Basic Qualification/ Skill required

Minimum - ITE (Electronic ) and skill is the most important qualification.

These are the scope of work if you have no experience and are willing to learn.

Will be performing initial testing, analysis and repair of PCB, and other electro-mechanical assembly.

Responsibility

1. Maintain documentation of parts condition upon arrival, during repair as well as final testing prior to shipping out repaired parts.

2. Repair populated PCB which include but not limited to digital board, analog board, RF,etc.

1. Familiar and proficient with different soldering and desoldering technique (Through hole component, smd, bga).

2. Must be familiar with at least one of the following and able to recognize main building block of : SMPS power supply, Servo amp, stepper motor driver, linear power supply.

3. Able to use oscilloscope to troubleshoot parts, power supply to provide power to board under repair, soldering, station, desoldering station, multimeter.

4. Advance skill that will be a plus point.

5.Knowledge of servo motor, encoder and servo amplifier (Sanyo)

6. Programming skill (C, python, basic, other language).

7. Arduino, Raspberry pi, or any other micro controller and sbc.

8. Understanding of reverse engineering technique as well as ability to reverse engineer a PCB, repairing without schematic availability.

Salary will be commensurate with skill and experience

5 days' work week

Immediate 1 Year Project Assignment for Singaporean to join as Network Engineer (Cisco/Fortigate) at Airport work Location

Mon to Fri Office hours 

If you have Dip in IT +2yrs network maintenance experience on Cisco & Fortigate products & seeking to work at Airport location, this is the job for you.

Remuneration: Basic + 1 month Completion Bonus + HP Claim 

Primary Purpose:

1)           Perform and ensure routine maintenance activities are carried out as scheduled.

2)           Perform OS upgrades/patching.

3)           Attend to network and system service and change request. 

4)           Provide resolution for all application and/or technical incidents and work with external support if required.

5)           Identify root cause, preventive and corrective measures for identified problems to prevent recurring incidents.

6)           Provide incident and problem reporting for all stakeholders in timely and professional manner.

7)           Assist in preparing system related documents and ISO Audit

8)           Participate in new project implementation, requirement gathering, setup & installation, testing and commissioning.  

Responsibilities:

Assist in Project Implementation and Maintenance of the Implemented System.

Our Requirements:

1)           Possess at least a Diploma or its equivalent in Computer / IT with minimum 2-3 years working experience in related field. Those with CCNA but no work experience with positive learning attitude can be considered.

2)          Ideal Candidate : 2-3 years of working experience as a Network Engineer supporting Cisco, Fortigate, Huawei product in switch, router, firewall, monitoring tools, security appliances and cablings.

3)           Trained or certified in Cisco, Fortigate products would be advantageous.

4)           Analytical, proactive and able to multi-task and prioritize all work assigned.

5)           Team player with good English communication skills who can also work independently under minimum supervision.

6)           Motivated individual with challenger spirit and leadership are strongly encouraged to apply.

7)           Exceptional troubleshooting and customer-handling skills would be advantageous.

8)           Proactive and responsive on all assigned tasks and incidents and follow up

ES Recruitment Pte Ltd

EA License No: 09C4235

EA Reg: R1103307 (Hong Mei Lin) 

Summary
Responsible for the decontamination, assembly, and sterilization of surgical instruments and medical equipment used in hospitals and day surgery centres.

Key Responsibilities:

• Decontamination checks: Receives washed instruments from wash area. Inspect for cleanliness, blood, tissue
• Functionality test: Check scissors for sharpness, artery forceps for locking, any damage instruments and power tool functions.
• Set assembly: Assemble instruments sets according to count sheet. Ensure all components are present.
• Identify and segregate damaged, rusty or faulty instruments. Tag for repair or condemn as per company policy.
• Packing technique: pack and wrap sets using approved packing material. Use correct aseptic folding techniques to maintain sterility.
• Indicators: Place internal chemical indicators inside each pack. Attach external process indicator tape with ID, date and staff name.
• Special items: Pack loaner sets, power tools, delicate microsurgical instruments per manufacturer instructions.
• Load and sterilize instruments/sets correctly. Run daily bowie dick and leak test.
• Expiry checks:  Monitor sterile stocks for expired items. Rotate stock using FIFO
• Adhere to infection control. Keep room clean at all times.
• Stock control: order and top up materials as needed.

Requirements:
Possess WSQ Higher Certificate in Healthcare Support (Sterilisation Services) or GCE N/O levels usually preferred.

1 to 3+ years of operating theatre or clinical setting experience is typically expected.

Job Responsibilities

• Lead Technical Resolution: Supervise all technical activities and troubleshooting related to all manufacturing test platforms, inspection machines, and associated peripherals (including but not limited to ICT, FCT, AXI, FP, and offline IC programming).
• Advanced Failure Analysis: Manage high-complexity equipment breakdown activities and perform root-cause analysis to provide long-term technical solutions, minimize production downtime, and directly drive improvements in MTTR and MTBF metrics.
• Continuous Improvement Implementation: Identify floor-level bottlenecks and actively execute continuous improvement projects aimed at optimizing equipment reliability, reducing repair times, and eliminating process waste to support the department's overall KPIs.
• Standardize Procedures: Maintain and update current equipment maintenance, troubleshooting, and calibration procedures and work instructions to ensure ongoing consistency.
• Regulatory & Safety: Supervise and ensure all test processes and equipment comply to regulatory and safety requirements.
• Team Supervision: Supervise, mentor, and evaluate the performance of the support team.
• Technical Skill: Overseeing the training and development programs to enhance technical skills of the team to improve the production support efficiency.
• Reporting & Communication: Attend department meetings to report on department KPIs and project status.
• Documentation Management: Review and update procedures, manuals, and troubleshooting guides to reflect current processes and equipment configurations.
• PM & Calibration Tracking: Review Schedule and track preventative maintenance and calibration activities for all test equipment.
• Inventory Monitoring: Monitor spare parts inventory and initiate procurement requests to ensure essential test components are readily available.
• 5S Compliance: Monitor 5S for all equipment on the line.
• Additional Duties: Other duties as assigned by the Supervisor or Management.

Job Requirements:

• Degree or Diploma in Electrical / Electronics Engineering or equivalent. 
• Minimum 5 years of relevant experience in related fields is preferred. 
• Preferably with good knowledge of Electronics fundamentals.
• ICT/ AXI/FP equipment support knowledge is highly preferred.
• Programming knowledge is highly preferred.
• Strong supervisory, mentoring, and leadership skills.
• Knowledge in using measuring instruments and schematic reading.
• Negotiation and vendor management skills.
• Proficient in MS Office/ Google Suite applications.

Will be part of Operation & Support Team to support Project implementation and Maintenance.

The key responsibilities are as below:

Job Description:

Project:

• Support Project Team in Project implementation
• System setup, configuration and testing
• Perform any other duties as assigned.

Maintenance:

• Perform CUAS Preventive and Corrective maintenance works at restricted Areas.
• Provide support services in operation exercise.
• Perform functional check and/or repair on testers and unit under Test.
• Perform any other duties as assigned.
• Provide technical support to resolve hardware and software related problems on network and cyber systems.

Requirements:

• NITEC / Higher NITEC / Diploma in Mechanical, Electronics or Computer Engineering
• Fresh graduate are welcome to apply
• Experience in Electronics, PCB-related, electrical & networking would be advantageous.
• Some knowledge in cyber and network systems is a plus.
• Able to work over the weekend and standby for fault call if required
• Able to interpret schematics, technical manual and drawings for maintenance works.
• Ability to use analytical skills and a "hands-on" person.
• Good interpersonal skills, proactive and work well with others.
• Possess class 3 driving license will be advantageous.

Interested candidates can click on 'Apply' or send updated resume to joreen.pak@trd.sg or victor.low@trd.sg

We are regret that only shortlisted candidates will be notify.

Depending on the allocated section (Inpatient / Outpatient / National Centre for Infectious Diseases / Quality Control/Emergency Pharmacy), you will assist the pharmacists in prescription processing, to ensure accuracy and targeted waiting times are met. You will also assist the pharmacist-in-charge in planning and facilitating pharmacy operations.

The duties include :

• Dispensing of medication
• Medication counselling
• Prescription interventions
• Inventory control
• Financial Counselling (e.g Medisave / CHAS / insurance etc)

The Requirements
- Local Polytechnic Diploma in Pharmaceutical Science OR WSQ Certificate in Healthcare Support (Pharmacy Support) OR non-SPC registrable Pharmacy Degree ONLY
- Good team player
- Possess an eye for detail
- Good communication skills
- Able to multi-task and work in a fast paced environment

- For Emergency Pharmacy, candidate must be comfortable with 2 rotating shift (PM and Night shift)

QC Technician (Lift & Escalator)

Salary: SGD 2,300 – SGD 3,010 per month

Benefits

• Handphone Allowance: SGD 35/month
• Transport Allowance: Up to SGD 280/month
• Career progression opportunities within the lift and escalator industry
• Stable working environment with ongoing training and development

Working Location

• Site-based inspections across residential, commercial, and industrial buildings in Singapore
• Office located at Kaki Bukit

Working Hours

Monday to Friday

• 8:00 AM – 5:45 PM

Job Responsibilities

• Conduct quality inspections on lift and escalator installation, modernization, and maintenance works.
• Verify compliance with company quality standards, safety requirements, and regulatory guidelines.
• Perform inspections on lift and escalator components, safety devices, and system functionality.
• Identify defects, non-conformities, and workmanship issues, and recommend corrective actions.
• Prepare inspection reports, quality records, and supporting documentation.
• Work closely with service, installation, and engineering teams to resolve quality-related issues.
• Support commissioning, testing, and handover activities when required.
• Ensure all inspection activities are carried out in accordance with workplace safety standards.

Requirements

• Minimum 2- 3 years of experience in the Lift & Escalator industry.
• Experience in maintenance, installation, testing, inspection, or related technical functions.
• Strong understanding of lift safety systems, components, and fault detection.
• Experience in QA/QC, inspection, commissioning, or auditing work will be an advantage.
• Able to read and interpret technical drawings, inspection checklists, and maintenance records.
• Good attention to detail and strong problem-solving skills.

Job Description:

• Able to do assembly and disassembly various mechanical pneumatics or hydraulics components.
• Those without relevant product experience are welcome to apply as training will be provided.
• Able to read and understand Component Maintenance Manual and drawings.
• Able to use simple measuring instrument,
• Able to complete any given task in a short time.
• Must possess knowledge of authorities’ regulations.                        
• Must Understand Human factors limitations and comply with companies’ safety and quality policy.                                                      
• Work to clearly defined procedures under day-to-day supervision and maintain 5 S in workshop areas.

Requirements:

• Must have at least 2-3 years of Aviation experience.
• Must be a team player.
• Must be able to communicate effectively with CS, Engineering and Quality dept.
• Must use clearly defined procedures to deliver results under guidance.
• ls self-motivated able to organize own time and deliver against priorities set by others.
• Must meet objectives as defined in annual appraisal.

Key Responsibilities:

1. Video Equipment Setup and Operation:

◦ Install and configure video equipment, including projectors, LED walls, cameras, and video switchers.

◦ Operate video systems during live events, broadcasts, or installations.

◦ Perform video checks to ensure proper alignment, resolution, and quality.

2. Content Management:

◦ Load, manage, and cue video content as per event requirements.

◦ Test and verify compatibility of video files with playback systems.

◦ Collaborate with clients or production teams to ensure content accuracy.

3. Troubleshooting and Maintenance:

◦ Diagnose and resolve technical issues with video equipment promptly.

◦ Conduct regular maintenance and cleaning of video systems.

◦ Repair or replace defective components to ensure operational readiness.

4. Video System Design and Integration:

◦ Assist in designing video layouts and setups for events and installations.

◦ Configure multi-screen displays and video mapping for complex setups.

◦ Collaborate with other teams to ensure seamless integration with AV systems.

5. Safety and Compliance:

◦ Follow safety protocols during installation and operation of video equipment.

◦ Ensure compliance with regulatory standards and company policies.

◦ Identify and address potential risks related to video operations.

6. Collaboration and Support:

◦ Work closely with lighting, audio, and staging teams to achieve cohesive AV solutions.

◦ Provide technical support during rehearsals and live events.

◦ Assist with the setup and teardown of video systems and other AV equipment.

7. Documentation and Reporting:

◦ Maintain records of video equipment inventory, setups, and configurations.

◦ Report on equipment usage, repairs, and replacements to management.

◦ Provide feedback for improving video workflows and systems.

Key Performance Indicators (KPIs):

• Visual quality and reliability of video outputs during events.

• Timely setup and operation of video systems.

• Minimal downtime caused by technical issues.

• Compliance with safety and operational standards.

• Client satisfaction with video performance and support.

This role is vital to delivering high-quality video experiences for Mediapro AV Pte. Ltd., ensuring smooth operations and client satisfaction in all projects.

• Reporting to Manufacturing Manager and involve actively in hands-on assembly of machines.
• Ensure that production targets are met in terms of production cost, delivery lead-time, quality and reliability of machines with proper packaging before delivery.
• To read mechanical drawing.
• Perform precision lapping and polishing process with machines.
• Comply with all workshop procedures, safety regulations, directives and work instructions.
• Liaison with other personnel on production status, engineering matters, material supply, testing and quality issues for machine rectification and improvement.
• Perform mechanical fitting job, machine assembly and maintenance, which requires knowledge of machine fits and tolerances.
• Final packaging and transportation of machines upon completion.
• Quality Control Inspection.
• Maintain proper housekeeping and 5S and to provide improvement suggestions monthly for continuous improvement.
• Other ad-hoc duty as required, including R&D projects.

Job Summary

Seeking Maintenance System Engineer to perform installation, maintenance, and troubleshooting of electronic and network systems, ensuring system uptime and client satisfaction.

Mandatory Skill-set

• ITE/Diploma/Degree in Electrical/Electronic Engineering, Infocomm, Computer Science, Mechanical Engineering, or a related field;
• Must have 2 years of experience in system implementation, maintenance, or similar technical roles;
• Must have experience in operating, upgrading, and maintaining Windows Server and Linux systems;
• Provide 24×7 hands-on installation, maintenance, and troubleshooting of end devices and central equipment, ensuring system uptime
• Strong understanding of the full software lifecycle — from deployment to maintenance;
• Excellent troubleshooting and fault analysis skills for system and network issues;
• Familiar with site installation practices, project cycles, and preventive maintenance;
• Strong communication, initiative, and problem-solving abilities;
• Knowledge of project management tools (e.g., Microsoft Project) is an advantage
• Customer-oriented with the ability to manage expectations and deliver quality support.

Desired Skill-set

• Experience with security system integration, site safety practices, and industrial standard;
• Practical knowledge in cable routing design and updating technical drawings.

Responsibilities

• Install, maintain, and troubleshoot end devices and central equipment, ensuring system uptime;
• Respond to client service requests and provide on-site support when needed;
• Prepare quotations, execute Variation Orders, and manage ad-hoc service works.
• Read construction drawings, plan cable routing, and update as-built documentation.
• Coordinate with clients, consultants, contractors, and subcontractors on installation and commissioning.
• Perform system updates, patching, and vulnerability remediation under guidance.
• Support contract administration, reporting, billing, and maintenance documentation.
• Ensure compliance with industrial standards, safety regulations, and maintain high service quality.
• Maintain strong client relationships and provide regular updates on maintenance activities.

Should you be interested in this career opportunity, please send in your updated resume to apply@sciente.com at the earliest. 

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website(https://www.sciente.com/privacy-policy). 

Confidentiality is assured, and only shortlisted candidates will be notified for interviews. 

EA Licence No. 07C5639 

[Job ID: 1632649]

Responsibilities:

• Assist in troubleshooting and repairing production systems and equipment under supervision.
• Support project documentation by preparing presentations, charts, graphics, and drawings.
• Source and requisition components and supplies; liaise with vendors on pricing and product information.
• Coordinate with external contractors on scheduled and ad-hoc maintenance activities.
• Maintain proper documentation, inventory of equipment, tools, and spare parts.
• Perform emergency and scheduled maintenance of production equipment during operations and shutdowns.
• Identify and analyze safety risks and hazards to ensure compliance with regulations and standards.
• Support the implementation and maintenance of the company’s ISO certification program.

Requirements:

• Minimum Diploma in Mechanical/Electrical Engineering or related fields.
• Minimum 2 years of experience in a plant operations environment.
• Prior experience in a supervisory or leadership capacity is an added advantage.
• Good knowledge of wiring diagrams and PLC systems.
• Proficient in Microsoft Word and Excel.
• Willing to work on weekends when required.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Felicia Chiam Kar Min
EA Personnel Reg. No.: R25152370
EA Licence No.: 07C5771 

Job Scope

• Not desk-bound, ample opportunities to move around and be exposed to different work environments & facilities
• Required to be hands-on with cleaning equipment
• Carry out daily maintenance work which may involve carpet cleaning, disinfection works, M&E works etc
• Follow an assigned schedule and perform duties at customers' sites
• Daily preparation of vehicle and equipment for assigned jobs

Job Requirements

• Training for specialized work will be provided
• Related experience in a cleaning company is preferred but not a must

Job Title: Research Technician/Assistant (Sputtering Systems)

About Us
We are an early-stage venture team developing advanced thin film materials and deposition workflow technologies for applications in optics, photonics, and memory. Our work focuses on high quality coatings and process development using sputtering-based techniques.

Role Overview
We are looking for a hands-on and reliable research technician to operate and manage our sputtering system, support day-to-day experimental work, and ensure smooth lab operations. This role is critical in enabling consistent thin film deposition for internal R&D and external projects.

Key Responsibilities
• Operate and manage a sputtering system (e.g. AJA International sputtering system) independently
• Perform thin film deposition for various projects and customer requirements
• Execute day-to-day experiments following defined process parameters and protocols
• Troubleshoot equipment issues and process deviations
• Perform basic maintenance and minor repairs, including vacuum systems (pumps, leak checks, seals), gas lines and plumbing and electrical connections and wiring
• Support process optimization and data collection
• Maintain proper documentation of experiments, parameters, and results
• Ensure safe operation of equipment and adherence to lab safety protocols

Requirements• Minimum Diploma in Engineering (Materials Science, Electrical, Mechanical, or related field)
• Prior experience operating sputtering or vacuum deposition systems is strongly preferred
• Familiarity with vacuum systems, gas handling, and thin film processes
• Hands-on experience with basic troubleshooting and maintenance
• Comfortable working with electrical systems, plumbing / gas lines, mechanical components
• Ability to work independently and take ownership of equipment and processes

Preferred Qualifications (Nice to Have)• Experience with sputtering systems or similar PVD tools
• Background in thin film characterization or materials processing
• Experience in a research lab or cleanroom environment

What We’re Looking For• Practical, hands-on problem solver
• Detail-oriented and reliable
• Able to run experiments independently
• Comfortable working in a startup environment (flexible, fast-paced)

Why Join Us• Opportunity to work on cutting-edge materials and technologies
• High ownership and impact in a growing startup
• Exposure to both research and real-world applications

Location: Singapore (SUTD campus, with potential access to shared/collaborators’ lab facilities)

We are a landscaping and horticulture firm looking for a hands-on Landscape Technician to join our team. You will carry out maintenance, planting, and horticultural works across a variety of sites in Singapore. This is an outdoor role that involves physical work in varying weather conditions, including weekend rotations.

Key responsibilities

• Carry out routine maintenance such as mowing, pruning, trimming, and weeding
• Plant, transplant, and care for trees, shrubs, turf, and ornamental plants
• Apply fertilisers, pesticides, and soil treatments in accordance with safety guidelines
• Inspect plants for signs of disease or pest infestation and take corrective action
• Operate and maintain landscaping tools and equipment
• Follow project schedules and site-specific requirements
• Comply with WSH regulations and safe work procedures at all times

Requirements

• Minimum NITEC in Horticulture or related qualification from a recognised local institution
• 1 to 3 years of relevant landscaping or horticultural work experience
• Able to work outdoors and perform physical tasks in all weather conditions
• Willing to work on weekends and public holidays on a rostered basis
• Team player with a responsible and positive attitude

What we offer

• Competitive salary commensurate with experience
• Performance bonus
• On-the-job training and career development opportunities
• Stable and supportive team environment

·  Troubleshoot equipment related problems

·  Carry out preventive maintenance according to service procedures

·  To perform repair task that includes parts replacement, overhaul of equipment, upgrading of equipments

·  To ensure that all works comply with quality and safety procedures

·  Perform ad hoc assignments such as training support when required

Mon to Fri 8.30am to 5pm
Location: Woodlands
Manufacturing Office environment

With AWS & Bonus

Job Description

• Repair of Customer Returns
• Act as the primary coordinator for customer return parts, including repair, evaluation, and disposition.
• Receive, log, and track returned parts from customers for repair service or investigation.
• Coordinate with internal teams (QA, Engineering, Production, Repair Service) to ensure timely repair, rework, or analysis.
• Communicate repair scope, lead time, and status updates to customers clearly and professionally.
• Ensure parts repair in our factory or customer site meet quality requirements.
• Work with the manufacturing team and get hands on training so as in order to repair returns or on-site.
• Coordinate and support rework activities for customer returned parts in accordance with approved instructions.
• Ensure rework is performed only after proper review and authorization.
• Verify that reworked parts comply with applicable workmanship, quality, and customer specifications.
• Arrange final inspection, documentation, and release prior to shipment back to customer.

Requirement

• Nitec/Higher Nitec
• No experience required as training will be provided

Only shortlisted candidates will be notified

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at emily.fong@atomrecruit.com

Emily Fong
Senior Talent Specialist 

Atomrecruit Pte. Ltd. 

MOM EA License No.: 15C7443 

EA Personnel Reg No.: R1768368

Job Specifications

1.    To manage the preparation and use of practical resources, chiefly within the chemistry lab, but may occasionally include biology and physics labs:

• providing assistance and advice in meeting the practical needs of the chemistry curriculum related to the GCE O-level practical exam, as well as other school assessments and lab curriculum and activities;

• liaising with teaching staff on the requirements and schedule of lessons;

• preparing of resources and assemble lab apparatus;

• organizing and maintaining the preparatory room;

• giving technical advice to teachers and students;

• assisting teaching staff and students in practical classes & carrying out demonstrations.

2.    To work closely with the senior lab technician to ensure the maintenance of a safe working environment in the science labs and preparatory room through:

• carrying out risk assessments for technician activities;

• contributing to the assessment, monitoring and review of safety procedures and resources;

• keeping up to date with current procedures and practices through continuing professional development;

• provision of technical advice and support on safety issues to teaching;

• safe treatment & disposal of used materials including hazardous substances and responding to actual or potential hazards;

• safe storage and accessibility of equipment and materials;

• organising, storing and checking the condition of chemicals and equipment.

3.    Any other duties as required by the Head of Science, Senior Lab Technician or the school.

Requirements and Qualifications

• Possess a Diploma in Chemical Processes / Applied Sciences

• At least 2 years of relevant experience in school labs

• A person of integrity with a positive and enthusiastic outlook

• A good team player
  

Disclaimer

The above statements are intended to describe the general scope and level of responsibilities associated with this role. They should not be interpreted as an exhaustive list of duties, responsibilities, or skills required. Staff may be assigned additional tasks outside their usual responsibilities as and when necessary.

Working hours are 7:15 am to 4:15 pm

Only shortlisted candidates will be notified.

Applicants who have previously applied need not reapply.

We are looking for Veterinary Technicians to join us in our clinic that specialises in cats.

Relevant certification is required.

No certification, but relevant veterinary assistant experience may also apply.

There will be 3 months probation. Full time / Locum positions available.

Position is open to Singaporeans, PR and Malaysians.

Responsibilities:

• Conduct on-site assessments to determine the best location for installation based on plumbing, electrical, and space requirements.
• Communicate effectively with customers to explain the installation process, answer questions, and address concerns.
• Install home appliances according to manufacturer specifications and industry standards, including filtration units.
• Connect home appliance to existing plumbing lines, faucets, and electrical outlets as needed.
• Test installed systems to ensure proper functioning.
• Provide demonstrations to customers on how to use and maintain their systems effectively.
• Troubleshoot and resolve any issues or malfunctions with installed systems in a timely manner.
• Maintain accurate records of installations, including parts used, labor hours, and customer information.
• Coordinate with sales and customer service teams to schedule installations and ensure customer satisfaction.
  
  Requirements:
• Outstanding customer service and communication skills.
• Ability to work independently with minimal supervision and as part of a team.
• Valid driver's license and clean driving record.
• Willingness to work flexible hours, including evenings and weekends, to accommodate customer schedules.

Depending on the allocated section (Inpatient / Outpatient / National Centre for Infectious Diseases / Quality Control/Emergency Pharmacy), you will assist the pharmacists in prescription processing, to ensure accuracy and targeted waiting times are met. You will also assist the pharmacist-in-charge in planning and facilitating pharmacy operations.

The duties include :

• Dispensing of medication
• Medication counselling
• Prescription interventions
• Inventory control
• Financial Counselling (e.g Medisave / CHAS / insurance etc)

The Requirements
- Local Polytechnic Diploma in Pharmaceutical Science OR WSQ Certificate in Healthcare Support (Pharmacy Support) OR non-SPC registrable Pharmacy Degree ONLY
- Good team player
- Possess an eye for detail
- Good communication skills
- Able to multi-task and work in a fast paced environment

- For Emergency Pharmacy, candidate must be comfortable with 2 rotating shift (PM and Night shift)

A technician is

a skilled professional responsible for installing, maintaining, repairing, and troubleshooting technical systems, machinery, or software

. They apply specialized technical knowledge and practical skills to ensure equipment operates efficiently, often collaborating with engineers to meet safety and performance standards.

designs, develops, tests, and supervises the manufacturing or installation of electrical equipment, components, and systems for commercial, industrial, or utility use

. They apply principles of electromagnetism and physics to create systems for power generation, distribution, and machinery. Core tasks include CAD design, cost estimation, and safety compliance.

Company Overview

Globstat Technologies designs and builds products for ultra-clean, static-free environments, serving industries like hard disk drives, semiconductors, pharmaceuticals, food processing, and biotech. Their products include clean booths, benches, air showers, pass boxes, and safety guarding.

Job Summary

You will support production by finishing machine-cut parts, assisting CNC machinists, maintaining equipment, and ensuring quality and safety standards are met in a cleanroom manufacturing environment.

Responsibilities

• Finish parts cut by machines to meet production quantity requirements before delivery
• Assist CNC machinists in completing unfinished products to ensure smooth workflow
• Maintain safe operations by following established safety procedures and regulations
• Perform preventive maintenance on equipment according to manufacturer instructions to reduce downtime
• Troubleshoot equipment malfunctions and coordinate repairs promptly to maintain production continuity
• Document production activities, quality checks, and any irregularities in logs to ensure accurate records
• Communicate shift actions, issues, and ongoing needs to maintain continuity between work shifts
• Interpret technical drawings to support accurate product finishing and assembly
• Apply electrical knowledge to support equipment maintenance and troubleshooting

Preferred competencies and qualifications

• Demonstrate teamwork by collaborating effectively with colleagues to meet production goals
• Maintain a positive and proactive working attitude to contribute to a productive work environment

Other Information

Work Schedule

• Monday to Friday, 8:00 AM to 5:30 PM

Aircon technician is responsible for installing, maintaining and repairing various types of aircon equipment (Eg. Wall-mounted aircon sets, Cassette units, Ceiling Suspended units, Window units, Daikin VRV systems and Mitsubishi VRF systems)

Responsibilities:

• Installing new equipment and machinery
• Installing the necessary components of an air conditioning systems such as the compressor, condenser and evaporator
• Maintenance on air conditioning systems to ensure they are functioning properly
• Inspecting and testing equipment to diagnose problems and determine necessary repairs
• Repairing or replacing defective parts, such as motors, belts, gears, and electrical components
• Troubleshooting and repairing complex machinery, such as hydraulic and pneumatic systems
• Maintaining accurate records of maintenance and repair work performed
• Collaborating with other technicians and engineers to identify and resolve equipment issues
• Following safety procedures and regulations to ensure a safe working environment
• Keeping up-to-date with new technologies and techniques in the field of maintenance and repair
• Providing technical support to customers or clients
• Able to type report of findings into system.
• Any other tasks or duties assigned by the Company

Job Requirements

• Min. 2 years of related work experience
• NITEC or equivalent
• Singapore Class 3 Driving Licence.
• Able to carry heavy loads, read and interpret technical manuals and schematics
• Strong understanding of mechanical, electrical, and hydraulic systems
• Strong analytical and problem-solving skills
• Able to work independently and a team player with excellent interpersonal and communication skills
• 5.5 days work week

Other Requirements:

- Only Singaporeans.

- Need to communicate with Chinese speaking customers.