anuwar

Job Description

• Industry/ Organization Type: Cooling Solutions Provider
• Position Title: Service Engineer
• Working Location: Kaki Bukit
• Working Hours: 5.5 Days, Monday – Friday (9am – 6pm), Saturday (9am – 1pm)
• Salary Package: Basic Salary + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Perform periodic servicing, preventive maintenance, and troubleshooting of CRAC/ WDS and related systems.
• Diagnose hardware and software faults, identify root causes, and implement effective solutions.
• Execute equipment power-up/ down procedures and respond promptly to emergency service calls (e-calls).
• Provide technical support and onsite training to clients on Operation & Maintenance Manuals (OMM).
• Build and maintain strong client relationships, working closely with site engineers and customer engineering teams.
• Prepare detailed service reports and submit regular (weekly/ monthly) updates on activities, progress, and corrective actions.
• Monitor contractor activities, ensuring compliance with safety, operational procedures, and quality standards.
• Ensure adherence to data center safety regulations and support ad-hoc tasks assigned by management.

APPLY NOW!!!

• Minimum ITE/ Diploma in Mechanical or Electrical Engineering (or equivalent).
• With hands-on experience in maintenance and troubleshooting electrical and mechanical systems, preferably dealing with ACMV/ DX systems.
• Possess practical knowledge of CRAC/ WDS or critical infrastructure is an added advantage.
• Good problem-solving, analytical, and communication skills (both written and verbal).
• Willing to commit for standby duties, and ability to perform manual work in data center environments.
• Candidates without experience are welcome to apply, training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #83561 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Product area

It's an exciting time to join Google Cloud’s Go-To-Market team, leading the AI revolution for businesses worldwide. You’ll excel by leveraging Google's brand credibility—a legacy built on inventing foundational technologies and proven at scale. We’ll provide you with the world's most advanced AI portfolio, including frontier Gemini models, and the complete Vertex AI platform, helping you to solve business problems. We’re a collaborative culture providing direct access to DeepMind's engineering and research minds, empowering you to solve customer challenges. Join us to be the catalyst for our mission, drive customer success, and define the new cloud era—the market is yours.

Job description

As a Generative AI (GenAI) Forward Deployed Engineer (FDE) at Google Cloud, you are an embedded builder who bridges the gap between frontier AI products and production-grade reality within partners for our customers. Unlike traditional advisory roles, you will function as an innovator-builder, moving beyond high-level architecture to code, debug, and jointly ship bespoke and scalable agentic solutions directly with our partners, for and within the customer’s environment. You will address blockers to production including solving the integration complexities, data readiness issues, and state-management issues that prevent AI from reaching enterprise-grade maturity. By embedding with strategic partners, you will serve a dual purpose: providing white glove deployment of complex AI systems and acting as a critical connector and feedback loop for the partner to Google, transforming real-world field and partner insights into Google Cloud’s future product roadmap. You will serve as the agent engineer bridging the gap between AI prototypes and production-grade reality for our strategic AI partners and their own FDE teams.

Qualifications

Job responsibilities

• Serve as a team lead and developer within the strategic AI partner for complex AI applications, working with the partner’s own teams to transition from rapid prototypes to production-grade, replicable agentic workflows (e.g., multi-agent systems, MCP servers) that drive measurable return on investment (ROI).
• Build high-performance evaluation pipelines and observability frameworks to ensure partner developed agentic systems meet rigorous requirements for accuracy, safety, and latency.
• Identify repeatable partner and field patterns and friction points in Google’s AI stack, converting them into reusable modules or formal product feature requests for the Engineering teams.
• Co-build with a strategic AI partner’s forward deployed engineering teams to instill Google-grade development best practices.
• Help partners to build their own agentic delivery capabilities to set them up for long term success, focusing on the ROI at customer engagements ensuring customer activation.

Minimum qualifications

• Bachelor’s degree in Engineering, Computer Science, a related field, or equivalent practical experience.
• 8 years of experience with software development using Python or similar coding languages.
• Experience architecting AI systems on cloud platforms (e.g., Google Cloud Platform).
• Experience building pipelines for structured and unstructured data using both vector databases and RAG-like architectures to power enterprise AI solutions.
• Experience taking production-grade AI-driven solutions from conception to launch for customers.
• Experience leading technical discovery sessions with customers.

Preferred qualifications

• Master’s degree or PhD in AI, Computer Science, or a related technical field.
• Experience implementing multi-agent systems using frameworks (e.g., LangGraph, CrewAI, ADK) and complex patterns (e.g., ReAct, self-reflection, hierarchical delegation).
• Knowledge of Large Language Model native metrics (e.g., tokens/sec, cost-per-request) and techniques for optimizing state management and granular tracing.

ISO QA Engineer

• Office Location: Loyang, Singapore
• Working Hours: Mon – Fri 8am – 5.30pm,
• Monthly Salary: Basic up to $4000 + AWS + Variable Bonus (VB)
• Employment Type: Full time, Permanent Contract

Company Overview

The company specializes in delivering high-precision solutions for complex moulding applications, supporting clients from initial concept through to full-scale production. With a strong focus on quality and collaboration, the company helps transform ideas into commercially viable products. As the company continue to grow, the company remain dedicated to advancing our capabilities and driving progress within the industry.

Responsibility

• Supplier Partnership Management – Lead onboarding, evaluation, audits, and agreement reviews to strengthen supplier relationships.

• Performance Monitoring – Assess supplier performance, identify improvement opportunities, and drive quality enhancements.

• Qualification Support – Oversee new supplier and material qualification, ensuring documentation accuracy and compliance with standards.

• Issue Resolution – Coordinate with suppliers and internal teams on material issues, SCAR processes, and corrective actions.

• Quality Assurance – Implement inspection standards, manage CAPA closure, and address non‑conformance reports and customer complaints.

• Compliance & Continuous Improvement – Lead MRB meetings, maintain ISO documentation, conduct audits, and develop action plans for ongoing compliance.

Requirement

• Diploma in Quality Management / engineering / Manufacturing or related field
• Minimum 2 years of relevant working experience in handling audits and ISO documentation in manufacturing industries.
• Familiarity with supplier management processes
• Familiarity with Quality Management Systems including ISO 9001, ISO 14001, ISO 13485, and ISO 22301
• Proficient in quality tools such as PFMEA, Control Plans, and Gage R&R (Repeatability & Reproducibility)
• Proficient in structured problem-solving tools such as 8D and 5 Whys methodologies.
• Good interpersonal and communication skills, with the ability to coordinate effectively.
• Candidate who can start immediately or within short notice will be preferred

We regret to inform you that only shortlisted applicants will be notified.

Recruit Lync Pte Ltd | EA License Number: 22C1000

Chen Hoe Nam | EA Personnel License: R25158678

Documentation & Quality Records

Prepare, maintain, and organize QA/QC documentation for ongoing projects.

Ensure inspection records, reports, and quality-related documents are properly filed, updated, and maintained.

Prepare material submittals, inspection checklists, test reports, and handover documentation.

Maintain document control for drawings, method statements, technical submissions, and project records.

Track and monitor material certificates, calibration certificates, and testing reports for compliance and traceability purposes.

QA/QC Coordination

Coordinate with project, engineering, production, and site teams for submission and collection of QA/QC records and documents.

Support QA/QC Engineers during inspections, audits, and quality-related activities.

Ensure documentation complies with client requirements, project specifications, and company quality procedures.

Compliance & Audit Support

Ensure proper record traceability and compliance with company quality management procedures.

Assist in maintaining quality procedures, forms, templates, and standard documentation.

Reporting & Administrative Support

Prepare weekly and monthly QA/QC reports and quality tracking updates.

Maintain and update quality logs, document registers, and monitoring records.

Ensure proper filing and organization of both softcopy and hardcopy QA/QC documents.

Perform other ad-hoc QA/QC administrative and coordination duties assigned by management.

Job Description & Requirements

· Preparing inspection testing plan for all welding activities

·Conducting material inspection and material traceability

·Prepare, review of Welding Procedure Specifications (WPS) based on ASME and EN Standards ·Conduct a welding procedure and welder qualification tests

·Coordinate with client inspector for site & workshop inspection activities for piping, structural and equipment like heat exchangers pressure vessel, column

·Review the calibration status and keep a calibration log of test equipment

·Verify in process inspection, final inspection and welding

·Carry out Welding control and inspection . .

·Record result of inspections and maintain records of specific items as per client specifications ·Raise RFI request to Client and 3rd party and coordinate for inspection as identified ITP hold points

·Reviewing incoming material with Mill test certificates, Dimensional check and physical condition check

·Checking and verifying of receiving materials (pipes, flanges, fitting, Valves & Equipment, etc.,,) as per MTO, ensure that materials are correct according to the specification and description upon received

·Conduct inspection during all phases of fabrication, prior welding, during welding and after welding preparing Daily Welding Reports (DWR)

·Witnessing nondestructive testing (NDT) activities to follow up and confirm repairs, re-testing and re-inspection in accordance with specifications

·Witnessing post weld heat treatment (PWHT), Heating method & temperature record system ·Witnessing positive material identification (PMI), verify that all PMI of material has been performed as per specification

·Reviewing of RT, UT, MT, PT, PMI, PWHT & Hardness Test Reports

·Preparing welding surveillance report as per client requirement

·Prepare the of weld & NDT summary

·Completing/Endorsing all inspection records from initial inspection to final acceptance of weld joints

·Coordination with Client/its Representative /Third party inspector/ Suppliers for inspection requirements of the project

·Review hydro-test procedure and preparing hydro-test packages and spool release & Weld History documents

·Ensure that calibration certificate of test instruments such as pressure gauge, relief valve, manifold, pressure and temperature recorder prior to hydro test

·Ensure that the correct rating gaskets are installed

·Ensure that the A- punch list items Shall be closed before hydro test

·Witnessing & visual Inspection of pipeline internal cleaning /gauging

·Witnessing valve Hydro test in different ratings

·Witnessing valve installation, spool installation and bolt tightening

·Witnessing of pneumatic test, hydro-test, flushing

· Line check before commissioning activities and assist in Punch list preparation and punch list items closing

·Coordination with construction Team for Re-Instatement activities

·Preparing and maintaining QA/QC documents and final test packages for system lay-up.
. Coordinate with project managers, engineers, construction teams, and client representatives.

ALG is currently hiring QA Technicians for our client based in Singapore. Our client is known for designing, manufacturing, and servicing systems and components for the aerospace and defense industries.

Roles and Responsibilities

• Perform incoming quality control (QC) inspections and testing, and maintain proper records.
• Manage vendor documentation, including checklists, test data, and mill certificates.
• Organise and maintain engineering drawings and incoming QC documents.
• Maintain and calibrate instruments and equipment as per schedule.
• Support the QA Engineer in quality evaluations and data analysis.
• Provide quality-related information to assist in decision-making.
• Report any gauges, fixtures, or measuring tools that are out of calibration, damaged, worn-out, or missing.
• Assist other departments with special measurement or product/component testing when delegated.
• Undertake other duties as assigned by the QA Engineer or QA Manager.

Job Requirements

• NITEC /Higher NITEC in Precision Engineering or equivalent
• At least 2 years working experience in aerospace industry

If you are interested in this role, please APPLY NOW! Please note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R23115729