Total 15,279 job vacancies in Singapore

Field Service Engineer (Semiconductor Equipment, Entry Level Welcome)

4 days, 12 hours shift

Salary: $2,800 - $3,200

Location: Woodlands

Job scopes:

• Install, troubleshoot, repair & service of semiconductor machinery.
• Carry out regular maintenance, repairing of equipment/machines and follow up on work orders, onsite-support equipment/machines installation
• Serves as company contact point with customer on technical matters

Requirements:

• Diploma/Degree in Electrical /Electronic/ Mechanical Engineering
• 1-2 years working experience in Semiconductor Industry, knowledge of electrical & mechatronics.
• Training Provided

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

Equipment Service Engineer

Working day: Monday – Friday, 830am - 5:30pm
Salary range: $3000 - $4800
Location: Woodlands Ave (Nearest Mrt: Admiralty)

This Equipment Service Engineer will be responsible for installing, testing, and maintaining automation systems, troubleshooting and repairing electrical/electronic components, configuring software, and ensuring smooth communication with customers. They will handle support requests, coordinate with internal teams, and provide accurate service reports.

Responsibilities

• Automation system installation, testing, commissioning, and maintenance.
• Setup electronics controllers, PC, and install software.
• Perform onsite machine buy-off as per agreed customer requirements
• Analyze equipment failures and identify root causes to effectively repair equipment failures.
• Able to analyze electrical/electronic circuit, read machine logfiles to identify root cause for the problem
• Able to repair electrical components, setup robot software, PC software.
• Establish a seamless interface between customers and the company.
• Demonstrate high integrity and work independently with minimal supervision.
• Spearhead customer issues and coordinate with internal departments and customer stakeholders to resolve them efficiently. Escalate to management if necessary.
• Respond to phone support and onsite support requests in accordance with SLA.
• Prepare and present accurate, detailed service reports in a timely manner.

Job Requirement:

• Diploma or Bachelor’s degree in Electronics, Computer Engineering or equivalent
• Min 3 years or more of experience in automation systems setup or service support
• Proficiency in electrical components such as servo motors and robots
• Proficiency in installing software, configuration and setting up PCs and machines
• Ability to read equipment log files and process flows to debug machine breakdowns
• Willingness to travel for overseas assignments on short notice.

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

Working days: either 4 days 12 hours rotating shift

Location: Islandwide , office at Woodlands

Salary: $2800 -$3500 depends on experience

Job scope:

• Semiconductor machines startup and installation

• Perform equipment on-site installation, diagnosing, troubleshooting, servicing, and repairing

• Perform equipment continuous improvement programmes, preventive maintenance, modifications and repairing works

• Serves as company contact point with customer on technical matters

• Attends to customers complaints and provides timely solutions

• Other ad hoc duties

Requirements:

• Nitec/ Diploma in Mechanical/ Mechatronic Engineering or related discipline

• Hands-on experience in semiconductor machine maintenance

• Able to work in cleanroom environment

  
  

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Interested applicants are invited to apply directly at the NUS Career Portal. Please note your application will only be processed if you apply via NUS Career Portal.

NUS Career Portal link: https://careers.nus.edu.sg/job/Research-Engineer-%28SHINE-Industry-Projects-and-Programme-Support%29/33489-en_GB/

We regret that only shortlisted candidates will be notified.

Job Description

SHINE Industry Projects and Programme Support
•             Coordinate SHINE consortium activities and industry project administration.
•             Support coordination among researchers, industry partners, government agencies, and internal stakeholders to facilitate SHINE activities and industry collaborations.
•             Coordinate industry project activities, including tracking project progress, deliverables, milestones, and reporting requirements.
•             Maintain project documentation, records, and administrative materials to support project execution and compliance requirements.
•             Support technical workshops, industry engagements, consortium activities, and collaborative initiatives involving SHINE researchers and industry partners.
•             Organise workshops, seminars, technical talks, industry visits, and stakeholder engagement activities.
•             Support development of postgraduate programme operations and related programme initiatives.
•             Liaise with researchers, industry partners, government agencies, students, and internal stakeholders to support programme objectives.
•             Provide administrative and operational support for SHINE initiatives and other ad-hoc programme activities as assigned.

Qualifications

•            Possess a Bachelor's degree in a STEM discipline (Science, Technology, Engineering or Mathematics), preferably in Electrical Engineering, Computer Engineering, Materials Science, Physics, Mechanical Engineering, or a related field.
•             Relevant experience in project coordination, industry collaborations, stakeholder engagement, programme administration, research administration, or related functions would be advantageous.
•             Experience coordinating projects, workshops, industry engagements, postgraduate programmes, internships, or multi-stakeholder initiatives would be advantageous.
•             Ability to engage effectively with researchers, students, industry partners, government agencies, and other stakeholders.
•             Strong interpersonal, communication, stakeholder management, and organisational skills.
•             Ability to manage multiple priorities and work effectively in a dynamic environment.
•             Experience in a university, research institute, government agency, corporate laboratory, or technology-related environment would be advantageous.
•             Familiarity with semiconductor technologies, advanced packaging, microelectronics, photonics, or related technology domains would be advantageous.
•             Self-motivated, resourceful, and able to work independently as well as collaboratively within a team.
•             Open to appointment on a fixed-term contract.

1.     Be the subject matter expert of MEDs microelectronic assembly team and advise Design Engineering early in new product development to ensure designs are manufacturable.

2.    Operate and supervise, including setup, die attachment and wirebonding equipment for all microelectronics assembly processes.

3.    Responsible to develop, design, and test standards and guidelines for developing microelectronics packaging solutions for MEDs customer products in aerospace and defense applications.

4.     Responsible to define, develop and qualify new packages such as leadframe/substrate layout, bonding diagram, package outline drawing.

5.     Develop assembly processes and establish process documentation that are stable, repeatable, and reliably meet design requirements.

6.     Take a leading role in the build of prototypes, first articles, and pre-production assemblies.

7.    Support customer products throughout their life cycle, developing and implementing changes as needed.

8.     Consistently complete quality work in a timely manner meeting established deadlines.

9.     Work with hybrid technology including RF ICs, capacitors, inductors, substrates, and other micro components.

10.  Analyse and work to both prototype and released assembly drawings and process documents.

11.  To ensure products manufactured in accordance with MEDs quality standards.

12. Train new personnel on all microelectronics assembly processes as required.

• Basic $3,000 - $4,000 + ($500 - $1000) Transport Allowance + Commission
• Mon - Fri 8.00am - 5.00pm
• Location: Woodlands
• Permanent Role + AWS + VB

Responsibilities

• Identify and manage projects and sales opportunities to drive revenue growth.
• Develop and maintain new and existing customer accounts.
• Prepare and deliver technical presentations to clients.
• Understand customer needs and competitor activities to develop winning strategies.
• Work closely with sales support and application engineers.
• Provide sales and first-level technical support for inquiries and issues.
• Prepare quotations, proposals, and manage project sales reports.

Requirements

• Diploma in Mechanical Engineering or equivalent.
• 1–2 years of relevant experience preferred; Entry-level candidates welcome.

Only shortlisted candidates would be notified

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R22111807 | Yap Teng Hui

• Salary: $3000 - $4000
• Working Hour: Mon - Fri, 8.30am - 6.00pm
• Location: Ubi
• Permanent Role + AWS + Variable Bonus

Responsibilities:

• Handle technical support cases on-site and via phone, WhatsApp, and email.
• Perform on-site installation, commissioning, troubleshooting, repair, and maintenance.
• Escalate and liaise with vendors on technical issues when required.
• Conduct product training and demonstrations for clients or users.
• Support internal product repair and training activities.

Requirements:

• Minimum Diploma in Electrical / Electronic Engineering, IT, or related field.
• At least 4 years of relevant experience.

Singaporean Only

Only shortlisted candidates would be notified

MTC Consulting Pte Ltd | 15C7752
EA. Registration No.: R22111807 | Yap Teng Hui

Job Description:

 Designs, builds, and maintains applications specifically optimized for cloud environments, focusing on scalability, resilience, and automation

 Key responsibilities include creating microservices, containerizing applications (Docker, Kubernetes), and developing CI/CD pipelines

 Involvement in the entire software development life cycle including application development, implementation, testing, maintenance and documentation

 Review customer’s existing business workflows / system functionalities and provide recommendations for improvement

 Support architecture design during pre-sales and implementation phase

 Lead a small team of software engineers and mentor junior engineers

 Implement software best practices and be an advocate for the team

 Responsible for the installation, configuration and integration of COTS products with our software products

Technical Skill Sets:  Proficient in Container Technologies: Deep understanding of Docker and Kubernetes.

 Proficient in one or more back-end programming languages / frameworks such as GoLang or .NET/.NET Core

 Proficient with JavaScript and one or more front-end frameworks such as React

 Proficient in Git

 Proficient in Building applications directly on kubernetes platforms utilizing managed services.

 Proficient in Monitoring & Optimization: Ensuring service reliability, security, and cost-efficiency through logging, monitoring (e.g., Prometheus), and performance tuning

 Experience with DevOps CI/CD and testing tools (eg. Github Actions, ArgoCD)

 Good understanding of Agile/Waterfall software delivery methodology

 Able to work independently and as a team

Responsibilities

1. Develop design requirements for an NPU based on system-level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug any issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 5+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on experience in digital design is a must.
4. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
5. Experience in synthesis, with analysis of power, timing and area.
6. Disciplined, quality-minded, and highly driven for excellence.
7. Excellent team player and good communication skills.
8. MSEE/BSEE in Electrical Engineering or Computer Engineering.
9. Understanding of convolution operator and number system is required.
10. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
11. Experience in UVM verification methodology is a plus.
12. A plus to have SoC design experience.
13. Experience with optimizing micro-architectures for low-power and low-area is a plus.
14. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
15. Experience with past design experience with NPU / GPU / DSP design is a plus.
16. Experience with ARM or RISC-V processor systems is a plus.
17. Passionate and strong in general programming is a plus.

About the client:
Our client is a Reputed Bank.

Responsibilities:

• Design, implement, and configure OpenShift clusters and containerized applications
• Building a CI/CD pipeline for automating the provisioning and management of infrastructure components with Ansible and/or Terraform.
• Collaborating with cross-functional teams to ensure the infrastructure aligns with application requirements and organizational policies.
• Develop and maintain technical documentation related to design, configuration, usage, troubleshooting, backup, recovery, etc., for all OCP environments
• Troubleshoot Red Hat OCP configuration and services and container issues, working in collaboration with other relevant IT areas and vendor support towards a quick and effective resolution
• Work on container security solutions and ensure compliance with security policies.
• Manage OpenShift clusters for performance, availability, and capacity planning

Requirement:

• Bachelor’s degree in IT / Information Technology or any other field
• Minimum 3 years of practical experience in the implementation of OpenShift/Kubernetes environments
• Expertise with the RedHat OpenShift Container Platform/Kubernetes, Linux administration, Virtualization, Networking, and Security
• Experience in dealing with container configuration management, especially Helm and app-of-apps concepts.
• Experience working with infrastructure as code technologies such as Ansible, Terraform.
• Knowledge of application development, ideally Java Spring Boot.
• experience in CI/CD Pipeline and tools Bitbucket, Jenkins, JFrog Artifactory.

Interested candidates, who wish to apply for the above position, please send in your resume to Mohamed.basith@persolapac.com

We regret that only shortlisted candidates will be contacted.

EA License No. 01C4394
EA Personnel Reg.No. R1104824 (Samsudeen Mohamed Basith)

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.
By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolapac.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Job Description

• Industry/ Organization Type: Construction and Civil Engineering
• Position Title: Site Engineer (Building Construction)
• Working Location: Central
• Working Hours: 5.5 Days (Mon – Fri, 8:00 AM – 5:00 PM; Sat, 8:00 AM – 12:00 PM)
• Salary Package: Basic Salary
• Duration: Permanent Role

Key Responsibilities

• Assist Senior Engineers and Project Managers in monitoring project progress.
• Assist with QA/QC inspections to ensure works meet project requirements.
• Ensure safety standards are followed in the assigned work area, with support from the Safety Department.
• Supervise subcontractor works to ensure approved methods and materials are used.
• Attend progress meetings and coordinate with contractors and suppliers on project implementation matters.
• Attend site meetings when required.
• Inspect site works and monitor progress to ensure quality control and compliance with authority requirements.
• Coordinate internally with different departments and externally with clients and consultants.
• Assist in project planning, documentation, and site execution.
• Coordinate, supervise, and monitor site works, manpower deployment, material planning, and material ordering.
• Coordinate and follow up on project submissions.
• Prepare weekly site progress reports and other required submissions.
• Perform any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma or Degree in Civil Engineering, Construction Management, or a related field.
• Relevant site engineering or construction experience is preferred.
• Good understanding of site coordination, QA/QC inspection, and construction safety requirements.
• Able to read and interpret construction drawings, method statements, and project specifications.
• Good coordination and communication skills.
• Able to work independently and as part of a team.
• Proficient in Microsoft Office and relevant project documentation tools.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #10081 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description:

• Develops and optimizes BCD process technology and devices for power applications, involving TCAD simulations, device layout, characterization, and bench testing
• Develop and integrate new BCD device architectures and process modules for company BCD platforms.
• Conduct TCAD simulations to understand device behavior and calibrate simulation models to match experimental results.
• Design and lay out device test structures and new BCD device platforms.
• Analyze device performance and reliability through bench testing and data collection.
• Work with cross-functional teams, including the modeling team, to satisfy customer needs and develop advanced device models.

Job Requirement:

• Min Degree in Physics or Electrical Engineering.
• Min 3 year of expereince in TCAD (Technology Computer-Aided Design) tools for simulation and calibration.
• Experience with device layout, design rule checks, and test structure generation.
• Knowledge of BCD process development and device characterization techniques.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Oversea travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

[Job ID: 1598168]

Responsibilities

• Support the Manager in handling contracts and preparing tender documentation
• Prepare and provide budgetary cost estimates based on project requirements
• Liaise with suppliers to obtain product and service details for tender submissions
• Identify and propose solutions to technical issues during tender stages
• Coordinate with internal departments to manage documents and resolve issues
• Follow up with suppliers and contractors on billing, quantities, and submissions
• Evaluate and monitor market unit rates for materials and labor on a monthly/quarterly basis
• Prepare tender clarifications and support interview and presentation processes
• Conduct site visits and attend tender site show rounds when required
• Transfer finalized tender documents and costing details to the project team upon award
• Perform additional ad-hoc duties as assigned

Requirements

• 3–5 years of experience as a Quantity Surveyor
• Experience in a subcontractor environment is an added advantage
• Ability to manage tender processes, costing, and supplier coordination
• Willingness to attend site visits and project briefings as required

We regret that only shortlisted candidates will be notified. However, all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations:

https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Saito Ryuya

EA Personnel Reg. no.: R23116168

EA License no.: 07C5771