Total 1,755 job vacancies in Singapore

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team, ISP Design leaders in other sites, and Digital System Design Team
• Leading, supervising and mentoring a team of RTL design engineers

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 7+ years of Digital Design and verification related experience
• 3+ years project management / people management experience / skill
• Experience / knowledge in CMOS Image Sensor and image signal processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Ability to lead teams and collaborate effectively with people in different functions
• Strong time management skills to ensure timely completion of deliverables
• Good communication and interpersonal skills
• Results-oriented and adaptable to changes

Key Responsibilities Key Responsibilities

RTL Design and Verification

• Develop synthesizable RTL in Verilog/SystemVerilog for custom on-chip test, monitoring, and diagnostic IP targeting analog and mixed-signal failure detection.
• Design and verify digital logic blocks such as test controllers, sequencing logic, sensor/interface control logic, measurement and monitoring logic, data capture and comparison logic, and failure detection and reporting logic.
• Build clean register and bus-connected interfaces, for example APB, AHB, or AXI-lite based control and status paths, to enable firmware interaction and subsystem integration.
• Develop testbenches, assertions, checkers, and block or subsystem-level verification environments to validate controller behavior, detection logic, configuration programming, fault response, and status reporting.
• Plan and execute functional verification for normal, corner, negative, and fault-injection scenarios, with adequate coverage of critical diagnostic behaviors.
• Collaborate with analog and mixed-signal designers to create or use behavioral models, stubs, and interface abstractions for realistic verification of failure mechanisms and observability paths.
• Debug RTL and simulation issues through waveform analysis, assertion-based checks, root-cause investigation, and close interaction with integration and product teams.
• Ensure the RTL is modular, reusable, timing-aware, synthesis-friendly, and scalable for integration across multiple SoC derivatives.

SoC Integration

• Integrate custom DFT / diagnostic IP into SoC subsystems and system-level test architecture with proper consideration for clock/reset structure, interrupt handling, and status visibility.
• Work closely with SoC integration and DFT teams to ensure compatibility with system test infrastructure, production test flows, diagnostic mechanisms, and firmware control requirements.
• Support integration readiness by addressing CDC, reset interactions, timing considerations, low-power implications, and implementation handoff requirements.

Cross-Functional Collaboration

• Work closely with digital, analog, and mixed-signal design teams, DFT engineers, SoC architects, and product/test engineering teams throughout the design and validation cycle.
• Translate analog or mixed-signal failure modes into robust digital detection logic suitable for on-chip test, screening, and diagnosis.
• Contribute to technical discussions on architecture tradeoffs, observability strategy, and practical silicon debug readiness.

Required Qualifications

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field, with 5–7 years of relevant experience.
• Strong hands-on experience in RTL design using Verilog/SystemVerilog.
• Practical experience in RTL verification, simulation, and debugging methodologies.
• Solid understanding of ASIC / SoC design flow including coding, simulation, synthesis, and integration.
• Good foundation in digital design concepts such as FSM design, datapath design, bus protocols (AXI/AHB/APB), clock-domain handling, reset strategy, and timing considerations.
• Experience working in complex SoC environments with cross-functional teams.

Preferred Qualifications

• Experience developing control, monitoring, or diagnostic IP associated with analog or mixed-signal subsystems.
• Exposure to behavioral modeling or interface definition for analog and mixed-signal verification use cases.
• Familiarity with subsystem-level integration, production screening considerations, and silicon debug support.
• Working knowledge of scripting or automation for verification, regression, or design productivity is an advantage.

Responsibilities

1. Develop design requirements for an NPU based on system-level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug any issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 5+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on experience in digital design is a must.
4. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
5. Experience in synthesis, with analysis of power, timing and area.
6. Disciplined, quality-minded, and highly driven for excellence.
7. Excellent team player and good communication skills.
8. MSEE/BSEE in Electrical Engineering or Computer Engineering.
9. Understanding of convolution operator and number system is required.
10. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
11. Experience in UVM verification methodology is a plus.
12. A plus to have SoC design experience.
13. Experience with optimizing micro-architectures for low-power and low-area is a plus.
14. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
15. Experience with past design experience with NPU / GPU / DSP design is a plus.
16. Experience with ARM or RISC-V processor systems is a plus.
17. Passionate and strong in general programming is a plus.

Find Out Even More At: https://tinyurl.com/biz-operations-intern-mindflex

Office Location: 28 Sin Ming Lane, Midview City (Bright Hill/Marymount/Bishan MRT)

Quick Apply: You may send your Resume/CV to recruitment@singaporetuitionteachers.com or apply via MyCareersFuture.

Hi! Our company is looking for University/Polytechnic Interns who are able to commit for a Full-Time Internship of 3 Months & Above (longer durations preferred).

About Us:

• MindFlex Education's internship programme aims to provide internships that are fulfilling, as well as practical in real-world situations
• Our office culture is fun and encouraging. We take our work, as well as our play seriously
• We provide full-time job opportunities for interns who have excelled in their internship
• Enjoy a cosy office environment with modern facilities such as a PS5, pool table, karaoke system & more
• Close-knit team of 15-25 pax, strictly no over-time culture, no bring-work-home culture
• Attractive part-time positions ($14/Hour & above) and full-time positions available after completion of internship

Learning Scope:

Client Relations

• Take charge of handling tuition requests via Forms, Social Media Platforms & WhatsApp
• Ask clients the right questions to gather information efficiently
• Address clients' queries and concerns that they might have
• Transfer clients' requirements into a concise job-post format
• Provide after-sales service to clients (and tutors)
• Monthly check-in on existing client base for any feedback, staying connected and maintaining good relations with them

Tutor Relations:

• Broadcasting assignments via automated outreach channels (Email, Telegram, etc.) to our database of 50,000+ tutors
• Apply filters (eg. Location, Tutor Type, Qualifications) to tag each assignment to the correct target audience
• Assist in shortlisting, profiling, and marketing tutors in a way which captures the client's attention based on their needs
• Assist tutors with technical issues & application processing
• Clarification of agency's commission & policies to tutors

Business to Business (B2B):

• Take charge of MindFlex's B2B arm and work with tuition centres, government agencies & educational institutes.
• Schedule interviews (phonecall, online, face-to-face) between tutors and organisations
• Manage confirmation contracts & invoices for clients
• Provide after-sales service to clients (and tutors)

Internal Processes:

• Work with customised back-end software, specially designed to fulfil the company's business needs & improve efficiency
• Maintain cohesive inter-department and intra-department relations, ensure good customer handover between colleagues
• Take charge of designating clients to various teams (traffic control), depending on each team's existing workload
• Maintain an organised record of clients for different departments to contact and follow-up with in future

Other Administrative Or Ad-hoc Tasks Related To Marketing Or Business Development:

• Analyse company's past data, to forecast trends and assist in Business Development plans
• Creation of content and visuals, and organising data to grow the company’s online presence and improve SEO
• Participate in team huddles in strategy building for the company's operations, process streamlining, automation and new revenue streams

Key Takeaways:

• Hone fast-thinking abilities and good decision-making skills
• Build professional communication and customer service skills
• Develop confident problem-solving and mediation skills
• Learn to stay organised, meticulous and calm in a fast-paced environment
• Become an effective team-player and an independent worker
• Witness firsthand how SMEs create their own in-house software and solutions (from conceptualistion to development to usage)
• Deep involvement and familiarisation in both back-end and front-end processes of the company & industry
• Exposure to real-world data and applications, that puts theory into practice
• Last but not least, private mentoring & sharing sessions with company's founders and management (P.S. we love sharing)

Job Requirements:

• Current University/Polytechnic Student, Singaporean/PR
• Good Command of Both Written & Verbal English
• Friendly, Passionate and Energetic Team Player
• Organized and Good Administrative Skills
• Responsible and Strong Work Ethic
• Decent Typing Speed and Computer Skills
• Polite, Patient and Calm Personality

Location & Working Hours:

• Location: Sin Ming Lane, Midview City (Near Bishan/Marymount MRT)
• 4 Weekdays, 1 Weekend, 9.00am - 6.30pm
• (Working days of your choosing & mutually agreed with the company)
• Strictly No Overtime and No Bring-Work-Home Culture

Internship Allowance:

• $1,300/Month

Why Choose Us:

• Fun Company Culture and Working Environment
• Casual Working Attire, Relaxed Setting
• Close-Knit Team of 15-25 Pax
• Office with Modern Facilities (Pool Table, Playstation 5, Karaoke Set, Board Games, etc)
• Company Meals / Outings / Events / Bonding Activities
• Many of our interns have also converted to full-time & contract positions after their internship as they thoroughly enjoyed their learning experience with us
• New Bright Hill MRT at Doorstep

Application:

• Submit an e-mail application with Resume/CV to mindflex.recruitment@gmail.com with Email Title "Internship Application"
• Please ensure to include the following in Email and attached documents:

1. Earliest Available Start-Date for Internship

2. Available Duration for Internship

3. Is Undertaking The Internship for A Course Requirement, or Self-Improvement

Others:

• Shortlisted candidates will be contacted for a short interview over Zoom or Face-to-Face
• Signing of Non-Compete contract will be required upon successful selection

Our client, an well-established local MNC in commercial Air-Con industry is seeking for ACMV Manager (Design) Facility Manager / Operations Manager ( Commercial Building / Retail Mall ) - Salary: $ 7,000.00 to $ 9,000.00 + VB / 5 days work week

Requirements

• Degree in Mechanical Engineering or Electrical Enigneering or relevant

• At least 5 to 8 years of experience in designing and optimising efficient, cost-effective chiller plant and airside systems to support both project acquisition and delivery.

• At least 5 to 8 years of experience overseeing a team of Engineers and Technicians to run daily operation in either Industrial plant or Commercial Office or Retail shopping mall

• Experience in Regional / Asia coverage

• Strong in ACMV design, analytical, and problem-solving skills

• Mandatory certifications: BCA Energy Auditor, GMAP/GMAAP, SCEM

• Good communication, analytical skill and stakeholder management skill

• Independent, confident and leadership qualities

Others

• Salary: $ 7,000.00 to $ 9,000.00

• 5 Days work week (Monday to Friday), office hour
  

Interested candidate can send in your resume (word format prefer) to grayson.su@thetalentnetwork.com.sg

The intern will have the exciting opportunity to support the team in one or more digital transformation and automation projects to create Bots/ implement RPA to enhance and streamline the Career Conversion Programme Workstreams.

This role provides hands-on experience in process improvement methodologies. He/she will learn the fundamentals of automation design, stakeholder engagement, and digital solution development whilst gaining valuable exposure to government operations and process optimisation.

Responsibilities include:

A) Knowledge Management (KM) System Development

- Design and implement a KM repository using available digital tools.

- Support the team to develop processes and workflows to gather, curate and maintain the struture for the KM system.

- Assist in creating documentation and user guides for KM processes and tools.

B) Automated Budget Tracking Solutions

- Implement RPA to enable efficiency in budget tracking.

- Engage stakeholders to understand budget tracking requirements.

- Design and test the automated solutions that enhance accuracy, reduce processing time, and improve financial oversight.

C) AI-Powered Digital Proposal Assessment Tool

- Develop bot capable of evaluating and scoring proposals using advanced algorithms and criteria to assess proposals

- Collaborate with stakeholders to understand painpoints and improvement opportunities in current proposal development process

- Work with divisions to develop bot to drive efficient proposal evaluations

Requirements:

- Strong analytical and problem-solving skills

- Excellent attention to detail and organisational abilities

- Proficiency in MS Office suite (include SharePoint), RPA and AI tools

- Good written and verbal communication skills in English

- Experience with data visualisation tools e.g. PowerBI is a plus

Location: Kaki Bukit
Salary: $4,000 – $5,000
Working Hours: Monday to Friday, 8:00 AM – 5:30 PM
Industry: Semiconductor

Key Responsibilities:

• Design and develop precision tooling, jigs, fixtures, and mechanical components
• Prepare detailed 2D and 3D drawings using AutoCAD and SolidWorks
• Work closely with production and engineering teams to ensure design feasibility and manufacturability
• Modify and improve existing designs based on project requirements
• Ensure all designs meet technical specifications and industry standards
• Support prototyping, testing, and troubleshooting activities

Requirements:

• Diploma or Degree in Mechanical Engineering or related field
• Proven experience in precision engineering and/or semiconductor industry
• Proficient in AutoCAD/ SolidWorks
• Strong understanding of tooling design and mechanical components

To apply, please click on “Apply Now” or email your latest resume to dorothy@recruitlync.com / WhatsApp 85017683.

Ooi Shi Hui Dorothy (R1762852)
Recruit Lync Pte Ltd (22C1000)

Responsibilities:

• In charge of establishing the process and work in the team to implement risk management best practices in projects
• Implement and maintain the office's ISO 13485 and IEC 62304 compliant quality management system processes and procedures across departmental work and projects.
• Responsible in providing guidance and development support to the projects handled
• Taking charge of validating and advising project teams on regulatory, quality and risk requirements
• In charge of implementing and maintaining ISO 13485 and IEC 62304-compliant quality management system processes and procedures
• Responsible in
• In charge of managing project tasks which includes ensuring of timely completion of project milestones and meeting KPIs
• In charge of compliance with quality, regulatory and organisational policies and systems while supporting required record-keeping and documentation.

Requirements:

• Min Degree in Engineering /Science or relevant
• Min 2 years of working experience in QMS, Risk Management and design & development in medical industry
• Experience in ISO13485 /IEC62304 audit is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

1.       Determined appropriate construction methods, materials, and quality standards by reviewing and coordinating structural design and shop drawings to ensure compliance with project specifications and relevant codes.

2.       Drafted, interpreted, and reviewed engineering drawings, technical specifications, and construction procedures to ensure accuracy, constructability, and adherence to design intent.

3.       Coordinated with consultants, contractors, and fabrication teams to resolve technical design issues and implement necessary drawing amendments.

4.       Prepared and submitted technical documentation, including design approval requests and revised drawings, ensuring proper document control and compliance with quality management systems.

5.       Monitored design modifications, assessed their impact on construction methodology and project progress, and facilitated necessary revisions to maintain alignment with approved designs.

6.       Reviewed and checked structural design calculations provided by consultants for temporary and permanent works, ensuring operation team can met design requirements and were suitable for safe execution.

7.       Established and maintained coordination between design and site teams to support effective execution of construction activities.

8.       Provided technical support to the construction team by addressing reinforcement and structural queries raised during inspections and site activities.

9.       Maintained updated records of structural components and construction progress to ensure accurate documentation and tracking of completed works.

Job Description.:

• You need to understand the management of company operations and processes. You will need data analytics to monitor performance, identify insights, and enable data-driven in the company. You will be required to participate in the management of project processes and project timelines.

• Perform detailed scoping of the project by working closely with all functional leads – including the alignment of the workstream’s outcome, responsibilities, task lists and timelines.

• Delegating on behalf of the manager.

• Weighting in on decision-making processes by presenting reasonable, fact-based points of view.

• Carrying out specific projects or tasks as instructed by the manager.

• To handle any related administrative tasks.

Requirements

· Proficiency in MS Office (Word, Excel, Outlook and PowerPoint).

· High level of interpersonal skills in handling sensitive and confidential situations and documents.

· Proven ability to manage flexible schedules.

· Minimum 3-years management executive work experience in Singapore.

· Diploma and Bachelor’s degree in Business Management and Administrative Support are preferred.

Job Description

• Industry/ Organization Type: Design and Build Service Provider
• Position Title: 3D Designer (Commercial / Event)
• Working Location: North - Admiralty
• Working Hours: 5.5 days / Mon-Fri: 9am-6pm, Sat: 9am-1pm
• Salary Package: Up to SGD 4000 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Work closely with the creative team, sales personnel, and project owners/managers to conceptualize and design engaging and impactful experiences
• Oversee the entire design process from initial concept to final execution, transforming ideas into visually compelling and functional 3D designs
• Produce high-quality 3D renderings that clearly convey design intent and storytelling
• Apply strong knowledge of design principles, spatial planning, and user experience to develop immersive environments tailored to target audiences
• Stay updated on industry trends, emerging technologies, and best practices to deliver innovative and forward-thinking design solutions
• Participate in client presentations, effectively communicating design ideas and incorporating feedback to refine and enhance outcomes
• Collaborate with cross-functional teams including graphic designers, technical consultants, and draftsmen to ensure cohesive integration of all design elements

APPLY NOW!!!

• Min. Diploma in 3D design, industrial design, architecture, or a related field
• Min. 2 years of experience in 3D design with a strong portfolio highlighting outstanding spatial and exhibition design work
• Proficiency in industry-standard design software, including but not limited to, AutoCAD, SketchUp, Adobe Creative Suite, Rhino, V-Ray, and other relevant tools
• Training is provided to inexperienced candidate

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #79386 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

State Street Corporation is committed to fostering an environment that promotes diverse talent and global perspectives. Our Internship Platform is an integral part of our commitment to equity and inclusion by providing outstanding internship opportunities to students across our core university partnerships. Our Internship is an experiential learning initiative, designed to provide students with an opportunity to explore the dynamic culture and lively, academic atmosphere of our Markets business lines. Additionally, you’ll be provided with opportunities to undertake additional projects to broaden your understanding of the global financial markets and the clients we serve.

Program Overview

• Intern experience will include a welcome orientation to provide our newest colleagues with a comprehensive view of business lines across Markets. In addition, multiple training sessions and networking opportunities will be offered, where you’ll experience our commitment to State Street’s most valuable asset: our employees.

• Our Interns will receive continuous training and will benefit from working alongside experienced professionals on meaningful projects. Multiple opportunities will be on hand to exchange ideas and network with peers, mentors and senior leaders of the firm.

• As an intern, you will have the unwavering support of a mentor who can help you navigate the workplace and ensure you are best positioned for success

Why this role is important to us

GlobalLINK has a long history of innovation and industry leadership. As we enter the next phase of our evolution, our focus is on strengthening our leadership in the FX trading platform market while expanding our client footprint and delivering greater value‑added solutions to our existing clients. GlobalLINK is a part of State Street Markets. When owners and managers of institutional assets need research, trading, securities lending and innovative portfolio strategies, they turn to State Street Markets business unit. As our investment research and trading arm, State Street Markets’s number one goal is to enhance and preserve our clients’ portfolio values by applying technology, optimizing trading, and linking asset classes and markets across the world.

Who we are looking for

In this role, the candidate will support the GlobalLINK team in achieving its business objectives by contributing to regulatory and management reporting, driving project delivery, collaborating with stakeholders across functions, and ensuring the timely execution of key initiatives.

The candidate should be intellectually curious, eager to learn and grow, self-motivated, adaptable, and ready to take on new challenges. The role will also provide opportunities to develop and strengthen the following skills:

• Strong problem-solving ability and confidence to ask challenging questions

• Sound judgment and strong business acumen

• Excellent communication and interpersonal skills

• A keen interest in Global Markets, particularly in FX markets, Trade Cost Analysis, Money Markets Funds, etc.

• Drive to succeed and a strong work ethic

• The ability to learn quickly, multitask, prioritize, and take on new responsibilities

Responsibilities
As an intern, your responsibilities may include:

• Assist and participate in different project initiatives

• Coordinate with teams across different functions

• Support automation of reports using excel or internal tools

• Identify workflow inefficiencies and propose process improvement

• Handling day-to-day activities needs

Qualifications

• Candidates are required to pursue a bachelor’s degree from an accredited college or university

• 3.2 minimum GPA preferred

• Background in Business Management, Machine Learning or Programming is a plus

• Strong interpersonal, organizational, critical thinking, and problem-solving skills 

About State Street

What we do. State Street is one of the largest custodian banks, asset managers and asset intelligence companies in the world. From technology to product innovation we’re making our mark on the financial services industry. For more than two centuries, we’ve been helping our clients safeguard and steward the investments of millions of people. We provide investment servicing, data & analytics, investment research & trading and investment management to institutional clients.

Work, Live and Grow. We make all efforts to create a great work environment. Our benefits packages are competitive and comprehensive. Details vary in locations, but you may expect generous medical care, insurance and savings plans among other perks. You’ll have access to flexible Work Program to help you match your needs. And our wealth of development programs and educational support will help you reach your full potential.

Inclusion, Diversity and Social Responsibility. We truly believe our employees’ diverse backgrounds, experiences and perspective are a powerful contributor to creating an inclusive environment where everyone can thrive and reach their maximum potential while adding value to both our organization and our clients. We warmly welcome the candidates of diverse origin, background, ability, age, sexual orientation, gender identity and personality. Another fundamental value at State Street is active engagement with our communities around the world, both as a partner and a leader. You will have tools to help balance your professional and personal life, paid volunteer days, matching gift program and access to employee networks that help you stay connected to what matters to you.

State Street is an equal opportunity and affirmative action employer. Discover more at StateStreet.com/careers

About Us:

Paula’s Choice, a global skincare leader founded in 1995, empowers individuals to define beauty on their own terms through science-backed products. Our mission comes to life through four core values that guide our actions, decisions, and impact:

·       Build Trust: We set the standard for skincare, transparency, and shared knowledge.

·       Be Bold: We lead through innovation and by challenging the status quo.

·       Act with Kindness: We operate with respect and care—for our customers, colleagues, and the planet.

·       Create Community: We believe in the power of connection—whether educating customers, supporting each other, or giving back, we grow stronger together.

About the Region:

Our Southeast Asian headquarters is located in Singapore, and currently manages Singapore, Malaysia, Indonesia, Thailand, Philippines and India. Our channels include not only our own DTC platform, but also marketplaces such as Lazada, Shopee, Amazon, Zalora as well as an offline presence in Unity Pharmacies and Sephora Stores.

About Our Culture:

We’re a rapidly growing entrepreneurial team that thrives on change, prioritizing a culture of feedback and inclusivity. Our culture encourages continuous learning and is fueled by connection, curiosity, and cross-functional collaboration.

Paula’s Choice is also committed to diversity! Our customers come from all walks of life and so do we. We hire great people from a wide variety of backgrounds, not just because it’s the right thing to do, but because it makes our company stronger. We hope you agree. If you share our values and our enthusiasm for empowering people to achieve their own definition of beautiful, Paula’s Choice could be a wonderful fit for you.

About the Role:

Paula's Choice SEA is looking for a Social& Community Intern to support our Assistant Manager, Social & Community across two exciting functions: social media and PR & KOL. This is a hands-on, learn-by-doing role, you'll be in the thick of content planning, influencer coordination, and campaign execution across five markets in Southeast Asia.

You'll be working directly alongside one person who owns both the social and PR/KOL remit for the region. That means real exposure, real responsibility, and real variety, no two days will look the same.

What you’ll do:

Social Media Support

·       Assist in building and maintaining monthly social media content calendars across TikTok (SG, MY,PH)

·       Help draft captions, content copy, and creative briefs aligned to our content pillars

·       Source and compile visual references, trending audio, and competitor content to inform content ideation.

·       Assist in scheduling and publishing content across social platforms using social media management tools.

·       Monitor comments, tags, and community activity across platforms; flag items that need a response.

·       Track and compile weekly/monthly content performance data (engagement rate, reach, views) into reports and decks.

·       Conduct regular trend-spotting on TikTok and Instagram Reels to surface reactive content opportunities.

PR & KOL Support

·       Help coordinate end-to-end KOL gifting and seeding campaigns

·       Assist in drafting and formatting KOL briefs, talking points, and content guidelines for influencer collaborations.

·       Maintain and update the regional KOL and media master list, including contact details, tier classification, and engagement metrics.

·       Support the tracking and compilation of influencer content for campaign reporting

·       Assist in media list management and help prepare press materials, media kits, and product factsheets.

·       Support the coordination of PR events and media experiences — including invitation management, logistics, and on-site assistance.

·       Monitor and collate earned media and influencer coverage across markets; maintain a coverage tracker.

·       Help with post-campaign reporting by pulling data and formatting decks for internal review.

·       Maintain organized filing systems for content assets, campaign materials, KOL contracts, and coverage records.

What We’re Looking For:

·       Currently pursuing or recently completed a degree in Communications, Marketing, Media Studies, or a related field.

·       Genuinely passionate about skincare, beauty, and social media — you're the person in your friend group who always knows what's trending.

·       A confident writer who can adapt tone across brand content, briefs, and captions without losing the brand voice.

·       Highly organized and detail-oriented — you keep your own trackers tidy and notice when something doesn't match.

·       Comfortable working independently and managing multiple tasks with different deadlines.

·       Curious about analytics and performance data; you want to understand why content works, not just what to post.

·       Comfortable on camera— a bonus if you're happy to assist with or appear in TikTok content.

·       Digitally fluent with TikTok, and familiar with tools like Canva and Cap Cut

Bonus Points For:

o  Prior internship or project experience in social media, PR, or influencer marketing.

o  Familiarity with analytics platforms (Brand watch, TikTok Analytics, or similar).

o  Basic graphic design skills using Canva or Adobe tools.

o  Experience managing or contributing to a personal brand or social media account.

Why You’ll Love it Here:

·       Work on a regional stage with a cult-favourite global brand.

·       Be part of a passionate, collaborative, and creative team.

·       Shape stories that inspire confidence, self-care, and empowerment.

·       Thrive in a fast-moving, dynamic environment where your ideas matter.

Do you recognize yourself in the description above and do you enjoy working in a dynamic and collaborative work environment? Then we’d love to get to know you and hopefully welcome you to join our enthusiastic team soon (yes we move fast, also in our recruitment!). We look forward to receiving your Curriculum Vitae along with your portfolio of work(if available). Only shortlisted candidates will be contacted.

If you would like further information about this vacancy please contact Radhika Jain, HR Director SEA via radhika.jain@paulaschoice.sg.

About the Role

Join a leading global manufacturing organisation with a strong presence across more than 100 countries. Renowned for its commitment to innovation, sustainability and people development, the company offers interns the opportunity to gain hands-on exposure to regional HR operations while working alongside experienced HR professionals in a collaborative and fast-paced environment.

As an HR Operations Intern, you will support a broad spectrum of HR functions, including talent acquisition, onboarding, employee engagement, HR analytics, learning & development, and HR projects. You will also assist with regional recruitment reporting across Southeast Asia, coordinate internship programmes, maintain HR records, and contribute to initiatives that enhance the overall employee experience.

Who should apply? Candidates who are looking:

• To build a strong HR foundation – Gain practical experience across multiple HR disciplines, from recruitment and onboarding to HR analytics and employee engagement.
• Regional exposure – Work on HR initiatives that span Singapore and Southeast Asia, developing valuable experience in a multinational corporate environment.
• To develop future-ready skills – Strengthen your analytical, communication and project coordination capabilities while working with experienced HR professionals and participating in meaningful HR initiatives.

Key Responsibilities

Talent Acquisition

• Support end-to-end recruitment activities, including posting job advertisements, screening resumes, scheduling interviews and coordinating communication with candidates.
• Assist in preparing monthly recruitment reports and recruitment analytics across multiple countries within the Southeast Asia region.
• Support the recruitment and onboarding of interns, including planning and coordinating internship engagement activities.

Onboarding & Employee Lifecycle

• Assist with onboarding activities for new hires by preparing onboarding materials and ensuring all required documentation and administrative processes are completed.
• Maintain accurate and confidential employee records within the HR Information System (HRIS).

Employee Engagement

• Support the planning and execution of employee engagement initiatives, events and activities to foster a positive employee experience.

HR Projects & Analytics

• Participate in HR projects and continuous improvement initiatives.
• Assist with data analysis, report preparation and presentation development using Excel and PowerPoint.

Learning & Development

• Coordinate training programmes and learning initiatives, including scheduling, logistics and administrative support.

Requirements

• Currently pursuing a Bachelor's Degree in Business Administration, Human Resource Management or a related discipline.
• Available for a full-time internship for 6 months.
• Able to travel between two office locations when required.
• Proficient in Microsoft Office applications, particularly Excel, PowerPoint and Word.
• Strong analytical and data interpretation skills.
• Excellent communication, organisational and problem-solving abilities.
• Detail-oriented, proactive and eager to learn in a fast-paced environment.

Qualified applicants, please send a copy of your resume in MS Word to:

melanietay@recruitexpress.com.sg

or call Melanie at 6736 3280 for further enquiries

All information will be treated with confidentiality and only selected candidates would be notified

Consultant: Melanie Zheng Zhiyuan

Designation: Principal Consultant/Division Manager

CEI Reg No: R1104774

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA License Number: 99C4599

Job Description

• Industry/ Organization Type: M&E Consultancy Firm
• Position Title: Mechanical Design Engineer/Project Engineer (Building and Infrastructure)
• Working Location: East – Paya Lebar
• Working Hours: 5 days (Mon-Fri: 8.30 am - 6 pm)
• Salary Package: Up to SGD 5500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Build relationships with clients and contractors from other organizations
• Carry out duties in accordance with company procedures and implement prescribed systems of work
• Understand design philosophy/design fundamentals and communicate engineering solutions to project stakeholders
• Perform engineering calculations with the aid of engineering software such as Computational Fluid Dynamics (CFD), Full Hydraulic Calculation (FHC)
• Familiar with Architect, Structural/Service Engineers drawings/specifications
• Carry out investigative and technical review works
• Responsible for the development and production of drawings/calculations/specifications /reports
• Set an example for placement of students and junior engineers

APPLY NOW!!!

• Min Diploma in Mechanical Engineering
• Min. 1 year of working experience in the consultancy firm in the design of ACMV, fire, and hydraulic services
• Experience as a Contractor in project execution will be considered
• Experience in Energy Storage System (ESS) / Capability in carbon, sustainability, resources conservation, and renewables will be an added advantage
• Carry out tasks and duties assigned in a positive and dignified manner

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #74684 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities:

• Oversee projects and supervise site coordination
• Support Sales Designers on interior design scope of work
• Support Design team with space planning and concept development
• Guide junior executives when necessary

Requirements:

• Min 4-5 years of interior design experience, including site management experience in luxury large-scale residential projects
• Detail-oriented with good follow-up skills

JOB-00548

What You’ll Do (Key Responsibilities)

• Advanced Layout Design: Architect multi-layer, high-density PCBs for complex satellite communication equipment, managing critical constraints like signal integrity (SI), power integrity (PI), and thermal management.

• RF & High-Speed Routing: Execute impedance-controlled routing, grounding strategies, and microwave-frequency layouts for critical RF components (SSPAs, BUCs, LNAs).

• End-to-End Execution: Drive the entire ECAD workflow using Altium Designer (or equivalent)—from schematic capture and library management to generating production-ready manufacturing packages (Gerber, ODB++, pick-and-place).

• Simulation & Validation: Utilize RF simulation tools (HFSS, AWR) to optimize board performance and minimize EMI/EMC risks before fabrication.

• Lab Testing & Bring-Up: Roll up your sleeves in the lab to support prototype assembly, board bring-up, debugging, and root-cause analysis using spectrum analyzers, network analyzers, and oscilloscopes.

• Design for Excellence (DFX): Partner with manufacturing teams to conduct DFM/DFA reviews, ensuring seamless production scaling and strict adherence to IPC standards.

What You Bring (Qualifications & Experience)

• Education: Bachelor’s or Master’s degree in Electrical/Electronics Engineering, Telecommunications, or a related discipline.

• Experience: 3–5+ years of proven experience in multi-layer PCB design, with a strong emphasis on RF, wireless, or telecommunications hardware.

• ECAD Expertise: High proficiency in Altium Designer, Cadence Allegro/OrCAD, or Mentor Graphics.

• Technical Depth: Deep understanding of analog, digital, mixed-signal, and high-speed digital layout techniques (controlled impedance, differential pairs).

• RF Component Familiarity: Working knowledge of RF communication building blocks like Transceivers, Down-Converters, BUCs, and LNAs.

• Lab Skills: Hands-on experience troubleshooting physical hardware using RF lab equipment (VNA, Spectrum Analyzers).

• Standards: Familiarity with IPC guidelines, EMI/EMC compliance, and aerospace/defense reliability standards.

Please submit your updated resume in Word format by using the Apply Now Button.

We regret that only shortlisted candidates will be notified.

Email resume to che••••••••••@peopleprofilers.com

People Profilers Pte Ltd, 20 Cecil Street, #08-09 PLUS Building, Singapore 049705

Tel: 69•• •744

Posting Personnel: Ding Xin Er

EA Licence Number: 02C4944

Registration Number: R22106669

Responsibilities:

- Brainstorm and pitch engaging content

- Manage social media accounts

- Craft compelling captions for posts

- Create simple graphic artwork

- Simplify complex scientific concepts into clear, accurate, and compelling content.

- Manage content calendars and ensure timely delivery across digital platforms.

- Optimize content for social media, and audience engagement.

- Track performance metrics and refine strategies based on data.

- Assist with other ad-hoc marketing duties as required

Requirements:

- Diploma/Degree in Communications, Design, or related fields.

- Min 1 year of content creation experience.

- Proficiency in design tools and/or video editing.

- Strong storytelling, writing, and organizational skills.

- Basic social media knowledge.

Interested applicants are invited to apply directly at the NUS Career Portal. Please note your application will only be processed if you apply via NUS Career Portal.

NUS Career Portal link: https://careers.nus.edu.sg/job/Research-Assistant-%28Spatial-Computing-Developer%29%2C-Division-of-Industrial-Design/33484-en_GB/

We regret that only shortlisted candidates will be notified.

Job Description

The research assistant will design and develop software applications and content for the Apple Vision Pro in close collaboration with both the principal investigator along with clinical collaborators for deployment as real-world healthcare applications.

Qualifications

Master’s degree in Design or Computer Science

Responsibilities:

- Brainstorm and pitch engaging content

- Manage social media accounts

- Craft compelling captions for posts

- Create simple graphic artwork

- Simplify complex scientific concepts into clear, accurate, and compelling content.

- Manage content calendars and ensure timely delivery across digital platforms.

- Optimize content for social media, and audience engagement.

- Track performance metrics and refine strategies based on data.

- Assist with other ad-hoc marketing duties as required

Requirements:

- Diploma/Degree in Communications, Design, or related fields.

- Min 1 year of content creation experience.

- Proficiency in design tools and/or video editing.

- Strong storytelling, writing, and organizational skills.

- Basic social media knowledge.

JOB-00583

Key Responsibilities:

• Collaboration with Project Manager and customer to understand design requirements and specifications for the product.

• Analyse project requirements and participate in concept generation.

• Design high precision and high-tech automation equipment.

• Selection of standard components such as sensor, pneumatic, motor, servo axis and robotics.

• BOM preparation using SAP.

• Coordinate with fabrication house and component suppliers.

• Report project progress to Project Manager and superior.

• Guide assembly technicians to build and test the equipment.

• Collaborate with cross-functional teams (including design, manufacturing, and quality assurance) to ensure compliance with industry standards and regulatory requirements.

Job Requirement:

• Minimum 6 years of relevant experience in automation equipment design.

• Knowledge and experience in factory automation is an advantage.

• Experience in mechanical, electrical, pneumatic, sensor component selections.

• Proficient in Solidworks 3D and EPDM software.

• Excellent problem-solving and analytical skills with meticulous attention to detail.

• Strong communication skills and ability to collaborate effectively in a team environment.

• Knowledge of industry standards and regulations related to machine safety and performance (e.g., ISO, IEC standards).

• Familiarity with reliability engineering principles and techniques.

Please submit your updated resume in Word format by using the Apply Now Button.

We regret that only shortlisted candidates will be notified.

Email resume to che••••••••••@peopleprofilers.com

People Profilers Pte Ltd, 20 Cecil Street, #08-09 PLUS Building, Singapore 049705

Tel: 69•• •744

Posting Personnel: Ding Xin Er

EA Licence Number: 02C4944

Registration Number: R22106669

Job Description:

• Sourcing and reaching out to candidates
• Screening resumes and conducting interviews to assess candidate suitability
• Coordinating interviews with candidates and hiring managers
• Guiding new hires through onboarding processes and necessary admin work
• Handling team communications and admin
• No experience needed, TRAINING PROVIDED

Soft Skills You'll Walk Away With:

• ✅ Communication & active listening
• ✅ Critical thinking & people judgement
• ✅ Stakeholder & time management
• ✅ Professionalism & workplace etiquette
• ✅ Adaptability across different roles and industries

What's in for you?

• One-to-one mentorship
• Potential to extend or convert to a permanent role based on performance and business needs

Requirements:

• Min diploma or degree
• Enjoys liaising with people from all walks of life

Interested candidate, kindly send a copy of your resume to: healthcare7@recruitexpress.com.sg

Jessica Fong Zhi Tong [R1879124]

Email Address: healthcare7@recruitexpress.com.sg

Recruit Express Pte Ltd

EA Licence No: 99C4599

Job Description

• Industry/ Organization Type: Building and Construction
• Position Title: Design Manager (Facade / Building Envelope)
• Working Location: Redhill
• Working Hours: 5 Days (Mon - Fri, 8:30AM – 6PM)
• Salary Package: Basic Salary + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Lead and manage the design team in executing façade design works according to project requirements and timelines.
• Plan, organize, and monitor design activities to ensure alignment with the overall construction schedule.
• Provide leadership and guidance to team members, including work allocation, design quality checks, and productivity improvement.
• Review and verify design drawings, cutting lists, and technical deliverables to ensure compliance with specifications and standards.
• Coordinate effectively with consultants, main contractors, and other stakeholders to resolve design and technical issues.
• Identify and report any additional work or variations to the Project or Contract Manager for approval.
• Support site teams in resolving design clashes and provide technical input during construction.
• Participate in design workshops and review meetings, ensuring constructability and design quality are maintained throughout the project.
• Manage design changes efficiently to minimize schedule disruptions and cost impacts.
• Address interface issues between disciplines during various design stages and ensure smooth communication across teams.
• Perform other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum 5 years of experience in façade design or related fields.
• Proficient in design development and design management processes.
• Knowledge of Revit and Rhino is an advantage; must be able to read and extract information from 3D models in these formats.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #79467 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

The Energy Research Institute @ NTU (ERI@N) conducts applied research in advanced energy systems and sustainable infrastructure. This position supports an ERI@N-led project on integrating non-conventional geothermal energy into data centre cooling in Singapore.

We are seeking a Research Fellow to lead the development of advanced modelling and design methodologies for integrated hydrogen-energy systems, with a focus on thermal integration of metal hydride storage systems.

The Research Fellow will develop CFD models, process simulations, and system-level integration strategies to enable efficient hydrogen desorption driven by waste heat. The role includes the design and optimisation of thermal management systems, supporting the development of scalable and deployable hydrogen solutions.

The research will directly contribute to the development of applied energy technologies with strong industrial relevance and near-term deployment potential.

Key Responsibilities

• Develop CFD models for thermal management and heat transfer within metal hydride storage systems, including internal heat exchanger design and thermal enhancement strategies.

• Design and optimise heat integration solutions for hydrogen desorption using waste heat from high-temperature systems.

• Develop process flow diagrams (PFDs) and system-level models for integrated hydrogen-energy systems.

• Perform multi-physics modelling (thermal, fluid, and mass transfer) of hydrogen storage and release processes.

• Support system architecture definition, thermal loop design, and control strategies for integrated systems.

• Conduct techno-economic and performance analysis of integrated hydrogen systems.

• Contribute to system integration, commissioning, and experimental validation activities.

• Collaborate with international industrial and academic partners in applied R&D projects.

• Prepare technical reports, scientific publications, and funding proposals.

• Support project management activities, including coordination, reporting, and stakeholder engagement.

• To develop and assess geothermal-driven cooling architectures through modelling, optimisation, and techno-economic analysis, supporting low-carbon cooling solutions for Singapore’s data centre sector.

Job Requirements

• PhD in Mechanical Engineering, Energy Engineering, Chemical Engineering, or related field.

• Strong expertise in CFD (ANSYS Fluent / OpenFOAM or equivalent) for heat transfer and fluid flow.

• Experience in thermal system design and heat integration, preferably involving high-temperature systems.

• Experience with hydrogen systems, metal hydrides, or gas-solid thermal processes is highly desirable.

• Experience in process modelling and simulation (e.g., Aspen, Modelica, MATLAB, Python).

• Strong understanding of heat exchangers, thermal loops, and multi-physics systems.

• Experience in techno-economic analysis and system optimisation.

• Familiarity with system integration and experimental validation is an advantage.

Additional Skills

• Ability to work in applied, industry-driven R&D environments.

• Experience in proposal writing and project management is highly desirable.

• Willingness to travel and work in international environments.

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

1. Develop design requirements for an NPU based on system-level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug any issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on experience in digital design is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.