Total 35 job vacancies in Singapore

SIA Engineering is recruiting a number of positions for our Singapore Operations located in Changi ( East side of the island ).

Available roles include the following :

1. Aircraft Technicians ( B1 )
2. Avionics Technicians ( B2 )

Requirements :

• Applicants who applied for the above role must have experienced in similar role(s) in other companies.
• Must have relevant Engineering qualifications
• Must have necessary supporting documents/certifications to prove qualifications
• Willing to work in Singapore
• Ability to speak and write in English language is compulsory
• Immediately available candidates are welcomed

Shortlisted candidates would be contacted for an online interview.

At SIA Engineering, we are committed to ensuring your personal information is protected and never misused. Personal data collected will be used or disclosed only for the purposes of your job application and potential employment with SIA Engineering, such as for assessing and evaluating your suitability for employment in any current or prospective position within the organization and verifying your identity and accuracy of the personal details and other information provided.

By submitting your application for this position, you consent to:

A) The collection, use and disclosure of your personal data by SIA Engineering for the purposes of your application and potential employment with SIA Engineering, including disclosing such personal data to any of SIA Engineering’s subsidiaries, affiliates or related corporations (if necessary for the processing of your job application); and

B) SIA Engineering’s retention of your personal data for 1 year for consideration of future job opportunities (where applicable)

Responsibilities:

• Responsible to lead in the investigation of Bench/Equipment failures.

• Responsible for the setting-up of means and tools required for multiple pilot, repair and production lines with adequate support from the Central Engineering Team.

• You will be responsible to conduct and support the necessary interfaces, technical negotiation, follow up on supplier realisation and managing of installation.

• Play an active role in the specification and localizing of test benches and tools as well as establishing the necessary maintenance strategies and contracts.

• Required to lead and propose improvement and investment plans.

• Responsible for implementation and maintain cybersecurity rules on the test benches and means.

• Contributes to establish standards, procedures and guidance helpful to the Operation.

• Participate in migration process of benches on the industrial network, backup policy and is the entry point for cybersecurity incident response and actions deployment on industrial means.

Requirements:

• Degree/Diploma in Electrical, Electronic Engineering

• Knowledge in Cybersecurity network implementation on test benches and means will be an advantage.

• Industrial experience in high technology production, especially in new equipment setup and repair environment is an added advantage

• Min 3-5 years of Equipment engineering experience with some Project Management experience is an added advantage

• Understanding of engineering drawings, schematics, tool/bench drawings and other technical documents Knowledge in RF or Test Software Engineering, TPM, implementing and utilizing GR&R for equipment performance/trending is an added advantage

• Hands on experience with installation and commissioning of equipment/tools

• Ability to lead, recommend and implement best practices and improvements to ensure a high level of quality and consistency

• Ability to work in a system-software integrated test bench environment

• Able to support shift work (Afternoon shift & night shift & weekend shift)

Other information:

• Working Location: Changi

• Working Hours: Monday - Friday, 9am - 6pm

• Able to support shift work (Afternoon shift & night shift & weekend shift)

Duties and Responsibilities

▪ Coordinate servicing, inspection, repair and maintenance of equipment, plant, and facilities to ensure minimum downtime

▪ Plan and organize Weekly and Daily Preventive Maintenance (PM) Program

▪ Responsible for the performance and discipline of the technicians on shift duty

▪ Coordinate minor and major repairs, replacement & overhaul of equipment, plant, and facilities at component & system level, to ensure minimum disruption to operations

▪ Ensure quick response to trouble-shoot, rectify, and re-activate equipment, plant, and facilities. If unable, to organize recovery to workshop to repair, rectify and make good, and put back into operation with minimum delays and downtime.

▪ Verify the accuracy of computer daily job sheets and time keeping

▪ Monitor and review work methods, conditions, and housekeeping to ensure safe working environment

▪ Verify and ensure workshop equipment are maintained in good working condition

▪ Verify parts for replacement are beyond economic repair (BER) and cannot be reconditioned

▪ Any other duties as assigned

▪ Ensure compliance with all workplace safety, security, and health policies and procedure

▪ Perform any ad-hoc duties as assigned by the reporting manager or department head

Requirements

▪ Minimum Vocational/ITE certificate or equivalent in Building Maintenance

▪ Experience in servicing, inspection, repair and maintenance of equipment, plant and facilities will be an added advantage

▪ Must possess minimum LTA class 3 driving license

Job Responsibilities:

· Troubleshoot and repair of hydraulic and electrical system for Aircraft Tow Tractors, GPU (Ground Power Unit), ACU

(Air Conditioning Unit), ASU (Air Starter Unit), etc.

· Ensure preventive maintenance is carried out properly in accordance with approved documents.

· Ensure proper and accurate details filled up and signed off on job card and task sheets upon completion of work.

· Ensure equipment is in working/serviceable condition before releasing to user.

· Perform modification on electrical wiring as necessary with approved documents or data as per OEM

recommendation.

Job Requirements:

· Minimum NiTEC/Diploma in Automotive Engineering or equivalent.

· At least 1 years of working experience in Automotive industries.

· Comfortable with shift work arrangement.

· Candidate with LTA Class 3/4/5 license will have added advantage.

· Monday to Thursday, 0800 to 1730 hour, Friday, 0800 to 1700.

Summary
The Maintenance Technician I/II is responsible for repairing and maintaining work at Technical Services to ensure high equipment availability and reliability with safety and optimum cost.

Duties And Responsibilities

• Carry out servicing, inspection, repair& maintenance of vehicle & equipment

• Carry out tasks as assigned by Supervisor

• Learn all type of operational check and tasking on all type of equipment for PM

• Input spares/parts required into Workshop Parts Request online form

• Ensure spare replacement is authorized

• Lead by example and demonstrate good work practices to junior technicians

• Follow safety policies, practices, administration etc. Compliance & enforcement

• Key in detailed completed task into SAP in an orderly and timely manner
  Requirements

• Minimum NITEC / Higher NITEC in Motor Vehicle / Mechatronic or Diesel Mechanic

• Preferably with relevant working experience and knowledge in Mechanical, Electrical/Electronic & Pneumatic

• Must possess minimum LTA Class 3 driving license and above

Quality Department

Reporting to: Quality Engineer

CyrusTechnology started in 2005 with the vision to approach polymeric tooling designin unconventional methods and providing manufacturing solutions to exactingspecifications for ultra-precision and complex moulding.  We pride ourselves as a valued partner to ourclients, offering expertise at every stage of the product design tomanufacturing, to transform market opportunity ideas to a marketable product.  With the progress we achieved so far, we aimto continue to push boundaries and overcome constraints to be a leader in the industry.

About the Job

Quality Department plays a very important role in Cyrus. Youwill be working closely with NPI Quality Engineer on testing samples and builds. 

Your key responsibilities are asfollows:

-       ConductFirst Articla Inspection (FAI), Process Capability/ Process Capability Index (CP/CPK)measurements on moulded parts.

-       Confirmsamples submission from engineering for moulding validation.

-       Identifythe appropriate measurement method and create measurement work instructions.

-       TrainQC inspectors in measurement methodology.

-       Verifytool changes and process dimensions after tool modifications / rectifications.

Your areas of knowledge andexpertise that matter most for this role:

·       Aminimum of 2 years’ experience in similar role (preferably in Plastic InjectionMoulding Industry).

·       Experiencein using QC inspection tools such as Coordinate Measuring Machine (CMM), SmartScope etc

·       Basiccomputer and Microsoft Office knowledge and skills

·       Good work attitude & interpersonalcommunication skills

·       Self-motivated with a good learning

·       Able to work independently and in teams.

·       Able to interpret mechanical drawings andbasic knowledge of Geometric Dimensioning and Tolerancing (GD&T).

·       Detail oriented for data accuracy.

Job Description

Key Responsibilities 

• Assists Tool owner in planning the daily work schedule within assigned territory to ensure completion of Preventive Maintenance and remedial maintenance. 

• Uses escalation policies as required to keep management informed of down situations. 

• Performs daily, weekly, monthly, quarterly, bi-annual, and annual periodic maintenance on systems within established time frames. Also performs wet cleans as required. Work together with fellow Amat Process personnels in the operation and maintenance of systems. Troubleshoots and corrects process variations on systems partially with assistance from senior engineers. 

• Assist in start-up, retrofit and relevant CIPs. Provides technical assistance to less experienced Applied personnel when required. Uses training and experience to identify some process related system problems. 

• Develops and implements plans to increase productivity. Tracks equipment performance and plan uptime improvement. Preferably possess a working knowledge of Statistical Process Control, Quality Improvement Process methods, Risk Assessment and semiconductor industry terminology. 

• Plans and executes support activities on a wide range of Applied Materials' systems. May need technical assistance in performance of daily responsibilities. 

Requirements

• ITE/ Diploma in Engineering or relevant studies

• Basic understanding on semiconductor process/ equipment is preferred

• Past experiences in handling AMAT equipment will be an added advantage

• Must be able to commit normal work hours (non-shift) from Monday - Friday in the beginning and open to change to shift work at a later stage
  

  Work Location

  • Fusionopolis

SIA Engineering Company (SIAEC) is Asia’s foremost Maintenance, Repair and Overhaul (MRO) provider. With certifications from more than 20 airworthiness authorities, SIAEC’s global MRO network, including six hangars in Singapore and three hangars in Philippines, delivers turn-key integrated solutions to a large client base of international airlines and aerospace companies.

2023 & 2022 “Singapore’s Best Employers” by The Straits Times and Statista

2022 “Asia MRO of the year – Airframe” by Aviation Week Network

2022 & 2021 “Asia-Pacific MRO of the Year” by Airline Economics magazine

Responsibilities:

• Performs aircraft sheet metal layout and template.
• Repair and modifies aircraft structural parts and repairs composite materials.
• Manufacture and repair non-in stock structural parts.
• Performs metal forming operation.
• Be able to interpret basic drawings and blueprint.
• Identify aircraft major and minor defects and prepared type of repair required.
• Fabricates related sheet metal and assemblies.
• Performs and replace plastic aircraft enclosure.

Requirements:

• Minimum 2 years of relevant experience in structural repair for aircraft
• Relevant educational qualifications in Engineering field
• Willing to work in Singapore
• Ability to converse and write in English

At SIA Engineering, we are committed to ensuring your personal information is protected and never misused. Personal data collected will be used or disclosed only for the purposes of your job application and potential employment with SIA Engineering, such as for assessing and evaluating your suitability for employment in any current or prospective position within the organization and verifying your identity and accuracy of the personal details and other information provided.

By submitting your application for this position, you consent to:

a) the collection, use and disclosure of your personal data by SIA Engineering for the purposes of your application and potential employment with SIA Engineering, including disclosing such personal data to any of SIA Engineering’s subsidiaries, affiliates or related corporations (if necessary for the processing of your job application); and

b) SIA Engineering’s retention of your personal data for 1 year for consideration of future job opportunities (where applicable)

Job Details

• Maintenance and servicing of avionics systems per customer's requirements.
• Carry out component changes.
• Assist engineers in trouble-shooting and rectification
• Assist in installing and servicing avionics communications equipment.
• Inspect and test the electrical and computer systems that allow aircraft to function.
• Oversee airplane's radar system, radio communications equipment and the flight controls.
• Removal, assemble and install electrical components, and keep detailed written records of repair work performed on aircraft. (E.g. Main Battery, Emergency Battery, Starter Generator, ACW Generator, GCU, BPCU, etc.)
• Removal and installation of engine and propeller electronic controls.
• Performs components changes, tests, and adjustments on aircraft electrical avionics systems consistent with the quality standards.

Job Requirements

• Minimum O level and above, with at least 1 year of working experience as an avionics technician in the aviation industry
• Good team member with strong interpersonal skills.
• Mechanically and electrically trained on Avionics systems

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported revenue of over $12b in 2025 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Best-in-Class Asia Pacific Index

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Responsibilities

·       Perform the task of cleaning aircraft interior and exterior parts during periodic overhauls (home interior maintenance).

·       Maintaining the interior cleanliness in the aircraft

·       Changes lighting systems and repairing entertainment systems, seat electrical systems.

·       Comprehensive knowledge of aircraft cleaning operations and activities as well as facility maintenance

·       Perform the task of removing and cleaning curtains, discarding waste from the seats, and adjusting bulkheads

·       Ability to perform the given tasks in high noise areas and at great heights

·       Maintenance and repairing of aircraft cabins

·       Maintain luggage storage area in a neat and organized manner

·       Maintain inventory items required for handling the cleaning activities.

·       Install cabin interior components into commercial aircraft including seat tracks, overhead bins, galleys, side panels, bulkheads.

·       Maintain the quality of the aircraft interiors on the operated fleet.

·       Maintain the interior and exterior cleaning standards on the operate fleet.

Job Requirements

• Minimum Diploma in engineering, preferably in Aerospace or relevant certificates.
• At least 2 years of working experience in the aviation industry
• Mechanically and electrically trained (maintenance)

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported revenue of over $12b in 2025 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Best-in-Class Asia Pacific Index

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Key Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Requirements

• ITE/ Diploma
• Work experiences in semiconductor/ assembly/ electronics industry
• Must be able to work in a cleanroom environment
• Ability to follow standard operation procedures (written and verbal)
• Knowledge of basic hand tools
• Must be open to work Monday - Friday (4pm - 1.30am). Transport provided.

Work Location

• Tampines/ Upper Changi

Key Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Requirements

• ITE/ Diploma
• Work experiences in semiconductor/ assembly/ electronics industry
• Must be able to work in a cleanroom environment
• Ability to follow standard operation procedures (written and verbal)
• Knowledge of basic hand tools
• Must be open to work Monday - Friday (7am - 4.30am)

Work Location

• Tampines/ Upper Changi

Job Responsibilities

·       Perform the task of cleaning aircraft interior and exterior parts during periodic overhauls (home interior maintenance).

·       Maintaining the interior cleanliness in the aircraft

·       Changes lighting systems and repairing entertainment systems, seat electrical systems.

·       Comprehensive knowledge of aircraft cleaning operations and activities as well as facility maintenance

·       Perform the task of removing and cleaning curtains, discarding waste from the seats, and adjusting bulkheads

·       Ability to perform the given tasks in high noise areas and at great heights

·       Maintenance and repairing of aircraft cabins

·       Maintain luggage storage area in a neat and organized manner

·       Maintain inventory items required for handling the cleaning activities.

·       Install cabin interior components into commercial aircraft including seat tracks, overhead bins, galleys, side panels, bulkheads, etc.

·       Maintain the quality of the aircraft interiors on the operated fleet.

·       Maintain the interior and exterior cleaning standards on the operate fleet.

Job Requirements

• Minimum Diploma in engineering, preferably in Aerospace or relevant certificates.
• At least 2 years of working experience in the aviation industry
• Mechanically and electrically trained (maintenance)

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported revenue of over $12b in 2025 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Best-in-Class Asia Pacific Index

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Description

• Performs removal, installation, servicing , operational test and troubleshooting of aircraft system in mechanical trade
• Performs and documents all work performed per appropriate manuals and regulations as required

Requirement

• O level and above, with at least 2 year of relevant experience in the aerospace industry
• Ability to read mechanical engineering drawings
• Ability to effectively communicate in both written and verbal form on individual and / or aircraft status

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported revenue of over $12b in 2025 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Best-in-Class Asia Pacific Index

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Details

• Maintenance and servicing of avionics systems per customer's requirements.
• Carry out component changes.
• Assist engineers in trouble-shooting and rectification
• Assist in installing and servicing avionics communications equipment.
• Inspect and test the electrical and computer systems that allow aircraft to function.
• Oversee airplane's radar system, radio communications equipment and the flight controls.
• Removal, assemble and install electrical components, and keep detailed written records of repair work performed on aircraft. (E.g. Main Battery, Emergency Battery, Starter Generator, ACW Generator, GCU, BPCU, etc.)
• Removal and installation of engine and propeller electronic controls.
• Performs components changes, tests, and adjustments on aircraft electrical avionics systems consistent with the quality standards.

Job Requirements

• Minimum O level and above, with at least 3 year of working experience as an avionics technician in the aviation industry
• Good team member with strong interpersonal skills.
• Mechanically and electrically trained on Avionics systems

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported revenue of over $12b in 2025 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Best-in-Class Asia Pacific Index

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Summary

The CMM Technician is responsible for developing, validating, and executing Coordinate Measuring Machine (CMM) inspection programs to ensure product quality and dimensional compliance. This role supports First Article Inspection (FAI), in-process, and final inspections while working closely with Production, Engineering, and Quality teams to maintain high manufacturing standards.

Key Responsibilities

• Develop, create, and validate CMM programs (online and offline) for complex precision components.
• Perform First Article Inspection (FAI), in-process inspections, and final dimensional inspections using CMM equipment.
• Interpret engineering drawings, specifications, and GD&T requirements to establish appropriate measurement strategies and inspection methods.
• Troubleshoot CMM programming issues and resolve measurement discrepancies.
• Analyze inspection results and generate detailed dimensional inspection reports.
• Ensure compliance with quality standards, customer requirements, and internal procedures.
• Maintain accurate documentation, including CMM programs, inspection reports, calibration records, and quality documentation for traceability.
• Support continuous improvement initiatives related to inspection processes and measurement techniques.
• Collaborate with Engineering, Production, and Quality teams to address dimensional and quality-related issues.
• Ensure proper care and maintenance of CMM equipment and inspection tools.

Requirements

• Diploma, Higher NITEC, or Degree in Mechanical Engineering, Precision Engineering, Manufacturing Engineering, or a related discipline.
• Minimum 1–3 years of experience in CMM operation and inspection within a precision engineering, machining, or manufacturing environment.
• Fresh graduates with relevant training or internship experience may also be considered.
• Good knowledge of GD&T (Geometric Dimensioning & Tolerancing) and engineering drawing interpretation is required.
• Experience with CMM software such as PC-DMIS is an added advantage.
• Familiarity with precision measurement instruments and quality inspection processes.
• Strong attention to detail and analytical skills.
• Able to work independently with minimal supervision while being an effective team player.
• Good written and verbal communication skills.
• Able to communicate effectively with internal and external stakeholders in a multicultural work environment.
• Willing to work at Changi North Crescent.

Job Description

• Performs removal, installation, servicing , operational test and troubleshooting of aircraft system in mechanical trade
• Performs and documents all work performed per appropriate manuals and regulations as required

Requirement

• O level and above, with at least 1 year of relevant experience in the aerospace industry
• Ability to read mechanical engineering drawings
• Ability to effectively communicate in both written and verbal form on individual and / or aircraft status

ST Engineering is a global technology, defense and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported revenue of over $12b in 2025 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Best-in-Class Asia Pacific Index

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Responsibilities:

• Performing proper repairs of all unserviceable equipment for which he/she has been trained or assigned to perform and acting also as a technical resource in analysis of failures when required.

• Performing proper tests, repairs and modifications of unserviceable equipment in compliance with Thales Solutions Asia Quality programs as well as relevant procedures issued by Industrial Quality dept or the ARU Manager.

• Respecting the TAT target as given by the ARU Manager for all repair and/or modification activities.

• Maintenance and calibration of test means or equipment whenever necessary with the support of M&T dept.

• Maintaining an up to date knowledge of the product worked on with relevant technical documentation like SBs, SILs, TIs and updates of the CMM.

• Ensures the On-Time delivery of repairs and Quality of repairs

• Contributes to continuous improvement actions

Job Requirements:

• Higher Nitec/Diploma in Electronics Engineering

• Possess strong knowledge of analog and digital electronics.

• Competent in the use of in-depth diagnostic theory and technique.

Other Information:

• Working Location: Changi

• May be required to work in shifts.

Key Responsibilities

Performs complex electro-mechanical technical functions and activities such as design, test, checkout, fabrication, modification, troubleshooting and assembly of electronics and electro-mechanical systems, experimental design circuitry, prototype models, specialized test equipment, tools and test fixtures.

Tests and troubleshoots system level and component level problems in electrical and mechanical systems and sub-systems with minimal supervision.  Assignments require solution of difficult problems by application of technical knowledge.  May perform more complicated or complex new system and NPI installations and field upgrades.

May work from limited or no documentation.  Investigates, compiles data, documents and recommends changes using applicable reporting process to enhance product performance.

Compiles logbooks and test procedures documentation utilizing good writing skills.  Assists in revising, developing and implementing documented procedures.  Writes complex technical reports and test procedures.

Performs mechanical, electrical, pneumatic & vacuum and process testing on AMAT platforms to Engineering and Manufacturing documentation and specifications.

Observes all safety standards.  Maintains a secure, safe, clean and healthy work environment.  Attends required health and safety training and follows safety and security policies, procedures and practices.  Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept.  Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly.  Actively strives to prevent accidents and injuries.

Requires full understanding of the company's manufacturing and/or engineering processes, as well as excellent interpersonal and communication skills to effectively interface across departmental/functional lines.  Provides management with technical input in order to correct problems both at the system level and in the manufacturing process.

Provides training to lower level Engineering Technicians.  Recognized as technical resource for a particular platform or product.  Highly proficient at troubleshooting and resolving issues.  Effective at providing standard work and workmanship skills training.  Works closely with Engineering in the development of procedures and documentation for NPI.  May serve as a "Quality Lead".

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed advanced specialized expertise within a analytical/scientific area to perform the most complex work

Business Expertise

• Has a good understanding of how related teams coordinate their efforts and resources to achieve objectives

Leadership

• May act as a lead for the team, may allocate work and provide subject matter guidance to more junior team members

Problem Solving

• Exercises judgment, based on previous experience, practices and precedents, to identify and solve problems that arise with little or no precedent

Impact

• Impacts the effectiveness of own team and closely related teams

Interpersonal Skills

• Exchanges ideas and information effectively; uses tact and diplomacy when dealing with others

Role Responsibilities: 

• Use work orders (including schematics, wiring diagrams, parts lists, and instructions) to build, repair and/or test equipment of various kinds (electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components) 

• Perform a wide variety of electro-mechanical assembly operations, troubleshooting and repairs 

• Receive parts and perform audits to ensure all necessary parts are available; inspect parts for defects; troubleshoot and improve processes 

• Use test fixtures, electronic measurement equipment, leak detectors and/or vacuum pumps to test assemblies, subassemblies and components 

• Complete required job documentation (data entry) about progress, work expense and labor details; perform computer programming, repair or software installs, as needed 

• Work independently with minimal supervision, and serve as an informal resource for junior colleagues 

Minimum Qualifications: 

• An Associate’s degree 

• 2–4 years of semiconductor or display experience, or comparable industry or military experience

• Related technical trainings and certifications 

Preferred Qualifications: 

• Solid analytical skills, and an ability to problem-solve using established operating procedures or scientific methods 

• Demonstrated capability to operate as a peer leader and trainer

• Demonstrated proficiency for required semiconductor manufacturing concepts and processes

• ASSEET

• BSEET (DeVry, TSTC)

Physical Requirements: 
This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.  Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Singapore Training & Flight Services Campus is hiring a Technician for flight simulator maintenance.

Responsibilities:

- Perform pre-flight checks

- Perform preventive and corrective maintenance on Full Flight Simulators (FFS) and Flight Training Devices (FTD).

- Perform training device updates (software and hardware)

- Ensure documentation procedures are completed

- Provide total customer support service, that include accompanying customers through instructor station and during training operation

- Perform QTG run

- Able to troubleshoot, diagnose and repair hardware/software failures down to the component level

- Basic knowledge on motion (MOOG) and visual systems (EP8000/8100)

- Able to work on height

Competencies and Skills:

- Technical Expertise: Has knowledge of, and can demonstrate technical and practical skills, enabling effective decision-making

- Collaboration: Undertakes team assignments with other technicians

- Communication: Good written and verbal skills

- Customer Focus: Anticipates and responds to changing customer requirements and expectations

- Enterprise/Resourcefulness: Flexibility - able to adapt in different environments

Applications for this position will be accepted until May. 14, 2026

Export Control Requirements:

This is not an Export Control position.

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

Shift Worker (Singapore)

Equal Opportunity Employer:

We are an equal opportunity employer. We do not accept unlawful discrimination in our recruitment or employment practices on any grounds including but not limited to; race, color, ethnicity, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military and veteran status, or other characteristics covered by applicable law.

We have teams in more than 65 countries, and each person plays a role in helping us become one of the world’s most innovative, diverse and inclusive companies. We are proud members of the Valuable 500  and welcome applications from candidates with disabilities. Applicants are encouraged to share with our recruitment team any accommodations required during the recruitment process. Accommodations may include but are not limited to: conducting interviews in accessible locations that accommodate mobility needs, encouraging candidates to bring and use any existing assistive technology such as screen readers and offering flexible interview formats such as virtual or phone interviews.

• General electrical fitting work including installation of electrical equipment, electrical cabling works, cable trucking, cable conduit and termination, etc
• Maintenance of M&E equipment
• Troubleshooting of electrical system
• Troubleshooting and repair works for air conditioning system (Single Split, Multi Split & VRV)
• Installation of air conditioning system
• On-site maintenance of Air-con and MV system
• Preparation of service reports
• Attending urgent calls during & after office hours
• Any duties as assigned by supervisor

JOB REQUIREMENTS

• Minimum 2 years hand-on experience in maintenance, troubleshooting and installation in electrical systems
• Must be able to install GI trunking and conduits works.
• Minimum 2 years hand-on experience in maintenance, troubleshooting and repair works in ACMV system
• Must have knowledge of Air-con DX system and Chilled water system.
• MUST have Coretrade certificate.
• Basic maintenance knowledge of M&E systems.
• Valid class 3 driving licence is preferred.
• Working location: Island-wide Singapore
• Working hours: Monday to Saturday (8:30 am to 5:30 pm)

Job Summary

This role involves overseeing the laboratory’s accreditation and quality management system through equipment calibration and management, facility monitoring, assisting with quality assurance and control procedures to ensure and maintain the validity of test results. The responsibilities under this role will include performing quality assessments, maintain documentation, and assist in resolving quality-related issues.

This is a 1-year contract role.

Key responsibilities:

Environment Monitoring

Monitor laboratory conditions to ensure optimal testing environments and compliance with safety and environmental regulations, reporting any non-conformities.

Equipment Management

Commission and decommission standard lab equipment, conduct routine inspections, maintenance, and calibration, ensure equipment meets calibration standards, and assist in troubleshooting performance, accuracy issues and liaising with external service providers

Proficiency Test

Support inter- and intra-laboratory proficiency testing programs

Documentation & Traceability

Maintain accurate, up-to-date, and accessible detail records of equipment inventory, calibration certificates, maintenance activities and facilities monitoring

QAQC Process Flow

Assist in implementing quality assurance and control procedures, prepare for internal audits and address non-conformities, and support maintaining ISO 17025 accreditation while adhering to stringent QHSSE and technical requirements.

Continuous Improvement Initiatives

Participate in continuous improvement initiatives and provide feedback on potential improvements to laboratory processes.

Requirements:

• Diploma - relevant Engineering or Quality discipline, or equivalent in experience

• Minimum 3 years working experience

• Prior experience in ISO17025 accredited lab (desirable)

• Prior work experience in Geotechnical or construction materials laboratory and performing tests (desirable)

• Good numeracy and literacy

• Working knowledge of maths, statistics, functions, and geometry

• Eye for detail, diligent in following procedures and record-keeping

• Electronics technical skill (Desirable)

• Proficient in use of MS Office applications

What Fugro offers

• Competitive salary with Annual Wage Supplement

• Generous paid leave

• Career & training opportunities (international opportunities possible)

• Company shuttle from various pick-up at MRT stations across Singapore

• Collective health insurance and outpatient benefits.

• Employee Assistance Programme (EAP) to provide help when you need extra support.

• Additional benefits: Long Service Awards, Professional Membership, Weekly fitness-related activities, etc.)

**Benefits may vary according to position/contract/grade level.

Here's how to apply:

• Please include your latest resume in the application.

• Please describe your working rights in Singapore (work pass sponsorship is subject to quota and availability).

• We regret to inform that we will only process applications made via our Careers website (and other linked portals) and only shortlisted applicants will be contacted.

Job Summary

You will install, configure, and maintain IT hardware and software, monitor network systems, troubleshoot issues, and support technology integration to ensure smooth and secure company operations.

Responsibilities

• Install, configure, and maintain computer hardware, software, and peripheral devices to ensure operational efficiency
• Monitor and maintain company network systems including LAN/WAN, routers, switches, and Wi-Fi access points for optimal connectivity
• Perform preventive maintenance on IT and operational technology equipment to minimize downtime
• Troubleshoot hardware, software, and network-related issues to restore system functionality promptly
• Provide technical support to internal users through onsite and remote assistance to resolve IT problems
• Assist in system upgrades, data backups, and implementation of data security measures to protect company information
• Maintain accurate documentation of system configurations, asset inventory, and maintenance records for compliance and tracking
• Support technology integration across operations, production, and office systems to enhance workflow efficiency
• Coordinate with vendors for equipment servicing and IT-related purchases to ensure timely and cost-effective solutions
• Ensure compliance with company IT policies and safety standards to maintain a secure IT environment

Requirements

• Diploma or Degree in Information Technology, Industrial Technology, or related fields
• Knowledge in computer assembly, troubleshooting, and maintenance to support hardware lifecycle
• Basic understanding of networking concepts such as TCP/IP, IP configuration, routers, and switches for network management
• Familiarity with Windows OS, Microsoft Office, and basic server concepts to support daily IT operations
• Knowledge of CCTV, access control, or system integration to assist in security and operational technology
• Strong problem-solving and analytical skills to diagnose and resolve technical issues effectively
• Good communication and teamwork abilities to collaborate with colleagues and vendors

Job Summary

You will maintain mechanical equipment and facilities to support manufacturing in a safe environment, perform planned and unplanned maintenance, assist contractor oversight, and participate in technical and safety activities.

Responsibilities

• Maintain mechanical equipment and facilities to ensure safe and sanitary manufacturing operations
• Complete planned and unplanned mechanical maintenance and repairs on pumps, tanks, piping, valves, and related equipment
• Monitor and coordinate work performed by outside contractors to ensure compliance and quality
• Diagnose faults and repair plant systems and equipment to minimize downtime
• Participate in risk assessments as part of Permit to Work preparation to ensure safety compliance
• Interpret technical drawings and prepare detailed reports on maintenance and repair work completed
• Perform minor piping fabrication and modifications to support plant operations
• Maintain machine shop tools and equipment, including welding sets, tooling, and lifting gear, to ensure readiness
• Support equipment inspections with vendor representatives on tanks, columns, pipelines, and centrifuges
• Rebuild valves, pumps, gearboxes, and drives to restore equipment functionality
• Conduct predictive maintenance activities such as vibration monitoring and infra-red thermography to prevent failures
• Complete all required in-house training promptly to maintain skills and compliance
• Adhere to and comply with Safety, Health, and Environmental (SHE) rules to maintain a safe workplace
• Liaise with stakeholders to ensure proper implementation of maintenance works and services
• Perform special projects and other duties as assigned by the Supervisor

Preferred competencies and qualifications

• Possess at least a NITEC in Mechanical Engineering, Diploma, Advanced/Higher/Graduate Diploma, or equivalent
• Class 3 driving license is an advantage but not essential
• Ability to work 44 hours per week
• Experience in equipment maintenance within water, wastewater treatment, or chemical process industries is highly preferred
• Entry-level candidates are welcomed to apply