Our client is in construction industry (Grade A1 Contractor), and they are currently seeking for M&E Engineer to be part of the team.

JOB DIMENSION (SCOPE)

• To verify the work done on site is in accordance with the approved drawings / specifications / authorities’ requirement, and to ensure that the subcontractor carry out rectification for non-compliance.
• To resolve site issues with consultants / subcontractor / supplier ASAP in order to minimize delay to the construction progress.
• To attend project / technical meeting and resolve site issues with owner/ consultants in order for the site progress to proceed smoothly.
• To cooperate with the safety department and carry out the assigned duties within the safety framework including permit to work.

REQUIREMENT

• Bachelor Degree in Mechanical/ Electrical Engineering
• More than 3years in M&E services & experience in main-contractor or sub-contractor M&E department

Onion Search Pte Ltd

EA License No: 24C2108

EA Personnel: Clover Lai Kah Wai

EA Personnel No: R24120119

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 3+ years of Digital Design and verification related experience
• Experience / knowledge in CMOS Image Sensor and Image Signal Processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Results oriented and adaptable to changes

• Permanent role
• Fast growing organisation in the tech security industry

About Our Client

We are partnering with a mid-sized player and fast growing organisation in the tech security industry, headquartered in US.

Job Description

• Able to design and code using Go to enhance the availability, scalability, latency, and efficiency of the systems
• To conduct and participate in code and design reviews to achieve and maintain high development standards
• Able to work with internal teams to explore and create new design/architectures for better scaling and performance of back-end services
• To engage in full-stack performance tuning and optimization

The Successful Applicant

• At least 5 years of working experience in back-end web development, mainly in Go language
• Strong experience in MySQL, MongoDB and other relational/NoSQL databases
• Strong experience in distributed systems design and architecture
• Has experience working on front-end languages is an advantage

What's on Offer

• Permanent role
• Fast growing organisation in the tech security industry
• Attractive benefits and overall remuneration package

If you are ready to take the next step in your career as a Senior Backend Engineer (Go), apply now to join a company that values innovation and excellence.

Contact

Cheryl Ang (Lic No: R2091316/ EA no: 18C9065)

Quote job ref

JN-012026-6913812

Phone number

+65 6416 9884

Michael Page (Personnel) Pte Ltd | Registration No.201736642C

• Basic $3,000 - $4,500 + AWS + VB + Transport Allowance

• Excellent Welfare and Benefits + Career progression

• Working location: Yishun

• Working days: Monday - Friday

• Working hours: 8.45am - 5.30pm
  

  
  

Job Responsibilities:

• Responsible in handling, coordination, design, execution, testing and documentation of project / system.
• Ensure all assigned projects / task run smoothly, including planning, controlling, execution and communicating with other departments.
• Manages engineering activities to ensure the technical content of project deliverables from detailed design through to commissioning is properly approved and delivered within budget and schedule.
• Coordinates with internal Sales team and other cross-functional team to clear all technical queries and Customer requirements.
• In-charge of the UV printer in preparation and producing product / system nameplate.
• Manage and monitor project and production stock items.
• Perform creation of Part Number in SAP & “Issue for Production” for project.
• Conduct project closing in SAP after project completion (item returning in SAP (RFP) and updating of SAP Bill of Materials).
• Physical issuance of project components during the kick-start of assembly job.
• Provides engineering input into project decisions and resolution of technical queries.
• Initiate / support on the process improvement activities of the department.
• Other duties as assigned

Requirements:

• Minimum a Diploma in Mechanical Engineering or any Engineering / Technical Field.
• Training will be provided for those without / with lesser experience.
• Familiarity with hydraulics is an advantage.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities

• Current and Expected salary

• Reason for leaving

• Date of availability

• Education background
  

We regret that only shortlisted candidates will be contacted

NG JYA YEE (R23119014)

EA Recruitment Pte Ltd

EA License No: 21C0492

Overview

Element has an opportunity for an Associate Engineer to join our rapidly expanding team. As a member of the operations team, the Engineer position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision. This role is based in Tuas Loop, Singapore.

Responsibilities

- Closely involved – as a contributing team member – with a variety of assignments with the laboratory

- Accountable for technical activities of a limited scope and may attain additional responsibilities for release of standard and/or routine data to clients

- Conduct Routine Tests such as stripping test, moisture content, rebar’s geometrical measurements

- Work with Engineer and lead with advanced tests, including tensile test and ad-hoc experiments.

- Accurately record and report data from tests.

- Possess the ability to effectively contribute to technical presentations and communications within the engineering discipline

Skills / Qualifications

- Possess a Diploma in Mechanical Engineering

- Working knowledge of laboratory safety

- In-depth understanding of testing concepts

- Ability to analyze and compile testing data from the tests performed

- Possess strong computer skills

Company Overview

Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to ‘Make tomorrow safer than today’.

When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access.

While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization.

Job Responsibilities:

1. Automation System Design & Implementation

· Design, develop and implement automation solutions for manufacturing processes to improve productivity, quality and cost efficiency.

· Integrate automation systems with injection moulding machines, assembly machines, conveyors, vision systems and testing equipment.

2. Injection Moulding & Assemble Automation Support (Added Advantage)

· Support automation integration for injection moulding machines, including robot take-out, insert loading, degating and post-moulding operations.

· Develop and optimize automation solutions for assembly machines such as part feeding, pick-and-place, screw fastening, press-fit and functional testing.

· Work closely with Process Engineers to improve cycle time, reduce manpower and minimize rejects.

3. Programming & Control Systems

· Program and troubleshoot PLCs, HMIs, robots (e.g. Fanuc, Yaskawa, ABB, Epson), and motion control systems,

· Develop and modify automation logic, sequences, interlocks and safety circuits.

· Ensure proper communication between machines using industrial protocols (Ethernet/IP, Profinet, Modbus and etc).

4. Troubleshooting & Maintenance

· Diagnose and resolve automation system faults, breakdowns and performance issues with minimal downtime.

· Provide on-site technical support during production, mould trials and new product launches.

· Conduct preventive maintenance and improvement activities on automation equipment.

5. Machine & Process Improvement

· Analyze existing production processes and identify opportunities for automation, cycle time reduction and efficiency improvement.

· Lead continuous improvement projects to enhance machine reliability, OEE and process stability.

· Support poka-yoke (error-proofing) and vision inspection implementation.

6. Safety, Compliance & Documentation

· Ensure automation systems comply with machine safety standards and company EHS requirements.

· Prepare and maintain automation documentation such as electrical drawings, PLC programs, SOP and risk assessments.

· Support IQ, OQ and PQ activities related to automated equipment where applicable.

7. Cross functional Collaboration

· Work closely with Engineering, Production, Quality and Maintenance teams to ensure smooth automation deployment.

· Coordinate with machine suppliers, system integrators and vendors for installation, debugging and upgrades.

· Provide training to technicians and operators on automation system operation and basic troubleshooting.

8. Project Management & Support

· Manage timelines, technical deliverables and project documentation.

· Assist in cost estimation, RFQ evaluation and automation feasibility studies.

Job Requirements:

· Minimum 1 to 3 years of hands on experience in industrial automation within medical device and/or precision plastic manufacturing environments.

· Strong working experience with injection moulding machines. Including robot take-out, insert loading, degating and post moulding processes.

· Proven experience in automation of assembly machines, such as part feeding, pick and place, press fit, screw fastening, welding and functional testing.

· Strong troubleshooting, problem solving and root cause analysis skills with ability to support production independently.

· Proficient in MS Office and other relevant software.

Work Location:   9 Tuas Drive 1 , Singapore 638676

Working Hours: Monday to Friday (8:15am to 5:30pm)

Job Description:

• Contribute to Life Science projects for Antaes Asia clients
• Develop and execute CQV documentation including commissioning protocols, FAT/SAT reports, IQ/OQ/PQ protocols, summary reports, and traceability matrices.
• Support end-to-end CQV lifecycle for process, utility, and support systems — e.g. bioreactors, chromatography skids, filtration units, CIP/SIP, WFI, HVAC, autoclaves, and clean utilities.
• Participate in design reviews (URS, FDS, P&ID walkdowns) to ensure CQV considerations are integrated during project design and construction.
• Manage execution of commissioning and qualification activities in alignment with project schedules, safety standards, and GMP compliance.
• Support automation qualification (DeltaV, PLC, SCADA) and ensure integration with process control systems.
• Review vendor documentation and coordinate FAT and SAT with suppliers and engineering teams.
• Troubleshoot and resolve technical issues encountered during CQV execution.
• Ensure all CQV deliverables meet internal Quality and Validation standards, and align with site Validation Master Plan (VMP).
• Support handover of qualified systems to Manufacturing and Maintenance teams, including training and documentation.
• Collaborate closely with cross-functional teams including Engineering, QA Validation, Manufacturing, and Automation.
• Contribute to the promotion of Antaes services on top of assistance provided to clients.

Job Requirements:

• Bachelor’s Degree in Chemical, Mechanical, Biomedical, or related Engineering field.
• 3–7 years of CQV experience in the pharmaceutical industry.
• Strong understanding of GMP, GEP, ISPE Baseline Guides, ASTM E2500, and FDA/EMA validation expectations.
• Experience in process equipment qualification (bioreactors, chromatography, UF/DF, CIP/SIP), clean utilities, and automation integration.
• Familiar with risk-based CQV approach and change control processes.
• Proficiency with documentation management systems (e.g., Veeva).
• Candidate must be highly motivated, be able to work independently as well as in a team and have good organizational and oral and written communication skills.
• Excellent communication skills, both written and verbal, in English - to coordinate and liase with English speaking counterparts.

Responsibilities

Equipment Automation Development

• Design, develop, deploy, and maintain Equipment Automation Programs (EAP) for assembly and test manufacturing equipment.
• Implement equipment integration using industry-standard protocols such as SECS/GEM.
• Support equipment recipe download/upload, remote control, and process parameter management.

Factory Integration

• Integrate new production equipment into the factory automation ecosystem.
• Collaborate with equipment vendors to develop and validate automation requirements.
• Perform equipment buyoff, qualification, and factory acceptance testing.
• Ensure seamless data exchange between equipment and manufacturing systems.

Production Support

• Provide 24/7 support (on-call when required) for equipment automation issues impacting production.
• Troubleshoot communication failures between equipment and host systems.
• Perform root cause analysis and implement corrective/preventive actions.
• Monitor EAP system health and equipment connectivity status.

System Enhancement

• Develop automation features to improve productivity, OEE, traceability, and manufacturing efficiency.
• Implement smart factory initiatives including Automated lot dispatching and Real-time equipment monitoring.
• Predictive maintenance data collection.

Industry 4.0 initiatives

• Support digitalization and manufacturing analytics projects.

Requirements

• Bachelor's degree in Computer Science/Computer Engineering/Electrical Engineering/Mechanical Engineering.
• 2 to 8 years of experience in semiconductor manufacturing, factory automation, or industrial automation.
• Experience in OSAT, wafer fabrication, electronics manufacturing, or high-volume manufacturing environments preferred.
• Strong troubleshooting and analytical skills.
• Strong knowledge of equipment automation protocols such as Secs/Gem, Semi E84.
• Experience in programming languages such as C#, python, etc.

1.       Determined appropriate construction methods, materials, and quality standards by reviewing and coordinating structural design and shop drawings to ensure compliance with project specifications and relevant codes.

2.       Drafted, interpreted, and reviewed engineering drawings, technical specifications, and construction procedures to ensure accuracy, constructability, and adherence to design intent.

3.       Coordinated with consultants, contractors, and fabrication teams to resolve technical design issues and implement necessary drawing amendments.

4.       Prepared and submitted technical documentation, including design approval requests and revised drawings, ensuring proper document control and compliance with quality management systems.

5.       Monitored design modifications, assessed their impact on construction methodology and project progress, and facilitated necessary revisions to maintain alignment with approved designs.

6.       Reviewed and checked structural design calculations provided by consultants for temporary and permanent works, ensuring operation team can met design requirements and were suitable for safe execution.

7.       Established and maintained coordination between design and site teams to support effective execution of construction activities.

8.       Provided technical support to the construction team by addressing reinforcement and structural queries raised during inspections and site activities.

9.       Maintained updated records of structural components and construction progress to ensure accurate documentation and tracking of completed works.

Job Description & Requirements

We are seeking a highly motivated and skilled Civil Engineer to join our team. As a Civil Engineer, you will play a crucial role in overseeing site supervision works and coordinating with various stakeholders to ensure project success. If you have a strong background in construction, excellent analytical skills, and a passion for delivering high-quality projects, we want to hear from you.

Responsibilities:

- Collaborate with the Project Manager to supervise site activities and ensure adherence to project specifications.

- Coordinate effectively with internal departments, clients, consultants, and subcontractors to ensure smooth project execution.

- Liaise with consultants, contractors, and authorities on project-related matters, maintaining strong professional relationships.

- Utilize your technical expertise to provide valuable insights and solutions for project challenges.

Requirement

- Bachelor's degree in Civil Engineering (Recognised By Professional Engineers Board, Singapore)

- Prior experience in the construction of general building projects is preferred.

- Minimum 2 years of experience in a similar capacity, specifically in construction projects within Singapore.

- Strong initiative and excellent analytical skills to identify and resolve issues efficiently.

- Proficiency in software such as AutoCAD, 3D BIM, and Microsoft Works.

- Salary range: $3K - $4.8K.

Join our dynamic team and contribute to the successful completion of prestigious projects. Apply now and take the next step in your career as a Civil Engineer.

Fresh Grads Welcome.

Job Description & Requirements

We are seeking a highly motivated and skilled Civil Engineer to join our team. As a Civil Engineer, you will play a crucial role in overseeing site supervision works and coordinating with various stakeholders to ensure project success. If you have a strong background in construction, excellent analytical skills, and a passion for delivering high-quality projects, we want to hear from you.

Responsibilities:

- Collaborate with the Project Manager to supervise site activities and ensure adherence to project specifications.

- Coordinate effectively with internal departments, clients, consultants, and subcontractors to ensure smooth project execution.

- Liaise with consultants, contractors, and authorities on project-related matters, maintaining strong professional relationships.

- Utilize your technical expertise to provide valuable insights and solutions for project challenges.

Requirement

- Bachelor's degree in Civil Engineering (Recognised By Professional Engineers Board, Singapore)

- Prior experience in the construction of general building projects is preferred.

- Minimum 8 years of experience in a similar capacity, specifically in construction projects within Singapore.

- Strong initiative and excellent analytical skills to identify and resolve issues efficiently.

- Proficiency in software such as AutoCAD, 3D BIM, and Microsoft Works.

- Salary range: $3K - $4.8K.

Join our dynamic team and contribute to the successful completion of prestigious projects. Apply now and take the next step in your career as a Civil Engineer.

Fresh Grads Welcome.

Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

The Project Engineer reports to the Project Manager and is responsible for the below:

• Prepare and submit required documents for Project, working with respective stack holders based on project proposal.
• Prepare and maintain the project document summary.
• Upon confirmation of project resources, update other stakeholders to prepare submission and record for final MDR.
• Prepare and follow up with Engineering and drawing related documents.
• Receive, review, update and issue latest revised drawing to project team.
• Prepare and monitor STQ / RFI for technical details.
• Preparation and updating of project schedule.
• Prepare and update Regular reports and Project Forecast.
• Base on approved layout and schematic drawings, prepare and update MTO upon approval from client.
• Escalate any abnormalities compared to bidding quantity to PM and procurement team.
• Update the revised MTO (material take off) to project team, ensuring material availability as well as manpower resources.
• Attend daily toolbox meeting.
• Update Project managers about the progress, plans and challenges.
• Assist in the preparation of the complete subcontract Scope of Work.
• Work with all stakeholders to ensure that we have the latest equipment connection drawings.
• Prepare, monitor and update status to procurement, and submit monthly progress claim.
• Record additional works and variation orders.
• Prepare variation claim with proposal team.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Engineering or equivalent.
• Min. 3 - 5 years of relevant working experience, preferably managing projects for Semi-con, Pharma & Oil & Gas.
• Proficient knowledge in AutoCAD software & Microsoft Office.
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Join us in adding value everyway and creating value everyday with pride and with passion!

You will be part of the engineering team responsible for engineering design, regulatory submissions, and project management activities. The role includes leading and supervising Engineers and Engineering Assistants to ensure projects are delivered efficiently, safely, and in compliance with regulatory requirements.

Key Responsibilities

• Prepare, review and coordinate civil and structural designs, calculations, drawings, specifications and technical reports in compliance with applicable codes, standards, and safety regulations.
• Manage regulatory submissions, approvals and technical queries with relevant Singapore authorities.
• Coordinate multi-disciplinary design and project interfaces with clients, EPC contractors, architects, M&E consultants and regulatory officers.
• Planned manage assigned work to ensure delivery within project quality, schedule and budget requirements.
• Support site execution, resolve technical issues and provide practical, safe and cost-effective engineering solutions.
• Supervise, mentor and manage Engineers and Engineering Assistants and review their technical deliverables.

Requirements

• Minimum bachelor's degree in civil engineering recognized by the Professional Engineers Board Singapore, or an equivalent recognized qualification.
• Minimum4 years of relevant consulting, design and project-delivery experience. Fresh graduates and entry-level candidates are also welcome to apply for engineer positions.
• Eligible and motivated to progress towards Singapore Professional Engineer registration; existing PE registration is an advantage.
• Good knowledge of Singapore standard and codes, regulatory requirements and statutory submission processes.
• Experience in industrial plants, petrochemical, pharmaceutical, power, port, marine, reclamation or EPC projects is advantageous.
• Strong technical, communication, coordination and leadership skills.
• Self-motivated, proactive, and able to work independently as well as in a team, with the ability to handle ad-hoc engineering challenges in a fast-paced environment.
• Proficiency in AutoCAD, BIM, and civil engineering software applications.

What We Offer

• Career progression and support towards professional registration.
• Opportunities to lead specialized mega infrastructure projects.  
• Leadership role to lead, supervise, and mentor a team of Engineers and Engineering Assistants.
• A collaborative professional environment with competitive remuneration based on experience and qualifications.
• Interested candidates are invited to submit their resume, availability and expected salary.

In Maybank, we are seeking a hands-on, execution-focused professional with strong domain and technical understanding to support the delivery of fintech initiatives within the Fintech & Emerging Tech Centre of Excellence (CoE). 

This role is responsible for bridging business requirements and technology delivery— enabling PoCs, supporting integrations, and ensuring successful pilot-to-production outcomes. 

You will work at the intersection of business, technology, and external fintech partners to design, validate, and operationalize scalable solutions across priority domains. 

Key Responsibilities 

Business Analysis & Requirement Engineering 

• Elicit, analyze, and document business, functional, and non-functional requirements across fintech initiatives. 

• Translate business needs into detailed functional specifications, user stories, process flows, and data requirements. 

• Facilitate workshops with stakeholders to define use cases, journeys, and success criteria. 

• Perform gap analysis between current and target state processes and systems. 

Solution Design & Tech Translation 

• Act as a bridge between business and engineering teams to ensure clear interpretation of requirements into system design. 

• Define solution workflows, sequence diagrams, and integration touchpoints. 

• Support API/interface specification, including request/response structures and data mapping. 

• Contribute to solution architecture discussions with a focus on feasibility, scalability, and maintainability. 

PoC, Sandbox & Delivery Support 

• Support end-to-end PoC execution including use case definition, data preparation, testing scenarios, and success metrics. 

• Assist in configuring sandbox environments and validating solution outputs against business expectations. 

• Develop test cases, UAT plans, and validation frameworks. 

• Track PoC outcomes and document insights for decision-making. 

Integration & Data Analysis 

• Work on API-based integrations, including requirement definition, payload validation, and testing. 

• Perform data mapping, transformation logic definition, and reconciliation checks across systems. 

• Analyze system interactions and troubleshoot integration or data issues during testing phases. 

Governance, Risk & Documentation 

• Ensure requirements and solutions comply with technology standards, security requirements, and regulatory expectations. 

• Support third-party onboarding by documenting functional flows, data handling, and control points. 

• Prepare BRDs, FSDs, solution design documents, and governance materials for internal review forums. 

Role Requirements

• 7–12 years of experience as a techno-functional analyst or in software development roles in banking, fintech, or technology-driven environments. 

• Domain knowledge in one or more areas - Payments, Trade Finance, Wealth, Digital Platforms, or Data & AI. 

• Strong experience in requirement gathering, functional analysis, and documentation (BRD/Tech specs/user stories). 

• Working knowledge of APIs (REST/JSON), system integration methods, and data flows. 

• Familiarity with technical concepts such as microservices, cloud environments, and system architecture basics. 

• Hands-on exposure to PoCs, UAT, testing cycles, and implementation support. 

• Experience in data analysis, mapping, and reconciliation across systems. 

• Understanding of security, regulatory, and third-party risk considerations in banking. 

• Experience working in Agile environments (Scrum, user stories, sprint cycles). 

• Strong stakeholder management, communication, and problem-solving skills. Communicate complex technical concepts in a clear, business-friendly manner. 

• Bachelor's degree in engineering, business, finance, or related fields. 

Job Description & Requirements

Job Responsibilities

Serve as the software technical liaison for overseas automotive OEM customer projects, responsible for technical communication, reviews, delivery, and issue troubleshooting:

1. Responsible for requirements decomposition and modular design compliant with Automotive SPICE framework;
2. Responsible for writing embedded code, debugging, performance optimization according to Automotive standards;
3. Produce design documents, reports, and other deliverables required by A-SPICE processes;
4. Analyze and resolve technical issues during the software development process, and collaborate with relevant departments for product debugging;
5. Responsible for supporting customer reviews of software-related designs.

Job Requirements

1. Bachelor’s degree or above in Computer Science, Electronics, Automation, or related fields;
2. 3+ years or more of experience in automotive electronic software development, proficient in driver development and debugging, familiar with TCP/IP protocol, proficient in software analysis and design based on SOC or FPGA;
3. Proficient in C or C++ programming;
4. Knowledge and skills in automotive cybersecurity are a plus;
5. Fluent in both Chinese and English (listening, speaking, reading, and writing), able to work in cross-cultural environments, and willing to travel;
6. Strong communication and coordination skills, team-oriented, and accountability for deliverables.

Introducing the Elice AI Education Strategy Team

The AI Education Strategy Team drives the global expansion of Elice LXP, our AI-powered learning platform, serving as both Tech Sales and Tech PM in the B2B space. We've established presence in Singapore, Thailand, and Bhutan, and built solid references by winning public sector contracts with organizations including Singapore's Ministry of Defence, Ministry of Education, Brunei, and Indonesia.This team goes beyond reselling—we analyze markets firsthand, identify and manage local partners, and localize products to meet regional requirements. We navigate each country's procurement systems, budget structures, and education policies to execute phased strategies from proposal development through PoC, pilot operations, and final contracts.Building on our Singapore success, we're expanding globally around key themes: AI Talent Development, AX (AI Transformation) Adoption, and Sovereign AI. Our proven Singapore model isn't just a success story—it's evolving into a replicable business framework and operational playbook applicable to other countries and domestic markets.Joining this team means designing and validating global B2B SaaS business models through the lens of Tech Sales and Tech PM. You'll negotiate with stakeholders across countries, manage multiple projects simultaneously, and generate market insights that shape product roadmaps. This role goes beyond sales—you'll help build 'Global Growth.'This team is ideal for those who want to understand country-specific policies, procurement structures, and talent development strategies, and leverage that knowledge to create scalable international business models.

엘리스 [Singapore] AI Engineer는 어떤 역할을 하나요?

You'll become a core developer who directly designs and implements AI Agents that transform the paradigm of education. You'll experience the entire AI development lifecycle from prototype stage to actual operational systems, building innovative AI algorithms that automatically generate hands-on exercises, projects, and quizzes. Through advancing RAG (Retrieval-Augmented Generation) frameworks, you'll enhance AI's contextual understanding capabilities and pursue the challenging goal of achieving TRL 9 level technology readiness. Seize the opportunity to gain practical experience with cutting-edge LLM technology and conversational systems while growing as an AI expert in the global EdTech field!

Develop and deliver scalable ETL/ELT solutions across Teradata and Hadoop platforms by building robust data pipelines, ingestion frameworks, and automation capabilities. Ensure efficient data processing, performance optimization, and reliable integration of enterprise data sources, while supporting data warehouse, CDC, and MDM initiatives.

Responsibilities

• Create EDW ETL/ELT codes using Teradata SQL, Informatica, Apache Spark, QueryGrid, Trino to perform various transformations and load into Teradata based data warehouse or datamarts
• Performance tuning of highly complex applications to reduce resource usage
• Create framework using GCFR, shell scripts, BTEQ and shell scripts to automate end to end. Also to integrate with control
• Build in-house CDC framework using Java to process OLR logs from SAP(Oracle) and ingestion the data into Teradata. Create framework around this CDC ingestion to make it configurable
• Install and build Master Data Management (MDM) application for various user uploads along with data validations and approval workflow.

Qualifications

• Bachelor’s or Master’s degree in Computer Science, Engineering, Information Technology, or a related field.
• Minimum of 7+ years of professional experience
• Strong hands‑on experience with the ETL(Informatica Power Center) and Teradata based ETL development, similarly Hadoop ecosystem (Hive, Impala, Spark, Kafka, Iceberg, Ranger, Atlas, Nifi, Flink etc.,), and data pipeline orchestration.
• Create EDW ETL/ELT codes using Teradata SQL, Informatica, apache Spark, QueryGrid, Trino to perform various transformation and load into Teradata based data warehouse or datamarts
• Performance tuning of highly complex applications to reduce resource usage
• Create framework using GCFR, shell scripts, BTEQ and shell scripts to automate end to end. Also to integrate with control
• Build in-house CDC framework using Java to process OLR logs from SAP(Oracle) and ingestion the data into Teradata. Create framework around this CDC ingestion to make it configurable

Install and build Master Data Management(MDM) application for various user uploads along with data validations and approval workflow.

Key Skills:


• ETL/ELT Development using Informatica Power Center and Teradata
• Data Platform Expertise
• Data Pipeline & Orchestration using enterprise scheduling tools
• Performance Optimization
• Data Integration & CDC
• MDM – Reference data management
• ETL Framework & Automation Development

Responsibilities

• Lead the design and development of interactive 3D visualization interfaces using Unity 3D, including real-time digital twin dashboards and OT operational views.

• Architect and implement geospatial rendering systems - integrating map layers, coordinate systems and spatial data into Unity-based frontends.

• Design and deliver seamless integration between Unity frontend components and backend systems, middleware, IoT/OT data pipelines, and REST/WebSocket APIs.

• Collaborate with IoT, OT, and robotics engineering teams to translate telemetry, sensor, and asset data into real-time 3D visualisation.

• Drive technical decisions around rendering performance, level-of-detail (LOD) strategies, shader optimisation, and scene management for large-scale operational environments.

• Build and maintain reusable UI component libraries within Unity, aligned to UX guidelines and design system standards.

• Define and enforce frontend engineering standards, coding conventions, and review practices

• Engage with product owners, systems architects, and client stakeholders to ensure frontend solutions meet functional and non-functional requirements.

• Contribute to CI/CD pipeline integration for build artefacts, automated testing, and deployment workflows.

Requirements

• Bachelor's degree or higher in Computer Science, Software Engineering, Geospatial Science, or equivalent discipline.

• Minimum 5 years of software engineering experience, with at least 3 years focused on Unity 3D development in a production environment.

• Demonstrated delivery of Digital Twin or 3D visualisation solutions for operational, industrial, or smart city domains.

• Understanding of IOT integrations such as OPC-UA, Modbus, MQTT, - Middleware integration and BMS integration

• Understanding of Command and Control (C3) systems.

• Hands-on experience integrating real-time IoT/OT sensor data into interactive 3D or geospatial frontends.

• Track record as a subject matter expert - driving architecture decisions, conducting code reviews, and managing delivery risk.

• Strong understanding of systems engineering principles; able to design frontend components with awareness of full-stack integration constraints.

Licence no: 12C6060

Requirement:
3–7 years of relevant experience in infrastructure or platform operations.
Strong problem-solving and analytical skills with the ability to work independently.
Experience in enterprise infrastructure environments.
Familiarity with vendor and contract management.
Strong communication skills to engage both technical and non-technical stakeholders.
Strong teamwork, organizational, and interpersonal skills.

Technical Requirements:

1. Experience with virtualisation platforms (e.g., VMware vSphere, Hyper-V, Nutanix).
2. Experience with storage systems (SAN, NAS) and enterprise backup solutions (e.g.,Commvault, Veeam, Cohesity).
3. Proficiency in Red Hat Linux and/or Windows Server administration.
4. Familiarity with monitoring and observability platforms.
5. Solid understanding of networking concepts, including TCP/IP, DNS, DHCP, routing and switching, firewalls, load balancing, and network segmentation.
6. Understanding of data centre network fundamentals.
7. Experience with high-availability and disaster recovery solutions.
8. Experience supporting infrastructure modernization and migration initiatives.
9. Strong documentation skills.
10. Familiarity with cloud platforms (e.g., AWS, Azure) and hybrid infrastructure concepts.

1. Maintain and support critical infrastructure platforms, including compute, storage, virtualization, and supporting systems across development, staging, and production environments.
2. Implement platform standards, automation, and modern operational practices to improve efficiency and reliability.
3. Support infrastructure enhancement and modernisation initiatives in alignment with enterprise architecture standards.
4. Manage virtualisation platforms (e.g., VMware, Hyper-V, Nutanix), including capacity monitoring, performance optimisation, and lifecycle management.
5. Execute patching and upgrade strategies using automation while minimising service disruption.
6. Provide L2/L3 technical support, including incident management, root cause analysis, and problem resolution.
7. Maintain backup, disaster recovery (DR), and high-availability (HA) solutions.
8. Implement and enforce security controls, including access management, system hardening, and compliance monitoring.
9. Collaborate with application, network, and vendor teams to ensure platform stability, scalability, and service performance.
10. Develop and maintain documentation, runbooks, and standard operating procedures (SOPs).
11. Support and troubleshoot infrastructure and network-related issues to ensure end-to-end service availability.
12. Support cloud migration and hybrid infrastructure initiatives, including workload assessment, migration planning, and post-migration operational support.

Job Description

We are looking for (Senior/Staff) Software Engineers to grow our Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

This position works in a smaller team that specifies, develops and delivers the toolchain that allows our customers and partners to develop or port AI models to run optimally on our Neural Processing Units.

Responsibilities

• Specify and develop new toolchain features for existing and new NPU architectures, working with the inference engine sub-team
• Enhance, maintain and support existing toolchain features, and modify model network layers for NPU optimality, working with the application engineering teams and sometimes customers/partners.
• Constantly improve productivity through automation in all areas

Skills

• Strong Python class based product development skills based on knowledge of design patterns
• Strong understanding of all aspects of a compiler and related development and debugging technologies, code generation, program analysis, and pipeline optimizations
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc.

Familiarity with the following is a plus:

• Deep Learning compilers like TVM
• Deep Learning framework - PyTorch
• Eclipse development for toolchain frontend
• CPU/DSP/GPU/NPU architectures

Requirements

1. Ph.D./MS/BS in Computer Science or Computer Engineering
2. At least 5 years of commercial development experience of which at least 3 are in compiler-related areas

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solar's Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for REC's strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, India's largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

We are looking for a Ingot & Wafer (IW) cum Contract Manufacturing Engineer with good ethics and strong passion to take on proactive roles of qualifying and managing external suppliers to achieve company's strategic directions and key yearly goals for ingot and wafer factory. This position requires good analytical and interpersonal skills to work with external suppliers to achieve continuous improvements in IW cost, yield and cell efficiency by implementing best known methods. Selected candidates will work closely with the Process/Integration/QA and Planning team to define all the necessary process and Quality Control procedures to meet product functional and reliability requirements. Frequent travelling to India HQ and ability/willingness to travel at short notices will be a pre-requisite in view of the job nature and requirement.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Safety

• Engineer must adhere to all the HSE principles and WI during the work.

Quality

• Remember all WI, SOP, and Quality Policy. Work with related internal departments (such as Production, Equipment, Quality, Technology) and external suppliers to resolve wafer/cells/modules quality issues and implement required decisions made by internal management at the external supplier sites.
• Ensure no quality issues during qualification/certification and proper change management implementation phase.

Delivery

• Possess excellent project management skills by establishing schedules, coordinating with required resources both within the organization or external suppliers, projecting cost of qualifications/certification projects and risks identification to implement and execute the required projects.
• Responsible to generate bill of materials (BOMs) and Design/Engineering change, product transfer to internal/external lines and lead in DFMEA/PFMEA for product change.
• Ability to create and maintain excellent internal/external customer supplier relationship through excellent interpersonal and communication skills.
• The Key Performance indicators are the results and prompt project schedule control.

Cost

• Initiate and lead cost-reduction projects relating to cost reduction.
• These types of projects will relate to man, method, machine, and materials.
• In cases where projects are not initiated, participation towards such project will also be required.
• Assessment on external suppliers for IW and external wafer as potential cost driver as alternative/new material as well as supply risk mitigation.

Continuous Improvement

• Initiate and lead projects relating to IW cost reduction, IW production yield, cell efficiency and module power improvement activities.
• To run and execute projects base on RPDM process flow.
• Engineer will have the chance to research on new processes and materials at the suppliers' site to be implemented into our internal production environment.

Others

• Perform other duties as assigned. Duties will vary according to the degree of difficulties and involvement of the specific targets set in the department.
• Develop and maintain proper job methods, work instructions and change management.
• Regular reporting of project status.
• Lead trouble-shooting and root cause analysis efforts to resolve issues.

ESSENTIAL JOB COMPETENCIES:

Technical

• Strong technical knowledge in solar ingot growth, wafer manufacturing, and wafer-related process development.
• Familiarity with new material evaluation, qualification, and R&D activities for photovoltaic applications.
• Good understanding of process parameters, material behavior, product performance, and manufacturing requirements across upstream and downstream operations.
• Able to work in a fast-paced environment with good adaptability and professional judgment.
• Proficient in engineering data analysis, statistical interpretation, and technical assessment to support development and process improvement.
• Proficiency in English Language and at least one other language(s) is necessary to liaise with various stakeholders incl. vendors/suppliers.

Analytical & Problem Solving

• Strong analytical capability to identify technical gaps, interpret data trends, and solve process or material related issues effectively.
• Able to perform root cause analysis, evaluate risk, and develop practical corrective and preventive actions.
• Capable of translating complex engineering data into clear conclusions and actionable recommendations.

Soft Skills & Professional Attributes

• Good communication and collaboration skills to work effectively with cross-functional teams, suppliers, and stakeholders.
• Proactive, detail-oriented, and results-driven, with a strong sense of ownership and accountability.
• Able to work in a fast-paced environment with good adaptability and professional judgment.

Leadership

• Able to provide technical guidance and influence decision-making in material development, qualification, and process improvement activities.
• Demonstrates initiative in driving problem resolution, cross-functional alignment, and continuous improvement.
• Capable of supporting team development through knowledge sharing and technical mentoring.

Project Management

• Experience in managing technical projects related to material qualification, process development, plant ramp-up, or cost reduction initiatives.
• Able to coordinate timelines, resources, deliverables, and stakeholder communication to ensure effective project execution.
• Strong ability to prioritize tasks, track progress, and deliver outcomes within schedule and business objectives.

ADDITIONAL RESPONSIBILITIES:

• Perform other duties as assigned. Duties will vary according to the degree of difficulties and involvement of the specific targets set in the department.
• Develop and maintain proper job methods, work instructions and change management.
• Regular reporting of project status.
• Lead troubleshooting and root cause analysis efforts to resolve issues.

Technical / Professional:

• Degree in Electrical/Electronics/Mechanical/ Materials Engineering.

Technological:

• Working experience in Solar/Semiconductors/Electronics manufacturing industries will be an advantage.
• Knowledge in Semiconductor/Ingot & Wafer, Solar cell and module processes
• Knowledge in FMEA, DFMEA, DOE, Fish-Bone Analysis
• Strong technical analysis competency with the use of analytical tools like JMP, Mini-Tab for troubleshooting and data mining.

General:

• Suitable to work in cleanroom, outdoor testing, and wafer slicing/manufacturing environments.
• Able to adapt to different working conditions and support hands-on technical activities. Able to carry cell/wafer for testing. (
• Familiar with safety, discipline, and operational requirements in both lab and production settings.
• Ability to work under stress in a fast-paced environment with self-motivation.

People/Relations:

• Dynamic & committed with proactive working attitude.
• Ability to initiate without being asked.
• Challenging spirit to improve current conditions.
• Highly effective personal skills - communication and organization.
• Good Team player.

People Management:

• Able to work effectively with cross-functional teams across R&D, engineering, production, and quality.
• Capable of guiding team members, coordinating tasks, and supporting timely issue resolution.
• Demonstrates good communication, teamwork, and accountability.

Project Management:

• Able to manage technical projects related to material evaluation, process development, and cost improvement.
• Capable of coordinating timeline, resources, and deliverables to ensure smooth execution.
• Able to identify risks, track progress, and drive project completion.

Additional Advantageous Skills:

• Ability to perform software simulations using SPICE or MATLAB.
• Electrical characterization and physical characterization/ Failure Analysis tools for systematic troubleshooting and improvement.
• Characterization tools/technique competency preferred include: IQE tester, Spectrophotometer, Ellipsometer, Semilab WT-2000, Sinton WCT-1200, Corescan, Photoluminescence Technique and Electroluminescence Technique.

• 5 Work Days Per Week
• Current Office Near to Kaki Bukit MRT
• Will Relocate to Tai Seng MRT in August 2026
• Medical & Dental Benefits Provided
• Entitled to Yearly Bonus & Performance Bonus

Responsibilities ( Lead & Head of Site Reliability Engineer | SRE Manager )

High Availability and Stability Maintenance of Application Systems:

• Includes daily monitoring, alert response, emergency handling, on-call duties, regular system health checks, and performance optimization.

Compliance and Secure Access Construction for Application Systems:

• Ensure operational design, processes, and data management comply with relevant privacy and data protection laws.
• Ensure compliance with full auditing and regulatory checks and provide auditing materials as required.

Change and Release Management:

• Best practices for application system changes, including change control, version management, and rollback strategies, while ensuring operational duties during release windows.

Automation and Infrastructure Optimization:

• Drive operational automation by designing and implementing automated tools and processes, ensuring resource allocation is optimized and supporting business scalability.

Other Operational Practices and Work Arrangements:

• Providefeedback and suggestions for business architecture design and continuously produce operational technical documentation.

Qualifications

1. Bachelor’s Degree or above; a degree in computer science or a related field is preferred.
2. At least 5 years of experience in cloud services products and application operations and minimum 1 year of managerial experience.
3. Familiar with cloud platform deployment and management (AWS, Azure, Google Cloud, etc.).
4. Experience with automation operations and container technologies (Docker, Kubernetes).
5. Familiarity with CI / CD processes and tools (e.g Jenkins, GitLab CI).

Reolink, a leader in intelligent visual technology for homes and businesses, was founded in 2009 by a group of engineers with a strong commitment to and passion for smarter security solutions.

Our Products are now trusted by millions of users across more than 110 countries and regions worldwide. Building on this trust, we continue expanding our presence and bringing our innovations to more markets around the globe.

Reolink remains committed to delivering advanced, reliable, and user‑centric solutions that empower people to protect what matters most.

Job Summary

The Institute of High Performance Computing (IHPC), A*STAR, was established in April 1998 to provide leadership in high performance computing as a strategic resource for scientific inquiry and industry development. Our mission is to advance science and technology, and develop leading-edge applications through high performance computing and computational science. We have long-term ties with industry partners, including multinational companies and local SMEs, which ensures that our R&D activities stay focused and relevant to real-world needs. We also have active cooperation with the world’s top academics and academic institutions.

We are looking for a motivated and versatile individual to join the Healthcare team. The role will support the development, adoption, and continuous improvement of reusable AI assets and platforms through ecosystem engagement, platform operations, product thinking and practical UI/UX capability.

Research Engineer (Reusable Healthcare AI Assets)

The successful candidate will work closely with researchers, engineers, product owners, healthcare and public-sector stakeholders, and industry partners to identify user needs, translate them into actionable platform requirements, and drive the adoption of reusable AI assets. The role is suitable for someone who can engage stakeholders effectively, structure feedback into product and operational priorities, and contribute to simple, intuitive user journeys, wireframes, prototypes, dashboards, and documentation for AI platforms.

Requirements

• Experience in at least one of the following areas: AI/ML platform delivery, product or platform operations, technical project management, ecosystem or stakeholder engagement, developer relations, digital transformation, UI/UX design, or technology adoption.
• Working understanding of AI/ML systems, data-driven applications, software platforms, APIs, cloud environments, MLOps, or reusable software/assets. Deep research specialisation is not required, but the candidate must be comfortable working with technical teams.
• Ability to translate between domain needs, user pain points, operational constraints, and technical implementation requirements.
• Practical exposure to user research, journey mapping, wireframing, prototyping, usability testing, information architecture, or interface review.
• Strong written and verbal communication skills, with the ability to explain technical capabilities and trade-offs to both technical and non-technical audiences.
• Good planning, coordination, and stakeholder management skills, with the ability to manage multiple workstreams independently in a fast-moving environment.

Preferred qualifications (one or more of the following)

• Experience in healthcare, biomedical, public-sector, or regulated digital systems.
• Hands-on experience with UI/UX or prototyping tools such as Figma, Miro, FigJam, Balsamiq, or equivalent.
• Ability to build lightweight prototypes, demos, or dashboards using tools such as React, JavaScript/TypeScript, HTML/CSS, Streamlit, Gradio, Dash, Tableau, Power BI, or similar.
• Experience managing reusable asset catalogues, platform onboarding journeys, technical documentation portals, design systems, knowledge bases, or developer-facing resources.
• Familiarity with agile delivery and collaboration tools such as Jira, Confluence, Git, GitHub/GitLab, or equivalent.
• Awareness of responsible AI, model evaluation, AI safety, data privacy, cybersecurity, and governance considerations for AI systems.

Interested applicants should submit their curriculum vitae, together with a short cover note describing relevant experience in ecosystem engagement, platform operations, AI/ML systems, and UI/UX or product-related work. The level of appointment will be commensurate with experience.

For applicants, please send your curriculum vitae to Dr Ricardo Shirota Filho (ricardo_shirota_filho@a-star.edu.sg)

Job Description

• Industry/ Organization Type: Engineering/Construction
• Position Title: Project Engineer (M&E – Plumbing & Sanitary)
• Working Location: Sungei Kadut
• Working Hours: 5 Days (Monday – Friday, 8:30 AM – 6:00 PM)
• Salary Package: Basic Salary + VB
• Duration: Permanent Role

Key Responsibilities

• Manage site operations and oversee a team of site supervisors and subcontractors.
• Coordinate tasks and communicate with clients and consultants.
• Ensure construction progress is on track according to the project schedule.
• Enforce quality control and safety management protocols.
• Keep site staff and subcontractors updated on approved materials and the latest drawings.
• Coordinate different trades working on-site to ensure smooth execution.
• Any ad hoc duties assigned

APPLY NOW!!!

• Diploma or Degree in Mechanical Engineering.
• Knowledge of residential and commercial building installation works.
• Experience with design tools like AutoCAD or Revit is an advantage.
• Familiarity with HDB projects is a plus.
• Candidates without relevant qualifications must have at least 3 years of experience in a similar role.
• Candidates without relevant experience are welcome to apply; Training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #84375 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description:

• Develops and optimizes BCD process technology and devices for power applications, involving TCAD simulations, device layout, characterization, and bench testing
• Develop and integrate new BCD device architectures and process modules for company BCD platforms.
• Conduct TCAD simulations to understand device behavior and calibrate simulation models to match experimental results.
• Design and lay out device test structures and new BCD device platforms.
• Analyze device performance and reliability through bench testing and data collection.
• Work with cross-functional teams, including the modeling team, to satisfy customer needs and develop advanced device models.

Job Requirement:

• Min Degree in Physics or Electrical Engineering.
• Min 3 year of expereince in TCAD (Technology Computer-Aided Design) tools for simulation and calibration.
• Experience with device layout, design rule checks, and test structure generation.
• Knowledge of BCD process development and device characterization techniques.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900