Total 14,216 job vacancies in Singapore

About the role:

The Process Engineer II is to Support/lead troubleshooting of manufacturing operations Upstream process/product issues. Technical subject matter expert (SME) for manufacturing operations to resolve process issues, perform root cause analysis and impact assessment for process investigations. Support evaluation of technologies, plan and execute process improvements. Support and execute global manufacturing science initiatives. Plan, support and execute site manufacturing science activities such as continuous process verification (CPV) program, technology transfer of new products and process monitoring and trending.

Responsibilities:

• Support site manufacturing upstream activities through

• Planning and executing activities required for process investigation such as performing process impact assessment, participating and performing root cause analysis. Work with cross functional teams for process issues investigation

• Analyzing process trends, monitoring process performance as part of the CPV program. Escalate and perform investigation in event of any out of trend or process issues

• Leading process investigations to identify root cause and implement action plans to correct or prevent re-occurrence

• Planning and executing process improvements and robustness projects

• Leading/supporting cycle development for process parameters where applicable

• Drafting process training slides and providing process training to cross functional teams

• Raising change controls as change owners for process changes

• Performing impact assessments for relevant change controls

• Providing technical /process parameters for creation and revision of master batch records. Review master batch records.

• Lead/Support technology transfer for new technologies/product introduction through

• Leading/Supporting the evaluation of new manufacturing technologies and/or equipment for process improvement or process capabilities build.

• Planning and executing technical transfer activities according to project timelines. Raise change controls where applicable to support the technical transfer.

• Monitoring process performance and trending through the site CPV program. Proactively investigate where required to ensure process robustness.

Performing risk assessment, drafting required technical transfer and process control strategy documents and updating lifecycle documents.

Authoring study and process validation protocols and reports where needed.

• Support audits, regulatory submissions and responses.

• Support and execute global manufacturing sciences initiatives according to project timelines.

• Responsibility to adhere to any applicable EHS requirements.

• Commitment to a fair and respectful relationship to others and behavior in accordance with Takeda’s Code of Conduct.

• Any other duties as assigned by supervisor.

What you bring to Takeda:

Education and Experience Requirements

• Bachelor’s Degree in Biochemistry, Chemistry, Chemical Engineering, Biotechnology, Biochemical Engineering with minimum 3 - 4 years of relevant experience or Master’s Degree with 2 years of relevant work experience or a fresh PhD in the relevant technical area.

• Hands-on experience with cell culture/ upstream processes and/or downstream processes in a manufacturing or development environment.

• Has knowledge of cGMPs.

Key Skills and Competencies

• Strong technical knowledge and proficiency in process understanding and application in biopharmaceutical processes

• Strong analytical skills including demonstration of systematic evaluation of potential issues, correlation or cause and effect relationships, root cause analysis methodology

• Good communication skills

• Willingness to learn

• Team worker/ able to work in matrix environment

• Independent worker/ Self starter.

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

• Perform process setup and buyoff for both Drive Backend Assembly, ensuring that yield, cycle time, and quality outcomes meet defined targets
• Support product ID label buyoff to ensure compliance with product specifications and standards• Monitor production yield to detect any excursions, conduct process mapping, and implement immediate containment (stop bleeding)
• Establish hypotheses, design experiments to identify root causes, propose corrective actions, and report findings to engineers
• Escalate process and technical issues appropriately per PMP requirements
• Conduct basic data queries and analysis to provide relevant information and insights for engineering teams
• Ensure process sustainability by monitoring KPIVs/KPOVs and managing Fast Triggering systems to maintain stable and controlled operations
• Lead or participate in continuous improvement projects aimed at enhancing production efficiency in a consistent and sustainable manner
• Perform additional tasks and responsibilities as assigned to support team, department, and company Objectives and Key Results (OKRs)

Requirements:

• Diploma in Engineering and related disciplines
• Strong data querying and analytical capabilities
• Proficient in English with strong verbal and written communication skills
• Able to perform effectively under pressure and meet deadlines
• Demonstrates strong resilience, adaptability, and positive work attitude

To submit your application, please apply online to apply@rn-care.com or call +65 6514 9838 for a private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Job Responsibilities:

- Provide engineering support to manufacturing equipment and processes

- Carry out Preventative Maintenance of production equipment

- Troubleshoot and repair faulty production equipment

- Improve and upgrading of Production equipment hardware and control (software)

- Identify and rectify process problems for quality improvement/scrap reduction

- Updated and control of equipment spare parts

- Installation and qualification of new processes and equipment

- Support new program/model start-up

- Minimizing machine downtime, scrap raw materials/products

- Maintaining correct spare parts inventory and product quality

- Communicating with production operators/supervisors and other support groups

- Having a high level of expertise and practical knowledge in various molding processes

Job Requirement :

- Diploma in Engineering or equivalent

- 2 years of relevant working experience

- Proficient with PLC Programming

- Able to perform shift work and OT

- Able to start work immediate or short notice

Job title: Lithography Process Engineer

1. Process Development and Optimization

• Operate, and optimize photolithography equipment, including Canon i-Line Stepper / Canon DUV stepper / Canon Scanner systems.
• Hands-on DNS track experience to support lithography process setup, development, optimization, and tool performance improvement activities.
• Define, develop, and tune process recipes, including focus, exposure dose, alignment, overlay, and other critical lithography parameters.
• Support BCD technology development through process characterization, window expansion, and optimization activities.
• Conduct process experiments, collect and analyze data, and implement improvements to enhance process robustness and performance.
• Collaborate with R&D, manufacturing, and equipment teams to introduce and qualify new processes or process changes.

2. Process Monitoring and Control

• Monitor lithography process performance to ensure consistent output, high yield, and stable operation.
• Use DNS track knowledge to support process monitoring, track troubleshooting, and day-to-day manufacturing stability.
• Perform routine process qualifications, tool matching, SPC monitoring, and defect analysis.
• Troubleshoot process excursions, identify root causes, and implement effective corrective and preventive actions.
• Work closely with equipment engineers to ensure tool readiness, uptime, and process stability.

3. Data Analysis and Problem Solving

• Analyze process, metrology, and defect data to identify trends, risks, and improvement opportunities.
• Lead or support root-cause analysis for process-related issues and yield loss.
• Use data-driven methods to improve process stability, throughput, and overall manufacturing performance.
• Provide technical recommendations based on experimental results and production data.

4. Documentation and Reporting

• Maintain accurate records of process parameters, experiments, qualifications, and results.
• Prepare technical reports, summaries, and presentations for engineering reviews and management updates.
• Update process specifications, operating procedures, and control plans as required.
• Ensure proper documentation of process changes and lessons learned.

5. Cross-Functional Collaboration

• Work closely with cross-functional teams including R&D, production, quality, equipment, and integration.
• Support shift engineers and technicians as needed to resolve process or tool-related issues.
• Participate in technical discussions, problem-solving meetings, and improvement initiatives.
• Contribute to smooth process integration and technology transfer activities.

6. Continuous Improvement

• Identify and lead continuous improvement initiatives to improve yield, efficiency, quality, and cycle time.
• Explore opportunities for process automation and smarter process control.
• Support lean manufacturing and operational excellence initiatives in the lithography area.
• Drive standardization and best practice sharing across tools and teams.

Required Qualifications

• Bachelor’s degree or higher in Materials Science, Chemical Engineering, Electrical Engineering, Physics, Microelectronics, or a related field.
• Experience in Semiconductor Lithography Process Engineering.
• Knowledge of BCD process technology.
• Hands-on experience with Canon i-Line Stepper or Canon DUV stepper or Canon Scanner 
• Understanding of lithography fundamentals, process windows, alignment, overlay, exposure control, and defect mechanisms.
• Experience in process monitoring, SPC, troubleshooting, and root-cause analysis.
• Ability to work independently and collaboratively in a fast-paced manufacturing environment.
• Experience supporting tool qualification, process transfer, or technology ramp-up.
• Exposure to inline process integration and yield improvement projects.
• Good communication, documentation, and presentation skills.
•  Basic DNS track hands-on experience

• Well Established Company
• Basic $4000 - $4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• Degree in Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

A Process Specialist leads production teams and manages manufacturing processes by setting up, operating and maintaining machinery and equipment to ensure efficient, safe and high-quality production output.

Responsibilities:

• Lead teams of production operators to achieve daily production targets and maintain product quality
• Set up and adjust machine parameters to optimize production efficiency and product standards
• Operate and maintain production equipment to ensure continuous and safe manufacturing processes
• Follow production schedules and monitor output to meet planned targets
• Conduct regular quality checks to ensure all products meet quality standards
• Troubleshoot equipment issues and collaborate with maintenance teams to resolve malfunctions promptly
• Maintain accurate production records for raw materials, packaging and finished products
• Ensure the production environment is clean and complies with safety procedures
• Apply and adhere to operating procedures and standards consistently

Required competencies and certifications

• Food Safety and Hygiene-1 certification

Preferred competencies and qualifications

• Nitec/Higher Nitec in Food Science/Technology or equivalent
• Ability to understand and converse in English
• Experience or knowledge in food production
• Basic knowledge of control systems and operation of PLC
• Basic understanding of food processing technology
• Experience with integrated manufacturing excellence, Total Productive Maintenance (TPM), or similar operating systems
• Willingness to work on rotating shifts (day and night)

⏰ Shift Timing

☀️ 9AM – 9PM

Key Responsibilities

• Serves as liaison between the customer and the Business Unit for assigned projects, ensuring clear understanding of customer issues and delivery of applicable solutions.
• When necessary, works closely with customer to optimize tool performance to meet customer process and integration requirements.
• Checks and approves operational quality of system equipment. Instructs customers in the operation and maintenance of the system.
• Provides highly visible customer support through the performance of on-site installation, as well as overseeing any necessary diagnoses, troubleshooting, service, and repair of complex equipment and systems.
• Knowledge of 3 or more processes on 1 or more technologies

Requirements

• PhD/ Master/ Bachelor in Engineering studies
• Resourceful and proactive mindset. Ability to diagnose and resolve complex technical issues efficiently.
• Excellent verbal and written communication skills to interact with customers and colleagues
• Ability to provide excellent customer service and build rapport with clients
• Technical experiences in Applied Materials' equipment will be highly preferred

Work Location

• North/ East (Depending on customer's site)

JOB SUMMARY:

Assistant Process Engineer with process engineering experience to join VTFS Engineering team. The candidate in this position will assist with process engineers which enables the features of future generations of products. They apply manufacturing, engineering, and technological principles to the development of new equipment, procedures, and processes.

MAIN DUTIES AND RESPONSIBILTIES
1.   Assist the engineer with process development

2.   Assist the engineer with new product development

3.   Assist the engineer with cost calculation and cost down

4.   Assist the engineer with project management

5.  Communication with customers and suppliers

6. Deal with SAP and NCC system

COMPETENCIES/ JOB SPECIFICATIONS
1.   Investigation, equipment, process and material development for new concepts and advanced technology

2.   Able to understand productivity and industrial knowledge

3.   Knowledge on ISO Standards

4.   Demands broad technical strengths, together with excellent communication and organizational skills

5. Work ability of materials (Metals, alloys, ceramics, etc)

MINIMUM QUALIFICATION AND WORK EXPERIENCEREQUIRED
1.   Candidate must possess at least bachelor’s degree/Polytechnic Diploma/Professional Degree in Chemistry/Materials Engineering or equivalent

2.   Fresh graduates are welcomed

3.   Understand SAP and NCC system (BOM, Part number, Process flow)

4. Proficiency in Excel

Responsibilities

• Verify and analyze hold lot rejects whether valid, invalid and escalate if in doubt or not meeting internal requirements
• Ensure smooth release of hold lots to meet shipment through verification, analysis and disposition
• Pre-alert, trigger and feedback hold lot or issues to upstream process for containments and/or action improvements
• Provide hold lot or low yield reports to engineering team for tracking, monitoring, continuous improvements and/or escalation
• Coordinate and follow up with cross functional team on incoming and Backend lot disposition to ensure shipment deliverables

Requirements

• Higher Nitec or Nitec in any Engineering field
• Minimum 3 years working experience preferred

Roles and Responsibilities:

•  Ensure timely submission of process deliverables, including PFDs, P&IDs, hydraulic profiles, equipment sizing, HAZOP study reports, etc

•  Lead in the P&ID (Piping and Instrumentation Diagrams) drawings submissions utilizing Bentley OPPID, PFD (Process Flow Diagrams), and mass balance calculations

•  Lead in RO Membrane design selection and process.

·   Participate and coordinate in HAZOP (Hazard and Operability) studies for the overall plant and its systems/sub-systems.

•  Integrate equipment and material capabilities to meet process module and technology specifications.

•  Taking the lead in discussion with clients on planning and execution of the testing and commissioning for successful project completion.

•   Analyze and review current processes to streamline them for improvement, productivity enhancement, sequence optimization, unit improvement, and troubleshooting of the plant during testing and commissioning.

•   Attend technical meetings with clients, vendors, sub-contractors, and internal project teams.

•  Collaborate with various disciplines engineers to ensure all interfacing issues are aligned and resolved to mitigate engineering rework.

·   Any other ad-hoc engineering duties to support the Project Manager for successful execution of the project.

• Well Established Medical Devices Manufacturing Company

• 1-Year Contract (Renewable / Potential Conversion to Permanent)

• Basic $8000 to $9300 + Completion Bonus

• Working location: Boon Lay

• Working day: Monday to Friday

• Working hours: 8.30am to 5.30pm

  
  

Job Responsibilities:

ERP System Implementation

• Coordinate and support the implementation of Microsoft Dynamics 365 Business Central (ERP).

• Work closely with business users, project teams, and external ERP vendors throughout the project lifecycle.

• Gather and document business requirements from various departments.

• Coordinate system testing, user acceptance testing (UAT), training, and go-live activities.

• Monitor project progress, timelines, risks, and deliverables.
  

Process Improvement

• Review existing operational and manufacturing processes to identify areas for improvement.

• Support inventory management and inventory costing enhancement initiatives.

• Drive continuous improvement projects to improve efficiency, productivity, and process effectiveness.

• Recommend and implement practical solutions to operational challenges.
  

Project Coordination & Stakeholder Management

• Coordinate project activities across Manufacturing, Operations, Supply Chain, Warehouse, Finance, and IT teams.

• Facilitate project meetings and follow up on action items.

• Communicate project updates and escalate issues when necessary.

• Ensure project milestones and objectives are achieved within agreed timelines.

  
  

Job Requirements:

• Degree or Diploma in Engineering, Manufacturing, Business, Supply Chain, Information Systems, or related disciplines.

• 3–5 years of project management, process improvement, or ERP project experience.

• Experience participating in or supporting ERP implementation projects is required.

• Exposure to Microsoft Dynamics 365 Business Central, Dynamics NAV, SAP, Oracle, NetSuite, or similar ERP systems is preferred.

• Manufacturing industry experience is essential.

• Experience in inventory management, production planning, warehouse operations, or inventory costing will be advantageous.

• Knowledge of Lean Manufacturing, Lean Six Sigma, or Continuous Improvement methodologies is preferred.
  

  
  

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities

• Current and Expected salary

• Reason for leaving

• Date of availability

• Education background

  
  

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Industry/ Organization Type: Waste Management
• Position Title: Process Engineer
• Working Location: Tuas (Company transport provided)
• Working Hours: 5 days (Mon - Fri, 8.00am - 5.00pm)
• Salary Package: Basic salary up to $4,300 + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Analyze and evaluate current processes, take measurements, and interpret data, including SCADA system operations
• Conduct risk assessments to ensure safe operations
• Research, design, and develop processes to improve productivity and workflow
• Oversee day-to-day operations and maintenance of facility processes
• Organize and set up efficient operations
• Manage the implementation of new processes and procedures
• Troubleshoot and resolve issues related to processes, procedures, and operations
• Develop best practices, routines, and innovative solutions to improve output and quality
• Manage process costs and timelines
• Prepare process documentation and operating instructions
• Participate in Process Safety Management (PSM) and Hazard and Operability (Hazop) studies
• Plan and execute plant shutdowns as a turn-key manager

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering
• At least 2 years of experience in the process industry
• Good knowledge of process standards, process improvement, and safety management
• Team-oriented and adaptable

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #75664 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Process Engineer
• Working Location: North
• Working Hours: 9am – 6pm
• Salary Package: Basic up to $4,500 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Create CAD drawings and NC programs using Turret / Laser machine software.
• Develop drawings based on customers’ drawings, including complex parts and structures.
• Provide engineering support for production processes and assembly work.
• Design sheet metal products according to customer requirements.
• Lead project planning and determine project steps for New Product Introduction (NPI).
• Monitor, follow up, and review project progress regularly.
• Design tooling solutions to reduce production costs, improve product quality, and enhance process efficiency.
• Prepare and maintain work instructions, process documents, and procedures.
• Create detailed drawings and bill of materials for equipment and sub-assemblies.
• Liaise with engineers and technicians on assembly, testing, and technical matters.
• Travel locally or overseas when required to support engineering projects.

APPLY NOW!!!

• Diploma / Degree in Mechanical Engineering or related field.
• Minimum 3–4 years of relevant working experience.
• Experience in sheet metal manufacturing is an advantage.
• Proficient in SolidWorks, AutoCAD, ProE, or related CAD software.
• Able to read technical drawings and understand welding symbols, surface finishes, and tolerance.
• Candidates with no relevant experience are encouraged to apply, training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #10051 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

We are seeking a highly skilled Senior Process Integration Engineer to lead the development and optimization of Indium Phosphide (InP) based Edge Emitting Lasers (EELs). In this role, you will be the bridge between design and manufacturing, ensuring that our high-performance optoelectronic devices transition from concept to high-volume production with world-class reliability and yield.

You’ll be working at the frontier of photonics, handling complex material systems and sophisticated fabrication sequences to power the next generation of optical communications and sensing technologies.

Core Responsibilities

• Process Flow Ownership: Design, implement, and manage the full end-to-end fabrication flow for InP-based EELs (e.g., Fabry-Pérot, DFB, and DBR lasers).
• Yield & Performance Optimization: Identify and resolve integration bottlenecks. Use Statistical Process Control (SPC) and Design of Experiments (DOE) to improve device electro-optical performance (threshold current, wall-plug efficiency, and slope efficiency).
• Cross-Functional Collaboration: Partner with Epitaxy (MOCVD) teams to optimize regrowth interfaces and with the Design team to ensure Layout-to-Mask integrity.
• Advanced Fabrication Management: Oversee critical steps including dry/wet etching (ICP/RIE), dielectric deposition (PECVD/ALD), metallization etc.
• Failure Analysis: Coordinate Root Cause Analysis (RCA) on fabrication failures using SEM, TEM, and FIB diagnostics to drive continuous improvement.

Key Technical Requirements

• Materials Expertise: Deep understanding of III-V compound semiconductors, specifically the GaAs/InP/InGaAsP/material systems.
• Device Physics: Strong grasp of semiconductor laser physics
• Fabrication Proficiency: Hands-on experience or good understanding on photolithography, etching, thin film
• Characterization:  Understanding laser characterization data and correlating results back to specific process modules.

Qualifications

• Education: PhD or Master’s degree in Electrical Engineering, Physics, Materials Science, or a related field.
• Experience: 5+ years of direct experience in III-V semiconductor processing
• Software: Proficiency in JMP, or Python for data analysis;
• Mindset: A methodical troubleshooter who thrives in a cleanroom environment and enjoys the "detective work" of process integration.

Job Scope

• Design, develop, and execute research projects in membrane science and technology for sustainable and low-carbon separations.
• Develop advanced polymeric membranes, thin-film composite membranes, mixed-matrix membranes, and molecular-sieving membranes by incorporating sustainable polymers, functional nanomaterials, porous fillers, and advanced crosslinking/interfacial engineering strategies.
• Optimize membrane microstructure, free volume, interfacial compatibility, and transport pathways to achieve high permeability, selectivity, and long-term stability under complex operating conditions.
• Conduct membrane fabrication, modification, and performance evaluation for applications such as CO2 capture, H2 purification, vapor/VOC separation, organic solvent separation, resource recovery, and industrial fluid purification.
• Utilize and troubleshoot advanced characterization techniques, including SEM, TEM, AFM, FTIR, XPS, TGA, DSC, DMA, rheology, gas sorption, and permeation measurements, for membrane structure-property analysis.
• Interpret experimental results, compile technical reports, and present research outcomes at project meetings and international conferences.
• Lead the preparation of high-impact manuscripts for top-tier peer-reviewed journals and actively contribute to patent applications and technology translation.
• Conduct comprehensive literature reviews and propose innovative approaches for developing stable, recyclable, scalable, and high-performance membrane materials.
• Assist in mentoring junior researchers, students, and interns, and contribute to collaborative projects with academic and industrial partners.

JobRequirement

• PhD in Chemical Engineering, Materials Science and Engineering, Polymer Science, Chemistry, Environmental Engineering, or a related discipline.
• Strong research background in membrane science and technology, polymer materials, functional materials, or selective separations.
• Prior experience in polymer membranes, thin-film composite membranes, mixed-matrix membranes, molecular-sieving membranes, gas/vapor separation, organic solvent nanofiltration, or membrane transport studies is highly preferred.
• Experience in CO₂ capture, H₂ purification, hydrocarbon separation, vapor/VOC separation, low-carbon separation processes, or membrane stability under humid/complex industrial streams would be an advantage.
• Proficiency in membrane fabrication, membrane characterization, and separation performance evaluation.
• Familiarity with characterization techniques such as SEM, TEM, AFM, FTIR, XPS, TGA, DSC, DMA, rheology, gas sorption, and membrane permeation testing.
• Track record of publishing high-quality papers in membrane science, polymer materials, chemical engineering, or related fields. Experience in patent applications or technology commercialization is an advantage.
• Proven ability to conduct independent research, manage research projects, analyze complex data, and solve technical problems.
• Good scientific writing, communication, and presentation skills.
• Ability to collaborate effectively in multidisciplinary teams and contribute to the supervision of junior researchers.

About STMicroelectronics

At ST, we are 48,000 creators and makers of semiconductor technologies mastering the semiconductor supply chain with state-of-the-art manufacturing facilities. An integrated device manufacturer, we work with more than 200,000 customers and thousands of partners to design and build products,solutions, and ecosystems that address their challenges and opportunities, and the need to support a more sustainable world. Our technologies enable smarter mobility, more efficient power and energy management, and the wide-scale deployment of cloud-connected autonomous things. We are on track to be carbon neutral in all direct and indirect emissions (scopes 1 and 2), product transportation, business travel, and employee commuting emissions (our scope 3focus), and to achieve our 100% renewable electricity sourcing goal by the end of 2027.

Further information can be found at www.st.com

YOUR ROLE 

1. Set-up process recipe of newly setup process equipment.
2. Perform qualification for new process equipment and new process recipe.
3. Evaluate the new processes and make a series of process characterization.
4. Perform inline troubleshooting and qualification in daily operation.
5. Follow Gemba activity to identify opportunity of improvement in operation and quality aspects.

YOUR SKILLS & EXPERIENCES

• Degree in engineering of materials, chemistry
• Knowledge of excel, office suite.
• English language proficiency
• at least 5 years experience in wafer fab process engineering, and having at least 3 years experience in DCVD process; preferred experienced in DCVD process tool type in Applied materials Centura and Producer.
• Strong CVD process technical knowledge background, with experience to develop and optimize new process recipe
• Master SPC, FMEA and 8D problem solving methodology.

As a Senior/Staff LithographyProcess Engineer, you will lead the development and optimization of lithographyprocesses for both Fan-In and Fan-Out eWLB (Embedded Wafer Level Ball GridArray) packaging technologies. You will be responsible for driving keyengineering projects such as yield improvement, cost reduction, and processtransfers across global manufacturing sites.

Key Responsibilities:

• Own and optimize lithography processes for PI, PR, and other patterning layers in both FO and FI eWLB.
• Manage photolithography tools (GHI/i-line stepper, coat/develop tracks, etc.), including recipe setup and troubleshooting.
• Lead cross-functional projects focused on cost reduction, process robustness, and NPI transfer.
• Lead process improvements to enhance yield, throughput, and cost efficiency.
• Evaluate and implement new lithography materials (PSPI, PR) and tools.
• Define and maintain process documentation (SOP, OCAP, FMEA, SPC) and training programs.
• Collaborate with equipment vendors, materials suppliers, and internal engineering teams to evaluate and qualify new tools or materials.
• Design and perform DOE, root cause analysis, and statistical data analysis (e.g., JMP, Camline, etc.).
• Support daily fab operations with issue resolution and yield improvement initiatives.
• Mentor junior engineers and provide technical direction to the litho team.
•  

Qualifications:

• Bachelor’s or Master’s degree in Engineering (Materials, Chemical, EE, or related field).
• 5+ years hands-on experience in photolithography process, preferably in advanced packaging (eWLB, WLP, FO-PLP).
• Strong knowledge of lithography tooling, including exposure systems and coater/developer tracks.
• Skilled in project management, process transfer, and cost/yield improvement.
• Familiar with SPC, FMEA, and problem-solving methodologies.
• Excellent communication skills, with proven ability to engage with both internal stakeholders and external customers.
• Fluent in both English and Chinese. (This role will need to liaise with customers and counterpart from China)

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Micron’s Singapore Process Development (PD) group in Technology Development (TD) is looking for Plasma-CVD / Diffusion PD engineer to support Plasma-CVD/DIFF process development of advanced technology nodes. You will design and optimize Plasma-CVD or Diffusion for Micron’s innovative NAND Flash products.

As a PD Engineer, you will take ideas from conception through process development then implementation in our manufacturing facilities. In addition to your technical responsibilities, you will also run the projects of highly technical nature. This role is essential to the success of Micron’s products and may require business-related travel. Primary areas of responsibility include Plasma-CVD or Thermal Diffusion process and film characterization, optimization, design, troubleshooting, process transfer and fundamental research.

Advanced Thin Films PD Engineer will interact with groups such as Process Integration, Metrology, Surface characterization labs, Electrical Failure Analysis, Yield Enhancement, Manufacturing and Equipment vendors/suppliers, to ensure robust thin film processes that meet the precise physical and electrical requirements for Micron Products.

As an Advanced Thin Films PD Engineer at Micron, you will be required to travel for brief business purposes. This position requires that you have an aptitude for a research and development (R&D) environment, good organizational skills and ability to work independently as well as in a team environment. This position may often require weekend support to R&D Pilot Line, for example, in case of pilot/manufacturing line excursions/downs and monitoring program-critical lots thought various modules as deemed necessary.

Your responsibilities will include, but are not limited to:

• Process Development

• Design and develop and deliver process package to meet product specification requirements as per program targets and timelines

• Characterize the processes using appropriate techniques (SEM, TEM, XPS, SIMS, AFM, etc.)

• Design and execute experiments, analyze data and present it in the appropriate forums.

• R&D Pilot Line in the Fab

• Improve process maturity, capability and sustain processes in the fab under your ownership

• Updating the Fab engineers on customer issues and technology needs.

• Supporting root cause defect and unique fail mode analysis.

• Process Integration

• Delivering advanced technology to meet future product nodes.

• Developing recipes to meet structural & electrical requirements.

• Managing wafers though Thin Film levels in support of special requirements.

• Other Process Areas

• Working in cross-functional teams to jointly develop Array and CMOS structures.

• Supporting cross-functional failure analysis and yield improvement.

• Advanced Thin Film peers

• Maintaining or developing expertise in multiple process, hardware, or technology areas.

• Serving as a resource for peers in recipe & process development.

Successful candidates must have:

• Education requirements

• PhD in Physics, Materials Science, Chemical Engineering, Electrical Engineering, Chemistry, or related fields

• BS/MS+5 years equivalent industry or research experience may substitute for a PhD.

• Understanding in one or more of the following topics Transport phenomena, Electromagnetics, Atomic/Molecular physics, and Surface phenomena.

• Solid troubleshooting, experimental design and data analysis skills.

• Strong computer skills, including MS Office.

• Plasma physics background and understanding of plasma sources used in plasma CVD is highly preferred.

• Understanding of CVD and Diffusion deposition processing principles.

• Rudimentary understanding of process control and Statistical Process Control (SPC).

• An understanding of solid state devices.

• An understanding of semiconductor process.

• Knowledge of advanced data analysis techniques and scripting is highly preferred

• Open to work off shift and weekends if necessary

• Open to domestic and international travel

Step into a career with ASM, where cutting edge technology meets collaborative culture. ​

For over 55 years ASM has been ahead of what’s next, at the forefront of innovation and what’s technologically possible. With more than 4,500 ASMers representing 70 nationalities, our people and our advanced semiconductor devices are playing a crucial role in trends such as 5G, cloud computing, AI, and autonomous driving.  But we’re more than just a tech company. We value diversity, inclusion and sustainability as we strive to make a positive impact on the world.  Our development programs help support your growth, shaping your future and pushing the boundaries of innovation to unleash potential.  

Job's mission

As Global Manufacturing Process Lead, you will define and standardize ASM’s end-to-end manufacturing processes and MES capabilities to enable scalable, high-performance operations. You will translate business needs into robust digital solutions that improve safety, quality, throughput, and traceability while enabling real-time, data-driven decision making on the shop floor. 

Working across Manufacturing, Quality, EHS, Supply Chain, Finance, and IT, you will align stakeholders on process standards, metrics, and system requirements, and lead the design and deployment of MES solutions that deliver measurable operational and financial outcomes. 

What you will be working on

• Lead cross site process mapping to simplify, standardize, and document equipment manufacturing workflows and translate business requirements into scalable MES tool capabilities. 
• Own the global MES process standard and business capability roadmap from process definition through sustainment across manufacturing sites. 
• Define business requirements for MES design, configuration, integration, testing, and deployment in partnership with IT, vendors, and site teams. 
• Establish and govern MES master data, transaction rules, process controls, measurements, and traceability requirements to support safety, quality, delivery, cost, and productivity outcomes. 
• Partner with Planning and Logistics teams to improve demand to build signal flow, production readiness, and manufacturing visibility through MES enabled processes. 
• Ensure MES capabilities align with enterprise process standards, platform strategy, and end to end business process design. 
• Work with global process owners and IT to continuously enhance MES functionality, improve user adoption, and support ongoing platform maturity. 
• Ensure MES processes and controls comply with corporate policies, trade regulations, and audit requirements. 
• Provide business insights and recommendations to leadership on process performance, standardization opportunities, and MES capability improvements. 

What we are looking for

• Minimum Bachelor’s degree in Engineering, or a related field; semiconductor industry experience, or equivalent complex high-tech manufacturing experience
• Minimum 5 years of experience leading business process improvement, digital transformation, or operational excellence initiatives in a manufacturing or corporate environment. 
• Strong analytical skills with the ability to interpret complex data, identify trends, and drive measurable improvements in quality, cost, and efficiency. 
• Comfortable in a fast-paced and dynamic environment; able to manage multiple priorities while maintaining strong attention to detail. 

What sets you apart

• Excellent stakeholder management and communication skills, with the ability to influence at all levels, including senior leadership. 
• Results-driven mindset with a passion for continuous improvement and delivering high-quality outcomes. 
• Proven program/project management capability, with a track record of leading cross-functional teams and delivering complex initiatives on time and within budget. 
• Working knowledge of process-improvement and problem-solving methodologies (e.g., Lean, Six Sigma); certification 

Apply today to be part of what’s next.

We make the tech that enables the chips in devices which improve lives around the world. We do this with an eye to the future, pushing the boundaries of what’s possible through cutting-edge innovation, and driving the next wave of technological breakthroughs that shape how we live, work, and connect.

To learn more about ASM, find us at asm.com and on LinkedIn, Facebook, Instagram, X and YouTube.

ASM is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, age, nationality, social or ethnic origin, sexual orientation, gender, gender identify or expression, marital status, pregnancy, political affiliation, disability, genetic information, veteran status, or any other characteristic protected by law.

Job Description & Requirements

• Sustain backend manufacturing processes by monitoring daily test times, production yields, and key performance indicators.
• Perform data queries, statistical analysis, and physical analysis to trace and investigate the root cause of test failures and yield excursions.
• Identify equipment bottlenecks and implement process improvements (recipes, setups) to optimize the manufacturing flow.
• Develop and release test process documentation, work instructions, and Process Failure Mode and Effects Analysis (PFMEA) aligned with Seagate's quality standards.
• Utilize software, electronics, and mechanical skills to repair equipment issues and conduct preventative maintenance.

Requirements:

• Min Diploma in Mechanical, Electrical, Mechatronic Engineering, or a related field
• Min 3 years of working experience in Cleanroom Environment
• Proficiency in data analysis, basic scripting/programming (Python, SQL, C, or C++), and statistical problem-solving (e.g., 5-Why, DMAIC, Fishbone)

To submit your application, please apply online to apply@rn-care.com or call +65 6514 9838 for a private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900