Total 13,112 job vacancies in Singapore

Responsibilities

1. Develop design requirements for an NPU based on system-level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug any issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 5+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on experience in digital design is a must.
4. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
5. Experience in synthesis, with analysis of power, timing and area.
6. Disciplined, quality-minded, and highly driven for excellence.
7. Excellent team player and good communication skills.
8. MSEE/BSEE in Electrical Engineering or Computer Engineering.
9. Understanding of convolution operator and number system is required.
10. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
11. Experience in UVM verification methodology is a plus.
12. A plus to have SoC design experience.
13. Experience with optimizing micro-architectures for low-power and low-area is a plus.
14. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
15. Experience with past design experience with NPU / GPU / DSP design is a plus.
16. Experience with ARM or RISC-V processor systems is a plus.
17. Passionate and strong in general programming is a plus.

About the client:
Our client is a Reputed Bank.

Responsibilities:

• Design, implement, and configure OpenShift clusters and containerized applications
• Building a CI/CD pipeline for automating the provisioning and management of infrastructure components with Ansible and/or Terraform.
• Collaborating with cross-functional teams to ensure the infrastructure aligns with application requirements and organizational policies.
• Develop and maintain technical documentation related to design, configuration, usage, troubleshooting, backup, recovery, etc., for all OCP environments
• Troubleshoot Red Hat OCP configuration and services and container issues, working in collaboration with other relevant IT areas and vendor support towards a quick and effective resolution
• Work on container security solutions and ensure compliance with security policies.
• Manage OpenShift clusters for performance, availability, and capacity planning

Requirement:

• Bachelor’s degree in IT / Information Technology or any other field
• Minimum 3 years of practical experience in the implementation of OpenShift/Kubernetes environments
• Expertise with the RedHat OpenShift Container Platform/Kubernetes, Linux administration, Virtualization, Networking, and Security
• Experience in dealing with container configuration management, especially Helm and app-of-apps concepts.
• Experience working with infrastructure as code technologies such as Ansible, Terraform.
• Knowledge of application development, ideally Java Spring Boot.
• experience in CI/CD Pipeline and tools Bitbucket, Jenkins, JFrog Artifactory.

Interested candidates, who wish to apply for the above position, please send in your resume to Mohamed.basith@persolapac.com

We regret that only shortlisted candidates will be contacted.

EA License No. 01C4394
EA Personnel Reg.No. R1104824 (Samsudeen Mohamed Basith)

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.
By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolapac.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Job Description

• Industry/ Organization Type: Construction and Civil Engineering
• Position Title: Site Engineer (Building Construction)
• Working Location: Central
• Working Hours: 5.5 Days (Mon – Fri, 8:00 AM – 5:00 PM; Sat, 8:00 AM – 12:00 PM)
• Salary Package: Basic Salary
• Duration: Permanent Role

Key Responsibilities

• Assist Senior Engineers and Project Managers in monitoring project progress.
• Assist with QA/QC inspections to ensure works meet project requirements.
• Ensure safety standards are followed in the assigned work area, with support from the Safety Department.
• Supervise subcontractor works to ensure approved methods and materials are used.
• Attend progress meetings and coordinate with contractors and suppliers on project implementation matters.
• Attend site meetings when required.
• Inspect site works and monitor progress to ensure quality control and compliance with authority requirements.
• Coordinate internally with different departments and externally with clients and consultants.
• Assist in project planning, documentation, and site execution.
• Coordinate, supervise, and monitor site works, manpower deployment, material planning, and material ordering.
• Coordinate and follow up on project submissions.
• Prepare weekly site progress reports and other required submissions.
• Perform any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma or Degree in Civil Engineering, Construction Management, or a related field.
• Relevant site engineering or construction experience is preferred.
• Good understanding of site coordination, QA/QC inspection, and construction safety requirements.
• Able to read and interpret construction drawings, method statements, and project specifications.
• Good coordination and communication skills.
• Able to work independently and as part of a team.
• Proficient in Microsoft Office and relevant project documentation tools.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #10081 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description:

• Develops and optimizes BCD process technology and devices for power applications, involving TCAD simulations, device layout, characterization, and bench testing
• Develop and integrate new BCD device architectures and process modules for company BCD platforms.
• Conduct TCAD simulations to understand device behavior and calibrate simulation models to match experimental results.
• Design and lay out device test structures and new BCD device platforms.
• Analyze device performance and reliability through bench testing and data collection.
• Work with cross-functional teams, including the modeling team, to satisfy customer needs and develop advanced device models.

Job Requirement:

• Min Degree in Physics or Electrical Engineering.
• Min 3 year of expereince in TCAD (Technology Computer-Aided Design) tools for simulation and calibration.
• Experience with device layout, design rule checks, and test structure generation.
• Knowledge of BCD process development and device characterization techniques.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Oversea travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

[Job ID: 1598168]

Responsibilities

• Support the Manager in handling contracts and preparing tender documentation
• Prepare and provide budgetary cost estimates based on project requirements
• Liaise with suppliers to obtain product and service details for tender submissions
• Identify and propose solutions to technical issues during tender stages
• Coordinate with internal departments to manage documents and resolve issues
• Follow up with suppliers and contractors on billing, quantities, and submissions
• Evaluate and monitor market unit rates for materials and labor on a monthly/quarterly basis
• Prepare tender clarifications and support interview and presentation processes
• Conduct site visits and attend tender site show rounds when required
• Transfer finalized tender documents and costing details to the project team upon award
• Perform additional ad-hoc duties as assigned

Requirements

• 3–5 years of experience as a Quantity Surveyor
• Experience in a subcontractor environment is an added advantage
• Ability to manage tender processes, costing, and supplier coordination
• Willingness to attend site visits and project briefings as required

We regret that only shortlisted candidates will be notified. However, all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations:

https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Saito Ryuya

EA Personnel Reg. no.: R23116168

EA License no.: 07C5771

Job Description:

• In charge of reviewing customer drawings, specifications, and BOM, understand technical requirements.
• Responsible in providing engineering expertise to resolve and troubleshoot technical issues arise in manufacturing
• Liaise with internal and external customers on requirements and propose solutions.
• In charge of machining process cycle-time estimation and submit to the Sales team
• In charge of providing technical advice to Sale, Quality and Supply Chain team.
• Preparing markup drawings & detailed subcon scopes for the Purchasing team.
• To assess in-house capability, feasibility, and cycle-time for
• Other duties as assigned

Requirements:

• Min Diploma in Mechanical/ Manufacturing/ Precision Engineering, or equivalent.
• Minimum 3 years of working experience in Precision Industry
• Proficient in AutoCAD / SolidWorks application

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Title: CNC Maintenance Technician / Engineer (ID4686)
Location: Boon Lay
Working Hours:Monday to Friday: 9:00 AM – 7:00 PM, Saturday: 9:00 AM – 5:00 PM
(Work on 3 Saturdays per month, off on 1 Saturday)
Salary : $3000-$4000

CNC Maintenance Technician / Engineer
Key Responsibilities:
• Perform regular maintenance and inspection of CNC machines (lathe, milling, etc.)
• Troubleshoot mechanical, electrical, and control issues in CNC equipment
• Replace or repair defective components, such as servo motors, ball screws, spindles, etc.
• Maintain and calibrate CNC machines to ensure machining precision
• Work closely with the production and engineering team to ensure machine uptime
• Maintain accurate records of maintenance activities
• Comply with safety standards and company policies at all times

Job Description

Decarb Engineering & Construction Pte Ltd is a Singapore-based M&E EPC contractor specialising in Fire Protection, ACMV, and ELV systems, holding bizSAFE Star and ISO 9001/14001/45001 certifications. We are seeking a Mechanical Engineer to lead the design, engineering, and delivery of water-based and special hazards fire protection systems — including clean agent gas suppression, across commercial, industrial, data centre, and process facility projects.

Roles & Responsibilities

• Design and engineer fire protection systems: wet/dry riser, sprinkler, hose reel, hydrant, fire pump, and water storage systems.
• Lead design and delivery of special hazards systems — clean agent gaseous suppression (FM-200/HFC-227ea, Novec 1230/FK-5-1-12, inert gas/IG-541/IG-55), CO₂ systems, water mist, and aerosol/condensed aerosol suppression.
• Perform hydraulic calculations, enclosure integrity assessment, and clean agent concentration/quantity design calculations to NFPA 2001 / ISO 14520.
• Prepare design drawings, schematics, BOQs, technical submittals, and method statements for consultant and SCDF/authority approval.
• Conduct system sizing, equipment selection, and vendor/OEM coordination (e.g. cylinder banks, nozzles, detection-actuation interface).
• Oversee installation, testing, and commissioning — including room integrity (door fan) testing and discharge testing where applicable.
• Coordinate the detection-and-release interface between gas suppression and fire alarm systems.
• Ensure full compliance with SS CP 52, SS 575, SS 578, NFPA 13/14/20/2001/12/750, and SCDF requirements.
• Liaise with clients, consultants, main contractors, and authorities through design, submission, delivery, and handover.
• Provide site technical support, fault diagnosis, and resolution during execution and defects-liability periods.

Requirements

• Degree or Diploma in Mechanical Engineering or related discipline.
• 3–6 years' experience in fire protection design/engineering within the M&E or building/construction industry.
• Demonstrated experience with clean agent / gaseous suppression and special hazards systems.
• Proficiency in hydraulic calculation software (e.g. HydraCAD, Pipenet, AutoSPRINK) and AutoCAD.
• Working knowledge of Singapore fire codes (SS CP 52, SS 575, SS 578) and NFPA standards (13/14/20/2001).
• Familiarity with SCDF submission and approval processes (Qualified Person coordination, FSSD requirements).
• Strong calculation, technical documentation, and problem-solving skills.
• Experience in data centre, semiconductor, or process/industrial facilities an advantage.
• Valid Class 3 driving licence a plus.
• Good communication and coordination skills for multi-disciplinary project delivery.

Salary: Up to $5,500 + AWS + Variable Bonus + Many Benefits

Join a renowned multinational technology company specialising in advanced server and data centre solutions. This is an excellent opportunity for experienced Test Engineers who are looking to work in a fast-paced manufacturing environment with attractive benefits and career progression.

Benefits

• Up to $5,500 basic salary (depending on experience)
• Annual Wage Supplement (AWS)
• Variable Bonus
• Renowned multinational company
• Career progression and training opportunities
• Work only 14–16 days per month
• Rotating shift schedule

Responsibilities

• Lead a team of Associate Engineers and Technicians in executing production test activities for Server & Rack products.
• Configure, support and maintain PXE Server environments for production testing.
• Perform and maintain Server & Rack run-in, burn-in and power testing processes.
• Coordinate with customers, headquarters and internal engineering teams to implement, maintain and enhance test programs.
• Analyse product failures, perform root cause analysis and implement corrective actions to improve product quality and manufacturing efficiency.
• Support New Product Introduction (NPI) activities to ensure smooth product launches.
• Prepare, review and maintain work instructions, testing procedures and engineering documentation.
• Conduct training for production personnel on testing procedures and work instructions.
• Drive continuous improvement and Kaizen initiatives to enhance productivity and quality.
• Support ISO quality management system implementation and compliance activities.
• Provide engineering support during mass production to resolve testing-related issues.

Requirements

• Singaporean only
• Minimum 3 years of experience as a Test Engineer in an electronics, electrical or manufacturing environment.
• Strong understanding of manufacturing test processes, debugging and failure analysis.
• Proficient in SAP and Linux operating systems.
• Knowledge of programming and debugging techniques will be an advantage.
• Experience in Server, Rack, EMS or high-volume manufacturing environments is preferred.
• Strong analytical, problem-solving and communication skills.
• Able to work effectively with customers, regional engineering teams and cross-functional departments.
• Able to work independently, manage multiple priorities and perform well under pressure.
• Willing to work rotating shifts.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities. 

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application. 

**We regret to inform that only shortlisted candidates would be notified

Interested applicants may click APPLY NOW!

Talentvis Singapore Pte Ltd | EA License No: 04C3537
EA Personnel Name: Ong Hui Shan (Gwen) | EA Personnel No: R1767800

JOBID: 00582

Job Descriptions:

• Perform laser unit installation and alignment on laser depaneling machines.

• Configure depaneling machines according to internal specifications and customer requirements, including camera calibration, field calibration, and software debugging.

• Conduct health checks on incoming laser units and coordinate with vendors to resolve defects or delivery issues.

• Maintain records of laser parts and optical components installed on machines.

• Support laser processing experiments and studies as needed, including laser cutting trials and measurements of processed samples.

• Troubleshoot laser-related issues on deployed depaneling machines once proficient.

• Provide customer training, demonstrations, and guidance on process parameters and machine operations once proficient.

• Collaborate with internal design teams and external vendors to develop solutions for unique customer applications once proficient.

• May require up to 5% overseas travel.

Job Requirement:

• Diploma or Degree in Engineering.

• Strong interest and hands-on experience with machines.

• Minimum of 3 years of relevant work experience, with proven experience in the automation industry and working with automation machines.

• Strong knowledge of laser machines; experience in optics and laser systems is highly advantageous.

• Possession of a laser license.

• Ability to troubleshoot and provide technical solutions independently.

Please submit your updated resume in Word format by using the Apply Now Button.

We regret that only shortlisted candidates will be notified.

Email resume to che••••••••••@peopleprofilers.com

People Profilers Pte Ltd, 20 Cecil Street, #08-09 PLUS Building, Singapore 049705

Tel: 69•• •744

Posting Personnel: Ding Xin Er

EA Licence Number: 02C4944

Registration Number: R22106669

Executive Summary

Smart IMS Inc provides Digital technology & Cloud transformation services, Application & Infrastructure Management Services, Unified Communications, and Insurance implementation services to customers across the Americas, Europe, Middle East, and Asia-Pacific regions.

As the trusted technology and business partner of leading MNCs, including Global Investment Banks, Smart IMS is also a Microsoft Gold Certified Partner, Oracle Platinum Partner and AWS MSP Partner.

We currently have an opening for a Capacity Engineer (Data Center) role for our client in Singapore which is a leading global investment bank. The Data Centre Capacity Engineer is responsible for capacity planning and management across data centres and network equipment rooms.

This role ensures sufficient space, power, and cooling are available to support current operations and future growth, while maintaining resilience, compliance, and cost efficiency.

Key Responsibilities

Capacity Planning & Management

• Plan and manage data centre and network room capacity covering space, power, and cooling.
• Develop short‑, medium‑, and long‑term capacity forecasts based on IT demand and growth projections.
• Support phased load planning (e.g. IT load ramp‑up by phase).

Infrastructure Assessment

• Evaluate electrical infrastructure including UPS, transformers, PDUs, generators, and redundancy (N, N+1).
• Assess cooling infrastructure such as CRAH/CRAC units, chillers, and cooling towers to support projected IT loads.
• Identify capacity constraints, single points of failure, and mitigation options.

Design & Setup

• Support data centre and network room design, layout, and rack planning.
• Review and validate load calculations for electrical and cooling systems.
• Ensure new deployments align with data centre standards and best practices.

Tools & Inventory

• Maintain accurate capacity data in DCIM and asset management tools (e.g. Nlyte, Remedy).
• Validate inventory accuracy and ensure alignment between physical assets and system records.

Governance & Operations

• Support Method of Procedure (MOP) reviews related to capacity upgrades and changes.
• Work closely with Operations, Facilities, Network, Hosting, and Governance teams.
• Provide input to vendor designs, tenders, and technical reviews.

Reporting & Stakeholder Management

• Produce regular capacity reports and dashboards for management.
• Communicate risks, constraints, and recommendations clearly to stakeholders.

Required Skills & Experience

• Strong understanding of data centre power and cooling infrastructure.
• Experience in capacity planning for data centres and network rooms.
• Familiarity with redundancy concepts and resilience standards.
• Experience with DCIM and asset management tools.
• Ability to work across IT, facilities, and vendor teams.

Preferred Qualifications

• Background in data centre operations, facilities engineering, or infrastructure planning.
• Experience supporting large‑scale or regulated enterprise environments (e.g. financial institutions).

Sales Region: 50% Singapore and 50% Asean (Malaysia, Indonesia and Philippines)

• New customers creation. To identifying potential customers with planning and organizing sales call schedule by cold calls or given sales leads. Candidate is also required to maintain and servicing of existing customers. Address sales and engineering support goals, contributing to weekly, monthly and annual sales report, analysing expenses, identifying inconsistencies and troubleshooting issues.
• Prepare and making of product presentation, provide product application support, demonstrate or performing of Installation on the appropriate sales engineering equipment according toorders, specificities and preferences.

• Communicate with Principals (Suppliers) and Sales team together to drive for achieving sales goal. Selected candidate will be receiving product training, which may include product information, product application, maintenance, service support or deal with system breakdowns that occurred.

• Achieve related duties and responsibilities as necessary to support, organize and monitor the success of the sales engineering department and productivity. Serve customers by identifying their needs and engineering adaptations of products, equipment, andservices.

• Identifies current and future customer requirements by establishing personal rapport with potential and actual customers and others in a position to understand their different need of product or service requirements. Prepare cost estimates by studying all related customer documents, consulting with engineers and other professional personnel.

• Determines improvements by analysing cost-benefit ratios of equipment, supplies, or service applications in customer environment and engineering or proposing changes in equipment, processes, or use of materials or services. Gains customer acceptance by explaining or demonstrating cost reductions and operations improvements. Develops customer’s staff by providing technical information and training.

• Complies with local legal requirements by studying existing and new legislation and anticipating future legislation. Prepares sales engineering reports by collecting, analysing, and summarizing sales information and engineering and application trends.

• Contributes to sales engineering effectiveness by identifying short-term and long-range issues that must be addressed, recommending options and courses of action, and implementingdirectives. Contributes to team effort by accomplishing related results as needed.

Requirement:

• Minimum Diploma/Degree in Electronics/Photonics Engineering or related engineering field.
• 2 years of experience in sales industry preferred. Those without experience are welcome to apply as training will be provided

• New customer development. Ready to make cold calls. Presentation & Communication skills. Technical understanding.

• Requirements analysis & innovation. Familiar with Microsoft Office software.

Others:

• Date of Commencement: ASAP or short notice  

• Transport Allowance: SGD$80 per month

• Variable Bonus: Yes (Twice a year, May & Dec)

• Working Hours: 830am to 530pm (Mon - Fri)

• Annual Leave: 10 days (+ 1 day per year, max 16 days)

Jessica Nguyen Huynh Thanh Truc

CEI Reg. No. R23113787

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

Position Summary

We are seeking a highly organized and execution-driven Senior Marketing Communications Officer for a 12-month contract to support regional B2B marketing initiatives, administer our partner success program (BSCP), and facilitate regional sales operations. In this regional individual contributor role, you will be responsible for the seamless tactical execution of marketing campaigns, partner enablement, and sales analytics tracking across multiple time zones. This role is ideal for a self-motivated professional who excels at project coordination, stakeholder communication, and operational efficiency in a fast-paced corporate environment.

Key Responsibilities

1.Campaign & Event Execution

·        Partner Marketing Support: Coordinate and execute joint marketing activities with regional partners, including the distribution of press releases, product launch materials, and volume-driving enablement assets.

·        Event Coordination: Lead the end-to-end logistics and execution for regional marketing events (trade shows, co-branded partner seminars, webinars, and tech days), including vendor procurement, sponsorship invoicing, payment tracking, and onsite support.

·        Digital Outreach: Deploy regional product announcements, newsletters, and event invitations utilizing email marketing platforms (e.g., Optimizely).

2.Partner Program Administration (BSCP)

·        Program Operations: Manage the day-to-day operational lifecycle of the BSCP partner program, including preparing, issuing, and tracking annual agreements via DocuSign.

·        Partner Relations: Act as the primary operational point of contact for BSCP partners regarding regional training schedules, event coordination, and commercial updates.

·        Performance Tracking: Compile quarterly performance data and track sales milestone achievements for regional partners.

3.Sales Operations & Analytics Support

·        CRM& Reporting: Serve as the regional CRM power user to maintain data integrity. Update and maintain established Power BI dashboards (covering pipelines, rolling forecasts, and order books) to support sales tracking.

·        Budget Monitoring: Track and log regional marketing expenses against established budget lines to ensure financial compliance.

·        Logistics Management: Coordinate the allocation, shipping, and tracking of loaner demonstration equipment for the commercial sales team.

4.Collateral & Digital Asset Management

·        Content Localization: Coordinate with agencies and internal teams for the translation, adaptation, and distribution of marketing and communications (marcom) materials for local markets.

·        Brand Assets: Handle regional artwork and design requests for marketing collateral and oversee the sourcing and inventory of brand promotional premiums.

·        Web Maintenance: Keep local dealer locators and partner portals accurate and updated on the corporate website.

Requirements & Qualifications

·        Education: Bachelor’s degree in Marketing, Communications, Business, or a related discipline.

·        Experience: 5–8 years of relevant B2Bmarketing or marketing operations experience, preferably within a regional matrix or global corporate environment.

·        Stakeholder Coordination: Strong communication skills with a proven ability to coordinate effectively with external partners and cross-functional, multi-time-zone internal teams.

·        Technical Proficiency: Hands-on, proficiency-level experience with CRM systems, Power BI (running/updating reports), DocuSign, and email marketing automation tools.

Attributes:

Highly organized, detail-oriented, and execution-focused, with the ability to manage multiple moving parts independently.

Mechanical Engineer

• Office: King George’s (Jalan Besar / Lavender MRT)
• Project Site: TUAS areas (Transport provided for designation MRT station to site office)
• Salary: $3800 to $4500
• Working days: Mon to Fri 8/8.30am to 5/5.30pm, Sat may need works depends on site (if works 8 hours can claim allowances)
• Diploma or Degree in Mechanical Engineering or equivalent.
• Relevant ACMV or construction industry experience will be an advantage.
• Able to read engineering drawings and technical specifications.

Interested applicants can also send your resume to (Liwenpoh741#gmail.com) and allow our consultant to match you with our clients. No Charges will be incurred by Candidates for any service rendered.

WA ME 97354019 for more Mechanical Engineer role

Job scopes

• Coordinate and supervise ACMV installation works on site.
• Review engineering drawings, specifications, and technical submissions.
• Liaise with consultants, subcontractors, suppliers, and project teams.
• Monitor site progress, quality of work, and material deliveries.
• Prepare material requisitions and project documentation.
• Attend site meetings and resolve technical issues.
• Support testing, commissioning, and handover activities.
• Ensure compliance with safety, quality, and project requirements.

POH LI WEN REG NO: R25136683

THE SUPREMEHR ADVISORY PTE LTD EA NO: 14C7279

Technical Sales Engineer (Outdoor)

Working Days:  Monday to Friday
Working Hour: 8am to 5.30pm
Working Location: 3015A Ubi Rd 1, Singapore 408705
Salary: $ 4000 to $6000
 

Requirements:

• At least 1 year or more experience in the electronics field preferably in components sale
• Familiar with Semiconductor design and application 
• Class 3 driving license
• IEEE graduates an advantage but diploma holders must have electronics background
• Must have good knowledge of local electronics business and be prepared to work hard meet the company’s goals and objectives
• Understand what is a Memory, Logic, MosFets etc.. (Will provide training if needed)
   

 Job Scope:

• Drive product line & develop strategies
• Create business opportunities with potential customers
• Conduct market survey
• Prospect for new accounts
• Service existing customers
• Provide market trend feedback
• Assist in price negotiations and customer delivery issues
• Knowledge of electronic component business
• Must be able to work independently with purchasing and design engineers
• Knowledge of semiconductors (Analog / Digital)
• Technical competency
• Flexibility to work long hours if needed to finish the daily assignments or to take on a new role if needed

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

Equipment Service Engineer

Working day: Monday – Friday, 830am - 5:30pm
Salary range: $3000 - $4800
Location: Woodlands Ave (Nearest Mrt: Admiralty)

This Equipment Service Engineer will be responsible for installing, testing, and maintaining automation systems, troubleshooting and repairing electrical/electronic components, configuring software, and ensuring smooth communication with customers. They will handle support requests, coordinate with internal teams, and provide accurate service reports.

Responsibilities

• Automation system installation, testing, commissioning, and maintenance.
• Setup electronics controllers, PC, and install software.
• Perform onsite machine buy-off as per agreed customer requirements
• Analyze equipment failures and identify root causes to effectively repair equipment failures.
• Able to analyze electrical/electronic circuit, read machine logfiles to identify root cause for the problem
• Able to repair electrical components, setup robot software, PC software.
• Establish a seamless interface between customers and the company.
• Demonstrate high integrity and work independently with minimal supervision.
• Spearhead customer issues and coordinate with internal departments and customer stakeholders to resolve them efficiently. Escalate to management if necessary.
• Respond to phone support and onsite support requests in accordance with SLA.
• Prepare and present accurate, detailed service reports in a timely manner.

Job Requirement:

• Diploma or Bachelor’s degree in Electronics, Computer Engineering or equivalent
• Min 3 years or more of experience in automation systems setup or service support
• Proficiency in electrical components such as servo motors and robots
• Proficiency in installing software, configuration and setting up PCs and machines
• Ability to read equipment log files and process flows to debug machine breakdowns
• Willingness to travel for overseas assignments on short notice.

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

The Job:

• Lead and develop a team of maintenance and call back technicians, train, assess, optimise the resources
• Perform the yellow belt technical assessment for the technicians and guide green and red belters to be prepared for their assessment
• Coordinate subcontractor works and audit their work quality standards
• Carry out feasibility study, health checks and standardization project
• Provide technical support for internal staff from Service, Project, Sales and Sales Engineering Department

Interested applicants can send their detailed resumes to janelui@recruitexpress.com.sg or call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg.No. 199601303W || EA Licence No. 99C4599

Key Responsibilities:

• Implement, maintain, and administer IT infrastructure including networks, operating systems, storage, and backup systems
• Collaborate with system development teams on system design, implementation, integration, and testing
• Provide 24x7 on-call support on a rotational basis, including executing corrective actions to resolve production issues and minimize system downtime
• Develop and maintain technical and program documentation to support effective planning and execution
• Liaise with customers and external vendors to troubleshoot and resolve technical issues

Requirements:

• Minimum of 3–5 years of relevant working experience
• Bachelor's Degree Holder
• Solid understanding of IT infrastructure, including operating systems and networking
• Strong interest in emerging technologies and a willingness to continuously upgrade skillsets

(EA Reg No: 20C0312)
Please email a copy of your detailed resume to qianyu@talentsis.com.sg  for immediate processing.

Only shortlisted candidates will be notified.

Title: Senior Marketing, Branding & Corporate Communications Consultant

Engagement Type: Consultancy / Independent Contractor

Position Overview

We are seeking a highly experienced, creative, and proactive Senior Marketing, Branding & Corporate Communications Consultant to strengthen and elevate our corporate brand presence. The ideal candidate will be an independent professional with a strong background in branding, corporate communications, content creation, and visual design, capable of aligning all marketing initiatives with the company's vision, values, and strategic objectives.

The consultant will be expected to anticipate business needs, proactively propose innovative ideas, and deliver high-quality work within agreed timelines with minimal supervision.

Key Responsibilities

• Develop and execute branding, marketing, and corporate communication strategies.
• Ensure alignment of all marketing and communication activities with the company's vision, mission, and brand identity.
• Manage and enhance the company's brand presence across digital and traditional channels.
• Create, manage, and publish professional LinkedIn content, including corporate announcements, thought leadership articles, campaign posts, and employee engagement initiatives.
• Design and produce creative artworks for corporate events, holidays, achievements, campaigns, and internal communications while strictly following brand guidelines.
• Develop and maintain brand standards to ensure consistency across all communications and visual materials.
• Prepare and review press releases, media statements, corporate presentations, newsletters, and executive communications.
• Manage website content and collaborate on website improvements to ensure consistency with corporate branding.
• Create and edit marketing materials using Adobe Photoshop, Illustrator, and related design tools.
• Support public relations and media engagement initiatives.
• Work closely with management to identify communication opportunities and strengthen corporate reputation.
• Monitor industry trends and recommend innovative marketing and branding initiatives.
• Anticipate communication and branding requirements before they arise and proactively propose solutions.

Qualifications & Experience

• Bachelor's degree in Marketing, Communications, Journalism, Public Relations, Branding, Graphic Design, or a related field.
• Minimum 5 years of experience in senior marketing, branding, corporate communications, or related consultancy roles.
• Strong knowledge of journalism, media communications, storytelling, and corporate messaging.
• Proven experience managing corporate LinkedIn pages and professional social media communications.
• Advanced proficiency in Adobe Photoshop, Illustrator, and other creative design tools.
• Experience managing and coordinating website content and digital brand presence.
• Demonstrated expertise in preparing press releases, executive communications, and corporate announcements.
• Exceptional English writing, editing, proofreading, and grammar skills.
• Strong portfolio showcasing branding projects, campaigns, publications, and creative work.

Preferred Qualifications

• Previous experience within shipping, maritime, logistics, transportation, or international trade industries is a strong advantage.
• Experience working with multinational organizations and diverse stakeholders.
• Knowledge of digital marketing, SEO, content strategy, and corporate reputation management.

Key Competencies

• Exceptional attention to detail.
• Creative and innovative mindset with the ability to generate fresh ideas.
• Strong business acumen and understanding of corporate branding.
• Excellent organizational and project management skills.
• Ability to work independently and take full ownership of projects.
• Proactive, solution-oriented, and capable of anticipating business needs.
• Strong interpersonal and stakeholder management skills.
• Commitment to delivering projects on time and often ahead of deadlines.
• High standards of professionalism, quality, and accuracy.

Candidate Requirements

• Fluent English (written and spoken).
• Outstanding communication and presentation skills.
• Strong professional portfolio demonstrating successful brand development, communications, and creative design projects.
• Ability to function as a strategic advisor and trusted consultant to senior leadership.
• Proven track record of delivering measurable brand and communication results.

• Drive sales growth by promoting power supply and test solutions, including AC/DC sources and programmable systems.
• Identify new business opportunities across industries such as electronics, R&D, automation, EV, and renewable energy, while expanding existing accounts.
• Provide technical consultation — interpreting customer requirements, recommending configurations, and conducting product demos.
• Act as the primary contact for both technical and commercial matters, ensuring smooth pre‑sales and after‑sales support.
• Coordinate with internal teams to fulfil orders, troubleshoot issues, and gather market insights for product improvement.

Requirements:

• Diploma in Electrical & Electronic Engineering, Power Electronics, or related field.
• At least 3 years of experience in technical sales within power electronics, test & measurement equipment, or industrial/medical power supply solutions.
• Familiarity with AC/DC systems, programmable power supplies, and electrical specifications.
• Strong communication, presentation, and customer engagement skills.
• Self‑driven, target‑oriented, and willing to travel for client visits.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Responsibilities:

• Develop, validate, and maintain special process procedures (e.g., heat treatment, surface treatment, coatings, welding, brazing)
• Perform process capability studies and continuous improvement initiatives
• Ensure compliance with aerospace standards and customer requirements
• Assist the Manager in day-to-day process monitoring and production requirement
• Perform other duties and responsibilities, as assigned

Job Requirements:

• Minimum 3 years of relevant experience in an Aerospace or Manufacturing environment

Interestedapplicants can send their detailed resumes to janelui@recruitexpress.com.sgor call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg.No. 199601303W || EA Licence No. 99C4599

A customer-facing engineering role for someone who enjoys solving real-world deployment and integration problems, and who can build or adapt systems to close the gap between a product and what customers actually need in the field.

Responsibilities

• Work directly with customers to understand deployment challenges and translate them into engineering solutions
• Identify gaps between the product and real-world use cases, then build or adapt systems to close them
• Collaborate across internal teams to integrate solutions end-to-end across hardware and software
• Improve product reliability, usability, and performance based on live deployment feedback
• Contribute to platform and product improvements informed by field experience
• Act as the technical bridge between internal R&D and external client needs

Requirements

Must-Have:

• Strong software engineering foundation with experience shipping production systems
• Customer-facing experience or comfort working directly with external stakeholders
• Ability to diagnose problems across hardware and software boundaries
• Self-directed problem solver who thrives in ambiguity
• Genuine interest in deep tech, AI, or applied engineering

Nice-to-Have:

• Experience with SaaS product delivery or technical consulting
• Familiarity with simulation, autonomous systems, or robotics
• Proficiency in Python, C++, or similar systems-level tooling

Additional Information

• Flat organisational structure with direct access to leadership
• Equity compensation (ESOP with vesting)
• Performance bonuses twice a year, including during probation (pro-rated)
• Flexible leave policy

Apply directly on our website: https://tysonjay.sg/jobs/solutions-engineer-singapore/

Tyson Jay Management Pte Ltd | EA License No.: 24C2479
Ivan Lim | EA Personnel No.: R1109856

The Job:

• Perform process planning and fixture & gauge designs
• Handle quotations and program management
• Apply Six Sigma/Lean Manufacturing methodologies for continuous process improvements
• Planning and scheduling of ERP system

Requirements:

• Machining process, fixture/gauge/tool design
• Degree in Mechanical Engineer or related field with minimum 2-3 years of work experience

Interestedapplicants can send their detailed resumes to janelui@recruitexpress.com.sgor call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg.No. 199601303W || EA Licence No. 99C4599

Job Description

At Bank of America, we are guided by a common purpose to help make financial lives better through the power of every connection. We do this by driving Responsible Growth and delivering for our clients, teammates, communities and shareholders every day.

Being a Great Place to Work and providing a culture of caring is core to how we drive Responsible Growth. We are intentional about fostering an inclusive workplace where every teammate has the opportunity to succeed, build a career and contribute to our shared success. This includes attracting and developing exceptional talent, recognizing and rewarding performance, and supporting our teammates’ physical, emotional, and financial wellness through affordable, competitive and flexible benefits.

We value the unique perspectives individuals bring from all backgrounds and career paths - whether shaped by military service, community college education, or a wide range of work and life experiences. These journeys foster resilience, leadership and innovation, strengthening our workforce and positively impact the communities we serve.

Bank of America is committed to an in-office culture that supports collaboration, engagement, and career development. Our approach includes clear in-office expectations, while providing an appropriate level of flexibility based on role-specific responsibilities and business needs.

At Bank of America, you can build a successful career with opportunities to learn, grow, and make an impact. Join us!

Job Description:

Global Funding (Treasury) technology team is looking for a senior engineer to join our team. The role will cover Development as well as Level 3 support within the APAC team. The team is working on multiple deliverables, and you will therefore need to be agile in moving between roles and projects.

As an example, with the developer role, we are currently building a new modern trade entry platform that covers FX, Money Market products from trade capture through to settlement to enable us to decommission a legacy platform.

In the Level 3 support role you will be expected to help troubleshoot production issues in a timely manner whilst ensuring minimal business impact, this will require liaising with regional and global teams. The L3 role will be APAC hours focused.

You will have the skillset to be both self-driven/independent as well as working within the global teams/agile teams in support of the various deliverables in flight.

Responsibilities:

• Ensure all requirements, process artefacts, and acceptance criteria support predictable delivery and mitigate risk, including early identification of gaps, impacts, and potential failure points.

• Proactively inform and align support partners of upcoming changes, ensuring they understand impacts, risks, and required actions to maintain production stability.

• Support testing and quality assurance by participating in functional reviews, clarifying requirements, identifying defects early, and ensuring quality standards are met before delivery.

• Creative, quick-thinking and an aptitude for solving problems with technology.

• Excellent debugging and problem-solving skills that exhibit a willingness to take ownership with enthusiasm in the face of technical challenges.

Required Skills:

• Minimum 5 years or more working experience as software engineer

• Prior experience of relational databases

• Bachelor degree in Computer Science or other engineering degree

• Good communication skills and experience in working in a virtual/global team. 

• Demonstrate advanced proficiency in python.

• Extensive experience of using design and architectural patterns

• Experience in agile development (e.g. XP, SCRUM) and with CI/CD tools

• Experience in Web UI (Angular, NodeJS, Spring, REST)

• Strong communication skills, written and verbal.

• Experience interacting with Business product owners and end users to define new software requirements and triage any issues that arise.

Desired Skills

• Financial Services/Banking experience

• Understanding of various financial instruments Interest rate swaps, FX swap and bond is preferred but not required

• CI/CD, JIRA, Bitbucket, Ansible, Jenkins

• Scripting language knowledge like Perl or Python

• Experience of working on Quartz and remote risk is a plus