Total 32 job vacancies in Singapore

Requirements

·      Degreeon Mechanical/Electrical/Electronic Engineering or equivalent

·      Min3 years on Semiconductor or Manufacturing Industry

·       Knowledgeable in Equipment Assemblyand Test, hands-on experience with manufacturing tools.

·       Equipment troubleshooting andmaintenance.

·       Data Analysis and Problem-solvingskills, 8D/5 Whys/FMEA/CAPA.

·       BOM management and technical drawinginterpretation skills

·       Advance Microsoft Office skills withgood communication and writing skills.

Responsibilities

·       Primarily responsible for managingECOs for both new and existing products.

·       Create and maintain mFlow, PCP, pFMEA,and Work Instructions (WI).

·       Raise internal Engineering ChangeRequests (ECR) when required.

·       Support and drive continuous processimprovement initiatives to enhance quality and efficiency.

·      Cross-functional coordination with Procurement, BDG, Planner, and Buyerand QA

·      Support and oversee FA (First Article) builds to ensure compliance withEngineering requirements.

Job Description:

About us:

Cyrus Technology started in 2005 with the vision to approach polymeric tooling design in unconventional methods and providing manufacturing solutions to exacting specifications for ultra-precision and complex moulding. We pride ourselves as a valued partner to our clients, offering expertise at every stage of the product design to manufacturing, to transform market opportunity ideas to a marketable product. With the progress we achieved so far, we aim to continue to push boundaries and overcome constraints to be a leader in the industry.

About the Job:

As a production operator, your duties involve operating injection moulding machines to produce parts to meet production goals and timelines. Additionally, you will also be responsible for the quality control of products.

Your key responsibilities are as follows:

· Operate moulding machine in accordance to guidelines and instructions.

· Perform visual inspection of moulded parts as a first cut inspection.

· Perform inspection of moulded parts with the use of microscope to ensure it meets the required quality.

· Follow up on the job orders and production schedule timely to meet daily production targets.

· Ensure general workplace safety when operating the machines.

Your areas of knowledge and expertise that matter most for this role:

- Previous experience working in similar industry is beneficial

- Ability to use microscope to perform product cosmetic inspection

- Comfortable with working in white room and clean room environment

- Possess good communication skills

- Able to work independently and on a team

- Available to work rotating shifts

Role Summary

We are developing a manufacturing data and applications platform to support digitalization and automation across the organization. The role begins with building the foundational data layer—designing databases, pipelines, and system integrations—and progressively expands into developing business logic, backend services, and user‑facing applications on a modern manufacturing app platform. This position is well‑suited to an engineer who has demonstrable experience delivering production web applications to internal users, is comfortable working close to operations, and is eager to grow into a full‑stack role spanning data engineering, backend/API development, and front‑end application development.

Responsibilities

1) Data Foundations & Engineering

• Design and evolve a maintainable relational or structured data model suitable for hierarchical manufacturing data.

• Build and maintain data ingestion and transformation processes.

• Establish reliable technical integrations with manufacturing applications, including:

• Understanding source data structures and interfaces

• Implementing stable connectors for recurring data acquisition

• Handling schema or data format changes

• Setting up integrity checks, alerting, and automated recovery

2) Backend & Business Logic Development

• Develop backend services that implement core business logic for manufacturing business process flows.

• Collaborate with solution and application developers to translate requirements into actionable business logic design for prototyping.

• Build and maintain APIs or service endpoints used by downstream applications.

• Create reusable software components for consistent data access, validation, and transformation.

• Ensure backend components are secure, performant, and scalable.

• Ensure audit trail functionalities for data transformation events.

3) Front-End / Application Development

• Build user-facing applications on a modern manufacturing app platform software.

• Integrate applications with backend services, connectors, and data sources.

• Develop custom interface logic or extensions as needed.

• Collaborate with manufacturing users to refine UI/UX and workflow behavior.

4) Quality, Reliability & Operational Excellence

• Implement data quality checks such as referential integrity, anomaly detection, and completeness validation.

• Build resilience mechanisms into pipelines and services, including:

• Automated retries

• Fallback strategies

• Exception logging and diagnostics

• Monitor application and pipeline performance, availability, and data freshness.

• Produce QA summaries and reports for approval to Go Live.

5) Documentation & Engineering Practices

• Maintain technical documentation and diagrams for data flows, integrations, system logic, and API specifications.

• Participate in code reviews, testing, and continuous improvement of engineering standards.

• Produce operational guides, runbooks, and troubleshooting procedures.

Requirements

Qualifications & Experience

• Track record of building and maintaining in‑house, multi‑user, web‑based applications for internal stakeholders (e.g., portals, operational tools, or workflow apps).

• Strong programming fundamentals with hands‑on experience in at least one general‑purpose language (e.g., Python, JavaScript/TypeScript, C#, or equivalent).

• Solid SQL skills and practical experience designing or maintaining relational databases.

• Experience developing APIs or backend services (authentication/authorization, data access patterns, performance).

• Hands‑on experience integrating with external systems, databases, or APIs in a production environment.

• Working knowledge of enterprise operational data concepts (e.g., data contracts, lineage, quality checks, scheduling, and monitoring)—even if not from an engineering/manufacturing domain.

• UI/UX fundamentals sufficient to build intuitive, task‑oriented user interfaces and to iterate quickly with users (layout, usability, accessibility considerations).

• Good engineering hygiene: testing, Git, CI/CD, and writing clean, modular, well‑documented code.

• Ability to break down ambiguous requirements and ship maintainable solutions in iterative increments.

Soft Skills & Working Style

• Comfortable working independently and collaboratively in a cross‑functional environment.

• Clear, succinct communication with both technical and non‑technical stakeholders.

• Organized, detail‑oriented, and committed to documentation and maintainability.

• Hands-on approach to concept ideation with short turnaround functional prototypes.

• Growth mindset—willing to learn new tools, platforms (including low‑code), and manufacturing domain concepts.

• Ability to manage time effectively and adapt to changing priorities.

Nice-to-Have (Plus)

• Exposure to manufacturing/engineering systems or data.

• Familiarity with front‑end frameworks or UI‑centric development.

• Experience with BI tools (e.g., Power BI).

• Background in data governance or metadata management.

• Experience with workflow automation or low‑code platforms (e.g., Tulip, Power Apps, Mendix).

• Familiarity with cloud or containerization concepts.

Work Location

• Upper Changi

Job Summary

Perform Manufacturing Engineering activities within Engine Overhaul and Component Repair production areas. Act as the Technical Authority, ensuring the initial and ongoing capability of production methods to consistently produce conforming products, and driving the resolution of technical issues, problems, and deviations to meet business and customer requirements in safety, cost, delivery rate, and lead time (SQCD). Support the integration of all Manufacturing Engineering activities across the product lifecycle and throughout the supply chain.

Job Responsibilities

·       HSE – Ensure full compliance with Health, Safety & Environmental standards and meet the expectations of the Zero Harm programme.

·       Product Safety – Understand product safety risks and implement mitigation actions to achieve required safety levels in support of the Company’s Safety Management System.

·       Quality – Promote a zero-defect culture by ensuring manufacturing processes and methods are developed and deployed to support Right First Time principles. Support process and product quality investigations and manage NADCAP accreditation requirements.

·       Delivery – Ensure manufacturing processes and methods, including those of suppliers, are developed and deployed to support Right First Time delivery using SPS, DMAIC, and Systems Engineering tools. Manage FAIR/MSA activities and source and method changes within the area of accountability.

·       Delivery – Review and resolve identified issues, including troubleshooting strip/build, balancing, runout, in-situ repair, and component repair processes, as well as key equipment and tooling (ITT, VTL, BTG, Wash, FTB, CMM, etc.), and re-establish standards.

·       Cost – Support the area of accountability in meeting cost targets, including productivity and Cost of Non-Quality (CONQ).

·       Standards – Deploy and sustain SAESL Operating System standards in collaboration with the Cell/Area CFT and suppliers, and identify opportunities for continuous improvement of standards.

·       Technical Authority – Define manufacturing engineering and process requirements and make technical decisions within the area of accountability.

·       Lean / Improvement – Identify opportunities for improvement and innovation in manufacturing processes and methods. Prioritise and drive new initiatives based on business cases and promote adoption of best-in-class practices.

·       Deploy Capability (including NPI) – Ensure production readiness for new manufacturing capabilities and methods. Develop real-time, data-driven methods to capture process capability and ensure effective use across the facility and supply chain. Maintain Production Technical Packages (e.g. technical instructions, programmes, tooling) for all parts and assemblies, ensuring manufacturing processes meet requirements for quality, cost, delivery rate, and lead time.

Qualification / Experience

·       Degree in Aeronautical, Manufacturing, Mechanical, or Industrial Engineering. Candidates with an Aeronautical, Manufacturing, Mechanical, or Industrial Diploma and relevant experience will be considered.

·       Good knowledge of high-bypass gas turbine engines.

·       Good knowledge of material and component repair processes, including welding, machining, painting, and coating.

·       Strong communication, analytical, engineering, and project management skills.

·       Strong technical problem-solving skills (Six Sigma) wit

Job description

• Attend to daily production technical issues related to processes as to ensure smooth production flow
• Lead co-ordinate and execute continuous improvement in the workshop
• Attend to all quality issues and work with Quality Assurance department to resolve / contain problem using Plant Lean methodology (QRQC)
• Work closely with the Engineering and R&D departments to transit new processes/ technology and transfer into production line on time
• Embarks on productivity, quality & cost reduction program
• Drive towards company KPI (Key Performance Index) and internal PPM target
• Able to solve problems systematically through the different methodology (PDCA -TPM, QRQC, SMED & Six Sigma)
• Familiar with process improvement tools including FMEA,SPC, etc

Job requirements

• Bachelor Degree in Chemical Engineering or equivalent
• Good communication skills. Able to communicate effectively with different levels and functions
• Strong planning and organizational skills
• Assertive, result-oriented with good leadership skills

Job description

• Define the direction and scope for the production team to address customer needs and meet stakeholder expectations in a challenging environment
• Responsible for the activity and results of the production team
• Leads, motivates the team, make sure the department is appropriate in terms of staffing, competences and activity requirements
• Ensure compliance with internal procedures, including work schedules and facilities security of the entire team, and takes disciplinary measures required
• Organizes the activity of production team to achieve production targets required and ensure compliance with norms and standards (pull flow, quality, safety, etc.) in place
• Control equipment operation and reacts quickly to solve problems identified by visual control systems (deviations from standards) to reduce wasted time and products
• Ensure timely submission of suggestions by their team (LISS)
• Encourages regular suggestion submissions, defines priorities, allocates budgets accordingly and follow-up on implementation
• Pilots problem solving projects and allocates the resources required for their achievement
• Share on the company’s strategy in order for each one to understand their contribution
• Ensure compliance with internal procedures, including work schedules and facilities security of the entire team
• Ensure production standards are met which includes ensure zero balancing of chips and other clean room standards
• Ensure production quality issues are properly addressed through continuous follow up with respective engineering team to implement corrective and preventive actions

Requirements

• Bachelor Degree or Diploma in Mechanical / Chemical or equivalent
• Knowledge and respect of the Quality, Safety, Environment (Q.S.E) policy, its objectives and instructions
• Proficient in lean manufacturing tools (Kaizen board, Kamishibai, Red bin) and people empowerment tools (suggestions, flash meeting)
• Proficient in lean improvement tools (QRQC, 8D, SMED, TPM)
• Proficient in team general organization (working hours, equipment’s, standards, reporting systems)
• Proficient in Microsoft word, excel and powerpoint
• Good problem solving skill
• Good communication skill
• Good leadership skill

Job Description

Role Responsibilities:  

• Develop and maintain all methods, operating sequences, and processes in the fabrication of parts, components, subassemblies, and final assemblies 

• Work with other engineering functions to coordinate the release of product improvements and new products, and manage manufacturing engineering projects as needed 

• Lead team in using design for excellence (DFx) principles to estimate and reduce manufacturing and/or product costs, and to improve product quality 

• Determine time standards and make recommendations for tooling and process requirements 

• Develop and use test procedures, evaluate test results, and evaluate work methods, procedures, and policies   

• Determine root causes and corrective actions for issues that arise during assembly or system testing; perform Process Failure Mode & Effects Analysis; and provide reports as needed 

• Mentor and train lower-level engineers, helping to develop and update training curriculum 

• Coordinate sourcing activities with external or internal suppliers, as needed 

Minimum Qualifications:

• Bachelor’s degree

• 7-10 years of experience

• Demonstrated conceptual knowledge and technical experience for everyday problem-solving on the job   

Preferred Qualifications:

• Strong interpersonal skills—including the ability to clearly explain difficult or sensitive information, and to build consensus 

Physical Requirements:
This position may require standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools.  Additionally, because this position also may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required. 

Key Responsibilities:
• Operate a variety of manufacturing equipment, which may include , ultrasonic cleaners, tissue deflectors, or others, in the manufacturing process of medical devices - including assuring appropriate settings and parameters.

• Mix solutions, perform valve treatment process using fixtures in the appropriate measurement and sequencing, package finished product, ship for sterilization, escalate machine operations issues; Operate equipment utilizing computerized systems (e.g., EGR, semi-auto)
• Self-inspection of work output, including making basic corrections in machine set-up and placement of tools in machines

Requirements:

• Able to work on permanent morning shift, 6.30am to 3.15pm.

Key Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Requirements

• ITE/ Diploma
• Work experiences in semiconductor/ assembly/ electronics industry
• Must be able to work in a cleanroom environment
• Ability to follow standard operation procedures (written and verbal)
• Knowledge of basic hand tools
• Must be open to work Monday - Friday (4pm - 1.30am). Transport provided.

Work Location

• Tampines/ Upper Changi

Key Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Requirements

• ITE/ Diploma
• Work experiences in semiconductor/ assembly/ electronics industry
• Must be able to work in a cleanroom environment
• Ability to follow standard operation procedures (written and verbal)
• Knowledge of basic hand tools
• Must be open to work Monday - Friday (7am - 4.30am)

Work Location

• Tampines/ Upper Changi

JOBDESCRIPTION:

Mechanical Design Engineer (Manufacturing)

CoreResponsibilities

The day-to-daywork of a Mechanical Designer involves the following key phases:

-      Conceptualization & Sketching: Collaboratingwith engineers, project managers, and clients to understand productrequirements and sketching initial design concepts.

-      3D CAD Modeling (SolidWorks): Transformingconcepts into precise 3D virtual models using SolidWorks. This includesstructuring individual parts, building complex assemblies, and ensuring allcomponents fit seamlessly without interference.

-      Creating Production Drawings: Generating detailed2D engineering blueprints from 3D models. Ensuring drawings include exactdimensions, precise tolerances, surface finishes, and material specificationsrequired by machinists and fabricators.

-      Material Selection: Choosing appropriate metals,plastics, or composites based on strength, weight, thermal properties, cost,and the specific operating environment (e.g., cleanrooms or high-heatenvironments).

-      Prototyping & Testing: Working closely withthe workshop or manufacturing floor to build prototypes, testing them forstress or mechanical failure, and refining designs based on the results.

Key Skills& Requirements

TechnicalSkills

-      Spatial Awareness: Strong ability to visualizeobjects in three dimensions and understand how moving components interactwithin an assembly.

-      Manufacturing Processes: Deep understanding ofhow parts are fabricated (CNC milling, turning, sheet metal bending, 3Dprinting, and injection molding) to ensure designs are practical andcost-effective.

-      High Attention to Detail: Exceptional precisionin design and documentation; understanding that an incorrect tolerance ordecimal point can disrupt an entire production run.

Professional& Soft Skills

-      Teamwork & Collaboration: Ability to workcohesively within cross-functional teams, bridging the gap between engineering,management, and the production floor.

-      Proactivity: A self-starter mindset with theinitiative to anticipate design challenges, solve problems early, and optimizeprocesses.

-      Thriving Under Pressure: Ability to manage tightproduction deadlines, handle shifting project priorities, and maintain accuracyin a fast-paced environment.

Job Responsibilities:

• To manufacture production units to meet performance objectives with minimum supervision
• To perform simple maintenance and calibration of test means or equipment whenever necessary with the support of Test Engineering dept.
• Manage the WIP level
• Accurate reporting of any anomalies encountered during production process. Detect and alert in case of default or results deviations (even if still within the good range)
• To involve in 5S and Kaizen initiatives
• To support administrative works (Raise PR, Document Archiving Process) and production task as per assigned by team lead/supervisor

Job Requirements:

• NITEC/Diploma in Electronics Engineering
• Ability to understand and follow manufacturing/technical instructions
• Ability to operate complex test tools
• Ability to read or interpret test results

Other Information:

• Working Hours: 5 Days, Shift work may be expected
• Working Location: Changi
• 1 Year contract position

Role Responsibilities: 

• Use work orders (including schematics, wiring diagrams, parts lists, and instructions) to build, repair and/or test equipment of various kinds (electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components) 

• Perform a wide variety of electro-mechanical assembly operations, troubleshooting and repairs 

• Receive parts and perform audits to ensure all necessary parts are available; inspect parts for defects; troubleshoot and improve processes 

• Use test fixtures, electronic measurement equipment, leak detectors and/or vacuum pumps to test assemblies, subassemblies and components 

• Complete required job documentation (data entry) about progress, work expense and labor details; perform computer programming, repair or software installs, as needed 

• Work independently with minimal supervision, and serve as an informal resource for junior colleagues 

Minimum Qualifications: 

• An Associate’s degree 

• 2–4 years of semiconductor or display experience, or comparable industry or military experience

• Related technical trainings and certifications 

Preferred Qualifications: 

• Solid analytical skills, and an ability to problem-solve using established operating procedures or scientific methods 

• Demonstrated capability to operate as a peer leader and trainer

• Demonstrated proficiency for required semiconductor manufacturing concepts and processes

• ASSEET

• BSEET (DeVry, TSTC)

Physical Requirements: 
This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.  Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Primary

1. To Provide primarily support at production department.
2. Assist superiors in prepare and compile reports.
3. Prepare, generate and release job order / purchase requisition to various departments of the confirmed job orders.
4. Responsible for planning of production output, monitor machine capacity, OEE etc.
5. Work closely among inter-departments to ensure committed schedules are met.
6. Provide regular update to the sales/Projects team on project development in a timely manner.
7. Maintenance and upkeep records of Production/Engineering/Technical documents.
8. Arrange production run according to Supervisor/HOD instruction.
9. Receiving/distribution of raw material for production usage.
10. Parts distribution to other departments for next process.
11. Able to systemize and improve on workflow.
12. Good application and know-know on the ERP / reporting tools.
13. Ability to understand or interpret all technical drawing and part specification.

Education level:

1. Min. NTC/Nitec level ME/Mechatronic or its relevant.

Experience level:

1. Two (2) years in relevant experience in clerical environment or manufacturing or its relevant

2. Perform competent in clerical duties, computer literacy.

3. Result oriented, resourceful and independent.

4. Ability to read, understand mechanical drawing and Geometric Dimensioning and Tolerance.

Requirements

·      Degreeon Mechanical/Electrical/Electronic Engineering or equivalent

·      Min3 years on Semiconductor or Manufacturing Industry

·       Knowledgeable in Equipment Assemblyand Test, hands-on experience with manufacturing tools.

·       Equipment troubleshooting andmaintenance.

·       Data Analysis and Problem-solvingskills, 8D/5 Whys/FMEA/CAPA.

·       BOM management and technical drawinginterpretation skills

·       Advance Microsoft Office skills withgood communication and writing skills.

Responsibilities

·       Primarily responsible for managingECOs for both new and existing products.

·       Create and maintain mFlow, PCP, pFMEA,and Work Instructions (WI).

·       Raise internal Engineering ChangeRequests (ECR) when required.

·       Support and drive continuous processimprovement initiatives to enhance quality and efficiency.

·      Cross-functional coordination with Procurement, BDG, Planner, and Buyerand QA

·      Support and oversee FA (First Article) builds to ensure compliance withEngineering requirements.

• Review and advise if production is able to meet customer required date for new loading.
• Work with Production team to ensure that Production is executing to plan.
• Adjust production planning for any Pull In or Push out by project team Or production unable to meet schedules.
• Review and update plan to production accordingly.
• Be the window for Production and Project.
• Having effective communication with Production and Project to ensure we fully understand customers need and expectation.
• Review material readiness one week in advance before production kick off
• Work together with expeditor to drive production output as per planning.
• Devise contingency plan in case of any behind schedule scenario before updating Project.
• Update Project in advance officially for any possibility of delay with supporting reason.
• To centralize information and data via maintaining a planning master list which ownership is under Master Scheduler.
• Generate weekly GRN Report according to customers

Key Core responsibilities:

Solution Design & Technical Leadership

• Lead the design, enhancement, and governance of Manufacturing Execution System (MES) capabilities including instructions, workflows, WIP tracking, Non Conformance (NC)/QN management, data collection, and production routing.
• Define and architect integration patterns between MES and SAP Production planning (PP)/ Quality mgmt (QM)/EWM, including order Bill of Materials (BOM) download, routing, configuration, confirmation, and quality transactions.
• Provide architecture guidance for MES redesign, digital workflow refactoring, and Mfg Automations with IoT integrations such as torque tools, sensors, machine vision, and mobile apps.
• Drive technical evaluations and solution proposals for shop-floor digital transformation initiatives.

Operational Excellence & Incident Management

• Serve as senior Subject Matter Expert (SME) for complex MES–SAP production issues including order sync failures, serialization mismatches, quality record alignment, and interface defects.
• Lead root-cause analysis, stability improvements, and corrective actions across functional teams.
• Partner with global operations teams to ensure high system availability, uptime, and performance.

Program & Project Contribution

• Contribute to global large strategic programs, working along with other cross functional teams.
• Define functional requirements, technical specifications, test plans, and deployment frameworks for MES and shop-floor systems.
• Mentor junior analysts and guide cross-functional teams on best practices.

Additional responsibilities

• Serve as an  interface with multiple sub-groups within a business unit or functional areas for the purpose of business technology alignment, solution discovery, service management, project portfolio management, and relationship management.
• Architect and design complex business process/business application solutions to address cross functional needs, and convert design to functional and technical specifications. Oversee software application configuration, prepare and execute testing (unit, integration, performance, acceptance) and data conversions.  Identifies and recommend industry BKM's for integrated solution design and standards.
• Provides and/or oversees business application functional  support services to meet customer performance, availability, service level agreements and  customer satisfaction targets. Oversees monitoring of  specific IT systems or set of systems and tuning of such systems for availability and performance. Drives completion of  root cause analysis and resolution of outages or incident trends coordinating with infrastructure and technical teams, support providers and application vendors. Drives implementation of corrective and preventative actions.   Evaluates/recommends/plans life cycle for  patches, point releases, and major upgrades.
• Delivers project and support services within area of responsibility within allocated budget. Develops project budgets. Develops  understanding cost model and cost drivers for service(s) and recommend service area budgets and cost optimization activities. May be responsible for timely renewal of maintenance and subscription contracts.
• Ensures adherence to GIS project management, software application development, testing, service management, change management, RCA  and other relevant processes, standards, governance and controls.  May manage execution of sox controls and testing, and support internal and external audits. 
• Plan and manage medium to large scale  cross functional projects  to ensure effective and efficient execution in line with guardrails of scope, timeline, budget and quality.
• Oversees/manages contingent workers performing services across multiple projects or service areas.  Responsible for the selection, on boarding and off boarding of contingent workers in a timely manner. Manages contingent worker project/task assignments and ensure work product quality. Approves contingent worker time sheets/costs.

Minimum Qualifications

• Bachelor’s degree in Engineering, Computer Science, Information Systems, or related field.
• 8–12+ years of IT experience, with 5+ years in Manufacturing IT.
• Hands-on expertise with at least one MES platform (Opscenter, iOMS, Critical Manufacturing, or equivalent).
• Strong understanding of SAP PP, SAP QM, and SAP EWM manufacturing flows.
• Proven experience designing MES–SAP integrations (APIs, IDocs, BAPIs, middleware).
• Experience delivering complex technical solutions in high-mix/low-volume manufacturing.

Preferred Qualifications

• Good Business process understanding in Manufacturing Domain
• Experience implementing MES modularization, digital instructions, or multi-site MES rollouts.
• Implementation/Knowledge of ISA‑95 models for manufacturing hierarchy.
• Familiarity with IIoT, machine vision, or automation technologies.
• Experience/knowledge of Implementing AI in Manufacturing to improve productivity or solve critical problems.
• Exposure to SAP S/4 transition impacts on manufacturing execution.
• Ability to influence across global teams and drive consensus.

Work Environment

• Based in Singapore supporting global manufacturing sites.
• Requires early-morning or late-evening collaboration with US/EU/Asia teams.
• Travel to manufacturing sites may be required (TW, US, India).

Interpersonal Skills:

• Communicates difficult concepts and negotiates with others to adopt a different point of view.

Key Core responsibilities:

Solution Design & Technical Leadership

• Lead the design, enhancement, and governance of Manufacturing Execution System (MES) capabilities including instructions, workflows, WIP tracking, Non Conformance (NC)/QN management, data collection, and production routing.

• Define and architect integration patterns between MES and SAP Production planning (PP)/ Quality mgmt (QM)/EWM, including order Bill of Materials (BOM) download, routing, configuration, confirmation, and quality transactions.

• Provide architecture guidance for MES redesign, digital workflow refactoring, and Mfg Automations with IoT integrations such as torque tools, sensors, machine vision, and mobile apps.

• Drive technical evaluations and solution proposals for shop-floor digital transformation initiatives.

Operational Excellence & Incident Management

• Serve as senior Subject Matter Expert (SME) for complex MES–SAP production issues including order sync failures, serialization mismatches, quality record alignment, and interface defects.

• Lead root-cause analysis, stability improvements, and corrective actions across functional teams.

• Partner with global operations teams to ensure high system availability, uptime, and performance.

Program & Project Contribution

• Contribute to global large strategic programs, working along with other cross functional teams.

• Define functional requirements, technical specifications, test plans, and deployment frameworks for MES and shop-floor systems.

• Mentor junior analysts and guide cross-functional teams on best practices.

Additional responsibilities

• Serve as an  interface with multiple sub-groups within a business unit or functional areas for the purpose of business technology alignment, solution discovery, service management, project portfolio management, and relationship management.

• Architect and design complex business process/business application solutions to address cross functional needs, and convert design to functional and technical specifications. Oversee software application configuration, prepare and execute testing (unit, integration, performance, acceptance) and data conversions.  Identifies and recommend industry BKM's for integrated solution design and standards.

• Provides and/or oversees business application functional  support services to meet customer performance, availability, service level agreements and  customer satisfaction targets. Oversees monitoring of  specific IT systems or set of systems and tuning of such systems for availability and performance. Drives completion of  root cause analysis and resolution of outages or incident trends coordinating with infrastructure and technical teams, support providers and application vendors. Drives implementation of corrective and preventative actions.   Evaluates/recommends/plans life cycle for  patches, point releases, and major upgrades.

• Delivers project and support services within area of responsibility within allocated budget. Develops project budgets. Develops  understanding cost model and cost drivers for service(s) and recommend service area budgets and cost optimization activities. May be responsible for timely renewal of maintenance and subscription contracts.

• Ensures adherence to GIS project management, software application development, testing, service management, change management, RCA  and other relevant processes, standards, governance and controls.  May manage execution of sox controls and testing, and support internal and external audits. 

• Plan and manage medium to large scale  cross functional projects  to ensure effective and efficient execution in line with guardrails of scope, timeline, budget and quality.

• Oversees/manages contingent workers performing services across multiple projects or service areas.  Responsible for the selection, on boarding and off boarding of contingent workers in a timely manner. Manages contingent worker project/task assignments and ensure work product quality. Approves contingent worker time sheets/costs.

Minimum Qualifications

• Bachelor’s degree in Engineering, Computer Science, Information Systems, or related field.

• 8–12+ years of IT experience, with 5+ years in Manufacturing IT.

• Hands-on expertise with at least one MES platform (Opscenter, iOMS, Critical Manufacturing, or equivalent).

• Strong understanding of SAP PP, SAP QM, and SAP EWM manufacturing flows.

• Proven experience designing MES–SAP integrations (APIs, IDocs, BAPIs, middleware).

• Experience delivering complex technical solutions in high-mix/low-volume manufacturing.

Preferred Qualifications

• Good Business process understanding in Manufacturing Domain

• Experience implementing MES modularization, digital instructions, or multi-site MES rollouts.

• Implementation/Knowledge of ISA‑95 models for manufacturing hierarchy.

• Familiarity with IIoT, machine vision, or automation technologies.

• Experience/knowledge of Implementing AI in Manufacturing to improve productivity or solve critical problems.

• Exposure to SAP S/4 transition impacts on manufacturing execution.

• Ability to influence across global teams and drive consensus.

Work Environment

• Based in Singapore supporting global manufacturing sites.

• Requires early-morning or late-evening collaboration with US/EU/Asia teams.

• Travel to manufacturing sites may be required (TW, US, India).

Interpersonal Skills:

• Communicates difficult concepts and negotiates with others to adopt a different point of vi

Accounts Duties:

• Handle basic accounting duties including data entry, invoicing, and payment process
• Carry out in accounts payable and accounts receivable functions
• Maintain proper filing and documents of accounting records
• Prepare GST support documents and assist in GST submission
• Maintain journal entries, reconciliation of the general ledger matters
• Administer banking transactions including internet banking
• Ensure accuracy and the timely closure of monthly accounts
• Assist to coordinate with branch company transactions
• Assist to administer payroll related tasks
• Those with full sets account experiences will be consider with officer role

Admin Duties:

• Prepare company letters and memos
• Handle licenses & permit on government portals
• Handle staff insurance and welfare matters
• Handle submission and processing of statutory payments and claims
• Arrange and coordinate travel arrangement
• Issuance & control of company items
• Handle staff’s training matters
• Liaise with vendors on office/building/dormitory maintenance
• Prepare HR Administrative related reports / letters

• Other Accounts /HR Admin duties as assigned by superior / management

Requirement

• At least 1 year of working experience in related field
• Proficient in Microsoft Office
• Knowledge in SAP B1 accounting software will be an advantage
• Salary will commensurate based on working experience
• Able to converse and write Mandarin to manage Chinese-speaking workers
• Willing to work at Pasir Ris Loyang Industrial Estate

Job summary

1)     In charge of production planning schedule.  

2)     In charge of planning quarterly machine maintenance schedule.

3)     Ensure the cleanliness and tidiness of production floor and adhere to Good Manufacturing Practices (GMP), ISO 13485 Medical Device standard at all times.

4)     Liaise with sales to check and update production schedule and advise ETA of finished products.

5)     Based on the production plan, assign production operator to relevant machine and its target quantity.

6)     Prepare work order to production assistant and mixer to prepare the raw material according to the plan.

7)     Update completed work order quantity into the system when applicable.

8)     Generate reports for management review (productivity report, wastage report etc).

9)     Ensure sufficient stock for finished product and no out of stock issue.

10)  Liaise with raw materials vendor to achieve JIT production.

11)  Manage raw material inventory.

12)  Liaise with Freshening overseas counterpart for ordering of finished products.

13)  Liaise with technician to ensure machine spare parts are available.

14)  In charge of ordering machine parts from supplier.

15)  Supervise and manage production team (training, leave approval, personal issues).

16)  Assist in ISO, EU MDR audit and preparation.

17)  Any other area of responsibilities that the company deems necessary.

Competency requirements

1) Minimum Diploma level.

2) Microsoft Dynamics 365 Business Central proficiency will be an added advantage.

3) Communication skills.

4) Fluent in mandarin to communicate with operators.

5) At least 2 year of relevant experience.

6) Able to understand basic fundamentals of machine operations and production workflow.

7) Able to adapt to changes quickly and give clear instructions to production team.

Working Hours
Monday - Friday : 8 30am - 5 45pm (1 Hour Break)
Saturday: 8 30am - 2 30pm (1 Saturday Shift Every 4 Weeks)

Requirements

• Degree/Diploma on Mechanical/Electrical/Electronics Engineering or equivalent
• Min. 3 years of experiences in Semiconductor or Manufacturing
• Knowledge on equipment assembly and test with reference to assembly drawing and schematics.
• Trained on equipment troubleshooting and maintenance.
• Failure analysis and technical report.
• Good leadership, communication and able to work with customer on technical issues and support evaluations.

Job Responsibilities:

• Perform line setup, assembly, test, qualify and maintenance of wire bonder equipment
• Provide technical support to customer related to assembly and review drawing specification and Bill of materials.
• Conduct training and certification on technicians and work with relevant departments to achieve quality output and deliveries.
• Design/fabricate tools, jigs and fixtures and participate on continuous improvement and projects.
• Participate on MRB meetings to review non-conformance parts disposition and monitor in-process yield/reject and scrap.
• To comply on any other duties assigned by supervisor/manager.

JOB RESPONSIBILITIES

• Evaluates manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators.

• Improves manufacturing efficiency by analyzing and planning work flow, space requirements, and equipment layout.

• Completes design and development projects by training and guiding technicians.

• Develops manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing processes and solutions during project development.

• Participates in Design for Manufacturing and Assembly study with Design Engineers.

• Participates in Design Review, Design Verification, dFMEA, pFMEA and aFMEA activities.

• Design fixtures based on output of dFMEA activities.

• Perform other tasks as assigned by the supervisor.

JOB REQUIREMENTS

• Degree, MSc or PhD in Mechanical, Electrical or Biomedical Engineering.Technical Diploma with minimum 5 years in Medical Device Development.

EXPERIENCE

• At least 2 years of experience in the medical device industry including concept definition, prototype manufacturing, prototype testing and design documentation.

• Technical Diploma with minimum 5 years in Medical Device Development.

• Experience in simulation software (Abacus, CREO Simulate, etc.).

SKILLS

• Excellent command of Computer Aided Software (CREO, Solidworks or equivalent).

• Strong knowledge of technical standards (ASME, JIS, etc.).

• Competent in data analysis tools like DOE, Minitab.

• Strong command of English (Written and Oral).

• Strategic thinking.

• Resourceful and innovative.

• Independent and has the ability to work under pressure.

• Able to work cross-functionally to develop specific plan to address different challenges.

Provide technical manufacturing support to Operations and Engineering.

Key Responsibilities:
• Set-up and execute feasibility studies, experiments, and tests - both creating and following established protocols - to develop findings for the validation and improvement of equipment and manufacturing processes/methods based on engineering principles; analyze results, make recommendations, and develop reports for Engineering review. Operate a variety of test equipment to assess characteristics of the manufacturing environment
• Consult with Engineers, Technicians, and Assemblers on processes to execute experiments and/or production runs. Support related to equipment investigations, testing, objective evidence of product dispositions and rework support work necessary.
• Review documentation and take appropriate actions to ensure that information is appropriately catalogued and follow through to validation and qualification of equipment, including transferring information to appropriate locations, e.g., ECRs, SOPs, drawings, and tooling, for Engineering approval
• Utilize manufacturing software (e.g., JDE, QMS,PLM) to update documentation in systems
• Follow through with development of training and documentation materials, based on collaboration with Engineering, including identifying opportunities for modification and making recommendations, enabling the seamless knowledge transfer of project and manufacturing processes; applying knowledge of processes to devise process changes in collaboration with Engineering
• May lead projects related to new equipment validation, equipment investigations, testing, objective evidence of product dispositions and rework
• Identify potential improvement opportunities and propose solutions to optimize process and/or equipment, e.g., re-design/design of basic equipment, tools, fixtures, etc. to improve manufacturing processes, for Engineering review
• Provide coaching and guidance to technicians
• Other incidental duties (e.g. report writing and/or data collection)

Education and Experience:
• Diploma or equivalent with 3 years of previous related experience, such as GMP, clean room, medical device, and experience with automated equipment required

Additional Skills:
• Excellent computer skills required, including experience with MS Office Suite; ERP/MRP systems experience preferred
• Ability to read, comprehend, write and speak English, and good communication skills required
• Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing
• Knowledge of Good Manufacturing and Good Documentation Practices supporting a medical device environment
• Strict attention to detail
• Ability to provide feedback in a professional, direct, and tactful manner
• Must be able to work in a team environment and with minimum supervision
• Proven success adhering to project schedules and managing small projects
• Substantial knowledge of validation and improvement of automated equipment
• Ability to troubleshoot manufacturing equipment
• Knowledge of material compatibility in the proposed use environment
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control

Key Responsibilities

Financial Reporting & Compliance 

• Lead the preparation of timely and accurate monthly, quarterly, and annual financial statements in accordance with SFRS/IFRS. 

• Ensure compliance with all statutory reporting, tax filing, and regulatory requirements in Singapore and other jurisdictions as the group expands. 

• Coordinate with external auditors, tax agents, and corporate secretarial service providers. 

Management & Performance Reporting 

• Prepare consolidated management reports, including variance analysis, KPIs tracking, and commentary on financial performance against budget and forecast. 

• Develop and maintain financial dashboards to support operational decision-making by the CFO and other business leaders. 

Budgeting & Forecasting 

• Lead the annual budgeting process and quarterly rolling forecasts in collaboration with department heads. 

• Monitor actual performance against budget, identify risks and opportunities, and propose corrective actions. 

Post-Acquisition Integration 

• Support the finance integration of acquired companies, particularly those in China, ensuring alignment of accounting policies, ERP systems, and internal controls. 

• Work closely with the local finance teams in China to harmonize reporting standards and streamline consolidation. 

Internal Controls & Process Improvement 

• Enhance and document internal control procedures to safeguard company assets and ensure financial integrity. 

• Drive continuous improvement in finance processes, leveraging technology to automate and scale. 

Cash Flow & Working Capital Management 

• Monitor cash flow, treasury activities, and working capital to optimize liquidity and support operational needs. 

• Assist in managing banking relationships and financing arrangements. 

Team Leadership & Development 

• Supervise and mentor a small finance team (e.g., accountants, analysts) in Singapore. 

• Foster a culture of accountability, accuracy, and continuous learning. 

Qualifications & Experience 

• Education: Bachelor’s degree in Finance, Accounting, or related field; CPA, CA, ACCA or equivalent is strongly preferred. 

• Experience: 

• Minimum 8–10 years of progressive finance experience, with at least 3–5 years in a managerial role. 

• Prior experience in manufacturing, MedTech, CDMO, or life sciences industries is highly desirable. 

• Experience working in a private equity-backed company or exposure to M&A/post-acquisition integration is a strong plus. 

• Familiarity with cross-border operations (especially China-Singapore) is advantageous. 

• Technical Skills: 

• Strong knowledge of SFRS/IFRS and Singapore tax regulations. 

• Proficiency with ERP systems (e.g., SAP, Oracle, NetSuite) and advanced Excel. 

• Soft Skills: 

• Excellent analytical, problem-solving, and communication skills. 

• Ability to work independently and collaboratively in a dynamic environment. 

• High integrity and attention to detail. 

• Language: Fluency in English is required; Mandarin proficiency is a plus to facilitate communication with Chinese counterparts. 

Responsibilities

• Develop, implement, and maintain methods, operating sequences, and processes for the assemblies during start-up for semiconductor equipment.

• Lead the development and sustaining of field digitalized start-up procedures (iOMS) for Tier 0 & Tier 1 operations to improve efficiency and consistency.

• Allocate tasks to illustrators and oversee progress to ensure timely and high‑quality OMS & DOC deliverables.

• Manage BoM integrity across SHPK, MERG, ship-along, SRD, and other configuration sources, ensuring accuracy and alignment with product requirements.

• Drive automation initiatives to enhance work proficiency and reduce production and delivery cycle times.

• Reduce I&W (installation and warranty) costs by identifying and correcting BoM errors, improving procedures, and lowering field NCs and start-up cycle time through streamlined work processes.

• Review field NCs, analyze root causes, and work with corresponding teams develop action plans to prevent recurrence.

• Coordinate technical issues, RIT initiatives, and the introduction of new technologies and CIP projects (e.g., 3D OMS) across different business units and cross-functional teams.

• Work independently with limited documentation when needed, investigating and compiling data to recommend improvements using established reporting processes.

• Collaborate with cross-functional teams to drive complex projects related to quality issues, BoM optimization, and cost reduction.

• Interface with engineering teams to support the release of product improvements and new product instructions.

• Perform root cause analysis for issues arising during assembly and start-up phases.

• Support engineering change requests and partner with design and operations teams to implement changes efficiently for both new and existing products

Requirements

​Minimum Qualifications

• Bachelor’s degree in engineering.

• Minimum 4 years of experience working with semiconductor equipment in manufacturing or technical field service.

Technical Skills

• Hands-on experience with semiconductor process equipment; familiarity with any of the following is an advantage: MDP, EPI, ALD, CMP.

• Good understanding of mechanical, digitalization, and automation concepts, with the ability to read and interpret technical drawings and schematics.

• Good knowledge of system BoM structure, assembly processes, and procedure documentation.

• Proficiency with CAD software (e.g., SolidWorks), CAM tools (e.g., NX), SAP, and MS Office.
  

Professional Competencies

• Strong analytical and problem‑solving skills; able to evaluate information and make sound decisions.

• Ability to work effectively within standardized processes to meet objectives and deadlines.

• Excellent communication skills and the ability to collaborate with multiple stakeholders and cross-functional teams.

• Strong independent work ethic and accountability.

Other Requirements

• Able to work flexibly, including outside standard working hours, to collaborate with stakeholders across different time zones.

• Willingness to travel internationally to customer sites (approximately 10%).