The Senior Engineer supports photolithography process development for advanced memory technologies through hands‑on experimentation, data analysis, and yield improvement activities. This role focuses on execution excellence, disciplined learning, and collaboration, operating under guidance from senior technical leaders. Success in this role requires strong fundamentals in photolithography, analytical rigor, and the ability to translate experimental data into actionable insights. 

Main Responsibilities 

• Execute photolithography process development, optimization, and troubleshooting tasks in support of yield, quality, and performance targets. 

• Perform DOE, SPC, and statistical analysis to characterize process behavior and identify improvement opportunities. 

• Support material evaluations, defect learning, overlay analysis, and process window characterization. 

• Assist with integration learning during development and early manufacturing ramps. 

• Collaborate with cross‑functional teams including integration, etch, metrology, and yield engineering. 

Other Responsibilities 

• Document experimental procedures, results, and learnings in technical reports and presentations. 

• Support technology transfer activities under direction of senior engineers. 

• Integrates AI‑assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements. 

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI‑enabled enhancements within one’s scope of work. 

Candidate Profile 

Minimum Qualifications / Experience 

• PhD, or Master’s ≥3 yrs, or Bachelor’s ≥5 yrs of relevant experience in 
  Electrical Engineering, Materials Science, Chemical Engineering, Physics, or related field, with foundational experience in semiconductor photolithography process development. 

Must‑Have Technical Skills 

• Demonstrated ability to contribute effectively to photolithography process development initiatives and improvement plans. 

• Deep knowledge in optics, immersion lithography, polarized illumination, and low k1 imaging  

• Proficiency in lithography simulation tools, material characterization, DOE, SPC, and basic statistical data analysis 

Must‑Have Soft Skills 

• Analytical thinking and structured problem‑solving 

• Collaboration and openness to learning 

• Clear technical communication 

• Project Management; especially in technical & technology programs  

• Demonstrates ability in applying AI tools to improve workflows, drive efficiency, and support data-informed decisions across teams and projects.

Highly Desirable / Preferred 

• Exposure to advanced lithography (193nm, 248nm, 365nm) and EUV processes 

• Hands-on experience with innovative photolithography equipment and metrology tools 

Embody Micron’s core values: 

• People – Respect, develop and empower others  

• Innovation – Drive continuous improvement and breakthrough thinking  

• Tenacity – Show grit and determination  

• Collaboration – Build trust and foster teamwork  

• Customer Focus – Deliver excellence and value 

You are responsible for new equipment introduction, risk assessment, equipment set-up, release, PM, Calibration, lab audits and as well as continuous improvement activities such as equipment reliability improvement, cost reduction, and equipment usage optimization. Through this role, you will enhance your technical skills in equipment management and improvement, project management, and strengthen your engagement and network with vendors and global GEL organizations across Micron sites.

Responsibilities

-Support GEL Equipment and lab operations including Internal and External audits, ESD and PM, Calibration, equipment troubleshooting, Safety and Chemical controls.

- Oversees the installation, modification, upgrade and maintenance of Engineering equipment.

- Maintains current records on equipment manufacturers’ technical notices, upgrades and safety issues. Studies equipment performance and reliability. - -- Establishes programs and solutions for increasing uptime and for equipment problems that affect the engineering process.

-Provides technical support to the engineering equipment repair and process engineering organizations. Defines and writes preventative maintenance schedules.

- Collaborate with cross functional teams on equipment requirements, space planning, facilitation, purchase and installation of equipment.
- Equipment inventory controls and critical spare parts planning.

- Coordinate external vendors on training, repair, and preventive maintenance of equipment.
- Manage external vendors expectation, set and assess goals and achievements.
- Analyze and support stakeholders’ requirements and expectations.
- Foster closer collaboration amongst cross functional teams.
- Focus on customer needs and provide timely solutions.

Requirement

• Bachelor's degree in engineering with experience with ESD checks

• At least 1 year of experience in Semiconductor Equipment or Tools PM, calibration, and troubleshooting.

• Knowledge with Automated Optical Inspection and ANSYS Simulation

Frontend Engineer

Location: Singapore | Type: 18 months contract| Sector: Public Sector / Government Technology

About the Role

We are looking for a Frontend Engineer to join a project team delivering web applications for a government tax agency. You will work closely with product managers, backend engineers, and UX designers to build intuitive, user-facing applications that support both internal operations and public-facing services.

This is an opportunity to contribute to meaningful public infrastructure — helping modernise legacy systems and raise the bar for digital services in the public sector.

Job Description

• Build and maintain responsive, performant web applications using React and TypeScript
• Translate UX wireframes and design specs into clean, accessible UI components
• Collaborate with backend engineers to integrate RESTful APIs and define data contracts
• Write unit and integration tests to maintain code quality and reliability
• Participate in code reviews, technical discussions, and sprint ceremonies
• Identify and resolve performance bottlenecks and cross-browser compatibility issues
• Contribute to and maintain a shared component library
• Work across multiple web application projects, adapting to different product contexts and user needs

Required

• 3+ years of frontend development experience
• Strong proficiency in TypeScript and React (hooks, context, component patterns)
• Solid understanding of HTML, CSS, and responsive design principles
• Experience consuming and integrating REST APIs
• Familiarity with modern tooling: Vite or Webpack, ESLint, Git
• Ability to write maintainable, well-tested code

Nice to Have

• Experience with state management libraries (Zustand, Redux Toolkit, or similar)
• Exposure to design systems or component libraries
• Prior work on web applications, enterprise systems, or government/public sector projects
• Knowledge of CI/CD pipelines and deployment workflows

Working Environment

• Agile delivery team with regular sprints, retrospectives, and demos
• Close collaboration with government stakeholders and end users
• Projects operate under government security and compliance requirements — candidates must be comfortable working within a structured and regulated environment

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is hiring for Systems Engineer (Full Stack).

You will work in Singapore Government Agencies.

This is a fixed term contract. The engagement is 8-month

Internal Code: A26193

What will you do?

We are seeking a Systems Engineer (Full Stack) with strong foundations in cloud infrastructure, DevOps, and system integration, complemented by hands-on expertise in full stack engineering and scalable platform development.

As you will be working on a full stack engineering role focused on building and operatingAPIs and microservices, core competencies such as cloud platforms, DevOps practices, and backend/frontend engineering are mandatory foundations.

Operating at the intersection of full stack development, cloud infrastructure, and platform engineering, this role drives the design, delivery, and operation of scalable backend services and APIs for Singapore’s Land Transport Authority, ensuring solutions are built with engineering rigor, tested thoroughly, and operated with production reliability.

Full Stack Development & Delivery

• Design and build RESTful and event-driven APIs, microservices, and backend platforms using ECMAScript (TypeScript/JavaScript), Go, and Python
• Implement CI/CD pipelines for automated testing, build, and deployment of services on AWS
• Deploy and operate containerised services on Kubernetes (EKS); manage service configuration, health checks, and rolling deployments
• Translate stakeholder needs into well-defined API contracts, data models, and system requirements with full traceability
• Integrate backend services with LTA’s existing infrastructure, databases, message queues, and third-party APIs ensuring seamless interoperability
• Write clean, well-tested, production-grade code with thorough unit and integration test coverage
• Automate data pipelines and workflow orchestration using AWS services and Infrastructure as Code
• Foster cross-functional collaboration among product managers, designers, security teams, and operations staff

Production Implementation & Operations

• Deploy and operate production-ready microservices and platform APIs at scale across LTA infrastructure on AWS
• Build and manage Kubernetes workloads with containerisation, monitoring, and automated health checks
• Implement comprehensive monitoring, logging, and alerting for production backend services
• Integrate platform services with LTA’s APIs, databases, message queues, and network systems
• Optimise system performance, API response times, and throughput to meet latency and scalability requirements
• Participate in architecture and design discussions, contributing to platform scalability and service design decisions
• Implement security, compliance, and data governance including PDPA compliance, encryption, and access controls

System Integration & Maintenance

• Maintain and troubleshoot deployed infrastructure with systematic debugging and root cause analysis
• Monitor system health, implement automated remediation, and respond to production incidents
• Manage service versioning and release pipelines ensuring reproducibility and rollback capabilities
• Provide technical support for infrastructure, networking, and backend service performance issues
• Collaborate with operations teams ensuring reliability, uptime SLAs, and operational excellence

What are we looking for?

• Bachelor’s degree in Computer Science, Engineering, Information Systems, or related technical field (required)

• Master’s degree in Computer Science, Software Engineering, or related field (preferred)
• AWS certifications: Solutions Architect Associate/Professional, Developer Associate, DevOps Engineer Professional
• Kubernetes certifications: CKA, CKAD
• HashiCorp Terraform Associate or equivalent IaC certification
• Other relevant technical certifications
• Core Full Stack Engineering (Required)
• Cloud Platforms: AWS infrastructure and services including EC2, S3, Lambda, VPC, IAM, CloudWatch, ECS/EKS; cloud architecture for compute, storage, networking, and security
• DevOps & Automation: Git version control, CI/CD pipelines, Infrastructure as Code, Docker containerization, Kubernetes orchestration, automated testing and deployment strategies
• Systems Integration: RESTful API design and development, data pipelines and ETL processes, database integration, networking fundamentals, distributed systems and microservices
• Programming: ECMAScript/TypeScript (required), Go (required), Python (required); production-grade practices including automated testing, structured logging, and API documentation
• Platform & Full Stack (Preferred)
• Frontend: React or similar modern frontend framework; responsive design; REST/GraphQL API consumption; basic UI/UX sensibility
• Kubernetes & Platform: Kubernetes workload management (preferred); Helm charts; service mesh concepts; AWS EKS; infrastructure provisioning with Terraform or CDK
• Observability & Quality: Structured logging, distributed tracing, metrics dashboards (CloudWatch, Datadog, or similar); test pyramid understanding; code review practices
• Application Domains
• Backend API and microservices platform development for public-facing and internal-facing LTA systems
• Cloud-native service integration with AWS-hosted infrastructure and government platforms

• Experience with transportation, smart city, or public sector digital services is a strong plus
• Strong systems-thinking mindset to decompose complex problems into modular solutions
• Excellent communication and stakeholder management translating technical concepts to non-technical audiences
• Ability to balance technical depth with production delivery and operational reliability
• Proactive, collaborative, and adaptable in fast-evolving technical environments
• Documentation expertise: technical documentation, architecture diagrams, runbooks, API documentation
• Mentoring and knowledge transfer capabilities
• Agile/project management experience
• 2–4 years hands-on experience as a full stack or backend engineer building production services with ECMAScript/TypeScript, Go, or Python on cloud platforms
• Proven track record shipping and operating production APIs and services on AWS with reliability, monitoring, and incident response
• Strong foundation in API design, microservices architecture, databases, and distributed systems
• Demonstrated experience delivering full stack features end-to-end from API design through deployment and monitoring
• Kubernetes experience (CKA/CKAD certified or equivalent practical experience) is highly valued
• Contributions to open-source projects or portfolio of shipped software products is a plus
• Government or public sector project experience with compliance requirements advantageous
• Portfolio or GitHub demonstrating shipped software — APIs, services, or full stack applications
• Ability to work with non-technical stakeholders and translate complex technical concepts clearly
• Understanding of data privacy, security, and compliance in government contexts
• Problem-solving mindset with ability to work independently and in cross-functional teams
• On-call availability for production infrastructure support on rotation basis
• Ability to respond to incidents with systematic troubleshooting under pressure

Work Arrangement

• Hybrid work model: 3 days onsite at LTA per week, 2 days remote work
• Flexibility required: Must be available onsite on remote days if meetings or operational needs arise
• Location: Land Transport Authority offices, Singapore; occasional visits to GovTech HQ
• Collaboration: Regular interaction with LTA stakeholders, operations teams, and cross-functional project teams

This is a contract position (half a year) with GovTech Singapore, deployed to the Land Transport Authority. We are committed to building an inclusive and diverse workplace that reflects the Singapore we serve.

What do we offer in return?

Competitive Compensation: Market competitive salary and variable performance bonus aligned to your skills, impact, and contribution. 

Benefits: Outpatient medical, specialist medical coverage and generous customisable flexi benefits, or flexi allowance; life and health insurance, thoughtful perks like special occasions “red packet” and CNY goodies, etc. 

Employee Wellness: Support for your physical, mental, and overall well-being through year-round initiatives. 

Growth & Development: Learning programmes, certification support, and a dedicated staff development budget. (We are a “SHRI 2025 Gold winner” in “Learning & Development; Coaching & Mentoring”) 

Career Progression: Structured career pathways that enable you to grow along a technical/domain expert track or a leadership track. 

Competency Framework: A structured and practical framework to support you to develop, perform, and succeed. 

Flexible Work Arrangement: Staff may choose to work flexi-place, flexi-time, and flexi-load based on existing framework 

Why you'll love working with us? 

If you are looking for opportunities to collaborate with leading industry experts and be surrounded by highly motivated and talented peers, we welcome you to join us. We provide all employees with equal opportunities to grow and develop with us. We believe your success is our success. 

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat.

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law. 

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd. 

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes. 

Please consult our Privacy Notice () to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data. 

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Diploma in Aersopace Engineering or relevant
• Minimum 2 years of working experience as Licensed Aircraft Engineer with ATR

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Oversea travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

• Position : Project Engineer
• Location : Tagore
• Working hours : Monday to Friday - 8.00AM to 5.00PM
• Salary (commensurate with experience) : Up to $4,500 + Attractive Incentives & Remuneration
• Duration : Permanent
• Industry : Industrial equipment supplier

Responsibilities:

• Manage engineering projects from commencement to completion, ensuring timely delivery within budget and contract requirements.
• Coordinate and liaise with internal teams, clients, vendors, and external stakeholders.
• Design and size equipment, and prepare layout drawings based on project requirements.
• Handle project costing, procurement, and supplier coordination.
• Monitor project schedules, budgets, and deliverables to ensure smooth execution.
• Support on-site equipment/system commissioning, start-up, and troubleshooting when required.

Requirements:

• Bachelor’s Degree in Mechanical Engineering or equivalent.
• Able to manage multiple projects concurrently in a fast-paced environment.
• Strong communication, coordination, and interpersonal skills.
• Good analytical, creative, and logical problem-solving abilities.
• Willing to travel when required.
• Experience in powder-processing systems or equipment will be an added advantage.
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only.

Email to: jeslyn@searchpersonnel.com.sg

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Deputy Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Our shortlisting process takes 3 working days, and only shortlisted candidates will be contacted.

If you do not hear from us within this period, your application was not shortlisted. We encourage you to continue your job search, and we will contact you should a suitable opportunity arise. We wish you all the best.

Electrical Engineer (Construction & Manufacturing)

Job Summary

The Electrical Engineer is responsible for designing, implementing, maintaining, and improving electrical systems used in construction projects and manufacturing facilities. This role ensures that all electrical installations, machinery, and systems operate efficiently, safely, and in compliance with regulatory standards.

Key Responsibilities

Design & Engineering

• Design electrical systems for buildings, plants, and industrial facilities, including power distribution, lighting, grounding, and control systems.
• Prepare electrical drawings, schematics, and technical specifications.
• Perform load calculations, system sizing, and equipment selection.

Project Management (Construction)

• Plan and oversee electrical installation activities on construction sites.
• Coordinate with civil, mechanical, and project teams to ensure smooth integration of systems.
• Monitor project timelines, budgets, and contractor performance.
• Ensure compliance with local electrical codes and safety regulations.

Manufacturing & Plant Operations

• Maintain and troubleshoot electrical equipment such as motors, PLCs, transformers, and control panels.
• Support production teams to minimize downtime and optimize efficiency.
• Implement preventive and predictive maintenance programs.

Automation & Control Systems

• Design, program, and maintain PLC (Programmable Logic Controller) and SCADA systems.
• Improve automation processes to enhance productivity and safety.
• Diagnose and resolve control system faults and failures.

Installation & Commissioning

• Supervise installation, testing, and commissioning of electrical systems and equipment.
• Ensure proper calibration and functionality before project handover.
• Prepare commissioning reports and documentation.

Safety & Compliance

• Ensure all electrical systems comply with safety standards (e.g., IEC, NEC, local regulations).
• Conduct risk assessments and implement safety measures.
• Participate in audits, inspections, and incident investigations.

Energy Management

• Monitor energy consumption and recommend energy-saving initiatives.
• Implement sustainable and energy-efficient solutions.

Documentation & Reporting

• Maintain detailed records of electrical designs, maintenance activities, and project progress.
• Prepare technical reports, manuals, and SOPs (Standard Operating Procedures).

Qualifications

Education

• Bachelor’s degree in Electrical Engineering or related field.

Experience

• 2–7 years of experience in electrical engineering within construction or manufacturing environments.
• Experience with industrial electrical systems and project execution is preferred.

Technical Skills

• Knowledge of power systems, electrical circuits, and industrial automation.
• Experience with PLCs, SCADA systems, VFDs, and control panels.
• Proficiency in design software (AutoCAD, EPLAN, ETAP, or similar).
• Understanding of electrical standards and codes.

Soft Skills

• Strong problem-solving and analytical skills.
• Excellent communication and coordination abilities.
• Ability to manage multiple projects and deadlines.
• Attention to detail and commitment to safety.

Key Performance Indicators (KPIs)

• Project completion within time and budget
• Equipment uptime and reliability
• Reduction in downtime and maintenance costs
• Energy efficiency improvements
• Compliance with safety and regulatory standards

Working Conditions

• Work may involve both office (design) and on-site (construction/plant) environments.
• Exposure to industrial hazards such as electrical systems, heavy equipment, and noise.
• May require travel to project sites and working extended hours when needed.

Core responsibilities

• Determines project schedule by studying project plan and specifications, calculating time requirements, and sequencing project elements.
• Maintains project schedule by monitoring project progress, coordinating activities, and resolving problems.
• Controls project plan by reviewing design, specifications, and plan, scheduling changes, and recommending actions.
• Managing the work activities for the group of Sub-Contractors, supervisor and workers
• Ensure that all legal requirements under the Singapore laws are complied with.
• Ensure that all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirement.
• Maintains safe and clean working environment by enforcing procedures, rules, and regulations.

Job Specifications

• Bachelor’s Degree Engineering (Civil) or equivalent
• Civil Engineering / Structural working experience in related fields is advantage.
• A proactive and resourceful individual who possess good communication, negotiation and presentation skills.
• Good communication and analytical skills, able to interact with people of all levels.

Key Responsibilities

• Develop detailed turnaround work packages, job plans, and schedules.

• Review maintenance work scopes, engineering requirements, and inspection findings.

• Conduct site walkdowns to verify job scope, access requirements, and resource needs.

• Prepare manpower, equipment, material, and subcontractor requirements.

• Coordinate with Operations, Maintenance, Inspection, Engineering, SHE, and Contractors during planning and execution phases.

• Estimate labour hours, equipment requirements, and turnaround costs.

• Develop task sequences and identify critical path activities.

• Ensure all materials, tools, permits, and resources are available before execution.

• Monitor turnaround progress and provide daily planning support during execution.

• Track schedule performance, productivity, and work completion status.

• Identify schedule risks, constraints, and opportunities for optimization.

• Prepare turnaround reports, KPIs, and post-turnaround lessons learned.

• Ensure compliance with company safety procedures, quality standards, and client requirements.

Requirements

• Diploma or Degree in Mechanical Engineering or related discipline.

• Minimum 3–5 years of planning experience in refinery, petrochemical, oil & gas, or industrial plant maintenance.

• Experience in plant turnaround/shutdown planning is preferred.

• Planning software such as Primavera P6 or Microsoft Project are added advantage

• Good communication, coordination, and stakeholder management skills.

• Ability to work under tight schedules and turnaround environments.

• Strong understanding of mechanical maintenance activities including:

  • Heaters

  • Static Equipment

  • Rotating Equipment

  • Piping

  • Heat Exchangers

  • Pressure Vessels

  • Valves

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are seeking a Utilities Engineer to ensure the proper maintenance and compliance of facility systems and equipment according to design specifications and GMP standards. The engineer will provide technical expertise for the operation and maintenance of utilities systems, supporting routine operations readiness. Responsibilities include ensuring adherence to standards, supporting the development of commissioning and qualification documents, and ensuring compliance with regulatory requirements. The role also involves troubleshooting technical issues, collaborating with cross-functional teams, and promoting knowledge sharing.

Key Responsibilities

Operational Excellence, Continuous Improvement, and Daily Operations

• Lead and support continuous improvement initiatives for utility system operations, maintenance, and reliability programs.
• Establish key metrics to ensure optimal performance of utility operations.
• Lead and support utility projects by reviewing engineering design documentation and related drawings.
• Lead and support Site Acceptance Tests (SAT), commissioning, and system testing to meet User Requirement Specifications (URS).
• Participate in system walk-downs to ensure reliable utility system operations.
  

Safety and Quality Compliance Management

• Lead and support audit readiness activities for regulatory inspections to ensure compliance with site and global SOPs, GEP, and GDP requirements.
• Assist in the development, revision, review, and approval of Standard Operating Procedures (SOPs), Risk Assessments, Preventive Maintenance Programs, and Job Plans.
• Lead and support deviation investigations, ensuring appropriate Corrective and Preventive Actions (CAPA) are implemented.
• Lead and support change control activities and continuous improvement initiatives to enhance system reliability and operational performance.
• Actively promote and uphold the Company's Safety Culture.

Sustainability

• Lead and support site sustainability initiatives through analysis of utility and energy consumption data.
• Identify opportunities to optimize utility usage and improve energy efficiency.
• Support the development of business cases and proposals to achieve site sustainability objectives.
• Generate and compile utility consumption data for regulatory authority submissions and internal reporting.

Required Qualifications

• Diploma or Degree in Mechanical, Electrical, Chemical, or related Engineering disciplines.
• Ability to work independently and collaboratively within cross-functional teams.
• Strong interpersonal, communication, and presentation skills.
• Proficient in computer applications and documentation systems.
• Experience working in a highly regulated environment with GMP documentation practices.
• Strong analytical and problem-solving capabilities with the ability to identify improvement opportunities.
• Effective stakeholder management and facilitation skills to achieve project and operational objectives.
• Ability to influence and collaborate positively with peers and stakeholders.
• Familiarity with utilities systems, maintenance programs, commissioning, qualification, and compliance requirements within pharmaceutical, biotech, or related manufacturing environments is preferred.

Why join us?

• Generous Leave Policy.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions? If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

KEY DUTIES & RESPONSIBILITIES

Project Planning and Execution:

• Assist the Project Manager in developing and implementing comprehensive project plans.
• Coordinate and oversee all construction activities on-site, ensuring compliance with project schedules and work programs.
• Monitor project progress and identify potential risks or issues, implementing corrective actions as needed.

Technical Documentation:

• Prepare, review, and submit various project documents, including schedules, method statements, design plans, risk assessments, and monthly reports.
• Conduct technical reviews of project specifications to ensure alignment with project requirements.

Site Supervision and Quality Control:

• Supervise construction activities to ensure adherence to contract specifications, drawings, quality standards, and ESH practices.
• Conduct regular site inspections to monitor progress and identify any deviations from project plans.
• Assist in the development and implementation of QA/QC procedures.
• Provide regular updates to the Project Manager on QA/QC issues and progress.

Stakeholder Management:

• Coordinate and liaise with clients, consultants, subcontractors, suppliers, and authorities on project-related matters.
• Attend regular project meetings and provide technical and non-technical solutions to issues.
• Assist in verifying progress payments and claims from contractors.

Ad-hoc Tasks:

• Maintain accurate project records and documentation.
• Prepare reports and presentations as required.

JOB REQUIREMENTS

• Diploma / Bachelor's degree in Electrical Engineering or with relevant experience
• 1-3 years of experience in construction
• Proficiency in Microsoft Office
• Strong understanding of construction methodologies, materials, and equipment.
• Excellent organizational, planning, and time management skills.
• Strong communication and interpersonal skills.
• Must be a good team player
• Ability to work under pressure and meet tight deadlines.

Job Description & Requirements

The company specializes in providing the marine and offshore industry with sustainability solutions. We focus on providing our customers with innovative solutions so that they can meet their companies’ ESG (Environment, Sustainability and Governance) goals, providing solutions for the energy transition, and marine maintenance, repair and overhaul.

Responsibilities:

· Develop green marine solutions that reduces marine carbon footprint, in line with company business objectives.

· Hands on in setting up of test lab to enable development and testing.

· Perform PLC software and algorithm development for electrical propulsion solutions.

· Generate documentation of software architecture and logic flow, test procedures, quality control and any other necessary supporting documents.

· Participate and support commissioning of vessels with similar configurations.

· Troubleshoot and resolve any issues related to our delivered solutions that may arise during the vessel commissioning.

· Any other tasks as may be required by supervisor.

Requirements:

· Minimum Engineering degree in relevant discipline

· Strong software development skills particularly in equipment controls

· Strong analytical and troubleshooting skills

· Hands on person

· Team player

· Good communicator and has no problem engaging with external parties

· Knowledge in power electronics, motor drives, marine propulsion systems is a plus

Responsibilities:

• Acts as the main technical advisor on construction sites, supervising staff, tools, and materials to ensure projects are completed safely, on time, and within budget.
• Interpret technical designs, set out site layouts, provide technical advice, and enforce safety regulations.
• Setting out, leveling, and surveying the site to establish building locations, grades, and elevations, ensuring all structural work follows design plans.
• Overseeing daily construction activities, managing subcontractors, and coordinating materials and labor to meet project goals.
• Providing technical solutions to site issues and conducting quality assurance inspections to ensure compliance with standards and regulations.
• Enforcing safety protocols, conducting safety audits, and ensuring compliance with Occupational Health and Safety (OHS) regulations.
• Maintaining accurate project documentation, such as site diaries, daily progress reports, and change orders.

Requirements:

• Min Degree in Civil Engineering or related field
• Min 3 years of relevant experience in geotechnical works and site supervision
• Experience in pipe jacking, tunnelling, or mining works preferred
• Knowledge of safety regulations and geotechnical construction standards

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

• Experience in handling support & installation for Finacle 10.x environments including troubleshooting and configuring new services
• Ability to take ownership of deliverables and engaging all stakeholders
• Proficient in N-tier architecture for Finacle, high availability concepts
• Proficient in writing SQL queries in Oracle/PostgreSQL for troubleshooting issues and preparing data for issue analysis and reporting
• Hands on with Unix/Linux commands
• Basic proficiency in Middleware technologies like WebSphere Application Server and JBOSS
• Hands on experience in automating some of the routine tasks in environment management
• Experienced in handling patching of Finacle, OS, MW and database components. Should be able to perform impact assessment and co-ordinate the tasks with various supporting units like OS support, DB support, Middleware support, etc.
• Familiar with environment maintenance tasks like source refresh across environments, data refresh across environments and familiar with CICD concepts

Requirements
Finacle 11.x experience. Should have 6+ Years of Experience

Knowledge of Kafka, Redis and PostgreSQL

End to end setup experience in Finacle in versions 10.x or 11.x

Production environment support and familiarity with change management process

Service Engineer (CCTV & Security Systems)

☑ Good Bonuses

☑ Near MRT

☑ Family Friendly Environment

Job Description:

• Design, implement, and support enterprise network infrastructure.
• Deliver network solutions and infrastructure projects.
• Monitor, troubleshoot, and optimize network performance and security.
• Manage technology lifecycle, documentation, and operational support.

Requirements:

• At least a Diploma with at least 4 years of network engineering experience.
• Strong knowledge of routing, switching, security, and network protocols.
• Hands-on experience with Cisco, Check Point, Palo Alto, and Fortinet technologies.
• CCNP and firewall certifications preferred, with strong troubleshooting skills.

Loh Puay Hwee David

EA License | 24C2215

EA Registration Number | R1766892

As a Senior/Staff LithographyProcess Engineer, you will lead the development and optimization of lithographyprocesses for both Fan-In and Fan-Out eWLB (Embedded Wafer Level Ball GridArray) packaging technologies. You will be responsible for driving keyengineering projects such as yield improvement, cost reduction, and processtransfers across global manufacturing sites.

Key Responsibilities:

• Own and optimize lithography processes for PI, PR, and other patterning layers in both FO and FI eWLB.
• Manage photolithography tools (GHI/i-line stepper, coat/develop tracks, etc.), including recipe setup and troubleshooting.
• Lead cross-functional projects focused on cost reduction, process robustness, and NPI transfer.
• Lead process improvements to enhance yield, throughput, and cost efficiency.
• Evaluate and implement new lithography materials (PSPI, PR) and tools.
• Define and maintain process documentation (SOP, OCAP, FMEA, SPC) and training programs.
• Collaborate with equipment vendors, materials suppliers, and internal engineering teams to evaluate and qualify new tools or materials.
• Design and perform DOE, root cause analysis, and statistical data analysis (e.g., JMP, Camline, etc.).
• Support daily fab operations with issue resolution and yield improvement initiatives.
• Mentor junior engineers and provide technical direction to the litho team.
•  

Qualifications:

• Bachelor’s or Master’s degree in Engineering (Materials, Chemical, EE, or related field).
• 5+ years hands-on experience in photolithography process, preferably in advanced packaging (eWLB, WLP, FO-PLP).
• Strong knowledge of lithography tooling, including exposure systems and coater/developer tracks.
• Skilled in project management, process transfer, and cost/yield improvement.
• Familiar with SPC, FMEA, and problem-solving methodologies.
• Excellent communication skills, with proven ability to engage with both internal stakeholders and external customers.
• Fluent in both English and Chinese. (This role will need to liaise with customers and counterpart from China)

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Diploma in Aersopace Engineering or relevant
• Minimum 2 years of working experience as Licensed Aircraft Engineer with ATR

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of developing and implementing new optic / illumination components/system
• Responsible for designing and developing automated visual inspection systems for a full range of semiconductor equipment. 
• In charge of resolving existing optical/illumination issues within the equipment.
• Identify necessary and desirable improvements for vision optical system performance.

Job Requirement:

• Minimum Degree in Optics Engineering, Physics, Photonics, or a related field is required.
• Minimum with 5 year working experience in optical design software, alignment, testing, and high magnification optics.
• Knowledge of LED illumination systems, lenses, specifications, design trade-offs, and basic optics modeling techniques
• Experience in 2D drawing

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Develops and optimizes BCD process technology and devices for power applications, involving TCAD simulations, device layout, characterization, and bench testing
• Develop and integrate new BCD device architectures and process modules for company BCD platforms.
• Conduct TCAD simulations to understand device behavior and calibrate simulation models to match experimental results.
• Design and lay out device test structures and new BCD device platforms.
• Analyze device performance and reliability through bench testing and data collection.
• Work with cross-functional teams, including the modeling team, to satisfy customer needs and develop advanced device models.

Job Requirement:

• Min Degree in Physics or Electrical Engineering.
• Min 3 year of expereince in TCAD (Technology Computer-Aided Design) tools for simulation and calibration.
• Experience with device layout, design rule checks, and test structure generation.
• Knowledge of BCD process development and device characterization techniques.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description

• Responsible for integration and implementation of both hardware and software engineering work
• Carry out proper planning, execution and supervision of the integration work and do QA technical checks throughout the project execution
• Handle application programme change management, hardware deployment management and documentation
• Implementation of PLC/SCADA project from concept to design and programming
• Interface with SCADA and PLC programming
• Meeting with clients, doing reports and documentation
• Perform troubleshoot independently

Requirements

• Min Nitec in Mechatronics, Electrical or Electronics
• Possess a Singapore Class 3 or 3A Driving License
• knowledge in PLC and SCADA

To submit your application, please apply online apply@rn-care.com or call +(65) 6514 9838 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• Perform regular checks and diagnostic activities on security systems (such as CCTV and access control) to ensure they are in good working condition.
• Set up security equipment, configure systems, and conduct testing on-site.
• Provide both front and backend support for security, video management systems (e.g., Milestone XProtect), and communication infrastructure.
• Attend to, diagnose, and resolve onsite technical issues/faults within established Service Level Agreements (SLAs).
• Prepare daily maintenance reports and maintain accurate records of service activities.
• Comply with company policies and safety regulations, ensuring work does not interrupt production.

Requirements

• Min Nitec in Information Technology, Computer Engineering, or related technical fields.
• Basic knowledge of IT networking, security systems, and troubleshooting

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Keysight is at the forefront of technology innovation, delivering breakthroughs and trusted insights in electronic design, simulation, prototyping, test, manufacturing, and optimization. Our ~16,800 employees create world-class solutions in communications, 5G, automotive, energy, quantum, aerospace, defense, and semiconductor markets for customers in over 100 countries. Learn more about what we do.

Our award-winning culture embraces a bold vision of where technology can take us and a passion for tackling challenging problems with industry-first solutions. We believe that when people feel a sense of belonging, they can be more creative, innovative, and thrive at all points in their careers.

Keysight's Aerospace and Defense business unit seeks an experienced engineer with a strong track record and credentials showing deep expertise in 5G test and emulation challenges and knowledge of Keysight’s wide range of solutions to successfully generate and close business opportunities with a focus on the Asia Pacific region.

This position is focused on identifying and developing new customer engagements in the Aerospace/Defense industry that require expertise in wireless telecom systems with emphasis on 5G and proprietary Non-Terrestrial Networks. Some prior industry experience with satellite network operators is highly desired. You will be expected to initiate and lead successful business opportunities, often requiring extensive evaluation of Keysight solutions by customers. Key product lines include Base Station and UE emulators and protocol analyzers (PL13) and channel emulators (PL DI).  

Responsibilities:

• Identify customer prospects that could benefit from Keysight’s existing portfolio of capabilities related to simulation and emulation of terrestrial and non-terrestrial network conditions.
• Partner with Keysight’s Field Account Management teams to initiate new customer relationships, through indirect (via LinkedIn) as well as direct encounters (trade-shows, technical seminars, or by invitation from the customer)
• Learn the customer’s problem set, and quickly identify areas where Keysight can immediately add value. Win agreement to collaborate within a specific timeframe and establish a clear timeline for business outcomes.
• Once an opportunity has been qualified, lead the formation of a team to plan and execute the project. Will require partnering with Protocol CoE R&D, Eggplant R&D, and Keysight Labs resources.

Basic Qualifications: 

• Bachelor of Science in Electrical Engineering and Computer Science.
• 5-7 years' experience directly supporting customers doing wireless network design, testing / emulation and/or quality of service monitoring.

Desired Qualifications:

• Master of Science degree. Project Management Credential not required.
• Prior experience with Keysight test and emulation products and instruments is a plus.

You are responsible for new equipment introduction, risk assessment, equipment set-up, release, PM, Calibration, lab audits and as well as continuous improvement activities such as equipment reliability improvement, cost reduction, and equipment usage optimization. Through this role, you will enhance your technical skills in equipment management and improvement, project management, and strengthen your engagement and network with vendors and global GEL organizations across Micron sites.

Responsibilities

-Support GEL Equipment and lab operations including Internal and External audits, ESD and PM, Calibration, equipment troubleshooting, Safety and Chemical controls.

- Oversees the installation, modification, upgrade and maintenance of Engineering equipment.

- Maintains current records on equipment manufacturers’ technical notices, upgrades and safety issues. Studies equipment performance and reliability. - -- Establishes programs and solutions for increasing uptime and for equipment problems that affect the engineering process.

-Provides technical support to the engineering equipment repair and process engineering organizations. Defines and writes preventative maintenance schedules.

- Collaborate with cross functional teams on equipment requirements, space planning, facilitation, purchase and installation of equipment.
- Equipment inventory controls and critical spare parts planning.

- Coordinate external vendors on training, repair, and preventive maintenance of equipment.
- Manage external vendors expectation, set and assess goals and achievements.
- Analyze and support stakeholders’ requirements and expectations.
- Foster closer collaboration amongst cross functional teams.
- Focus on customer needs and provide timely solutions.

Requirement

• Bachelor's degree in engineering with experience with ESD checks

• At least 1 year of experience in Semiconductor Equipment or Tools PM, calibration, and troubleshooting.

• Knowledge with Automated Optical Inspection and ANSYS Simulation