Total 683 job vacancies in Singapore

Job duties:

· Applies protective coats of paint, varnish, lacquer, and/or other related materials to interior and exterior surfaces of steel/metal structures.

· Washes, scrapes, sands, torches, and/or smoothes interior and exterior surfaces prior to painting, varnishing, lacquering or applying other related materials.

· Cleans equipment, paint mixing area, and work area.

· Operates sandblasters, spray equipment, other small power equipment and lifting equipment.

· Applies paints, stains, surface preparatory materials, and undercoating materials to a variety of surfaces, as appropriate, and according to Materials Safety Data Sheets ensuring compliance with hazardous materials guidelines.

· Identification, safe handling, and appropriate disposal of paints, stains, preparatory and undercoating materials and other hazardous materials.

· mixes paints and other solutions and monitors drying to ensure desired results.

· Follows all required safety procedures.

Knowledge, Skills and Abilities:

· Knowledge of the tools, equipment, materials, and application techniques common to the painting trade.

· Knowledge and skill in hazardous materials handling, application, and disposal.

· Skill in the preparation and application of paints, stains, and surface preparation for materials

Requirements:

· Proven experience as a painter.

· Knowledge of painting material and how to select, mix and apply them.

· Aptitude in using appropriate tools.

· Good basic math skills.

· Conscientious with great attention to details.

Job Description & Requirements

I- Basic Function/General Scope of Work

The position is involved in project management for all aspects (contract, and technical, quality and project schedule etc) of the projects assigned. The position works closely with Project Manager so as to complete and achieve the projects’ objectives/ metrics as planned.

II- Key Duties & Responsibilities

1. Conducts site inspection, collects the data and transfers the information to customer if any changes on the drawings.

2. Support Project manager to communicate with customer after installation team verifies all drawings prior to moving to construction phase.

3. Coordinates with installation team, customers and sub contractors during construction.

4. Checks and inspects the quality of work carried out by workers of subcontractors.

6. Assists and follows the assignments of project manager in ensuring that the projects are implemented on time, safety and in accordance with the customer requirements

7. Participate in final inspection and collection the data for as built drawings.

8. The position is accountable for strictly complying with CEEC’s Code of Ethics.

9. The position is accountable for implementing assigned responsibilities and activities to attain EH&S goals and objectives and complying with EH&S policies, applicable rules, procedures, and regulations.

III- Qualifications & Competencies

The incumbent should possess:-

1- a degree in Mechanical or Electrical Engineering is required/preferred.

2- a minimum 1 years of Project Management knowledge, skills, experience.

3- Knowledge and experience in any kind of engineering management, problem solving, strong systematic and analytical thinking skills, strong knowledge of commercial terms and conditions, working within an ISO 9000 quality environment, strong coaching, influential and negotiation skills.

4- Good English communications and computer competencies.

5- Adaptability, Analytical Thinking, Teamwork, Communications, Listening and Ethics.

6- Experience in Process projects (Oil&Gas, water treatment, WTE etc) is preferred.

Additional Information

Career Level:Junior Executive

Qualification: Diploma or ITE

Years of Experience: 3 years

Job Type: Full-Time

Job Description & Requirements

• Reviews tender documents including drawing and business documents to understand project details and curtain wall technical requirements
• Quantity take-off and calculate curtain wall system for each project
• Indicate the curtain wall contract work scope on the floor plan, elevation and curtain wall detail drawings
• Sourcing materials and send quotation inquiries to the vendors and subcontractors, comparison of quotes, review of prices, to ensure comply to tender requirement
• Evaluate of quotation and costing summary for approval prior tender submission
• Prepare procurement and sub-contract schedule
• Ensure submission of bonds / warranties from sub-contractors
• Prepare report of cost summary
• Other ad-hoc duties as assigned

We are looking for an experienced and proactive Senior Network Analyst to join our team. In this role, you will be responsible for ensuring the smooth operation, security and reliability of our network infrastructure. You will work closely with internal teams and external vendors to support business operations, resolve technical issues and implement network improvements.

Duties and Responsibilities

• Move inventory and materials across facilities
• Process inventory for delivery
• Sort, organize and store inventory in the proper location
• Package items and label correctly
• Delivered items and ensure quality
• Report damaged or missing inventory to supervisors
• Stack and organize large bulk items
• Remove inventory from trucks or shipping and delivery to proper location
• Update logs and documentation for inventory processing
• Move materials from facilities to workstations, pick-up locations, or other locations
• Wear safety gear at all times
• Operate heavy machinery like forklifts to move or store inventory
• Ensure workspace is free of debris and remove safety hazards from aisles
• Work as an active team member to complete team goals
• Prepare documentation and inventory for audits

Requirements and Qualifications

• Verbal and written communication skills
• Able to work in a fast-paced environment
• Familiarity with (ERP) system, and able to upload data into the company system
• Able to work independently
• Pays attention to detail and monitors the quality of inventory
• Highly organized and able to store items efficiently
• Computer literate, with excel skills/abilities

Job duties:

· Applies protective coats of paint, varnish, lacquer, and/or other related materials to interior and exterior surfaces of steel/metal structures.

· Washes, scrapes, sands, torches, and/or smoothes interior and exterior surfaces prior to painting, varnishing, lacquering or applying other related materials.

· Cleans equipment, paint mixing area, and work area.

· Operates sandblasters, spray equipment, other small power equipment and lifting equipment.

· Applies paints, stains, surface preparatory materials, and undercoating materials to a variety of surfaces, as appropriate, and according to Materials Safety Data Sheets ensuring compliance with hazardous materials guidelines.

· Identification, safe handling, and appropriate disposal of paints, stains, preparatory and undercoating materials and other hazardous materials.

· mixes paints and other solutions and monitors drying to ensure desired results.

· Follows all required safety procedures.

Knowledge, Skills and Abilities:

· Knowledge of the tools, equipment, materials, and application techniques common to the painting trade.

· Knowledge and skill in hazardous materials handling, application, and disposal.

· Skill in the preparation and application of paints, stains, and surface preparation for materials

Requirements:

· Proven experience as a painter.

· Knowledge of painting material and how to select, mix and apply them.

· Aptitude in using appropriate tools.

· Good basic math skills.

· Conscientious with great attention to details.

- To assist engineers and department supervisors on purchasing for various projects and workshop tooling, hardware and miscellaneous purchases

- Follow up on the process and delivery including quality control

- Liaising with suppliers on price and delivery negotiations

- Manage deliveries to confirm compliance with projects

- Monitor stocks level and verify purchase requisition

- Assist in implementing ERP system to production floor and inventory control

- To overseas and control storage of all inventories

- ISO related matters and audits

We are looking for a Quality Assurance Engineer to ensure that all products and processes meet customer, regulatory, and internal quality requirements. The role involves inspection, documentation, root cause analysis, and continuous improvement activities within a mechanical manufacturing environment.

Key Responsibilities

• Implement and maintain quality control procedures in accordance with company and customer requirements
• Conduct incoming, in-process, and final inspections of mechanical parts and assemblies
• Review and approve inspection reports, route cards, and quality records
• Handle non-conformance (NCR), corrective and preventive actions (CAPA)
• Perform root cause analysis and support improvement initiatives
• Support customer audits, internal audits, and supplier audits
• Liaise with production, engineering, and suppliers on quality issues
• Ensure compliance with ISO / customer quality standards and drawings

Requirements

• Diploma or Degree in Mechanical Engineering or related field
• Minimum 3 years of experience in Quality Assurance within a manufacturing environment
• Knowledge of mechanical drawings, GD&T, and inspection tools (e.g. vernier, micrometer, CMM is an advantage)
• Familiar with quality systems such as ISO 9001 / AS9100 (advantage)
• Strong problem-solving and communication skills
• Able to work independently and as part of a team

Preferred Skills (Advantage)

• Experience in aerospace / precision engineering environment
• Knowledge of NDT, FAI, PPAP, or customer-specific requirements
• Audit experience (internal or external)

Job Responsibilities

• Ensure product and process quality meet customer and company requirements
• Perform incoming, in-process, and final inspection of mechanical parts
• Handle non-conformance reports (NCR), corrective and preventive actions (CAPA)
• Review inspection reports, drawings, and quality documents
• Support internal, customer, and supplier audits
• Work closely with production and engineering teams on quality issues

Job Requirements

• Diploma or Degree in Mechanical Engineering or related field
• Minimum 3 years of QA experience in a manufacturing environment
• Able to read mechanical drawings and use basic inspection tools
• Familiar with ISO 9001 / AS9100 quality systems (advantage)
• Good communication and problem-solving skills

Key Responsibilities:

• Software Development & Maintenance:Develop, test, and maintain custom software applications for mechanical engineering design, analysis, simulation, and manufacturing.
  Collaborate with mechanical engineers to understand their software needs and develop solutions that improve engineering processes.
  Write clean, efficient, and well-documented code in various programming languages (e.g., Python, C++, Java, or similar).
  
• Integration and Support:Integrate new applications with existing systems, such as Computer-Aided Design (CAD) software, Manufacturing Execution Systems (MES), and enterprise resource planning (ERP) systems.
  Provide technical support for software tools, troubleshoot issues, and suggest improvements to existing applications.
  
• Automation and Optimization:Automate repetitive tasks and processes within the engineering workflow, improving operational efficiency.
  Implement algorithms for data analysis, process optimization, and simulation.
  
• Collaboration & Documentation:Work closely with cross-functional teams, including mechanical engineers, IT specialists, and project managers, to ensure that applications meet project goals.
  Maintain detailed documentation of code, software changes, and user instructions to ensure smooth application usage and future scalability.
  
• Training & Troubleshooting:Provide training to engineering staff on new software applications or updates.
  Troubleshoot and resolve software and application-related issues in a timely manner.
  

Job Requirements:

Education:

• Other Advanced Diploma / Post-Diploma qualifications or equivalent
• Additional certifications in programming, software development, or mechanical engineering applications are a plus.

Experience:

• Minimum 2-3 years of experience as an applications programmer or software developer, preferably in a mechanical engineering or manufacturing environment.
• Experience with developing applications for engineering software such as CAD, CAM, CAE, or similar systems is highly desirable.
• Familiarity with scripting for automation and integrating software with engineering tools and systems.

Technical Skills:

• Proficiency in programming languages such as Python, C++, Java, or MATLAB.
• Strong knowledge of databases (SQL, NoSQL) and data management.
• Experience with version control systems (e.g., Git, SVN).
• Understanding of engineering principles, mechanical design processes, and product lifecycle management.
• Familiarity with engineering tools such as SolidWorks, AutoCAD, ANSYS, or similar software is a plus.
• Strong problem-solving skills and ability to translate engineering requirements into practical software solutions.

Soft Skills:

• Excellent communication skills, both written and verbal, to work effectively with technical and non-technical teams.
• Strong organizational and time-management skills, with the ability to prioritize tasks and manage multiple projects simultaneously.
• Ability to work independently and as part of a team.
• Attention to detail and a commitment to delivering high-quality work.

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 processes.
• conducts Design Reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Operations Manager

QUALIFICATIONS & EXPERIENCE:

• Diploma or Degree in Mechanical / Manufacturing Engineering or an equivalent degree in related technical field desired
• 3 to 5 years relevant experience in mechanical engineering and material handling systems across various industries.
• SolidWorks or AutoCAD experience desired
• Knowledge of design techniques, tools, and principle involved in production of precision technical drawings, and models
• Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to design and production
• Knowledge of design principles, steel and aluminum part creation, sub assembly and pneumatics.
• Ability to work independently in designing and liaising with customers on technical specifications and requirements
• Participate in and effectively communicate in group discussions and meetings
• Ability to work well in a team environment

Overall Purpose of Job:

Able to assess engineering problems and develops pragmatic solutions to resolve engineering related issues for shipboard Automation projects, and to ensure the designs are in accordance to contractual specifications and marine classification requirement.

Responsibilities:

• Responsible for all automation related design, platform system integration and interface with the Ship Management System (SMS) and platform system related control and monitoring and logics, which includes basic and detail design :

• • SMS architecture
  • SMS functional description
  • I/O list
  • Integration of third party equipment / system with SMS
  • Conduct integration reviews with vendors and client
  • Control console design and control panel arrangement
  • Control room arrangement layout
  • Platform system automation design, system control and monitoring

• Responsible for ship safety and surveillance related systems, which includes:Propulsion control systemDynamic positioning systemCCTV systemFire Detection SystemHarbour Duty Surveillance System
• Review vendors technical proposal to ensure it meets the requirement
• Responsible for ensuring the Contractual technical requirement and Classification requirement of automation related design are fulfilled and within project schedule
• Liaise with client, internal engineering trades and vendors for project coordination
• Technical review and meetings with client and vendors during project execution to ensure requirement are fulfilled, provide solutions and resolve technical issues.

Other features of job (Shift or night work, travel, working conditions)

• Attend to local or oversea travels/deployment for project work (where required)
• Attend Sea Trials for a specified period (Where required)

Knowledge & Skills:

• Knowledge of Marine Electronics and Automation systems
• Knowledge in computer networking, control instrumentation and control system design
• Knowledge of standard communication protocols like Modbus RTU/TCP, Prrofibus, RS422, RS485, NEMA, CANbus, J1939
• Knowledge in Autocad, Naviswork, AVEVA model software
• Good Interpersonal Skills, problem solving skills and is a team player
• Good time management and able to meet tight deadlines

Experience

• Working experience in Automation or Marine Industry

Education, Qualifications and Special Training

• Degree in Electrical, Automation, Mechanical Engineering

Personality Traits

• A team player who is also an independent thinker and doer, with effective interpersonal skills, organised and able to multi-task
• Deadline driven, able to work within tight timeline/schedule
• Strong verbal, written and presentation skills are important

Other Information:
 

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

The Climate Transformation Programme (CTP) aims to develop, inspire and accelerate knowledge-based solutions and educate future leaders to establish the stable climate and environment necessary for resilient, just, and sustainable Southeast Asian societies.

CTP will generate knowledge and innovation across disciplines including climate and Earth science, ecology, materials science, artificial intelligence, humanities, social sciences and the arts, finance, health, and engineering. It will also translate state-of-the-art scientific results into real world solutions for Singapore, and it will transfer these solutions to Southeast Asia (SEA) and beyond.

As part of this programme, Research Cluster 4: Novel engineering solutions for climate impacts, will explore engineering solutions to adapt to sea-level rise and climate-constrained water resources. The CTP research programme is summarised here: https://earthobservatory.sg/research/climate/climate-transformation-programme>.

The Research Fellow will be based in School of Civil and Environmental Engineering (CEE) and will be expected to work effectively for advancing the engineering solutions to mitigate the climate change impact which focus on new design concepts for seawalls and coastal defence systems. The position is expected to perform independent and collaborative research to meet the project objectives, to develop new solutions, to assist the management work of the project’s daily operation to facilitate the success of the project, and to publish high-quality journal papers to promote the international reputation of the university,

Key Responsibilities:

The Research Fellow will be responsible for:

• Conduct in-depth research on flexible seawall design and construction, considering durability, environmental impact, and cost-effectiveness.

• Conduct laboratory experiments to test the performance of flexible seawall in flume test.

• Perform numerical study of the model test. Analyze and interpret data to make informed recommendations for costal protection system design and optimization

• Writing and publication of results in high-quality peer-reviewed journals

• Writing project progress reports

• Assist in the daily project operation management.

Job Requirements:

• PhD degree in civil engineering, coastal engineering, ocean engineering or related field

• At least 1 year of relevant experience in coastal structure foundation design and hydrodynamics analysis

• Strong background in hydrodynamics analysis

• Expertise in laboratory coastal structure testing

• Expertise in FEM software (Ansys, Abaqus, Plaxis, Comsol etc.)

• Good written and oral communication skills

• Proficiency in oral and written English - essential for data analysis and communication with stakeholders

• Publication track record is an advantage

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Responsible for the development of ILS deliverables of the ship maintenance programme that meets the customer's requirements effectively and on time.
• To support the department in designing and implementation of the ILS plan for delivering technical documentation, training and ILS data to customer.
• To support the department in designing and implementation of the ILS plan for determination of Spares and subsequent purchase and logistics arrangements for delivery to customers on time.

Requirements:

• Diploma/Degree in Marine or Mechanical Engineering related
• Prior knowledge of Mindef ILS (Integrated Logistics Support) methodology will be an advantage
• Knowledge and Work experience in maintenance management program for marine vessels is desirable
• Knowledge of maintenance planning software and methodology is desirable
• Comfortable with technical documentation work
• High proficiency in MS Office Suite
• Good written, verbal communication skills in English is required
• Must possess the ability to go on board vessels occassionally when required
• Occassional lifting and carrying of physical documents or parts is required
• Only Singapore Citizen wiill be considered for this role

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Job Description

• Full Set of Accounts: Maintain accounts payable (AP), accounts receivable (AR), and general ledger (GL).
• Reconciliation: Reconcile bank statements, supplier accounts, and resolve billing discrepancies.
• Closing Activities: Execute month-end and year-end closing processes and prepare trial balances.
• Compliance & Tax: Assist with tax computations, GST submissions, and preparing documents for annual audits.
• Payroll & Admin: Process monthly payroll and compile financial data for management.

Requirements

• Education: Diploma or Degree in Accounting, Finance, or a related field.
• Experience: 1–3 years of hands-on corporate or professional services accounting experience.
• Technical Skills: Proficiency with accounting software (e.g., Xero, QuickBooks, SAP) and strong data analysis capabilities.
• Soft Skills: High attention to detail, strong organizational skills, and strict adherence to confidentiality.

Roles & Responsibilities

1. Handling full set of accounts –A/R,A/P,Cash Book, Journal(MYOB).

2.Prepare and process payments through electronic transfers, or other means

3.Prepare and submits GST on a quarterly basis.

4.Prepare Balance Sheet & Profit & Loss Schedules.

4.Liaise with external auditors, statutory bodies, company secretaries, and banking matters

5.Any other Accounting matters.

Requirements

1.At least 3 year(s) of working experience in the related field.

2.Ability to work independently and resourcefully in a fast-paced environment.

3.Applicants must be familiar with MYOB or similar accounting software.

4.Working hour : 8:00a.m. to 5:00pm; Monday to Friday

Job Description

• Assist in preparing project tender submission including bills of quantities, check tender drawing and material specifications,
• Prepare and submit the shop drawing & other required documents
• Prepare and submit monthly progress claims, variation orders (VO), and finalize accounts
• Assist with quantity measurements and cost estimation
• Liaise with Managers, Team Members, Customers, Sub-Contractors, and Suppliers
• To attend site meeting and progress claim meeting
• Assist in the preparation and closing of final accounts

Qualifications

• Diploma/Bachelor's Degree in Quantity Survey, Engineering (Civil) or a related field
• Minimum 3 years of relevant experience
• Candidate with adequate experience may be considered for senior role
• Ability to work independently and under pressure to meet deadlines
• Proficient in Microsoft office tools and AutoCAD

Purpose of Role:

Assist in the development of ILS deliverables for ILS programmes that meets customer requirements efficiently and on time.

Responsibilities:

• Responsible for data entry and document assembly or extraction.
• Creating and populating data into templates for codification
• Processing and doing MMD data entry into software system • May be required occasionally to be at external site to assist for coordination of delivery of items to store
• May be required occasionally to be at external site for coordination of training
• Occasional lifting and carrying of documents or parts is required.

Requirements:

• Good proficiency in MS Office Suite
• Experience in Document Control for engineering projects will be advantageous
• Good written, verbal communication skills in English is required
• Able to interact effectively with all levels of staff both internally and externally
• Able to work independently
• Willing to commit to 2 years contract

Additional Information:

• Location: 16 Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Job Summary

Produce detailed shop and as-built drawings for metal or interior fitting-out fabrication projects, ensuring technical compliance and coordination with engineers and project teams to support accurate manufacturing and production.

Responsibilities

• Translate engineer sketches and specifications into detailed 2D and 3D manufacturing drawings for fabrication teams
• Ensure all drawings comply with industry standards, material constraints, and safety regulations to maintain quality and safety
• Update and revise drawings based on feedback from engineers, project managers, and clients to reflect project changes accurately
• Prepare and manage Bills of Materials (BOM) using ERP systems to support production planning and material procurement
• Utilize software tools such as AutoCAD, SolidWorks, proficiently to create and modify technical drawings

Required competencies and certifications

• Diploma in Mechanical Engineering, Design, or equivalent
• 1–5+ years of experience in manufacturing, ACMV, or fabrication environments

We are seeking a dynamic and results-driven General Manager to lead our ERSS (Earth Retaining & Stabilization Systems) and Scaffolding operations. This is a senior leadership role for a seasoned construction professional ready to drive growth, operational excellence, and project delivery at the highest level.

About the Role

You will have full oversight of the ERSS and Scaffolding business units — from business development and project execution to workforce management and P&L accountability. You'll work closely with director, project teams, and key clients to position the company as a market leader in Singapore's construction landscape.

Key Responsibilities

• Lead and manage all ERSS and scaffolding operations, ensuring projects are delivered safely, on time, and within budget
• Drive business development — identify new opportunities, build client relationships, and secure contracts
• Oversee tendering, contract negotiations, and project planning processes
• Direct and mentor a multidisciplinary team including engineers, supervisors, and site personnel
• Ensure full compliance with MOM, BCA, and WSH regulations and safety standards
• Manage P&L, budgets, cost controls, and resource allocation across projects
• Develop and implement operational strategies aligned with company goals
• Liaise with main contractors, consultants, government bodies, and stakeholders
• Monitor KPIs, project performance, and continuously improve processes
• Represent the company at industry events, client meetings, and regulatory engagements

Requirements

Experience & Qualifications

• Minimum 15 years of experience in the Singapore construction industry
• Proven track record in ERSS works (sheet piling, soldier piles, ground anchors, struts) and/or scaffolding systems
• At least 10 years in a senior management or leadership role
• Degree or Diploma in Civil Engineering, Structural Engineering, or Mathematic with science
• BCA-registered or relevant professional accreditation is an advantage

1. Responsible for project administration, budgets, manpower planning, scheduling, Tender Preparation, Project Kick-off and meeting delivery schedule

2. Ensuring the project is administered and executed to the satisfaction of the Client in accordance with contractual agreements and safety standards and compliant with the company policies and procedures

3. Responsible for the development, approval and implementation of the Project Management Plan, Project Start-Up and Project Close-out till warranty closure

4. Responsible for documenting and reporting project deliverables

5. Liaises and communicates with the client on project status, progress and changes

6. Administration of the project contract to ensure compliance with set performance targets, schedules and technical specifications

7. Coordinate with subcontractors on the project and ensure timely deliver

8. Review project documents before issuing to clients and coordinate with clients, classification society, suppliers and subcontractors

9. Ensure that all standard operating procedures comply with specifications, quality standards,

statutory and regulatory requirements

10. Maintain good report with customers by providing relevant technical support

11. Adopt and be updated with the latest technology in improving inspection accuracy and the reliability of data

12. Identify, analyse, highlight and report all equipment-related integrity failures or degradation problems

13. Develop and recommend eéective mitigation solutions/ corrective actions in accordance with the safety and regulatory requirements

14. Conduct failure analysis inspection/reliability data & develop an improvement plan.

Requirements:

· Diploma in Engineering or Equivalent

· Be able to assist the construction team on the field whenever required.

· Be able to work flexibly after office hours due to project requirements

· Able to assist the team in eliminating construction issues

· Strong communication skills for contractor and customer management

LOOKING FOR SPRAY PAINTER! *Experience required*

*NIGHT SHIFT REQUIRED- with night Shift allowance*,

NEED TO BE ABLE TO WORK ON WEEKENDS/PH

Job Description

- Ensure facility and spray painting equipment are in goodworking condition

- Utilize spray gun and apply paint in conformance with allspecifications

- Employ heat or oven paint drying techniques for specialpurpose finishes

- Follow company requirements to select paint, and matchcolors of paint following specified color charts

- Responsible for material and minor maintenance.

- Working Hour : 8AM - 5PM (Morning Shift)

: 8PM - 5AM (Night Shift)

Job Responsibilities:

• Answer phone calls and handle customer enquiry.
• Assist in preparing quotations and order processing.
• Monitor delivery and liaise with customers.
• Follow up on enquiries and on time payment by customers.
• Maintain good rapport and improve good customer relations.
• Ensure all enquiries and orders are processed, checked,documented and filed.
• Any ad hoc duties as assigned.

Requirement:

• N level / O level / Nitec / Higher Nitec in any discipline or at least 2 years working experience in similar role
• Candidate with Engineering or Technical background will be preferred
• Proficient in Microsoft Office
• Attentive to details, effective follow up skills and customer oriented mindset
• Good interpersonal and communication skills
• 5 working days per week
• Working location : Joo Koon

Interested candidate please email your detailed resume with current and expected salary cheryllou@kimann.com

Job Responsibility

1. Product Development & Transition

• Serve as the main point of contact between design and manufacturing teams during the product development lifecycle.
• Review product designs to ensure manufacturability (DFM) and compliance with industry standards.
• Develop and oversee pilot production runs to validate production processes and workflows.

2. Process Development & Optimization

• Establish robust manufacturing processes for new products, ensuring scalability and efficiency.
• Identify potential production issues and provide engineering solutions to mitigate risks.
• Work with suppliers and vendors to ensure quality and timely delivery of materials.

3. Project Management

• Develop and manage project plans for NPI activities, including schedules, budgets, and resource allocation.
• Monitor progress against key milestones and provide regular updates to stakeholders.
• Coordinate cross-functional teams to address challenges and meet project objectives.

4. Quality Assurance

• Collaborate with the Quality team to define inspection criteria and ensure new products meet quality standards.
• Conduct root cause analysis for non-conformance issues during pilot and initial production runs.
• Support the creation of process documentation, such as standard operating procedures (SOPs) and work instructions.

5. Continuous Improvement

• Drive initiatives to improve product design and manufacturing efficiency.
• Implement lessons learned from previous NPIs to refine future processes.
• Evaluate and adopt new technologies to enhance production capabilities.

Job Requirement

• Bachelor’s/Master’s degree in Mechanical Engineering, Precision Engineering, or a related field.
• Strong understanding of machining processes (CNC machining, turning, milling, etc.).
• Expertise in jig and fixture design using CAD software.
• Strong knowledge of manufacturing processes, including machining, assembly, and automation.
• Strong leadership and team management capabilities.
• Excellent problem-solving and decision-making skills.
• Effective communication and coordination with diverse teams.
• Familiarity with process validation tools(FMEA, control plans, statistical analysis).
• CAD /CAM /Design Knowledge Essential.
  Solidworks knowledge will be advantage
• Ability to work independently and as part of a team.
• Problem-solving and analytical skills.
• Office software skill Excel & Power Point etc.
• Strong knowledge of safety regulations and best practices.

Job Description & Requirements

JOIN NOW, Kim Ann Engineering's Management Trainee Programme!

We are seeking dynamic, ambitious and talented individuals to become part of this vibrant challenging role!

Being a management trainee, you will embark on a comprehensive 2-year development journey, which comprises of hands-on experience, real life problems solving,inter-functional co-ordination and many more exciting roles to fill.

Through the attachment across various departments, you will get an all-round personal development roadmap and skills training awareness with the function you are with. It spans from sales, customer service, operations, quality assurance and supply chain management.

This program is curated to cultivate future leaders for the Company by providing mentorship, rigorous on-the-job training and real-world challenges. If you are passionate about mechanical engineering, material science and how things work, APPLY NOW and take your first step towards a rewarding career with Kim Ann!

Job Description

-Participate in departmental rotations to gain a comprehensive understanding of our operations.

-Collaborate with cross-functional teams on different projects and initiatives.

-Learn and apply the best practices in engineering , manufacturing , quality assurance, sales and more.

-Analyze data, generate insights and contributes to continuous improvement efforts

-Take on increasing responsibility as you progress through the programme.

-Develop a managerial skill and leadership through structured training programme

Requirements:

- Bachelor Degree in Metallurgy, Material Science or Mechanical Engineering.

-Strong problem solving and analytical skills

-Excellent communication and interpersonal skills

- Strong organisation skills and able to handle multiple task effectively.

Job Description

We are seeking a highly motivated and experienced Project Manager / Project Director to lead, manage, and oversee project operations from planning through completion. The successful candidate will be responsible for ensuring projects are delivered on time, within budget, and in accordance with quality, safety, and regulatory requirements.

Key Responsibilities

• Lead project planning, execution, monitoring, and completion.
• Develop project schedules, budgets, resource plans, and implementation strategies.
• Manage project teams, subcontractors, consultants, and suppliers.
• Coordinate with clients, stakeholders, and regulatory authorities.
• Monitor project progress and ensure timely delivery of project milestones.
• Identify and mitigate project risks and issues.
• Manage project costs, procurement activities, and contract administration.
• Ensure compliance with company policies, industry standards, and statutory regulations.
• Prepare project reports, presentations, and documentation for management review.
• Provide leadership, guidance, and mentorship to project team members.
• Build and maintain strong client and stakeholder relationships.
• Support business growth and strategic project initiatives.

Requirements

• Bachelor's Degree in any field, Construction Management, Business Administration, Project Management, or a related discipline.
• Minimum 5 years of relevant experience for Project Manager level.
• Minimum 10 years of relevant experience for Project Director level.
• Strong leadership and project management skills.
• Excellent communication and interpersonal skills.
• Proven ability to manage multiple projects and stakeholders.
• Strong analytical, problem-solving, and decision-making abilities.
• Proficiency in Microsoft Office and project management software.
• Professional certifications such as PMP or equivalent will be an advantage.
• Able to workday or night shift.
• Willing to work 6 days

Send your resume to: royalsuneng@gmail.com
Contact: +65 6896 5341