Total 12,713 job vacancies in Singapore

Requirements

• Bachelor’s degree in Computer Science, Electrical Engineering or related fields and at least 5+ years of related professional experience or Master’s degree in Computer Science, Electrical Engineering or related fields with 3+ professional experience.
• Deep understanding of layout methodology from initial chip planning to tape-out and parasitic optimizing in layout
• Experience in advanced process technology and Fin-FET is preferred
• Have a high level of proficiency in interpretation of CALIBRE DRC, ERC, LVS, etc. reports
• Possess high-level proficiency/knowledge of Synopsys or CADENCE layout entry tools
• Programming skills in any of the following are a plus: Skill or Ample or Perl, etc.
• Strong technical and analytical background, problem solving skills, etc.
• The candidate must have a proven record of laying out high-performance analog circuits in state-of-the-art CMOS process technologies, successfully performed top-level integrations, and placed products into volume production multiple times.
• Proficient in spoken and written English

Job Responsibilities

• Working with global teams across Argentina, Singapore, the U.S., and Europe, you will run simulations and verifications using Cadence Virtuoso, collaborating closely with the designer to refine and debug iteratively until the design meets specifications. Project durations vary from a few months to a year and a half with flexibility to switch based on changing priorities is appreciated
• Regular meetings with your paired designer ensure collaborative information sharing, integral to Marvell's commitment to partnership and teamwork.
• Key contributor and crucial role in the project lifecycle, participating in routine meetings as a technical mentor, layout team, and the broader project team.
• Provide updates on progress and may involve presenting specific issues or solutions encountered during the development of cutting-edge technologies
• Continuous learning and knowledge-sharing among colleagues

Job Summary

Prepare detailed mechanical system designs and lead site coordination to ensure timely, cost-effective project delivery. Manage resources, liaise with authorities, and resolve technical issues to support successful construction outcomes.

Responsibilities

• Prepare detailed designs and engineering plans for mechanical systems to meet project specifications.
• Lead day-to-day coordination and management of all site works, including inspection, testing, and commissioning.
• Distribute instructions from construction managers to subcontractors and ensure compliance with project requirements.
• Plan and control resources, including materials, tools, and equipment, to optimize site operations.
• Manage project costs, timelines, and manpower resources to maintain efficient progress.
• Liaise with appointed Mechanical and Electrical Professional Engineers for submissions to authorities.
• Attend site progress meetings and address technical issues, reporting updates to the Construction Manager.
• Coordinate with authorities for plan approvals and site inspections, preparing and vetting drawings for submission.
• Serve as the primary contact for Civil and SWC representatives on site to facilitate collaboration.
• Monitor and update daily site progress reports to track project status.
• Analyze complex problems by reviewing relevant information, developing options, and implementing effective solutions.
• Apply logical reasoning to evaluate alternative solutions and approaches to technical challenges.
• Perform other ad-hoc duties as assigned to support project success.

Required competencies and certifications

• Experience working on LTA projects or with similar government authorities.
• Bachelor’s Degree, Post Graduate Diploma, or Professional Degree in Mechanical Engineering or equivalent.
• Minimum five (5) years of engineering experience post-tertiary education, including at least three (3) years in commercial mixed development projects of comparable size and complexity.

Other Information

• Site Office Address: CPF Jurong Building Singapore 608546

In Maybank, we are seeking a hands-on engineer to support the Emerging Technologies function within the FinTech & Emerging Tech CoE.  

This role focuses on adapting and building new technologies including digital asset and tokenization capabilities, delivering high-impact experiments and scalable reference architectures aligned with the bank’s strategic priorities.  

You will work across engineering, experimentation, and business collaboration to translate emerging technologies into practical, enterprise-ready solutions. 

Key Responsibilities 

Engineering and Platform Development  Design, build, and integrate software and infrastructure for emerging technology initiatives, including blockchain-based solutions, smart contracts, APIs, and microservices. 

• Develop reference architectures and standards in line with security, cryptographic, and enterprise architecture policies and best practices. 

• Work hands-on with containerization, orchestration, and infrastructure-as-code to support emerging technology workloads. 

• Develop tools as needed to support automation and maintenance across the emerging technology SDLC. 

Experimentation and Prototyping 

• Build PoCs and MVPs with a clear path to productionization, ensuring design decisions account for scalability, security, and operational constraints from the outset 

• Run small, high-impact experiments to validate use cases and identify quick wins. 

• Set up and manage sandbox and test environments. 

• Document outcomes and recommend scaling approaches. 

Collaboration and Technology Evaluation 

• Work with business stakeholders to assess solution maturity and use-case applicability, including build vs buy vs partner assessments and RFI / RFP / RFQs. 

• Translate functional and non-functional requirements into technical designs and working solutions. 

• Contribute to defining architecture patterns, governance frameworks, and design standards for digital asset implementations. 

Scaling and Operationalization 

• Evolve PoCs into enterprise-grade solutions with production readiness (e.g., resilience, scalability, security). 

• Develop tools and playbooks for continued support and maintenance of deployed assets (e.g., monitoring, testing, forensics). 

• Enable integration with external ecosystems, marketplaces, and digital asset networks. 

Document and track technology debt and key business continuity risk items with defined action plans. 

Role requirements

• 6-15 years of experience in software engineering and architecture. 

• Hands on expertise in building and delivering solutions on DLT platforms (Ethereum, Hyperledger, Corda) 

• Experience developing production-grade Digital Assets solutions, such as tokenization platforms, lifecycle management, custody solutions, compliance / risk management systems, interoperability protocols, etc. 

• Strong programming skills (e.g., Java, Typescript / NodeJS, Python, Go, Solidity and / or Rust). 

• Experience in scalable API, WebSocket, Microservices, Event-Based and Cloud-Native architectures. 

• Experience working with various emerging technologies across infrastructure to application layers. 

• Hands-on experience with containerization, orchestration, and infrastructure-as-code tooling (e.g., Kubernetes, Terraform, Ansible, CI/CD systems) 

• Practical understanding of applied cryptography and secure system design, particularly in regulated or financial environments. 

• Strong problem-solving capabilities and ability to operate in agile, fast-paced experimental environments. 

• Effective communication skills with the ability to explain complex technical concepts to non-technical stakeholders.

Technical Leadership & Strategy

• Set technical direction for CPIE initiatives in UE_ROW, quality indices, Frontend–PTS integration, and high‑value bits (PG2+) yield, aligned to business priorities and technology roadmaps.
• Architect new data solutions, methodologies, and frameworks to:
• Identify and prioritize yield, quality, and reliability improvement opportunities across process, test, and design
• Model, monitor, and benchmark tool performance and process capability at scale

• Enable equipment prognostics and advanced process integration optimization

• Define test and screening optimization strategies that materially improve product grade yield without quality escape

• Drive end‑to‑end problem solving on complex, cross‑module issues that cannot be addressed within a single function or site.

Cross‑Functional & Organizational Influence

• Partner deeply with Process & Equipment Engineering, Manufacturing (MFG), Product Integration Engineering (PIE), and Data Science (DS) teams to:

• Establish feasibility and technical soundness

• Quantify business impact

• Rapidly prototype and mature solutions

• Act as a technical integrator across Global Quality (GQ), Product Engineering (PE), Central PEE (CPEE), Smart Manufacturing AI (SMAI), Technology Development (TD), and suppliers, ensuring solutions are scalable, manufacturable, and production‑ready.

• Influence technical and strategic decisions beyond direct ownership, including across sites, nodes, and organizations.

Execution, Scale, and BKM Deployment

• Lead the development, validation, and global deployment of BKMs, ensuring sustained performance and learning‑rate acceleration.

• Balance long‑term architectural thinking with near‑term execution, driving measurable improvements in yield, quality, and cycle time.

• Anticipate risks and tradeoffs (technical, schedule, cost, quality) and provide clear decision frameworks for leadership and stakeholders.

• Support global engineering teams, including engagement across time zones and non‑standard hours when required.

Collaboration & Leadership Expectations

• Function as a go‑to expert and mentor within CPIE and the broader FE engineering community.

• Lead by influence rather than authority, enabling alignment across diverse technical disciplines.

• Champion continuous improvement in systems, methods, tools, and skill sets to keep Micron best‑in‑class.

• Demonstrate a strong growth mindset—continuously learning, unlearning, and evolving technical approaches.

Communication

• Communicate complex technical concepts clearly and concisely to both technical and executive audiences.

• Produce high‑quality written artifacts (technical proposals, design reviews, decision memos).

• Represent CPIE effectively in cross‑org reviews and executive forums.

• Willing to travel as needed to support global objectives.
  

  Requirements & Technical Competency

  • PhD, Master’s, or Bachelor’s degree in Engineering or related discipline.

  • 8+ years of semiconductor industry experience, with deep exposure to product integration, process engineering, test solutions, product engineering, or circuit design.

  • Recognized depth in semiconductor manufacturing processes, equipment, and control systems.

  • Strong proficiency in data analysis and modeling tools (e.g., Y3, JMP, Python).

  • Demonstrated application of statistical methods and/or machine learning to real manufacturing problems.

  • Proven track record of technical leadership, decision‑making, multi‑tasking, and root‑cause resolution on ambiguous problems.

• Contract: 1 year renewable/ convertible

• Location – Ang Mo Kio + project sites

• Salary Range – $3000 to $3500

• Working Days & Time: Mon to Fri (8.30am to 6pm)

Job Descriptions:

• Perform maintenance, troubleshooting, preventive servicing, installation, upgrading, and technical support works for the Card Access System

• Carry out troubleshooting, fault diagnosis, and rectification of system issues, including the replacement of defective hardware components and devices where necessary

• Perform scheduled preventive maintenance (PM) works to ensure the system operates efficiently and reliably.

• Attend to breakdowns, service calls, and technical issues promptly to minimize system downtime and ensure continuous operation of the Card Access System

• Perform additional installation, upgrading, testing, and commissioning works for Additions & Alterations (A&A) projects as and when required

• Assist in system configuration, basic programming, and verification testing to ensure proper integration and functionality of newly installed or replaced equipment

• Maintain proper service documentation, maintenance records, and reports for all maintenance and installation activities carried out

• Observe and comply with all workplace safety requirements, operational procedures, and company guidelines while carrying out duties on-site

Job Requirements:

• NITEC / Higher NITEC / Diploma in Electrical, Electronics or related disciplines

• Candidates without experience are welcome to apply as training will be provided

• Basic knowledge of electrical or electronic systems will be an advantage

• Hands-on, willing to learn, and able to work independently as well as in a team environment

• Able to travel to customer sites for maintenance and installation works

• Willing to perform overtime and standby duties when required

If you are interested, please submit your application here. We appreciate your application and will notify you if you are shortlisted for the role.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Outsourcing Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persoloutsourcing.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

EA License No: 90C3494 | EA Personnel No: R21103663 | EA Personnel Name: Azhar Anuwar

Job Responsibilities:

• Plan, execute, monitor, and control all technical aspects of projects.
• Lead or contribute to new system/network infrastructure setups or upgrades.
• Support operational systems in line with contractual Service Level Agreements (SLAs).
• Conduct routine preventive maintenance and manage operational activities efficiently.
• Prepare comprehensive project documentation and reports.
• Troubleshoot and resolve technical issues promptly.

Requirements:

• Strong knowledge of Windows Server OS and Linux OS; experience in virtualized environments is a plus.
• Hands-on experience with virtualization, hypervisors, and the Nutanix platform is an advantage.
• Understanding of VPNs and firewall appliances is beneficial.
• Familiarity with network switches and routers is preferred.

• Working Location: Woodlands North Coast
• Working Days: Monday – Friday
• Working Hours: 9:00am -6:00pm
• Starting Salary: $3,500 to $6,500

Roles & Responsibilities

• Designing, manufacturing, and installing components that fulfil requirements
• Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement)
• Analysing problems or deficiencies and developing solutions to resolve them
• Conducting experiments and evaluations to improve and innovate product designs
• Creating plans and designs using CAD technology
• Evaluates final product’s overall performance, reliability and safety
• Estimating budgets and time scopes for each project
• Writing technical documentation for machine operators
• Ensuring that products meet compliance regulations
• Collaborating with project managers and other engineers in our team
• Liaison with vendors on finalization of modules
• Responsible for mechanical documentation

Job Requirement

• Bachelor’s Degree in Engineering (Mechanical/Mechatronics) with at least 2 years of mechanical engineering experience, preferably in the semiconductor industry or with strong equipment-related exposure
• Hands-on experience in CAD, CAM, and Matlab/LabView programs for simulation and data analysis
• Experience in troubleshooting PC-based fully automated equipment in semiconductor or similar industries
• Knowledge in die bonder application and process will be an advantage.

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Job Description

• Ensure that all interfaces between project and other package contractors are identified, documented and managed during all stages and phases of the project, FEED, detailed engineering, fabrication, construction and commissioning, start-up, etc.
• Provide relevant expertise of plant construction in the area of management and coordination.
• Represent the Project where appropriate to client, consulting companies and other contractors or service providers as appropriate to the needs of the work. It is necessary to proactively manage the information and responses relevant to all internal and external interfaces.
• Oversee general Interfaces associated with contract package delivery at point of interfaces, Interface schematics, Tie-ins, Project schedule impact/construction plan for interface scope, Contracting issues for interface elements, structure clashes, permits, and HSE of interfaces
• Ensure development and maintenance of an overall Interface Management Plan and Register for projects/packages covering all identified and potential interfaces, along with the relationship/references relative to the activities as per the contract.
• Support Project Manager in resolving all interfaces between Contractors, sub-contractors and clients.
• Ensures from a point of interface perspective that technical integrity and HSE requirements are met cost effectively throughout the project construction.
• Monitor status of interface activities between the different project packages to ensure that all interface related requirements are met during detailed engineering and according to the Project milestone schedule and completion priorities.
• Develop Interface documents, systems, diagrams, matrices etc. to coordinate completion of agreed deliverables.

Requirements

• Bachelor's Degree in Engineering (Degree must be recognized by the Professional Engineers Board, Singapore).
• 5 years’ experience of Front-end engineering, engineering design, procurement, construction, hook-up, and commissioning with a good understanding of technical integrity management systems, project management, quality and assurance systems.
• Green field project and a willingness and ability to work with all disciplines and nationalities.
• Teamwork skills being able to work with the various parties such as client, other contractors, sub-contractors, vendors to resolve issues and reach decisions that are in the best interest of delivering the implementation plan.
• Solid experience in project engineering and project management.
• High awareness of safe working practices associated with design, construction, tie-in, pre-commissioning, installation, hook-up and commissioning of environmental project.
• Strong interpersonal and English communication skills – verbal and written.
• Fully conversant in Microsoft Office Products (Outlook, Word, Excel, Power point, Project, etc.).

Responsibilities

• Assist in construction and basic design development phase. Preparation of equipment, technical specifications, general arrangement, detailed equipment compartment layouts, space coordination and equipment list.
• Review all mechanical equipment, vendor’s proposals for technical accuracy and constructability. Understand sizing of equipment and prepare equipment specification.
• Prepare working drawings, establish design criteria standards specification and mechanical construction guideline drawings.
• Develop and check an equipment’s handing study for marine spaces and decks.
• Check submittals and prepare the installation or construction drawings when needed.
• Perform site visits to solve engineering problems when required to determine existing conditions or verify new construction.
• Develop and check marine and drilling system PFDs or P&IDs, including equipment size systems and calculate pump system pressure losses.
• Coordinate / execute contract specification requirements and production inputs into engineering drawing / document.
• Provide progress reporting and schedule management of engineering deliverables.
• Coordinate with other production team members, subcontractors and consultants to resolve technical issues onsite which affect the mechanical schedule and project deliverables.
• Meet with vendors, client reps, accreditation representatives when required.
• Review and reply to class comments.
• Perform any other tasks as may be assigned by the supervisor.
• Ensure compliance to relevant government regulations and company’s quality, safety, health and environmental (QSHE) policies, practices and procedures at all times.

Requirements

• Minimum 3 years of relevant experience working in a marine/offshore industry and a Diploma in mechanical or marine or related engineering discipline or minimum 6 years working in a marine/offshore industry.
• Prior experience in newbuild andconversion of AHTS.
• Possessing knowledge in HVAC systems, piping, and mechanical equipment.
• Familiarity with Marine & Offshore rules, regulations and requirements.
• Knowledge of Intergraph Software will be an added advantage.
• Good communication skills, meticulous, resourceful, able to multi-task.
• A team player with the ability to work independently as well as in a team.
• Able to perform marine equipment’s sizing.

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Responsible for creating manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• In Charge of developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for creating CNC code/program for machining as well as designing toolings, fixtures and gauges.
• In charge of creating special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding etc.
• Responsible for conducting pre-production pilot run and training for associates.
• Provide technical support to Production to achieve technical and quality requirements.
• Responsible in liaising with OEM on product requirements, process qualifications and technology development.
• Support continuous improvement projects and Request for Quote (RFQ) proposal development and process

Requirement

• Min Degree in Mechanical/Manufacturing/Aeronautical/Material Engineering
• Min 3 years’ experience in precision engineering in Manufacturing Environment with competent with CAD software;
• Experience in special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding will be advantage

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.

EA License No: 17C8900

Job Description:

• Responsible for creating manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• In Charge of developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for creating CNC code/program for machining as well as designing toolings, fixtures and gauges.
• In charge of creating special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding etc.
• Responsible for conducting pre-production pilot run and training for associates.
• Provide technical support to Production to achieve technical and quality requirements.
• Responsible in liaising with OEM on product requirements, process qualifications and technology development.
• Support continuous improvement projects and Request for Quote (RFQ) proposal development and process

Requirement

• Min Degree in Mechanical/Manufacturing/Aeronautical/Material Engineering
• Min 3 years’ experience in precision engineering in Manufacturing Environment with competent with CAD software;
• Experience in special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding will be advantage

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.

EA License No: 17C8900

Job scope:

• Provide technical and after-sales service for Endoscopy equipment in local hospitals.
• Oversee installation of equipment according to specifications.
• Provide basic user training for equipment installed and coordinate with customers and site preparation of Endoscopy equipment.
• Analyze malfunctions.
• Consult engineering supervisor to resolve problems.
• Propose and advise customers in sign-ups of service contract.
• Perform servicing, repairing, and Preventive Maintenance for Endoscopy equipment under Maintenance contract
• Prepare site for installation of new Endoscopy Medical equipment, coordinating with customers.
• Support Sales and Marketing team in promotion of accessories and stand-in cases for endoscopy procedures to better understand the use and customer’s feedback.

Job Requirement:

• Diploma in Biomedical, Electrical, Electronic, or Mechanical Engineering, or equivalent.

• 0-2 years of related field service experience. Fresh graduate is acceptable.

• Technical Skills:
  - Device Troubleshooting: Ability to diagnose and repair multi-symptom hardware and software issues on complex electro-medical devices.
  - Calibration & Preventive Maintenance (PM): Expertise in following strict biomedical Standard Operating Procedures (SOPs) to guarantee device safety, compliance, and accuracy.
  - Network/ IT Integration: Understanding of hospital networking systems to ensure medical devices communicate seamlessly with electronic health records.

• Soft Skills:
  - Customer-Facing Communication: Must act as the face of service excellence, routinely interacting with doctors, nurses, and hospital biomedical teams.
  - High-Pressure Adaptability: Capacity to prioritise service effectively to minimize equipment downtime and ensure optimal patient care.
  - Physical& Availability Requirements: Must be physically capable of lifting equipment, willing to be on-call for after office hour or weekend duty
  
• Good communication and problem-solving abilities when collaborating with both internal teams and external stakeholders.
  
• Able to work independently and is detailed-oriented.
  
• Able to attend to breakdown after office hours or stand-in cases on weekends.

• 5 days work week, Working Hours: 8.30am to 5.30pm
• Office location: Near Jurong East MRT
• Friendly working environment

Responsibilities

The Field Service Engineer is expected to perform the following technical support for semiconductor equipment at customer sites:

• Install, commission, calibrate and test automation machines with team members.
• Troubleshoot and repair machines malfunctions to minimize downtime.
• Conduct spare parts replacement.
• Provide routine technical support and on-site production assistance to clients.
• Monitor machine performance and submit report and feedback timely.
• Ensure all service activities comply with Safety and Regulatory Standards.
• Build and keep strong relationships with customers and internal team.

Requirements

• Diploma or Degree in Engineering, Factory Automation or related fields.
• Ability to read mechanical, pneumatic and electrical drawing/diagrams.
• Hands-on experience in machine installation and maintenance.
• Prior exposure to automation machinery in semiconductor industry is an added advantage.
• Good communication and problem solving skills.
• Basic proficiency in MS Office Applications (i.e. Excel, Word).
• Hands-on experience on Automotive servicing is welcome.
• Training will be provided.

Job Responsibilities:

• Quality role to handle incoming and in process quality check and control. Govern the quality control with defined specification and update COA per specific customer requirement and specification.
• Triggering for MRB review if found non-conformity of product. Attend I-share meeting Ops and engineering
• Work with internal team for customer quality issue investigation, 8D and failure verification, setting standards for quality.
• Coordinate with internal team on Change Management and call biweekly meeting with team to review the overall change request. Prepare PCN report for notification to customer and align meeting with sales and CS on communication strategy.
• Review product specification and support for banned/restricted substance analysis and coordinate with third party.
• Support on in Process/Product Quality Audit, System and Customer audit
• Working with other staffs to establish procedures and quality standards and to measure against these targets for compliances. Determining, negotiate and agree on in house quality procedures, standards and specifications.
• Team member for PDP Gate3,4 and 5 and work with innovation team on the CTQ , specification and test method during PDP
• Coordinate with engineering team on SPC review and drive for Cpk improvement activities. Assist in internal statistical information, distribution and analysis. Knowledge of SPC and ability to use Minitab/JMP.
• Training to the quality control inspector and competency development
• Engage with inspection equipment vendor on PM, Calibration and carried out GRR
• Annual Capex and headcount planning to support operation

Job Requirement:

• Degree in Engineering/Material Science/Chemistry
• At least 3 years relevant experience is required
• ISO9001 quality management system
• Knowledge in SPC, Minitab/JMP, FMEA, and process mapping

What’s in It for You?

Join an Industry Leader | MNC/Listed, Established & Respected

Competitive Salary: : Up to $5000+ AWS + Bonus

Work-Life Balance OR Work Schedule: 8 AM - 5.30 PM (Mon – Fri)

Work Location: Tuas (Shuttle service provided-Tanah Merah Mrt)

Your Role, Your Influence:

Responsibilities:

• Monitor real-time system events and alerts, ensuring timely detection and escalation of issues.

• Coordinate response activities, including activating support teams and tracking incident resolution.

• Act as first responder for system defects and perform initial troubleshooting.

• Support communication and coordination via calls and group channels for incident management.

The Ingredients for Success:

• Diploma or Higher Nitec in Infocomm Technology or related field.

• Comfortable working 12-hour shifts, including weekends and public holidays (based on roster).

• Prior experience in a Network Operations Centre (NOC) is an advantage.

Click Apply Now to upload your updated Resume/CV, and take the first step toward an exciting new career!

Only shortlisted candidates will be contacted.

TEH SIEW YING

Registration No: R21103305

EA Licence no.: 14C7121

What’s in It for You?

Join an Industry Leader | MNC/Listed, Established & Respected

Competitive Salary: : Up to $5000+ AWS + Bonus

Work-Life Balance OR Work Schedule: 8 AM - 5.30 PM (Mon – Fri)

Work Location: Tuas (Shuttle service provided- Joo Koon Mrt)

Your Role, Your Influence:

Responsibilities:

• Troubleshoot and support enterprise applications, servers, and platforms.

• Analyse Python code, system logs, and performance metrics to resolve issues.

• Maintain Linux/Windows servers, including upgrades, patching, and diagnostics.

• Support OutSystems and Qlik Sense platforms to ensure system reliability.

The Ingredients for Success:

• Diploma/Degree in Computer Science, IT, Systems Engineering, or related field.

• 3–5 years of experience in systems support, infrastructure, or IT operations.

• Strong skills in Python, Linux/Windows administration, and troubleshooting.

• Experience with server hardware, system monitoring, and performance optimization.

• Exposure to OutSystems, Qlik Sense, automation, cloud, or virtualization technologies is a plus.

Click Apply Now to upload your updated Resume/CV, and take the first step toward an exciting new career!

Only shortlisted candidates will be contacted.

TEH SIEW YING

Registration No: R21103305

EA Licence no.: 14C7121

What’s in It for You?

Join an Industry Leader | MNC/Listed, Established & Respected

Competitive Salary: : Up to $5000+ AWS + Bonus

Work-Life Balance OR Work Schedule: 8 AM - 5.30 PM (Mon – Fri)

Work Location: Tuas (Shuttle service provided- Joo Koon Mrt)

Our client is seeking Engineer (Underwater Sonar) to join their team!

Your Role, Your Influence:

Responsibilities:

• Install, configure, and commission underwater sonar systems.

  Perform maintenance and troubleshooting to ensure system reliability.

  Support integration, calibration, testing, and acceptance activities.

  Provide on-site technical support and basic user training.

  Prepare service reports and maintain technical documentation.

  Liaise with OEMs and vendors for technical issue resolution.

The Ingredients for Success:

• Diploma/ITE/Degree in Electronics Engineering or related field.

  Minimum 2 years’ experience in maintenance or technical support.

  Comfortable with 24/7 standby and responding to system faults within required timelines.

Click Apply Now to upload your updated Resume/CV, and take the first step toward an exciting new career!

Only shortlisted candidates will be contacted.

TEH SIEW YING

Registration No: R21103305

EA Licence no.: 14C7121

Job Description:

• Plan and schedule work sequences for construction operation, according to the Project Management Plan.
• Liaising with consultants on design analysis, design work, design check for approval and to resolve technical issues on site.
• Liaising with client on design submission and work progress supervision.
• Site inspection for civil work, which includes excavation, structural, casting and ensure that the work is executed as per the project specification and construction drawing/final approved drawing from authorities.
• Ensure worker carried out meet out quality standards and contractual requirements.
• Ensure Environmental, Safety and Health practices re carried out effectively.
• Project engineers will be joining a training program to become senior member of project management team.

Job Requirements:

• Degree in Civil or Structural Engineering, Building / Construction Management, or any other discipline related to building construction.
• At least 5 years of related experience.
• Good in technical submission.
• Able to lead sub-contractors.
• Good interpersonal skills and team player.

Job Summary

We are seeking a Senior DevOps Engineer to join our growing engineering team. In this role, you will work independently to design, build, and optimize infrastructure and deployment pipelines that ensure the stability, scalability, and security of our systems. You will take full responsibility for automating workflows, improving observability, and enabling development teams to ship code faster and safer. This is an excellent opportunity for an experienced engineer with at least 5 years of work experience who thrives on ownership, reliability, and technical leadership.

Key Responsibilities

• Infrastructure & Automation: Design, implement, and maintain scalable cloud infrastructure using Infrastructure as Code (IaC) tools.
• CI/CD Pipelines: Build and optimize automated pipelines for testing, deployment, and release management.
• Monitoring & Reliability: Establish observability standards, implement monitoring, logging, and alerting systems to ensure system health.
• Security & Compliance: Enforce best practices for cloud security, access control, and compliance across environments.
• Collaboration: Partner with backend, frontend, and product teams to ensure smooth deployments and reliable system operations.
• Process & Mentorship: Improve DevOps processes, share best practices, and mentor junior engineers.

Job Requirements

• Bachelor's Degree of Computing, Software Engineering, IT or related field.
• Experience: Minimum 5 years of DevOps, Site Reliability Engineering (SRE), or related experience.
• Tech Stack: Proficient with cloud platforms (AWS, GCP, or Azure), containerization (Docker, Kubernetes), IaC (Terraform, Ansible, Helm), and CI/CD tools (Jenkins, GitHub Actions, GitLab CI/CD, ArgoCD, etc.).
• Systems Knowledge: Strong background in Linux administration, networking, and distributed systems.
• Monitoring & Observability: Hands-on experience with tools like Prometheus, Grafana, ELK/EFK, or Datadog.
• Scripting & Automation: Proficient in one or more languages (Python, Go, Bash, etc.).
• Problem Solving: Skilled at diagnosing complex issues, ensuring high availability, and improving system performance.
• System Design: Capable of designing fault-tolerant, secure, and scalable infrastructure with disaster recovery in mind.

Soft Skills

• Team Mindset: Collaborate effectively across teams, proactively contributing to company goals.
• Ownership: Take responsibility for infrastructure health and ensure continuous improvements.
• Adaptability: Open to new technologies, evolving processes, and changing business needs.
• Communication: Clearly explain technical topics to both engineers and non-technical stakeholders.

What We Offer

• Technical Leadership Opportunities: Lead infrastructure design for high-impact projects and guide DevOps best practices.
• Continuous Growth: Access to mentorship, certifications, and a clear career progression path.
• High-Performance Collaboration: Work with a talented team in a modern DevOps environment (Agile/CI-CD, GitOps).
• Flexibility and Trust: An open culture that values innovation, autonomy, and results-driven decision-making.

JOB SUMMARY:

We're looking for a Senior Data Engineer to design and build complex data systems independently. You'll tackle challenging technical problems - optimizing query performance at scale, architecting fault-tolerant pipelines, and building high-throughput data services with minimal guidance. This role is for experienced engineers who can take ambiguous requirements, propose solid technical solutions, and deliver production-ready systems end-to-end.

This role requires 5+ years of hands-on experience building data infrastructure in production environments. You'll work independently on substantial technical projects, make sound architectural decisions within your domain, and contribute to raising the technical bar through code reviews and knowledge sharing. You're expected to be self-sufficient in execution while collaborating effectively with engineering, analytics, and product teams.

KEY RESPONSIBILITIES:

• Data Infrastructure: Design, develop, and maintain robust data pipelines and storage systems.
• Data Quality: Ensure high data reliability, consistency, and accuracy across all data flows.
• Performance Tuning: Optimize data processing jobs and system performance at scale.
• Process & Mentorship: Improve data engineering workflows and mentor junior data engineers.
• Collaboration: Work with business analysts, data scientists and backend teams to deliver timely, usable data solutions.

JOB REQUIREMENTS:

• Bachelor’s degree in Computer Science, Data Engineering, Software Engineering, or a related field.
• Experience: Minimum 5 years in data engineering or related backend engineering roles.
• Tech Stack: Proficient in Python or Java/Scala; experience with big data tools like Spark, Flink, Kafka, Airflow, and cloud platforms (AWS/GCP/Azure), good understanding of SQL.
• Data Modeling: Solid experience in building and maintaining data models, data warehouses, and ETL/ELT pipelines.
• System Design: Ability to design scalable, reliable data architectures that support analytics and real-time use cases.
• Data Governance: Familiar with best practices for data quality, security, lineage, and compliance.
• Cross-team Work: Strong communication skills and ability to work closely with product, engineering, and business analytics teams.

Soft Skills:

• Team Mindset: Contribute to shared goals and support team members with a collaborative approach.
• Ownership: Take initiative and full responsibility for delivering high-quality data solutions.
• Adaptability: Open to feedback, eager to learn new technologies, and flexible in changing environments.
• Communication: Communicate complex technical topics clearly to both technical and non-technical stakeholders.

What We Offer

• Technical Leadership Opportunities: Participate in high-impact projects and lead the design of critical systems.
• Continuous Growth: Access to mentorship, learning resources, and a clear career progression path.
• High-Performance Collaboration: Work with a talented team using modern development practices (Agile/CI-CD).
• Flexibility and Trust: An open culture that encourages innovation and autonomous decision-making.

About Gain City

At Gain City, we deliver expertise and quality solutions in air-conditioning, home appliances and consumer electronics. Established in 1981, Gain City is a trusted household name in Singapore. We take pride in our strong customer focus, innovative spirit, and commitment to service excellence. With a dynamic workforce and a network of stores and service centres island wide, we offer a vibrant and growth-oriented environment where employees are empowered to thrive, take ownership and make a real impact.

About the Role

You will be responsible for managing the installation of air conditioning and mechanical ventilation (ACMV) system in buildings. This role involves leading a team of competent supervisors and skilled workers in procuring materials, equipment and manpower, coordinating with stakeholders, installation of the ACMV system as well as conduct of testing and commissioning of the ACMV system.

Key Responsibilities

· To coordinate with main contractor, MEP contractors as well as other trades subcontractors to ensure smooth execution of works

· To provide technical guidance and support to supervisors and skilled workers in executing their works according to technical specifications and drawings, as well as prevailing codes and regulations.

· To ensure smooth execution of works in timely manner to meet project schedule

· To ensure compliance with industry regulations, safety standards, and company policies.

· To implement and enforce safety protocols to ensure the well-being of employees and customers.

· To stay informed about emerging technologies and methodologies in air conditioning repair and maintenance.

Qualifications and Requirements

· Degree in Mechanical Engineering or related disciplines

· Proven experience in management and execution of air conditioning and mechanical ventilation (ACMV) works

· Strong leadership and team management skills

· Excellent communication and interpersonal skills.

· Knowledge of safety regulations and industry standards.

· Certification in ACMV systems or related field is advantageous.

What We Offer

At Gain City, we are committed to the growth and development of our employees. You will be offered various learning and development opportunities and a collaborative, forward-thinking and growth-focused work environment to thrive in your career. You will also receive a comprehensive benefits package.

Join Our Team

If you are passionate about empowering people, fostering organizational growth and leading impactful strategies, apply now to be a part of our growing team!

Note

· Only shortlisted candidates will be notified

About the Role

As a Custom Software Engineer, you will design and build scalable, high-performing software solutions that address evolving business needs. You will contribute hands-on to development while collaborating closely with cross-functional teams, helping deliver reliable and efficient systems that create meaningful business impact.

Key Responsibilities

• Design, develop, and enhance custom software components aligned with business and technical requirements

• Apply sound engineering principles to deliver scalable, maintainable, and high-quality solutions

• Collaborate with cross-functional teams to ensure alignment with user needs and project objectives

• Analyze technical issues and propose practical solutions to improve performance and system reliability

• Participate actively in Agile development practices, including code reviews and sprint activities

• Contribute to continuous improvement of development processes, tools, and standards

• Support team members by sharing knowledge and fostering a collaborative working environment

Required Qualifications

• Proficiency in Custom Application Development and hands-on coding experience

• Strong foundation in Software Engineering principles, including object-oriented design and development

• Experience in software design and solution development for enterprise or business applications

• Ability to analyze problems and deliver efficient, practical solutions

• Experience working in Agile or iterative development environments

• Strong communication and collaboration skills with diverse stakeholders

• Ability to work independently while contributing effectively within a team

Preferred Qualifications (Optional)

• Familiarity with modern development frameworks and tools

• Exposure to cloud-based environments or microservices architecture

• Knowledge of DevOps practices such as CI/CD pipelines

• Experience in performance optimization and application scalability

About the Company / Team

We work with one shared purpose: to deliver on the promise of technology and human ingenuity. Every day, more than 775,000 of us help our stakeholders continuously reinvent. Together, we drive positive change and deliver value to our clients, partners, shareholders, communities, and each other.

We believe that delivering value requires innovation, and innovation thrives in an inclusive and diverse environment. We actively foster a workplace free from bias, where everyone feels a sense of belonging and is respected and empowered to do their best work.

At Accenture, we see well-being holistically, supporting our people’s physical, mental, and financial health. We also provide opportunities to keep skills relevant through certifications, learning, and diverse work experiences. We’re proud to be consistently recognized as one of the World’s Best Workplaces™.

Join Accenture to work at the heart of change. Visit us at www.accenture.com.

Equal Employment Opportunity Statement

All employment decisions shall be made without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by federal, state, or local law.

Job candidates will not be obligated to disclose sealed or expunged records of conviction or arrest as part of the hiring process.

Accenture is committed to providing veteran employment opportunities to our service men and women.

Directed multidisciplinary mechanical construction activities encompassing process piping, static equipment installation, storage tanks, structural steel erection, and plant infrastructure works across industrial projects.

• Managed project execution lifecycle, including planning, scheduling, resource allocation, procurement coordination, cost control, and progress monitoring to achieve project milestones within budget and schedule constraints.

• Led construction teams, subcontractors, and vendors to ensure compliance with engineering specifications, project quality requirements, and contractual obligations.

• Reviewed and validated engineering deliverables, including P&IDs, IFC drawings, Isometric Drawings, General Arrangement Drawings, Material Take-Offs (MTOs), and technical specifications to ensure constructability and execution readiness.

• Coordinated technical clarifications, design interfaces, site modifications, and approval processes with clients, consultants, engineering teams, and regulatory authorities.

• Developed detailed project schedules, execution strategies, construction work packages, method statements, and resource deployment plans to optimize productivity and project performance.

• Participated in tender evaluations, technical bid assessments, budget preparation, cost estimation, and commercial reviews for project acquisition and execution planning.

• Managed Mechanical, Electrical, and Process Utility installation activities across pharmaceutical, petrochemical, semiconductor, and oil & gas facilities while ensuring compliance with industry standards and client specifications.

• Administered inspection, testing, pre-commissioning, commissioning, and mechanical completion activities to facilitate successful system turnover and project handover.

• Coordinated client inspections, statutory approvals, work permits, quality audits, and acceptance testing activities throughout project execution.

• Monitored project performance through KPI-driven reporting, productivity analysis, risk mitigation measures, and corrective action implementation.

• Ensured strict adherence to Quality Management Systems(QMS), Inspection and Test Plans (ITPs), and applicable international codes and standards.

• Prefer to have CAD 3D, Microsoft vision knowledge to generate isometric piping diagrams and  P&IDs(Piping and Instrumentation Diagrams).

• Liaised with government agencies, statutory authorities, and regulatory bodies to monitor legislative changes, ensure regulatory compliance, and implement updated legal requirements within project operations.

• Maintained effective stakeholder engagement with clients, consultants, contractors, and senior management to ensure alignment of project objectives, technical requirements, and operational expectations.

• Required more than 5 to 10 years of experience.

Job Description

• Industry/ Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: West – Tuas (Nearest MRT: Gul Circle)
• Working Hours: 5 Days (Monday – Friday, 8:00 AM – 5:00 PM)
• Salary Package: Basic Salary + AWS + Transport Allowance + OT
• Duration: Permanent Role

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.
• Any ad hoc duties assigned

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Training is provided to inexperienced candidate

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #84843 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781