Responsibilities:

• Carry out design review of C&S and geotechnical design and analysis for coastal structures such as quay wall, port, jetty, revetment and land reclamation etc. for local and/or oversea projects
• Assist the Design Manager to coordinate, manage, and oversee all design related matters including:
• Ensure design coordination, document submission from Contractor is in accordance with the time schedule
• Ensure Instructions issued by Employers are co-ordinated with the Contractors
• Study and review of submissions from the Contractors
• Resolve design discrepancies or technical conflicts which may arise from the Contractor while carrying out the construction works
• Co-ordinate with Contract and Construction team and provide necessary information or correspondences on changes which deviate from the contract and may lead to time and cost implications.
• Chair all design coordination meetings.
• Assist the Project Lead / Project Manager to carry out:
• Review on plan for Site investigation and result interpretation,
• Review on C&S, environmental and geotechnical design and analysis for coastal structures such as quay wall, port, jetty, revetment and land reclamation (i.e. deep and shallow foundation, temporary and permanent retaining system, soil improvement, instrumentation, etc.)
• Managing sub-contracts (i.e. soil investigation contract, Accredited Checker contract, biodiversity contract etc.)
• Managing main contracts
• Supervise both design and/or site work
• Prepare technical reports and submission to Clients and Authorities (i.e. GIR, concept design, detailed design, risk assessment, ground improvement, etc.)
• Ensure all engineering works comply with all relevant statutory standards, regulations and Codes of Practice
• Engage and manage stakeholders, such as clients, design team, site team and other relevant parties
• Support on pursue project: assist in tender submission
• Assist in other Coastal department activities i.e: beach clean up, sports day, etc

Qualifications:

• Bachelor/Master Degree in Civil / Environmental Engineering from recognised and reputable university
• Minimum 5 years of relevant civil engineering experience in large scale infrastructure/reclamation projects

Required Skills:

• Possess the skill, knowledge and ability to manage and co-ordinate all the design activities
• Strong written and verbal communication skills in English
• Team player and able to multi-task
• Discipline, self-motivated and resourceful
• Experience in contract administration will be advantageous
• Well-versed in Microsoft Office Suite of Software (e.g. Word, PowerPoint, Excel etc)
• Proficiency in engineering software such as AutoCAD, Civil 3D, Plaxis etc

Job Summary

We are seeking a proactive Fire Protection Engineer to design, coordinate, and implement fire protection systems (alarms, sprinklers, dry risers, hose reels). You will ensure compliance with Singapore’s fire safety codes and liaise closely with consultants, site teams, and authorities like SCDF and FSSD.

Key Responsibilities

System Design & Coordination

• Design & Review: Develop fire protection systems following SCDF/FSSD regulations, Singapore Fire Code, and project specs.

• M&E Coordination: Coordinate fire services with architects, consultants, and other trades.

• Technical Drawings: Prepare design calculations, layout drawings, and schematic diagrams.

Submission & Compliance

• FSSD Submissions: Prepare and submit fire safety plans and calculations for approval.

• Stakeholder Liaison: Work with QPs and RIs for submissions, site inspections, and clearances.

• Standards Compliance: Ensure all systems align with SS CPs, local codes, and relevant NFPA standards.

Project Implementation & Supervision

• Site Inspections: Verify that on-site installations match design intent and safety standards.

• Technical Support: Assist site teams with material selection, troubleshooting, and system integration.

• Testing & Commissioning: Prepare inspection documents, test reports, and assist in the T&C process.

Documentation & Tenders

Project Handover: Assist with as-built drawings and O&M manual preparation.

Commercial Support: Provide technical input for project tenders and variation claims.

Qualifications

- 3 years experience in Fire Protection trade

Employment type: 1-year contract (Renewable)
Location: Ang Mo Kio
Working Days/ Hours: Mon-Fri 8:30am to 6pm
Eligibility: Singaporean ONLY

Job Overview:

We are looking for a Technical Specialist with AI competencies to support the development and implementation of digital learning applications, including Learning Management Systems (LMS) and other learning technology platforms.

This role involves designing, integrating, and maintaining intelligent learning solutions that enhance user experience, personalize learning pathways, and improve platform capabilities through AI technologies. The ideal candidate will combine strong software engineering skills with knowledge of AI tools and technologies applied to learning environments.

Key Responsibilities:

Learning Application Development

• Develop, customize, and maintain learning applications such as Learning Management Systems (LMS) and other digital learning platforms.

• Support system implementation, configuration, and deployment of learning technologies.

• Ensure applications are scalable, secure, and aligned with system architecture standards.

AI Integration & Development

• Design and integrate AI-powered features into learning platforms, such as recommendation engines, chatbots, or adaptive learning tools.

• Work with AI frameworks and APIs to enhance learning analytics, learner engagement, and personalization.

• Explore and implement AI-driven solutions to improve content discovery, learner support, and performance tracking.

System Integration

• Integrate LMS platforms with other enterprise systems (e.g., HR systems, authentication systems, analytics platforms) using APIs and middleware.

• Ensure compatibility with e-learning standards such as SCORM, xAPI, or LTI.

Testing & Optimization

• Conduct system testing, debugging, and performance optimization for both application and AI components.

• Monitor platform performance and identify opportunities for improvement.

Collaboration

• Work closely with instructional designers, project managers, and product teams to translate learning requirements into technical solutions.

• Collaborate with data engineers and AI specialists to implement machine learning models and intelligent features.

Documentation & Support

• Maintain technical documentation for system architecture, integrations, and AI components.

• Provide technical troubleshooting and support during system implementation and deployment.

Skills & Experience Required

• Technical Skills: Experience in software development using Python, JavaScript, C#, or Java. Knowledge of HTML5, CSS, REST APIs, microservices architecture, and Learning Management Systems (LMS) or learning technology platforms. Hands-on experience with relational databases such as Microsoft SQL Server, MySQL, or PostgreSQL.
• AI & Data Competencies: Familiarity with AI/ML frameworks such as TensorFlow, PyTorch, or Scikit-learn. Experience integrating AI APIs/services including NLP, recommendation engines, or chatbot frameworks. Understanding of learning analytics, data processing, and AI-driven personalization.
• Systems & Integration: Experience integrating enterprise systems through APIs or middleware. Understanding of cloud platforms such as AWS, Azure, or Google Cloud. Familiarity with SCORM, xAPI, LTI, or other digital learning standards is advantageous.
• Soft Skills: Strong analytical, problem-solving, and communication skills, with the ability to translate technical concepts into practical solutions and work effectively in cross-functional teams.
• Systems Administration: Knowledge of user access management, data backup processes, and security protocols in cloud-based environments.
• Project Collaboration: Experience working with both technical and non-technical stakeholders in collaborative project environments.
• Attention to Detail: Ability to ensure configurations, customizations, and integrations meet required specifications and standards.

Preferred Qualifications

• Bachelor’s degree in Computer Science, Information Technology, Engineering, or related field
• Certifications: Relevant certifications in AI, cloud platforms, or software engineering are an advantage. (e.g., Machine Learning, AWS, Microsoft, LMS-specific certifications).
• Experience with Cloud-Based Systems: Experience with cloud platforms like AWS, Azure, or Google Cloud, particularly in the context of learning platforms
• Experience with SCORM/ xAPI: Familiarity with e-learning standards like SCORM, xAPI, and Tin Can API for tracking and reporting learning activities.
• Familiarity with Data Security: Knowledge of data security practices, especially as they apply to sensitive learning and employee data.

Develop Lifting Plans: Establish critical rigging math, calculations, and lifting sequences for complex or tandem lifts.

Assess Environmental Conditions: Evaluate ground bearing capacity, wind speed limits, and nearby overhead power lines.

Select Machinery: Choose the correct crane models, boom configurations, and certified lifting gears (slings, shackles, spreader beams) based on load attributes.

Coordinate the Team: Instruct and define clear boundaries for the Lifting Supervisor, Signalman, and Crane Operator.

Enforce Safety Boundaries: Oversee the implementation of physical exclusion zones to prevent personnel from walking under suspended loads.

• MNC (Woodlands)

• Company Transport Provided

• Basic: $5500 to $7000+ AWS + VB

• Excellent Benefits + Career Progression

• Process Manufacturing Plant
  

Job Responsibilities:

• Assist in managing daily production operations to ensure smooth and efficient plant operations

• Monitor production performance, process efficiency, product quality, and operational KPIs

• Coordinate manpower planning, production scheduling, and machine utilization to meet production targets

• Work closely with maintenance, warehouse, and utilities teams to minimize downtime and operational disruptions

• Support troubleshooting, process optimization, and continuous improvement initiatives within the plant

• Ensure compliance with GMP, HACCP, FSSC22000, workplace safety, and food quality standards

• Investigate production deviations and implement corrective and preventive actions

• Lead and supervise production operators, technicians, and shift personnel
  

Requirements:

• Degree / Diploma in Chemical Engineering, Food Technology, Manufacturing, or related discipline

• Minimum 5 years of production experience in edible oil, food manufacturing, FMCG, refinery, chemical, or process plant environment
  

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities

• Current and Expected salary

• Reason for leaving

• Date of availability

• Education background
  

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description:

We are looking for a highly motivated and skilled Junior Sous Chef to join our dynamic culinary team. The ideal candidate will support our Sous Chef in managing daily kitchen operations, ensuring the highest standards of food quality, and upholding the unique flavors of our Nyonya cuisine. This is a fantastic opportunity for someone with a strong culinary background, leadership experience, and a passion for heritage food.

Key Responsibilities

• Oversee the preparation of sauces, stocks, and base components to ensure consistent flavour profiles
• Monitor cooking temperatures, timings, and batch quality to maintain product standards throughout the day
• Coordinate production schedules to meet daily order requirements, catering demands, and outlet replenishment
• Conduct regular checks on equipment (steamers, stoves, ovens, etc.) to ensure they are functioning safely and efficiently
• Assist in implementing workflow improvements to enhance productivity and reduce bottlenecks in the kitchen
• Support the standardization of recipes and ensure all team members follow SOPs accurately
• Ensure smooth handover between shifts with proper documentation of production levels, issues, and outstanding tasks
• Assist in training staff on new machinery, tools, or updated cooking techniques as required
• Uphold strict hygiene, food safety, and cleanliness standards across the production area
• Take charge in the Sous Chef’s absence and lead the team to ensure smooth operations

Qualities:

• At least 2 years of relevant working experience
• Expertise in cooking Nonya cuisine not necessary but an added advantage
• Possess passion and interest in new recipes and products
• A team player who works efficiently to fulfil the production demands
• Willing to keep learning to broaden knowledge and harness new methods of production

Interested applicants, you may either apply via here or sent an email at hr@harrianns.com.

At present, we do not require assistance from recruitment agencies. All applications should be submitted directly by candidates.

• Period: 1 year contract (Renewal/ Convertible)

• Location: Boon Lay

• Working Hours & Days: Mon to Fri (7.30am to 5.15pm)

• Salary: Up to $4000 + Completion Bonus

Job Responsibilities:

• Performs system integration and testing according to work instruction or procedure and test plan

• Performs all duties in a safe manner and keeps all employees aware of dangers in work area

• Supervise and coordinate daily production activities to meet production targets, ensuring efficient utilization of resources and adherence to production schedules

• Lead and mentor a team of production assemblers and test operators, providing guidance, training, and support to ensure a high level of productivity, quality, and safety

• Monitor production processes, identify bottlenecks, and implement process improvements to optimize productivity and reduce waste

• Manage production stores inventory

• Track and analyze production metrics, such as yield, and cycle time, and take appropriate actions to achieve performance targets

• Conduct regular inspections and audits to ensure compliance with safety regulations, maintaining a safe work environment for all employees

• Practices good housekeeping at all times in the work area

Job Requirements:

• Diploma in Engineering/manufacturing, or a related field is preferred

• 2-3 years managing production staff and processes, includes supervising, planning, and directing production to produce quality products

• Ability to train and motivate line employees to achieve production goals

• Proficient in MS office

• Proficiency in using manufacturing software systems, such as manufacturing execution systems (MES)

If you are interested, please submit your application here. We appreciate your application and will notify you if you are shortlisted for the role.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Outsourcing Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persoloutsourcing.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

EA License No: 90C3494 | EA Personnel No: R21103663 | EA Personnel Name: Azhar Anuwar

Dear Applicant,

If you or someone you know isinterested, please send the CV directly to VeronicaE@evolutionjobs.sg (mostpreferred, as I may overlook some CVs due to the high volume).

Please note that visasponsorship is not available at this time.

JD

Key Responsibilities:

• To handle level 2 production support activities including review upcoming changes, resolve incident tickets, raise problem ticket, support system maintenance and document knowledge base to shift demand to level 1 production support etc.
• To provide support during end of day batch run
• To work with various stakeholders (i.e., incident management, level 2 (group) and level 3 production support, data centre operation, user operation, infrastructure support etc) to resolve major incident.
• To work with various stakeholders (i.e., service automation, level 2 (group) and level 3 production support etc) to implement application monitoring, report and dashboard.

• Period: 1 year contract (Renewal/ Convertible)

• Location: Rifle Range Army Camp (King Albert Park MRT)

• Working Hours & Days: Mon to Fri (7.30am to 5.15pm)

• Salary: Up to $4000 + Completion Bonus

Job Responsibilities:

• Performs system integration and testing according to work instruction or procedure and test plan

• Performs all duties in a safe manner and keeps all employees aware of dangers in work area

• Supervise and coordinate daily production activities to meet production targets, ensuring efficient utilization of resources and adherence to production schedules

• Lead and mentor a team of production assemblers and test operators, providing guidance, training, and support to ensure a high level of productivity, quality, and safety

• Monitor production processes, identify bottlenecks, and implement process improvements to optimize productivity and reduce waste

• Manage production stores inventory

• Track and analyze production metrics, such as yield, and cycle time, and take appropriate actions to achieve performance targets

• Conduct regular inspections and audits to ensure compliance with safety regulations, maintaining a safe work environment for all employees

• Practices good housekeeping at all times in the work area

Job Requirements:

• Diploma in Engineering/manufacturing, or a related field is preferred

• 2-3 years managing production staff and processes, includes supervising, planning, and directing production to produce quality products

• Ability to train and motivate line employees to achieve production goals

• Proficient in MS office

• Proficiency in using manufacturing software systems, such as manufacturing execution systems (MES)

If you are interested, please submit your application here. We appreciate your application and will notify you if you are shortlisted for the role.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Outsourcing Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persoloutsourcing.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

EA License No: 90C3494 | EA Personnel No: R21103663 | EA Personnel Name: Azhar Anuwar

Responsibilities

• Perform daily production operations i.e. material preparation, charging, sampling, reaction monitoring, and workup activities.
• Operate and monitor manufacturing equipment in compliance with SOP, GMP, and safety requirements.
• Execute and maintain accurate Electronic Batch Records (EBR) and production documentation.
• Support troubleshooting, equipment cleaning, housekeeping, and preventive maintenance activities.
• Assist supervisors in achieving production targets and continuous improvement initiatives.
• Able to adept in new start up Pharmaceutical / Biotech plant.

Requirements

• Diploma / Degree in Chemical, Pharmaceutical, Mechanical or relevant Engineering field.
• 1 year of experience or candidate with trainee experience but willing to be trained.
• Basic knowledge of GMP, EHS, and manufacturing operations in a plant environment.
• Able to follow procedures, perform documentation accurately, and work independently.
• Willing to rotating shifts and in a fast-paced manufacturing environment.
• Good communication in English & Mandarin to liaise with Subject Matter Experts in Headquarters.

GMP Technologies (S) Pte Ltd | EA License 11C3793 | EA Personnel: Novita Widjaja |Registration No: R22105960

Job Responsibilities:

• Responsible for Full-chip Physical Verification Sign-off in area of (DRC, LVS, ANT, ERC, ESD, PERC) for tape-out.
• Co-work with Place & Route team to resolve full-chip layout integration issues.
• Coordinates with internal IP owners on IP related issues.
• Coordinates with Manufacturing Team on DRC related issues.
• Provide automation solutions to improve efficiency in tape-out flow.
• Report on tapeout PV issues.

Requirements:

• Bachelor/master’s degree in electrical/Electronic Engineering/Computer Science
• Familiar with IC Design front-to-backend flow
• Preferably well-versed in Calibre, ICV, Assura, Star-RCXT
• Proficient in script programming, such as Python, TCL, Perl, or C-shell
• Proficient in UNIX (Linux) platforms
• Strong communication skills, problem solving and analytical skills.
• Experience with 3D IC design (e.g., CoWoS, SoIC, EMIB) is a plus.

Location: One North, Singapore

Job Description:

• In charge of providingengineering support for product modifications, cost reductions, manufacturing process improvementsResponsible f
• In charge of leading and participating in design and development activities from concept to production with a well-defined Product Development Process.
• Responsible in driving successful development of new product development projects, research and develop ideas for new and improved designs of the components part
• In charge of generating design specifications, design proposals and/or product designs that meet customer requirements.
• Responsible in working with cross-functional team involved in new product development and manufacturing

Job Requirement:

• Minimum Degree in Mechanical/ Manufacturing/ Electronics Engineering or related field
• Minimum 2 years of working expereince in product design in components

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description

• Responsible in analyzing and troubleshooting customer issues via phone or email as well as on-site
• Taking charge of conducting product application testing for sales reps and customers.
• Responsible in conducting post sales application training to customers.
• In charge of receiving phone calls or emails from sales reps and customers and answering to the enquiries concerning product capabilities, specifications, and applications
• Responsible in creating and updating manuals for post sales application training for customers.
• Responsible to travel yo customer’s site for on-site support including setup, adjustment/ finetuning the system.
• In charge of assisting sales engineer with on-site presentations to customers when required
• Other duties or projects, as assigned

Requirements

• Minimum Diploma in Electrical / Electronic Engineering or equivalent
• Minimum 1 Years of working experience in industrial equipment industry
• Familiar with Logic control, Microsoft Excel skills, communication protocol (i.e Serial, Modbus TCP, Ethernet, EIP etc.) and HMI programming

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Identify and manage projects and sales opportunities and develop new accounts to drive revenue growth with potential & existing customer.
• Prepare and deliver technical presentations explaining product or services to existing and prospective customers.
• Understand customers’ needs and competitors in order to develop strategy to win sales.
• Liaise and work closely with sales support staff/application engineer.
• Provide sales and first-level technical support to all customers’ enquiries, deliveries and issues or feedback.
• Product selection and generate quotations based on RFQ.
• Project sales management and submission of Sales Report.

Job Requirements:

• Min Diploma in Engineering (Mechanical) or equivalent.
• Min 1 years of working experience in the related field is required.
• Possess Class 3 Driving License.

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.

EA License No: 17C8900

Job Description:

• In charge of designing the PCB layout of electronic circuit boards and generate Gerber files for PCB fabrication.
• Responsible in research and define efficient and reliable architecture to fulfil electronic circuit board requirements for the company drone systems.
• In charge of firmware programming in embedded C/C++ language.
• In charge of testing PCB assemblies thoroughly and ensure they operate as expected.
• Responsible in sourcing suitable electronic components to implement the design architecture.
• In charge of studying datasheets of the electronic components and design the schematic of electronic circuit boards that can fulfil the requirements.
• Responsible in generateing documents and drawings of design and test.

Job Requirement:

• Minimum Degree in Mechanical/ Electrical/ Aerospace/ Mechatronics Engineering or relevant
• Minimum 3 years of working experience in electronic hardware and firmware design
• Experience in analog and digital circuit design with experience in designing electronic circuits with microcontrollers, digital signal processors (DSP), field programmable gate arrays (FPGAs), etc
• Proficient in schematic and PCB design tools such as Altium Designer, OrCAD Capture and PCB Designer, Autodesk EAGLE, etc and using instruments such as multimeters, oscilloscopes, logic analysers, etc. to troubleshoot issues on electronic circuit boards.
• Proficient in C/C++ programming language.
• Knowledge in various communication buses and protocols such as UART, I2C, SPI, CAN, Ethernet, etc.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Responsibilities

• To assist Project Manager on the day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractor.
• Liaising with authorities, client's representatives, sub-contractors and consultants.
• Checking and ensuring all plans and work are as per specifications.
• Attending site walks, inspections, meetings and preparing of monthly reports and submissions.
• Coordinate and liaise with relevant parties to ensure smooth project implementation.
• To carry out all site works issues and ad-hoc duties when instructed.

Requirements

• Candidate must possess at least a Diploma/Bachelor’s Degree in Civil Engineering or its equivalent
• At least 2 years of working experience in the related field.
• Good communication, self-initiative and interpersonal skills..

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in Supplier Quality/ Audit
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Job Description:

• Responsible for creating manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• In Charge of developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for creating CNC code/program for machining as well as designing toolings, fixtures and gauges.
• In charge of creating special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding etc.
• Responsible for conducting pre-production pilot run and training for associates.
• Provide technical support to Production to achieve technical and quality requirements.
• Responsible in liaising with OEM on product requirements, process qualifications and technology development.
• Support continuous improvement projects and Request for Quote (RFQ) proposal development and process

Requirement

• Min Degree in Mechanical/Manufacturing/Aeronautical/Material Engineering
• Min 3 years’ experience in precision engineering in Manufacturing Environment with competent with CAD software;
• Experience in special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding will be advantage

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.

EA License No: 17C8900

Job Description:

• In charge of Implementing and maintaining the Quality Management System standards and Environment, Health and Safety SOPs and Manuals.
• Responsible in ensuring adherence to Compliance and Regulatory Oversight for Standard Operating Procedure, Quality and Safety Manuals, Maintenance Organisation Expositions.
• In charge of Certification Audits by Civil Aviation and liaising with assigned CAA Principal Maintenance Inspector for approvals, certifications and inspections.
• Responsible in conducting Internal Quality Audit, External vendor QMS audits as well as managing vendor qualification into the Approved Vendor List
• Take charge of assigned audit conducted by Customer.
• In-Charge of the Quality and Safety of assigned workshop
• Responsible for conducting investigations for incidents and accidents, warranty
• Responsible assisting the Manager in developing, reviewing, improving and implementing quality and safety management procedures
• Attend meetings and other duties as delegated by the Quality Manager

Requirements:

• Min Diploma in aerospace engineering/engineering
• Min 3 years of in QMS in Aerospace Industry.
• Qualified Auditor is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

The QA/QC Engineer is responsible for ensuring that all construction andstructural works are carried out in accordance with project specifications,approved drawings, quality standards, and regulatory requirements. The roleinvolves implementing quality control procedures, conducting inspections,managing documentation, and ensuring compliance with company Quality ManagementSystems (QMS).

1. Develop, implement, and maintain Quality Assurance (QA) and

Quality Control (QC) procedures for construction projects.

2. Ensure all construction activities comply with project specifications,

approved drawings, contract requirements, and applicable standards. 3.Prepare and manage Inspection and Test Plans (ITP), Method

Statements, Quality Plans, and related QA/QC documentation.

4. Conduct regular site inspections and quality audits to verify

workmanship and material compliance.

5. Coordinate inspections with clients, consultants, main contractors,

and relevant authorities.

6. Monitor and verify incoming materials to ensure compliance with

approved specifications and standards.

7. Prepare, submit, and maintain quality records, inspection reports,

test reports, checklists, and NCR (Non-Conformance Reports).

8. Investigate quality issues, identify root causes, and recommend

corrective and preventive actions.

9. Follow up on rectification works and verify closure of quality-related

issues.
10. Coordinate with project teams, site supervisors, engineers, and

subcontractors to ensure quality requirements are met.

11. Monitor subcontractors' performance and ensure compliance with

quality standards and project requirements.

12. Attend project meetings and provide updates on quality matters.

13. Support project handover activities and preparation of quality

dossiers and as-built documentation.

14. Perform other duties assigned by the Project Manager or QA/QC

Manager.