Total 119 job vacancies in Singapore

CINTRA is a French-Singaporean joint research laboratory, a CNRS International Research Laboratory under the French Ministry of Higher Education and Research. It is a collaboration between the French National Centre for Scientific Research (CNRS), Nanyang Technological University (NTU) and Thales, bringing together researchers and students from France and Singapore. The research focus of this joint laboratory is towards the development of innovative nanotechnologies and nanomaterials for various electronic and photonic applications. 

For more details, please view https://www.ntu.edu.sg/cintra.

We are seeking to hire a candidate to support the project on cooling technology for power electronics.

Key Responsibilities:

• Develop materials with high capacity and thermal conductivity

• Design and fabricate prototype of cooling device for power electronics

• Modeling and evaluation of the prototype

Job Requirements:

• Bachelor's degree in Mechanical Engineering or a related field

• Experience in thermal management and cooling technologies for electronic systems is preferred

• Prior research experience in power electronics cooling, thermal management systems, or advanced materials will be an advantage

• Good written and verbal communication skills.

• Ability to work independently and collaboratively in a multidisciplinary research environment.

We regret to inform that only shortlisted candidates will be notified.

Job Responsibilities

Production Conditions and Standardization:

• Develop and uphold technical standards, work standards, Failure Modes and Effects Analysis (FMEA), and control plans.
• Manage tasks related to establishing and standardizing production conditions for FCBGA manufacturing.

Product Yield and Quality Stability:

• Oversee tasks aimed at improving product yield and maintaining quality stability.

Process Optimization:

• Set-up and optimize conditions for Automated Optical Inspection (AOI) processes for new product introduction and continuous improvement in mass production.

Yield Improvement:

• Conduct activities focused on investigating and implementing measures to improve yield and standardize these improvements.

Productivity Enhancement:

• Engage in activities to enhance productivity through standardization, review of work procedures, and automation of process checks.

Process Equipment Evaluation:

• Set up and evaluate AOI process equipment.

Inspection and Measurement Equipment Evaluation:

• Establish and evaluate equipment used for inspection, measurement, and analysis in the production process.

Process Change Management:

• Handle requests for process changes and manage their implementation.

Roadmap Verification and Implementation:

• Verify and implement roadmaps, including the verification of design rules and integration of new materials.

Customer Technical Meetings:

• Manage and conduct technical meetings with customers to address and resolve technical issues and inquiries

Perform any other ad-hoc duties as assigned by the Manager, as required to support the team and organizational goals.

Job Requirements

Professional Qualifications:

• Degree in Engineering or Science.
• Experience in substrate, PCB and semiconductor processes or production engineering is an advantage.
• Fresh graduates or candidates with 2–3 years of relevant experience are welcome.

Specialized Knowledge & Skills:

• Preferably with PCB manufacturing process background.
• Good knowledge in AOI/Metrology process.
• Experience in managing quality and productivity in production environments (preferred).
• Familiarity with measurement, analysis, and reliability evaluation tools (preferred).
• Basic understanding of substrate manufacturing processes (preferred).
• Good understanding of macro or programming is advantage

Competencies:

• Strong attention to detail and ability to work with precision.
• Excellent listening skills with the capacity to understand and address customer needs.
• Proficient in project management, with the ability to effectively plan and execute projects.

The Division of Information Technology and Operations Management at Nanyang Business School is inviting applications for a Research Assistant or Associate (RA) position. The role is expected to begin in June 2026 or thereafter.

Job Responsibilities:

• The RA is expected to plan, organize and implement research projects, in collaboration with the principal investigators. The successful candidate will work closely with professionals in the field of AI, technology and medicine.

• Conduct literature reviews, coordinate schedules for data collection with survey and interview participants

• Assist in data collection, data transcription and analysis

• Contribute to the dissemination of research findings

Job requirements:

• Minimally a bachelor’s degree in a related field

• Excellent oral and written communication skills is required

• Able to work independently and meet deadlines

• Experience with qualitative methods and data analysis

We regret to inform that only shortlisted candidates will be notified.

Company Overview

We are an AI-driven technology company developing a smart learning platform that uses structured educational content, data, and AI tools to provide personalized learning support and improve student performance.

Job Summary

We seek Part-Time Knowledge Management Specialists to organize, classify, and structure educational content focused on Primary Mathematics. This role suits detail-oriented candidates comfortable with digital tools and interested in education, Mathematics, data, or AI.

Responsibilities

• Organize and classify educational content to support the development of a smart learning platform
• Review content for accuracy and consistency following structured guidelines
• Input data accurately into digital systems and spreadsheets to maintain content integrity
• Manage and check spreadsheets to ensure data quality and correctness
• Apply time management skills to meet deadlines and complete tasks independently after training
• Learn and adapt to internal guidelines and processes to improve content management efficiency
• Maintain a responsible and proactive attitude toward assigned tasks and continuous learning

Preferred competencies and qualifications

• Experience in tutoring, teaching, classroom support, or other education-related roles
• Familiarity with the Singapore Primary School Mathematics syllabus to enhance content relevance
• Experience in content management, data entry, tagging, categorization, or administrative checking
• Interest in AI, educational technology, online learning platforms, or structured data work
• Candidates awaiting university admission or currently pursuing further studies are encouraged to apply, subject to availability and suitability

Job Responsibilities

Automation &Smart Warehouse

• Integrate IoT, RFID, vision AI, and AGVs/AMRs with enterprise systems.
• Support automation projects: e-lockers, pick-to-light, robotic arms, ensuringdata sync and reliability.
• Design secure IT/OT segmentation for remote monitoring and maintenance.
• Collaborate with vendors and integrators for interoperability and performance.

Application & Full-Stack Development

• Lead design and development of supply-chain apps: dashboards, asset tracking, workflows.
• Deliver IT solutions using modern stacks (React, Angular, Node.js, .NET,Python).
• Architect API integration across WMS, ERP, and automation subsystems.
• Manage CI/CD pipelines, Docker, Kubernetes, and cloud deployments.
• Evaluate low-code platforms (OutSystems, PowerApps) for rapid prototyping.

Digital Architecture & Strategy

• Maintain architecture across logistics, warehouse, and transport, bridging IT/OT/automation.
• Align tech roadmap with standards, data strategy, and business goals.
• Design hybrid-cloud using VCF, Azure, Data Factory, and API Management forinteroperability.
• Establish IT/OT governance and cybersecurity frameworks (ISO27001, SOC2, IM8).

Data & Analytics

• Build pipelines and event-driven architecture for Synapse, Power BI, and AIdashboards.
• Deliver analytics on throughput, fleet use, and automation uptime.
• Ensure data governance, consistency, and system integration.

Leadership & Collaboration

• Act as liaison across IT, Strategy, Ops Tech, Cybersecurity, and business units.
• Lead architecture reviews, PoCs, and vendor evaluations for automation tech.
• Mentor teams on coding standards, integration design, and secure deployment.
• Undertake assigned projects or duties as directed by Management.

Job Requirements

• Software Engineering Leadership: Leads agile teams in building cloud-native andfull-stack applications.
• Strong intercommunication and social skills
• Positive and keen learner, team player
• Strong leadership and management skills, with the ability to motivate and develop a team.
• Excellent communication and interpersonal skills, with the ability to build strongrelationships with internal and external stakeholders.
• A Good team player that is willing to share ideas and work with fellow colleaguesto complete tasks within a team

Professional Qualifications & Relevant Experience

• Bachelor’s in Computer Science, Software Engineering, Information Systems, or related field (Master’s preferred).
• 7-10 years’ experience in IT architecture and software development; 
• Proven track record designing and integrating systems such as WMS, OMS, SAP, CMS and IoT/automation platforms.
• Familiar with PLC/WES/WCS, industrial communication protocols (Modbus, MQTT, OPC UA), and robotics integration.
• Cloud experience (Azure/AWS), containerisation, API security.
• Strong hands-on skills in .NET Core, Node.js, Java Spring, Python, React/Angular, REST/GraphQL APIs.
• Knowledge of data analytics and visualisation tools (Power BI, Tableau) for supply chain KPIs.
• Certifications (ITIL, Azure Architect, CISSP) are advantages.
• Good Project Management knowledge

Interested applicants, please Email, fabianling@recruitexpress.com.sg

Fabian Ling Tuong Liing

R25129353

Recruit Express Pte Ltd

EA Licence No: 99C4599

We regret that only shortlisted candidates will be contacted.

We are seeking an innovative and technically skilled researcher to join our team, specializing in adaptive machining. is a key technology for generative and regenerative applications at the heart of ARTC’s remanufacturing and manufacturing research. We are looking for people with the passion and drive to join us as part of the Remanufacturing Process Technology (RPT) Group. The scope of the role will be to work on research in advancing machining technologies by integrating adaptive techniques, leveraging knowledge in CNC machining, CAD/CAM programming, software development, and basic Artificial Intelligence (AI) concepts. This role provides an exciting opportunity to contribute to cutting-edge research aimed at improving efficiency, precision, and sustainability in machining processes.

Responsibilities:

• Perform research, conduct experimental work and analysis in a project-based environment
• Lead / Support the technical execution and delivery of projects, including project scoping activities and industrial customer engagement as well as capability development in line with the technical roadmap of the Group and Division, fostering collaboration with other teams / groups / research entities as needed
• Conduct research on adaptive machining techniques, including automated decision-making systems, dynamic process adjustments, toolpath optimization, scanning and data gathering technologies, and machine to machine communication.
• Algorithm Development: Design, develop, and implement algorithms for 3D data analysis for feature recognition and machining strategy selection for automatic tool path generation, and adaptive machining. Collaborate with cross-functional teams to integrate these algorithms into existing machining systems.
• Data Analysis: Analyse large datasets generated from machining operations to identify patterns, anomalies, and optimization opportunities. Develop predictive models to optimize machining parameters and improve overall efficiency.
• Documentation and Reporting: Prepare technical reports, documentation, and presentations to communicate research findings, project progress, and recommendations to stakeholders. Publish research papers in relevant journals and present findings at conferences and seminars.
• Technical Innovation Culture: Mentor and coach interns, fostering a culture of technical innovation and excellence.
• Any other ad-hoc work for the team, Group, Organisation and A*STAR with possible secondary roles

Job Requirements:

• At least a Bachelor’s Degree in in Mechanical Engineering, Manufacturing Engineering, Computer Science, or a related field.
• Prior experience of CNC machining, familiarity with machining processes and equipment, knowledge of machine communication (OPC-UA, TCP/IP) is advantageous.
• Proficiency in CAD/CAM/CAE software, preferably in Siemens NX / Solidworks / PowerMill
• Proficiency and/or knowledge in programming languages such as Python, VB.Net, C#, C++, MatLab, etc.
• Preferably with experience working in an industry-driven R&D environment
• Fluency in English with good written, spoken and comprehension skills
• Ability to communicate, interact and work professionally in a collaborative environment as a team player
• Ability to work in a dynamic fast-paced environment in an agile manner to adapt to fast-changing requirements of internal and external stakeholders
• Ability to think critically and is problem-solving oriented
• Ability to work effectively and independently
• Ability to demonstrate high level of initiative to learn and adapt new technologies to stay relevant

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Overview

The National Institute of Education (NIE) is among the world’s top education institutes, recognised for its excellence in teacher education and educational research.  NIE has played a key and pivotal role in shaping and developing Singapore’s teaching profession and landscape through evidence-informed, practice-focused and values-based programmes and initiatives.

An autonomous institute situated within the research-intensive Nanyang Technological University, NIE is consistently ranked within the top 10 in the world for research impact in the field of Education.

The Natural Sciences and Science Education(NSSE) Department at the NIE in Singapore is seeking an Assistant Professor/Associate Professor in Design& Technology (D&T) education (and its related fields) to join its NSSE Department. The Natural Sciences and Science Education (NSSE) at the National Institute of Education in Singapore is committed to discovery and innovation in sciences and science education. Comprising faculty from both science content and pedagogical disciplines, we adopt an interdisciplinary approach to teaching and research. Our science education researchers focus mainly on maximising the potential of every child through research on students' learning approaches and problem-solving skills, and work with teachers to develop models of creative teaching and new approaches to learning. Faculty members receive research support through internal and external grants, as well as access to world-class research facilities.

Requirements

Successful candidates must have:

·      A Bachelor degree in Science/Arts/Engineering and a doctoral degree (PhD) in education (specialising in D&T e.g., product design, mechanical, or related)

·      Published in top-tier, peer-reviewed international education journals, and be able to teach in English

·      Teaching qualifications, and it is desirable to have taught at secondary level for at least 5 years and have leadership experience in school

·      Post-doctoral research experience, prior experience in conducting professional development courses for teachers, and conducting research in multilingual and multicultural environments are desirable

·      Received competitive research grants to support their scholarly work

·      In addition, Associate Professors should have: (a) sustained, independent, and international academic reputation; (b) published in high-impact venues; (c) secured major research grants; and (d) received teaching awards.

Responsibilities

Successful candidates will be expected to:

·       Design, teach and grade a range of pre-service and in-service courses in D&T Education, and graduate-level courses in D&T Education.

·       Supervise undergraduate and pre-service students in teaching practicum attachments and projects

·       Supervise Master’s and Doctoral students and perform examination duties for graduate students’ theses/dissertation, seminar, and oral examinations

·       Serve on committees in the Department, NIE and NTU and offer consultancy and professional services to schools, the Ministry of Education and other public education-related organisations on a request basis

·       Develop research programmes aligned to their areas of specialisation and publish in top-tier, peer-reviewed international education journals

·      In addition, Associate Professors will be expected to lead in key areas of research within the department, mentor junior faculty members, supervise graduate students and serve in programme leadership.

Application

Please submit your application together with the following through: https://ntu.wd3.myworkdayjobs.com/Careers/job/NTU-Main-Campus-Singapore/Assistant-Professor-Associate-Professor-in-Design---Technology-Education--NSSE---NIE-_R00024689

1.    A cover letter outlining suitability for the position.

2.    A detailed curriculum vitae, including qualifications, teaching experience, research achievements, full publication list (annotate authorship e.g., lead author and quality of journal e.g., Impact Factor), and academic service.

3.    Three sample publications in D&T Education

4.    Research Impact Statement (up to 5 pages)

Applicants should demonstrate the significance and impact of their research by addressing the following:

·        Keycontributions: What are your most important research impacts to date?

·        Evidence of impact: How has your work influenced the field, policy, and/or practice? Provide evidence (e.g., publications, citations, policy uptake, industry adoption).

·        Academic impact: How has your work advanced theory, methods, and/or knowledge?

·        Societal/Policy/Industry Impact (where applicable):Describe influence on policy, regulation, industry standards, or broader society.

·        Research identity: What distinguishes your work? Articulate a clear and coherent research trajectory.

·        Contributions and Leadership: Clarify your role in collaborative projects.

·        Future impact: Outline how your research will shape the field over the next 5-10 years.

5.  Teaching Impact Statement (up to 3 pages)

Applicants should demonstrate their impact on student learning and education by addressing the following:

·      How have you enhanced student learning and engagement?

·      What teaching innovations or improvements you have implemented and why?

·      How have you promoted interdisciplinary thinking?

·      How have you incorporated experiential and collaborative learning?

·      How have you contributed to a positive teaching culture?

·      How have you harnessed emerging technologies (such as AI) in your teaching?

Applicants are encouraged to provide evidence to support their claims.

Closing Date

The closing date for application is 30th June 2026

Other Information

More information on NSSE can be found at https://www.ntu.edu.sg/nie/about-us/academic-departments/natural-sciences-and-science-education  

For enquiries, interested applicants may write to Associate Professor Teo Tang Wee, Head of NSSE at tangwee.teo@nie.edu.sg copied to Ms Val Lee, at lilian.lee@nie.edu.sg.

Note to applicants

Only successful candidates will be notified (via email).

Responsibilities:

1. Responsible for the architecture design, core module development, and continuous iterative optimization of the game client to ensure high performance and stability.

2. Deeply research cutting-edge AI tools and technologies, applying them practically to project R&D to drive quality and development efficiency.

3. Lead the formulation of front-end development workflows, coding standards, and technical specifications to establish efficient team collaboration.

4. Lead core technical troubleshooting to resolve critical front-end technical challenges and performance bottlenecks.

Qualifications:

1. Bachelor’s degree or above in Computer Science or related fields; proficient in Unity3D.

2. 3+ years of experience in mobile/mini-game client development; experience successfully leading a game project from 0 to 1 is highly preferred.

3. Passionate about technical research, with a strong ability to explore and implement new technologies.

4. Passionate about gaming with a strong product mindset; ability to approach technical execution from a player experience and product perspective is a major plus.

5. Excellent communication and coordination skills, with a strong sense of responsibility and self-drive.

6. Due to work pass regulatory restrictions, this position is currently open to Singapore Citizens (SC) and Permanent Residents (PR) only.

• HR Operations: Maintenance of employees' data, preparation of employment documents, employee disciplinary matters, employees' queries, management of full set of work passes in construction sector and preparation of weekly/monthly HR reports (Info-Tech Software).

• Talent Acquisition: Manage the end-to-end recruitment process including advertising, shortlisting, interviewing, and onboarding.

• Learning and Development: Work with department heads to arrange employees for training (CSOC, BCSS, Work at Height and etc.)

• Claim Management: Submission of necessary claims, including but not limited to insurance, work injury and statutory claims.

• Compensation and Benefits: Preparation of salary proposals, support the annual appraisal process

• Employee Engagement: Plan and organise employee engagement activities and/or events.

• Payroll: Manage payroll process (Using Info-tech System), preparation of payroll reports

• Administration: Oversee dormitory and housing renewals, and manage the assignment and registration of new workers into dormitories. Coordinate festive purchases, catering bookings, and other related arrangements.

• Any other ad-hoc duties as assigned

Accounts Duties

• Handle the full set of accounts, including general ledger, month-end and year-end closing activities.
• Process purchases, staff reimbursements, and payments to vendors (Accounts Payable).
• Issue invoices, credit notes, preform receipts, and follow up on outstanding payments from customers (Accounts Receivable).
• Perform bank reconciliations and maintain accurate accounting records.
• Assist with CPF submissions, GST filings, and regulatory compliance requirements.
• Prepare monthly management accounts, financial statements, and periodic schedules for management review.
• Liaise with banks and other external stakeholders as required.

Administrative Duties

• Provide administrative support for HR matters, including work pass applications and renewals, IR21 tax clearance submissions, employee insurance administration, and maintenance of personnel records.
• Manage general office administration, including document filing, correspondence, and office supplies.
• Perform other ad hoc accounting and administrative duties as assigned by management.

Responsibilities:

• To ensure loading and unloading of products in a safe and secured manner.

• Responsible for the vehicle condition, cleanliness and maintenance.

• Pick/Send workers, Deliver items to clients or businesses punctually while adhering to traffic laws and road safety regulations. 

• Assist in loading and unloading items from vehicles, contributing to efficient distribution operations for timely deliveries. 

• Plan delivery routes and uphold accurate delivery records. 

• Verify orders before delivery and undertake additional tasks as directed by supervisors.

• Any other ad hoc duties as assigned by management from time to time.

Requirements:

• Possess a valid Singapore Class 3 or Class 4 Driving License

• Good working knowledge of appropriate geographical areas and good map reading ability, able to use digital apps / GPS

• Applicable for Singaporean & Permanent Resident only.

• Preferred at least 2 years working experience in related field is required for this position.

Responsibilities:

• Define design verification test plans, analyze device performance, and provide feedback for design improvement.
• Perform detailed characterization of active and passive integrated photonic devices on the chip-level and wafer-level.
• Develop programs for data post-processing.      
• Participate in projects for the development of next-generation products.
• Manage a team of engineers in daily responsibilities

Requirements:

• Minimum Master's degree in electrical engineering, optical engineering or semiconductor physics.
• Experience in Project Management
• Hands-on experience in characterization of active and passive integrated photonic devices, including various OO, EO, and OE measurements at DC and AC levels.
• Experience in test setup development and maintenance, and equipment resourcing.
• Experience in guided-wave optical device working principles.
• Experience in managing a team.

Part time intern needed to do on site survey.

must commit minimum 2 to 4 weeks

working hours: 830am to 6pm.

Working days: 5 days per week.

Committement: Not needed

salary: $1200 to 1500 per month

Do not need any experience as we will train you

Kindly whatsapp Jay at 87928898 / wa.me/6587928898

Kindly whatsapp Jay at 87928898 / wa.me/6587928898

Hi,

We need house inspector / surveyor for HDB / CONDO / LANDED properties for www.uncledefect.sg.

We will guide and train you.

Salary will be $120 cash per day.

Kindly whatsapp Jay at 87928898 / wa.me/6587928898

Thank you

www.uncledefect.sg

We need house inspector / surveyor for HDB / CONDO / LANDED properties for www.uncledefect.sg.

Job Summary

A leading Multinational Corporation (MNC) headquartered in Taiwan is establishing a new factory in Singapore. We are seeking an experienced Recruitment & Compliance Specialist who will be responsible to manage end-to-end recruitment for local and foreign hires, administer all work passes/visas, ensure full MOM compliance, and lead orientation/onboarding.

JobDescription

1.     Responsible for the availability, performance optimization, and continuous delivery of the pharmaceutical collaboration SaaS platform hosted on AWS.

2.     Handle operational incidents and requests, continuously improving operational service capabilities through effective solutions, covering day-to-day operations, storage, networking, databases, and middleware.

3.     Stay updated with new public cloud operation technologies and drive their adoption to enhance overall operational efficiency and capabilities.

4.     Write and maintain infrastructure operations documentation, including technical documents in both English and Chinese.

Collaborate with global teams, using both Chinese and English for technical communication, issue alignment, and reporting.

Who are we looking for?

Someone with
1.      3+ years of hands-on Linux system operationsexperience.

2.     Familiar with SaaS platform architecture; experience in small to medium-scale cluster operations is a plus.

3.     Proficient in capacity planning, architecture design, performance tuning, andoperations automation.

4.     Experienced with EKS, messaging and caching middleware (e.g., Redis, Kafka); hands-on experience with AWS public cloud services (EC2, S3, VPC, etc.) is preferred.

5.     Basic database operations capability – familiar with relational databases such as MySQL/PostgreSQL, able to work with development teams on backup &recovery, slow query analysis, high availability configuration, and other common database operational tasks.

6.     Proficient in at least one scripting or programming language (Shell, Python,Go); DevOps experience is a plus.

7.     Strong communication awareness, service orientation, sense of responsibility, proactiveness, and team spirit.

Fluent in both English and Chinese; excellent written and spoken communication skills in both languages, able to write technical documents, participate in technical meetings, and collaborate with overseas teams in English.

JOB SUMMARY:

Assistant Process Engineer with process engineering experience to join VTFS Engineering team. The candidate in this position will assist with process engineers which enables the features of future generations of products. They apply manufacturing, engineering, and technological principles to the development of new equipment, procedures, and processes.

MAIN DUTIES AND RESPONSIBILTIES
1.   Assist the engineer with process development

2.   Assist the engineer with new product development

3.   Assist the engineer with cost calculation and cost down

4.   Assist the engineer with project management

5.  Communication with customers and suppliers

6. Deal with SAP and NCC system

COMPETENCIES/ JOB SPECIFICATIONS
1.   Investigation, equipment, process and material development for new concepts and advanced technology

2.   Able to understand productivity and industrial knowledge

3.   Knowledge on ISO Standards

4.   Demands broad technical strengths, together with excellent communication and organizational skills

5. Work ability of materials (Metals, alloys, ceramics, etc)

MINIMUM QUALIFICATION AND WORK EXPERIENCEREQUIRED
1.   Candidate must possess at least bachelor’s degree/Polytechnic Diploma/Professional Degree in Chemistry/Materials Engineering or equivalent

2.   Fresh graduates are welcomed

3.   Understand SAP and NCC system (BOM, Part number, Process flow)

4. Proficiency in Excel

Responsibilities:

• Manage full-cycle recruitment process
• Maintain and update employee records and HR databases
• Verify attendance records, any deductions prior to payroll submission.
• Maintain and update employee leave records in HR systems and ensure compliance with company policies and local employment laws.
• Facilitate onboarding processes for new employees including document collection
• Prepare HR-related documents such as employment contracts and letters
• Support initiatives to enhance employee welfare and engagement activities.
• Handle offboarding activities such as clearance and issuance of relevant letters.
• Assist in scheduling interviews and managing hiring calendars
• Support HR audits, surveys, and government reporting when required.

Requirements:

• Bachelor’s Degree in business or similar discipline
• Minimum 2 years of HR and administrative experience, with experience in semiconductor/manufacturing industry preferred
• Knowledge of employment laws, regulations, and HR best practices
• Meticulous with strong attention to details and accuracy in handling sensitive employee information
• Strong interpersonal and communication skills
• Ability to maintain confidentiality and handle sensitive matters with discretion
• Organizational and multitasking abilities to manage various HR functions simultaneously
• Problem-solving skills to address employee concerns and HR challenges

Key Responsibilities

·        Cable Installation: Pulling, laying, and securing various types of cables (fiber optic, Cat6,Cat6a, etc.) within conduits, trays, and other cable management systems.

·        Cable Termination: Assisting with the termination of cables at both ends, including patch panels, keystone jacks, and equipment.

·        Cable Testing: Supporting the testing of installed cables using tools like cable testers to ensure proper connectivity and performance.

·        Cable Labeling: Labeling cables according to project specifications for easy identification.

·        Site Preparation: Preparing and maintaining the work site, including organizing tools and materials.

·        Safety Compliance: Following all safety protocols and wearing appropriate personal protective equipment (PPE).

·        Assisting Skilled Technicians: Providing general support to technicians and engineers during installation and troubleshooting processes.

·        Material Handling: Transporting and organizing cabling materials and equipment on-site.

·        Documentation Support: Assisting in maintaining accurate records of installed cables and work completed.

·        Pulling and Routing Cables: Assist in pulling and routing cables through conduits, raceways, ceilings, and other structures according to blueprints and project plans.

Responsibilities:

• Process Development & Support: Collaborate with foundries to develop and optimize process flows; interpret PDKs and process specifications to support design teams; evaluate new process nodes.
• Problem Solving: Work with foundries on failure analysis to identify root causes and drive process improvements; manage production issues and delays.
• Yield & Reliability Improvement: Analyze yield data, optimize process windows, and support reliability testing to ensure stable mass production.
• Cross-functional Communication: Serve as a technical interface between design houses and foundries; coordinate reviews to ensure alignment between design and process.
• Tape-out & Mass Production Support: Support tape-out activities, including mask data preparation and process documentation review; monitor production yield and process parameters to proactively prevent and resolve issues.
• Other ad-hoc duties as assigned

Requirements:

• Bachelor’s degree or above in Microelectronics, Materials Science, Physics, Electrical Engineering, or a related field.
• Solid understanding of semiconductor process flows; experience in process integration or process development is preferred.
• Strong data analysis skills with the ability to independently identify and resolve process-related issues.
• Excellent communication and coordination skills, with the ability to drive cross-functional problem-solving.
• Ability to effectively support international collaboration.

Position Summary

The Active Alignment Process Engineer is responsible for developing and optimizing optical alignment processes used in transceiver manufacturing. This role focuses on optical coupling performance, automation, equipment optimization, process stability, and NPI support.

Qualifications

Education

• Bachelor's degree or above in Optical Engineering, Electronics Engineering, Mechanical Engineering, Photonics, Physics, Manufacturing Engineering, or a related field.

Experience

• 5+ years of hands-on experience in optical assembly, precision alignment, semiconductor packaging, or photonics manufacturing.
• Experience with optical transceiver manufacturing is highly desirable.

Technical Skills

• Strong understanding of Active Alignment principles and optical coupling mechanisms.
• Experience with active alignment systems and automation platforms.
• Familiarity with:
• XYZ positioning stages
• 6-axis alignment systems
• Vision systems
• Motion control systems
• Understanding of optical performance measurements such as:
• Coupling efficiency
• Insertion loss
• Optical power measurements
• Experience in process development, recipe optimization, and troubleshooting.
• Knowledge of photonic packaging and optical assembly processes is preferred.
• Familiarity with SPC, DOE, and process capability analysis.

Soft Skills

• Excellent analytical and problem-solving skills.
• Strong communication and collaboration abilities.
• Ability to work effectively with multidisciplinary engineering teams.

Key Responsibilities

• Develop, qualify, and optimize Active Alignment processes for optical transceiver products.
• Establish and maintain alignment recipes, process parameters, and operating procedures.
• Optimize optical coupling performance, process repeatability, and manufacturing throughput.
• Improve:
• Yield
• Alignment accuracy
• Equipment utilization
• Process stability
• Cycle time
• Investigate optical performance failures and manufacturing issues.
• Support NPI projects, engineering builds, and product transfer into mass production.
• Collaborate with Product, Optical Design, Process, Test, and Manufacturing Engineering teams.
• Conduct process characterization, capability studies, and DOE experiments.
• Develop and maintain Bonding Programs, alignment recipes, SOPs, and Work Instructions.
• Participate in equipment installation, qualification, and acceptance activities.
• Ensure manufacturing processes meet quality, reliability, and customer requirements.
• Drive continuous improvement initiatives to enhance operational efficiency and product performance.

We are online Christian Bookstore and our website is www.ettonbookstore.com. This position is open to candidates who can meet below full requirements or partial. Fresh graduate also welcome to apply.

1. Responsible for the daily operations of e-commerce: processing daily sales orders, order fulfillment, inventory updates, product dispatch, invoicing, and responding to customer inquiries etc..

2. Promptly address customer inquiries, feedback, reviews, and resolve any customer concerns related to online orders and social media platforms.

3. Participate in and support e-commerce initiatives to enhance customer loyalty, engagement, and purchase behavior.

4. Create and maintain website content, ensuring all content is up-to-date, and verify that all pages, products, and prices on the site are accurate and in line with trading standards.

5. Develop and execute strategies and campaigns to achieve e-commerce platform sales targets, with full responsibility for budget management, performance evaluation, optimization, and analysis.

6. Manage brand presence on third-party e-commerce platforms such as Shopee, Lazada, Tiktok, etc., through collaborative campaigns to maximize brand exposure and generate more sales.

7. Prepare weekly/monthly sales reports for management review.

8. Provide analytical reports on online sales and browsing activities, customer behavior, and purchasing patterns.

9. Work closely with the Finance team for monthly account closing reports.

10. Understand the current system's capabilities and limitations and continuously implement improvements to systems and processes.

11. Closely monitor competitors' activities and stay updated on current market trends.

12. Plan and execute the operational flow of e-commerce operations, activities (e.g., live streaming, giveaway campaigns, etc.), and projects when required.

13. Provide administrative and accounting supports.

Requirements

1. Secondary School/O Level, Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, preferably in the field of Marketing/Business Management or equivalent.

2. Candidates with specialization in Digital Marketing/E-commerce/website administration or equivalent are preferred.

3. Hands-on experience with Adobe Illustrator/Photoshop/After Effects/Shopify/WordPress.

4. Possess initiative and be results-oriented.

5. Meticulous and highly accurate in assigned tasks.

6. Good analytical skills and attention to detail.

7. Able to work independently in a fast-paced environment.

8. Able to cover other duties if required

Benefits

1. Appropriate training will be provided by Etton Bookstore to ensure you can perform your duties effectively.

2. Attractive basic salary, commission, and/or shares benefits will be offered to successful candidates.

3. Interested applicants, please state your expected salary, last drawn salary, and starting date.

4. Immediate position available

*We regret to inform that only shortlisted candidates will be notified.

Job Summary

The Production Engineer supports and optimizes daily electroplating operations to ensure consistent product quality, efficient production flow, and compliance with safety and environmental standards. The role requires strong knowledge of plating processes, chemical bath control, equipment maintenance, and continuous improvement.

Key Responsibilities

1. Process Parameter Control

• Perform daily checks on all process parameters (temperature, pH, current, bath levels, flow, pump condition).

• Audit operators to ensure each process step is carried out according to specification and SOP.

• Train operators on proper equipment usage: valve operation, pump priming and air-trap checks, chiller operation, and basic line troubleshooting.

• Ensure timely correction actions when deviations are found.

2. Process Optimization

• Identify opportunities to improve loading efficiency (fixture design, part orientation, racking method).

• Work with Production and Process Engineering to increase throughput and reduce bottlenecks.

• Support improvements on cycle time, workflow, and chemical usage.

3. Quality Troubleshooting

• Participate in root-cause investigations for defects (e.g., poor adhesion, uneven colour, stains, white spots, roughness).

• Work closely with QA to verify findings and implement corrective actions.

• Escalate complex technical issues to senior Process Engineers when deeper subject expertise is required.

4. Equipment & Line Readiness

• Support preventive maintenance activities for pumps, agitators, rectifiers, chillers, filtration systems, and plating/anodizing tanks.

• Assist maintenance team in diagnosing equipment abnormalities that affect production stability.

• Ensure calibration of basic instruments (pH meter, conductivity, thickness gauges) is done on time.

5. Documentation & Reporting

• Complete production forms, bath check sheets, process logs, and operator audit records accurately.

• Update SOPs and work instructions when process changes occur.

• Prepare daily reports on process status, defects, and deviations.

6. Safety & Environmental Compliance

• Ensure safe handling of parts, chemicals, jigs, and equipment.

• Follow SDS and internal EHS requirements for chemical storage and disposal.

• Support EHS team during inspections (wastewater, ventilation, PPE compliance).

• Conduct on-the-job safety briefings for operators.

Qualifications

• Degree or Diploma in Chemical Engineering, Mechanical Engineering, Materials Engineering, or related field.

• 1–5 years’ experience in plating/electroplating, surface finishing, or chemical processing preferred.

• Strong analytical, troubleshooting, and process improvement skills.

• Knowledge of Lean Manufacturing, SPC, and chemical safety standards.

Skills Required

• Understanding of electroplating techniques (e.g., nickel, chrome, zinc, gold, tin).

• Ability to read technical drawings and interpret plating thickness requirements.

• Experience with rectifiers, chemical pumps, dosing systems, and wastewater treatment.

• Good teamwork, communication, and leadership skills.

Job Summary

You will coordinate and follow up on corrective repairs, prepare and fabricate materials, conduct site visits for equipment maintenance checks, and perform general mechanical tasks to support operational efficiency.

Responsibilities

• Coordinate corrective repair requirements with Maintenance Engineer and external workshops to ensure timely resolution
• Read and interpret basic drawings and fabrication instructions to verify raw material dimensions and requirements
• Prepare and cut raw materials to specified sizes and carry out fit-up for fabrication tasks
• Perform simple welding, painting, material cutting, washing, pipe fitting, equipment fabrication, assembly, and grinding to maintain machinery and equipment
• Conduct site visits to inspect machinery and equipment usage and maintenance, compiling photographic reports for management
• Undertake ad-hoc responsibilities assigned by management to support operational needs
• Communicate complex concepts clearly to team members and stakeholders to facilitate understanding and action
• Work independently and collaboratively within a team to meet project deadlines and quality standards
• Manage work under pressure and tight deadlines while maintaining quality and safety standards
• Work on weekends and night shifts as required to support operational continuity

Preferred competencies and qualifications

• Good interpersonal, analytical, and problem-solving skills to identify issues and implement effective solutions

Job Description & Requirements

• Undertake ad-hoc responsibilities assigned by management
• Coordinate any corrective repair(s) requirements with Maintenance Engineer and follow up action
• Liaise, deal and follow up on corrective repairs with external workshop
• Able to read and understand basic drawings/fabrication instructions
• Check raw materials, dimensions and requirements from drawings
• Prepare to cut the raw materials to size and to carry out fit up of the raw materials
• Simple welding, general mechanical job, such as painting, material cutting, washing, pipe fitting, fabricate equipment, assembly, grinding, etc.
• Conduct site visits and compile pictures for reporting to management to ensure machineries and equipment are being used and maintained correctly on site

Requirements

• Ability to work under pressure and to tight deadlines.
• Ability to communicate complex concepts
• Able to work independently and in a team
• Good interpersonal, analytical and problem-solving skills
• Able to work on weekend and Night shift.