Total 13,271 job vacancies in Singapore

Job Title: Service Engineer / Service Technician (ID1516)
Location: Yio Chu Kang
Working Hours: Mon to Fri 8.30am to 5.00pm
Salary: $3000 - $3500

Job Responsibilities:
• PLC programming
• Handling automation machines
• Troubleshooting mechanical/electrical equipment
• Testing mechanical/electrical components
• Modules Over-head bridge cranes preparation for commissioning, filling gear oil, bearing greasing, setting limit switch travelling & hoisting, overload trip setting & testing.
• Top side equipment cooling medium system preparation for commissioning, fresh water close circuit system flushing by using screen on plates type coolers to catch impurity and dirt, Glycol filling to cooling medium system through hull drain tank & expansion tank.
• Testing Cooling medium pumps no load & system load run.
• Glycol regeneration system preparation for commissioning, system flushing, hydro testing, Glycol filling & system running.
• Gas Dew point control- Refrigerant system preparation for commissioning, system flushing by nitrogen, hydro testing, Refrigerant charging to Gas skid & Compressor skid, and system running
• Supervised on Multi-disk writer manufacturing process. HUB(Mechanic Parts) balancing and testing, check inventory, calibrate instruments, draw the schedule and troubleshooting the machine.
• Plan and assign team members to safety and productivity.
• Perform testers conversion from product to product.
• Testing, trouble shooting and online the testers to production.
• Liaised with process group, automation group and production group to achieve a target yield and productivity.

Must have requirements as per the below



Strong knowledge in AS400 RPGLE, CLLE and supported full SDLC cycle.
Strengths in root cause analysis and solutioning
Good communication skills

Responsibilities:

• Perform root cause analysis on application defects and provide solution for remediation.
• Prioritize defects and plan for production release based on defect criticality or align with quarterly releases
• Perform program code development, support end-to-end testing in SIT, UAT and deployment to Production environments.
• Maintain production stability by ensuring deployments have completed the necessary risk and impact assessments.
• Communicate in a clear, concise, and timely manner to stakeholders with respect to application related issues or queries.
• Assist production level 2 support with the investigation, root cause finding and feasibility of recovery approach as and when required.
• Follow up on defect closure and meet defect closure KPI
• Share production defect support learning with internal teams to improve quality and minimize future defects of application delivery
• Ensure application documentation is properly updated for each production release

Requirements:

Education:

• Bachelors’ Degree in Computer Science or related field.
• 3 or more years’ of Production Support L3 experience across multiple technologies / platform
• Strong troubleshooting and problem solving skills
• Strong written, oral communication skills and able to manage user / vendor / customer
• Has experience with end-to-end development following SDLC
• Ability to easily adopt to any technology / environment
• Experienced and have good understanding in Core Banking modules
• Preferable with knowledge of bulk file transactions and payments domain
• Familiar with incident and problem management process
• Familiar with agile methodologies

Key Domain/ Technical Skills:

(Indicate up to 3 areas)

• Technically sound in AS400 platform & RPG/LE, CL/LE, COBOL400, SQL and Query400.

• Identify, evaluate, and pursue new business opportunities and developing strategies to increase sales.
• Actively develop commercial prospects and convert leads into execution.
• Ensure all prospects and leads are accurately updated.
• Work closely with operations teams to ensure smooth and effective service execution.
• Develop and maintain strong working relationships with customers.
• Monitor customer satisfaction and ensure timely NPS update.

Joy Yeow Zhi Qian
(CEI Registration No: R2096261)
Recruit Express Pte Ltd (EA Licence No: 99C4599)

• Responsible for direct sale of vacuum pumps, systems, parts and services in Singapore.
• Break new grounds and penetrate the key industries as in; Food Packaging, Medical, Petrochemical, Chemical, Automotive, Pharmaceutical, Electronics, Semiconductor
• Undertake the role to develop new and key accounts and strive towards achieving sales goals and objectives.
• Engage the customers on a day-to-day basis to initiate and coordinate sales activities.
• Responsible for quarterly Sales forecasting and meeting monthly and yearly “Sales” target for Singapore region.
• Track and report sales activities using CRM system.
• Handle sales inquiries and generate proposal to customers for sale of pumps, repair, field service and spare parts.
• Create sales leads, follow up on sales opportunities and take ownership to follow up on quotations.
• Working closely with customers to find application possibilities and propose suitable technical solutions.
• Conduct competitive analysis and identify market price for various customers and market segments in Singapore.
• Conduct product and application training.
• Other adhoc duties as assigned

Joy Yeow Zhi Qian
(CEI Registration No:R2096261)
Recruit Express Pte Ltd (EA Licence No: 99C4599)

Job Responsibilities

·      Assist in the selection of competent suppliers and sub-contractors for our construction works

·      Measure and determine the amounts of work done at any stage of the construction so as to prepare periodic progress payment requests for clients

·      Check and evaluate the progress claims submitted by the sub-contractors in liaison with Project Manager / designated staff, ensuring accuracy in quantities and quality

·      Support Senior QS in overseeing construction contracts and administration, from progress claims, to determining variation orders, EOT claims, etc.

·      Assist in the settlement of final accounts with clients, suppliers and subcontractors

·      Exhibit a clear understanding of timelines and manage tender activities effectively

·      Communicate effectively with in-housearchitects, project managers and on-site staff to perform necessary progressclaim, contractual execution duties

·      Site visits and supplier visits toverify work, materials, and proposals as needed

Job Requirement

·      Bachelor’s Degree in QuantitySurveying/Building or equivalent from a recognized University

·      Minimum 2-5 years of working experience in Main-Con Company Experience in landed properties construction highly preferred (in Singapore)

·      Collaborative mindset, willingness tolearn, and keen attention to detail

·      Literate with Microsoft Excel,Projects, Word

·      Open to Singapore PRs and Citizens only

Role & Responsibilities

• Collaborate with clients to understand their vision, preferences, and lifestyle needs.
• Provide expert advice on space planning, layouts, and aesthetic design solutions.
• Develop detailed design briefs and project schedules to ensure seamless execution.
• Work alongside our visualization team to produce stunning 3D renderings and presentations.
• Take ownership of projects from concept to completion, serving as the key client liaison.
• Coordinate with suppliers, contractors, and regulatory agencies to ensure smooth project delivery and compliance with all regulations.
• Conduct on-site inspections with the Project Manager to uphold exceptional quality standards.

What We're Looking For

• A creative visionary with a sharp eye for design details and innovation.
• Proven ability to juggle multiple projects, meet deadlines, and stay organized.
• A proactive problem solver who takes ownership of tasks and strives for excellence.
• A strong team player who thrives both independently and collaboratively.
• Proficiency in AutoCAD and Microsoft Office.

Qualifications & Experience

• Diploma/Degree in Interior Design or a related field.
• At least 2-3 years of professional experience in interior design.

Job Description

• Achieve sales targets set by management.
• Develop new accounts & grow customer base.
• Maintain and manage excellent customer relationships, ensuring timely delivery and understanding of customer needs.
• Build rapport and maintain good network with homeowners, interior designers & contractors in the retail market.

Job Requirement

• Minimum 1 Year of Experience (Working experience in renovation/ material supplier/ interior design field is preferred)
• Must be self-driven, possess good communication skills and a good team player.
• Possess own vehicle (Required to travel frequently around Singapore)

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or submit your resume to ref71@trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lee Jia Xiang

EA Personnel Reg No: R25158171

Job Description

• Design and implement ETL/ELT pipelines and data workflows
• Manage and maintain scalable data warehousing solutions
• Ensure data quality, consistency, and integrity across sources

Requirements

• 0 to 1 Year Experience in Data Engineering
• Polytechnic Diploma or Degree in Computer science/Data Science is essential
• Freshers with strong SQL and Python scripting will be considered
• Willing to learn new technologies and undergo rigorous training
• strong communication skills and ability to work in a team is essential

• Position: Electrical Engineer

• Location: PSA Terminal/Local Shipyards

• Working Hours: Monday to Friday (8.30am - 5.30pm)

• Salary (commensurate with experience): Up to $4,500 + OT Payable + Variable Bonus

• Duration: Permanent

• Industry: Shipbuilding and Engineering

Main Responsibilities:

• Troubleshooting and maintenance of marine engine control system electrical and automation systems

• Attend vessel service jobs onboard ships and shipyards

• Prepare service reports and technical documentation

• Support commissioning, repair, and testing activities

• Coordinate with customers, service engineers, and project teams

Requirements:

• Possess Diploma in Electrical Engineering or its equivalent

• Minimum 3 years working experience in the marine industry

• Experience in marine engine control systems, automation, troubleshooting, or electrical maintenance is preferred

• Able to attend onboard vessels and overseas assignments when required

Email to: abby.pang@searchpersonnel.com.sg for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Install, maintain, troubleshoot, and repair equipment at customer sites.
• Provide technical support and ensure high customer satisfaction.
• Perform preventive maintenance and document service activities.
• Ensure compliance with safety and operational procedures.
• Support on-site activities in cleanroom environments when required.

Requirements:

• Diploma or Degree in Mechanical, Electrical, Electronics Engineering, or related discipline.
• Minimum 2 years of field service, maintenance, or technical support experience.
• Basic PCB or software knowledge are welcome to apply.
• Strong troubleshooting and problem-solving skills.
• Comfortable working independently at customer sites.
• Willing to work shifts, travel, and support on-call assignments when required.

By sending your job application/resume to us, it shall be deemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)

Posting Personnel: Quennie Chen

EA Personnel Reg No.: R1222837

A Piling sub-contractor company specialized in Bore-Piling and Soil Foundation Engineering works looking for suitable candidates for the above positions :

Requirements

• A degree holder in Civil Engineering
• Minimum 3 years working experience in bore-piling operation
• Able to work in robust environment
• Can work with multi-national workforces
• Own a personal transport is an advantages.

As an AI Engineer Intern, you'll be part of a dynamic team focused on developing, refining, and deploying core AI features for our proprietary AI-driven products and solutions. You'll bridge the gap between AI research and application, translating innovative concepts into tangible, impactful features.

Key Responsibilities:

• Collaborate with cross-functional teams to design, develop, and implement AI features, focusing on areas like natural language processing, data analysis, and predictive modeling.

• Conduct research and rapid prototyping of the most suitable AI algorithms and techniques based on best practices, particularly those involving LLMs to address technical and business requirements.

• Write clean, well-tested, and well-documented code, contributing to efficient and maintainable system components.

• Contribute to the project's foundational knowledge by documenting the shared technical understanding and implementation details aligned with high-level business requirements and project goals.

Qualifications:

• Currently pursuing a Bachelor’s or Master’s degree in Computer Science, Software Engineering, Data Science, Artificial Intelligence or a related field.

• You are a team player that enjoys collaborating and communicating with diverse groups.

• You enjoy tackling large challenges and enjoy discovering problems as much as solving them.

• You are able to problem solve and adapt to changing priorities in a fast-paced dynamic environment.

• Able to commit to a 6 months full time internship duration.

• This is a full work-from-office (WFO) internship.

Skills You’ll Need to Bring:

• You have built or prototyped features with AI technologies (LLMs, Embeddings, Fine-Tuning).

• You have experience in agentic frameworks (e.g., ADK, LangChain) for building LLM-powered applications.

• You have strong technical skills in Python.

• You are adept at optimizing, refactoring, and improving Python code, ensuring our systems are efficient, scalable, and maintainable

Nice to Haves:

• Hands-on experience with cloud platforms (GCP).

• Demonstrated interest in advanced AI topics such as Reinforcement Learning (RL).

• Familiarity with processing multi-modal data (audio and video).

• Familiarity with Agile development methodology and collaboration tools (e.g., JIRA) for task management and sprint planning.

M&E Coordinator/Engineer

Job Responsibilities:

Assist Project Manager in supervising and coordinating all services and complete within programme

Manage M&E subcontractors to execute mechanical and electrical works in construction

Supervise M&E subcontractor day to day site works

Conduct in detailed, M&E coordination with all specialist contractors

Carry out testing and commission of M&E work

Ensure contractor comply with all necessary standards, code of practice and safety regulations

Any other adhoc duties as assigned

Job Requirements:

Diploma / Degree in Mechanical & Electrical Engineering or equivalent

3-5 years of relevant experience in supervision of M&E works installation

Able to work independently

TLAE will undergo 60 months structured program to become LAE

Job Duties of an LAE

Job Description

·      Day to day routine maintenance & rectification of aircraft defects

·      Ensuring all work is carried out in accordance with approved maintenance data, company, authority and customers’ requirements

·      Performing aircraft release to service certification(CRS) for maintenance and repair of aircraft according to the Company authorization issued by Quality Department

·      Assisting in the forecasting of manpower, spares &equipment needs

·      Ensuring that all staff under his control observes safety precautions, reporting of unsafe working condition & operation

·      Assisting in the investigation of incident/accident reports and ensuring corrective actions are implemented

·      Ensuring that tools & equipment under his control are properly maintained, calibrated and correctly used for the jobs

·      Ensuring action is taken at all times to maintain the aircraft on schedule

·      General supervision, control & discipline of staff under his charge

·      Performing other duties, as and when required

Requirements:

·      Minimum full time Diploma or Degree in Mechanical /Electrical & Electronics Engineering

·      Training period is 36 months (inclusive of on-the-job training)

·      Trainees will be bonded for the duration of training and 5 years thereafter

·       Training programme will commence in October 2026

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported revenue of over $12b in 2025 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Best-in-Class Asia Pacific Index

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Summary

The role leads setups, configurations, installations, and development on assigned projects, ensuring timely delivery and compliance with technical and safety standards.

Responsibilities

• Coordinate site execution activities by assisting the Project Manager to implement, monitor delivery, conduct site installation, inspection, and handover according to project schedules
• Report project progress and issues promptly to the Project Manager
• Manage daily deliverables and performance of subcontractors on site
• Set up and configure security systems including Access Control Systems and CCTV to meet project requirements
• Monitor and update site progress reports to reflect current status accurately
• Attend site safety and progress meetings to ensure compliance and alignment with project goals
• Handle permit applications and secure approvals from relevant authorities to maintain project compliance
• Document installation method statements and prepare site drawings for project records and reference
• Collaborate with Systems Engineer to develop security systems such as Access Control and CCTV solutions
• Conduct proof-of-concept testing and commissioning of security systems to validate functionality and performance
• Prepare project submissions, system designs, and installation drawings to support project execution and approvals
• Ensure all implemented work and systems conform to contract specifications and technical requirements
• Perform frontend equipment QR code tagging to facilitate asset tracking and management
• Comply with company governance procedures and workplace safety regulations at all times
• Perform additional duties as assigned by Supervisor or Manager to support project success

Required competencies and certifications

• Strong technical knowledge and certification on in-house security products to ensure competent system setup and troubleshooting
• Ability to work independently within guidelines and defined procedures while making decisions on assigned tasks
• Capability to solve problems effectively within established guidelines to maintain project progress and quality
• Ability to communicate clearly with customers and stakeholders to address enquiries professionally and provide user support
• Willingness and ability to be stationed at construction sites to oversee project execution and installation activities

Preferred competencies and qualifications

• Understanding and knowledge of the Singapore security and surveillance sector, including its operating environment, limitations, and applications
• Mechanical and Electrical (M&E) knowledge and experience to support integrated system installations
• Skills in troubleshooting technical issues related to company products to resolve operational challenges
• Skills in engaging and servicing end-users with a collaborative, win-win mindset to foster positive relationships
• Negotiation skills with end-users on non-critical product maintenance requirements to facilitate service agreements
• Skills in preparing materials and delivering presentations in small group settings such as user demos, training, and customer presentations

System Engineer

Job Descriptions:

• Plan and design CCTV network infrastructure and effective surveillance coverage

• Install, configure, and commission IP cameras, DVRs/NVRs, video management systems (VMS), and associated hardware/Software
• Configure and maintain routers, switches, VLANs, VPNs, and PoE networks supporting camera infrastructure
• Establish high availability VPN connectivity across multiple CCTV sites
• Monitor CCTV and network performance, diagnose issues, and perform proactive maintenance
• Apply firmware updates, security patches, and resolve vulnerabilities in network devices
• Work alongside CCTV, access control, and IoT teams to integrate solutions into wider security platforms
• Perform site surveya, risk assessments, and recommend enhancements
• Maintain detailed documentation and network topology diagrams
• Train clients and internal Team on CCTV system operation, maintenance, and security best practice
• Ensure adherence to standards such as ONVIF, NSI, MOI SSD and local regulations

Job Requirements:

• Diploma or Bachelor's in Computer Science, Electrical/Electronic Engineering, or related field
• Certifications: Cisco (CCNA/CCNP), COMPTIA security+, HiKvision, Axis, Milestone, or equivalent
• 3-7 years in CCTV system deployment and network engineering
• Proven expertise in configuring IP Camera systems and video surveillance infrastructure

Prefer Technical experience in below skills:

• Networking: TCP/IP, VLAN, PoE, WAN/LAN, QoS, VPN, Multicast routing, HA Protocols (VRRP, HSRP)
• Security technologies: IPSEC, UTM, Firewalls, and Cybersecurity beat practices
• Proficiency with Wireshark/Sniffer tools and Linux environments
• Experience with any CCTV platforms: Dahua, HiKvision, Uniview, HiKcentral, Bosch, Milestone will be added advantage

Our esteemed client in the Manufacturing industry is seeking a Technical Sales Engineer (HVAC) to join their dynamic team:

• Employment Type: Permanent
• Position: Sales Engineer
• Location: Kaki Bukit
• Working Hours: Monday to Friday, 8am to 5.30pm
• Salary Package: Basic + Commission

Job Responsibilities:

• Actively prospect and engage clients to promote and sell HVAC and ATCS solutions. Close deals and consistently achieve revenue targets to drive market growth.
• Serve as the technical expert for ATCS during client presentations. Analyze technical requirements and recommend tailored, energy-efficient solutions.
• Manage the end-to-end tender process. This includes attending tender briefings, conducting site visits, and preparing highly detailed technical proposals and RFPs.
• Calculate accurate Bills of Quantities (BOQs), select appropriate equipment, and ensure technical specifications align with project requirements.
• Optimize HVAC solutions to balance client needs with internal cost control, ensuring healthy profit margins and competitive pricing.
• Act as the vital link between the client, internal engineering teams, and external vendors to ensure a seamless transition from pre-sales to project implementation.

Job Requirements:

• At least Diploma in Mechanical Engineering or related field, with minimum 1 year of sales experience in HVAC, cooling systems, or industrial equipment.
• Strong technical understanding of mechanical systems (e.g. cooling towers, chillers, heat exchangers)
• Experience in tendering, proposal preparation, and cost estimation is an advantage

Ready to apply? Here’s how: 

• Click the APPLY button, or 
• Email your resume (in MS Word or PDF format) to adelin@intuitrecruitment.com. Include the job title in your email subject line for prompt processing. 

Only shortlisted candidates will be notified. 

By submitting your application, you consent to the collection and use of your personal data under Personal Data Protection Act (PDPA). 

Adelin Chong | EA Personnel Reg No.: R1875641 

Intuit Recruitment Pte Ltd | EA License No.: 25C2793 

1. Engineering Specialist (Project Coordinating)/$2,800 - $3,800 @Chai Chee

• Assist design, development, testing, and implementation of engineering projects.

• Support troubleshooting and resolution of technical issues.

• Prepare and maintain engineering documentation, reports, and technical records.

• Routine inspections and quality control checks to ensure compliance with specifications.

• Assist project planning, scheduling, resource allocation & collaborate with teams to execute projects.

• Conduct tests, analyze data, and recommend improvements to engineering processes.

• Support development of prototypes and product designs.

• Assist in equipment installation, maintenance, and system integration activities.

• Diploma in Mechanical/Electrical with knowledge in PLC system.

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang
EA Personnel No: R21102570
EA License No: 23C1894

Company Overview

Apartment Private Ltd is a boutique interior design and renovation firm passionate about creating unique, thoughtfully designed residential and commercial spaces. We value creativity, craftsmanship, collaboration, and continuous learning in a supportive work environment.

Job Summary

Join Apartment Private Ltd as an Interior Designer or Design Assistant, contributing to diverse projects by developing concepts, producing technical drawings, and collaborating with clients and contractors. Grow your career with mentorship and leadership opportunities.

Responsibilities

• Develop and support design concepts, space planning, and mood boards tailored to client needs
• Produce detailed technical drawings, material boards, and 3D visualizations to communicate design intent
• Engage with clients to gather requirements and present compelling design proposals
• Collaborate effectively with contractors and suppliers to ensure seamless project execution
• Conduct site visits, inspections, and participate in project meetings to monitor progress and quality
• Research and apply current design trends, finishes, and sustainable practices to projects
• Adapt responsibilities based on experience, from assisting in design research to independently leading projects

Preferred competencies and qualifications

• Demonstrate strong passion for interior design with creativity and meticulous attention to detail
• Exhibit effective communication skills to foster collaboration within teams and with clients
• Show eagerness to learn new skills (for entry-level) or confidence in managing projects (for experienced)
• Possess familiarity with design software such as AutoCAD, SketchUp, and Adobe Suite; training provided for new learners

The Deputy Design Manager is primarily responsible to lead the coordination within the technical team (Structural, Architectural and M&E). Besides identifying and resolving design, specifications, construction methodology, sequencing and maintenance issues, balancing contractual obligations, statutory requirements, site progress and product workmanship while ensuring that timely progress of works on site with timely issuance of shop drawings, the Architect will also interface with the Consultants, Client and/or Authorities to ensure the timely resolution of such issues.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Leads the coordination of the technical departments within the office.
• Drives and monitors the production of schematic design, design development and construction documents i.e. shop drawings, material approval, mock-ups etc.
• Collaborate with Architect and consultants to amicably resolve design and technical issues.
• Aligned with Woh Hup Building Information Modeling / (BIM) / Virtual Design and Construction (VDC) implementation roadmap.
• Drive to improve the skillsets of the technical departments through trainings and knowledge sharing
• Adherence to safety practices in the workplace.

Qualifications and Education Requirements

• Education: Minimum Degree in Architecture or relevant field.
• Experience: Minimum 8 years of experience, preferably to have been full time assigned or has led a major aspect of the project.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity
• Strong communication and interpersonal ability, coupled with influencing skills
• Independent and a self-starter, with strong personal drive to initiate and implement

Technical Competencies

• Proficient in the understanding of the requirements of relevant authorities (ie BCA, SCDF, LTA)
• Proficient in the understanding of various Forms of Contracts (i.e. Singapore Institute of Architects (SIA), Public Sector Standard Conditions of Contract (PSSCOC), Real Estate Developers' Association of Singapore (REDAS) etc)
• Proficient in technical knowledge of construction and material

Job Description:

This position requires minimum 10 years of localexperience in same field / sector, with good business knowledge in this sector.

• Combine service drawing knowledge with AutoCAD skills to do presentations to clients
• Familiar with project specifications and technical clarifications and prepare method statements and check drawing discrepancies
• Prepare Coordinated Services Drawing (CSD), penetration drawing and coordinate with client team, attend progress / site / MEP meeting
• MEP design experiences are must with more client interaction knowledge
• Responsible for project delivery including engineering, schedule, budget, coordination and site supervision
• Supervise the M&E work and coordinate with clients’ representatives, consultants and subcontractors on technical matters
• Ensuring Supervisor & Foreman meets client & regulatory work requirements
• Attend, Conduct and Record the coordination meeting with all M&E with team, client and other trade subcontractors
• Liaise and coordinate with clients, authorities, consultants and M&E subcontractors and suppliers on the schedule of work and delivery of materials to meet the project requirements
• Supervise and inspect all M&E work and coordinate with other trades subcontractors
• Coordinate and arrange for testing and commissioning of M&E systems including the handover of all warranties, operating and maintenance manuals etc
• Carry out project planning, design, material requisition, cost control, project supervision and documentation
• Ensuring environmental, safety and health practices are carried out at all time
• Excellent understanding and hands-on experience with building management systems (BMS) / building information modelling (BIM) and controls and their integration with data centre infrastructure
• Extensive experience with large-scale chilled water plants including chillers, chilled water distribution, chilled water-cooling plants and storage systems, cooling towers
• Troubleshooting and repairing of ACMV and its control equipment
• Diagnose and resolves complex technical issues related to Daikin air conditioning systems
• Any other ad-hoc duties as assigned

Job Requirement:

• Minimum Degree/ Diploma in Engineering from recognised local University.              (preferably BCA Academy (Singapore))
• Minimum 10 years of relevant working experience in the same sector.
• Willing to be posted to oversee projects in countries like India etc
• Proficiency in MS office tools, Microsoft project, Presentation, AutoCAD and/or BIM.
• Good communication and interpersonal skills
• Additionally having local experience in same field / sector, with good business
• Contacts in this sector to develop new business opportunities is a plus
• hands-on experience with mechanical and control systems, including fuel systems, building management systems (BMS) and controls, chilled water-cooling plants
• Hands-on experience in ACMV Chiller System installation, operations, maintenance, and repairs large-scale commercial cooling systems. (Primary focus is to ensure central cooling systems, such as water-cooled or air-cooled chillers, cooling towers, and Air Handling Units (AHUs), run safely, continuously, and at peak energy efficiency)

Please include your availability date and expectedsalary in your resume. We regret only shortlisted candidates will be notified

• Position: Sales Engineer

• Location: Kallang

• Working hours: Mondays to Fridays (8.30am - 5.30pm), Saturday (8.30am - 12.30pm); (One Saturday/month upon confirmation) 

• Salary (commensurate with experience): Up to $5,000 Basic Salary + Phone Allowance + Transport Allowance + AWS + Variable Bonus

• Duration: Permanent

• Industry: Pump manufacturer

Main Responsibilities:

• Grow and service existing accounts 

• Attend to sales enquiries, sales support and site related matters 

• Visit customers at their work place/office 

• Assist to monitor payments from customers 

• Any related ad-hoc duties assigned by management 

Requirements:

• Possess NiTEC or Diploma in Mechanical / Electrical Engineering, Mechatronics or equivalent

• At least 1 year of experience with pumps and systems is preferred

• Possess class 3 driving license

Email to: abby.pang@searchpersonnel.com.sg for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Low-Voltage Electrical Engineer

• Up to $4,500 basic + variable bonus.

• Location: Vision Exchange, Jurong East

• Working Hours: Monday to Friday, 9:00 AM – 6:00 PM

• Exposure to innovative marine electrification, hybrid propulsion, and energy storage projects.

• Opportunity to work with leading shipyards, vessel owners, and global equipment suppliers.

We are seeking a motivated and hands-on Electrical Engineer. This role offers the opportunity to work on cutting-edge electrical power systems, battery energy storage solutions, vessel automation, and propulsion integration projects from concept through to commissioning and vessel delivery.

Key Responsibilities

Project Management & Execution

• Lead and manage marine electrical and hybrid vessel projects from project kick-off to final delivery.

• Develop, monitor, and coordinate project schedules, milestones, deliverables, and resource planning.

• Work closely with shipyards, shipowners, equipment manufacturers, system integrators, and classification societies.

• Ensure projects are delivered in accordance with contractual, technical, safety, and regulatory requirements.

• Identify project risks and implement effective mitigation strategies.

• Monitor project budgets, variation orders, and cost performance.

Engineering & Technical Support

• Review and coordinate engineering deliverables including:

  • SingleLine Diagrams (SLD)

  • Load flow and short-circuit calculations

  • Protection coordination studies

  • General arrangement drawings and system layouts

  • I/O lists and interface documentation

• Oversee the integration of:

  • DC and AC switchboards

  • Battery Energy Storage Systems (BESS)

  • Power Management Systems (PMS)

  • Alarm Monitoring Systems (AMS)

  • PLC control systems

  • Variable Frequency Drives (VFD)

  • Electric and hybrid propulsion systems

• Ensure compliance with marine classification requirements such as DNV, BV, RINA, CCS, and other relevant standards.

• Provide technical guidance and resolve engineering issues throughout design, construction, and commissioning phases.

Supplier & Stakeholder Management

• Act as the key technical liaison between project stakeholders, suppliers, shipyards, and classification societies.

• Review vendor documentation and coordinate approvals and submissions.

• Support Factory Acceptance Tests (FAT), Harbour Acceptance Tests (HAT), commissioning activities, and troubleshooting.

• Coordinate installation and integration activities to ensure successful project execution.

Commercial & Project Support

• Support tender preparation, technical proposals, and quotation activities.

• Review technical specifications and identify project cost implications.

• Assist with technical clarifications, variation orders, and contract administration.

Site Supervision & Commissioning

• Attend shipyard meetings and project coordination sessions.

• Supervise installation, testing, and commissioning activities.

• Coordinate mooring trials, harbour trials, and sea trials.

• Ensure successful vessel delivery and handover documentation.

Documentation & Reporting

• Maintain accurate project records and document control systems.

• Prepare project progress reports and technical updates for management.

• Ensure proper archiving of engineering documentation and as-built drawings.

Requirements

• Diploma or Degree in Electrical Engineering or a related discipline.

• 2 years of experience in electrical engineering, design, drafting, or project execution.

• Experience within the Marine, Offshore, Oil & Gas, Shipbuilding, or related industries is essential.

• Knowledge of low-voltage power distribution systems and electrical engineering principles.

• Experience preparing singleline diagrams, wiring diagrams, cable schedules, and equipment layouts.

• Proficient in AutoCAD and electrical drafting software.

• Familiarity with switchboards, motor control centres (MCC), distribution boards, and power distribution equipment.

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

Job title: Manufacturing Engineer - CK Job ID:20226

Location : West (Tuas)

Basic up to $4,000 + AWS bonus + Variable Bonus

Job responsibilities:

-Assist in production line to ensure smooth production and resolve issues arising from work.

-Help to keep the production line smooth and stable so as to ensure good quality products being produced.

-Identify problems and solve them within efficient and effective time management.

-Responsive to environment changes and able to commit to OT when required for operational purposes on

weekdays / weekends.

Requirements:

-Degree or Diploma in Engineering or equivalent

-2 years of relevant experience in Manufacturing or similar industry

-Able to work in cleanroom environment.

Interested applicants please send your resume to Calista@pasona.com.sg with email subject header "Job Application for Manufacturing Engineer - CK Job ID:20226".

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Koh Siew Xing

EA Registration No: R22104418

Pasona Singapore Pte. Ltd.

EA License No:90C4069